# Boeing Special Attention Service Bulletin 747-25-3653: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0188; AD 2019-22-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 747-25-3653](https://openairdocs.org/service-documents/boeing/sb-747-25-3653.md)
- Title as filed: SB-747-25-3653-01--
- Pages: 76
- PDF: https://openairdocs.org/files/sha256/f3/cd/f3cdd926fefd50a8c9969cc1c2d3fecf9634e59289ddf636bfb03fa26572d5a6
- Page: https://openairdocs.org/service-documents/boeing/sb-747-25-3653/file/f3cdd926fefd

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Number: 747-25-3653
Original Issue: August 04, 2017
Revision 1: October 19, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seats - Horizontal Movement System Inspection and Overhaul
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
1 of 76
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
2 of 76
BOEING SERVICE BULLETIN 747-25-3653
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 34
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 35
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 37
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS
- REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1 -
CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL
MOVEMENT SYSTEM [Group 1, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . 58
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2 -
FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL
MOVEMENT SYSTEM  [Group 1, Configuration 1-2] . . . . . . . . . . . . . . . . . . . . . 61
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
3 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 4

APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION
AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 2, 4]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4 -
FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1,
Configuration 3-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 5: WORK PACKAGE 5 -
CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
[Group 1, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 6: WORK PACKAGE 6 -
FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL MOVEMENT
SYSTEM [Group 1, Configuration 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
APPENDIX G: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 7: WORK PACKAGE 7 -
CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND
CHECK OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 2, 4] . . . 72
APPENDIX H: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 8: WORK PACKAGE 8 -
FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION
AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 3-4] . 74
APPENDIX I: CAPTAIN'S AND FIRST OFFICER'S SEATS, PART NUMBER SERIES 3A258, HORIZONTAL
MOVEMENT SYSTEM - HORIZONTAL ACTUATOR LOCATION [Group 1, Configuration 2-4]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
4 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 5

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 747-25-3653Original Issue: August 04, 2017
Revision 1: October 19, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seats - Horizontal Movement System Inspection and Overhaul
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to add more information and to better describe the conditions of and the serviceable definition
for Ipeco pilot's seats. Also, the newest issue numbers of the Ipeco service bulletins, which correct errors in their
work instructions, are specified in this revision. And, added a note clarifying spare seat installation.
These sections were changed:
1. Summary, Background: Added the manufacturer name 'Artus' for part number 'AD865050( )'. Removed
compliance time information.
2. Paragraph 1.B., Concurrent Requirements: Changed the issue number of each Ipeco service bulletin.
3. Paragraph 1.C., Reason: Added the manufacturer name 'Artus' for part number 'AD865050( )'. Removed
compliance time information. Added Revision 1 information.
4. Paragraph 1.D., Description: Added Revision 1 information.
5. Paragraph 1.E., Compliance: Changed footnote (a) of Tables 3, 4, 7 and 8. Changed 'Condition 1' and
'Condition 2' in Tables 1 thru 4. Changed 'Condition 4' in Tables 3, 4, 7 and 8. Added footnote (a) to
Condition 3 (Action 2)' in Tables 3 and 4. In Tables 5, 6, 7 and 8, changed start reference point from
a PART to WORK PACKAGE. Table 1, 2, 3, and 4, added footnote for spare seat installation.
6. Paragraph 1.G., Manpower: Added a task and footnote to the table of Work Packages 7 and 8.
7. Paragraph 1.J.1., Existing Data: Added Aircraft Maintenance Manual (AMM) reference.
8. Paragraph 2.C.2., Parts and Materials Supplied by the Operator: Added applicability. Changed
information. Added two footnotes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
5 of 76

### Page 6

9. Paragraph 2.C.3., Parts Modified and Reidentified: Changed information. Added seat assembly part
number suffixed with 'Z', which is the new part number for a changed seat assembly. Add one footnote.
10. Paragraph 3.A., General Information: Changed three notes.
11. Paragraph 3.B., Work Instructions: Added a note related to the seat removal instruction in Part 1 and
Part 2. Removed issue information from the Ipeco service bulletin references and added footnote (a)
to the tables of Part 1 thru 4, 7 and 8. Added more information to the instructions of Part 5 and 6.
Changed an instruction of Part 1, Part 2, Part 3 and Part 4. Added a note for each 'install a serviceable
seat' instruction to refer to the serviceable definition in Paragraph 3.A., General Information. Changed
the instruction for 'Condition 3 (Action 2)' of Work Packages 7 and 8. Changed the action for 'Condition
3' of Work Packages 3 and 4. Changed 'Condition 1', 'Condition 2' and 'Condition 4'. WORK PACKAGE
1, 2, 3, and 4, added note for spare seat installation.
12. Figure 1 and Figure 2: Added AMM reference.
13. Appendix A and Appendix B: Changed the description of 'Condition 1' and 'Condition 2'.
14. Appendix C and Appendix D: Changed the action of 'Condition 3' of logic diagram. Changed the
description of 'Condition 1', 'Condition 2', Condition 4 and flag note (a).
15. Appendix G and Appendix H: Changed the action of 'Condition 3 (Action 2)' of logic diagram. Changed
the description of Condition 4 and flag note (a).
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
August 04, 2017Original Issue:
October 19, 2018Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
6 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 7

