# Boeing Information Service Bulletin 747-28-2295: Revision 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0090; AD 2011-06-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Information Service Bulletin 747-28-2295](https://openairdocs.org/service-documents/boeing/sb-747-28-2295.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 139
- PDF: https://openairdocs.org/files/sha256/89/69/896970f0b5c8acdfd2ad4c5d3fde33ea458f8094f8523c76e02b6eaef176d26e
- Page: https://openairdocs.org/service-documents/boeing/sb-747-28-2295/file/896970f0b5c8

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Commercial
@BOEINE  Airplane  Group  747
Service Bulletin
Number:  747-28-2295
Date:  November 17, 2006
Revision 2:  January 19, 2009
ATA System:  2811
SUBJECT:  CONVERSION AIRPLANE - Boeing Converted Freighter Modification of a 747-400
Passenger Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer
Tank Deactivation
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2006 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third
parties. Treatment of the document and the information it contains is governed by contract with Boeing. For
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10,
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document
or otherwise.
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copynght © Unpublished Work - See page 1 for details.  1 of 139

### Page 2 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
BLANK PAGE
BLANK PAGE
Revision 2 1 Ja 2uary 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  2 of 139

### Page 3 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Table of Contents
Revision Transmittal Sheet.  5
Summary  .. 7
1.  PLANNING INFORMATION.  11
A.  Effectivity .  11
1. Airplanes  11
2. Spares Affected.  12
B.  Concurrent Requirements  12
C.  Reason  12
D.  Description .  12
E.  Compliance.  13
Approval.  13
G.  Manpower  14
H.  Weight and Balance Changes . .  14
Electrical Load Data  14
J  References .  15
1. Existing Data:  15
2. Data supplied with this Service Bulletin:  16
3. Installation Drawings Used in the Preparation of this Service Bulletin:  18
4.  Process Data:  18
K.  Publications Affected  19
Interchangeability and Intermixability of Parts  19
2.  MATERIAL INFORMATION.  21
A.  Material - Price and Availability.  21
B.  Industry Support Information  21
C.  Parts Necessary For Each Airplane  21
1.  Kits/Parts:  21
2. Parts and Materials Supplied by the Operator:  24
3. Parts Modified and Reidentified  24
4. Parts Removed and Not Replaced: .  25
D.  Parts Necessary to Change Spares  30
E.  Special Tooling - Price and Availability.  31
F.  Special Tooling Necessary to do this Service Bulletin.  31
3. ACCOMPLISHMENT INSTRUCTIONS.  33
GENERAL INFORMATION • •  33
B. WORK INSTRUCTIONS... . .  33
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE .  48
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION.  50
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION  52
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION  54
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE  56
FIGURE 6: HORIZONTAL STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE  58
FIGURE 7: FUEL SYSTEM CARD FILE CHANGE  61
FIGURE 8: REMOTE ELECTRONIC UNIT CHANGES - E8 EQUIPMENT RACK  62
FIGURE 9: FUEL MANAGEMENT CONTROL PANEL CHANGE  64
FIGURE 10: FUEL MANAGEMENT CONTROL PANEL CHANGE  65
Table of Contents
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  3 of 139

### Page 4 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 11: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIU WIRE
CHANGE.  66
FIGURE 12: REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE.  . 76
FIGURE 13: REWORK OF WIRE BUNDLES  . 84
FIGURE 14: REWORK OF WIRE BUNDLES  . 87
FIGURE 15: REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE.  . 90
FIGURE 16: FUEL MANAGEMENT CONTROL PANEL CHANGE  • . 97
FIGURE 17: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WU WIRE
CHANGE.  98
FIGURE 18: REWORK OF WIRE BUNDLES  107
FIGURE 19: REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE. .  . 110
FIGURE 20: REWORK OF WIRE BUNDLES  . - 118
FIGURE 21: DEACTIVATION OF TAIL TANK AT LEFT, CENTER, AND RIGHT EIU - E2-6 WIRE CHANGE
(GROUP 4)  121
FIGURE 22: REMOVAL OF HORIZONTAL STABILIZER TANK TRANSFER LINE. . . . •  131
FIGURE 23: FUEL MANAGEMENT CONTROL PANEL CHANGE....... 139
Table of Contents
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  4 of 139

### Page 5 (OCR)

Commercial
BOEING  Airplanes  747
Service Bulletin
Number:  747-28-2295  Revision Transmittal Sheet
Original Issue: November 17, 2006
Revision 2:  January 19, 2009
ATA System: 2811
SUBJECT:  CONVERSION AIRPLANE - Boeing Converted Freighter Modification of a 747-400
Passenger Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer
Tank Deactivation
This Revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed as shown in the Revision 1 of this service bulletin.
Airplane RT837 was added to this service bulletin effectivity and will be included as Group 4 airplane.
REASON FOR REVISION
This Revision adds airplane RT837 (Group 4) to the service bulletin effectivity.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
Original Issue:  November 17, 2006
Revision 1:  March 20, 2008
Revision 2:  January 19, 2009
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  5 of 139

### Page 6 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
BLANK PAGE
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  6 of 139

### Page 7 (OCR)

Commercial
A BOEINE  Airplane  Group  747
Service Bulletin
Number:  747-28-2295  Summary
Date:  November 17,2006
Revision 2:  January 19, 2009
ATA System: 2811
SUBJECT:  CONVERSION AIRPLANE - Boeing Converted Freighter Modification of a 747-400
Passenger Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer
Tank Deactivation
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
As part of the special freighter conversion, the horizontal stabilizer fuel tank is to be deactivated and the fuel
transfer line removed. This service bulletin provides instructions and a kit of parts to do that.
ACTION (MC 0100MK4051, 0100MK4084)
On P7-2 overhead circuit breaker panel, remove the Horizontal Stabilizer REFUEL & XFR circuit breakers
C10125 and C10126. Rework the circuit breaker wiring.
On the horizontal stabilizer refuel valve control unit, disconnect electrical connector, cap and stow wiring.
At the FWD and AFT fuel isolation valves for the horizontal stabilizer transfer system, disconnect the electrical
connector from each valve actuator, coil and stow wiring. Position manual override lever for affected valves,
located on valve actuator, to closed position and lockwire to secure in place.
On the P42 left wing refueling panel coil and stow wiring for indicator, switches and lights. Place "H.STAB TANK
DEACTIVATED" placard above H.STAB indicator.
On P85 panel, remove HOR STAB XFER/JETT PUMP circuit breakers C03141 and C03142. Remove HOR
STAB XFER/JETT PUMP placard below the circuit breakers. Rework circuit breaker wire and pump wiring. Cap
and stow plugs S1884 and S1885 for H.STAB fuel pump low pressure switches.
On the horizontal stabilizer transfer / jettison pumps, remove two motor impeller assemblies located on the front
spar of H. Stab tank. Install plugs and associated pins.
On the E8 equipment rack, in the Remote Electronic Unit (REU), M7861, remove REU cover plate and H.STAB
Individual Fuel Quantity Channel (IFQC) card. Re-install REU cover plate. Placard REU "INOP" and rework the
wiring.
On the Fuel System Card File, remove horizontal stabilizer transfer Single Point Sensor Control (SPSC) card
and install cover assembly. Coil and stow SPSC card wiring. Insert jumper wire in Fuel System Card File.
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details  7 of 139

### Page 8 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
On P5 overhead panel, remove the Fuel Management Control Module (M00154) and rework the wiring.
On the Fuel Quantity Indicating System (FQIS), reprogram FQIS card file for Horizontal Stabilizer absent.
On the Wire Interface Unit (WIU), modify affected wire bundles at WIU.
On the fuel transfer line, remove and discard fuel transfer line from center wing tank to the horizontal stabilizer
fuel tank, and install plugs.
On the E2 equipment rack, make changes to the left, center, and right Electronic Instrument Unit (EIU)
configuration pins to disable the Horizontal Stab Tank display and associated messaging on the Integrated
Display Unit (IDS).
EFFECTIVITY
Group  Operator  Airplanes
CAT  RT518
2  CAT  RT528
CAT  RT461
4  SIA  RT837
COMPLIANCE
No compliance time is given.
INDUSTRY SUPPORT INFORMATION
Boeing Industry Support information is provided in Master Change 0100MK4051 and 0100MK4084.
MANPOWER
Man Hours are not listed in this Service Bulletin. They are negotiated separately between Boeing and the
contracted modification facility.
MATERIAL INFORMATION
Negotiated Kits.
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  8 of 139

### Page 9 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
POSITION MANUAL OVERRIDE
LEVER FOR AFT ISOLATION
VALVES TO CLOSE POSITION
POSITION MANUAL OVERRIDE LEVER  AND DISCONNECT ELECTRICAL
FOR FWD ISOLATION VALVES TO CLOSE  CONNECTOR FROM VALVE
POSITION AND DISCONNECT  ACTUATOR
ELECTRICAL CONNECTOR FROM VALVE
ACTUATOR
REMOVE 2 MOTOR
IMPELLER UNITS.
REMOVE SPS CARD FROM  INSTALL PLUGS
FUEL SYSTEM CARD FILE
AND INSTALL COVER ASSY
~ IN AFT EQUIPMENT RACK E8
REMOVE IFQC CARD IN REU
PLACARD REU INOP. REMOVE 2
CIRUIT BREAKERS ON P85
PANEL.
REMOVE FUEL
MGMT PANEL
IN THE P5
REMOVE HORIZONTAL
STABILIZER FUEL
TRANSFER LINE AND
INSTALL PLUGS
PLACARDH. STAB TANK
REMOVE REFUEL AND  XFR STAB L AND STAB  REFUELING P42 PANEL  DEACTIVATED" ON LEFT WING
R CIRCUIT BREAKERS
ON P7 PANEL  REMOVE RELAYS AND CHANGE THE
CARE RE BE PER ORANG TO
CENTER AND RIGHT EIU ON  1316892
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  9 of 139

