# Boeing Special Attention Service Bulletin 747-25-3692: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0276; AD 2018-16-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 747-25-3692](https://openairdocs.org/service-documents/boeing/sb-747-25-3692.md)
- Title as filed: SB-747-25-3692-00--
- Pages: 38
- PDF: https://openairdocs.org/files/sha256/12/ab/12ab10ebbe0194df9f5ec1294bd4aa6bda49868985cb3ef50f28f63e36d4baf5
- Page: https://openairdocs.org/service-documents/boeing/sb-747-25-3692/file/12ab10ebbe01

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Number: 747-25-3692
Original Issue: June 22, 2016
ATA System: 2515 2520
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Dripshields Below Flight
Compartment Floor - BMS 8-39 Foam Strip Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: June 22, 2016
747-25-3692
1 of 38
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
2 of 38
BOEING SERVICE BULLETIN 747-25-3692
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 16
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 19
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 20
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
FIGURE 1: MAIN DECK CEILING - DRIPSHIELD REMOVAL . . . . . . . . . . . . . . . . . . . . . . 23
FIGURE 2: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP REMOVAL . . . . . . . . . . . . . 26
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION . . . . . . . . . . . 29
FIGURE 4: MAIN DECK CEILING - DRIPSHIELD INSTALLATION . . . . . . . . . . . . . . . . . . . 35
APPENDIX A: APPLICATION OF PRESSURE SENSITIVE TAPE (BAC 5801) . . . . . . . . . . . . . . 38
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
3 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
4 of 38
BOEING SERVICE BULLETIN 747-25-3692
BLANK PAGE

### Page 5

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 747-25-3692Original Issue: June 22, 2016
ATA System: 2515 2520
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Dripshields Below Flight
Compartment Floor - BMS 8-39 Foam Strip Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will make sure that the risk of fire below the flight compartment floor from
aging BMS 8-39 urethane foam is decreased. Degraded foam strips made from BMS 8-39 urethane foam on
the dripshields below the flight compartment floor can be an unacceptable fuel source for a fire if exposed to an
ignition source. If this service bulletin is not done, it could result in an increased risk of fire below the flight
compartment floor.
BMS 8-39 urethane foam has self-extinguishing and physical properties that degrade with age, more specifically
in moist or humid conditions. Large parts fabricated from this material present an unacceptable fuel source.
BMS 8-39 urethane foam fire retardants are mixed into, but are not chemically connected with the remaining
components of the foam. This condition will cause the fire retardant properties to have decreased effectiveness.
The concern is hidden areas where fire cannot easily be detected and suppressed.
The dripshields located below the flight deck floor have foam strips made from BMS 8-39 urethane foam. The
dripshields are above the passenger compartment ceiling panels and the area is not easily accessible during
flight.
This service bulletin gives instructions to remove the foam strips made from BMS 8-39 urethane foam and
replace them with foam strips made from BMS 8-371 on the dripshields below the flight compartment floor. BMS
8-371 foam has improved fire retardant properties that stay effective with age.
Boeing Service Related Problem (SRP) 747-SRP-25-0364 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 25-16001 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
5 of 38

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.E., ComplianceYesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 85901-154RS)
Remove the main deck ceiling liners. Remove the four dripshields. Replace the BMS 8-39 foam strips on the
dripshields with BMS 8-371 foam strips. Install the changed dripshields. Install the main deck ceiling liners.
EFFECTIVITY
747-100/100B/100B SUD/ 200B/300, 747SP and 747SR Airplanes. Refer to Paragraph 1.A.1., Airplanes, for
the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 60 months after the Original
Issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operators Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
6 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 7 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
STA
260
STA
240
REPLACE BMS 8-39 FOAM STRIPS
WITH BMS 8-371 FOAM STRIPS.
LBL  BL  RBL
10.0  0.00  10.00
MAIN DECK CEILING DRIPSHIELDS
(VIEW LOOKING UP)
2478859
Original Issue: June 22, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  747-25-3692  7 of 38

