# Boeing Special Attention Service Bulletin 747-57-2332: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0566; AD 2012-05-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 747-57-2332](https://openairdocs.org/service-documents/boeing/sb-747-57-2332.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 85
- PDF: https://openairdocs.org/files/sha256/f0/fe/f0fe5e0a8db56ef45ba77290ac07fe79b39e5344c4d85af33d570e6358b2ac93
- Page: https://openairdocs.org/service-documents/boeing/sb-747-57-2332/file/f0fe5e0a8db5

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Number: 747-57-2332
Original Issue: November 09, 2010
ATA System: 5740
SUBJECT: WINGS - Leading Edge And Leading Edge Devices - Leading Edge Fluid Drainage
Path Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2010 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
1 of 85
6.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
2 of 85
BOEING SERVICE BULLETIN 747-57-2332
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 7
A. Effectivity ................................................ 7
1. Airplanes ............................................. 7
2. Spares Affected ........................................ 1 6
B. Concurrent Requirements ...................................... 1 6
C. Reason ................................................ 1 6
D. Description .............................................. 1 7
E. Compliance .............................................. 1 8
F. Approval ............................................... 1 8
G. Manpower .............................................. 1 9
H. Weight and Balance Changes .................................... 2 0
I. Electrical Load Data ......................................... 2 0
J. References .............................................. 2 0
1. Existing Data .......................................... 2 0
2. Data supplied with this Service Bulletin ............................ 2 1
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 1
K. Publications Affected ........................................ 2 1
L. Interchangeability and Intermixability of Parts ........................... 2 1
2. MATERIAL INFORMATION ........................................ 2 3
A. Material - Price and Availability ................................... 2 3
B. Industry Support Information .................................... 2 5
C. Parts Necessary For Each Airplane ................................. 2 5
1. Kits/Parts ............................................ 2 5
2. Parts and Materials Supplied by the Operator ........................ 3 7
3. Parts Modified and Reidentified ................................ 3 8
4. Parts Removed and Not Replaced .............................. 3 8
D. Parts Necessary to Change Spares ................................. 3 8
E. Special Tooling - Price and Availability ............................... 3 8
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 8
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9
A. GENERAL INFORMATION ..................................... 3 9
B. WORK INSTRUCTIONS ....................................... 4 0
FIGURE 1: OUTBOARD LEFT WING LEADING EDGE FLUID DAM INSTALLATION ......... 4 2
FIGURE 2: OUTBOARD RIGHT WING LEADING EDGE FLUID DAM INSTALLATION ........ 4 5
FIGURE 3: OUTBOARD LEADING EDGE LEFT WING SEAL CHANGE ................ 4 8
FIGURE 4: OUTBOARD LEADING EDGE RIGHT WING SEAL CHANGE ............... 5 0
FIGURE 5: LEFT WING LOWER SKIN PANEL REMOVAL ........................ 5 2
FIGURE 6: RIGHT WING LOWER SKIN PANEL REMOVAL ....................... 5 4
FIGURE 7: LEFT WING LOWER SKIN PANEL CHANGE ........................ 5 6
FIGURE 8: RIGHT WING LOWER SKIN PANEL CHANGE ....................... 5 8
FIGURE 9: LEFT WING LOWER LEADING EDGE PANEL AND DRAIN TUBE INSTALLATION . . . 60
FIGURE 10: RIGHT WING LOWER LEADING EDGE PANEL AND DRAIN TUBE INSTALLATION . . . 64
FIGURE 11: INBOARD LEFT WING LEADING EDGE FLUID DAM INSTALLATION [Group 1-6] .... 6 8
FIGURE 12: INBOARD RIGHT WING LEADING EDGE FLUID DAM INSTALLATION [Group 1-6] . . . 71
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
3 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 4

APPENDIX A: MASTER FASTENER CODE TABLE ............................. 7 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
4 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 5