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 747-25-3653Original Issue: August 04, 2017
Revision 1: October 19, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seats - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats will have
un-commanded seat movement because of horizontal actuator shaft failure. If this service bulletin is not done,
the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s) could break and cause an
un-commanded seat movement. Un-commanded seat movement could lead to reduced controllability of the
airplane.
An operator reported the Captain's seat could not be locked in position after the horizontal position of the seat
was adjusted in flight. The seat became unlocked from the track and moved freely forward and aft. Control was
given to the First Officer for approach and landing. An inspection found the horizontal actuator output shaft had
broken. When the horizontal actuator output shaft breaks, pilot's cannot prevent seat movement in a forward
and aft direction and cannot lock the seat in position. A broken shaft is the result of high loads, that are more
than design limits, from a stalled motor, that can occur due to high mechanical resistance to motion during
powered operation of the seat. Any object that can potentially impede seat movement (Foreign Object Debris
(FOD)) in the seat tracks is another condition that can result in a stalled motor and cause the horizontal actuator
output shaft to break.
This service bulletin gives instructions for airplanes with powered Ipeco part number series 3A090 Captain's
seat or First Officer's seat installed, corrective actions are necessary by an off-airplane inspection of the seat
by the applicable Ipeco service bulletin. Repeat on-airplane checks, at intervals not to exceed 36 months, are
necessary for the Captain's and First Officer's seats by the applicable Ipeco service bulletin.
This service bulletin gives instructions for airplanes with Ipeco part number series 3A258 Captain's seat or First
Officer's seat installed, to find the part number and 'amendment' of the horizontal actuator of the Horizontal
Movement System (HMS). If the horizontal actuator has Artus part number AD8650503 at 'Amendment B' or
earlier or Artus part number AD8650502, corrective actions are necessary by an off-airplane inspection of the
seat by the applicable Ipeco service bulletin, where signs of damage to the HMS make the replacement of the
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
7 of 76

### Page 8

horizontal actuator necessary. If the actuator continues to be Artus part number AD8650503 at 'Amendment B'
or earlier or Artus part number AD8650502, repeat on-airplane inspections are necessary for the Captain's and
First Officer's seats by the applicable Ipeco service bulletin. Installation of a horizontal actuator, Artus part number
AD8650503 at 'Amendment C' or later, will significantly decrease the risk of a broken horizontal actuator output
shaft.
Boeing Service Related Problem (SRP) 747-SRP-25-0306 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 25-12003 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., ComplianceYesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
YesSpecial Tooling Required
ACTION (PRR 85901-136S)
Do inspections and checks of the Captain's and First Officer's seats. Do corrective actions.
EFFECTIVITY
747-200B/200C/200F/300/400/400D/400F/8/8F Airplanes equipped with Ipeco part number series 3A090 and
3A258 Captain's and First Officer's powered seats. Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplanes.
Refer to Paragraph 1.A.2., Spares Affected for the list of affected components.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
8 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 9

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
9 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 10 (OCR)

BOEING SERVICE BULLETIN 747-25-3653
FIRST OFFICER'S
SEAT
- CAPTAIN'S
DO INSPECTIONS AND CHECKS OF THE
CAPTAIN'S AND FIRST OFFICER'S SEATS.
FWD  DO CORRECTIVE ACTIONS.
CAPTAIN'S SEAT
(FIRST OFFICER'S SEAT OPPOSITE)  (TYPICAL)  2383465
Original Issue: August 04, 2017
Revision 1: October 19, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-25-3653
Work - See page 1 for details.  10 of 76

### Page 11

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Number: 747-25-3653
Original Issue: August 04, 2017
Revision 1: October 19, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seats - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 747-200B, 747-200C, 747-200F, 747-300, 747- 400, 747-400D,
747-400F, 747-8 and 747-8F Airplanes equipped with Ipeco part number series 3A090 and 3A258
Captain's and First Officer's powered seats, line number 699 and on, in 1 Group. The Variable
Numbers and Group Information for the applicable airplanes is given below. An equivalent change
is on subsequent production airplanes. Refer to PRR 85901-136S for data about this change.
NOTE: The Variable Number table below includes all affected airplanes up to Line Number 1553.
Affected airplanes after Line Number 1553 will be added to the service bulletin's
MyBoeingFleet.com (MBF) "get effectivity" result when they are added to the MBF Fleet
Profile Page.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
11 of 76

### Page 12

DESCRIPTIONCONFIGURATIONGROUP
747-200B/200C/200F/300/400/400D/400F/8/8F Airplanes equipped
with powered Ipeco Captain's and First Officer's seats.
-1
Airplanes equipped with powered Ipeco Captain's seat, part number
series 3A090 and powered Ipeco First Officer's seat, part number
series 3A090.
1
Airplanes equipped with Ipeco Captain's seat, part number series
3A258 and powered Ipeco First Officer's seat, part number series
3A090.
2
Airplanes equipped with powered Ipeco Captain's seat, part number
series 3A090 and Ipeco First Officer's seat, part number series 3A258.
3
Airplanes equipped with Ipeco Captain's seat, part number series
3A258 and Ipeco First Officer's seat, part number series 3A258.
4
Airplane Models:
747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747-8, 747-8F
GroupVariable Number
1RB421
1RC001 - RC009
1RC021 - RC040
1RC051 - RC060
1RC066 - RC072
1RC501 - RC514
1RC521 - RC528
1RC531 - RC541
1RC546 - RC566
1RC571 - RC582
1RC601 - RC609
1RC641 - RC644
1RC651 - RC652
1RC661
1RC671 - RC672
1RC674
1RF001 - RF006
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
12 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 13

GroupVariable Number
1RJ321 - RJ322
1RL401 - RL403
1RL411 - RL436
1RL451 - RL456
1RL461 - RL462
1RL471 - RL481
1RL491 - RL492
1RL501 - RL502
1RL511 - RL516
1RL521 - RL522
1RL531 - RL534
1RL551
1RL561
1RL563 - RL568
1RL571 - RL572
1RL576 - RL577
1RL579
1RL581 - RL586
1RL651 - RL655
1RL671 - RL675
1RL681 - RL684
1RL751 - RL752
1RM001 - RM007
1RM010 - RM013
1RM021 - RM024
1RM026 - RM030
1RM036
1RM038 - RM045
1RM051 - RM053
1RM071
1RM081 - RM084
1RM091
1RM116 - RM117
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
13 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 14

