# Boeing Information Service Bulletin 747-28-2275: Revision 4

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0090; AD 2011-06-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Information Service Bulletin 747-28-2275](https://openairdocs.org/service-documents/boeing/sb-747-28-2275.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 156
- PDF: https://openairdocs.org/files/sha256/b7/6b/b76b28025f856570fba111326bc5e106141da3bbdcef84c0a755d54802b7a8e1
- Page: https://openairdocs.org/service-documents/boeing/sb-747-28-2275/file/b76b28025f85

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Commercial
ABDEING  Group  Airplane  747
Service Bulletin
Number:  747-28-2275
Date:  June 12, 2006
Revision 4:  February 02, 2009
ATA System: 2811
SUBJECT:  CONVERSION AIRPLANE - Converted Freighter Modification of a 747-400 Passenger
Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer Fuel Tank
Deactivation
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2006 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third
parties. Treatment of the document and the information it contains is governed by contract with Boeing. For
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10,
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document
or otherwise.
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  1 of 156

### Page 2 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
BLANK PAGE
BLANK PAGE
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  2 of 156

### Page 3 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Table of Contents
Revision Transmittal Sheet.  5
Summary
1.  PLANNING INFORMATION.  11
A.  Effectivity. w  11
1. Airplanes  11
2. Spares Affected . . .  12
B.  Concurrent Requirements  12
C.  Reason  13
D. Description  13
E.  Compliance  14
F.  Approval  14
G.  Manpower  14
H. Weight and Balance Changes  14
Electrical Load Data  14
References.  15
1. Existing Data  15
2. Data supplied with this Service Bulletin:  17
3.  Installation Drawings Used in the Preparation of this Service Bulletin:  20
4.  Process Data: .  20
K. Publications Affected. .  21
L  Interchangeability and Intermixability of Parts  21
2.  MATERIAL INFORMATION.  23
A.  Material - Price and Availability.  23
B.  Industry Support Information..  23
C.  Parts Necessary For Each Airplane  23
1.  Kits/Parts:  23
2. Parts and Materials Supplied by the Operator:  25
3. Parts Modified and Reidentified:  25
4. Parts Removed and Not Replaced:  26
D.  Parts Necessary to Change Spares  29
Special Tooling - Price and Availability  29
F.  Special Tooling Necessary to do this Service Bulletin  29
3.  ACCOMPLISHMENT INSTRUCTIONS.  31
A. GENERAL INFORMATION . . .  31
B. WORK INSTRUCTIONS. . ...  31
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE  51
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION  53
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION  55
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION  57
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE  59
FIGURE 6: HORIZONTAL STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE  61
FIGURE 7: REMOTE ELECTRONIC UNIT CHANGES - E8 EQUIPMENT RACK  64
FIGURE 8: FUEL SYSTEM CARD FILE CHANGE  66
FIGURE 9: FUEL MANAGEMENT CONTROL PANEL CHANGE  67
FIGURE 10: FUEL MANAGEMENT CONTROL PANEL CHANGE  68
Table of Contents
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  3 of 156

### Page 4 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
FIGURE 11: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE
CHANGE  . 69
FIGURE 12: REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE.  . 79
FIGURE 13: REWORK OF WIRE BUNDLES  87
FIGURE 14: REWORK OF WIRE BUNDLES  • • 90
FIGURE 15: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE
CHANGE  93
FIGURE 16: FUEL MANAGEMENT CONTROL PANEL CHANGE  103
FIGURE 17: REWORK OF WIRE BUNDLES  104
FIGURE 18: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE
CHANGE  107
FIGURE 19: FUEL MANAGEMENT CONTROL PANEL CHANGE  117
FIGURE 20: REWORK OF WIRE BUNDLES  118
FIGURE 21: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE
CHANGE  121
FIGURE 22: FUEL MANAGEMENT CONTROL PANEL CHANGE  131
FIGURE 23: REWORK OF WIRE BUNDLES .  132
FIGURE 24: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE
CHANGE.  135
FIGURE 25: FUEL MANAGEMENT CONTROL PANEL CHANGE  145
FIGURE 26: REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE.  146
FIGURE 27: REWORK OF WIRE BUNDLES . . :  154
Table of Contents
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  4 of 156

### Page 5 (OCR)

Commercial
BOEING  Airplanes  747
Service Bulletin
Number:  747-28-2275  Revision Transmittal Sheet
Original Issue:  June 12, 2006
Revision 4:  February 02, 200g
ATA System: 2811
SUBJECT:  crane sa 4748 pecial rested 5r plane totion a de set fant
Deactivation
This Revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed as shown in the original release of this service bulletin.
Airplane RT526 was added to this service bulletin effectivity and will be included as Group 6 airplane.
REASON FOR REVISION
This Revision adds airplane RT526 (Group 6) to the service bulletin effectivity.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
Original Issue:  June 12, 2006
Revision 1:  March 16, 2007
Revision 2:  July 2, 2007
Revision 3:  March 11, 2008
Revision 4:  February 02, 2009
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  5 of 156

### Page 6 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
BLANK PAGE
Original issue: June 12, 2006
Revision 4: February 02, 2005  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  6 of 156

### Page 7 (OCR)

Q BOEING:  Airplane  Commercial  Group  747
Service Bulletin
Number:  747-28-2275  Summary
Date:  June 12, 2006
Revision 4:  February 02, 2009
ATA System: 2811
SUBJECT:  CONVERSION AIRPLANE - Converted Freighter Modification of a 747-400 Passenger
Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer Fuel Tank
Deactivation
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
As part of the special freighter conversion, the tail fuel tank is to be deactivated and the fuel transfer line
removed. This service bulletin provides instructions and a kit of parts to do that.
I ACTION (MC 0100MK4042, MC 0100MK4053, MC 0100MK4106)
On P7-2 overhead circuit breaker panel, remove the Horizontal Stabilizer REFUEL & XFR circuit breakers
C10125 and C10126. Rework the circuit breaker wiring.
On the horizontal stabilizer refuel valve control unit, disconnect electrical connector, cap and stow wiring.
At the FWD and AFT fuel isolation valves for the horizontal stabilizer transfer system, disconnect the electrical
connector from each valve actuator, coil and stow wiring. Position manual override lever for affected valves,
located on valve actuator, to closed position and lock wire to secure in place.
On the P42 left wing refueling panel coil and stow wiring for indicator, switches and lights. Place "H.STAB TANK
DEACTIVATED" placard above H.STAB indicator.
On P85 panel, remove HOR STAB XFER/JETT PUMP circuit breakers C03141 and C03142. Remove HOR
STAB XFER/JETT PUMP placard below the circuit breakers. Rework circuit breaker wire and pump wiring. Cap
and stow plugs S1884 and S1885 for H.STAB fuel pump low pressure switches.
On the horizontal stabilizer transfer / jettison pumps, remove two motor impeller assemblies located on the front
spar of H. Stab tank. Install plugs and associated pins.
On the E8 equipment rack, in the Remote Electronic Unit (REU), M7861, remove REU cover plate and H.STAB
Individual Fuel Quantity Channel (IFQC) card. Re-install REU cover plate. Placard REU "INOP" and rework the
wiring.
On the Fuel System Card File, remove horizontal stabilizer transfer Single Point Sensor Control (SPS) card
and install cover assembly. Coil and stow SPSC card wiring. Insert jumper wire in Fuel System Card File.
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  7 of 156

### Page 8 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
On P5 overhead panel, remove the Fuel Management Control Module (M00154) and rework the wiring.
On the Fuel Quantity Indicating System (FQIS), reprogram FQIS card file for Horizontal Stabilizer absent.
On the Wire Integration (WIU), modify affected wire bundles.
On the fuel transfer line, remove and discard fuel transfer line from center wing tank to the horizontal stabilizer
fuel tank, and install plugs.
On the E2 equipment rack, make changes to the left, center, and right Electronic Instrument Unit (EIU)
configuration pins to disable the Horizontal Stab Tank display and associated messaging on the Integrated
Display Unit (IDS).
EFFECTIVITY
Group  Operator  Airplanes
SIA  RT510
2  SIA  RT513
SIA  RT516
4  SIA  RT524
5  SIA  RT519
6  SIA  RT526
COMPLIANCE
No compliance time is given.
INDUSTRY SUPPORT INFORMATION
Boeing Industry Support information is provided in Master Change 0100MK4042, 0100MK4053, and
| 0100MK4106.
MANPOWER
Man Hours are not listed in this Service Bulletin, they are negotiated separately between Boeing and the
contracted modification facility.
MATERIAL INFORMATION
Negotiated Kits.
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  8 of 156