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
8 of 38
BOEING SERVICE BULLETIN 747-25-3692
BLANK PAGE

### Page 9

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Number: 747-25-3692
Original Issue: June 22, 2016
ATA System: 2515 2520
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Dripshields Below Flight
Compartment Floor - BMS 8-39 Foam Strip Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 747-100/100B/100B SUD/ 200B/300, 747SP and 747SR
Airplanes, line numbers 57 - 810, in 1 Group. The Variable Numbers and Group Information for
the applicable airplanes is given below. Refer to PRR 85901-154RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
747-100/100B/100B SUD/ 200B/300, 747SP and 747SR Airplanes
delivered with dripshields below the flight compartment floor that
have BMS 8-39 foam strips.
-1
Airplane Models:
747-100, 747-100B, 747-100B SUD, 747-200B, 747-300, 747SP, 747SR
GroupVariable Number
1RA026 - RA034
1RA113 - RA115
1RA162 - RA164
1RA216 - RA217
1RA245 - RA246
1RA255 - RA266
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
9 of 38

### Page 10

GroupVariable Number
1RA304 - RA318
1RA359 - RA360
1RA369 - RA373
1RA406 - RA418
1RA501 - RA502
1RA524 - RA528
1RA532 - RA548
1RA559 - RA561
1RA582
1RA585
1RA633 - RA635
1RA651 - RA652
1RA671 - RA677
1RA701 - RA702
1RA721 - RA731
1RA741 - RA745
1RA749 - RA750
1RA761 - RA762
1RA781 - RA784
1RA902
1RA908 - RA916
1RB001 - RB016
1RB044
1RB071 - RB075
1RB101 - RB102
1RB411 - RB413
1RB421
1RB601 - RB607
1RB681 - RB697
1RB711
1RB721 - RB723
1RB741 - RB748
1RD001 - RD004
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
10 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 11

GroupVariable Number
1RD021 - RD022
1RD041 - RD059
1RD071 - RD072
1RD081 - RD083
1RD091 - RD092
1RD101 - RD104
1RD121 - RD127
1RD131 - RD144
1RD166 - RD167
1RD171 - RD172
1RD181 - RD183
1RD201 - RD204
1RD221 - RD227
1RD231 - RD235
1RD241 - RD243
1RD251 - RD262
1RD271 - RD272
1RD291 - RD292
1RD301 - RD302
1RD311
1RD351 - RD358
1RD361 - RD366
1RD381 - RD383
1RD411 - RD414
1RD421 - RD426
1RD431 - RD435
1RD441 - RD442
1RD451 - RD456
1RD461
1RD471 - RD475
1RD513 - RD519
1RD531 - RD533
1RD551
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
11 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 12

GroupVariable Number
1RD561
1RD571
1RD581 - RD583
1RD591 - RD593
1RD601 - RD607
1RD621 - RD623
1RD641 - RD649
1RD651 - RD659
1RD661
1RD671
1RD681 - RD682
1RD691 - RD692
1RD701 - RD702
1RD721 - RD722
1RD741 - RD742
1RD751 - RD755
1RD761
1RD771 - RD775
1RD781 - RD783
1RD791 - RD792
1RE001
1RG001 - RG009
1RG091
1RG095
1RG101 - RG104
1RG121 - RG126
1RG141 - RG142
1RG161 - RG164
1RG171 - RG174
1RG191 - RG193
1RG211 - RG213
1RG221 - RG222
1RH101 - RH102
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
12 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 13

