# Boeing Service Bulletin 747-53-2307: U.S. DOT/FAA - Service Bulletin

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-0552; AD 2010-21-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 747-53-2307](https://openairdocs.org/service-documents/boeing/sb-747-53-2307.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 68
- PDF: https://openairdocs.org/files/sha256/07/66/07665fb75f66d502017c7df224f59846185e0333d2f4ddf8da129056dce3387c
- Page: https://openairdocs.org/service-documents/boeing/sb-747-53-2307/file/07665fb75f66

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 68
 
 
 
Commercial
Airplane
Group 747
Service Bulletin
Number: 747-53-2307
Date: December 21, 1989
Revision 3: April 16, 2009
ATA System: 5310 5331
SUBJECT: FUSELAGE - Skin - Upper Body Longitudinal Lap Joint (Stringers 23 and Above) 
Inspection and Repair
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 1989 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10, 
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or 
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document 
or otherwise.

### Page 2

BLANK PAGE
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
BLANK PAGE

### Page 3

Table of Contents
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
Table of Contents
Revision Transmittal Sheet .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  14
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  20
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  21
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  22
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  22
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  23
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  25
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   26
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  27
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  27
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  28
FIGURE  1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  32
FIGURE  2: EXTERNAL LAP JOINT CORROSION INSPECTION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
FIGURE  3: FLIGHT DECK LAP JOINT INTERNAL ACCESS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  48
FIGURE  4: UPPER DECK LAP JOINT INTERNAL ACCESS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  52
FIGURE  5: MAIN DECK LAP JOINT INTERNAL ACCESS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  54
FIGURE  6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR
LESS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  56
FIGURE  7: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.071 INCHES OR
LESS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  63

### Page 4

Table of Contents
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
BLANK PAGE

### Page 5

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 68
 
 
 
Commercial
Airplanes
747
Service Bulletin
Number: 747-53-2307 Revision Transmittal Sheet
Original Issue: December 21, 1989
Revision 3: April 16, 2009
ATA System: 5310 5331
SUBJECT: FUSELAGE - Skin - Upper Body Longitudinal Lap Joint (Stringers 23 and Above) 
Inspection and Repair
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
More work is necessary on airplanes changed as shown in Revision 2, Revision 1 or the original issue of this 
service bulletin.  On lap joints where the upper (overlapping) skin thickness at the upper row of fasteners is 0.071 
inches or less will be required to accomplish a structural modification as given Boeing Service Bulletin 747-
53A2463.  In addition, for airplanes with the optional protruding head fastener modification installed, the repeat 
inspection interval has been reduced from 3,000 flight-cycles to 1,000 flight-cycles.
REASON FOR REVISION
This revision is sent to add references to 747-53A2463 for a structural modification and post modification 
inspections for lap joint locations where the upper (overlapping) skin thickness at the upper row of fasteners is 
0.071 inches or less.  In addition, this revision is sent to change the repeat inspection interval from 3,000 flight-
cycles to 1,000 flight-cycles, for airplanes with the optional protruding head fastener modification installed.
Changes to this service bulletin include:
— Service Related Problem references are added to the summary section, Paragraph 1.C., Reason and 
Paragraph 1.J., References.
— Industry Support Information is added to the Summary sections and Paragraph 2.B.
— Paragraph 1.D., Description - Details to contact Boeing for structural modification information are added.
— New compliance information given in Boeing Service Bulletin 747-53A2463 Revision 1 is referred to in 
Paragraph 1.E., Compliance.
— Paragraph 1.H., Weight and Balance Changes - A statement regarding the structural modification is added.
— Paragraph 3.A., General Information - Dimensions, tolerances and substitutions notes are added.
— Paragraph 3.B., Work Instructions - Instructions to inspect repairs are added.  References to modifications 
as given in Service Bulletin 747-53A2463 are added.
— Notes are added throughout the service bulletin to inform operators that they should not use SRM 
53-30-03, Figure 18 or 27 for a lap joint repair as these repairs do not have adequate coverage of the lap 
joint area.
— Figure 1 and Figure 2 - Instructions to accomplish the structural modification as given in Boeing Service 
Bulletin 747-53A2463 are added.  Figure 2 has been changed to be consistent with the logic diagrams in 
Figure 1.
— Figure 3 - A station number in the illustration is corrected for the flight engineer’s section.
— Added references to FAA AD 94-12-09, Amendment 39-8937.

### Page 6

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
Paragraph 1.A., Effectivity, shows changes of airplane operators. Each operator should examine the Effectivity 
paragraph for changes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location 
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
Original Issue: December 21, 1989
Revision 1: August 27, 1992
Revision 2: October 14, 1993
Revision 3: April 16, 2009

### Page 7

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 68
 
 
 
Commercial
Airplanes
747
Service Bulletin
Number: 747-53-2307 Summary
Original Issue: December 21, 1989
Revision 3: April 16, 2009
ATA System: 5310 5331
SUBJECT: FUSELAGE - Skin - Upper Body Longitudinal Lap Joint (Stringers 23 and Above) 
Inspection and Repair
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Based on a structural review of the 747 airplane, accomplishment of the inspection program and incorporation 
of a select portion of the lap joint modification per this service bulletin is recommended on aging airplanes.
This inspection will detect corrosion and fatigue cracks in upper body skin longitudinal lap joints caused by 
disbonding of the cold bond at the joint. Continued operation of an airplane that has corrosion or fatigue cracking 
in lap joints could lead to separation of the skin at the lap joint causing rapid decompression of the airplane. 
Several operators have reported corrosion, and associated bulging of skin at upper body lap joints on airplanes 
with 26,733 to 70,000 flight-hours. One operator reported cracking and corrosion of the lap joint at Stringer 12 
from Station 1515 to 1735 and Stringer 4L at Station 1710 on an airplane with 35,134 flight-hours. One other 
operator reported corrosion and cracking at the lap joint at Stringer 4R, Station 1500 on an airplane with 49,024 
flight-hours. Another operator reported a one inch crack at Stringer 0, Station 738 suspected to have been 
caused by corrosion from disbonding at the cold bonded lap joint. There have been numerous additional 
instances of corrosion reported at the Stringer 23 lap joint. 
This bulletin supersedes that portion of Service Bulletin 747-53-2157 which addresses the upper body skin 
longitudinal lap joints. 
Airplanes previously inspected per Service Bulletin 747-53-2157 require additional inspection of lap joint areas 
as described herein. 
Any lap joint areas repaired per Service Bulletin 747-53-2157 do not require further repair but an After 
Modification Inspection is necessary at intervals given by Revision 1 of this bulletin. 
This bulletin does not supersede Service Bulletin 747-53-2253 or Service Bulletin 747-53A2303 which address 
the upper body skin longitudinal lap joints at Stringer 6 in Section 41.

### Page 8

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
Subsequent to previous releases of this service bulletin a review of all bulletins which recommend repeat 
inspections was performed to determine if the inspections were appropriate on aging airplanes. This review 
indicated that lap joints where the upper (overlapping) skin thickness is less than or equal to 0.071 inches should 
be modified at the times given in Service Bulletin 747-53A2463 on aging 747 airplanes, line numbers 1 through 
200.
Boeing Service Related Problem (SRP) 747OP-SRP-53-0292 is related to this service bulletin.
This item is identified in Boeing Structural Item Interim Advisory (SIIA) 747-71. 
Federal Aviation Administration (FAA) Airworthiness Directives 90-15-06, Amendment 39-6653 and 94-12-09, 
Amendment 39-8937 are related to this service bulletin. 
ACTION
As recommended by the 747 Structures Working Group, accomplish the inspection program per this service 
bulletin. In addition, do the selected portion of the lap joint modification that addresses lap joints fastened with 
deep countersink rivets. Incorporation thresholds for the inspection and modification are shown in the 
Description and Accomplishment Instructions
Do a detailed external visual inspection of the upper body longitudinal lap joints at Stringers 23 and above from 
Station 140 to 2360 (except Stringer 6 from Station 340 to 520) within 1,000 flight-cycles after receipt of the 
original release of this bulletin, or before 15,000 flight-cycles have accumulated, whichever comes later.   
Visually inspect all lap joints for evidence of corrosion or cracking and make any necessary repair prior to further 
flight as given in the Accomplishment Instructions. Repeat these visual inspections at intervals not to exceed 
1,000 flight-cycles for the lap joints in Sections 41, 42, and 46. Repeat the visual inspections at 2,000 flight-cycle 
intervals for the lap joints in Section 44. 
As an alternative to repeat inspections of Sections 41, 42, and 46 at 1,000 flight-cycle intervals, do an external 
high frequency eddy current (HFEC) inspection of selected lap joints together with the above initial visual 
inspection. Repeat the visual inspections at 2,000 flight-cycle intervals and the HFEC inspections in Section 41 
and 42 at 4,000 flight-cycle intervals and the HFEC inspections in Section 46 at 6,000 flight-cycle intervals. 
For airplanes with more than 15,000 flight-cycles, within 1000 flight cycles after receipt of this service bulletin, 
do a external HFEC inspection of selected lap joints together with the visual inspections. Repeat the visual 
inspections at 2000 flight-cycle intervals and the HFEC inspections at 4,000 flight-cycle intervals in Section 41 
and 42 and at 6,000 flight-cycle intervals in Section 46.
On aircraft with a main deck side cargo door, extended intervals for inspection are not permitted on selected 46-
section skin lap areas at Stringers 4-Left and 12-Left. Refer to the Accomplishment Instructions. 
On all the lap joints where the upper (overlapping) skin thickness is 0.071 inches or less, a structural 
modification is required at the time given in Service Bulletin 747-53A2463.
If the operator’s plan is to continue with this service bulletin, rather than per the instructions in Service Bulletin 
747-53A2463, based on the age of the airplane, refer to the Accomplishment Instructions for the Full or Optional 
Modification procedure. 
Do an After Modification Inspection of lap joint areas after the Full or Optional Modification. Refer to the 
Accomplishment Instructions for procedure and intervals for inspection. 
Corrosion inhibiting compound (BMS 3-23) is recommended to be applied internally to lap joint areas after Full 
or Optional Modification as given in the Accomplishment Instructions.