GroupVariable Number
1RM126 - RM132
1RM146 - RM147
1RM156 - RM158
1RM192
1RM231 - RM233
1RM316 - RM318
1RM331 - RM333
1RM341
1RM351 - RM355
1RM366 - RM367
1RM401 - RM403
1RM426
1RM431
1RM441 - RM443
1RM445
1RM801 - RM803
1RM851 - RM855
1RM859
1RM861 - RM862
1RM871 - RM899
1RM901 - RM906
1RM911
1RR024 - RR025
1RR451
1RR701
1RR721 - RR723
1RR746 - RR748
1RR851 - RR856
1RR861 - RR862
1RS331 - RS333
1RS762
1RT001 - RT006
1RT010 - RT014
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
14 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 15

GroupVariable Number
1RT021 - RT022
1RT031 - RT034
1RT045
1RT061
1RT071 - RT072
1RT074
1RT101 - RT103
1RT135 - RT137
1RT151
1RT161 - RT166
1RT168
1RT440
1RT442 - RT447
1RT501 - RT525
1RT527 - RT528
1RT530 - RT535
1RT571 - RT576
1RT578 - RT581
1RT583
1RT585
1RT587 - RT588
1RT590
1RT631 - RT634
1RT636 - RT638
1RT641 - RT648
1RT651 - RT657
1RT681 - RT682
1RT691 - RT699
1RT701
1RT704
1RT717
1RT743 - RT757
1RT776 - RT777
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
15 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 16

GroupVariable Number
1RT781 - RT784
1RT801 - RT803
1RT811 - RT814
1RT831 - RT834
1RT837
1RT861 - RT864
1RT876 - RT880
1RT931
1RT947 - RT949
1RT951 - RT955
1RT966 - RT967
1RU002 - RU006
1RU016 - RU017
1RU031 - RU032
1RU061 - RU062
1RU081 - RU083
1RU101
1RU803
1RU805
1RU808 - RU809
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
3A090-0027-01-1
3A090-0028-01-1
3A090-0055-01-1
3A090-0056-01-1
3A090-0065-01-1
3A090-0066-01-1
3A090-0075-01-1
3A090-0076-01-1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
16 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 17

Part Number
3A090-0079-01-1
3A090-0080-01-1
3A090-0081-01-1
3A090-0082-01-1
3A258-0041-01-1
3A258-0042-01-1
B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 097-25-04, Issue 2(a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 097-25-03, Issue 2(a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 107-25-05, Issue 3(c)(d)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 107-25-04, Issue 3(c)(d)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 112-25-04, Issue 2(e)(f)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 112-25-03, Issue 2(e)(f)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 209-25-04, Issue 2(g)(h)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 209-25-03, Issue 2(g)(h)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 211-25-06, Issue 2(i)(j)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 211-25-05, Issue 2(i)(j)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 212-25-06, Issue 2(k)(l)Ipeco Holdings Ltd
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
17 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 18

DescriptionService BulletinCompany
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 212-25-05, Issue 2(k)(l)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 258-25-14, Issue 4(m)(n)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 258-25-13, Issue 3(m)(n)Ipeco Holdings Ltd
(a) Applicable to Captain's seat part number 3A090-0027-01-1.
(b) Applicable to First Officer's seat part number 3A090-0028-01-1.
(c) Applicable to Captain's seat part number 3A090-0055-01-1.
(d) Applicable to First Officer's seat part number 3A090-0056-01-1.
(e) Applicable to Captain's seat part number 3A090-0065-01-1.
(f) Applicable to First Officer's seat part number 3A090-0066-01-1.
(g) Applicable to Captain's seat part number 3A090-0075-01-1.
(h) Applicable to First Officer's seat part number 3A090-0076-01-1.
(i) Applicable to Captain's seat part number 3A090-0079-01-1.
(j) Applicable to First Officer's seat part number 3A090-0080-01-1.
(k) Applicable to Captain's seat part number 3A090-0081-01-1.
(l) Applicable to First Officer's seat part number 3A090-0082-01-1.
(m) Applicable to Captain's seat part number 3A258-0041-01-1.
(n) Applicable to First Officer's seat part number 3A258-0042-01-1.
C. Reason
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats
will have un-commanded seat movement because of horizontal actuator shaft failure. If this service
bulletin is not done, the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s)
could break and cause an un-commanded seat movement. Un-commanded seat movement could lead
to reduced controllability of the airplane.
An operator reported the Captain's seat could not be locked in position after the horizontal position of
the seat was adjusted in flight. The seat became unlocked from the track and moved freely forward
and aft. Control was given to the First Officer for approach and landing. An inspection found the horizontal
actuator output shaft had broken. When the horizontal actuator output shaft breaks, pilot's cannot
prevent seat movement in a forward and aft direction and cannot lock the seat in position. A broken
shaft is the result of high loads, that are more than design limits, from a stalled motor, that can occur
due to high mechanical resistance to motion during powered operation of the seat. Any object that can
potentially impede seat movement (Foreign Object Debris (FOD)) in the seat tracks is another condition
that can result in a stalled motor and cause the horizontal actuator output shaft to break.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
18 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 19

This service bulletin gives instructions for airplanes with powered Ipeco part number series 3A090
Captain's seat or First Officer's seat installed, corrective actions are necessary by an off-airplane
inspection of the seat by the applicable Ipeco service bulletin. Repeat on-airplane checks, at intervals
not to exceed 36 months, are necessary for the Captain's and First Officer's seats by the applicable
Ipeco service bulletin.
This service bulletin gives instructions for airplanes with Ipeco part number series 3A258 Captain's
seat or First Officer's seat installed, to find the part number and 'amendment' of the horizontal actuator
of the Horizontal Movement System (HMS). If the horizontal actuator has Artus part number AD8650503
at 'Amendment B' or earlier or Artus part number AD8650502, corrective actions are necessary by an
off-airplane inspection of the seat by the applicable Ipeco service bulletin, where signs of damage to
the HMS make the replacement of the horizontal actuator necessary. If the actuator continues to be
Artus part number AD8650503 at 'Amendment B' or earlier or Artus part number AD8650502, repeat
on-airplane inspections are necessary for the Captain's and First Officer's seats by the applicable Ipeco
service bulletin. Installation of a horizontal actuator, Artus part number AD8650503 at 'Amendment C'
or later, will significantly decrease the risk of a broken horizontal actuator output shaft.
Boeing Service Related Problem (SRP) 747-SRP-25-0306 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 25-12003 is related to this service bulletin.
Revision 1 is sent to add more information and to better describe the conditions of and the serviceable
definition for Ipeco pilot's seats. Also, the newest issue numbers of the Ipeco service bulletins, which
correct errors in their work instructions, are specified in this revision.
D. Description
Do inspections and checks of the Captain's and First Officer's seats. Do corrective actions.
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
221, 222747-200B, 747-200C, 747-200F,
747-300, 747-400, 747-400D,
747-400F, 747-8, 747-8F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Group 1, Configuration 1:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A, APPENDIX B, APPENDIX E and APPENDIX F.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
19 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 20