### Page 10 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
BLANK PAGE
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  10 of 139

### Page 11 (OCR)

Commercial
@BOEING  Airplanes  747
Service Bulletin
Number:  747-28-2295
Original Issue: November 17, 2006
Revision 2:  January 19, 2009
ATA System:  2811
SUBJECT:  CONVERSION AIRPLANE - Boeing Converted Freighter Modification of a 747-400
Passenger Airplane to a 747-400 Special Freighter (SF) Airplane - Horizontal Stabilizer
Tank Deactivation
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-30300 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. Refer to Master Change 0100MK4051 and
0100MK4084 for data about this change.
GROUP  CONFIGURATION DESCRIPTION
747-400 airplane RT518 to be modified to a
747-400SF.
2  747-400 airplane RT528 to be modified to a
747-400SF.
747-400 airplane RT461 to be modified to a
747-400SF.
747-400 airplane RT837 to be modified to a
747-400SF.
Airplane models:
747-400
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
CATHAY PACIFIC AIRWAYS (CAT)
1  RT518
2  RT528
RT461
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  11 of 139

### Page 12 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
SINGAPORE AIRLINES (SIA)
4 RT837
IDENTIFICATION BY VARIABLE NUMBER
Variable  Group
RT461  3
RT518  1
RT528  2
RT837  4
2. Spares Affected
None.
B. Concurrent Requirements
A Boeing Service Bulletin 747-28-2182, "FUEL - INDICATING - FUEL QUANTITY PROCESSOR AND
REMOTE ELECTRONICS UNIT CHANGE" August 17, 1995, is required to be done prior to or at the
same time with this service bulletin.
The service bulletin is to be accomplished concurrently with the 747-400 Boeing Converted Freighter
Modification.
Group 1-4:
Company Service  Description
Bulletin
Boeing  747-00-2045  This service bulletin is the collector of all lower level service bulletins for Group 1
Boeing Converted Freighter.
Boeing  747-00-2046  This service bulletin is the collector of all lower level service bulletins for Group 2
Boeing Converted Freighter.
Boeing  747-00-2118  This service bulletin is the collector of all lower level service bulletins for Group 3
Boeing Converted Freighter.
Boeing  747-00-2144  This service bulletin is the collector of all lower level service bulletins for Group 4
Boeing Converted Freighter.
C. Reason
As part of the special freighter conversion, the horizontal stabilizer fuel tank is to be deactivated and
the fuel transfer line removed. This service bulletin provides instructions and a kit of parts to do that.
Revision 2 is sent to add airplane RT837 (Group 4) to the service bulletin effectivity.
D. Description
On P7-2 overhead circuit breaker panel, remove the Horizontal Stabilizer REFUEL & XFR circuit
breakers C10125 and C10126. Rework the circuit breaker wiring.
On the horizontal stabilizer refuel valve control unit, disconnect electrical connector, cap and stow
wiring.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  12 of 139

### Page 13 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
At the FWD and AFT fuel isolation valves for the horizontal stabilizer transfer system, disconnect the
electrical connector from each valve actuator, coil and stow wiring. Position manual override lever for
affected valves, located on valve actuator, to closed position and lockwire to secure in place.
On the P42 left wing refueling panel coil and stow wiring for indicator, switches and lights. Place
"H.STAB TANK DEACTIVATED" placard above H.STAB indicator.
On P85 panel, remove HOR STAB XFER/JETT PUMP circuit breakers C03141 and C03142. Remove
HOR STAB XFER/JETT PUMP placard below the circuit breakers. Rework circuit breaker wire and
pump wiring. Cap and stow plugs S1884 and S1885 for H.STAB fuel pump low pressure switches.
On the horizontal stabilizer transfer / jettison pumps, remove two motor impeller assemblies located
on the front spar of H. Stab tank. Install plugs and associated pins.
On the E8 equipment rack, in the Remote Electronic Unit (REU), M7861, remove REU cover plate and
H.STAB Individual Fuel Quantity Channel (IFQC) card. Re-install REU cover plate. Placard REU
"INOP" and rework the wiring.
On the Fuel System Card File, remove horizontal stabilizer transfer Single Point Sensor Control
(SPS) card and install cover assembly. Coil and stow SPSC card wiring. Insert jumper wire in Fuel
System Card File.
On P5 overhead panel, remove the Fuel Management Control Module (M00154) and rework the
wiring.
On the Fuel Quantity Indicating System (FQIS), reprogram FQIS card file for Horizontal Stabilizer
absent.
On the Wire Interface Unit (WIU), modify affected wire bundles at WIU.
on there ease and instal yuge  On the fuel transfer line, remove and discard fuel transfer line from center wing tank to the horizontal
On the E2 equipment rack, make changes to the left, center, and right Electronic Instrument Unit (EIU)
configuration pins to disable the Horizontal Stab Tank display and associated messaging on the
Revision 2 - No more work is necessary on airplanes changed as shown in Revision 1 of this service
bulletin.
E. Compliance
No compliance time is given.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this service bulletin comply with the applicable regulations and are FAA approved. This
service bulletin and the FAA approval were based on the airplane in its original Boeing delivery
configuration or as modified by other FAA approved Boeing changes.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  13 of 139

### Page 14 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency
approval before incorporating this service bulletin.
G. Manpower
Man Hours are not listed in this Service Bulletin. They are negotiated separately between Boeing and
the contracted modification facility.
H. Weight and Balance Changes
Boeing requires that, because of the magnitude and uniqueness of major modification programs, the
total airplane weight and center of gravity will be determined by actual weighing after all modifications
are complete and prior to delivery. The actual data will be recorded and placed in Chapter 2 of the
Weight and Balance Manual.
Electrical Load Data
Group 1-3: Refer to Document Number D828B006-1001 for Electrical Load Data.
Group 4: Refer to Document Number D828B001-1007 for Electrical Load Data.
NOTE: The electrical loads of CAT Model 747-400B airplanes RT518, RT528, RT461and RT837 as
specified in document D281U002-422 have been reviewed and the following loads were
deleted.
1. Direct Current (DC) Loads
Airplanes  Nomenclature  Connected  Circuit  Bus
Load  Breaker
RT518,  Refuel and Transfer  1.40  10125  DC1P7
RT528,  Stabilizer - Left
RT461,
RT837  Refuel and Transfer  1.40  10126  DC2P7
Stabilizer - Right
2. Alternating Current (AC) Loads
Airplanes  Nomenclature  Connected Load  Circuit  Bus
Breaker
RT518,  Horizontal Stabilizer  4.600KVA.76PF  3141  GSB-3
RT528,  Boost Pump - Fwd
RT461,
RT837  Horizontal Stabilizer  4.600KVA.76PF  3142  AC2P85P183
Boost Pump - Aft
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  14 of 139

### Page 15 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
J. References
1. Existing Data:
a. Engineering Change Memo MC 0100MK4051 and MC 0100MK4084.
b. 747-400 Aircraft Maintenance Manual (AMM) 12-11-10, 20-11-06, 20-11-16, 24-22-00,
28-11-00, 28-17-01, 28-17-04, 28-17-06, 28-17-10, 28-21-12, 28-22-00, 28-26-00,
28-41-00, 28-41-17, 29-11-00, 32-00-30
c. 747-400 Wiring Diagram Manual (WDM) 24-51-26, 24-51-64, 24-54-23, 28-21-11,
28-21-12, 28-21-13, 28-21-21, 28-21-23, 28-21-24, 28-21-25, 28-21-26, 28-21-27,
28-21-28, 28-21-29, 28-21-30, 28-21-31, 28-42-15, 28-43-12, 28-54-13, 31-61-12,
31-61-22, 31-61-32
d. 747-400SF Structural Repair Manual (SRM) 51
e. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-20-00
Boeing Parts Standards Document, D-590.
g. Electrical Load Data Document, D828B006-1001and D828B001-1007.
h. Boeing Service Bulletins: Refer to section 1.B., Concurrent Requirements.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  15 of 139

### Page 16 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
2. Data supplied with this Service Bulletin:
NOTE:
The Module Parts List (MPL) drawings listed below will not be shipped with this
service bulletin. Drawing access will be given to the modification site through My
Boeing Fleet (MBF). This was negotiated by the operator and modification facility
under Master Change 0100MK4051 and 0100MK4084.
2.  Within the MPL is a list of the retrofit and/or production drawing picture sheets
required to facilitate installation of the identified part, assembly or installation as
given in this service bulletin
Group 1: RMC 800B0337-1 is a collector for all MPL's as shown on the table.
MPL  TITLE  DRAWING  SHEET REV
NUMBER
834B0401-1001 FUEL TANK DEACTIVATION - HORIZONTAL STABILIZER 834B0401  MPL  E
148U0002
148U0002  DL
284U1255  1
284U1255  DL
284U4219  7
344U1011  4
344U1011  DL
344U1014  B
344U1014  IDL  B
344U1022  1  IK
344U1022  2  G
344U1022  DL
344U1023  2
344U1023  DL
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  16 of 139