### Page 9

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
EFFECTIVITY
747-100, 200B and -200F series Airplanes. Refer to Paragraph 1.A.1 Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release another Airworthiness Directive related to this 
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service 
bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directives 90-15-06 and 94-12-09 are related to this 
service bulletin.
Boeing recommends a detailed visual inspection for all airplanes with less than 15,000 flight cycles within 1,000 
flight cycles after receipt of this service bulletin. Repeat detailed visual inspections at 1,000 flight cycle intervals 
on non-terminated lap joints in Sections 41, 42, and 46 and 2,000 flight cycles intervals for Section 44. This 
group of airplanes can elect to do the inspection for older airplanes per Method II to extend the inspection 
intervals.
Airplanes with 15,000 or more flight cycles must do a detailed visual inspection and a High Frequency Eddy 
Current (HFEC) inspection within 1,000 flight cycles after receipt of this service bulletin. Repeat detailed visual 
inspections at 2,000 flight cycle intervals on non-terminated lap joints in Sections 41, 42, 44 and 46. Repeat 
HFEC inspections at 4,000 flight cycle intervals on non-terminated lap joints in Sections 41, 42 and 6,000 flight 
cycle intervals for Section 46. Section 44 does not require a HFEC inspection.
Refer to Service Bulletin 747-53A2463 for new compliance information.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes, inspections, and/or repair procedures 
given in this service bulletin.
MANPOWER
MATERIAL INFORMATION
Boeing Supplied Kits *
* Kit is necessary only on airplanes with a main deck side cargo door. 
Refer to Paragraph 2.A., Material - Price and Availability.
Task Total Task Hours Elapsed Hours
External Visual Inspection 152 38
External HFEC Inspection 56 14
Internal Visual with LFEC Inspection 
(Main Deck Side Cargo Door Only)
88
Full or Optional Modification Refer to Paragraph 1.G., Manpower

### Page 10

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
S-14
S-6
S-0
S-23
S-19
(TYPICAL)
LAP JOINT
SECTION 46
S-4
S-12
1480
STA
2360
STA
41
42
44
LEFT SIDE OPPOSITE
RIGHT SIDE SHOWN
OF SKIN, AND MISSING OR DISTRESSED FASTENERS.
ACCOMPLISH A STRUCTURAL MODIFICATION ON ALL LAP JOINTS
WHERE THE UPPER (OVERLAPPING) SKIN THICKNESS IS 0.071
INCHES OR LESS AS GIVEN IN SERVICE BULLEIN 747-53A2463.
INSPECT LAP JOINTS FOR CORROSION, CRACKS OR PILLOWING
140
STA
520
STA
1000
STA
SECTIONS
1370319

### Page 11

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 68
 
 
 
Commercial
Airplanes
747
Service Bulletin
Number: 747-53-2307
Original Issue: December 21, 1989
Revision 3: April 16, 2009
ATA System: 5310 5331
SUBJECT: FUSELAGE - Skin - Upper Body Longitudinal Lap Joint (Stringers 23 and Above) 
Inspection and Repair
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below.
Refer to Service Bulletin Index Document D6-30300, Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data. 
Airplane models:
747-100 747-200B 747-200F
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AERO CONTROLS  (AEO)
1 RA722–RA723
AGES AIRCRAFT SALES & LEASING  (AGJ)
1 RB004
AIR GULF FALCON  (GFG)
1 RA535 RA537
GROUP CONFIGURATION DESCRIPTION
1 - 747-100 and -200B series airplanes, line 
numbers 1 through 200, with different skin 
thickness than airplanes in Group 3.
2 - 747-200F series airplane, line number 168.
3 - 747-100 series airplanes, line numbers 2 though 
161, with different skin thickness than airplanes 
in Group 1.

### Page 12

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
ALBARAKA  (AAB)
1R B 1 0 2
ARKIA ISRAELI AIRLINES  (ARK)
1R A 2 5 3
BANC OF AMERICA LEASING  (SBC)
1 RA106 RD001–RD002
EVERGREEN A/C SALES & LEASING  (EVG)
1R A 3 7 1
EVERGREEN INTERNATIONAL A/L  (EVR)
3 RA028 RA631 RA633
EXPORT RESTRICTED AIRPLANES  (YWV)
3 RA101–RA103 RA112 RA161–RA163
FINOVA  (GRB)
1R A 6 5 1
GE  (GEC)
1R A 0 1 6
GECAS  (GEF)
1 RA007 RA013 RA027
JOHNSON SPACE CENTER  (ZBR)
1R A 9 0 8
JUMBO JET LEASING  (JJL)
1 RA526 RA532–RA534 RA539
KABO AIR  (KAB)
1R A 3 0 5 R A 5 6 0
KALITTA AIR  (KAC)
3 RA401–RA402 RA524 RA635 RA913
LOGISTIC AIR, INC.  (LGA)
1R A 2 1 7
3R A 0 1 5 R A 9 1 0
NEA HOLDINGS, INC.  (NEA)
1R B 0 0 1
ORIENT THAI AIRLINES  (OTH)
1R A 5 4 0
UPS  (UPS)
3 RA026 RA029 RA033 RA902
RA912 RA915–RA916

### Page 13

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
WHIRLPOOL FINANCIAL CORP.  (ZZW)
1 RB005
IDENTIFICATION BY VARIABLE NUMBER
Variable  Group
RA001 1
RA002 3
RA003–RA005 1
RA006 3
RA007–RA010 1
RA011 3
RA012–RA014 1
RA015 3
RA016–RA025 1
RA026 3
RA027 1
RA028–RA030 3
RA031–RA032 1
RA033 3
RA034 1
RA101–RA103 3
RA104–RA110 1
RA111–RA112 3
RA113–RA115 1
RA161–RA163 3
RA164 1
RA201–RA203 1
RA216–RA217 1
RA245–RA246 1
RA251–RA259 1
RA301–RA312 1
RA351–RA360 1
RA369–RA373 1
RA401–RA405 3
RA406–RA414 1
RA501–RA502 1
RA521–RA523 1
RA524 3
RA525–RA527 1
RA532–RA540 1

### Page 14

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
As a result of the FAA-sponsored Aging Fleet Conference, a 747 Structures Working Group with 
Airline and Boeing members and FAA observers was formed to review structural service bulletin 
modifications and inspections and recommend selected service bulletins for incorporation on aging 
airplanes.   This inspection program and a select portion of the lap joint modification that addresses 
lap joints fastened with deep countersink rivets have been recommended for accomplishment on 
aging 747 airplanes.
RA551–RA552 1
RA559–RA561 1
RA581–RA582 1
RA585 1
RA601–RA602 1
RA631–RA635 3
RA651–RA652 1
RA671–RA677 1
RA701–RA702 1
RA721–RA724 1
RA741–RA743 1
RA761–RA762 1
RA781–RA782 1
RA901–RA902 3
RA903–RA909 1
RA910–RA916 3
RB001–RB005 1
RB041 3
RB042 1
RB043 3
RB044 1
RB071–RB075 1
RB101–RB102 1
RD001–RD002 1
RR201 2
Variable  Group

### Page 15

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
This inspection will detect corrosion or cracking in upper body skin longitudinal lap joints caused by 
disbonding of the cold bond at the lap joint. Continued operation of an airplane that has corrosion or 
cracking in lap joints could lead to separation of the skin at the lap joint causing rapid decompression 
of the airplane. 
Several operators have reported corrosion, and associated bulging of skin at upper body lap joints on 
airplanes with 26,733 to 70,000 flight-hours. 
One operator reported corrosion of one to three lap joint rivets and bulging of the skin at Stringer 12 
near Station 1694 on an airplane with 34,827 flight-hours. This operator also reported cracked and 
corroded fuselage skin with separation at the lap joint at Stringer 12 L and R at six locations each side 
from Station 1515 to 1735 and Stringer 4L at Station 1710 on the same airplane with 35,134 flight- 
hours. 
One other operator reported a corrosion bulge resulting in a skin lap crack at Stringer 4R, Station 1500 
on an airplane with 49,024 flight-hours and 13,594 flight-cycles. 
Another operator reported a one inch skin crack starting from the lap joint at Stringer 0 near Station 
738 on an airplane with 49,800 flight-hours which was suspected to have been caused by corrosion 
from disbonding at the cold bonded lap joint (Ref. SIIA 747-71). This operator also reported two 
airplanes with skin corrosion of lap joint at Stringer 4L. On one airplane, with 35,985 flight-hours, this 
corrosion was found at four locations between Stations 1482 and 1676. On the other airplane, 
corrosion was found near Stations 1510 and 1615 on an airplane with 36,461 flight-hours. 
Also, an operator has reported skin corrosion in the lap joint at Stringer 23R near Station 1400 on an 
airplane with 26,733 flight-hours and skin corrosion with bulging skin involving the lap joint at Stringer 
23L between Station 1720 and 1820 on another airplane. 
There have been numerous additional instances of corrosion reported at the Stringer 23 lap joint. 
This bulletin supersedes that portion of Service Bulletin 747-53-2157 which addresses the upper body 
skin longitudinal lap joints. 
Airplanes previously inspected per Service Bulletin 747-53-2157 require additional inspection of lap 
joint areas as described herein. 
Any lap joint areas repaired per Service Bulletin 747-53-2157 do not require further repair, but an After 
Modification Inspection is made necessary by Revision 1 of this bulletin. Refer to the Accomplishment 
Instructions of this bulletin for procedure and the time interval for inspection.   
This bulletin does not supersede Service Bulletin 747-53-2253 or Service Bulletin 747-53A2303 which 
address the upper body skin longitudinal lap joints at Stringer 6 in Section 41. 
Boeing Service Related Problem (SRP) 747OP-SRP-53-0292 is related to this service bulletin.
This item is identified in Boeing Structural Item Interim Advisory (SIIA) 747-71. 
Federal Aviation Administration (FAA) Airworthiness Directives 90-15-06, Amendment 39-6653 and 
94-12-09, Amendment 39-8937 are related to this service bulletin.

### Page 16

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
As a result of the FAA-sponsored Aging Fleet Conference, a 747 Structures Working Group with 
Airline and Boeing members and FAA observers was formed to review structural service bulletin 
modifications and inspections and recommend selected service bulletins for incorporation on aging 
airplanes. Based on a structural review of the 747 airplane, the Structures Working Group has 
determined that a select portion of the lap joint modification per this service bulletin, at or before the 
indicated threshold, should be accomplished to support the continued structural integrity of aging 747 
airplanes.
Subsequent to previous releases of this service bulletin a review of all bulletins which recommend 
repeat inspections was performed to determine if the inspections were appropriate on aging airplanes. 
This review indicated that lap joints where the upper (overlapping) skin thickness is less than or equal 
to 0.071 inches should be modified at the times given in Service Bulletin 747-53A2463 on aging 747 
airplanes, line numbers 1 through 200.
Revision 1 was sent to make these changes:
1. Add an After Modification Inspection that is necessary after Full or Optional Modification. 
2. Add instructions to change the terminating action for lap joints fastened with deep countersink 
fasteners at these locations:
a. Stringer 12 from STA 520 - 740 (Line Number 59 - 200 only).
b. Stringer 12 from STA 740 - 1000.
c. Stringer 19 from STA 520 - 740.
In these lap joints, the upper (overlapping) skin panel has a doubler hot bonded to the skin. 
The countersink depth of the rivet is greater than the basic skin gage. While this is not a 
problem for a skin panel with the hot bond intact, disbonding will result in a knife edge 
condition in the skin layer. This condition makes these lap joints more susceptible to fatigue 
cracking. Several operators have reported cracks at these lap joints. 
3. Add an Optional Modification for lap joints with outer skin panel thickness of 0.090 inches or less 
that do not have either cracks or corrosion. 
4. Add instruction to make necessary the HFEC inspection in Sections 41, 42, and 46 on airplanes 
with 15,000 or more flight-cycles. For these areas, the repeat HFEC inspection is necessary at 
4,000 flight-cycle intervals in Section 41 and 42 and at 6,000 flight-cycle intervals in Section 46.    
5. Add instruction to allow a minimum of 1.5 diameter edge margin for the skin lap joints at the top 
row of fastener holes on the inner skin panel for lap joints changed by the Full or Optional 
modification. 
6. Add instruction to permit the top row of fastener holes to be oversized by 1/64 inch diameter 
before HFEC inspection to decrease incorrect crack indication. 
7. Add instruction to recommend that corrosion inhibiting compound BMS 3-23 be applied internally 
to lap joints after terminating action (Full Modification). 
8. Add inspection, terminating action, and oversize fastener kit for airplanes with a main deck side 
cargo door to Figure 6.