Group 1, Configuration 2:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
B, APPENDIX C, APPENDIX F and APPENDIX G.
Group 1, Configuration 3:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A, APPENDIX D, APPENDIX E and APPENDIX H.
Group 1, Configuration 4:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
C, APPENDIX D, APPENDIX G and APPENDIX H.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all the ACTION
numbers for that CONDITION number or OPTION number.
Group 1, Configuration 1, 3:
Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original
Issue date of this
service bulletin.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
DETAILED INSPECTION
All Airplanes.
-Before further
flight.
CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 5.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 5.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
20 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 21

Group 1, Configuration 1, 3:
Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
NOT PASSED (ANY FINDINGS) -Within 120 days
after PART 1 was
done.
OPTION 1 (ACTION 2):
Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL(a)
Refer to Paragraph
1.E., Compliance
Table 5.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 5.
-Before further
flight.
OPTION 2 (ACTION 1):
Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL(a)
Refer to Paragraph
1.E., Compliance
Table 5.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 5.
(a) It is permitted to install a spare seat that has passed PART 1 or done PART 3.
Group 1, Configuration 1-2:
Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original
Issue date of this
service bulletin.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM DETAILED INSPEC-
TION
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
21 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 22

Group 1, Configuration 1-2:
Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 6.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 6.
-Before further
flight.
OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
NOT PASSED (ANY FINDINGS) -Within 120 days
after PART 2 was
done.
OPTION 1 (ACTION 2):
Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(a)
Refer to Paragraph
1.E., Compliance
Table 6.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 6.
-Before further
flight.
OPTION 2 (ACTION 1):
Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(a)
Refer to Paragraph
1.E., Compliance
Table 6.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 6.
(a) It is permitted to install a spare seat that has passed PART 2 or done PART 4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
22 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 23

Group 1, Configuration 2, 4:
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original
Issue date of this
service bulletin.
Do PART 5: CAPTAIN'S
SEAT, PART NUMBER
SERIES 3A258 - HORI-
ZONTAL ACTUATOR
IDENTIFICATION
All Airplanes.
-Before further
flight.
CONDITION 3 (AC-
TION1): Make sure the
seat tracks are clear of
FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER
-CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Within 36 months
after the Original
Issue date of this
service bulletin.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
DETAILED INSPECTION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER, OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND AMEND-
MENT CANNOT BE FOUND
-Before further
flight.
CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 7.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 7.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
23 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 24

Group 1, Configuration 2, 4:
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
NOT PASSED (ANY FINDINGS) -Within 120 days
after PART 1 was
done.
OPTION 1 (ACTION 2):
Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL(b)
Refer to Paragraph
1.E., Compliance
Table 7.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 7.
-Before further
flight.
OPTION 2 (ACTION 1):
Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL(b)
Refer to Paragraph
1.E., Compliance
Table 7.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 7.
-Before further
flight.
OPTION 3: Install a ser-
viceable seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance with
this service bulletin.
(b) It is permitted to install a spare seat that has passed PART 1 or done PART 3.
Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original
Issue date of this
service bulletin.
Do PART 6: FIRST OFFI-
CER'S SEAT, PART
NUMBER SERIES 3A258
- HORIZONTAL ACTUA-
TOR IDENTIFICATION
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
24 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 25

Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
CONDITION 3 (AC-
TION1): Make sure the
seat tracks are clear of
FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER
-CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Within 36 months
after the Original
Issue date of this
service bulletin.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM DETAILED INSPEC-
TION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER, OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND AMEND-
MENT CANNOT BE FOUND
-Before further
flight.
CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 8.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 8.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
25 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 26

Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SERVICE
BULLETIN, PART A - INSPECTION' IS
NOT PASSED (ANY FINDINGS) -Within 120 days
after PART 2 was
done.
OPTION 1 (ACTION 2):
Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(b)
Refer to Paragraph
1.E., Compliance
Table 8.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 8.
-Before further
flight.
OPTION 2 (ACTION 1):
Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(b)
Refer to Paragraph
1.E., Compliance
Table 8.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 8.
-Before further
flight.
OPTION 3: Install a ser-
viceable seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., Gen-
eral Information, is a terminating action to the repeat inspections for the First Officer's seat in accordance
with this service bulletin.
(b) It is permitted to install a spare seat that has passed PART 2 or done PART 4.
Group 1, Configuration 1, 3:
Table 5: WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.Within 36 months
after WORK
PACKAGE 1 was
accomplished.
Do PART 7: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
ON AIRPLANE CHECKS
AND CORRECTIVE AC-
TION
All airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
26 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 27

Group 1, Configuration 1-2:
Table 6: WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZON-
TAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.Within 36 months
after WORK
PACKAGE 2 was
accomplished.
Do PART 8: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM ON AIRPLANE
CHECKS AND CORREC-
TIVE ACTION
All airplanes.
Group 1, Configuration 2, 4:
Table 7: WORK PACKAGE 7 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.(a)Within 36 months
after WORK
PACKAGE 3 was
accomplished.
Do PART 5: CAPTAIN'S
SEAT, PART NUMBER
SERIES 3A258 - HORI-
ZONTAL ACTUATOR
IDENTIFICATION
All airplanes.
-Before further
flight.
CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER --CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Before further
flight.
OPTION 1: Do PART 7:
CAPTAIN'S SEAT -
HORIZONTAL MOVE-
MENT SYSTEM ON AIR-
PLANE CHECKS AND
CORRECTIVE ACTION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER, OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND AMEND-
MENT CANNOT BE FOUND
OPTION 2: Install a ser-
viceable seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance with
this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
27 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 28