### Page 17 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 2: RMC 800B0346-1 is a collector for all MPL's as shown on the table
MPL  TITLE  DRAWING  SHEET REV
NUMBER
834B0401-1001 FUEL TANK DEACTIVATION - HORIZONTAL STABILIZER  834B0401  IMPL  E
148U0002  1  A
14800002  DL
284U1255  1
28401255  DL
284U4219  7
344U1011  4
344U1011  DL
344U1014  1
344U1014  DL  B
34401022  1  K
344U1022  | 2
34401022  IDL
344U1023  2
344U1023  DL
Group 3: RMC 800B0755-1
MPL  TITLE  DRAWING  SHEET REV
NUMBER
834B0401-1001  FUEL TANK DEACTIVATION - HORIZONTAL STABILIZER  834B0401  MPL  F
148U0002  1
148U0002  DL
284U1255  1  C
284U1255  DL
284U4219  7
344U1011  4
| 344U1011  IDL
344U1014  B
344U1014  IDL  B
344U1022  1  K
344U1022  2  G
344U1022  DL
344U1023  2
344U1023  IDL
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  17 of 139

### Page 18 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 4: RMC 800B0755-3 is a collector for all MPL's as shown on the table
MPL  TITLE  DRAWING  SHEET  TREV
NUMBER
834B0401-1001 | FUEL TANK DEACTIVATION - HORIZONTAL STABILIZER  834B0401  MPL  IF
148U0002  1  A
148U0002  DL
284U1255  1
284U1255  DL  LA
284U4219  7
344U1011  4
344U1011  DL
344U1014
344U1014  IDL  B
344U1022
344U1022  2  G
344U1022  IDL
344U1023
344U1023  IDL
828B4114  1
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
4. Process Data:
Boeing Process specifications referred to on the drawings are not given in this service bulletin
since these procedures are frequently used as standard shop practices.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  18 of 139

### Page 19 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
K. Publications Affected
Publication  Chapter-Section
747 FAA Approved Airplane Flight Manual
747-400 Flight Crew Operations Manual  6.20, L. 10, 12.10, 12.20, 12.30, NNC.12,
NP.21
747 Maintenance Manual
747 Wiring Diagram Manual
747 Fault Reporting Manual
747 Fault Isolation Manual
747 Illustrated Parts Catalog
Ramp Maintenance Manual
11-13, 28-10, 28-30, and 28-40 (Dual
configuration already exists)
24-51, 24-54, 28-21, 28-22, 28-27, 28-41,
28-42, 28-43, 28-51, and 31-61
28-10
28 CMCS Index, 28 EICAS Index
28-22, 28-26, and 28-41
28-00
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability
information.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  19 of 139

### Page 20 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
BLANK PAGE
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  20 of 139

### Page 21 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing supplies the kits shown in Paragraph 2. C., Parts Necessary For Each Airplane. This was
negotiated with the operator under Master Change 0100MK4051 and 0100MK4084.
B. Industry Support Information
Boeing Industry Support Information is provided in Master Change 0100MK4051 and 0100MK4084.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  21 of 139

### Page 22 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
NOTE:  One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
Kit 834B0401
QTY
New Part  Existing Part
Number  1001  Name  Number  Notes
834B0401-1001  FUEL TANK DEACTIVATION -  (a)
HORIZONTAL STABILIZER
285U0096-6  1  COVER ASSY
65B02637-22  BLANKING PLATE
65B02637-28  1  GASKET
835B0004-1  PLUG - CONNECTOR FITTING,
HST FUEL TRANSFER LINE
835U0001-1  2  MACHINED PARTS DETAILS-
PLUG
835U0002-1  2  MACHINED PARTS DETAILS-PIN
AS5168W32  2  PLUG, FLARED TUBE  (b)
BAC27EFS595  1  MARKER
BAC27TFDE0013  VINYL DECAL- (INOP)
MS21913W32  1 PLUG, FLARELESS  (b) (c)
(a) Kit has more parts than necessary. Discard extra parts or keep them for other use.
(b) Optional to AS5168W32 in the forward fitting 344U0014 only.
(c) MS21913W32 is a substitute for AS5168W32
Group 1-2:
Kit 826B4260
QTY  Existing Part
New Part Number  Name  Number  Notes
829B9006-14  1  Wire
Group 3:
Kit 826B4970-10, 826B4980-12, 826B4990-10
QTY  Existing Part
New Part Number  Name  Number  Notes
829B9006-36  1  Wire
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  22 of 139

### Page 23 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 4:
Kit 826B4970-8, 826B4980-7
QTY  Existing Part
New Part Number  Name  Number  Notes
829B9006-37  1  Wire
Group 4:
Kit 826B4990-7
QTY  Existing Part
New Part Number  Name  Number  Notes
829B9006-4  1  Wire
Group 2-3: Additional Installs
PART NUMBER  NAME  QTY REMOVAL  REMOVAL NOTES:
INSTALL P/N  DRAWING  INSTL REF
REF  REF
AS5168W32 (Opt  Plug  834B0401-1001
MS21913W32)
MS29512-32  O-Ring  834B0401-1001
835B0004-1  Plug  834B0401-1001
MS29513-241  O-Ring  834B0401-1001
MS20995NC32  Lockwire  834B0401-1001
AS5168W32  Plug  834B0401-1001
MS29512-32  O-Ring  834B0401-1001
BACC14AD06D  Cap  834B0401-1001
Group 4: Additional Installs
PART NUMBER  NAME  QTY REMOVAL  REMOVAL  NOTES:
INSTALL P/N  DRAWING  INSTL REF
REF  REF
AS5168W32 (Opt  Plug  1  834B0401-1001
MS21913W32)
MS29512-32  O-Ring  1  834B0401-1001
835B0004-1  Plug  1  834B0401-1001
MS29513-241  O-Ring  834B0401-1001
MS20995NC32  Lockwire  834B0401-1001
AS5168W32  Plug  1  834B0401-1001
MS29512-32  O-Ring  1  834B0401-1001
BACC14AD06D  Cap  1  834B0401-1001
MS29513-007  Packing  2  834B0401-1001
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  23 of 139

### Page 24 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 4: Additional Installs
PART NUMBER  NAME  QTY  REMOVAL  REMOVAL  NOTES:
INSTALL P/N  | DRAWING  INSTL REF
REF  REF
M25988-1-238  Packing  2  834B0401-1001
BACN10JC06C  Nut  2  834B0401-1001
NAS620C6  Washer  2  834B0401-1001
2. Parts and Materials Supplied by the Operator:
Part Number / Specification  QTY Name  Notes
2645  4  Plug Button  (a)
(a) PALL AEROPOWER CORP
5775 RIO VISTA
CLEARWATER FL 33760
USA
727-539-8448
3. Parts Modified and Reidentified:
None
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  24 of 139

### Page 25 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
4. Parts Removed and Not Replaced:
Group 1-3:
Existing
Part Number  Name  QTY  Notes
60-72101-1 or 60-72102-4  Motor-Impeller Assembly  2  Refer to 747-400 AMM 28-17-04
(Boeing Part Number  (a)
60B92603-22 or 60B92603-26)
S344T002-8  Horizontal Stabilizer  1  Refer to 747-400 AMM 28-17-10
Transfer Single Point  (a)
Sensor Control Card
(SPSC) A3
60B92018-207  Individual Fuel Quantity  1  Refer to 747-400 AMM 28-41-17
Channel (IFQC) Card  (a)
Y5XA1
R7391  Relay  1  Located on P54 panel
10-60536-25 (opt 10-60536-22)  Hose Assy  1
344U0000-6  Fitting  1
344U1022-10  Tube Assy
344U1022-11  Tube Assy
344U1022-12  Tube Assy  1
344U1022-13  Tube Assy  1
344U1022-14  Tube Assy
344U1022-2  Tube Assy  1
344U1022-22  Sleeve
344U1022-23  Shroud
344U1022-25  Tube Assy  1
344U1022-26  Tube Assy  1
344U1022-5  Tube Assy  3
344U1022-8  Tube Assy  1
344U1022-9  Tube Assy  1
6305B374S48-03  Nut Assy  2
6305B381S48-1  Shroud Connector  1
63211-48  Coupling Assy  1
69B92447-39  Spacer  1  (b)
69B92447-52  Spacer  1  (b)
69B92447-8  Spacer  1  (b)
AN735D48  Clamp, Loop  20
AS1712D48  Coupling  11
BACB30NM3HK7  Bolt  6
BACC10CC48  Clamp, U-style
BACC10CC48S  Clamp  1  (b)
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  25 of 139