### Page 9 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
POSITION MANUAL OVERRIDE
LEVER FOR AFT ISOLATION
VALVES TO CLOSE POSITION
AND DISCONNECT
POSITION MANUAL OVERRIDE LEVER  ELECTRICAL CONNECTOR
FOR FWD ISOLATION VALVES TO  FROM VALVE ACTUATOR
CLOSE POSITION AND DISCONNECT
ELECTRICAL CONNECTOR FROM
VALVE ACTUATOR
REMOVE 2 MOTOR
REMOVE SPS CARD FROM  IMPELLER UNITS.
FUEL SYSTEM CARD FILE  INSTALL PLUGS
AND INSTALL COVER ASSY
IN AFT EQUIPMENT RACK E8
REMOVE IFQC CARD IN REU.
PLACARD REU INOP. REMOVE
REMOVE FUEL  2 CIRUIT BREAKERS ON P85
MGMT PANEL  PANEL
IN THE P5
REMOVE HORIZONTAL
FNDC  STABILIZER FUEL
TRANSFER LINE AND
REMOVE REFUEL AND  PLACARD "H. STAB TANK  INSTALL PLUGS
XFR STAB L AND  DEACTIVATED' ON LEFT
STAB R CIRCUIT  WING REFUELING P42 PANEL
BREAKERS ON P7
PANEL  REMOVE RELAYS AND CHANGE THE
WIRING AT THE P7. P414 FUEL
SYSTEM CARD FILE, F2-6 SHELF AND
THE P54 PANEL. REVISE PIN
PROGRAMMING TO THE LEFT. CENTER
AND RIGHT EIU ON SHELF 6 OF E2-6.
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  9 of 156

### Page 10 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
BLANK PAGE
June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  10 of 156

### Page 11 (OCR)

Commercial
A BOEING  Airplanes  747
Service Bulletin
Number:  747-28-2275
Original Issue: June 12, 2006
Revision 4:  February 02, 2009
ATA System: 2811
SUBJECT:  CONVERSION AIRPLANE - Converted Freighter Modification of a 747-400 Passenger
Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer Fuel Tank
Deactivation
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-30300 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. Refer to Master Change 0100MK4042,
0100MK4053, and 0100MK4106 for data about this change.
GROUP CONFIGURATION  DESCRIPTION
747-400 airplane RT510 to be modified to a
747-400SF.
2  747-400 airplane RT513 to be modified to a
747-400SF.
747-400 airplane RT516 to be modified to a
747-400SF.
4  747-400 airplane RT524 to be modified to a
747-400SF.
747-400 airplane RT519 to be modified to a
747-400SF.
6  747-400 airplane RT526 to be modified to a
747-400SF.
Airplane models:
747-400
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright @ Unpublished Work - See page 1 for details.  11 of 156

### Page 12 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
DRAGONAIR (DRG)
RT510
2  RT513
RT516
4  RT524
5  RT519
SINGAPORE AIRLINES (SIA)
RT526
IDENTIFICATION BY VARIABLE NUMBER
Variable  Group
RT510  1
RT513  2
RT516  3
RT519  5
RT524  4
RT526  6
2. Spares Affected
None.
B. Concurrent Requirements
This service bulletin is to be accomplished concurrently with the 747-400 Boeing Converted Freighter
Modification.
Group 1-6:
Service
Company  Bulletin  Description
Boeing  747-00-0024  This service bulletin is the collector of all lower level service bulletins for Group 1
Boeing Converted Freighter.
Boeing  747-00-2026  This service bulletin is the collector of all lower level service bulletins for Group 2
Boeing Converted Freighter.
Boeing  747-00-2048  This service bulletin is the collector of all lower level service bulletins for Group 3
Boeing Converted Freighter.
Boeing  747-00-2049  This service bulletin is the collector of all lower level service bulletins for Group 4
Boeing Converted Freighter.
Boeing  747-00-2051  This service bulletin is the collector of all lower level service bulletins for Group 5
Boeing Converted Freighter.
Boeing  747-00-2039  This service bulletin is the collector of all lower level service bulletins for Group 6
Boeing Converted Freighter.
Boeing  747-28-2182  Fuel Quantity Processor and Remote Electronics Unit Change for Group 6
airplane only.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details.  12 of 156

### Page 13 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
C. Reason
As part of the special freighter conversion, the tail fuel tank is to be deactivated and the fuel transfer
line removed. This service bulletin provides instructions and a kit of parts to do that.
Revision 1 is adding RT516 airplane to this service bulletin effectivity and will be included as Group 3
airplane.
Revision 2 is adding RT524 airplane to this service bulletin effectivity and will be included as Group 4
airplane.
Revision 3 is adding RT519 airplane to this service bulletin effectivity and will be included as Group 5
airplane.
Revision 4 adds airplane RT526 to this service bulletin effectivity and will be included as Group 6
airplane.
D. Description
On P7-2 overhead circuit breaker panel, remove the Horizontal Stabilizer REFUEL & XFR circuit
breakers C10125 and C10126. Rework the circuit breaker wiring.
On the horizontal stabilizer refuel valve control unit, disconnect electrical connector, cap and stow
wiring.
At the FWD and AFT fuel isolation valves for the horizontal stabilizer transfer system, disconnect the
electrical connector from each valve actuator, coil and stow wiring. Position manual override lever for
affected valves, located on valve actuator, to closed position and lock wire to secure in place.
On the P42 left wing refueling panel coil and stow wiring for indicator, switches and lights. Place
"H.STAB TANK DEACTIVATED" placard above H.STAB indicator.
On P85 panel, remove HOR STAB XFER/JETT PUMP circuit breakers C03141 and C03142. Remove
HOR STAB XFER/JETT PUMP placard below the circuit breakers. Rework circuit breaker wire and
pump wiring. Cap and stow plugs S1884 and S1885 for H.STAB fuel pump low pressure switches.
On the horizontal stabilizer transfer / jettison pumps, remove two motor impeller assemblies located
on the front spar of H. Stab tank. Install plugs and associated pins.
On the E8 equipment rack, in the Remote Electronic Unit (REU), M7861, remove REU cover plate and
H.STAB Individual Fuel Quantity Channel (IFQC) card. Re-install REU cover plate. Placard REU
"INOP" and rework the wiring.
On the Fuel System Card File, remove horizontal stabilizer transfer Single Point Sensor Control
(SPSC) card and install cover assembly. Coil and stow SPSC card wiring. Insert jumper wire in Fuel
System Card File.
On P5 overhead panel, remove the Fuel Management Control Module (M00154) and rework the
wiring.
On the Fuel Quantity Indicating System (FQIS), reprogram FQIS card file for Horizontal Stabilizer
absent.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  13 of 156

### Page 14 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
On the Wire Interface Unit (WIU), modify affected wire bundles at WIU.
On the fuel transfer line, remove and discard fuel transfer line from center wing tank to the horizontal
stabilizer fuel tank, and install plugs.
On the E2 equipment rack, make changes to the left, center, and right Electronic Instrument Unit (EIU)
configuration pins to disable the Horizontal Stab Tank display and associated messaging on the
Integrated Display Unit (IDS).
Revision 1 - No more work is necessary on airplanes changed as shown in the original release of this
service bulletin.
Revision 2 - No more work is necessary on airplanes changed as shown in the revision 1 of this
service bulletin.
Revision 3 - No more work is necessary on airplanes changed as shown in the revision 2 of this
service bulletin.
Revision 4 - No more work is necessary on airplanes changed as shown in revision 3 of this service
bulletin.
E. Compliance
No compliance time is given.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this service bulletin comply with the applicable Federal Aviation Regulations and are FAA
approved. This service bulletin and its approval were based on the airplane in its original Boeing
delivery configuration or as modified by other FAA Boeing changes
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency
approval before incorporating this service bulletin
G. Manpower
Man Hours are not listed in this Service Bulletin they are negotiated separately between Boeing and
the contracted modification facility.
H. Weight and Balance Changes
Boeing requires that, because of the magnitude and uniqueness of major modification programs, the
total airplane weight and center of gravity will be determined by actual weighing after all modifications
are complete and prior to delivery. The actual data will be recorded and placed in Chapter 2 of the
Weight and Balance Manual.
Electrical Load Data
Group 1: Refer to Document Number D828B004-1001 for Electrical Load Data.
Group 2: Refer to Document Number D828B004-1002 for Electrical Load Data.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details:  14 of 156