GroupVariable Number
1RH111 - RH112
1RH121 - RH122
1RS001 - RS002
1RS201
1RS211 - RS212
1RS221 - RS222
1RS231 - RS241
1RS251 - RS259
1RS263
1RS265 - RS268
1RS271 - RS276
1RS291 - RS292
1RS301 - RS306
1RS311 - RS320
1RS331 - RS333
1RS341 - RS342
1RS699
1RS701 - RS703
1RS711 - RS713
1RS721 - RS722
1RS731 - RS732
1RS741 - RS743
1RS751 - RS752
1RS761 - RS762
1RS771
1RS781 - RS782
1RS786
2. Spares Affected
None.
B. Concurrent Requirements
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
13 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 14

C. Reason
Accomplishment of this service bulletin will make sure that the risk of fire below the flight compartment
floor from aging BMS 8-39 urethane foam is decreased. Degraded foam strips made from BMS 8-39
urethane foam on the dripshields below the flight compartment floor can be an unacceptable fuel source
for a fire if exposed to an ignition source. If this service bulletin is not done, it could result in an increased
risk of fire below the flight compartment floor.
BMS 8-39 urethane foam has self-extinguishing and physical properties that degrade with age, more
specifically in moist or humid conditions. Large parts fabricated from this material present an
unacceptable fuel source. BMS 8-39 urethane foam fire retardants are mixed into, but are not chemically
connected with the remaining components of the foam. This condition will cause the fire retardant
properties to have decreased effectiveness. The concern is hidden areas where fire cannot easily be
detected and suppressed.
The dripshields located below the flight deck floor have foam strips made from BMS 8-39 urethane
foam. The dripshields are above the passenger compartment ceiling panels and the area is not easily
accessible during flight.
This service bulletin gives instructions to remove the foam strips made from BMS 8-39 urethane foam
and replace them with foam strips made from BMS 8-371 on the dripshields below the flight compartment
floor. BMS 8-371 foam has improved fire retardant properties that stay effective with age.
Boeing Service Related Problem (SRP) 747-SRP-25-0364 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 25-16001 is related to this service bulletin.
D. Description
Remove the main deck ceiling liners. Remove the four dripshields. Replace the BMS 8-39 foam strips
on the dripshields with BMS 8-371 foam strips. Install the changed dripshields. Install the main deck
ceiling liners.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212747-100, 747-100B, 747-100B
SUD, 747-200B, 747-300,
747SP, 747SR
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 60 months after the
Original Issue date of this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
14 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 15

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
1.601.601FIGURE 1
0.700.701FIGURE 2
3.003.001FIGURE 3
1.601.601FIGURE 4
0.500.501Close Access
7.907.90TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
15 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 16

J. References
1. Existing Data:
a. Engineering Change Memo PRR 85901-154RS
b. Boeing Service Related Problem (SRP) 747-SRP-25-0364
c. Service Bulletin Index D6-30300
d. Standard Overhaul Practices Manual (SOPM) 20-30-03, 20-50-10
e. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19
f. 747 Fleet Team Digest (FTD) 25-16001
g. 747-100/200/300 Aircraft Maintenance Manual (AMM) 25-22-01
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
DRIPSHIELD INSTL - STA 240 - STA 26065B54092
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-15747-100/200/300 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
16 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 17

M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
17 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 18

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
18 of 38
BOEING SERVICE BULLETIN 747-25-3692
BLANK PAGE

### Page 19

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane if needed. As an alternative, operators can purchase the parts from Boeing Spares. This
service bulletin does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesNameQTYPart Number /
Specification
(a)BLOCK FOAM200 Inches
(1.5 inch
thick and 1
inch width)
BMS 8-371, Type
1A, Class 1, Grade
2
TIE STRAP4BACS38K1
(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS) for
supplier data.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c)-Dripshield Assy165B54090-5
(a) (b) (c)-Dripshield Assy165B54090-14
(a) (b) (c)-Dripshield Assy165B54091-5
(a) (b) (c)-Dripshield Assy165B54091-13
(a) Make the change in accordance with this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
19 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 20

NotesNew Part NumberNameQTYExisting Part
Number
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
(c) You cannot use the existing part to replace the new or changed part.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
20 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 21