### Page 26 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 1-3:
Existing
Part Number  Name  QTY Notes
BACC10EW48A  Clamp, U-style  60
BACC10EW48B  Clamp, U-style  60
BACJ40A20-3  Bonding Jumper  2
BACJ40A20-4  Bonding Jumper  4
BACJ40A20-5  Bonding Jumper  9
BACS40R008E048F  Shim, Laminated  1
MS24665-144  Pin  4
MS29513-234  O-ring  2
MS29513-241  O-ring  1
MS29513-338  O-ring  26
NAS1523AA3R  Washer
344U0000-2  Fitting  1
MS29513-241  O-ring
AP7102D32-1 (opt  Union  1
AFP720D3232 or AP7102D32
or MS21900D32)
MS29512-32  O-ring  1
344U0018-8 (opt 344U0018-5)  Tube Assy  1
10-60536-23  Hose Assy  1
BACC18AD7  Circuit Breaker  2
BACC18AE25  Circuit Breaker  2
BAC27EEL23764  Marker  1  Refer to 747-400 AMM 20-11-06
233U3100-247  Fuel Management Panel  1
Assy
(a) Keep the part if there are other uses for it.
(b) Quantity used varies.
- -  Group 4:  Existing
Part Number  Name  QTY  Notes
60-72101-1 or 60-72102-4  Motor-Impeller Assembly  2  Refer to 747-400 AMM 28-17-04
(Boeing Part Number  (a)
60B92603-22 or 60B92603-26)
S344T002-8  Horizontal Stabilizer  1  Refer to 747-400 AMM 28-17-10
Transfer Single Point  (a)
Sensor Control Card
(SPSC) A3
60B92018-207  Individual Fuel Quantity  1  Refer to 747-400 AMM 28-41-17
Channel (IFQC) Card
Y5XA1
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details.  26 of 139

### Page 27 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 4:
Existing
Part Number  Name  QTY  Notes
R7391  Relay  1  Located on P54 pane
10-60536-25 (opt 10-60536-22)  Hose Assy  1
344U0000-6  Fitting
344U1022-10  Tube Assy
344U1022-11  Tube Assy  1
344U1022-12  Tube Assy  1
344U1022-13  Tube Assy  1
344U1022-14  Tube Assy  1
344U1022-2  Tube Assy  1
344U1022-22  Sleeve  2
344U1022-23  Shroud  1
344U1022-25  Tube Assy  1
344U1022-26  Tube Assy
344U1022-5  Tube Assy  3
344U1022-8  Tube Assy
344U1022-9  Tube Assy
6305B374S48-03  Nut Assy  2
6305B381S48-1  Shroud Connector
63211-48  Coupling Assy
69B92447-39  Spacer  1
69B92447-52  Spacer  1
69B92447-8  Spacer  1
AN735D48  Clamp, Loop  20
AS1712D48  Coupling
BACB30NM3HK7  Bolt
BACC10CC48  Clamp, U-style
BACC10CC48S  Clamp
BACC10EW48A  Clamp, U-style  61
BACC10EW48B  Clamp, U-style  61
BACJ40A20-3  Bonding Jumper  2
BACJ40A20-4  Bonding Jumper  4
BACJ40A20-5  Bonding Jumper  9
MS24665-144  Pin  4
M25988-1-234  O-ring  2
M25988-1-241  O-ring  2
M25988-1-338  O-ring  26
NAS1523AA3R  Washer  6
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  27 of 139

### Page 28 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 4:
Existing
Part Number  Name  QTY  Notes
344U0000-2  Fitting  1
AP7102D32-1 (opt  Union  1
AFP720D3232 or AP7102D32
or MS21900D32)
MS29512-32  O-ring  1
344U0018-12 (opt 344U0018-8)  Tube Assy
10-60536-23  Hose Assy  1
BACC18AD7  Circuit Breaker  2
BACC18AE25  Circuit Breaker  2
BAC27EEL23764  Marker  1  Refer to 747-400 AMM 20-11-06
233U3100-247  Fuel Management Panel  1
Assy
(a) Keep the part if there are other uses for it.
(b) Quantity used varies.
Group 2: Additional Removals
PART NUMBER  NAME  QTY  REMOVAL  REMOVAL  NOTES
INSTALL P/N  DRAWING
REF  REF
10-60536-25  Hose Assy  1  344U1022-100  344U1022
344U0000-6  Fitting  344U1022-100  344U1022
344U1022-10  Tube Assy  344U1022-100  344U1022
344U1022-11  Tube Assy  1  344U1022-100  344U1022
344U1022-12  Tube Assy  344U1022-100  344U1022
344U1022-13  Tube Assy  1  344U1022-100  344U1022
344U1022-14  Tube Assy  1  344U1022-100  344U1022
344U1022-2  Tube Assy  344U1022-100  344U1022
344U1022-22  Sleeve  1  344U1022-100  344U1022
344U1022-23  Shroud  344U1022-100  344U1022
344U1022-25  Tube Assy  344U1022-100  344U1022
344U1022-26  Tube Assy  344U1022-100  344U1022
344U1022-5  Tube Assy  3  344U1022-100  344U1022
344U1022-8  Tube Assy  344U1022-100  344U1022
344U1022-9  Tube Assy  344U1022-100  344U1022
6305B374S48-03  Nut Assy  2  344U1022-100  344U1022
6305B381S48-1  Shroud Connector  344U1022-100  344U1022
63211-48  Coupling Assy  344U1022-100  344U1022
69B92447-39  Spacer  344U1022-100  344U1022
69B92447-52  Spacer  344U1022-100  344U1022
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unp  blished Work - See page 1 for details.  28 of 139

### Page 29 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group 2: Additional Removals
PART NUMBER  NAME  QTY  REMOVAL  REMOVAL  NOTES
INSTALL P/N  DRAWING
REF  REF
69B92447-8  Spacer  1  344U1022-100  344U1022
AN735D48  Clamp, Loop  20  344U1022-100  344U1022
AS1712D48  Coupling  11  344U1022-100  344U1022
BACB30NM3HK7  Bolt  6  344U1022-100  344U1022
BACC10CC48  Clamp, U-Style  3  344U1022-100  344U1022
BACC10CC48S  Clamp  1  34401022-100  344U1022
BACC10EW48A  Clamp, U-Style  61  344U1022-100  344U 1022
BACC10EW48B  Clamp, U-Style  61  344U1022-100  344U1022
BACJ40A20-3  Bonding Jumper  12  344U1022-100  344U1022
BACJ40A20-4  Bonding Jumper  4  344U1022-100  344U1022
BACJ40A20-5  Bonding Jumper  9  344U1022-100  344U1022
BACS40R008E048F  Shim, Laminated  1  34401022-100  344U1022
MS24665-144  Pin  4  344U1022-100  344U1022
M25988-1-234  O-Ring  2  344U1022-100  344U1022
M25988-1-241  O-Ring  344U1022-100  344U1022
M25988-1-338  O-Ring  26  344U1022-100  344U1022
NAS1523AA3R  Washer  6  344U1022-100  344U1022
344U0000-2  Fitting  1  344U1022-100  344U1022
M25988-1-241  O-Ring  1  344U1022-100  344U1022
AP7102D32  Union  344U1022-100  344U1022
MS29512-32  O-Ring  344U1022-100  344U1022
344U0018-12  Tube Assy  344U1022-100  344U1022
10-60536-23  Hose Assy  344U1022-100  344U1022
Group 3: Additional Removals
PART NUMBER  NAME  QTY  REMOVAL  REMOVAL  NOTES
INSTALL P/N  DRAWING
REF  REF
10-60536-25  Hose Assy  344U1022-24  344U1022
34400000-6  Fitting  344U1022-24  344U1022
344U1022-10  Tube Assy  344U1022-24  344U1022
344U1022-11  Tube Assy  344U1022-24  344U1022
344U1022-12  Tube Assy  1  344U1022-24  344U1022
344U1022-13  Tube Assy  344U1022-24  344U1022
344U1022-14  Tube Assy  344U1022-24  344U1022
344U1022-2  Tube Assy  1  344U1022-24  344U1022
344U1022-22  Sleeve  344U1022-24  344U1022
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  29 of 139

### Page 30 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Group _ 3: Additional Removals
PART NUMBER  NAME  QTY  REMOVAL  REMOVAL  NOTES
INSTALL P/N  DRAWING
REF  REF
344U1022-23  Shroud  344U1022-24  344U1022
344U1022-25  Tube Assy  1  344U1022-24  344U1022
344U1022-26  Tube Assy  1  344U1022-24  344U1022
344U1022-5  Tube Assy  3  344U1022-24  344U1022
344U1022-8  Tube Assy  1  344U1022-24  344U1022
344U1022-9  Tube Assy  1  344U1022-24  344U1022
6305B374S48-03  Nut Assy  2  344U1022-24  344U1022
6305B381S48-1  Shroud Connector  1  344U1022-24  34401022
63211-48  Coupling Assy  1  344U1022-24  344U1022
69B92447-39  Spacer  344U1022-24  344U1022
69B92447-52  Spacer  1  344U1022-24  344U1022
69B92447-8  Spacer  344U1022-24  344U1022
AN735D48  Clamp, Loop  20  344U1022-24  344U1022
AS1712D48  Coupling  11  344U1022-24  344U1022
BACB30NM3HK7  Bolt  6  344U1022-24  344U1022
BACC10CC48  Clamp, U-Style  3  344U1022-24  344U1022
BACC10CC48S  Clamp  1  344U1022-24  344U1022
BACC10EW48A  Clamp, U-Style  60  344U1022-24  344U1022
BACC10EW48B  Clamp, U-Style  60  344U1022-24  344U1022
BACJ40A20-3  Bonding Jumper  2  344U1022-24  344U1022
BACJ40A20-4  Bonding Jumper  4  344U1022-24  344U1022
BACJ40A20-5  Bonding Jumper  9  344U1022-24  344U1022
BACS40R008E048F  Shim, Laminated  344U1022-24  344U1022
MS24665-144  Pin  4  344U1022-24  344U1022
M25988-1-234  O-Ring  2  344U1022-24  344U1022
M25988-1-241  O-Ring  2  344U1022-24  344U1022
M25988-1-338  O-Ring  26  344U1022-24  344U1022
NAS1523AA3R  Washer  6  344U1022-24  344U1022
344U0000-2  Fitting  1  344U1022-24  344U1022
AP7102D32  Union  344U1022-24  344U1022
MS29512-32  O-Ring  1  344U1022-24  344U1022
344U0018-8  Tube Assy  1  344U1022-24  344U1022
10-60536-23  Hose Assy  1  344U1022-24  344U1022
D. Parts Necessary to Change Spares
None.
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  30 of 139