### Page 15 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 3: Refer to Document Number D828B004-1003 for Electrical Load Data.
Group 4: Refer to Document Number D828B004-1004 for Electrical Load Data.
Group 5: Refer to Document Number D828B004-1005 for Electrical Load Data.
Group 6: Refer to Document Number D828B008-1001 for Electrical Load Data.
NOTE: The electrical loads of SIA Model 747-400BCF airplanes RT510, RT513, RT516, RT524,
RT519, and RT526 as specified in document D281U002-422 have been reviewed and the
following loads were deleted.
1.  Direct Current (DC) Loads
Airplanes  Nomenclature  Connected  Circuit  Bus
Load  Breaker
RT510,  Refuel and Transfer  1.40  10125  DC1P7
RT513,  Stabilizer - Left
RT516,
RT524,  Refuel and Transfer  1.40  10126  DC2P7
RT519,  Stabilizer - Right
RT526
2.  Alternating Current (AC) Loads
Airplanes  Nomenclature  Connected  Circuit  Bus
Load  Breaker
RT510,  Horizontal Stabilizer  4.600KVA  3141  GSB-3
RT513,  Boost Pump - Fwd  .76PF
RT516,
RT524,
RT519,  Horizontal Stabilizer  4.600KVA  3142  AC2P85P1
RT526  Boost Pump - Aft  .76PF  83
J. References
1. Existing Data:
a. Engineering Change Memo MC 0100MK4042, 0100MK4053, and 0100MK4106.
b. 747-400 Aircraft Maintenance Manual (AMM): 12-11-10, 20-11-06, 20-11-16, 24-22-00,
28-11-00, 28-17-01, 28-17-04, 28-17-06, 28-17-10, 28-21-12, 28-22-00, 28-26-00,
28-41-00, 28-41-17, 29-11-00, 32-00-30.
C.  747-400 Wiring Diagram Manual (WDM): 24-51-26, 24-51-64, 24-54-23, 28-21-11,
28-21-12, 28-21-13, 28-21-21, 28-21-23, 28-21-24, 28-21-25, 28-21-26, 28-21-27,
28-21-28, 28-21-29, 28-21-30, 28-21-31, 28-42-15, 28-43-12, 28-54-13, 31-61-12,
31-61-22, 31-61-32.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  15 of 156

### Page 16 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
d. 747-400SF Structural Repair Manual (SRM) 51.
e. Boeing Parts Standards Document D-590.
f.  Group 1: Electrical Load Data Document D828B004-1001
g-  Group 2: Electrical Load Data Document D828B004-1002
h.  Group 3: Electrical Load Data Document D828B004-1003
I.  Group 4: Electrical Load Data Document D828B004-1004
J-  Group 5: Electrical Load Data Document D828B004-1005
K.  Group 6: Electrical Load Data Document D828B008-1001
I. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-20-00
m. Boeing Service Bulletins: Refer to Paragraph 1.B., for Concurrent Requirements.
n. Refer to Paragraph 1.E., Compliance.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  16 of 156

### Page 17 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
2. Data supplied with this Service Bulletin:
NOTE:
The Module Parts List (MPL) drawings listed below will not be shipped with this
service bulletin. Drawing access will be given to the modification site through My
Boeing Fleet (MBF). This was negotiated by the operator and modification facility
under Master Change 0100MK4042, 0100MK4053, and 0100MK4106.
2.  Within the MPL is a list of the retrofit and/or production drawing picture sheets
required to facilitate installation of the identified part, assembly or installation as
given in this service bulletin.
a. Drawings: The following lists of RMC's are a collection of all MPL's as shown on the tables: .
Group 1: RMC 800B0108-1
MPL  TITLE  DRAWING SHEET REV.
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL  834B0401  MPL  E
STABILIZER  28401255  C
284U1255  DL
284U4219  7
344U1011  4
344U1011  DL
34401014  1  B
344U1014  DL  B
344U1022  1  K
34401022  2
344U1022  DL  A
344U1023  2
344U1023  IDL
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  17 of 156

### Page 18 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 2: RMC 800B0117-1
MPL  TITLE  DRAWING  SHEET REV.
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL  834B0401  MPL
STABILIZER  148U0002  1  A
148U0002  DL
284U1255  1
284U1255  IDL
284U4219  7
344U1011  4
344U1011  IDL
344U1014  1
344U1014  IDL  B
344U1022  1
344U1022
344U1022  IDL
344U1023
344U1023  DL
Group 3: RMC 800B0126-1
MPL  TITLE  DRAWING  SHEET  REV.
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL  834B0401  MPL  E
STABILIZER  14800002  1  A
148U0002  IDL
284U1255  1  C
284U1255  DL
284U4219  7
344U1011  4
344U1011  IDL
344U1014  1  B
344U1014  DL  B
344U1022  1  K
344U1022  G
344U1022  DL
344U1023  A
344U1023  DL
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  18 of 156

### Page 19 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 4: RMC 800B0135-1
MPL  TITLE  DRAWING  SHEET REV.
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL  834B0401  MPL
STABILIZER  148U0002  1  A
148U0002  DL
284U1255  1  C
284U1255  DL
284U4219  7
344U1011  4
344U1011  DL
344U1014  1  B
344U1014  DL  B
344U1022  1  K
344U1022  2
344U1022  IDL
344U1023  A
344U1023  IDL
Group 5: RMC 800B0755-1
• MPL  TITLE  DRAWING  SHEET REV.
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL STABILIZER  834B0401  MPL  F
148U0002  1
148U0002  DL
284U1255  1
284U1255  DL
284U4219  7
344U1011  4
344U1011  DL
344U1014  B
344U1014  DL  B
344U1022  1  K
344U1022  2  G
344U1022  DL
344U1023  2  A
344U1023  DL
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  19 of 156

### Page 20 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 6: RMC 800B0755-3
MPL  TITLE  DRAWING  SHEET REV.
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL STABILIZER  834B0401  MPL  F
148U0002  1  A
148U0002  DL
284U1255  1  C
284U1255  DL
284U4219  7
344U1011  4
344U1011  IDL
344U1014  1
344U1014  DL  B
344U1022  1  K
344U1022  2  G
344U1022  DL  A
344U1023  2  JA
344U1023  IDL
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
4. Process Data:
Boeing Process specifications referred to on the drawings are not given in this service bulletin
since these procedures are frequently used as standard shop practices.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  20 of 156

### Page 21 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
K. Publications Affected
Publication  Chapter-Section
747 FAA Approved Airplane Flight Manual  1
747 Operations Manual  L. 10, 6.20, 12.10, 12.20, 12.30, NNC. 12,
and NP.21
747 Maintenance Manual  11-13, 28-10, 28-30, and 28-40 (Dual
configuration already exists)
747 Wiring Diagram Manual
747 Fault Reporting Manual
747 Fault Isolation Manual
747 Illustrated Parts Catalog
24-51, 24-54, 28-21, 28-22, 28-27, 28-41,
28-42, 28-43, 28-51, and 31-61
28-10
28 CMCS Index, 28 EICAS Index
28-22, 28-26, and 28-41
Ramp Maintenance Manual  28-00
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability
information.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  21 of 156

### Page 22 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
BLANK PAGE
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  22 of 156

### Page 23 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing supplies the kits shown in Paragraph 2. C., Parts Necessary For Each Airplane. This was
negotiated with the operator under Master Change 0100MK4042, 0100MK4053, and 0100MK4106.
B. Industry Support Information
Boeing Industry Support Information is provided in Master Change 0100MK4042, 0100MK4053, and
0100MK4106.
C. Parts Necessary For Each Airplane
Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  23 of 156

### Page 24 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
NOTE:  One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
Kit 834B0401
New Part  Existing Part
Number  QTY  Name  Number  Notes
834B0401-1001  -  FUEL TANK DEACTIVATION -  (a)
HORIZONTAL STABILIZER
285U0096-6  1  COVER ASSY
835B0004-1  1  PLUG - CONNECTOR FITTING, HST
FUEL TRANSFER LINE
835U0001-1  2  MACHINED PARTS DETAILS-PLUG
835U0002-1  MACHINED PARTS DETAILS-PIN
AS5168W32  2  PLUG, FLARED TUBE  (b)
BAC27EFS595  1  MARKER
BAC27TFDE0013  VINYL DECAL- (INOP)
MS21913W32  1  PLUG, FLARELESS  (b)
65B02637-22  1  BLANKING PLATE
65B02637-28  1  GASKET
Notes:
(a) Kit has more parts than necessary. Discard extra parts or keep them for other use.
(b) Optional to AS5168W32 in the forward fitting 344U0014 only.
Group 1-4:
Kit 826B4260
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-14  1  Wire
Group 5:
Kit 826B4970-8
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-37  1  Wire
Group 5:
Kit 826B4980-8
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-37  1  Wire
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright @ Unpublished Work - See page 1 for details.  24 of 156