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
5. The necessary conditions for selection of clamp type and size are included in SWPM
20-10-12. If any wire bundle support clamp specified in this service bulletin does not
make a correct fit on the wire bundle, refer to SWPM 20-10-12 as an accepted
procedure to select a clamp that fits correctly.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
21 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 22

7. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
10. Where the work instruction include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
11. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
12. 'Foam Strips' in Paragraph 3.B., Work Instructions are referred to as 'Block Foam'
in the related Figures.
B. WORK INSTRUCTIONS
1. Remove main deck ceiling liners to get access to the dripshields below the flight compartment
floor, between STA 240 and STA 260. Refer to 747-100/200/300 AMM 25-22-01 as an accepted
procedure.
2. Remove the dripshields in accordance with FIGURE 1.
3. Remove the BMS 8-39 foam strips from the dripshields in accordance with FIGURE 2.
4. RC - Install the replacement BMS 8-371 foam strips on the dripshields in accordance with FIGURE
3.
5. Install the changed dripshields in accordance with FIGURE 4.
6. Install main deck ceiling liners between STA 240 and STA 260. Refer to 747-100/200/300 AMM
25-22-01 as an accepted procedure.
7. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
22 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 23 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
STA
260
STA
240
8 LOCATIONS
LBL  BL  RBL
10.0  0.00  10.0
4 LOCATIONS
MAIN DECK CEILING DRIPSHIELDS
(VIEW LOOKING UP)
FIGURE 1: MAIN DECK CEILING - DRIPSHIELD REMOVAL
(SHEET 1 OF 3)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  747-25-3692
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  23 of 38

### Page 24 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
DRIPSHIELDS
3 LOCATONS
FWD
DRIPSHIELDS  DRIPSHIELDS
TYPICAL  TYPICAL
(3 LOCATIONS)  (2 LOCATIONS)
C  2483511
FIGURE 1: MAIN DECK CEILING - DRIPSHIELD REMOVAL
(SHEET 2 OF 3)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-25-3692
Work - See page 1 for details.  24 of 38

### Page 25

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
4BACS38K1TIE STRAPRemove1
From the drip-
shields.
465B54092-3DRAIN TUBEDisconnect
8NAS603-12PSCREWRemove / Keep2
8NAS1149C0332RWASHERRemove / Keep
3NAS1464-024-06CCLIP PLATERemove / Keep3
165B54090-5DRIPSHIELD ASSYRemove / Keep4
3BACN10JC3CNUTRemove / Keep5
6NAS1149C0332RWASHERRemove / Keep
3NAS603-12PSCREWRemove / Keep
165B54090-14DRIPSHIELD ASSYRemove / Keep6
4NAS1149C0332RWASHERRemove / Keep7
2NAS603-12PSCREWRemove / Keep
2BACN10JC3CNUTRemove / Keep
165B54091-5DRIPSHIELD ASSYRemove / Keep8
165B54091-13DRIPSHIELD ASSYRemove / Keep9
FIGURE 1: MAIN DECK CEILING - DRIPSHIELD REMOVAL
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
25 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 26 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
•
9988217
FIGURE 2: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP REMOVAL
(SHEET 1 OF 3)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-25-3692
Work - See page 1 for details.  26 of 38

### Page 27 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
2478870
FIGURE 2: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP REMOVAL
(SHEET 2 OF 3)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  747-25-3692
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  27 of 38

### Page 28

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
165B54090-13BLOCK FOAMRemove1
165B54090-7BLOCK FOAMRemove2
165B54090-11BLOCK FOAMRemove3
265B54091-10BLOCK FOAMRemove4
165B54091-12BLOCK FOAMRemove5
165B54091-11BLOCK FOAMRemove6
265B54091-8BLOCK FOAMRemove7
165B54090-10BLOCK FOAMRemove8
165B54091-9BLOCK FOAMRemove9
165B54090-8BLOCK FOAMRemove10
165B54090-9BLOCK FOAMRemove11
165B54091-7BLOCK FOAMRemove12
165B54091-14BLOCK FOAMRemove13
165B54090-15BLOCK FOAMRemove14
FIGURE 2: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP REMOVAL
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
28 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 29 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
O  B
0.50
3.00
0.50
D
0.80
- 0.25
C
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION
(SHEET 1 OF 6)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  747-25-3692
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  29 of 38