### Page 31 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
E. Special Tooling - Price and Availability
The operator can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this
Service Bulletin. Tool price and supply data are not given.
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be
necessary. Examine operator tool supply to make sure all necessary tools are available.
Tool Kit Number  Name
Shop Supply  ESDS Wrist Strap (1 required)
Shop Supply  Jumper Wire (4 required)
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  31 of 139

### Page 32 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
BLANK PAGE
November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  32 of 139

### Page 33 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION:  KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3.  Unless shown differently, these dimensions and tolerances are used:
Linear dimensions are in inches
- Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch.
Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
Angular tolerance is plus or minus 2 degrees
Hole dimensions for standard solid rivets are given in 747-400SF Structural Repair
Manual, Chapter 51(747-400SF SRM 51).
Torque limits to tighten nuts and bolts are given in 747-400SF Structural Repair
Manual, Chapter 51(747-400SF SRM 51).
4. For approved fastener and process material substitutions, refer to 747-400SF Structural
Repair Manual, Chapter 51 (747-400SF SRM 51).
5. Refer to the Boeing Standard Wiring Practices Manuals 20-10-11 and 20-10-12 for the
wire installation procedures (SWPM 20-10-11and SWPM 20-10-12).
6. If the length of fasteners specified in this service bulletin do not meet the installation
standards, fasteners of the same specification, or an approved substitute, one grip
length longer or shorter may be used
7. Refer to the BSWPM 20-20-00 (SWPM 20-20-00) the necessary grounding procedures.
This is the same as BAC5117 which is used on the drawings.
B. WORK INSTRUCTIONS
Horizontal Stabilizer Tank Preparation
1. Defuel Horizontal Stabilizer Tank (HST) per 747-400 AMM 28-26-00. In addition, defuel Main
Tanks 2 and 3 sufficiently to allow the Fill/Jettison Manifold to drain.
2. Sump HST per 747-400 AMM 12-11-10.
Open the following circuit breakers and attach DO-NOT-CLOSE tag on the P7 Overhead Circuit
Breaker Panel:
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  33 of 139

### Page 34 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
a. 7H25 REFUEL & XFR STAB L.
b. 7H26 REFUEL & XFR STAB R.
Manually open one of the horizontal stabilizer isolation valves at the rear spar of the center wing
tank. Refer to 747-400 AMM 28-17-01.
NOTE: This will let fuel from the fuel transfer line drain into main tanks 2 and 3.
5.  On the flight deck push FUEL synoptic EICAS display switch.
6. On the lower EICAS display, record the fuel quantity for all displayed tanks.
7. After the fuel has drained from the fuel transfer line, manually close the horizontal stabilizer
isolation valve that was opened.
8. Close the circuit breakers opened in step 3 above.
9. Purge the fuel tanks as specified in 747-400 AMM 28-11-00. Prepare the horizontal stabilizer for
entry.
10. Clean and corrosion protect HST as necessary to prepare for deactivation in accordance with
747-400 AMM 28-11-00.
11. Close HST (do not put fuel into the HST).
12. Put the stabilizer in the neutral trim position (3 units of trim) as follows:
a. Supply electrical power. Refer to the 747-400 AMM 24-22-00.
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL
CONTROL SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER.
AILERONS, RUDDERS, ELEVATORS, FLAPS, SPOILERS, LANDING GEAR,
AND THRUST REVERSERS CAN MOVE QUICKLY WHEN YOU SUPPLY
HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE
TO EQUIPMENT.
b.  Supply hydraulic power. Refer to the 747-400 AMM 29-11-00.
c. Use the STAB TRIM ALTN switches to set the horizontal stabilizer to the neutral rig position
(3 units of trim).
d. Set the STAB TRIM 2 and 3 switches on the control stand to CUTOUT.
e. On the P7 panel, open the L STAB TRIM S/O VLV circuit breaker (position E7) and the R
STAB TRIM S/O VLV circuit breaker (position E20) and attach DO-NOT-CLOSE tabs.
Set all FLT CONTROL HYD POWER TAIL switches on the P461 pilots overhead
maintenance panel to SHUTOFF.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  34 of 139

### Page 35 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
g. On the P180 panel, open these circuit breakers and attach DO-NOT-CLOSE tags:
(1)  ELEV/RUD VLV SYS 2, position E7
(2)  ELEV/RUD VLV SYS 4, position E22
(3)  ELEV/RUD VLV SYS 1, position H8
(4)  ELEV/RUD VLV SYS 3, position H23
13. Install the gear door locks. Refer to the 747-400 AMM 32-00-30.
14. Remove hydraulic power. Refer to the747-400 AMM 29-11-00.
15. Remove electrical power. Refer to the 747-400 AMM 24-22-00.
Horizontal Stabilizer Tank Deactivation Procedure
1. The following circuit breakers are to be opened and remain open throughout the duration of this
HST deactivation procedure.
Location  Name  Circuit Breaker
Panel  Position
P-6  D05  FUEL QTY 1  C10123
P-6  D06  FUEL QTY 2  C10124
P180  M08  FUELING VALVE 2  C00086
P180  M09  FUELING LTS-HOT or FUELING PWR-HOT BATH  C01143
P180  C25  FUELING LIGHTS PANEL (if installed)  C10746
P180  C26  FUELING LTS RECP (if installed)  C10747
P414  F17  FUELING VALVE  C00090
P414  F22  LIGHT FUELING or FUELING POWER  C01142
P415  M14  FUEL OVERFILL CONT  C00062
P6  F06  FUEL SYS MGMT CH 1  C10129
P6  F08  FUEL SYS MGMT CH 2  C10130
E2-6  F9  LEFT EIU  C10174
E2-6  F10  CENTER EIU  C10175
E2-6  F15  RIGHT EIU  C10176
2.  Remove and install plugs for REFUEL & XFR STAB L circuit breaker C10125 and REFUEL &
XFR STAB R circuit breaker C10126. Refer to Figure 1.
3. Modify wire bundle W0007 on P7 Overhead Circuit Breaker Panel.
a. Group 1: Figure 13
b. Group 2: Figure 14
c. Group 3: Figure 18
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  35 of 139

### Page 36 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
d. Group 4: Figure 20
4. Modify wire bundles W4092 and W4094 on Overhead Circuit Breaker Panel P7.
a. Group 1: Figure 13
b. Group 2: Figure 14
c. Group 3: Figure 18
d. Group 4: Figure 20
5. Change AFT Horizontal Stabilizer Fuel Isolation Valves as follows:
a.  Locate two isolation valves on rear spar of H. Stab tank, L aft valve (V435), R aft valve
(V436). Refer to Figure 5.
b.  Disconnect electrical connector from valve actuator. Rework wire bundle W4607 and
W4618.
(1) Group 1: Figure 13
(2) Group 2: Figure 14
(3) Group 3: Figure 18
(4) Group 4: Figure 20
c.  Position manual override lever for affected valves, located on valve actuator, to closed
position and LOCKWIRE. Refer to Figure 2 for location.
6.  Change FWD Horizontal Stabilizer Fuel Isolation Valves as follows:
a.  Locate two isolation valves on rear spar of center tank, L fwd valve (V439), R fwd valve
(V440). Refer to Figure 3 for location.
b.  Disconnect electrical connector from valve actuator. Rework wire bundle W4611 and
W4641.
(1) Group 1: Figure 13
(2) Group 2: Figure 14
(3) Group 3: Figure 18
(4) Group 4: Figure 20
c.  Position manual override lever for affected valves, located on valve actuator, to closed
position and LOCKWIRE. Refer to Figure 3 for location.
7. Modify wire bundle W0144 on Pressure Fueling Control Panel P42.
a. Group 1: Figure 13
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  36 of 139