### Page 25 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 5:
Kit 826B4990-7
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-4  1  Wire
Group 6:
Kit 826B4970-8
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-37  1  Wire
Group 6:
Kit 826B4980-7
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-37  1  Wire
Group 6:
Kit 826B4990-7
New Part  Existing Part
Number  QTY  Name  Number  Notes
829B9006-4  1  Wire
2. Parts and Materials Supplied by the Operator:
Part Number /
Specification  QTY  Name  Notes
2645  4  Plug Button  (a)
Notes:
(a) PALL AEROPOWER CORP
5775 RIO VISTA
CLEARWATER FL 33760
727-539-8448
3. Parts Modified and Reidentified:
None
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  25 of 156

### Page 26 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
4. Parts Removed and Not Replaced:
Group 1-5:
Existing Part Number  Name  QTY  Notes
60-72101-1 or 60-  Motor Impeller Assembly  2  Refer to 747-400 AMM
72102-4 (Boeing Part  28-17-04 (a)
Number 60B92603-22
or 60B92603-26)
S344T002-8  Horizontal Stabilizer Transfer Single  1  Refer to 747-400 AMM
Point Sensor Control Card (SPSC) A3  28-17-10 (a)
60B92018-207  Individual Fuel Quantity Channel (IFQC)  1  Refer to 747-400 AMM
Card Y5XA1  28-41-17 (a)
R7391  Relay  Located on P54 panel
10-60536-25 (opt 10-  Hose Assy
60536-22)
344U0000-6  Tube Assy
344U1022-10  Tube Assy
344U1022-11  Tube Assy
344U1022-12  Tube Assy
344U1022-13  Tube Assy
344U1022-14  Tube Assy
344U1022-2  Tube Assy
344U1022-22  Sleeve
344U1022-23  Shroud
344U1022-25  Tube Assy
344U1022-26  Tube Assy
344U1022-5  Tube Assy
344U1022-8  Tube Assy
344U1022-9  Tube Assy
6305B374S48-03  Nut Assy
344U1018-8 (opt  Tube Assy
344U0018-5)
6305B381S48-1  Shroud Connector  1
63211-48  Coupling Assy  1
69B92447-39  Spacer  1  (b)
69B92447-52  Spacer  1  (b)
69B92447-8  Spacer  1  (b)
AN735D48  Clamp, Loop  20
AS1712D48  Coupling  11
BACB30NM3HK7  Bolt  6
BACC10CC48  Clamp, U-style  3
BACC10CC48S  Clamp  1  (b)
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  26 of 156

### Page 27 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 1-5:
Existing Part Number  Name  QTY  Notes
BACC10EW48A  Clamp, U-style  60
BACC10EW48B  Clamp, U-style  60
BACJ40A20-3  Bonding Jumper  2
BACJ40A20-4  Bonding Jumper  4
BACJ40A20-5  Bonding Jumper  9
BACS40R008E048F  Shim, Laminated  1
MS24665-144  Pin  4
MS29513-234  O-ring  2
MS29513-241  O-ring  1
MS29513-338  O-ring  26
NAS1523AA3R  O-ring  6
344U0000-2  Fitting  1
MS29513-241  O-ring  1
AP7102D32-1 (opt  Union  1
AFP720D3232 or
AP7102D32 or
MS21900D32)
MS29512-32  O-ring  1
10-60536-23  Hose Assy  1
Notes:
(a) Refer to 747-400 AMM 28-17-04.
(b) Quantity used varies.
Group 6:
Existing Part Number  Name  QTY Notes
60-72101-1 or 60-  Motor Impeller Assembly  2  Refer to 747-400 AMM
72102-4 (Boeing Part  28-17-04 (a)
Number 60B92603-22
or 60B92603-26)
S344T002-8  Horizontal Stabilizer Transfer Single  1  Refer to 747-400 AMM
Point Sensor Control Card (SPSC) A3  28-17-10 (a)
60B92018-207  Individual Fuel Quantity Channel (IFQC)  1  Refer to 747-400 AMM
Card Y5XA1  28-41-17 (a)
R7391  Relay  Located on P54 pane
10-60536-25 (opt 10-  Hose Assy
60536-22)
344U0000-6  Fitting
344U1022-10  Tube Assy  1
344U1022-11  Tube Assy
344U1022-12  Tube Assy  1
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  27 of 156

### Page 28 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 6:
Existing Part Number  Name  QTY Notes
344U1022-13  Tube Assy  1
344U1022-14  Tube Assy
344U1022-2  Tube Assy  1
344U1022-22  Sleeve  2
344U1022-23  Shroud
344U1022-25  Tube Assy
344U1022-26  Tube Assy  1
344U1022-5  Tube Assy  3
344U1022-8  Tube Assy  1
344U1022-9  Tube Assy  1
6305B374S48-03  Nut Assy  2
6305B381S48-1  Shroud Connector  1
63211-48  Coupling Assy
69B92447-39  Spacer  A/R  (b)
69B92447-52  Spacer  A/R  (b)
69B92447-8  Spacer  A/R  (b)
AN735D48  Clamp, Loop  20
AS1712D48  Coupling  11
BACB30NM3HK7  Bolt
BACC10CC48  Clamp, U-style
BACC10CC48S  Clamp  (b)
BACC10EW48A  Clamp, U-style
BACC10EW48B  Clamp, U-style
BACJ40A20-3  Bonding Jumper
BACJ40A20-4  Bonding Jumper
BACJ40A20-5  Bonding Jumper
BACS40R008E048F  Shim, Laminated
MS24665-144  Pin  4
M25988-1-234  O-ring
M25988-1-241  O-ring
M25988-1-338  O-ring  26
NAS1523AA3R  O-ring  6
344U0000-2  Fitting  1
AP7102D32  Union  1
MS29512-32  O-ring
34400018-12  Tube assy  1
10-60536-23  Hose Assy  1
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  28 of 156

### Page 29 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 6:
Existing Part Number Name  QTY Notes
Notes:
(a) Refer to 747-400 AMM 28-17-04.
(b) Quantity used varies.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
The operator can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this
Service Bulletin. Tool price and supply data are not given.
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be
necessary. Examine operator tool supply to make sure all necessary tools are available.
Tool Kit Number  Name
Shop Supply  ESDS Wrist Strap (1 required)
Shop Supply  Jumper Wire (4 required)
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  29 of 156

### Page 30 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
BLANK PAGE
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  30 of 156

### Page 31 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
Linear dimensions are in inches
Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
Angular tolerance is plus or minus 2 degrees
Hole dimensions for standard solid rivets are given in 747-400SF Structural Repair
Manual, Chapter 51, 747-400SF SRM 51.
Torque limits to tighten nuts and bolts are given in 747-400SF Structural Repair
Manual, Chapter 51, 747-400SF SRM 51.
4. For approved fastener and process material substitutions, refer to 747-400SF Structural
Repair Manual, Chapter 51,747-400SF SRM 51.
5. Refer to the Boeing Standard Wiring Practices Manuals 20-10-11 and 20-10-12 for the
wire installation procedures. SWPM 20-10-11, SWPM 20-10-12.
6. If the length of fasteners specified in this service bulletin do not meet the installation
standards, fasteners of the same specification, or an approved substitute, one grip length
longer or shorter may be used.
7. Refer to the Boeing Standard Wiring Practices Manuals for the necessary grounding
procedures, SWPM 20-20-00. This is the same as BAC5117 which is used on the
drawings.
B. WORK INSTRUCTIONS
Horizontal Stabilizer Tank Preparation
1. Defuel Horizontal Stabilizer Tank (HST) per 747-400 AMM 28-26-00. In addition, defuel Main
Tanks 2 and 3 sufficiently to allow the Fill/Jettison Manifold to drain.
2. Sump HST per 747-400 AMM 12-11-10.
Open the following circuit breakers and attach DO-NOT-CLOSE tag on the P7 Overhead Circuit
Breaker Panel:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details.  31 of 156