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 747-57-2332Original Issue: November 09, 2010
ATA System: 5740
SUBJECT: WINGS - Leading Edge And Leading Edge Devices - Leading Edge Fluid Drainage
Path Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to modify the fluid drain path in the wing leading edge area, forward of
the wing front spar. If this service bulletin is not incorporated, flammable fluids accumulating in the wing leading
edge may drain inboard and onto the engine exhaust nozzle, which could result in a fire.
Boeing has received a report of leaking fuel from the wing leading edge area at the inboard end of the number
5 leading edge slat of a 737 airplane. The leak was discovered during a post flight inspection with a fuel quantity
of over 2500 lbs. Subsequent investigation found that the leak occurred in an area of the front spar that does
not have a proper drain path. This led to the fuel draining onto the engine exhaust nozzle. The leak appears to
have been caused by a loose retaining nut of the slat track down stop and is the subject of Boeing Service Letter
737-SL-57-084.
Accomplishment of this service bulletin will make sure that there is a drain path to safely direct all fluid leakages
from the wing leading edge away from the engine exhaust area.
Boeing Service Related Problem (SRP) 747-SRP-57-0214 is related to this service bulletin.
ACTION (PRR 85901-96RS)
Get access to the leading edge of the wing by extending the variable camber flaps. Install the applicable fuel
dam assemblies, seal assemblies and drain assemblies. Repair the leading edge lower skin panel. Close access.
EFFECTIVITY
747-100, -100B, -100B SUD, -200B, -200F, -200C, -300, -400, -400D, -400F, 747SR and 747SP Airplanes.
Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
5 of 85

### Page 6

COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 60 months after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of November 15, 2007. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
55.0094.50GROUP 1-6
50.5090.00GROUP 7-10
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
6 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 7

Commercial 
Airplanes
747
Service Bulletin
SPECIAL ATTENTION
Number: 747-57-2332
Original Issue: November 09, 2010
ATA System: 5740
SUBJECT: WINGS - Leading Edge And Leading Edge Devices - Leading Edge Fluid Drainage
Path Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
DESCRIPTIONCONFIGURATIONGROUP
747-100 Airplanes with line numbers 1-248.-1
747-100 Airplanes with line numbers 252-281 and 747SP Airplanes
with JT9D-7 Engines.
-2
747SR Airplanes with line numbers 221-249.-3
747SR Airplane with line number 254.-4
747SR Airplanes with line numbers 346-572 and 747-100B Airplanes
with JT9D-7 Engines and 747-100B SUD Airplanes.
-5
747-200B, 747-200C, 747-200F and 747-300 Airplanes with either
JT9D-7 or CF6-50 engines.
-6
747-400, 747-400D and 747-400F Airplanes.-7
747SP Airplanes with RB211 series Engines.-8
747-100B Airplanes with RB211 series Engines.-9
747-200B, 747-200F and 747-300 Airplanes with either JT9D-70,
CF6-80 or RB211 series Engines.
-10
Airplane Models:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
7 of 85

### Page 8

747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400,
747-400D, 747-400F, 747SP, 747SR
GroupVariable Number
1RA001 - RA034
1RA101 - RA115
1RA161 - RA164
1RA201 - RA203
6RA216 - RA217
6RA245 - RA246
1RA251 - RA264
2RA265 - RA266
1RA301 - RA317
2RA318
1RA351 - RA360
6RA369 - RA373
1RA401 - RA418
1RA501 - RA502
1RA521 - RA527
2RA528
6RA532 - RA548
1RA551 - RA552
6RA559 - RA561
1RA581 - RA582
6RA585
1RA601 - RA602
1RA631 - RA635
6RA651 - RA652
6RA671 - RA677
6RA701 - RA702
6RA721 - RA731
1RA741 - RA745
6RA749 - RA750
1RA761 - RA762
6RA781 - RA784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
8 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 9