### Page 30 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
A-A
B-B
0.50
0.50
D-D  0.25→  2483747
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION
(SHEET 2 OF 6)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-25-3692
Work - See page 1 for details.  30 of 38

### Page 31 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
(15)
2478892
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION
(SHEET 3 OF 6)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  747-25-3692
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  31 of 38

### Page 32

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)4-DRIPSHIELD ASSYClean1
Cut into three 6 inch
lengths. (b)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut2
On the 65B54090-
14, 65B54091-5 and
65B54091-13 drip-
shield assys. (c)
3BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 24 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut3
On the 65B54091-13
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 26 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut4
On the 65B54090-14
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut into three 3 inch
lengths. (b)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut5
On the 65B54090-14
and 65B54091-13
dripshield assys. (c)
3BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 1.5 inch. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut6
On the 65B54090-14
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 2.5 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut7
On the 65B54091-13
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
(b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut8
On the 65B54090-14
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 3.5 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut9
On the 65B54090-14
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION
(SHEET 4 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
32 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 33

More DataQtyIdentificationNameTaskStep
Cut to 6 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut10
On the 65B54090-14
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
(b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut11
On the 65B54091-13
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 7 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut12
On the 65B54091-13
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 2.5 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut13
On the 65B54091-5
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 10 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut14
On the 65B54091-5
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 10 inches. (b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut15
On the 65B54090-5
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
Cut to 4 inches.(b)1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMCut16
On the 65B54091-13
dripshield assy. (c)
1BMS 8-371, TYPE 1A,
CLASS 1, GRADE 2
BLOCK FOAMInstall (New)
To identify that the
65B54090-5 drip-
shield assy is
changed. Refer to
SOPM 20-50-10 as
an accepted proce-
dure.
1747-25-3692 R00SERVICE BULLETIN
NUMBER
Apply17
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION
(SHEET 5 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
33 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 34

More DataQtyIdentificationNameTaskStep
To identify that the
65B54090-14 drip-
shield assy is
changed . Refer to
SOPM 20-50-10 as
an accepted proce-
dure.
1747-25-3692 R00SERVICE BULLETIN
NUMBER
Apply18
To identify that the
65B54091-5 drip-
shield assy is
changed. Refer to
SOPM 20-50-10 as
an accepted proce-
dure.
1747-25-3692 R00SERVICE BULLETIN
NUMBER
Apply19
To identify that the
65B54091-13 drip-
shield assy is
changed. Refer to
SOPM 20-50-10 as
an accepted proce-
dure.
1747-25-3692 R00SERVICE BULLETIN
NUMBER
Apply20
(a) Clean the surfaces where the BMS 8-371 foam strips are to be installed to make sure grease, dirt or re-
maining adhesive is removed. Refer to SOPM 20-30-03 as an accepted procedure.
(b) It is recommended that the BMS 8-371 foam is cut to the lengths ('strips') specified as a minimum dimen-
sion, or that the BMS 8-371 foam is put on the dripshields and measured before it is cut.
(c) Remove the protective backing from the adhesive side of the BMS 8-371 foam strip(s) and install on the
dripshield(s). Refer to APPENDIX A as an accepted procedure. During installation of the BMS 8-371 foam
strip(s), cut and trim to length, to agree with the size and shape of the dripshield(s).
FIGURE 3: MAIN DECK CEILING - DRIPSHIELD - FOAM STRIP INSTALLATION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
34 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 35 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
STA
260
STA
240
8 LOCATIONS
(9)  LBL  10.0  0.00  BL  RBL  10.0
4 LOCATIONS
MAIN DECK CEILING DRIPSHIELDS
(VIEW LOOKING UP)
2479786
FIGURE 4: MAIN DECK CEILING - DRIPSHIELD INSTALLATION
(SHEET 1 OF 3)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  747-25-3692
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  35 of 38