### Page 37 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
b. Group 2: Figure 14
c. Group 3: Figure 18
d. Group 4: Figure 20
Coil and stow wiring for indicator, switches, and lights.
8. Install the "H.STAB TANK DEACTIVATED" placard (marker) above H.STAB indicator, Part
Number BAC27EFS595 as given in 747-400 AMM 20-11-06-404-012 ALUMINUM FOIL
MARKER INSTALLATION. Refer to Figure 4.
9. Remove relay R7391 and rework wire bundle W0076 on Center Equipment Panel P54.
a. Group 1: Figure 13
b. Group 2: Figure 14
c. Group 3: Figure 18
d.  Group 4: Figure 20
10. Modify wire bundle W4606 on the Horizontal Stabilizer Refuel Valve Control Unit. Refer to Figure
2 for component location.
a.  Group 1: Figure 13
b. Group 2: Figure 14
c. Group 3: Figure 18
d. Group 4: Figure 20
11. Remove "HOR STAB XFER/JETT PUMP L" circuit breaker C03141 and "HOR STAB XFER/
JETT R" circuit breaker C03142. Remove HOR STAB XFER/JETT PUMP LEFT and RIGHT
placard as shown in Figure 5.
12. Modify wire bundle W2018 on AFT MISC Circuit Breaker Panel P85.
a.  Group 1: Figure 13
b.  Group 2: Figure 14
c. Group 3: Figure 18
d. Group 4: Figure 20
13. Modify wire bundles W4601 and W4602 on Left AFT Equipment Center E8. Cap and stow pump
wiring and plugs S1884 and S1885 as indicated
a.  Group 1: Figure 13
b. Group 2: Figure 14
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  37 of 139

### Page 38 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
c. Group 3: Figure 18
d. Group 4: Figure 20
14. Remove fuel transfer line and install plugs as shown in:
a. Group 1: Figure 12
b. Group 2: Figure 15
c. Group 3: Figure 19
d. Group 4: Figure 22
15. Change Horizontal Stabilizer Motor Impeller Assemblies as shown in Figure 6 and as follows:
a. Remove two motor impeller assemblies located on the front spar of HST. Refer to 747-400
AMM 28-17-04.
b. Install two plugs and two associated pins and do the following:
(1) Install new packing MS29513-007, lubricated with petrolatum, into groove on pin, part
number 835U0002-1.
(2) Put end of pin with packing into housing on top of unit.
(3) Install new packing M25988-1-238, lubricated with petrolatum into groove on plug, part
number 835U0001-1.
(4) Carefully push the plug into housing. Make sure that smallest hole is in line with pin on
housing.
(5) Put the bonding clips) with the bonding jumper(s) attached into position on the plug.
CAUTION: ENSURE SOCKET HEAD MOUNTING SCREWS ARE P/N MS24674-9 OR
EQUIVALENT ALTERNATIVE (THREAD LENGTH 15MM). QUANTITY (1)
WASHER P/N NAS1149DN832J MUST BE USED AT EACH SCREW
LOCATION.
(6) Install socket head screws and washers at five locations to fasten the bonding clips and
plug, part number 835U0001-1, to the pump housing.
Install nut, part number BACN10JC06C, and washer, part number NAS620C6 to the
threaded end on pin to secure pin in housing.
16. Modify the Remote Electronic Unit (REU) at M7861 in Equipment Center E8 as shown in Figure
7 and as follows:
a. Remove the "H.STAB INDIVIDUAL FUEL QUANTITY CHANNEL (IFQC) CARD", part
number 60B92018-207 in accordance with 747-400 AMM 28-41-17.
b. Install the cover plate on the REU, M7861 and tighten the four captive screws.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  38 of 139

### Page 39 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
C.  Placard REU "INOP".
d. Modify wire bundle W3851 on AFT Left Equipment Center E8.
(1) Group 1: Figure 13
(2) Group 2: Figure 14
(3) Group 3: Figure 18
(4) Group 4: Figure 20
17. Modify wire bundle W3890 and "reprogram FQIS card file for Horizontal Stabilizer absent", as
referenced in Figure 12.
a. Group 1: Figure 13
b. Group 2: Figure 14
c. Group 3: Figure 18
d. Group 4: Figure 20
NOTE: Reprogram FQIS card file for Horizontal Stabilizer absent
18. Change Fuel System Card File as follows:
a. Remove horizontal stabilizer Single Point Sensor Control Card (SPSC) A3, in accordance
with 747-400 AMM 28-17-10 and Figure 8.
b. Install cover assembly, part number 285U0096-6, at SPSC installation location. Refer to
Figure 8.
c. Modify wire bundle W4764 by inserting jumper wire in Fuel System Card File.
(1) Group 1: Figure 13
(2) Group 2: Figure 14
(3) Group 3: Figure 18
(4) Group 4: Figure 20
d. Modify wire bundle W4974 on shelf 6 of Main Right Equipment Center E2-6.
(1) Group 1: Figure 13
(2) Group 2: Figure 14
(3) Group 3: Figure 18
(4) Group 4: Figure 20
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  39 of 139

### Page 40 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
19. Change P5 Fuel Management Control Panel as follows:
a.  Remove the Fuel Management Control module (M00154) from the P5.
(1) Group 1: Figure 9
(2) Group 2: Figure 10
(3) Group 3: Figure 16
(4) Group 4: Figure 23
b.  Modify wire bundles W4751 and W4753 on Pilots Overhead Panel P5.
(1) Group 1: Figure 13
(2) Group 2: Figure 14
(3) Group 3: Figure 18
(4) Group 4: Figure 20
20. Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units (EIU) E2-6
WU modifications referred in Figure 11 and wire changes.
a. Group 1:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right EIUs as shown in Figure 13
b. Group 2:
(1) Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment
Center E2-6 for the left, center, and right ElUs as shown in Figure 14.
21. Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units (EIU) E2-6
WIU modifications referred in Figure 17 and wire changes.
Group 3:
a. Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment Center
E2-6 for the left, center, and right ElUs as shown in Figure 18.
22. Deactivate tail tank at WIU for the left, center, and right Electronic Instrument Units (EIU) E2-6
WIU modifications referred in Figure 21 and wire changes.
Group 4:
a. Modify wire bundle W4970, W4980, W4990 on shelf 6 of the Main Right Equipment Center
E2-6 for the left, center, and right ElUs as shown in Figure 20.
23. Close all circuit breakers that were opened in step 1 above.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  40 of 139

### Page 41 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. ALERONS, RUDDERS,
ELEVATORS, FLAPS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE EQUIPMENT.
24. Supply electrical power to airplane. Refer to the 747-400 AMM 24-22-00.
Horizontal Stabilizer Tank Functional Check
1. Group 1-3: Do the following steps to check the IDS program pin configuration:
NOTE: Only check the NON-X values shown in steps c, e, and g below. The "X" values in the
program pin codes shown below are not pertinent to this change and may be any value.
a. Display the configuration maintenance page on the CMC display unit.
b. Put the Captain's and First Officer's source select switches in the L position.
c. Make sure that the following is displayed:
IDS PROGRAM PINS:
1/XXXX XOXX/32
33/XXXX XX/56 1/P
d. Put the Captain's and First Officer's source select switches in the C position.
e. Make sure that the following is displayed:
IDS PROGRAM PINS:
1/XXXX XOXX/32
33/XXXX XX/56 1/P
f.  Put the Captain's and First Officer's source select switches in the R position.
g. Make sure that the following is displayed:
IDS PROGRAM PIN:
1/XXXX XOXX/32
33/XXXX XX/56 1/P
2.  Do an electrical test of the P42 panel as follows. The airplane must be in the ground mode for
this test:
a. Open these circuit breakers on the P6 panel:
CB NO.  LOC Nomenclature
C10123  D05  FUEL QTY 1
C10124  D06  FUEL QTY 2
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  41 of 139

### Page 42 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
b. Open these circuit breakers on the P414 panel:
CB NO.  LOC Nomenclature
C00090  F17  FUELING VALVE
C01142  F22  FUELING PWR
C10131  M33  HOR STAB SUMP DRAIN VLV
c. Open these circuit breakers on the P180-1 panel:
CB NO.  LOC  Nomenclature
C00086  M08  FUELING VALVE 2
C01143  M09  FUELING LTS - HOT
d. Open the P42 fueling panel door.
e. On the P42 panel, put the battery switch in the NORM position.
On the P414 panel, position F22, close the circuit breaker C01142, FUELING PWR.
g. On the P42 panel, push and hold the GAUGES TEST switch. See that all the fuel quantity
indicator displays read 888.8. The horizontal stabilizer indicator will remain blank.
h.  Release the GAUGES TEST switch.
Set the SELECT QTY value to 222.2.
j-  Press the PRESELECT SET QTY switch to the TOTAL position and hold for more than 2
seconds.
k.  Release the PRESELECT SET QTY switch.
See that the quantity 222.2 can be seen in the bottom display of the TOTAL FUEL indicator.
m. On the flight deck, push the FUEL synoptic EICAS display switch.
n. On the lower EICAS display, see that the fuel quantities are within +/- 200 Ibs (+/- 100 kgs)
of the quantities recorded in Step 6 of the Horizontal Stabilizer Tank Preparation Procedure.
NOTE: Horizontal Stabilizer tank fuel quantity will not be displayed.
o.  On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
p. On the P42 panel, see that the refuel indicator displays go blank.
q. On the P42 panel, put the battery switch in the BATT position.
r. On the P180-1 panel, position M09, close the circuit breaker C01143, FUELING PWR-HOT
BAT.
On the P42 panel, see that the refuel indicator quantities are within +/- 200 Ibs (+/- 100 kgs)
of the quantities recorded in Step 6 of the Horizontal Stabilizer Tank Preparation Procedure.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details  42 of 139