GroupVariable Number
1RA901 - RA916
6RB001 - RB016
1RB041 - RB044
6RB071 - RB075
1RB101 - RB102
10RB411 - RB413
6RB421
3RB601 - RB606
4RB607
5RB681 - RB697
5RB711
5RB721 - RB723
9RB741 - RB747
6RD001 - RD004
6RD021 - RD022
6RD041 - RD059
6RD071 - RD072
6RD081 - RD083
6RD091 - RD092
6RD101 - RD104
6RD121 - RD127
10RD131 - RD144
10RD166 - RD167
6RD171 - RD172
6RD181 - RD183
6RD201 - RD204
6RD221 - RD227
6RD231 - RD235
6RD241 - RD243
6RD251 - RD262
6RD271 - RD272
6RD291 - RD292
6RD301 - RD302
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
9 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 10

GroupVariable Number
10RD311
10RD351 - RD358
6RD361 - RD366
6RD381 - RD383
6RD411 - RD414
6RD421 - RD426
6RD431 - RD435
6RD441 - RD442
6RD451 - RD456
6RD461
10RD471 - RD475
6RD513 - RD516
10RD517 - RD519
6RD531
10RD532 - RD533
6RD551
10RD561
6RD571
6RD581 - RD583
10RD591 - RD592
6RD593
6RD601 - RD607
6RD621 - RD623
6RD641 - RD649
6RD651 - RD659
6RD661
6RD671
6RD681 - RD682
6RD691 - RD692
6RD701 - RD702
6RD721 - RD722
6RD741 - RD742
6RD751 - RD755
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
10 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 11

GroupVariable Number
6RD761
6RD771 - RD775
6RD781 - RD783
6RD791 - RD792
6RE001
7RF001 - RF006
2RG001 - RG009
2RG091
2RG095
2RG101 - RG104
2RG121 - RG126
2RG141 - RG142
2RG161 - RG164
2RG171 - RG174
2RG191 - RG193
2RG211 - RG213
2RG221 - RG222
8RH101 - RH102
8RH111 - RH112
8RH121 - RH122
6RJ131 - RJ133
6RJ151 - RJ152
6RJ301 - RJ303
6RJ321 - RJ322
6RJ331 - RJ333
7RL401 - RL403
7RL411 - RL436
7RL451 - RL456
7RL461 - RL462
7RL471 - RL481
7RL491 - RL492
7RL501 - RL502
7RL511 - RL516
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
11 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 12

GroupVariable Number
7RL521 - RL522
7RL531 - RL534
7RL551
7RL561 - RL568
7RL571 - RL572
7RL576 - RL577
7RL579
7RL581 - RL586
7RL651 - RL655
7RL671 - RL675
7RL681 - RL684
7RL751 - RL752
7RM001 - RM007
7RM010 - RM013
7RM021 - RM024
7RM026 - RM030
7RM036 - RM045
7RM051 - RM053
7RM071
7RM081 - RM084
7RM091
7RM096 - RM097
7RM116 - RM117
7RM126 - RM132
7RM136 - RM147
7RM156 - RM158
7RM166 - RM177
7RM191 - RM192
7RM231 - RM233
7RM241 - RM246
7RM261 - RM264
7RM316 - RM318
7RM331 - RM333
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
12 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 13

GroupVariable Number
7RM341
7RM351 - RM355
7RM366 - RM367
7RM401 - RM403
7RM426
7RM431
7RM441 - RM443
7RM445
7RM801 - RM803
7RM811 - RM813
7RM851 - RM859
7RM861 - RM863
7RM871 - RM899
7RM901 - RM906
7RM911
6RR001 - RR005
6RR021 - RR025
6RR031
6RR201 - RR206
10RR221 - RR224
6RR225 - RR226
6RR261 - RR267
6RR301 - RR310
6RR331 - RR332
6RR336
6RR341 - RR345
6RR361 - RR362
10RR421
6RR422
6RR431 - RR432
10RR441 - RR442
6RR451
6RR501 - RR504
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
13 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 14