### Page 32 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
a. 7H25 REFUEL & XFR STAB L.
b. 7H26 REFUEL & XFR STAB R.
Manually open one of the horizontal stabilizer isolation valves at the rear spar of the center wing
tank. Refer to 747-400 AMM 28-17-01
NOTE: This will let fuel from the fuel transfer line drain into main tanks 2 and 3.
5. On the flight deck push FUEL synoptic EICAS display switch.
6. On the lower EICAS display, record the fuel quantity for all displayed tanks.
7. After the fuel has drained from the fuel transfer line, manually close the horizontal stabilizer
isolation valve that was opened.
8. Close the circuit breakers opened in step 3 above.
9. Purge the fuel tanks as specified in 747-400 AMM 28-11-00. Prepare the horizontal stabilizer for
entry.
10. Clean and corrosion protect HST as necessary to prepare for deactivation in accordance with
747-400 AMM 28-11-00.
11. Close HST (do not put fuel into the HST).
12. Put the stabilizer in the neutral trim position (3 units of trim) as follows:
a. Supply electrical power. Refer to the 747-400 AMM 24-22-00.
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL
CONTROL SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER.
AILERONS, RUDDERS, ELEVATORS, FLAPS, SPOILERS, LANDING GEAR,
AND THRUST REVERSERS CAN MOVE QUICKLY WHEN YOU SUPPLY
HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE
TO EQUIPMENT.
b. Supply hydraulic power. Refer to the 747-400 AMM 29-11-00.
c. Use the STAB TRIM ALTN switches to set the horizontal stabilizer to the neutral rig position
(3 units of trim).
d. Set the STAB TRIM 2 and 3 switches on the control stand to CUTOUT.
On the P7 panel, open the L STAB TRIM S/O VLV circuit breaker (position E7) and the R
STAB TRIM S/O VLV circuit breaker (position E20) and attach DO-NOT-CLOSE tabs.
Set all FLT CONTROL HYD POWER TAIL switches on the P461 pilots overhead
maintenance panel to SHUTOFF.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  32 of 156

### Page 33 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
g. On the P180 panel, open these circuit breakers and attach DO-NOT-CLOSE tags:
(1)  ELEV/RUD VLV SYS 2, position E7
(2)  ELEV/RUD VLV SYS 4, position E22
(3)  ELEV/RUD VLV SYS 1, position H8
(4)  ELEV/RUD VLV SYS 3, position H23
13. Install the gear door locks. Refer to the 747-400 AMM 32-00-30.
14. Remove hydraulic power. Refer to the 747-400 AMM 29-11-00.
15. Remove electrical power. Refer to the 747-400 AMM 24-22-00.
Horizontal Stabilizer Tank Deactivation Procedure
1. The following circuit breakers are to be opened and remain open throughout the duration of this
HST deactivation procedure.
Location  Name  Circuit Breaker
Panel  Position
P-6  D05  FUEL QTY 1  C10123
P-6  D06  FUEL QTY 2  C10124
P180  M08  FUELING VALVE 2  C00086
P180  M09  FUELING LTS-HOT or FUELING PWR-HOT BATH  C01143
P180  C25  FUELING LIGHTS PANEL (if installed)  C10746
P180  C26  FUELING LTS RECP (if installed)  C10747
P414  F17  FUELING VALVE  C00090
P414  F22  LIGHT FUELING or FUELING POWER  C01142
P415  M14  FUEL OVERFILL CONT  C00062
P6  F06  FUEL SYS MGMT CH 1  C10129
P6  F08  FUEL SYS MGMT CH 2  C10130
E2-6  F9  LEFT EIU  C10174
E2-6  F10  CENTER EIU  C10175
E2-6  F15  RIGHT EIU  C10176
2.  Remove and install plugs for REFUEL & XFR STAB L circuit breaker C10125 and REFUEL &
XFR STAB R circuit breaker C10126. Refer to Figure 1, OVERHEAD CIRCUIT BREAKER
PANEL P7-2 CHANGE.
3.  Modify wire bundle W0007 on P7 Overhead Circuit Breaker Panel as referenced in:
a.  Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b.  Group 2:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details.  33 of 156

### Page 34 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
4. Modify wire bundles W4092 and W4094 on Overhead Circuit Breaker Panel P7 as referenced in:
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
5.  Change AFT Horizontal Stabilizer Fuel Isolation Valves as follows:
Locate two isolation valves on rear spar of H. Stab tank, L aft valve (V435), R aft valve
(V436). Refer to Figure 5, H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85
PANEL CHANGE.
b.  Disconnect electrical connector from valve actuator. Rework wire bundle W4607 and
W4618 as referenced in:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  34 of 156

### Page 35 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
(1) Group 1:
(a) Figure 13, REWORK OF WIRE BUNDLES
(2) Group 2:
(a) Figure 14, REWORK OF WIRE BUNDLES
(3) Group 3:
(a) Figure 17, REWORK OF WIRE BUNDLES
(4) Group 4:
(a) Figure 20, REWORK OF WIRE BUNDLES
(5) Group 5:
(a) Figure 23, REWORK OF WIRE BUNDLES
(6) Group 6:
(a) Figure 27, REWORK OF WIRE BUNDLES
c.  Position manual override lever for affected valves, located on valve actuator, to closed
position and LOCKWIRE. Refer to Figure 2, HORIZONTAL STABILIZER TANK AFT FUEL
TRANSFER SYSTEM LOCATION for location.
6. Change FWD Horizontal Stabilizer Fuel Isolation Valves as follows:
a.  Locate two isolation valves on rear spar of center tank, L fwd valve (V439), R fwd valve
(V440). Refer to Figure 3, HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER
SYSTEM LOCATION, for location.
b.  Disconnect electrical connector from valve actuator. Rework wire bundle W4611 and
W4641 as referenced in:
(1) Group 1:
(a) Figure 13, REWORK OF WIRE BUNDLES
(2) Group 2:
(a) Figure 14, REWORK OF WIRE BUNDLES
(3) Group 3:
(a) Figure 17, REWORK OF WIRE BUNDLES
(4) Group 4:
(a) Figure 20, REWORK OF WIRE BUNDLES
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  35 of 156

### Page 36 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
(5) Group 5:
(a) Figure 23, REWORK OF WIRE BUNDLES
(6) Group 6:
(a) Figure 27, REWORK OF WIRE BUNDLES
C.  Position manual override lever for affected valves, located on valve actuator, to closed
position and LOCKWIRE. Refer to Figure 3, HORIZONTAL STABILIZER TANK FWD FUEL
TRANSFER SYSTEM LOCATION, for location.
7. Modify wire bundle W0144 on Pressure Fueling Control Panel P42. Coil and stow wiring for
indicator, switches, and lights.
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
8.  Install the "H.STAB TANK DEACTIVATED" placard (marker) above H.STAB indicator, Part
Number BAC27EFS595 as given in 747-400 AMM 20-11-06-404-012 ALUMINUM FOIL
MARKER INSTALLATION. Refer to Figure 4, LEFT WING REFUELING PANEL P42
MODIFICATION.
9.  Remove relay R7391 and rework wire bundle W0076 on Center Equipment Panel P54 as
referenced in:
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  36 of 156

### Page 37 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
10. Modify wire bundle W4606 on the Horizontal Stabilizer Refuel Valve Control Unit. Refer to Figure
2, HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION, for
component location.
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
11. Remove "HOR STAB XFER/JETT PUMP L" circuit breaker C03141 and "HOR STAB XFER/
JETT R" circuit breaker C03142. Remove HOR STAB XFER/JETT PUMP LEFT and RIGHT
placard as shown in Figure 5, H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85
PANEL CHANGE.
12. Modify wire bundle W2018 on AFT MISC Circuit Breaker Panel P85 as referenced in:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  37 of 156

### Page 38 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
13. Modify wire bundles W4601 and W4602 on Left AFT Equipment Center E8. Cap and stow pump
wiring and plugs S1884 and S1885 as indicated.
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
14. Remove the fuel transfer line and install plugs as shown in:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  38 of 156