### Page 17

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
9. Add reference to Aging Airplane Corrosion Prevention and Control Program D6-36022. 
10. Add Figure 6 to show outer skin panel thickness at skin lap joints of 0.090 inches or less. 
11. Add reference to Federal Aviation Administration (FAA) Airworthiness Directive 90-15-06, 
Amendment 39-6653. 
12. Remove references to protruding head fasteners from the Accomplishment Instructions and from 
Flagnote 3 of Figure 1. The type of fasteners necessary are given by the Structural Repair 
Manual.
13. Remove the lap joint shown in Figure 2 in Section 44 at stringer 23 from Body Station 1000 to 
1241. There is not a lap joint at this location. 
14. Change Flagnote 1 of Figure 2 to show that airplanes not listed in Flagnote 1 have fay-sealed lap 
joints at stringer 4 in Body Section 44.
15. Instruction to contact Boeing for jacking instructions is added. 
Revision 2 was sent to make the following changes:
1. Add a chart in Figure 2 to assist the operator to plan the initial inspection. The chart uses station 
and stringer locations to identify the areas of inspection. The chart also defines the alternative 
inspection to extend the repeat inspection threshold for airplanes with less than 15,000 flight 
cycles. In addition, the chart defines the only inspection recommended for airplanes with 15,000 
flight cycles or more.
2. Change to the illustrations showing the lap joint locations for Section 41. These illustrations have 
had the reference to Str 6 removed from the detail because service bulletins 747-53-2253 and 
747-53A2303 show inspections and repair at Str 6. The station callout for Str 0 is changed to 
reflect the correct starting point for the inspections. The tables showing the lap joint locations 
have also been revised to remove Str 6 information and to correct the starting point for Str 0.
3. Add a Compliance statement to the Summary information and to Section I, D in the service 
bulletin.
4. Remove redundant information in Figure 1 logic diagram for Inspection Method II.
5. Change the flight cycle threshold in Flag note 5 of Figure 1. The change brings the statement in 
accord with the 747 Aging Fleet Structures Working Group recommendation and the flight cycle 
threshold in the first paragraph of the Description.
Revision 3 is sent to add a structural modification and post modification inspections for lap joint 
locations where the upper (overlapping) skin thickness at the upper row of fasteners is 0.071 inches 
or less.  In addition, this revision is sent to change the repeat inspection interval from 3,000 flight-
cycles to 1,000 flight-cycles, for airplanes with the optional protruding head fastener modification 
installed.
Changes to this service bulletin include:
— Service Related Problem references are added to the summary section, Paragraph 1.C., Reason 
and Paragraph 1.J., References.
— Industry Support Information is added to the Summary sections and Paragraph 2.B.

### Page 18

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
— Paragraph 1.D., Description - Details to contact Boeing for structural modification information are 
added.
— New compliance information given in Boeing Service Bulletin 747-53A2463 Revision 1 is referred 
to in Paragraph 1.E., Compliance.
— Paragraph 1.H., Weight and Balance Changes - A statement regarding the structural modification 
is added.
— Paragraph 3.A., General Information - Dimensions, tolerances and substitutions notes are 
added.
— Paragraph 3.B., Work Instructions - Instructions to inspect repairs are added.  References to 
modifications as given in Service Bulletin 747-53A2463 are added.
— Notes are added throughout the service bulletin to inform operators that they should not use SRM 
53-30-03, Figure 18 or 27 for a lap joint repair as these repairs do not have adequate coverage 
of the lap joint area.
— Figure 1 and Figure 2 - Instructions to accomplish the structural modification as given in Boeing 
Service Bulletin 747-53A2463 are added.  Figure 2 has been changed to be consistent with the 
logic diagrams in Figure 1.
— Figure 3 - A station number in the illustration is corrected for the flight engineer’s section.
— Added references to FAA AD 94-12-09, Amendment 39-8937.
D. Description
Subsequent to previous releases of this service bulletin a review of all bulletins which recommend 
repeat inspections was performed to determine if the inspections were appropriate on aging airplanes. 
This review indicated that lap joints where the upper (overlapping) skin thickness is less than or equal 
to 0.071 inches should be modified at the times given in Service Bulletin 747-53A2463 on aging 747 
airplanes, line numbers 1 through 200.  Refer to Service Bulletin 747-53A2463 to determine whether 
to continue with the instructions in this service bulletin or with the instructions in Service Bulletin 747-
53A2463.
Based on a structural review of the 747 airplane, it is recommended that the inspection program be 
accomplished per this service bulletin. A select portion of the lap joint modification that addresses lap 
joints fastened with deep countersink rivets per the Accomplishment Instructions should be 
accomplished prior to, or upon accumulation of 20,000 flight cycles or within 1000 flight cycles after 
receipt of Revision 1 of this service bulletin, whichever is later.
Within 1,000 flight-cycles after receipt of this bulletin, a detailed external visual inspection is done at 
the upper body longitudinal lap joints at Stringers 23 and above from Station 140 to 2360 (except 
Stringer 6 from Station 340 to 520). A visual inspection is done at all lap joints for evidence of corrosion 
or cracking and any necessary repair is done as given in the Accomplishment Instructions prior to 
further flight. These visual inspections are repeated at intervals not to exceed 1,000 flight-cycles for 
the lap joints in Sections 41 (Station 140 - 520), 42 (Station 520 - 1000), and 46 (Station 1480 - 2360). 
Visual inspections are repeated at 2,000 flight-cycle intervals for the lap joints in Section 44 (Station 
1000 - 1480). 
As an alternative to repeat inspections of Sections 41, 42, and 46 at 1,000 flight-cycle intervals, 
external high frequency eddy current (HFEC) inspection can be done at selected lap joints together 
with the above initial visual inspection. The visual inspection is repeated at 2,000 flight-cycle intervals 
and the HFEC inspection in Section 41 and 42 at 4,000 flight-cycle intervals and the HFEC inspection 
in Section 46 at 6,000 flight-cycle intervals.

### Page 19

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
For airplanes with 15,000 flight-cycles or more, within 1000 flight cycles after receipt of this service 
bulletin, do an external HFEC inspection of selected lap joints together with the visual inspections. 
Repeat the visual inspections at 2000 flight cycle intervals and the HFEC inspections at 4,000 flight-
cycle intervals in Section 41 and 42 and at 6,000 flight-cycle intervals in Section 46.
On aircraft with a main deck side cargo door, extended intervals for inspection are not permitted on 
selected 46-section skin lap areas at Stringers 4-Left and 12-Left. Refer to the Accomplishment 
Instructions. 
In lieu of continued reinspections, terminating action can be done by a Full Modification or by an 
Optional Modification. The Full Modification is accomplished when an uncorroded lap joint area is 
separated between adjacent circumferential splices, adhesive removed, protective finish and faying 
surface sealant is applied, and joint is refastened per 747 Structural Repair Manual Subject 53-30-03. 
Terminating action in a corroded or cracked lap joint area may be accomplished when the area is 
repaired per 747 Structural Repair Manual Subject 53-30-03. For the Full Modification in Section 42 
only, repair of deep countersink fasteners at selected lap joints is made necessary by Revision 1 as 
given in the Accomplishment Instructions.
An Optional Modification is permitted at selected lap joint areas with outer skin panel thickness of 
0.090 inches or less that do not have either cracks or corrosion. For the Optional Modification, the 
countersunk fasteners are replaced in only the top row of the lap joint with 1/16 inch diameter oversize 
protruding head fasteners. Corrosion inhibiting compound (BMS 3-23) must be applied internally to 
lap joints after Optional Modification. An open hole HFEC inspection is necessary before fastener 
installation. This Optional Modification is not permitted at the lap joints with deep countersink fasteners 
located in Section 42.    
It is recommended that this service bulletin be accomplished concurrently with service bulletins 747-
53A2265, 747-53-2272, 747-53A2279, 747-53-2305, and 747-53A2463 due to common access. 
Airplanes modified per the initial release of this service bulletin do require more work. As a result of 
Rev 1, an after modification inspection will be required.
NOTE: For lap joints with an upper (overlapping) skin thickness equal to or less than 0.071 inches
blend out damage that is less than 10% of the original thickness. Repair damage greater than
10% of the original thickness per SRM 53-30-03 Fig. 19. If the damaged area is more than
the specified limits in SRM 53-30-03 Fig. 19, contact Boeing for repair instructions.
SEND TO:
BOEING COMMERCIAL AIRPLANE GROUP ATTENTION: 
MANAGER, AIRLINE SUPPORT
To define the repair for each lap joint, the structural condition of the adjacent skin, the location 
of the damage, the dimensions of the damage, and existing local repairs must be known. 
Because of these reasons, it is likely that unique repair drawings will be needed to define the 
terminating action for each airplane by Service Bulletin 747-53A2463.
Federal Aviation Administration (FAA) Airworthiness Directives 90-15-16, Amendment 39-6653 and 
94-12-09, Amendment 39-8937 are related to this service bulletin.
This service bulletin is listed in Boeing Document D6-35999.

### Page 20

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
Revision 3 - More work is necessary on airplanes changed as shown in Revision 2, Revision 1 or the 
original issue of this service bulletin.  On lap joints where the upper (overlapping) skin thickness at the 
upper row of fasteners is 0.071 inches or less will be required to accomplish a structural modification 
as given Boeing Service Bulletin 747-53A2463.  In addition, for airplanes with the optional protruding 
head fastener modification installed, the repeat inspection interval has been reduced from 3,000 flight-
cycles to 1,000 flight-cycles.
E. Compliance
The Federal Aviation Administration (FAA) will possibly release another Airworthiness Directive 
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times 
given in this service bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directives 90-15-06 and 94-12-09 are related to 
this service bulletin.
Boeing recommends a detailed visual inspection for all airplanes with less than 15,000 flight cycles 
within 1,000 flight cycles after receipt of this service bulletin. Repeat detailed visual inspections at 
1,000 flight cycle intervals on non-terminated lap joints in Sections 41, 42, and 46 and 2,000 flight 
cycles intervals for Section 44. This group of airplanes can elect to do the inspection for older airplanes 
per Method II to extend the inspection intervals.
Airplanes with 15,000 or more flight cycles must do a detailed visual inspection and a High Frequency 
Eddy Current (HFEC) inspection within 1,000 flight cycles after receipt of this service bulletin. Repeat 
detailed visual inspections at 2,000 flight cycle intervals on non-terminated lap joints in Sections 41, 
42, 44 and 46. Repeat HFEC inspections at 4,000 flight cycle intervals on non-terminated lap joints in 
Sections 41, 42 and 6,000 flight cycle intervals for Section 46. Section 44 does not require a HFEC 
inspection.
Longitudinal lap joints where the upper (overlapping) skin thickness at the upper row of fasteners is 
less than or equal to 0.071 inches will require accomplishment of a structural modification or a second 
modification, and post modification inspections at the times given in SB 747-53A2463 Revision 1 
"FUSELAGE - Skin - Longitudinal Lap Joints Inspection and Repair", Paragraph 1.E., Compliance, 
Table 3.
SB 747-53A2463 Revision 1 includes instructions for accomplishing the structural modification.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.