### Page 43 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
NOTE: Horizontal Stabilizer tank fuel quantity will not be displayed.
t.  On the P180-1 panel, position M09, open the circuit breaker C01143, FUELING PWR-HOT
BAT.
u. On the P42 panel, see that the refuel indicator displays go blank.
v. On the P42 panel, put the battery switch in the NORM position.
3. Do an electrical test of the FQIS display, center tank fuel control card, and secondary valves and
horizontal stabilizer sump drain valves as follows:
a. On the rear spar of the center tank, disconnect connector DV437 from the left secondary
refuel valve.
b. On the P42 panel, put the CENTER tank valve position control switch in the OPEN position.
c. On the P414 panel, position F22, close the circuit breaker C01142, FUELING PWR.
d.  On the rear spar of the center tank, make sure there is 23-30 VDC on DV437, between pins
A and B.
e.  On the P42 panel, push and hold the C. TANK SEC. VAL. switch to the CLOSED position.
See that the L and R valve position lights come on.
f.  On the rear spar of the center tank, make sure there is 0-3 VDC on DV437, between pins A
and B.
g.  On the rear spar of the center tank, disconnect the left secondary refuel valve pressure
switch connector DS1877. On the P42 panel, see that the secondary refuel valve L valve
position lights goes off.
h.  On the P42 panel, release the C. TANK SEC. VAL. switch.
On the P42 panel, put the CENTER tank valve position control switch in the CLOSED
position.
J-  On the P42 panel, put the ALL VALVES switch in the OPEN position.
k.  On the rear spar of the center tank, make sure there is 23-30 VDC on DV437, between pins
A and B.
On the P42 panel, put the ALL VALVES switch in the CLOSED position.
m.  On the rear spar of the center tank, make sure there is 0-3 VDC on DV437, between pins A
and B.
n.  On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
o. On the rear spar of the center tank, connect connectors DV437 and DS1877.
On the rear spar of the center tank, disconnect connector DV438 from the right secondary
refuel valve.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  43 of 139

### Page 44 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
q. On the P42 panel, put the CENTER tank valve position control switch in the OPEN position.
r. On the P414 panel, position F22, close the circuit breaker C01142, FUELING PWR.
s. On the rear spar of the center tank, make sure there is 23-30 VDC on DV438, between pins
A and B.
t.  On the P42 panel, push and hold the C. TANK SEC. VAL. switch to the CLOSED position.
See that the L and R valve position lights come on.
u. On the rear spar of the center tank, make sure there is 0-3 VDC on DV436, between pins A
and B.
v. On the rear spar of the center tank, disconnect the right secondary refuel valve pressure
switch connector DS1876. On the P42 panel, see that the secondary refuel valve R valve
position lights goes off.
w. On the P42 panel, release the C. TANK SEC. VAL. switch.
On the P42 panel, put the CENTER tank valve position control switch in the CLOSED
position.
y. On the P42 panel, put the ALL VALVES switch in the OPEN position.
z. On the rear spar of the center tank, make sure there is 23-30 VDC on DV438, between pins
A and B.
aa. On the P42 panel, put the ALL VALVES switch in the CLOSED position.
ab. On the rear spar of the center tank, make sure there is 0-3 VDC on DV438, between pins A
and B.
ac. On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
ad. On the rear spar of the center tank, connect connectors DV438 and DS1876.
ae. On the P414 panel, close the circuit breakers C090, FUELING VALVE, position F17 and
C10131, H/S SUMP DRAIN VALVE, position M33.
af. On the P211 panel, push the L VALVE (L3666) and R VALVE (L3667) valve power lights.
See that the lights come on when they are pushed.
ag. On the P211 panel, push the SUMP DRAIN MAINT switch to the open position. On the
horizontal stabilizer, hear that each solenoid valve operates. On the P211 panel, see that
the L VALVE and R VALVE valve power lights come on.
ah. On the P211 panel, push the SUMP DRAIN MAINT switch to CLOSED position.
ai.  On the P211 panel, push the SUMP DRAIN CONT switch to the L OPEN position. On the
horizontal stabilizer, hear that the left solenoid valve operates. On the P211 panel, see that
L VALVE valve power light comes on. Put the switch back to the normal position.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  44 of 139

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
aj. On the P211 panel, push the SUMP DRAIN CONT switch to the R OPEN position. On the
horizontal stabilizer, hear that the right solenoid valve operates. On the P211 panel, see that
the R VALVE valve power light comes on. Put the switch back to the normal position.
4. Do an electrical test of the fuel system management cards as follows:
a. On the CMC MCDU, go to the INPUT MONITORING screen.
b. On the P6 panel, close the circuit breaker C10128, FUEL SYS MGMT CARD A, position F5,
and open the circuit breaker C10127, FUEL SYS MGMT CARD B, position F7.
c. On the P414 panel, position F22, open the circuit breaker C01142, FUELING PWR.
d. On the P6 panel, close the circuit breaker C10129, FUEL SYS MGMT CH 1, position F6,
and open the circuit breaker C10130, FUEL SYS MGMT CH 2, position F8.
e. In the fuel system card file (M7852), on the A2 card, see that the CH 1 green LED is on and
the CH 2 green LED is not on.
f.  On the CMC MCDU, put this data in for input monitoring: port "E69," label "270" and sdi "00."
g.  In the fuel system card file (M7852), on the A2 card, push and hold the BIT switch to the CH
1 position. See that the CH 1 green LED goes off. On the CMC MCDU see that bit 27 goes
from "1" to "0" (main tank number 2 single point sensor). This can take up to 1 minute to
nappen.
h.  In the fuel system card file (M7853), on the A2 card, release the BIT switch.
i.  On the P6 panel, open the circuit breaker C10128, FUEL SYS MGMT CARD A, position F5,
open the circuit breaker C10130, FUEL SYS MGMT CH 2, position F8, open the circuit
breaker C10129, FUEL SYS MGMT CH 1, position F6, and open the circuit breaker C10127,
FUEL SYS MGMT CARD B, position F7.
J-  On the P180 panel, close the circuit breaker C10136, FUEL SYS EICAS INTFC CONT,
position H17.
k.  On the CMC MCDU, put this data in for input monitoring: port "E 10", label "274" and sdi "00."
See that this data can be seen. This can take up to 1 minute to happen.
(1) Group 1-3:
Position  29  28  27  26  25  24  23  22 21  • 20
Status  1  1  1  1  1
Position  19  • 18  17  16  15  14  13 12 | 11
Status  1  1  1
(2) Group 4:
Position  29 28 27 26 25 24 23 22|21 20
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  45 of 139

### Page 46 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
Status  1 1
Position  19  18  | 17  | 16  | 15  14  13  12  11
Status  0 1
On the CMC MCDU, put this data in for input monitoring: "E 10", label "270" and sdi "00."
m. On the P5 panel, push the MAIN 1 AFT fuel pump switch to ON. See that bit 11 goes from
"0" to "1." This can take up to 1 minute.
n. On the P5 panel, push the MAIN 1 FWD fuel pump switch to ON. See that bit 12 goes from
"0" to "1." This can take up to 1 minute to happen.
o. On the P5 panel, push the MAIN 2 AFT fuel pump switch to ON. See that bit 13 goes from
"O" to "1". This can take up to 1 minute to happen.
p. On the P5 panel, push the MAIN 2 FWD fuel pump switch to ON. See that bit 14 goes from
"O" to "1." This can take up to 1 minute.
q.  On the P5 panel, push the MAIN 3 AFT fuel pump switch to ON. See that bit 15 goes from
"0" to "1." This can take up to 1 minute.
r.  On the P5 panel, push the MAIN 3 FWD fuel pump switch to ON. See that bit 16 goes from
"O" to "1." This can take up to 1 minute.
S.  On the P5 panel, push the MAIN 4 AFT fuel pump switch to ON. See that bit 17 goes from
"0" to "1." This can take up to 1 minute.
t.  On the P5 panel, push the MAIN 4 FWD fuel pump switch to ON. See that bit 18 goes from
"O" to "1." This can take up to 1 minute.
On the P5 panel, push the CTR L fuel pump switch to ON. See that bit 19 goes from "0" to
"1." This can take up to 1 minute.
V. On the P5 panel, push the CTR R fuel pump switch to ON. See that bit 20 goes from "0" to
"1." This can take up to 1 minute.
W.  On the P5 panel, push the OVRD 2 MAIN AFT fuel pump switch to ON. See that bit 23 goes
from "0" to "1." This can take up to 1 minute.
x. On the P5 panel, push the OVRD 2 MAIN FWD fuel pump switch to ON. See that bit 24 goes
from "0" to "1." This can take up to 1 minute.
y-  On the P5 panel, push the OVRD 3 MAIN AFT fuel pump switch to ON. See that bit 25 goes
from "0" to "1." This can take up to 1 minute.
z. On the P5 panel, push the OVRD 3 MAIN FWD fuel pump switch to ON. See that bit 26 goes
from "0" to "1." This can take up to 1 minute.
aa. On the P5 panel, push the number 1 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 27 goes from "0" to "1." This can take up to 1 minute to happen.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  46 of 139