### Page 39 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 1-5: Figure 12, REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER
LINE.
b. Group 6: Figure 26, REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE.
15. Change Horizontal Stabilizer Motor Impeller Assemblies as shown in Figure 6, HORIZONTAL
STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE, and as follows:
a.  Remove two motor impeller assemblies located on the front spar of HST. Refer to 747-400
AMM 28-17-04.
b.  Install two plugs and two associated pins and do the following:
(1)  Install new packing MS29513-007, lubricated with petrolatum, into groove on pin, part
number 835U0002-1.
(2) Put end of pin with packing into housing on top of unit.
(3) Install new packing M25988-1-238, lubricated with petrolatum into groove on plug, part
number 83500001-1.
(4) Carefully push the plug into housing. Make sure that smallest hole is in line with pin on
housing.
(5) Put the bonding clip(s) with the bonding jumpers) attached into position on the plug.
CAUTION:  ENSURE SOCKET HEAD MOUNTING SCREWS ARE P/N MS24674-9 OR
EQUIVALENT ALTERNATIVE (THREAD LENGTH 15MM). QUANTITY (1)
WASHER P/N NAS1149DN832J MUST BE USED AT EACH SCREW
LOCATION.
(6)  Install socket head screws and washers at five locations to fasten the bonding clips and
plug, part number 835U0001-1, to the pump housing.
Install nut, part number BACN10JC06C, and washer, part number NAS620C6 to the
threaded end on pin to secure pin in housing.
16. Modify the Remote Electronic Unit (REU) at M7861 in Equipment Center E8 as shown in Figure
7, REMOTE ELECTRONIC UNIT CHANGES - E8 EQUIPMENT RACK, and as follows:
Remove the "H.STAB INDIVIDUAL FUEL QUANTITY CHANNEL (IFQC) CARD", part
number 60B92018-207 in accordance with 747-400 AMM 28-41-17.
Install the cover plate on the REU, M7861 and tighten the four captive screws.
C.  Placard REU "INOP".
d. Modify wire bundle W3851 on AFT Left Equipment Center E8 as referenced in:
(1) Group 1:
(a) Figure 13, REWORK OF WIRE BUNDLES
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  39 of 156

### Page 40 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
(2) Group 2:
(a) Figure 14, REWORK OF WIRE BUNDLES
(3) Group 3:
(a) Figure 17, REWORK OF WIRE BUNDLES
(4) Group 4:
(a) Figure 20, REWORK OF WIRE BUNDLES
(5) Group 5:
(a) Figure 23, REWORK OF WIRE BUNDLES
(6) Group 6:
(a) Figure 27, REWORK OF WIRE BUNDLES
17. Modify wire bundle W3890 and "reprogram FQIS card file for Horizontal Stabilizer absent".
a. Group 1:
(1) Figure 13, REWORK OF WIRE BUNDLES
b. Group 2:
(1) Figure 14, REWORK OF WIRE BUNDLES
c. Group 3:
(1) Figure 17, REWORK OF WIRE BUNDLES
d. Group 4:
(1) Figure 20, REWORK OF WIRE BUNDLES
e. Group 5:
(1) Figure 23, REWORK OF WIRE BUNDLES
f.  Group 6:
(1) Figure 27, REWORK OF WIRE BUNDLES
18. Change Fuel System Card File as follows:
a. Remove horizontal stabilizer Single Point Sensor Control Card (SPSC) A3, in accordance
with 747-400 AMM 28-17-10 and Figure 8, FUEL SYSTEM CARD FILE CHANGE.
Install cover assembly, part number 285U0096-6, at SPSC installation location. Refer to
Figure 8, FUEL SYSTEM CARD FILE CHANGE.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  40 of 156

### Page 41 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Modify wire bundle W4764 by inserting jumper wire in Fuel System Card File as referenced
in:
(1) Group 1:
(a) Figure 13, REWORK OF WIRE BUNDLES
(2) Group 2:
(a) Figure 14, REWORK OF WIRE BUNDLES
(3) Group 3:
(a) Figure 17, REWORK OF WIRE BUNDLES
(4) Group 4:
(a) Figure 20, REWORK OF WIRE BUNDLES
(5) Group 5:
(a) Figure 23, REWORK OF WIRE BUNDLES
(6) Group 6:
(a) Figure 27, REWORK OF WIRE BUNDLES
d.  Modify wire bundle W4974 on shelf 6 of Main Right Equipment Center E2-6 as referenced in:
(1) Group 1:
(a) Figure 13, REWORK OF WIRE BUNDLES
(2) Group 2:
(a) Figure 14, REWORK OF WIRE BUNDLES
(3) Group 3:
(a) Figure 17, REWORK OF WIRE BUNDLES
(4) Group 4:
(a) Figure 20, REWORK OF WIRE BUNDLES
(5) Group 5:
(a) Figure 23, REWORK OF WIRE BUNDLES
(6) Group 6:
(a) Figure 27, REWORK OF WIRE BUNDLES
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright @ Unpublished Work - See page 1 for details.  41 of 156

### Page 42 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
19. Change P5 Fuel Management Control Panel as follows:
a. Remove the Fuel Management Control module (M00154) from the P5 panel.
(1) Group 1:
(a) Figure 9, FUEL MANAGEMENT CONTROL PANEL CHANGE
(2) Group 2:
(a) Figure 10, FUEL MANAGEMENT CONTROL PANEL CHANGE
(3) Group 3:
(a) Figure 16, FUEL MANAGEMENT CONTROL PANEL CHANGE
(4) Group 4:
(a) Figure 19, FUEL MANAGEMENT CONTROL PANEL CHANGE
(5) Group 5:
(a) Figure 22, FUEL MANAGEMENT CONTROL PANEL CHANGE
(6) Group 6:
(a) Figure 25, FUEL MANAGEMENT CONTROL PANEL CHANGE
b. Modify wire bundles W4751 and W4753 on Pilots Overhead Panel P5 as referenced in:
(1) Group 1:
(a) Figure 13, REWORK OF WIRE BUNDLES
(2) Group 2:
(a) Figure 14, REWORK OF WIRE BUNDLES
(3) Group 3:
(a) Figure 17, REWORK OF WIRE BUNDLES
(4) Group 4:
(a) Figure 20, REWORK OF WIRE BUNDLES
(5) Group 5:
(a) Figure 23, REWORK OF WIRE BUNDLES
(6) Group 6:
(a) Figure 27, REWORK OF WIRE BUNDLES
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  42 of 156

### Page 43 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
20. Group 1-2: Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units
(EIU) E2-6 WIU wire change as in reference Figure 11, DEACTIVATION OF TAIL TANK AT
LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE CHANGE, as follows:
a. Group 1:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right EIUs as shown in Figure 13, REWORK OF
WIRE BUNDLES.
b. Group 2:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right EIUs as shown in Figure 14, REWORK OF
WIRE BUNDLES.
21. Group 3: Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units
(EIU) E2-6 WIU wire change as in reference Figure 15, DEACTIVATION OF TAIL TANK AT
LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE CHANGE, as follows:
a. Group 3:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right EIUs as shown in Figure 17, REWORK OF
WIRE BUNDLES.
22. Group 4: Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units
(EIU) E2-6 WIU wire change as in reference Figure 18, DEACTIVATION OF TAIL TANK AT
LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE CHANGE, as follows:
a. Group 4:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right EIUs as shown in Figure 20, REWORK OF
WIRE BUNDLES.
23. Group 5: Deactivate tail tank at WU for the left, center, and right Electronic Instrument Units
(EIU) E2-6 WIU wire change as in reference Figure 21, DEACTIVATION OF TAIL TANK AT
LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE CHANGE, as follows:
Group 5:
a. Group 5:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right ElUs as shown in Figure 23, REWORK OF
WIRE BUNDLES.
24. Group 6: Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units
(EIU) E2-6 WIU wire change as in reference Figure 24, DEACTIVATION OF TAIL TANK AT
LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE CHANGE, as follows:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  43 of 156

### Page 44 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
Group 6:
a.  Group 6:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right ElUs as shown in Figure 27, REWORK OF
WIRE BUNDLES.
25. Close all circuit breakers that were opened in step 1 above.
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. ALERONS, RUDDERS,
ELEVATORS, FLAPS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE EQUIPMENT.
26. Supply electrical power to airplane. Refer to the 747-400 AMM 24-22-00.
Horizontal Stabilizer Tank Functional Check
1. Group 1-5: Do the following steps to check the IDS program pin configuration:
NOTE: Only check the NON-X values shown in steps c, e, and g below. The "X" values in the
program pin codes shown below are not pertinent to this change and may be any value.
a. Display the configuration maintenance page on the CMC display unit.
b. Put the Captain's and First Officer's source select switches in the L position.
c.  Make sure that the following is displayed:
IDS PROGRAM PINS:
1/XXXX XOXX/32
33/XXXX XX/56 1/P
d. Put the Captain's and First Officer's source select switches in the C position.
e. Make sure that the following is displayed:
IDS PROGRAM PINS:
1/XXXX X0XX/32
33/XXXX XX/56 1/P
f.  Put the Captain's and First Officer's source select switches in the R position.
g.  Make sure that the following is displayed:
IDS PROGRAM PIN:
1/XXXX X0XX/32
33/XXXX XX/56 1/P
2. Do an electrical test of the P42 panel as follows. The airplane must be in the ground mode for
this test:
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  44 of 156