Group 1, Configuration 3-4:
Table 8: WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.(a)Within 36 months
after WORK
PACKAGE 4 was
accomplished.
Do PART 6: FIRST OFFI-
CER'S SEAT, PART
NUMBER SERIES 3A258
- HORIZONTAL ACTUA-
TOR IDENTIFICATION
All airplanes.
-Before further
flight.
CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER --CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Before further
flight.
OPTION 1: Do PART 8:
FIRST OFFICER'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM ON AIR-
PLANE CHECKS AND
CORRECTIVE ACTION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUMBER
AD8650503 AT 'AMENDMENT C' OR
LATER, OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND AMEND-
MENT CANNOT BE FOUND
OPTION 2: Install a ser-
viceable seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., Gen-
eral Information, is a terminating action to the repeat inspections for the First Officer's seat in accordance
with this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
28 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 29

• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Group 1, Configuration 1, 3:
WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.400.802Seat Removal
0.300.301Seat Power Adjust-
ment System Deacti-
vation (a)
0.200.201FIGURE 1
0.601.202Seat Installation
0.500.501Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.400.802Seat Removal
0.300.301Seat Power Adjust-
ment System Deacti-
vation (a)
0.200.201FIGURE 2
0.601.202Seat Installation
0.500.501Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
29 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 30

Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
Group 1, Configuration 2, 4:
WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DE-
TAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Num-
ber and Amendment
of the Horizontal Ac-
tuator
0.200.201FIGURE 1
0.400.802Seat Removal
0.300.301Seat Power Adjust-
ment System Deacti-
vation (a)
0.601.202Seat Installation
0.500.501Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Num-
ber and Amendment
of the Horizontal Ac-
tuator
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
30 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 31

Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.200.201FIGURE 2
0.400.802Seat Removal
0.300.301Seat Power Adjust-
ment System Deacti-
vation (a)
0.601.202Seat Installation
0.500.501Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
Group 1, Configuration 1, 3:
WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
(a)Do PART 7
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Refer to the applicable supplier service bulletin.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
Group 1, Configuration 1-2:
WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORI-
ZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
(a)Do PART 8
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
31 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 32

Group 1, Configuration 1-2:
WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORI-
ZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
(a) Refer to the applicable supplier service bulletin.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
Group 1, Configuration 2, 4:
WORK PACKAGE 7 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Num-
ber and Amendment
of the Horizontal Ac-
tuator
0.200.201FIGURE 1
0.10.11Identify Seat (c)
0.400.802Seat Removal (a)
0.601.202Seat Installation (a)
0.500.501Operational Test (a)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 2.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
(c) Applicable if Condition 3 is found.
Group 1, Configuration 3-4:
WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUA-
TOR IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Num-
ber and Amendment
of the Horizontal Ac-
tuator
0.200.201FIGURE 2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
32 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 33

Group 1, Configuration 3-4:
WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUA-
TOR IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.10.11Identify Seat (c)
0.400.802Seat Removal (a)
0.601.202Seat Installation (a)
0.500.501Operational Test (a)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 2.
(b) A total is not given as task usage is variable. Add the values of the applicable
tasks together to get the total.
(c) Applicable if Condition 3 is found.
The time to do the work in accordance with the applicable Ipeco service bulletin(s) is not included in
the manpower estimate.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 85901-136S
b. Boeing Service Related Problem (SRP) 747-SRP-25-0306
c. Service Bulletin Index D6-30300
d. 747 Fleet Team Digest (FTD) 25-12003
e. 747 Master Minimum Equipment List (MMEL) 25-11-01-01
f. 747-100/200/300 Aircraft Maintenance Manual (AMM) 25-11-01
g. 747-400 Aircraft Maintenance Manual (AMM) 25-11-00, 25-11-01
h. 747-8 Aircraft Maintenance Manual (AMM) 25-11-00, 25-11-01
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
33 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 34

i. Ipeco Component Maintenance Manual CMM 25-11-38
j. Ipeco Service Bulletin 097-25-03, 097-25-04, 107-25-04, 107-25-05, 112-25-03, 112-25-04,
209-25-03, 209-25-04, 211-25-05, 211-25-06, 212-25-05, 212-25-06, 258-25-13, 258-25-14
NOTE: The supplier was advised to send copies of the service bulletin to each operator.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-11747-100/200/300 Illustrated Parts Catalog
11-11, 25-11747-400 Illustrated Parts Catalog
11-50, 25-11747-8 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
34 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 35

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. Refer to Ipeco SB 097-25-04, Ipeco SB 107-25-05, Ipeco SB 112-25-04, Ipeco SB 209-25-04,
Ipeco SB 211-25-06, Ipeco SB 212-25-06 or Ipeco SB 258-25-14.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
Group 1, Configuration 2-4:
NotesExisting Ipeco Part Num-
ber
NameQTYIpeco Part Num-
ber / Specification
(a)(b)(c)(d)3A258-0041-01-1SEAT ASSEMBLY - CAPTAIN13A258-0041-01-2
(a)(b)(c)(d)3A258-0042-01-1SEAT ASSEMBLY - FIRST OFFI-
CER
13A258-0042-01-2
(a) Refer to Ipeco SB 258-25-14.
(b) This part is used in production.
(c) A new seat assembly is an alternative to the accomplishment of the applicable Ipeco service bulletin.
(d) This part number of new seat assembly has horizontal actuator, Artus part number AD8650503 (Ipeco
part number 2A258-0487), at 'Amendment C' or later, installed.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
35 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 36