GroupVariable Number
6RR521 - RR522
10RR526
10RR531
6RR551 - RR556
6RR561
6RR566
7RR701
7RR721 - RR724
7RR746 - RR748
7RR851 - RR856
7RR861 - RR862
7RR951 - RR952
5RS001 - RS002
6RS201
6RS211 - RS212
6RS221 - RS222
6RS231 - RS241
6RS251 - RS259
6RS263
6RS265 - RS268
10RS271 - RS276
6RS291 - RS292
10RS301 - RS306
10RS311 - RS320
10RS331 - RS333
10RS341 - RS342
6RS699
6RS701 - RS703
6RS711 - RS713
6RS721 - RS722
6RS731 - RS732
6RS741 - RS743
6RS751 - RS752
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
14 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 15

GroupVariable Number
6RS761 - RS762
6RS771
10RS781 - RS782
6RS786
7RT001 - RT014
7RT021 - RT022
7RT031 - RT035
7RT041 - RT047
7RT061
7RT071 - RT075
7RT101 - RT103
7RT121
7RT131 - RT137
7RT151 - RT152
7RT161 - RT168
7RT401 - RT412
7RT431 - RT447
7RT451 - RT469
7RT471 - RT499
7RT501 - RT535
7RT551 - RT568
7RT571 - RT591
7RT601 - RT657
7RT671 - RT673
7RT681 - RT682
7RT691 - RT699
7RT701 - RT704
7RT711 - RT717
7RT741 - RT757
7RT776 - RT777
7RT781 - RT784
7RT801 - RT803
7RT811 - RT814
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
15 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 16

GroupVariable Number
7RT831 - RT837
7RT861 - RT864
7RT876 - RT880
7RT931 - RT932
7RT945 - RT949
7RT951 - RT955
7RT966 - RT967
7RU001 - RU006
7RU016 - RU017
7RU031 - RU032
7RU051 - RU052
7RU059 - RU062
7RU081 - RU083
7RU101 - RU102
7RU121 - RU132
7RU801 - RU809
7RU831 - RU841
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to modify the fluid drain path in the wing leading edge area,
forward of the wing front spar. If this service bulletin is not incorporated, flammable fluids accumulating
in the wing leading edge may drain inboard and onto the engine exhaust nozzle, which could result in
a fire.
Boeing has received a report of leaking fuel from the wing leading edge area at the inboard end of the
number 5 leading edge slat of a 737 airplane. The leak was discovered during a post flight inspection
with a fuel quantity of over 2500 lbs. Subsequent investigation found that the leak occurred in an area
of the front spar that does not have a proper drain path. This led to the fuel draining onto the engine
exhaust nozzle. The leak appears to have been caused by a loose retaining nut of the slat track down
stop and is the subject of Boeing Service Letter 737-SL-57-084.
Accomplishment of this service bulletin will make sure that there is a drain path to safely direct all fluid
leakages from the wing leading edge away from the engine exhaust area.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
16 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 17

Boeing Service Related Problem (SRP) 747-SRP-57-0214 is related to this service bulletin.
D. Description
Get access to the leading edge of the wing by extending the variable camber flaps. Install the applicable
fuel dam assemblies, seal assemblies and drain assemblies. Repair the leading edge lower skin panel.
Close access.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-100
Group 2:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-100, 747SP
Group 3-4:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747SR
Group 5:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-100B, 747-100B SUD,
747SR
Group 6:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-200B, 747-200C, 747-200F,
747-300
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
17 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 18

Group 7:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-400, 747-400D, 747-400F
Group 8:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747SP
Group 9:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-100B
Group 10:
Affected Maintenance Zones
ZoneModel
521, 531, 621, 631747-200B, 747-200F, 747-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 60 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
18 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 19

G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1-6:
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
2.252.251Part 1: FIGURE 1
2.252.251Part 1: FIGURE 2
1.001.001Part 2: FIGURE 3
1.001.001Part 2: FIGURE 4
2.755.502Part 3: FIGURE 5
2.755.502Part 3: FIGURE 6
1.751.751Part 3: FIGURE 7
1.751.751Part 3: FIGURE 8
17.0034.002Part 3: FIGURE 9
17.0034.002Part 3: FIGURE 10
2.252.251Part 4: FIGURE 11
2.252.251Part 4: FIGURE 12
0.500.501Close Access
55.0094.50TOTAL FOR EACH AIRPLANE
Group 7-10:
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
2.252.251Part 1: FIGURE 1
2.252.251Part 1: FIGURE 2
1.001.001Part 2: FIGURE 3
1.001.001Part 2: FIGURE 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
19 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 20