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
a. Open these circuit breakers on the P6 panel:
CB NO.  LOC  Nomenclature
C10123  D05  FUEL QTY 1
C10124  D06  FUEL QTY 2
b.  Open these circuit breakers on the P414 panel:
CB NO.  LOC  Nomenclature
C00090  F17  FUELING VALVE
C01142  F22  FUELING PWR
C10131  M33  HOR STAB SUMP DRAIN VLV
c. Open these circuit breakers on the P180-1 panel:
CB NO.  LOC  Nomenclature
C00086  M08  FUELING VALVE 2
C01143  M09  FUELING LTS - HOT
d. Open the P42 fueling panel door.
e.  On the P42 panel, put the battery switch in the NORM position.
f.  On the P414 panel, position F22, close the circuit breaker C01142, FUELING PWR.
g.  On the P42 panel, push and hold the GAUGES TEST switch. See that all the fuel quantity
indicator displays read 888.8. The horizontal stabilizer indicator will remain blank.
h.  Release the GAUGES TEST switch.
i.  Set the SELECT QTY value to 222.2.
Press the PRESELECT SET QTY switch to the TOTAL position and hold for more than 2
seconds.
k. Release the PRESELECT SET QTY switch.
I.  See that the quantity 222.2 can be seen in the bottom display of the TOTAL FUEL indicator.
m.  On the flight deck, push the FUEL synoptic EICAS display switch.
n.  On the lower EICAS display, see that the fuel quantities are within +/- 200 Ibs (+/- 100 kgs)
of the quantities recorded in Step 6 of the Horizontal Stabilizer Tank Preparation Procedure.
NOTE: Horizontal Stabilizer tank fuel quantity will not be displayed.
o. On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
p. On the P42 panel, see that the refuel indicator displays go blank.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  45 of 156

### Page 46 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
q. On the P42 panel, put the battery switch in the BATT position.
On the P180-1 panel, position M09, close the circuit breaker C01143, FUELING PWR-HOT
BAT.
s. On the P42 panel, see that the refuel indicator quantities are within +/-200 Ibs (+/- 100 kgs)
of the quantities recorded in Step 6 of the Horizontal Stabilizer Tank Preparation Procedure.
NOTE: Horizontal Stabilizer tank fuel quantity will not be displayed.
t.  On the P180-1 panel, position M09, open the circuit breaker C01143, FUELING PWR-HOT
BAT.
u. On the P42 panel, see that the refuel indicator displays go blank.
v. On the P42 panel, put the battery switch in the NORM position.
3.  Do an electrical test of the FQIS display, center tank fuel control card, and secondary valves and
horizontal stabilizer sump drain valves as follows:
a.  On the rear spar of the center tank, disconnect connector DV437 from the left secondary
retuel valve.
b. On the P42 panel, put the CENTER tank valve position control switch in the OPEN position.
c. On the P414 panel, position F22, close the circuit breaker C01142, FUELING PWR.
d. On the rear spar of the center tank, make sure there is 23-30 VDC on DV437, between pins
A and B.
e. On the P42 panel, push and hold the C. TANK SEC. VAL. switch to the CLOSED position.
See that the L and R valve position lights come on.
f. On the rear spar of the center tank, make sure there is 0-3 VDC on DV437, between pins A
and B.
g.  On the rear spar of the center tank, disconnect the left secondary refuel valve pressure
switch connector DS1877. On the P42 panel, see that the secondary refuel valve L valve
position lights goes off.
On the P42 panel, release the C. TANK SEC. VAL. switch.
On the P42 panel, put the CENTER tank valve position control switch in the CLOSED
position.
On the P42 panel, put the ALL VALVES switch in the OPEN position.
k.  On the rear spar of the center tank, make sure there is 23-30 VDC on DV437, between pins
A and B.
On the P42 panel, put the ALL VALVES switch in the CLOSED position.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  46 of 156

### Page 47 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
m. On the rear spar of the center tank, make sure there is 0-3 VDC on DV437, between pins A
and B.
n. On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
o. On the rear spar of the center tank, connect connectors DV437 and DS1877.
On the rear spar of the center tank, disconnect connector DV438 from the right secondary
refuel valve.
q. On the P42 panel, put the CENTER tank valve position control switch in the OPEN position.
On the P414 panel, position F22, close the circuit breaker C01142, FUELING PWR.
s. On the rear spar of the center tank, make sure there is 23-30 VDC on DV438, between pins
A and B.
t.  On the P42 panel, push and hold the C. TANK SEC. VAL. switch to the CLOSED position.
See that the L and R valve position lights come on.
u. On the rear spar of the center tank, make sure there is 0-3 VDC on DV436, between pins A
and B.
v. On the rear spar of the center tank, disconnect the right secondary refuel valve pressure
switch connector DS1876. On the P42 panel, see that the secondary refuel valve R valve
position lights goes off.
w. On the P42 panel, release the C. TANK SEC. VAL. switch.
x. On the P42 panel, put the CENTER tank valve position control switch in the CLOSED
position.
y. On the P42 panel, put the ALL VALVES switch in the OPEN position.
z. On the rear spar of the center tank, make sure there is 23-30 VDC on DV438, between pins
A and B.
aa. On the P42 panel, put the ALL VALVES switch in the CLOSED position.
ab. On the rear spar of the center tank, make sure there is 0-3 VDC on DV438, between pins A
and B.
ac. On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
ad. On the rear spar of the center tank, connect connectors DV438 and DS1876.
ae. On the P414 panel, close the circuit breakers C090, FUELING VALVE, position F17 and
C10131, H/S SUMP DRAIN VALVE, position M33.
af.  On the P211 panel, push the L VALVE (L3666) and R VALVE (L3667) valve power lights.
See that the lights come on when they are pushed.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  47 of 156

### Page 48 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
ag.  On the P211 panel, push the SUMP DRAIN MAINT switch to the open position. On the
horizontal stabilizer, hear that each solenoid valve operates. On the P211 panel, see that
the L VALVE and R VALVE valve power lights come on.
ah. On the P211 panel, push the SUMP DRAIN MAINT switch to CLOSED position.
On the P211 panel, push the SUMP DRAIN CONT switch to the L OPEN position. On the
horizontal stabilizer, hear that the left solenoid valve operates. On the P211 panel, see that
L VALVE valve power light comes on. Put the switch back to the normal position.
aj. On the P211 panel, push the SUMP DRAIN CONT switch to the R OPEN position. On the
horizontal stabilizer, hear that the right solenoid valve operates. On the P211 panel, see that
the R VALVE valve power light comes on. Put the switch back to the normal position.
4. Do an electrical test of the fuel system management cards as follows:
a. On the CMC MCDU, go to the INPUT MONITORING screen.
b. On the P6 panel, close the circuit breaker C10128, FUEL SYS MGMT CARD A, position F5,
and open the circuit breaker C10127, FUEL SYS MGMT CARD B, position F7.
c. On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
d. On the P6 panel, close the circuit breaker C10129, FUEL SYS MGMT CH 1, position F6,
and open the circuit breaker C10130, FUEL SYS MGMT CH 2, position F8.
e. In the fuel system card file (M7852), on the A2 card, see that the CH 1 green LED is on and
the CH 2 green LED is not on.
f.  On the CMC MCDU, put this data in for input monitoring: port "E69," label "270" and sdi "00."
g. In the fuel system card file (M7852), on the A2 card, push and hold the BIT switch to the CH
1 position. See that the CH 1 green LED goes off. On the CMC MCDU see that bit 27 goes
from "1" to "0" (main tank number 2 single point sensor). This can take up to 1 minute to
happen.
h. In the fuel system card file (M7853), on the A2 card, release the BIT switch.
On the P6 panel, open the circuit breaker C10128, FUEL SYS MGMT CARD A, position F5,
open the circuit breaker C10130, FUEL SYS MGMT CH 2, position F8, open the circuit
breaker C10129, FUEL SYS MGMT CH 1, position F6, and open the circuit breaker C10127,
FUEL SYS MGMT CARD B, position F7.
On the P180 panel, close the circuit breaker C10136, FUEL SYS EICAS INTFC CONT,
position H17.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  48 of 156