### Page 21

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
This service bulletin has been approved by the FAA.  In addition, the Manager of the FAA Seattle 
Aircraft Certification Office (ACO) approves the accomplishment of the applicable inspection, repair, 
and modification procedures of this service bulletin as an AMOC to the corresponding requirements 
of paragraph A., B., and F. of AD 90-15-06.  This AMOC only applies to the areas inspected as given 
in this service bulletin.  When this service bulletin specifies contacting Boeing for repair instructions, 
the repair instructions must be approved by the FAA in accordance with paragraph H. of the AD.  All 
provisions of AD 90-15-06 that are not specifically referenced in this paragraph remain fully applicable 
and must be complied with.
The Manager of the FAA Seattle ACO also approves the accomplishment of the applicable inspection, 
repair, and modification procedures of this service bulletin as an AMOC to the corresponding 
requirements of paragraphs (a), (b), (c), (e), (f) and (g) of AD 94-12-09.  This AMOC only applies to 
the areas inspected as given in this service bulletin.  When this service bulletin specifies contacting 
Boeing for repair instructions, the repair instructions must be approved by the FAA in accordance with 
paragraph (i) of the AD.  All provisions of AD 94-12-09 that are not specifically referenced in this 
paragraph remain fully applicable and must be complied with.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each 
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with 
operator task hour data if necessary. The estimate does not include lost time. These are some 
examples of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to inspect the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Task Number of Persons Task Hours Elapsed Hours
Visual Inspection of Lap 
Joints
4 152 38
Eddy Current Inspection of 
Lap Joints
45 6 1 4
TOTAL FOR EACH AIRPLANE 208 52
(a) Crew size, man hour and elapsed time shown does not include time for lap joint repair or 
access to accomplish such repair since it is dependent on the extent of repairs required. It is 
assumed that operators will not perform terminating action on all lap joint areas at one time. 
Therefore, crew size, man hours and elapsed time should be based on operator's experience 
and on the length and location of the lap joint for which terminating action is accomplished. 
Accomplishment of terminating action is estimated to be 96 man hours for each 200 inch length 
of uncracked and uncorroded lap joint.

### Page 22

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
The following breakdown of manpower requirements is suggested as a guide to assist operators in 
planning and accomplishing this modification on airplanes with Main Deck Side Cargo Door (MDSCD) 
Modification. This estimate is for direct labor performed by an experienced crew. It does not include 
setup, planning, familiarization, cure time, part fabrication, tool acquisition, or lost time. Factor this 
estimate as necessary based on your own experience. 
H. Weight and Balance Changes
Installation of lap joint repairs and modifications as outlined in Boeing Service Bulletin 747-53A2463 
"Fuselage - Skin - Longitudinal Lap Joints Inspection and Repair" will affect the weight and balance of 
the airplane. Determination of these changes is necessary, once the configuration of the lap joint 
repairs and modifications are defined.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Service Related Problem (SRP) 747OP-SRP-53-0292
b. 747 Maintenance Manual (AMM) Subject 25-11-01, 25-11-02, 25-11-03, 25-11-05, 25-14-
01, 25-19-00, 25-21-01, 25-21-02, 25-21-04, 25-21-12, 25-22-01, 25-22-03, 25-22-06, 25-
23-01, 25-23-04, 25-23-05, 25-24-00, 25-24-05, 25-24-11, 25-24-12, 25-24-19, 25-25-01, 
25-25-03, 25-25-04, 25-26-02, 25-26-03, 25-26-06, 25-27-00, 25-28-01, 25-28-15, 25-28-
23, 25-31-04, 25-40-01, 25-40-03, 25-59-01, 25-68-02, 31-00-00, 34-11-00, 35-00-00, 35-
21-00, 52-11-01, 52-13-01, 52-51-01, 53-21-01, 53-21-02 
c. 747 Structural Repair Manual (SRM) Subject 51-10-01, 53-30-03 
d. 747 Nondestructive Test (NDT) Manual D6-7170, Part 6, Subjects 51-00-00, 53-30-00, 53-
30-02, 53-30-03, 53-30-05, 53-30-09, and 53-30-19
e. 747 Structural Item Interim Advisory (SIIA) 747-71 
f. Boeing Service Bulletins 747-53-2157, "Body Longitudinal Skin Lap Joints, Tear Strap/Skin 
Lap Splices, Window Forgings, Skin Panel Doublers, And Selected Skin Panel Corrosion 
Inspection"; 747-53-2253, "Fuselage - Nose Section - Station 340 to 400 Stringer 6 Skin 
Inspection and Modification"; 747-53A2265, "Fuselage - Nose Section 41 - Body Frame 
Structure Inspections and Crack Repairs"; 747-53A2279, "Fuselage - Skin - Upper Body 
Skin Bonded Tear Strap Inspection and Modification"; 747-53A2303, "Fuselage - Nose 
Section - Station 400 to 520 Stringer 6 Skin Lap Splice Inspection Repair and Modification" 
747-53A2463 "Fuselage - Skin - Longitudinal Lap Joints Inspection and Repair"
Task Number of Persons Task Hours Elapsed Hours
Internal Visual Inspection 
and Low Frequency Eddy 
Current Inspection   
(MDSCD Mod)
188

### Page 23

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
g. FAA Airworthiness Directive (AD) 90-15-06, Amendment 39-6653 and 94-12-09, 
Amendment 39-8937.
h. Boeing Document D6-36022, "Aging Airplane Corrosion Prevention and 
Control Program, Model 747.
i. Boeing Document D6-35999, "Aging Airplane Service Bulletin Structural Modification 
Program, Model 747".
2. Data supplied with this Service Bulletin:
a. Drawings:
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
Drawing Number Title Sheet DCN ADCN
015U0566 Replacement Fastener Instl -
Lap Splice Rework,
Sta. 1656 to Sta. 2002
Str 4L and Str 12L - Top Kit
P/L (a) A -
1 (a) - -
2 (a) - -
(a) Drawings sent with Revision 1 of this service bulletin.
Publication Chapter-Section
747 Corrosion Prevention Manual 53-30-47

### Page 24

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
BLANK PAGE

### Page 25

December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary For Each Airplane as shown 
below. If there is a limit to the quantity (QTY) of available kits, a supply sequence is given by Spares. 
More kits become available as shown in the Reorder Lead Time (ROLT). ROLT is calculated from the 
date Boeing gets the purchase order.
Date: August 27, 1992
The kits are subject to the terms and conditions of Boeing's standard purchase order 
acknowledgment. The prices (and ROLT) are subject to acceptance within 180 days from the date 
shown above. After 180 days, new price (and ROLT) data is applicable. Prices are in United States 
Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow: 
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington   98124-2207  USA
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes, inspection, and/or repair 
procedures given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Kit Number Name
ROLT 
(Weeks) Unit Price
015U0566-1 Replacement Fastener Instl-Lap 
Splice Rework, Sta 1656 to Sta 
2002,   S-4L and S-12L, Top Kit
42 $5927.00

### Page 26

December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
2. Parts and Materials Supplied by the Operator:
None.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, 
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be 
necessary. Examine operator tool supply to make sure all necessary tools are available.
015U0566- Replacement Fastener Instl. - Lap Splice Rework, Sta 1656 to Sta 2002 Str 4L to Str 
12L - Top Kit
New Part Number
QTY
Name Notes-1
 015U0566 - Top Kit (a) (b) (c) (d)
(a) This kit is for airplanes with Main Deck Side Cargo Door Modification only. This kit contains 
fasteners to accomplish the full modification from Sta 1656 to Sta 2002 at Str 4L and Str 12L only.                                             
(b) See sheet PL of drawing 015U0566, supplied with this service bulletin, for kit contents.
(c) This kit has more parts than necessary for installation. Discard or save parts not used.
(d) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length 
longer than indicated. Also, if any fasteners part numbers listed are not available or have been 
superseded, substitute fasteners may be supplied in kits. Boeing Document D-590 and Boeing 
Drawing 012W6100 are used to determine the part numbers used as substitutes.

### Page 27

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. The following paragraphs outline the general accomplishment instructions. The 
suggested sequence of operations and detailed accomplishment instructions are 
indicated by circle notes on the figures. 
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Figure 1 contains the Logic Diagram presentations of the following general 
accomplishment instructions. 
4. Lap joints on cargo door are not required to be inspected or modified on aircraft with 
Main Deck Side Cargo Door.
5. As recommended by the 747 Aging Fleet Structures Working Group, accomplish the 
inspection program per this service bulletin. In addition, do the selected portion of the 
lap joint modification that addresses lap joints fastened with deep countersink rivets. 
Incorporation thresholds for the inspection and modification are shown in the Description 
and Accomplishment Instructions
6. To accomplish the Full or Optional Modification on lap joints where the upper 
(overlapping) skin panel thickness is 0.090 inches or less, a HFEC inspection on some 
fastener holes is required. Figure 6 identifies the locations where the upper 
(overlapping) skin panel thickness is 0.090 inches or less. Lap joints where the upper 
(overlapping) skin panel thickness is 0.071 inches or less require an after modification 
inspection. Figure 7 identifies the locations where the upper (overlapping) skin panel 
thickness is 0.071 inches or less. 
7. In some areas of the lap joints, a doubler is bonded to the upper (overlapping) skin 
panel. The skin panel thicknesses used in Figure 6 and Figure 7 do not include doublers. 
The thickness dimension used in Figure 6 and Figure 7 are for skin panels only. The 
modifications and after modification inspections are based on skin panel thickness only. 
8. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for 
definition of the acronyms.
9. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or 
minus 0.03 inch.
— Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
— Angular tolerance is plus or minus 2 degrees
— Hole dimensions for standard solid rivets are given in 747 SRM, Chapter 51

### Page 28

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
— Torque limits to tighten nuts and bolts are given in 747 SRM, Chapter 51.
10. For approved fastener and process material substitutions, refer to 747 SRM, Chapter 
51, Alternate fasteners are given in 747 SRM Chapter 51 and Boeing Drawing 
012W6100.
11. If the length of any fastener specified in this service bulletin does not meet the 
installation standards given in SRM Chapter 51, then a fastener of the same 
specification, or an approved substitute, with a length which meets the installation 
standards given in SRM Chapter 51 may be used.
B. WORK INSTRUCTIONS
1. For all lap joints affected by this bulletin as identified by Figure 2, perform inspection of the lap 
splices using Method I or II as outlined in the logic diagrams of Figure 1.
Method I: Visual Inspection only (Do not use for airplanes with more than 15,000 flight cycles) 
Within 1,000 flight-cycles after receipt of the original release of this bulletin, do a detailed visual 
inspection of the affected lap joints per Figure 2, circle notes 1 and 3. Repair any corrosion 
beyond limits or cracking as specified in Figure 2, circle note 3. Repeat the detailed visual 
inspection at intervals not to exceed 1,000 flight-cycles for the nonterminated lap joints in 
Sections 41, 42, and 46. Repeat the detailed visual inspection at intervals not to exceed 2,000 
flight-cycles in Section 44.
Method II: Visual and Eddy Current Inspection (Required for airplanes with 15,000 or more flight 
cycles, optional for airplanes with less than 15,000 flight cycles)
Within 1,000 flight-cycles after receipt of the original release of this bulletin, do a detailed visual 
inspection of the affected lap joints per Figure 2, circle notes 1 and 3. At the same time do an 
external high frequency eddy current (HFEC) inspection of selected lap joints as indicated in 
Figure 2, circle notes 2 and 3. Repair any corrosion beyond limits or cracking as specified in 
Figure 2, circle note 3. Repeat the detailed visual inspections at intervals not to exceed 2,000 
flight-cycles in Sections 41, 42, 44, and 46. Repeat the HFEC inspections at intervals not to 
exceed 4,000 flight-cycles for the nonterminated lap joints in Sections 41 and 42 and intervals 
not to exceed 6,000 flight-cycles for the nonterminated lap joints in Section 46. Eddy Current 
inspections are not required for lap joints in Section 44. 
On aircraft with a main deck side cargo door, do an internal low frequency eddy current (LFEC) 
inspection per 747 Non Destructive Test Manual D6-7170, Part 6, Subject 53-30-09 on selected 
46-section skin lap areas at Stringer 4-left and 12-left together with the above initial visual 
inspections.
2. In lieu of continued reinspections, modification of lap joint areas shown in Figure 2 is 
accomplished as follows:

### Page 29

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
NOTE:
1. At laps where the upper (overlapping) skin thickness is 0.071 inch or less, Boeing 
recommends that operators accomplish the structural modification as given in 
Boeing Service Bulletin 747-53A2463, "Fuselage - Skin - Longitudinal Lap Joints 
Inspection and Repair".  Refer to the compliance table in Paragraph 1.E. of Service 
Bulletin 747-53A2463 to determine whether to continue with the instructions in this 
service bulletin or to accomplish the modification given in Service Bulletin 747-
53A2463.
2. The optional modification should not be accomplished at lap joint locations where 
the upper (overlapping) skin thickness at the upper row of fasteners is 0.071 inches 
or less.
3. Do not use 747-100/200/300 SRM 53-30-03 Figure 18 or 27 when accomplishing 
a lap joint repair.  747-100/200/300 SRM 53-30-03 Figure 19 should be used for lap 
joint repairs.
4. Figure 7 shows the locations of all lap joints where the upper (overlapping) skin 
thickness at the upper row of fasteners is less than or equal to 0.071 inches.
a. Full modification in an uncorroded lap joint is accomplished when the lap joint is separated 
along an entire skin panel between adjacent circumferential splices, adhesive is removed, 
faying surface sealant is applied and the joint is refastened per 747 Structural Repair 
Manual Subject 53-30-03 Figure 9 or Figure 10 as applicable. This does not apply to deep 
countersink fastener locations. See following procedure for deep countersink fastener 
modification. 
b. Full modification in the area of deep countersink rivets, Str 12, Sta 520 to Sta 1000 and Str 
19, Sta 520 to Sta 740, must be accomplished by the following method. Separate the lap 
joint between adjacent circumferential splices and remove adhesive to inspect for corrosion 
or cracks. Do a HFEC open hole inspection of all fastener locations per 747 Non Destructive 
Test Manual D6-7170 Part 6, Subject 53-30-00 Figure 1,3 or 4. At rivet locations, drill to 
oversize dimension of 0.284-0.296. Apply fay surface sealant to the lap joint to fill the 
remaining countersink void, and install 9/32 protruding head fasteners in all three fastener 
rows in lap joint. All bolt locations in lap joint area are to be reworked per 747 Structural 
Repair Manual Subject 53-30-03, Fig. 10.
c. Full modification in a corroded lap joint is accomplished when a permanent repair of 
corroded lap joint area is conducted per 747 Structural Repair Manual Subject 53-30-03 
concurrently with full modification of the remaining part of the lap joint per step 3.a. If the 
amount of material removed exceeds 10 percent, trim the affected area and repair per SRM. 
At the same time inspect the body frame in the corroded area and repair any frame cracking 
per Structural Repair Manual Subject 51-40-03.
NOTE: Do not use 747-100/200/300 SRM 53-30-03 Figure 18 or 27 when accomplishing
a lap joint repair.  747-100/200/300 SRM 53-30-03 Figure 19 should be used for lap
joint repairs.

### Page 30

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
d. Modification in a lap joint that is both corrosion and crack free is accomplished by either the 
full modification per step 3.a. or an optional modification. The optional modification consists 
of replacing existing countersunk fasteners, in areas where the upper (overlapping) skin 
panel thickness is 0.090 or less, with 1/16 inch oversized protruding head fasteners in the 
lap joint upper fastener row without disturbing the rest of the lap joint.
e. Full modification of the lap joints around the Main Deck Side Cargo Door (MDSCD) 
modification can be accomplished by the following method. Remove the straps and doublers 
at Str 4, Sta 1660 to Sta 2000. Remove doublers from Str 12, Sta 1741 to Sta 1780, Sta 
1920 to Sta 1961. Full modification of the lap joints forward of Sta 1741 and aft of Sta 1961 
can be accomplished. After full modification of Str 4 and Str 12 in this area, reinstall straps 
and doublers using the special kit of oversize fasteners. Refer to drawing 015U0566, PL, Sh 
1 and Sh 2.
For both Full and Optional Modifications on lap joints where the upper (overlapping) skin panel 
thickness is 0.090 inches or less, a HFEC inspection of some fastener holes is required. Do an 
open hole HFEC inspection in the upper fastener row of lap joint per 747 Non Destructive Test 
Manual D6-7170 Part 6, 53-30-00 Figure 1, 3 or 4 for countersunk holes or 51-00-00 Figure 1 or 
11 for non countersunk holes to verify holes are crack free. For both full and optional 
modifications it is acceptable to oversize holes in upper fastener row by 1/64 inch to decrease 
incorrect crack indication. After inspection, enlarge holes again by 3/64 inch to permit installation 
of 1/4 inch protruding head fasteners. See Figure 6 for upper (overlapping) skin panels 0.090 
thickness or less. The HFEC inspection is not required on lap joints where the upper 
(overlapping) skin panel thickness is greater than 0.090 inches. 
Conduct both an internal and external detailed visual inspection for cracking and corrosion of the 
lap joint prior to the modification. Apply corrosion prevention compound BMS 3-23, at time of 
modification, to the lap joint externally under the wing to body fairing and internally at all lap joint 
areas. 
NOTE:
1. When accomplishing terminating action on a specific lap joint length, contact 
Boeing for jacking requirements (specify lap joint being reworked, details of 
airplane configuration including weight and CG, and any other work being 
performed concurrently on the airplane). Lap joint must be opened completely 
between circumferential splices. No partial lap joint rework is allowed.
2. To accomplish terminating action with either the full or optional modification, the 
standard 2 dia. edge margin requirement is changed to 1.5 dia minimum at the top 
row of fasteners on the inner skin panel of all lap joints.
3. Apply corrosion inhibiting compound (BMS 3-23 or equivalent) internally to all lap 
joint areas after terminating action is accomplished. Affected lap joints for which 
inspection or terminating action has been accomplished by previous release of this 
service bulletin do not require additional work for application of corrosion inhibiting 
compound. Application of corrosion inhibiting compound is mandatory for airplanes 
repaired by the optional modification. 
3. Restore airplane to normal configuration.
4. After modification reinspect as follows:

### Page 31

Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
a. External HFEC inspection for skin cracks at the upper fastener row of the lap joint (0.071 
and less upper (overlapping) skin thicknesses only) per 747 NDT, Part 6, 53-30-19 
(preferred) or 747 NDT, Part 6, 51-00-00 Figure 4. See Figure 7 for areas of the lap joints 
that require reinspection.
— at 10,000 flight cycles after full modification per Revision 1 or later revision;
— at 7000 flight cycles after optional modification;
— at 5000 flight cycles for Sec. 42 deep countersink fastener locations reworked per the 
original release of this service bulletin;
Repeat at 1,000 flight cycle intervals (applicable to all modification methods).
Post-modification inspections per this service bulletin at lap joints with upper (overlapping) 
skin thickness of 0.071 inch or less at the upper fastener row can be terminated after the 
structural modification given in Service Bulletin 747-53A2463 has been done.  Post-
modification inspection data for lap joints with upper (overlapping) skin thickness of 0.071 
inch or less at the upper fastener row will be included with the structural modification data 
given as part of the Service Bulletin 747-53A2463 requirements.
b. Detailed visual inspection for corrosion per Boeing Document D6-36022.
External at 5 year intervals
Internal at 8 year intervals with application of corrosion inhibiting compound.
c. If any corrosion or cracks are found, repair per 747 Structural Repair Manual Subject 
53-30-03, notify Boeing of the details of the discrepancy and continue inspection per steps 
4.a. and 4.b. above.
NOTE: Do not use 747-100/200/300 SRM 53-30-03 Figure 18 or 27 when accomplishing
a lap joint repair.  747-100/200/300 SRM 53-30-03 Figure 19 should be used for lap
joint repairs.
5. Inspect repairs as given in 747-100/200/300 SRM 53-30-03 or as given in the 747 Repair 
Assessment Guidelines document D6-36181.  For any external doubler repairs greater than 40 
inches in length (in the horizontal direction) do internal surface HFEC inspections every 3,000 
flight-cycles.

### Page 32

FIGURE 1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FIGURE  1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
INSPECTION METHOD I: VISUAL ONLY
(DO NOT USE FOR AIRPLANES WITH
15,000 OR MORE FLIGHT-CYCLES)
WITHIN 1,000 FLIGHT CYCLES
AFTER RECEIPT OF THIS BULLETIN
PERFORM THE FOLLOWING
CONDUCT A DETAILED EXTERNAL VISUAL
INSPECTION TO DETERMINE IF CORROSION
OR CRACKING EXISTS AT COLD-BONDED
LONGITUDINAL BODY SKIN LAP JOINTS AT S-23
AND ABOVE FROM STATION 140 TO 2360
(REF FIGURE 2)
AREAS OF CRACKS
OR CORROSION
NO CRACKS
OR CORROSION
CONDUCT HFEC INSPECTION FOR
CRACKS AT UPPER FASTENER ROW
OF LAP JOINT OVER COMPLETE
LENGTH OF LAP JOINT AS
INDICATED IN FIGURE 2
CONDUCT TERMINATING
ACTION ON AFFECTED
LAP JOINTS
DO POST
MODIFICATION
INSPECTION
(SKIN GAGE
0.071 OR LESS)
REPEAT VISUAL INSPECTION
OF ALL NONTERMINATED LAP
JOINTS IN SECTIONS 41,42
AND 46 AT 1,000 FLIGHT-
CYCLE INTERVALS AND SEC-
TION 44 AT 2,000 FLIGHT-
CYCLE INTERVALS
CORROSION BUT
NO CRACKS
CRACKS
DETERMINE AMOUNT OF MATERIAL
LOSS PER LFEC INSPECTION
METHOD IN 747 NDT D6-7170,
PART 6, 51-00-00, FIGURE 5
OR FIGURE 12
CONTINUED ON NEXT PAGE
51
2
3
A B C D
1370326
(SHEET 1 OF 6)