### Page 47 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
ab. On the P5 panel, push the number 2 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 28 goes from "O" to "1." This can take up to 1 minute to happen.
ac. On the P5 panel, push the number 3 tank FUEL X FEED switch to on (flow bar can be seen).
See that bit 29 goes from "0" to "1." This can take up to 1 minute to happen.
ad. On the CMC MCDU, put this data in for input monitoring: port "E 10", label "270" and sdi "10."
ae. On the P5 panel, push the number 4 tank FUEL X FEED switch to on (flow ban can be seen).
See that bit 11 goes from "0" to "1." This can take up to 1 minute.
af. On the P5 panel, push all the switches on the M154 module to off.
ag. On the P6 panel, close the circuit breakers C10128, FUEL SYS MGMT CARD A, position
F5, C10127, FUEL SYS MGMT CARD B, position F7, C10129, FUEL SYS MGMT CH 1,
position F6, and C10130, FUEL SYS MGMT CH 2, position F8.
5. Do the Fuel Quantity Indication System Ground test as specified in the 747-400 AMM 28-41-00.
NOTE: Horizontal Stabilizer is now deactivated and NOT to be fueled.
6. Do the Wing Surge Tank Float Switch Operational Test as specified in the 747-400 AMM
28-21-12.
7. Restore hydraulic power. Refer to the 747-400 AMM 29-11-00.
8. Remove the gear door locks. Refer to the 747-400 AMM 32-00-30.
9. Put the airplane back into serviceable condition.
Original Issue: November 17, 2006
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  47 of 139

### Page 48 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE
P7-2 PANEL
P7 OVERHEAD CIRCUIT BREAKER
PANEL
FWD
00000  •OC
FUEL XFR  • REFUEL
VALVE  & XFR
MAIN  BE BET MAN  STAB STAB H
2.5  25) 15
C83  C1080  C10125  C10126
1316895
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE
November 17, 2006  (SHEET 1 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  48 of 139

### Page 49 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
The step numbers shown below agree with the numbers The step numbers shown below agree with the
numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts
necessary for one airplane. Each reference drawing listed is a Module Parts List (MPL). The MPL lists all the
retrofit drawing and/or production drawings picture sheets to facilitate installation of the identified part, assembly
or installation.
STEP  TASK  NAME  PART NUMBER  QTY NOTES
1  Remove  Circuit Breaker  BACC18AD7  2
2  Install  Plug Button  2645  2
FIGURE 1: OVERHEAD CIRCUIT BREAKER PANEL P7-2 CHANGE
November 17, 2006  (SHEET 2 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  49 of 139

### Page 50 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION
REFUEL VALVE
CONTROL UNIT
FUEL TRANSFER
PUMPS
STABILIZER  FRONT SPAR  (DRY SIDE)  STABILIZEF
FRONT SPAR
REFUEL VALVE
FUEL
TRANSFER
AFT ISOLATION VALVE  PUMP
(IN HORIZONTAL
STABILIZER TANK)
STABILIZER  (WET SIDE)  1316897
REAR SPAR
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION
November 17, 2006  (SHEET 1 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  50 of 139

### Page 51 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
ACTUATOR FOR THE
AFT ISOLATION VALVE
(LEFT-UPPER)
VALVE
- ADAPTER
MANUAL OVERRIDE LEVER
(REF)
REAR SPAR
ACTUATOR FOR THE  (REF)
AFT ISOLATION VALVE
(RIGHT-LOWER)
VALVE
ADAPTER
MANUAL OVERRIDE
LEVER (REF)
1316899
FIGURE 2: HORIZONTAL STABILIZER TANK AFT FUEL TRANSFER SYSTEM LOCATION
November 17, 2006  (SHEET 2 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  51 of 139

### Page 52 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION
CENTER WING TANK
COMPONENTS
HORIZONTAL STABILIZER
FWD ISOLATION VALVES
CENTER
WING TANK
A  1316900
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION
November 17, 2006  (SHEET 1 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  52 of 139

### Page 53 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
VALVE BODY  REAR SPAR
VALVE  VALVE
ADAPTER  ACTUATOR
MANUAL
OVERRIDE LEVER
HORIZONTAL STABILIZER ISOLATION VALVE
1316901
FIGURE 3: HORIZONTAL STABILIZER TANK FWD FUEL TRANSFER SYSTEM LOCATION
November 17, 2006  (SHEET 2 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  53 of 139

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION
o0òé
FWD
H. STAB TANK
DEACTIVATED
4.0
4.0  3.5
RESERVE 3  H. STAB
OPEN
CLOSED
1316902
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION
November 17, 2006  (SHEET 1 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  54 of 139

### Page 55 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one airplane. Each reference drawing listed is a
Module Parts List (MPL). The MPL lists all the retrofit drawing and/or production drawings picture sheets to
facilitate installation of the identified part, assembly or installation.
STEP  TASK  NAME  PART NUMBER  QTY  NOTES
1  Install  Marker  BAC27EFS595  1  Refer to 747-400 AMM 20-11-06
FIGURE 4: LEFT WING REFUELING PANEL P42 MODIFICATION
November 17, 2006  (SHEET 2 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  55 of 139

### Page 56 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE
P85 PANEL
E8 EQUIPMENT RACK
DOOR NO. 5
20
SVCE OUT
-LAV WATER HTR  CARGO HDLG
_AFT R
FC1-FC2 | FC3-FC4 | FC5-FC6
• HOR STAB XFER/JETT PUMP
LEFT  RIGHT
THE BOEING CO
PART NUMBER
SERIAL NUMBER
1316905
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE
November 17, 2006  (SHEET 1 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  56 of 139

### Page 57 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one airplane. Each reference drawing listed is a
Module Parts List (MPL). The MPL lists all the retrofit drawing and/or production drawings picture sheets to
facilitate installation of the identified part, assembly or installation.
STEP  TASK  NAME  PART NUMBER  QTY NOTES
1  Remove  Circuit Breakers  BACC18AE25  2
2  Remove  Marker  BAC27EEL23764  1  Refer to 747-400 AMM 20-11-06.
Install  Plug Button  2645  2
FIGURE 5: H.STAB FUEL PUMP LOW PRESSURE SWITCHES AND P85 PANEL CHANGE
November 17, 2006  (SHEET 2 OF 2)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  57 of 139

### Page 58 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
FIGURE 6: HORIZONTAL STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE
TRANSFER/
JETTISON PUMP
STABILIZER
FRONT SPAR
PUMP HOUSING  MOTOR IMPELLER
ASSEMBLY
TRANSFER/JETTISON PUMP
1316906
FIGURE 6: HORIZONTAL STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE
November 17, 2006  (SHEET 1 OF 3)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  58 of 139

### Page 59 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
HST FRONT
• SPAR
ELECTRICAL
BOND SURFACE
© PACKING
TRANSFER/
JETTISON
PUMP HOUSING
ELECTRICAL
BOND SURFACE  PLUG
PIN
PACKING (4  (2) PLUG
PUMP HOUSING  6 7 WA  NASHER
ELECTRICAL
BOND SURFACE  BONDING
CLIP
MOUNTING BOLT
(AMM 28-17-05)  SOCKET HEAD SCREW AND
(DO NOT REMOVE)  WASHER (5 LOCATIONS)
HST FRONT -  BONDING JUMPER BUILD-UP
SPAR  (DO NOT DISASSEMBLE FROM
BONDING CLIP)
4 > PREPARE THE FAYING SURFACE OF THE TRANSFER/JETTISON PUMP HOUSING AND THE MATING
SURFACE OF THE PLUG FOR AN ELECTRICAL SURFACE BOND (SWPM 20-20-00).  1316907
FIGURE 6: HORIZONTAL STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE
November 17, 2006  (SHEET 2 OF 3)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  59 of 139

### Page 60 (OCR)

BOEING SERVICE BULLETIN 747-28-2295
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one airplane. Each reference drawing listed is a
Module Parts List (MPL). The MPL lists all the retrofit drawing and/or production drawings picture sheets to
facilitate installation of the identified part, assembly or installation.
STEP  TASK  NAME  PART NUMBER  QTY NOTES
Remove  Motor Impeller  60-72101-1 or 60-72102-4 (Boeing  2  Refer 747-400 AMM
1  Assembly  Part Number 60B92603-22 or  28-17-04. Keep
60B92603-26)  fasteners to install plug.
Install  Plug  835U0001-1  2  Use kept fasteners, if
2
usable (10 locations).
3  Install  Pin  835U0002-1  2
4  Install  Packing  MS29513-007  2
5  Install  Packing  M25988-1-238  2
6  Install  Nut  BACN10JC06C  2  Use with pin
7  Install  Washer  NAS620C6  Use with pin
FIGURE 6: HORIZONTAL STABILIZER TRANSFER PUMP MOTOR IMPELLER ASSY CHANGE
November 17, 2006  (SHEET 3 OF 3)
Revision 2: January 19, 2009  747-28-2295
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  60 of 139

The text continues at https://openairdocs.org/service-documents/boeing/sb-747-28-2295/file/896970f0b5c8.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