### Page 49 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
k.  On the CMC MCDU, put this data in for input monitoring: port "E 10", label "274" and sdi "00."
See that this data can be seen. This can take up to 1 minute to happen.
Group 1-5:
Position  29  28  127  26  25  24 23  22 21  • 20
Status  1  1  1  1  • 0
Position  19  18  17  16  15  | 14  | 13  12  • 11
Status  1
Group 6:
Position  29  28  27 26  25  24 23 22  21  120
Status
Position  19  18  17 16  15  14 13 12  / 11
Status  1  1  1
I.  On the CMC MCDU, put this data in for input monitoring: "E 10", label "270" and sdi "00."
m. On the P5 panel, push the MAIN 1 AFT fuel pump switch to ON. See that bit 11 goes from
"0" to "1." This can take up to 1 minute.
n.  On the P5 panel, push the MAIN 1 FWD fuel pump switch to ON. See that bit 12 goes from
"0" to "1." This can take up to 1 minute to happen.
o. On the P5 panel, push the MAIN 2 AFT fuel pump switch to ON. See that bit 13 goes from
"O" to "1". This can take up to 1 minute to happen.
p. On the P5 panel, push the MAIN 2 FWD fuel pump switch to ON. See that bit 14 goes from
"0" to "1." This can take up to 1 minute.
q. On the P5 panel, push the MAIN 3 AFT fuel pump switch to ON. See that bit 15 goes from
"O" to "1." This can take up to 1 minute.
r. On the P5 panel, push the MAIN 3 FWD fuel pump switch to ON. See that bit 16 goes from
"0" to "1." This can take up to 1 minute.
s. On the P5 panel, push the MAIN 4 AFT fuel pump switch to ON. See that bit 17 goes from
"O" to "1." This can take up to 1 minute.
On the P5 panel, push the MAIN 4 FWD fuel pump switch to ON. See that bit 18 goes from
"O" to "1." This can take up to 1 minute.
u. On the P5 panel, push the CTR L fuel pump switch to ON. See that bit 19 goes from "O" to
V. On the P5 panel, push the CTR R fuel pump switch to ON. See that bit 20 goes from "O" to
"1." This can take up to 1 minute.
w. On the P5 panel, push the OVRD 2 MAIN AFT fuel pump switch to ON. See that bit 23 goes
from "0" to "1." This can take up to 1 minute.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  49 of 156

### Page 50 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
x. On the P5 panel, push the OVRD 2 MAIN FWD fuel pump switch to ON. See that bit 24 goes
from "0" to "1." This can take up to 1 minute.
y. On the P5 panel, push the OVRD 3 MAIN AFT fuel pump switch to ON. See that bit 25 goes
from "0" to "1." This can take up to 1 minute.
z. On the P5 panel, push the OVRD 3 MAIN FWD fuel pump switch to ON. See that bit 26 goes
from "0" to "1." This can take up to 1 minute.
aa. On the P5 panel, push the number 1 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 27 goes from "0" to "1." This can take up to 1 minute to happen.
ab. On the P5 panel, push the number 2 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 28 goes from "0" to "1." This can take up to 1 minute to happen.
ac. On the P5 panel, push the number 3 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 29 goes from "0" to "1." This can take up to 1 minute to happen.
ad. On the CMC MCDU, put this data in for input monitoring: port "E 10", label "270" and sdi "10."
ae. On the P5 panel, push the number 4 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 11 goes from "0" to "1." This can take up to 1 minute.
af. On the P5 panel, push all the switches on the M154 module to off.
ag. On the P6 panel, close the circuit breakers C10128, FUEL SYS MGMT CARD A, position
F5, C10127, FUEL SYS MGMT CARD B, position F7, C10129, FUEL SYS MGMT CH 1,
position F6, and C10130, FUEL SYS MGMT CH 2, position F8.
5.  Do the Fuel Quantity indication System Ground test as specified in the 747-400 AMM 28-41-00.
NOTE: Horizontal Stabilizer is now deactivated and NOT to be fueled.
6.  Do the Wing Surge Tank Float Switch Operational Test as specified in the 747-400 AMM
28-21-12.
7. Restore hydraulic power. Refer to the 747-400 AMM 29-11-00.
8. Remove the gear door locks. Refer to the 747-400 AMM 32-00-30.
9. Put the airplane back into serviceable condition.
Original Issue: June 12, 2006
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  50 of 156

### Page 51 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE
P7-2 PANEL
P7 OVERHEAD CIRCUIT
BREAKER PANEL  FWD
FUEL XFR  REFUEL
VALVE  & XER
MAIN  STAB
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE
June 12, 2006  (SHEET 1 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  51 of 156

### Page 52 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane. Each reference drawing listed is a
Module Parts List (MPL). The MPL lists all the retrofit drawings and/or production drawings picture sheets to
facilitate installation of the identified part, assembly or installation.
STEP  TASK  NAME  PART NUMBER  QTY NOTES
1  Remove  Circuit Breaker  BACC18AD7  2
2  Install  Plug Button  2645  2
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE
June 12, 2006  (SHEET 2 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  52 of 156

### Page 53 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION
REFUEL VALVE
CONTROL UNIT
FUEL TRANSFER
PUMPS
STABILIZER  (DRY SIDE)  STABILIZER
FRONT SPAR  FRONT SPAR
REFUEL VALVE
FUEL
TRANSFER
AFT ISOLATION VALVE  PUMP~
(IN HORIZONTAL
STABILIZER TANK)
SEE
> FWD
(WET SIDE)
STABILIZER
REAR SPAR
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION
June 12, 2006  (SHEET 1 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  53 of 156

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
ACTUATOR FOR THE
AFT ISOLATION VALVE
(LEFT-UPPER)
VALVE
ADAPTER
MANUAL OVERRIDE LEVER
(REF)
ACTUATOR FOR THE  REAR SPAR
AFT ISOLATION VALVE  (REF)
(RIGHT-LOWER)
VALVE
ADAPTER
MANUAL OVERRIDE
FWD  LEVER (REF)
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION
June 12, 2006  (SHEET 2 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  54 of 156

### Page 55 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION
CENTER WING TANK
COMPONENTS
SEE
HORIZONTAL STABILIZER
FWD ISOLATION VALVES
SEE
CENTER
WING TANK
FWD
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION
June 12, 2006  (SHEET 1 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  55 of 156

### Page 56 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
VALVE BODY  REAR SPAR
VALVE  • VALVE
ADAPTER  ACTUATOR
FADO
MANGAL
OVERRIDE LEVER
HORIZONTAL STABILIZER ISOLATION VALVE
C
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION
June 12, 2006  (SHEET 2 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  56 of 156

### Page 57 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION
BEAR  00b00
FWD
H. STAB TANK
DEACTIVATED
4.0
4.0
RESERVE 3  H. STAB
OPEN
CLOSED
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION
June 12, 2006  (SHEET 1 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  57 of 156

### Page 58 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane. Each reference drawing listed is a
Module Parts List (MPL). The MPL lists all the retrofit drawings and/or production drawings picture sheets to
facilitate installation of the identified part, assembly or installation.
STEP  TASK  NAME  PART NUMBER  QTY NOTES
Install  Marker  BAC27EFS595  1  Refer to 747-400 AMM 20-11-06.
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION
June 12, 2006  (SHEET 2 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  58 of 156

### Page 59 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE
SEE 1
PSS PANEL
E8 EQUIPMENT RACK
DOOR NO. 5
SVCE OUT
- LAV WATER HTR  CARGO HDLE
AFT R
FC1-FC2 | FC3-FC4 | FCS-FC6
• HOR STAB XFER/JETT PUMP
LEFT
THE BOEING CO.
PART NUMBER
SERIAL NUMBER
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE
June 12, 2006  (SHEET 1 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  59 of 156

### Page 60 (OCR)

BOEING SERVICE BULLETIN 747-28-2275
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane. Each reference drawing listed is a
Module Parts List (MPL). The MPL lists all the retrofit drawings and/or production drawings picture sheets to
facilitate installation of the identified part, assembly or installation.
STEP  TASK  NAME  PART NUMBER  QTY NOTES
1  Remove  Circuit Breakers  BACC18AE25  2
2  Remove  Marker  BAC27EEL23764  1  Refer to 747-400 AMM 20-11-06.
3  Install  Plug Button  2645  2
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE
June 12, 2006  (SHEET 2 OF 2)
Revision 4: February 02, 2009  747-28-2275
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  60 of 156

The text continues at https://openairdocs.org/service-documents/boeing/sb-747-28-2275/file/b76b28025f85.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