### Page 36 (OCR)

BOEING SERVICE BULLETIN 747-25-3692
DRIPSHIELDS
3 LOCATONS
FWD
DRIPSHIELDS  DRIPSHIELDS
TYPICAL  TYPICAL
(3 LOCATIONS)  (2 LOCATIONS)
2484150
FIGURE 4: MAIN DECK CEILING - DRIPSHIELD INSTALLATION
(SHEET 2 OF 3)
Original Issue: June 22, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-25-3692
Work - See page 1 for details.  36 of 38

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)165B54091-13DRIPSHIELD ASSYInstall (Changed)1
(a)165B54091-5DRIPSHIELD ASSYInstall (Changed)2
4NAS1149C0332RWASHERInstall (Kept)3
2NAS603-12PSCREWInstall (Kept)
2BACN10JC3CNUTInstall (Kept)
(a)165B54090-14DRIPSHIELD ASSYInstall (Changed)4
6NAS1149C0332RWASHERInstall (Kept)5
3NAS603-12PSCREWInstall (Kept)
3BACN10JC3CNUTInstall (Kept)
(a)165B54090-5DRIPSHIELD ASSYInstall (Changed)6
3NAS1464-024-06CCLIP PLATEInstall (Kept)7
8NAS1149C0332RWASHERInstall (Kept)8
8NAS603-12PSCREWInstall (Kept)
Back on the drip-
shields.
465B54092-3DRAIN TUBEConnect9
4BACS38K1TIE STRAPInstall (New)
(a) Make sure the dripshield assembly does not touch adjacent structure after installation. It is acceptable to
trim the top of the BMS 8-371 foam strips to a minimum remaining thickness of 0.75 inches.
FIGURE 4: MAIN DECK CEILING - DRIPSHIELD INSTALLATION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
37 of 38
BOEING SERVICE BULLETIN 747-25-3692

### Page 38

NOTE: THE PROCESS INFORMATION THAT IS SUPPLIED WITH THIS SERVICE BULLETIN IS IN
SHORTENED FORM AND WAS UP-TO-DATE WHEN THIS SERVICE BULLETIN WAS PREPARED.
THIS PROCESS INFORMATION SUPPLIED WILL NOT BE KEPT UP-TO-DATE. FOR MORE
INFORMATION REFER TO APPLICABLE BAC PROCESS AND MATERIALS SPECIFICATIONS:
APPLICATION OF PRESSURE SENSITIVE TAPE (BAC 5801).
SURFACE PREPARATION
1. Clean surfaces to which tape is to be applied. Refer to SOPM 20-30-03 as an accepted procedure.
Use of Citra-Safe is not permitted. Do not soil this cleaned surface prior to applying tape.
2. Do not allow these solvents to contact plastics, control cables, lubricated areas, plastic decals, or paints
or markings that are non-Skydrol-resistant.
OTHER TAPE TO MISCELLANEOUS SURFACES
1. Apply the tape to the area specified.
2. Position the tape and carefully press into place. Adhere the tape securely by exerting pressure with
the fingers or a roller or a polyethylene sweep.
3. Exercise care in putting the tape down so that the adhesive surface does not come in contact with
objects or areas other than those for which it is intended.
APPENDIX A:  APPLICATION OF PRESSURE SENSITIVE TAPE (BAC 5801)
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2016
747-25-3692
38 of 38
BOEING SERVICE BULLETIN 747-25-3692

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