### Page 33

FIGURE 1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
AT 5,000 FLIGHT-CYCLES FOR
DEEP COUNTERSINK RIVETS
REWORKED PER ORIGINAL RELEASE
DO POST MODIFICATION
INSPECTION (SKIN GAGE
0.071 OR LESS)
CONDUCT TERMINATING ACTION
ON REMAINDER OF LAP JOINT
BETWEEN CIRCUMFERENTIAL
SPLICES WITHIN 15 MONTHS
DO POST MODIFICATION
INSPECTION (SKIN GAGE
0.071 OR LESS)
AT 7,000 FLIGHT-CYCLES 
AFTER OPTIONAL 
MODIFICATION
AT 10,000 FLIGHT-CYCLES
AFTER FULL MODIFICATION
EXTERNAL HFEC INSPECTIONS FOR 
CRACKS AT THE UPPER FASTENER
ROW OF THE LAP JOINT PER THE 
747 NDT MANUAL
MATERIAL LOSS
LESS THAN 10%
MATERIAL LOSS
GREATER THAN 10%
CONDUCT TERMINATING ACTION ON
30 MONTHS
CORRODED LAP JOINT BETWEEN
CIRCUMFERENTIAL SPLICES WITHIN
CORRODED JOINTS BETWEEN
INTERVALS
REPEAT INSPECTION OF
CIRCUMFERENTIAL SPLICES
AT 500 FLIGHT-CYCLE FLIGHT
CORROSION PER SRM
53-30-03 PRIOR TO
FURTHER PRESSURIZED
REPAIR ALL CRACKS OR
THEN WITHIN 1,000 FLIGHT-CYCLES 
FROM LAST EXTERNAL HFEC INSPECTION
C DBA
CONTINUED FROM PREVIOUS PAGE
4
3
3
6
1370333
(SHEET 2 OF 6)

### Page 34

FIGURE 1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
INSPECTION METHOD II:
VISUAL AND EDDY CURRENT INSPECTION
(REQUIRED FOR AIRPLANES WITH 15,000 OR MORE FLIGHT-CYCLES)
WITHIN 1,000 FLIGHT-CYCLES AFTER RECEIPT OF THIS
BULLETIN PERFORM THE FOLLOWING
CONDUCT A DETAILED EXTERNAL VISUAL INSPECTION TO DETERMINE
IF CORROSION OR CRACKING EXISTS AT COLD-BONDED LONGITUDINAL BODY
SKIN LAP JOINTS AT S-23 AND ABOVE FROM STATION 140 TO 2360
(REF FIGURE 2)
CONDUCT AN EXTERNAL HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
OF SELECTED LAP JOINTS IN SECTIONS 41, 42 AND 46 FOR SKIN CRACKING
AS INDICATED IN FIGURE 2
NO CRACKS
OR CORROSION
CONDUCT TERMINATING
ACTION ON AFFECTED
LAP JOINTS
DO POST
MODIFICATION
INSPECTION
(SKIN GAGE
0.071 OR LESS)
REPEAT VISUAL INSPECTION
OF ALL NONTERMINATED LAP
JOINTS IN SECTIONS 41,42,
44 AND 46 AT 2,000 FLIGHT
CYCLE INTERVALS; REPEAT
HFEC INSPECTIONS AT
4,000 FLIGHT-CYCLES FOR
SECTIONS 41 AND 42, 6,000
FLIGHT-CYCLES FOR SECTION
46
CRACKSCORROSION BUT
NO CRACKS
DETERMINE AMOUNT OF MATERIAL
LOSS PER LFEC INSPECTION
METHOD IN 747 NDT D6-7170,
PART 6, 51-00-00, FIGURE 5
OR FIGURE 12
1 5
2
3
A
CONTINUED ON NEXT PAGE
B C D
1370334
(SHEET 3 OF 6)

### Page 35

FIGURE 1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 35 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
The instruction numbers shown below agree with the numbers shown inside the flag symbols in FIGURE 1.
1. A "CYCLE" IS A FLIGHT CYCLE WITH CABIN PRESSURE DIFFERENTIAL GREATER THAN 2.0 PSID.
DO POST MODIFICATION
INSPECTION (SKIN GAGE
0.071 OR LESS)
DO POST MODIFICATION
INSPECTION (SKIN GAGE
0.071 OR LESS)
AT 10,000 FLIGHT-CYCLES
AFTER FULL MODIFICATION
AT 5,000 FLIGHT-CYCLES FOR
DEEP COUNTERSINK RIVETS
REWORKED PE RORIGINAL RELEASE
AT 7,000 FLIGHT-CYCLES 
AFTER OPTIONAL 
MODIFICATION
EXTERNAL HFEC INSPECTIONS FOR 
CRACKS AT THE UPPER FASTENER
ROW OF THE LAP JOINT PER THE 
747 NDT MANUAL
THEN WITHIN 1,000 FLIGHT-CYCLES 
FROM LAST EXTERNAL HFEC INSPECTION
MATERIAL LOSS
LESS THAN 10%
REPEAT INSPECTION OF
CORRODED JOINTS BETWEEN
CIRCUMFERENTIAL SPLICES
AT 500 FLIGHT-CYCLE
INTERVALS
CONDUCT TERMINATING ACTION ON
CORRODED LAP JOINT BETWEEN
CIRCUMFERENTIAL SPLICES WITHIN
30 MONTHS
MATERIAL LOSS
GREATER THAN 10%
REPAIR ALL CRACKS OR
CORROSION PER SRM
53-30-03 PRIOR TO
FURTHER PRESSURIZED
FLIGHT
CONDUCT TERMINATING ACTION
ON REMAINDER OF LAP JOINT
BETWEEN CIRCUMFERENTIAL
SPLICES WITHIN 15 MONTHS
4
3
3
6
A
CONTINUED FROM PREVIOUS PMAGE
B C D
1370338
(SHEET 4 OF 6)

### Page 36

FIGURE 1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 36 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
2. EXTERNALLY, EVIDENCE OF CORROSION IN CLUDES SKIN PILLOWING OR BULGES BETWEEN 
FASTENERS; WHITE POWDER PROTRUDING FROM LAP JOINT; LOOSE, MISSING OR 
DISTRESSED FASTENER HEADS; SKIN CRACKS; OR CORROSION THROUGH THE SKIN AS 
SHOWN IN NOTES 1 AND 2. SKIN PILLOWING IN EXCESS OF 0.010 INCH IS CONSIDERED 
EVIDENCE OF CORROSION. AS AN ALTERNATIVE TO MEASURING PILLOWING OF SKIN AND 
VISUAL INSPECTION FOR DISTRESSED FASTENERS, EDDY CURRENT INSPECTION PER 747 NON 
DESTRUCTIVE TEST MANUAL D6 7170, PART 6, 51-00-00, FIGURE 5 MAY BE USED TO MEASURE 
THE EXTENT OF MATERIAL LOSS IN THE LAP JOINT.
NOTE:
1. Distressed fasteners are evidenced by cracking of the fastener head, dishing of fastener 
head or excessive countersink depth. Refer to the ’Distressed Fastener Examples’ illustration 
at the end of this Figure.
2. Measuring of pillowing is accomplished by using a suitable straight edge and thickness gage. 
Minimum length of straight edge should be 4.50 inches. Refer to the ’Pillowing Example’ 
illustration at the end of this Figure.
3. TERMINATING ACTION HAS A CHOICE OF PROCEDURES.
FULL MODIFICATION:
FULL MODIFICATION CONSISTS OF OPENING THE LAP JOINT BETWEEN CIRCUMFERENTIAL 
SPLICES, REMOVING ADHESIVE, REPAIRING ALL CRACKS AND CORROSION, AND 
REASSEMBLING LAP JOINT PER SRM SUBJECT 53-30-03 FIG 9 AND 10. FULL MODIFICATION FOR 
DEEP COUNTERSINK FASTENER LOCATIONS AT STR 12 STA 520 - 1000 AND STR 19 STA 520 - 740 
CONSISTS OF OPENING THE LAP JOINT BETWEEN CIRCUMFERENTIAL SPLICES, REMOVING 
ADHESIVE, REPAIRING ALL CRACKS AND CORROSION, AND REASSEMBLING THE LAP JOINT 
WITH 9/32 INCH PROTRUDING HEAD FASTENERS IN ALL FASTENER LOCATIONS. THIS IS THE 
ONLY ACCEPTABLE MOD FOR DEEP COUNTERSINK FASTENERS AND GIVES THE OPERATOR 
FULL MOD STATUS ON POST MOD INSPECTION SCHEDULE.
OPTIONAL MODIFICATION:
OPTIONAL MODIFICATION CONSISTS OF REMOVING THE UPPER ROW OF FASTENERS AT A 
CORROSION FREE LAP JOINT, HFEC OPEN HOLE INSPECT FOR CRACKS IN REMOVED 
FASTENER LOCATIONS, AND INSTALLING 1/4 INCH PROTRUDING HEAD FASTENERS. THE 
OPTIONAL MODIFICATION IS NOT APPLICABLE TO DEEP COUNTERSINK FASTENER LOCATIONS.
NOTE:
1. Longitudinal lap joints where the upper (overlapping) skin thickness at the upper row of 
fasteners is less than or equal to 0.071 inches will require accomplishment of a structural 
modification or a second modification, and post modification inspections at the times given in 
SB 747-53A2463 Revision 1 "FUSELAGE - Skin - Longitudinal Lap Joints Inspection and 
Repair", Paragraph 1.E., Compliance.
2. The optional modification should not be accomplished at lap joint locations where the upper 
(overlapping) skin thickness at the upper row of fasteners is 0.071 inches or less.
3. Figure 7 shows the locations of all lap joints where the upper (overlapping) skin thickness at 
the upper row of fasteners is less than or equal to 0.071 inches.
(SHEET 5 OF 6)

### Page 37

FIGURE 1: EXTERNAL LAP JOINT INSPECTION LOGIC DIAGRAM
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 37 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
4. IN ADDITION, THERE MUST BE NO EVIDENCE OF MISSING FASTENER HEADS, SKIN CRACKS, OR 
CORROSION COMPLETELY THROUGH THE SKIN AND FOR SECTION 46, THE TEAR STRAPS MUST 
HAVE BEEN REWORKED BY TEMPORARY REPAIR OR TERMINATING ACTION PER SERVICE 
BULLETIN 747-53A2279 IN AREA ADJACENT TO CORROSION. CORRECT AS REQUIRED TO MEET 
THESE CONDITIONS. 
5. AS RECOMMENDED BY THE 747 AGING FLEET STRUCTURES WORKING GROUP, ACCOMPLISH 
THE INSPECTION PROGRAM AND A SELECT PORTION OF THE LAP JOINT MODIFICATION THAT 
ADDRESSES LAP JOINTS FASTENED WITH DEEP COUNTERSINK RIVETS PER THIS SERVICE 
BULLETIN PRIOR TO, OR UPON THE ACCUMULATION OF 20,000 FLIGHT CYCLES OR WITHIN 1000 
FLIGHT CYCLES AFTER RECEIPT OF REVISION 1 OF THIS SERVICE BULLETIN, WHICHEVER IS 
LATER.
6. DO NOT USE 747 STRUCTURAL REPAIR MANUAL SUBJECT 53-30-03 FIGURE 18 OR 27 WHEN 
ACCOMPLISHING A LAP JOINT REPAIR.
DISTRESSED FASTENER EXAMPLES
DISHING OF FASTENER HEAD
EXCESSIVE
COUNTERSUNK DEPTH
CRACKS AT
FASTENER SHANK
1370348
PILLOWING EXAMPLES
INBD
4.50
MIN
INNER SKIN AT JOINT
STRAIGHT EDGE
OUTER SKIN
AT JOINT
SKIN PILLOWING
DIMENSION
(PILLOWING SHOWN
EXAGGERATED FOR
CLARITY)
1370351
(SHEET 6 OF 6)