NotesNew Ipeco Part
Number
NameQTYExisting Ipeco
Part Number
(a)(i)-SEAT ASSEMBLY -
CAPTAIN
13A090-0027-01-1
(b)(i)-SEAT ASSEMBLY -
CAPTAIN
3A090-0055-01-1
(c)(i)-SEAT ASSEMBLY -
CAPTAIN
3A090-0065-01-1
(d)(i)-SEAT ASSEMBLY -
CAPTAIN
3A090-0075-01-1
(e)(i)-SEAT ASSEMBLY -
CAPTAIN
3A090-0079-01-1
(f)(i)-SEAT ASSEMBLY -
CAPTAIN
3A090-0081-01-1
(g)(h)(i)(j)3A258-0041-01-1ZSEAT ASSEMBLY -
CAPTAIN
3A258-0041-01-1
(a)(i)-SEAT ASSEMBLY -
FIRST OFFICER
13A090-0028-01-1
(b)(i)-SEAT ASSEMBLY -
FIRST OFFICER
3A090-0056-01-1
(c)(i)-SEAT ASSEMBLY -
FIRST OFFICER
3A090-0066-01-1
(d)(i)-SEAT ASSEMBLY -
FIRST OFFICER
3A090-0076-01-1
(e)(i)-SEAT ASSEMBLY -
FIRST OFFICER
3A090-0080-01-1
(f)(i)-SEAT ASSEMBLY -
FIRST OFFICER
3A090-0082-01-1
(g)(h)(i)(j)3A258-0042-01-1ZSEAT ASSEMBLY -
FIRST OFFICER
3A258-0042-01-1
(a) Make the change in accordance with Ipeco SB 097-25-04.
(b) Make the change in accordance with Ipeco SB 107-25-05.
(c) Make the change in accordance with Ipeco SB 112-25-04.
(d) Make the change in accordance with Ipeco SB 209-25-04.
(e) Make the change in accordance with Ipeco SB 211-25-06.
(f) Make the change in accordance with Ipeco SB 212-25-06.
(g) Make the change in accordance with Ipeco SB 258-25-14.
(h) This part is not used in production.
(i) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
36 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 37

NotesNew Ipeco Part
Number
NameQTYExisting Ipeco
Part Number
(j) The Captain's and First Officer's seat is only changed into the new part number if the hori-
zontal actuator AD8650503 at amendment C or later, or part 2A258-0487 has been installed.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
Refer to Ipeco SB 097-25-04, Ipeco SB 107-25-05, Ipeco SB 112-25-04, Ipeco SB 209-25-04, Ipeco
SB 211-25-06, Ipeco SB 212-25-06 or Ipeco SB 258-25-14.
E. Special Tooling - Price and Availability
Refer to Ipeco SB 097-25-04, Ipeco SB 107-25-05, Ipeco SB 112-25-04, Ipeco SB 209-25-04, Ipeco
SB 211-25-06, Ipeco SB 212-25-06 or Ipeco SB 258-25-14.
F. Special Tooling Necessary to do this Service Bulletin
Refer to Ipeco SB 097-25-04, Ipeco SB 107-25-05, Ipeco SB 112-25-04, Ipeco SB 209-25-04, Ipeco
SB 211-25-06, Ipeco SB 212-25-06 or Ipeco SB 258-25-14.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
37 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 38

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
38 of 76
BOEING SERVICE BULLETIN 747-25-3653
BLANK PAGE

### Page 39

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Each work package can be
completed independently during separate maintenance visits. Task Hours and Elapsed
Hours for each package are given in Paragraph 1.G., Manpower.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747-200/300/400/400F/8/8F
Structural Repair Manual, Chapter 51.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Refer to APPENDIX A, APPENDIX B, APPENDIX C, APPENDIX D, APPENDIX E,
APPENDIX F, APPENDIX G and APPENDIX H for logic diagram(s). Logic diagrams
are provided as an aid only. Information contained in Paragraph 1.E., Compliance
is the primary source for compliance times. Information in Paragraph 3.B., Work
Instructions is the primary source for tasks required for compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
39 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 40

8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
11. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
12. The CONDITIONS, ACTIONS and OPTIONS shown apply to the Captain's and First
Officer's seats independently.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
14. For part number series 3A258 seats, horizontal actuator part number AD8650503
identified in the Paragraph 3.B., Work Instructions is the Artus identity. This actuator
also has an Ipeco identity, which is part number 2A258-0487.
15. A serviceable Captain's seat in this service bulletin is defined as one with part number
3A258-0041-01-2 or 3A258-0041-01-1Z, or as one with part number 3A258-0041-01-1
that has a horizontal actuator with Artus part number AD8650503 at 'Amendment C'
or later. Installation of a serviceable Captain's seat is a terminating action to the
repeat inspections in this service bulletin.
16. A serviceable First Officer's seat in this service bulletin is defined as one with part
number 3A258-0042-01-2 or 3A258-0042-01-1Z, or as one with part number
3A258-0042-01-1 that has a horizontal actuator with Artus part number AD8650503
at 'Amendment C' or later. Installation of a serviceable First Officer's seat is a
terminating action to the repeat inspections in this service bulletin.
17. Foreign Object Debris (FOD) in this service bulletin is defined as coins, tools, nuts,
bolts, a pen, or any object that can potentially impede seat movement.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
40 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 41

B. WORK INSTRUCTIONS
Group 1, Configuration 1, 3:
WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
a. CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 1 (ACTION 2): Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400
AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
(3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 5.
Refer to Paragraph 1.E., Compliance.
b. CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
(1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat that has done PART 1. Refer to 747-100/200/300 AMM 25-11-01, 747-400
AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
(c) Deactivate the power adjustment system of the seat in accordance with 747 Master
Minimum Equipment List (MMEL) 25-11-01-01.
(2) OPTION 1 (ACTION 2): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT
SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 5. Refer
to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
41 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 42