### Page 38

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FIGURE  2: EXTERNAL LAP JOINT CORROSION INSPECTION
ENTRY DOOR
NO. 1
A
A
INDICATES AREA OF VISUAL AND HIGH FREQUENCY
EDDY CURRENT (HFEC) INSPECTIONS.
SECTION 41
LEFT SIDE
S-19
S-23
S-14
S-0
STA
520
STA
287
STA
260
STA
220
STA
180
STA
140
STA
340
STA
400
1 2 3
1 2
1370356
(SHEET 1 OF 10)

### Page 39

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 39 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
UP
INBD
TYPICAL LAP JOINT
SECTION 41 STRINGER TYPICAL
SECTION 42, 44 AND 46
STRINGER TYPICAL
INNER SKIN
OUTER SKIN
SECTION A-A
31
2
1370362
(SHEET 2 OF 10)

### Page 40

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 40 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
ENTRY DOOR
NO. 1
A
A
INDICATES AREA OF VISUAL AND HIGH FREQUENCY
EDDY CURRENT (HFEC) INSPECTIONS.
SECTION 41
LEFT SIDE
CREW DOOR
S-19
S-23
S-14
S-0
STA
520
STA
287
STA
260
STA
220
STA
180
STA
140
STA
340
STA
400
1 2 3
1 2
1370395
(SHEET 3 OF 10)

### Page 41

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 41 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
S-23
S-19
S-12
S-6
S-0
S-23
S-19
S-12
S-6
S-0
WING BODY FAIRINGSENTRY DOOR NO. 2
FORWARD
CARGO
DOOR
RIGHT SIDE
SECTION 42
LEFT SIDE
SECTION 42
STA
520
STA
941
STA
1000
STA
520
STA
1000
STA
741
WING BODY FAIRINGS
ENTRY DOOR NO. 2
A
A
INDICATES AREA OF VISUAL AND HIGH
FREQUENCY EDDY CURRENT (HFEC)
INSPECTIONS.
1 2 3
1 2
1370402
(SHEET 4 OF 10)

### Page 42

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 42 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
S-23
S-19
S-12
S-4
ENTRY DOOR NO. 3
S-23
S-19
S-12
S-4
BL-0
STA
1000
STA
1241
STA
1480
ENTRY DOOR NO. 3
A
A
SECTION 44
APPLICABLE TO RA001-RA014, RA102, RA103 AND RA201 ONLY.
AIRPLANES NOT LISTED HAVE FAY-SEALED LAP JOINTS AND DO
NOT REQUIRE INSPECTION IN THESE AREAS.
INDICATES AREA OF VISUAL INSPECTION ONLY.
1
1
1
1 2
FWD
1
1370444
(SHEET 5 OF 10)

### Page 43

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 43 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
A
A
SECTION 46
AFT
CARGO
DOOR
STA
1961.1
STA
1480
STA
1741.1
ENTRY DOOR NO. 4
S-23
S-19
S-12
S-4
S-4
S-12
S-19
S-23
ENTRY DOOR NO. 4
WING/BODY
FAIRINGS
WING/BODY
FAIRINGS
SEE FIGURE 6 FOR
AIRPLANES WITH
MAIN DECK SIDE
CARGO DOOR.
INDICATES AREA OF VISUAL AND HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTIONS.
1 2 3
1 2
1370885
(SHEET 6 OF 10)

### Page 44

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 44 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
A
A
SECTION 46
INDICATES AREA OF VISUAL AND HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTIONS.
S-23
S-19
S-12
S-4
S-4
S-12
S-19
S-23
BL-0
ENTRY DOOR NO. 5
ENTRY DOOR NO. 5STA
1961.1
STA
2181.1
STA
2360
BULK
CARGO
DOOR
1 2
1 2 3
1370886
(SHEET 7 OF 10)

### Page 45

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 45 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
INITIAL PLANNING REFERENCE CHART
AREA OF INITIAL INSPECTION - VISUAL ONLY
1000 F/C THRESHOLD - REPEAT 1000 F/C INTERVALS
STR BODY STATION AREA
0 Sta 287 to Sta 941
4 L & R Sta 1480 to Sta 2360
6 L & R Sta 520 to Sta 1000
12 L & R Sta 520 to Sta 1000 - Sta 1480 to Sta 2360
14 L & R Sta 140 to Sta 520
19 L & R Sta 140 to Sta 1000 - Sta 1480 to Sta 2360
23 L & R Sta 140 to Sta 1000 - Sta 1480 to Sta 2360
AREA OF INITIAL INSPECTION - VISUAL ONLY
1000 F/C THRESHOLD - REPEAT 2000 F/C INTERVALS HFEC 
STR BODY STATION AREA
4 L & R Sta 1000 to Sta 1480            See F/N  1
12 L & R Sta 1000 to Sta 1480
19 L & R Sta 1000 to Sta 1480
23 L & R Sta 1000 to Sta 1480
AREA OF INITIAL INSPECTION - VISUAL AND HFEC
1000 F/C THRESHOLD - REPEAT 2000 F/C INTERVALS VISUAL AND 
4000 F/C INTERVALS HFEC
STR BODY STATION AREA
0 Sta 287 to Sta 941
6 L & R Sta 520 to Sta 1000
12 L & R Sta 520 to Sta 1000
14 L & R Sta 140 to Sta 520
19 L & R Sta 140 to Sta 1000
23 L & R Sta 140 to Sta 1000
AREA OF INITIAL INSPECTION - VISUAL AND HFEC
1000 F/C THRESHOLD - REPEAT 2000 F/C INTERVALS VISUAL AND 
6000 F/C INTERVALS HFEC
STR BODY STATION AREA
4 L & R Sta 1480 to Sta 2360
12 L & R Sta 1480 to Sta 2360
19 L & R Sta 1480 to Sta 2360
23 L & R Sta 1480 to Sta 2360
(SHEET 8 OF 10)

### Page 46

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
The instruction numbers shown below agree with the numbers shown inside the circle symbols in FIGURE 2.
1. Perform an external detailed inspection to determine if corrosion or cracking exists at cold bonded 
longitudinal body skin lap joints. If evidence of corrosion or cracking is detected during the visual inspection, 
conduct a high frequency eddy current (HFEC) inspection (Ref. 747 Non-Destructive Test Manual D6-
7170, Part 6, Subject 53-30-02, 53-30-03, 53-30-05) for cracks in the skin at the upper row of fasteners in 
the lap joint over the entire length of the corroded or cracked skin panel.
NOTE:
1. In lieu of visual inspection, non destructive test method for corrosion detection per 747 Non-
Destructive Manual D6-7170, Part 6, Subject 51-00-00, Figure 5 or Figure 12 may be used.
2. Externally, evidence of corrosion includes skin pillowing or bulges between fasteners; white 
powder protruding from the lap joint; loose, missing or distressed fastener heads; skin cracks; 
or corrosion through the skin. 
3. Skin pillowing in excess of 0.010 inch is considered evidence of corrosion. As an alternative 
to measuring pillowing of skin and visual inspection for distressed fasteners, eddy current 
inspect (Ref. 747 Boeing Non-Destructive Test Manual D6-7170, Part 6, Subject 51-00-00, 
Figure 5 or Figure 12) to measure the extent of material loss in the lap joint.    
2. Perform a high frequency eddy current (HFEC) inspection (Ref. 747 Non-Destructive Manual D6-7170, 
Part 6, Subject 53-30-02, 53-30-03, 53-30-05) to determine if cracking exists in the outer skin of the lap 
splice at the upper fastener row (leftmost row at the Stringer 0 lap joint). Repair any cracking found per 747 
Structural Repair Manual Subject 53-30-03 prior to further pressurized flight.
3. Perform the following applicable actions: 
NOTE:
1. Longitudinal lap joints where the upper (overlapping) skin thickness at the upper row of 
fasteners is less than or equal to 0.071 inches will require accomplishment of a structural 
modification or a second modification, and post modification inspections at the times given in 
SB 747-53A2463 Revision 1 "FUSELAGE - Skin - Longitudinal Lap Joints Inspection and 
Repair", Paragraph 1.E., Compliance.
2. Do not use 747 Structural Repair Manual Subject 53-30-03 Figures 18 and 27 when 
accomplishing a lap joint repair.
3. Figure 7 shows the locations of all lap joints where the upper (overlapping) skin thickness at 
the upper row of fasteners is less than or equal to 0.071 inches.
A. For lap joint areas with cracking or corrosion completely through the skin, repair per 747 Structural 
Repair Manual Subject 53-30-03 prior to further pressurized flight.
B. For missing or distressed fasteners, replace fastener per 747 Structural Repair Manual Subject 53-
30-03, Figure 9 or 10, prior to next pressurized flight, except at deep countersink fastener locations. 
C. For lap joint areas with skin bulging or pillowing in excess of 0.010 inch, repair per 747 Structural 
Repair Manual Subject 53-30-03 unless the following three conditions have been met:
(SHEET 9 OF 10)

### Page 47

FIGURE 2: EXTERNAL LAP JOINT CORROSION INSPECTION
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
1. Inspection per 747 Non-Destructive Test Manual D6-7170, Part 6, Subject 51-00-00, Figure 5 or 
Figure 12 indicates that material loss does not exceed 10 percent. 
2. No evidence of skin cracks or corrosion completely through the skin is found. 
3. For Section 46, tear straps have been reworked by temporary repair or terminating action per 
Service Bulletin 747-53A2279 in adjacent area. 
NOTE: Adjacent area refers to the area bounded by the 3 stringer bays above and below the
applicable lap joint and the closest tear strap forward and aft of the corroded area.
Where corrosion is within 5 inches of a frame, the next distant tear strap from and not
the tear strap closest to that frame determines that boundary. 
D. For lap joint areas where measured material loss does not exceed 10 percent, reinspect per this 
service bulletin at 500 flight-cycles as specified in the procedure (Method I or II) being used. 
Terminating action must be performed on corroded lap joint (from forward circumferential splice to aft 
circumferential splice) within 30 months of being found. 
E. For lap joint areas where material loss is greater than 10 percent, repair per 747 Structural Repair 
Manual Subject 53-30-03 prior to next pressurized flight. 
F. For any lap splice which is required to be repaired per 747 Structural Repair Manual Subject 53-30-
03, terminating action must be performed on the remaining unrepaired length of the skin panel (from 
forward circumferential splice to aft circumferential splice of repaired skin panel) within 15 months of 
the repair. If existing repairs are found during the initial visual inspection of this bulletin, terminating 
action must be accomplished on the remaining unrepaired length of the skin panel within 15 months 
of being found.
NOTE: Terminating action may still require further actions as given in Service Bulletin 747-53A2463.
G. Inspect repairs as given in 747-100/200/300 SRM 53-30-03 or as given in the 747 Repair Assessment 
Guidelines document D6-36181.  For any external doubler repairs greater than 40 inches in length (in 
the horizontal direction) do internal surface HFEC inspections every 3,000 flight-cycles.
(SHEET 10 OF 10)

### Page 48

FIGURE 3: FLIGHT DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 48 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FIGURE  3: FLIGHT DECK LAP JOINT INTERNAL ACCESS
FLIGHT
ENGINEER'S
STATION
STA
394
STA
STA
STA
STA
332
260
340
520
LAVATORY
AREA
PILOTS'
STATION
OBSERVERS'
STATION
STOWAGE
AREA
UPPER DECK
TYPICAL FLIGHT DECK INSTALLATION
ALL AFFECTED CONFIGURATIONS SIMILAR
P5, P7, P12,
(AND P126)
OVERHEAD PANELS
1
2
3 5
UP
FWD
1370852
(SHEET 1 OF 4)

### Page 49

FIGURE 3: FLIGHT DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 49 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FWD
UP
6
330
300
STA
STA
1370856
(SHEET 2 OF 4)

### Page 50

FIGURE 3: FLIGHT DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 50 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
The instruction numbers shown below agree with the numbers shown inside the circle symbols in Figure 3.
1. Remove the flight engineer's seat per 747 Maintenance Manual Subject 25-11-02 or operator's comparable 
procedure. Remove the observer's seat per 747 Maintenance Manual Subject 25-11-03 or operator's 
comparable procedure. Remove the crew seat per 747 Maintenance Manual Subject 25-11- 05 or 
operator's comparable procedure. 
UP
FWD
6
390
STA
300
STA
1370859
(SHEET 3 OF 4)

### Page 51

FIGURE 3: FLIGHT DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 51 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
2. Remove the pilot's seats per 747 Maintenance Manual Subject 25-11-01, or operator's comparable 
procedure. 
3. Remove the pilots' overhead panel P5 and circuit breaker panels P7, P12 (and P126 if installed). Reference 
747 Maintenance Manual Subject 31-00-00.
4. Not shown - Cover pedestal, panels, racks, and all wire bundle connectors with plastic sheets to help 
prevent contamination or damage of equipment. 
5. Remove and salvage disconnect panels behind the pilots' overhead panel P5 and circuit breaker panels 
P7 and P12. Disconnect wire bundles as required to enable disconnect panels to be moved clear of 
modification area for dripshield removal. 
NOTE: Prior to disconnecting any wire bundles from disconnect panels, removing any wire bundles from
wire bundle clamps or disconnecting any separate ground wires, ensure that all wire bundles and
separate wires are identified and suitably marked for reinstallation. 
6. Remove and salvage the overhead sidewall linings, moldings, dripshields, and insulation in flight deck area 
per 747 Maintenance Manual Subject 25-14-01 or operator's comparable procedure. 
7. Not shown - Loosen and deflect any installed pitot static tubing as required in modification areas per 747 
Maintenance Manual Subject 34-11-00 or operator's comparable procedure. 
8. Not shown - Loosen and deflect, or remove any oxygen tubing in modification areas, as required per 747 
Maintenance Manual Subject 35-00-00 or operator's comparable procedure. 
9. Not shown - Remove crew escape hatch per 747 Maintenance Manual Subject 53-21-01 or operator's 
comparable procedure.
(SHEET 4 OF 4)

### Page 52

FIGURE 4: UPPER DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 52 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FIGURE  4: UPPER DECK LAP JOINT INTERNAL ACCESS
The instruction numbers shown below agree with the numbers shown inside the circle symbols in FIGURE 4.
1
AFT PARTITION
FLIGHT COMPARTMENT
FLIGHT COMPARTMENT DOOR
E11 RACK ENCLOSURE
PARTITION
RIGHT CREW DOOR
LEFT CREW DOOR
(IF INSTALLED)
FLOOR MOUNTED
ESCAPE SLIDE
(TYPICAL) FORWARD LEFTPARTITION
CENTER LIGHTED REVEAL
UPPER CLOSURE PANEL
TYPICAL UPPER DECK CONFIGURATION
WITH LEFT AND RIGHT CREW DOOR
(OTHER UPPER DECK CONFIGURATIONS SIMILAR)
WINDOW REVEAL
PSU PANEL
LOWER CLOSURE PANEL
STOWAGE BIN
1370861
(SHEET 1 OF 2)

### Page 53

FIGURE 4: UPPER DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 53 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
1. Remove and salvage equipment and furnishings as required to gain access to STA 420 through STA 520 
lap joints. Refer to the following maintenance manual subjects for removal procedure.
2. Not shown - Install all items which are removed in the preceding step per the applicable maintenance 
manual subject or operator's comparable procedure.
Equipment Maintenance 
Manual Subject
Window Reveal 25-21-02
Sidewall and Ceiling Insulation 25-21-04 
Ceiling Panels 25-22-03
Passenger Service Units   25-23-01
Forward Closets   25-24-00 
Forward Right Partition 25-24-11
Forward Left Partition 25-24-12
Crew Rest Area   25-24-19
Passenger Seats   25-25-01
Wall Mounted Attendant Seat 25-25-04 
Stairway Forward Right Partition 25-26-02
Stair Aft Right Partition 25-26-03
Stairway Forward Left Partition 25-26-06 
Sidewall Stowage Units 25-28-15
Overhead Stowage Bins 25-28-23
Lavatories 25-40-03 
Floor Mounted Escape Slide 25-68-02
Crew Entry Door 52-13-01 
Flight Compartment Door 52-51-01 
(SHEET 2 OF 2)

### Page 54

FIGURE 5: MAIN DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 54 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FIGURE  5: MAIN DECK LAP JOINT INTERNAL ACCESS
The instruction numbers shown below agree with the numbers shown inside the circle symbols in FIGURE 5.
CAUTION: TO PREVENT DAMAGE TO FLOOR PANELS, IT IS RECOMMENDED THAT A 1/2 INCH THICK,
1 FOOT SQUARE PLYWOOD BEARING PAD BE USED UNDER EACH LEG OF LADDERS,
CEILING
ATTENDANT SERVICE
PANEL
PANEL
DOOR ONE
MAIN ENTRY
SERVICE UNIT
PASSENGER
PANEL
ATTENDANT
LINING PANEL
SIDEWALL
STOWAGE BIN
OVERHEAD
(OTHER MAIN DECK CONFIGURATIONS SIMILAR)
TYPICAL MAIN DECK CONFIGURATION
1
1370864
(SHEET 1 OF 2)

### Page 55

FIGURE 5: MAIN DECK LAP JOINT INTERNAL ACCESS
December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 55 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
STANDS OR SCAFFOLDS. ADDITIONALLY, IT IS ALSO RECOMMENDED THAT ONLY ONE
PERSON BE ALLOWED TO USE EACH LADDER, STAND OR SCAFFOLD.
1. Remove and salvage equipment and furnishings as required to gain access to STA 140 through STA 2360 
lap joints. Refer to the following maintenance manual subjects for removal procedure. 
2. Not shown - Install all items which are removed in the preceding step per the applicable maintenance 
manual subject or operator's comparable procedure. 
Equipment Maintenance 
Manual Subject
Sidewall Lining Panels 25-21-01/-02 
Sidewall and Ceiling Insulation 25-21-04 
Sidewall Dado Panels  25-21-12 
Ceiling Panels 25-22-01/-03 
Entryway Ceiling Panels 25-22-06 
Passenger Service Units 25-23-01 
Attendant Service Unit 25-23-04 
Forward Closets 25-24-00 
Partitions 25-24-05 
Passenger Seats 25-25-01
Track Mounted Attendant Seats 25-25-03
Wall Mounted Attendant Seats 25-25-04 
Floor Covering 25-27-00 
Insulation Blankets 25-28-01 
Overhead Stowage Bins 25-28-23
Sidewall Galleys   25-31-04
Sidewall Lavatories 25-40-01 
Cargo Lining Panels 25-59-01 
Attendant Panel 25-23-05 
Oxygen Tubing 35-21-00 
Main Entry Door No. 1 52-11-01 
Floor Panels 53-21-02 
(SHEET 2 OF 2)

### Page 56

FIGURE 6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR 
LESS
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 56 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
FIGURE  6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR 
LESS
STA
2360
STA
1961.1
STA
1480
STA
1000
STA
520
SEE DETAIL I (PASS)
SEE DETAIL V (R6001)
SEE DETAIL II
NOTE: SEE DETAIL VII FOR A/P'S WITH MAIN DECK
SIDE CARGO DOOR MODIFICATION
SEE DETAIL III (PASS)
SEE DETAIL VI (R6001)
SEE DETAIL IV
1370872
(SHEET 1 OF 7)

### Page 57

FIGURE 6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR 
LESS
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 57 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE
STA 899
R6001
STA 774
ALL EXCEPT
R6001
STA 796.5
ALL EXCEPT
R6001
STA 755
R6001SEC 42
S-12
S-23
S-19
S-6
S-0
S-19
S-23
S-14
S-0
RIGHT SIDE OPPOSITE (EXCEPT CREW DOOR)
LEFT SIDE SHOWN
DETAIL II
DETAIL I
STA
520
1000
STA
941
STA
9411
STA
287
STA
520
STA
1
2
1370868
(SHEET 2 OF 7)

### Page 58

FIGURE 6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR 
LESS
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 58 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE
STA
1716SEC 46
FWD
SEC 46
AFT
S-23
S-19
S-12
S-4
S-23
S-19
S-12
S-4
DETAIL IV
LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE
ALL EXCEPT R6001 SEE DETAIL VI
DETAIL III
STA
1961
2360
STA
1
1
1741
STA
STA
1638
1572
STA
STA
STA
1480
1961
1484
STA
1
1370874
(SHEET 3 OF 7)

### Page 59

FIGURE 6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR 
LESS
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 59 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
1485
STA
1961
STA
STA
1480
STA
1538
STA
1642STA
1642
STA
1737
STA
1741
SEC 46
FWD
R6001
LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE
SEC 41
R6001
STA
1572
S-12
S-4
S-19
S-23
S-0
S-14
S-19
S-23
STA
520
STA
287
1
DETAIL VI
LEFT SIDE SHOWN
RIGHT SIDE OPPOSITE (EXCEPT CREW DOOR)
DETAIL V
1
1370879
(SHEET 4 OF 7)

### Page 60

FIGURE 6: LOCATIONS OF LAP JOINT UPPER (OVERLAPPING) SKIN THICKNESS 0.090 INCHES OR 
LESS
Original Issue: December 21, 1989
Revision 3:  April 16, 2009 747-53-2307
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 60 of 68
BOEING SERVICE BULLETIN 747-53-2307
 
 
STA
1480
STA
1572
STA
1700
STA
1735
STA
1960 STA
2000
STA
1965
S-4
S-12
S-19
S-23
STA
1638
STA
1716
STA
1485
6
3
4 5
1
4 5
DETAIL VII
1370880
(SHEET 5 OF 7)

The text continues at https://openairdocs.org/service-documents/boeing/sb-747-53-2307/file/07665fb75f66.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