(4) OPTION 2 (ACTION 1): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT
SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package 5. Refer
to Paragraph 1.E., Compliance.
c. RC Exempt - Do the electrical operational check of the seat. Refer to 747-100/200/300 AMM
25-11-01 as an accepted procedure. Or, do the Flight Compartment Seats Operational Test.
Refer to 747-400 AMM 25-11-00 or 747-8 AMM 25-11-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
a. CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 1 (ACTION 2): Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400
AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
(3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 6.
Refer to Paragraph 1.E., Compliance.
b. CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
(1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2
(b) Install seat that has done PART 2. Refer to 747-100/200/300 AMM 25-11-01, 747-400
AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
42 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 43

(c) Deactivate the power adjustment system of the seat in accordance with 747 Master
Minimum Equipment List (MMEL) 25-11-01-01.
(2) OPTION 1 (ACTION 2): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 6. Refer
to Paragraph 1.E., Compliance.
(4) OPTION 2 (ACTION 1): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package 6. Refer
to Paragraph 1.E., Compliance.
c. RC Exempt - Do the electrical operational check of the seat. Refer to 747-100/200/300 AMM
25-11-01 as an accepted procedure. Or, do the Flight Compartment Seats Operational Test.
Refer to 747-400 AMM 25-11-00 or 747-8 AMM 25-11-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 2, 4:
WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
43 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 44

b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) Do PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
(a) CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 1.
2) CONDITION 1 (ACTION 2): Install seat. Refer to 747-100/200/300 AMM
25-11-01, 747-400 AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted
procedure.
3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work
Package 7. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat that has done PART 1. Refer to 747-100/200/300 AMM 25-11-01,
747-400 AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
747 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM
25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or
done PART 3.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
7. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
44 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 45

b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM
25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or
done PART 3.
5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
7. Refer to Paragraph 1.E., Compliance.
6) OPTION 3: Install a serviceable seat:
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install a serviceable seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400
AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph
3.A., General Information, is a terminating action to the repeat
inspections for the Captain's seat in accordance with this service
bulletin.
(c) RC Exempt - Do the electrical operational check of the seat. Refer to 747-100/200/300
AMM 25-11-01 as an accepted procedure. Or, do the Flight Compartment Seats
Operational Test. Refer to 747-400 AMM 25-11-00 or 747-8 AMM 25-11-00 as an
accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 3 (ACTION 2): No further action required.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
45 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 46

(a) CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 2.
2) CONDITION 1 (ACTION 2): Install seat. Refer to 747-100/200/300 AMM
25-11-01, 747-400 AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted
procedure.
3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work
Package 8. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat that has done PART 2. Refer to 747-100/200/300 AMM 25-11-01,
747-400 AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
747 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM
25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or
done PART 4.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
8. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM
25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or
done PART 4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
46 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 47

5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
8. Refer to Paragraph 1.E., Compliance.
6) OPTION 3: Install a serviceable seat:
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install a serviceable seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400
AMM 25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable First Officer's seat as defined in
Paragraph 3.A., General Information, is a terminating action to the
repeat inspections for the First Officer's seat in accordance with
this service bulletin.
(c) RC Exempt - Do the electrical operational check of the seat. Refer to 747-100/200/300
AMM 25-11-01 as an accepted procedure. Or, do the Flight Compartment Seats
Operational Test. Refer to 747-400 AMM 25-11-00 or 747-8 AMM 25-11-00 as an
accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1, 3:
WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 7 - CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
a. Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b. Continue to do the repeat actions in accordance with Work Package 5. Refer to Paragraph
1.E., Compliance.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1-2:
WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 8 - FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
a. Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b. Continue to do the repeat actions in accordance with Work Package 6. Refer to Paragraph
1.E., Compliance.
3. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
47 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 48

Group 1, Configuration 2, 4:
WORK PACKAGE 7 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 3 (ACTION 2): No further action required.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 7 - CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON
AIRPLANE CHECKS AND CORRECTIVE ACTION
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Do the repeat actions in accordance with Work Package 7. Refer to Paragraph 1.E.,
Compliance.
(2) OPTION 2: Install a serviceable seat:
(a) Remove seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(c) Install a serviceable seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM
25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the Captain's seat in accordance with this service bulletin.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 747-100/200/300
AMM 25-11-01 as an accepted procedure. Or, do the Flight Compartment Seats
Operational Test. Refer to 747-400 AMM 25-11-00 or 747-8 AMM 25-11-00 as an
accepted procedure.
3. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
48 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 49

Group 1, Configuration 3-4:
WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 3 (ACTION 2): No further action required.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 8 - FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM
ON AIRPLANE CHECKS AND CORRECTIVE ACTION
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Do the repeat actions in accordance with Work Package 8. Refer to Paragraph 1.E.,
Compliance.
(2) OPTION 2: Install a serviceable seat:
(a) Remove seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(c) Install a serviceable seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM
25-11-01 or 747-8 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the First Officer's seat in accordance with this service bulletin.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 747-100/200/300
AMM 25-11-01 as an accepted procedure. Or, do the Flight Compartment Seats
Operational Test. Refer to 747-400 AMM 25-11-00 or 747-8 AMM 25-11-00 as an
accepted procedure.
3. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
49 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 50

PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 097-25-04(a)S232T303-3333A090-0027-01-1
Ipeco SB 107-25-05(a)S232T303-3533A090-0055-01-1
Ipeco SB 112-25-04(a)S232T303-3633A090-0065-01-1
Ipeco SB 209-25-04(a)S232T303-4333A090-0075-01-1
Ipeco SB 211-25-06(a)S232T303-4533A090-0079-01-1
Ipeco SB 212-25-06(a)S232T303-4633A090-0081-01-1
Ipeco SB 258-25-14(a)S232T311-1033A258-0041-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or
747-8 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 097-25-04(a)S232T303-3343A090-0028-01-1
Ipeco SB 107-25-05(a)S232T303-3543A090-0056-01-1
Ipeco SB 112-25-04(a)S232T303-3643A090-0066-01-1
Ipeco SB 209-25-04(a)S232T303-4343A090-0076-01-1
Ipeco SB 211-25-06(a)S232T303-4543A090-0080-01-1
Ipeco SB 212-25-06(a)S232T303-4643A090-0082-01-1
Ipeco SB 258-25-14(a)S232T311-1043A258-0042-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
50 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 51

PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
1. Remove seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or 747-8 AMM
25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 097-25-04(a)S232T303-3333A090-0027-01-1
Ipeco SB 107-25-05(a)S232T303-3533A090-0055-01-1
Ipeco SB 112-25-04(a)S232T303-3633A090-0065-01-1
Ipeco SB 209-25-04(a)S232T303-4333A090-0075-01-1
Ipeco SB 211-25-06(a)S232T303-4533A090-0079-01-1
Ipeco SB 212-25-06(a)S232T303-4633A090-0081-01-1
Ipeco SB 258-25-14(a)S232T311-1033A258-0041-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 4: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE
OVERHAUL
1. Remove seat. Refer to 747-100/200/300 AMM 25-11-01, 747-400 AMM 25-11-01 or 747-8 AMM
25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 097-25-04(a)S232T303-3343A090-0028-01-1
Ipeco SB 107-25-05(a)S232T303-3543A090-0056-01-1
Ipeco SB 112-25-04(a)S232T303-3643A090-0066-01-1
Ipeco SB 209-25-04(a)S232T303-4343A090-0076-01-1
Ipeco SB 211-25-06(a)S232T303-4543A090-0080-01-1
Ipeco SB 212-25-06(a)S232T303-4643A090-0082-01-1
Ipeco SB 258-25-14(a)S232T311-1043A258-0042-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
Group 1, Configuration 2, 4:
PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
1. Find the Artus part number and amendment of the horizontal actuator that is installed on the seat.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
51 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 52

a. Captain's seat part numbers 3A258-0041-01-2 and 3A258-0041-01-1Z have a horizontal
actuator with Artus part number AD8650503 at 'Amendment C' or later. For Captain's seats
with other part numbers, maintenance records can be used if the part number and Amendment
of the horizontal actuator can be identified. If maintenance records are not available or the
part number and Amendment cannot be identified from maintenance records, inspect to find
the part number and Amendment of the horizontal actuator installed on the seat. Refer to
APPENDIX I.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat
in accordance with this service bulletin.
Group 1, Configuration 3-4:
PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
1. Find the Artus part number and amendment of the horizontal actuator that is installed on the seat.
a. First Officer's seat part numbers 3A258-0042-01-2 and 3A258-0042-01-1Z have a horizontal
actuator with Artus part number AD8650503 at 'Amendment C' or later. For Captain's seats
with other part numbers, maintenance records can be used if the part number and Amendment
of the horizontal actuator can be identified. If maintenance records are not available or the
part number and Amendment cannot be identified from maintenance records, inspect to find
the part number and Amendment of the horizontal actuator installed on the seat. Refer to
APPENDIX I.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the First Officer's
seat in accordance with this service bulletin.
PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS AND
CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 097-25-03(a)S232T303-3333A090-0027-01-1
Ipeco SB 107-25-04(a)S232T303-3533A090-0055-01-1
Ipeco SB 112-25-03(a)S232T303-3633A090-0065-01-1
Ipeco SB 209-25-03(a)S232T303-4333A090-0075-01-1
Ipeco SB 211-25-05(a)S232T303-4533A090-0079-01-1
Ipeco SB 212-25-05(a)S232T303-4633A090-0081-01-1
Ipeco SB 258-25-13(a)S232T311-1033A258-0041-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
52 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 53

PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS
AND CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 097-25-03(a)S232T303-3343A090-0028-01-1
Ipeco SB 107-25-04(a)S232T303-3543A090-0056-01-1
Ipeco SB 112-25-03(a)S232T303-3643A090-0066-01-1
Ipeco SB 209-25-03(a)S232T303-4343A090-0076-01-1
Ipeco SB 211-25-05(a)S232T303-4543A090-0080-01-1
Ipeco SB 212-25-05(a)S232T303-4643A090-0082-01-1
Ipeco SB 258-25-13(a)S232T311-1043A258-0042-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1: October 19, 2018
53 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-25-3653
CAPTAIN'S SEAT  (TYPICAL)  2548861
(LEFT SIDE VIEW)
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 1 OF 2)
Original Issue: August 04, 2017
Revision 1 October 19, 2018  Export Controlled ECCN: 9E991 - BOEING  747-25-3653
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  54 of 76

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD.
--FODRemove1
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1 October 19, 2018
55 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 56 (OCR)

BOEING SERVICE BULLETIN 747-25-3653
FIRST OFFICER'S SEAT  (TYPICAL)  2548863
(LEFT SIDE VIEW)
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 1 OF 2)
Original Issue: August 04, 2017
Revision 1 October 19, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-25-3653
Work - See page 1 for details.  56 of 76

### Page 57

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD.
--FODRemove1
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1 October 19, 2018
57 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 58

This Appendix applies only to: Group 1, Configuration 1, 3.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED IN-
SPECTION
PART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE
OVERHAUL
PART 3
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
CONDITION 2
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 04, 2017
747-25-3653Revision 1 October 19, 2018
58 of 76
BOEING SERVICE BULLETIN 747-25-3653

### Page 59 (OCR)

BOEING SERVICE BULLETIN 747-25-3653
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 5
2552565
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 2 OF 3)
Original Issue: August 04, 2017
Revision 1 October 19, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-25-3653
Work - See page 1 for details.  59 of 76

### Page 60 (OCR)

BOEING SERVICE BULLETIN 747-25-3653
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  INSTALL SEAT  OPTION 2 (ACTION 1):
DO PART 3
WITHOUT POWER
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 1  DO THE REPEAT ACTIONS
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 5
OPTION 1 (ACTION 2):
DO PART 3
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 5
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 3 OF 3)
Original Issue: August 04, 2017
Revision 1 October 19, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-25-3653
Work - See page 1 for details.  60 of 76

The text continues at https://openairdocs.org/service-documents/boeing/sb-747-25-3653/file/f3cdd926fefd.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