Group 7-10:
Elapsed HoursTask HoursNumber of PersonsTask
2.755.502Part 3: FIGURE 5
2.755.502Part 3: FIGURE 6
1.751.751Part 3: FIGURE 7
1.751.751Part 3: FIGURE 8
17.0034.002Part 3: FIGURE 9
17.0034.002Part 3: FIGURE 10
0.500.501Close Access
50.5090.00TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Group 1-6:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 18290.0+ 11.8All Airplanes
Group 7-10:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 17292.0+ 11.0All Airplanes
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 85901-96RS
b. Boeing Service Related Problem (SRP) 747-SRP-57-0214
c. Standard Overhaul Practices Manual (SOPM) 20-10-06, 20-30-03, 20-50-00, 20-50-10,
20-50-18, 20-50-19
d. 747-100/200/300 Aircraft Maintenance Manual (AMM) 27-81-00, 78-31-00
e. 747-100/200/300 Structural Repair Manual (SRM) 51-40-12, 51-40-14
f. 747-400 Aircraft Maintenance Manual (AMM) 27-81-00, 78-31-00
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
20 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 21

g. 747-400 Structural Repair Manual (SRM) 51-70-07, 51-70-17
h. 747-400F Structural Repair Manual (SRM) 51-70-07, 51-70-17
i. 747-400LCF Structural Repair Manual (SRM) 51-70-07, 51-70-17
j. 747-400SF Structural Repair Manual (SRM) 51-70-07, 51-70-17
k. 747-SP Structural Repair Manual (SRM) 51-40-14
2. Data supplied with this Service Bulletin
a. Drawings:
ADCNDCN/REVSheetTitleDrawing No
--1LEADING EDGE FLUID DAM ASSEMBLY
- LOWER LEADING EDGE PANEL ASSEM-
BLY
624U0071
--2
3. Installation Drawings Used in the Preparation of this Service Bulletin
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
51-31747 Maintenance Manual
57-31747 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
21 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 22

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
22 of 85
BOEING SERVICE BULLETIN 747-57-2332
BLANK PAGE

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane as shown
below. If there is a limit to the quantity (QTY) of available kits, a supply sequence is given by Spares.
More kits become available as shown in the Reorder Lead Time (ROLT). ROLT is calculated from the
date Boeing gets the purchase order.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
23 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 24

Group 1-6:
Unit Price thru
November 30,
2010
ROLT
(Calendar
Days)
QTYDateNameKit Number
$33,609.0042025May 24,
2010
TOP KIT - WING LEAD-
ING EDGE DRAINAGE
015U1870-1
25June 22,
2010
13July 21,
2010
12October
11, 2010
25November
8, 2010
25December
8, 2010
25January
14, 2011
25February
11, 2011
25March 11,
2011
25April 8,
2011
25May 6,
2011
25June 6,
2011
15July 5,
2011
Group 7-10:
Unit Price thru
November 30,
2010
ROLT
(Calendar
Days)
QTYDateNameKit Number
$29,304.0042010May 24,
2010
TOP KIT - WING LEAD-
ING EDGE DRAINAGE
015U1870-2
4June 1,
2010
10June 22,
2010
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
24 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 25

Group 7-10:
Unit Price thru
November 30,
2010
ROLT
(Calendar
Days)
QTYDateNameKit Number
July 21,
2010
10
10August 18,
2010
10September
16, 2010
10October
14, 2010
10November
11, 2010
1December
13, 2010
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
After the Unit Price date, new price and ROLT data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Mail to:
Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
B. Industry Support Information
Boeing warranty remedies are available for 747 airplanes in warranty as of November 15, 2007. For
task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable numbers in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
25 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 26

NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
Figure Kit
874321Top Kit
111111015U1870-1
111111015U1870-2
Figure Kit
1211109Top Kit
1111015U1870-1
--11015U1870-2
Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
KIT DETAIL -
SEAL
1114U9202-10
KIT DETAIL -
DRAIN TUBE
114U9202-12
KIT - DRAIN FIT-
TING ASSY
1114U9202-15
KIT - DRAIN FIT-
TING ASSY
1114U9202-16
KIT DETAIL -
WEB, FLUID DAM
114U9202-19
KIT DETAIL -
WEB, FLUID DAM
114U9202-20
KIT DETAIL -
DRAIN TUBE RE-
TAINER
114U9202-24
KIT DETAIL -
BRACKET
11114U9202-3
KIT DETAIL -
BRACKET
11114U9202-4
KIT DETAIL -
WEB, FLUID DAM
1114U9202-5
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
26 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 27

Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
KIT DETAIL -
WEB, FLUID DAM
1114U9202-6
KIT DETAIL -
SEAL
1114U9202-9
BOLT1010BACB30LH3-5
BOLT-100 DEG
HEAD
BACB30NN3K3
BOLT, RADIUS
LEAD-IN
BACB30WQ5K13LY
BOLT, RADIUS
LEAD-IN
BACB30WQ5K14LY
BOLT, RADIUS
LEAD-IN
BACB30WQ6K10LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K10LY
BOLT, RADIUS
LEAD-IN
BACB30WQ6K12LY
BOLT, RADIUS
LEAD-IN
BACB30WQ6K14LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K15LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K8LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K8LY
BOLT, HEX DRIVEBACB30WQ6K9LX
BOLTBACB30WQ6K9LY
BOLT, RADIUS
LEAD-IN
BACB30WQ7K14L
BOLT, RADIUS
LEAD-IN
BACB30WQ7K15L
BOLT, HEX DRIVEBACB30YN12K15X
BOLT, HEX DRIVEBACB30YN12K16X
BOLT, HEX DRIVEBACB30YN14K15
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
27 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 28

Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
BOLTBACB30YN14K16
BOLT, 100 DEG
HEX DR
22BACB30YP6K4
COLLAR22BACC30BS6
NUTBACN10HY5ACX
SELF-LOCKING
NUT
BACN10HY6AC
NUTBACN10HY6ACX
SELF-LOCKING
NUT
BACN10HY7AC
SELF-LOCKING
NUT
BACN10YR6CD
NUTBACN10YR7CD
RIVET, 100 DEGBACR15BA7AD10C
RIVET, 100 DEG33BACR15BA7AD11C
RIVET, 100 DEGBACR15BA7AD12C
RIVET, 100 DEGBACR15BA7AD13C
RIVET, 100 DEGBACR15BA7D10C
RIVET, 100 DEGBACR15BA7D12C
RIVET, 100 DEGBACR15BA7D9C
RIVET, UNIVER-
SAL HD
66BACR15BB6D6C
RIVET, 100 DEGBACR15GF7D7
WASHERBACW10AT26AS
WASHERBACW10AT27AS
WASHERBACW10AT36AS
WASHERBACW10AT37AS
WASHER, FLATBACW10P448CG
WASHERBACW10P449CG
WASHER, FLATBACW10P454CG
WASHER, FLATBACW10P455CG
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
28 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 29

Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
WASHERNAS1149D0663J
WASHERNAS1149D0763J
RIVET, BLINDNAS1399MW6A4
CLAMP, HOSENAS1922-0050-3
Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
1211109
QTY
KIT DETAIL -
SEAL
114U9202-10
KIT DETAIL -
DRAIN TUBE
11114U9202-12
KIT - DRAIN FIT-
TING ASSY
114U9202-15
KIT - DRAIN FIT-
TING ASSY
114U9202-16
KIT DETAIL -
WEB, FLUID DAM
1114U9202-19
KIT DETAIL -
WEB, FLUID DAM
1114U9202-20
KIT DETAIL -
DRAIN TUBE RE-
TAINER
33114U9202-24
KIT DETAIL -
BRACKET
11114U9202-3
KIT DETAIL -
BRACKET
11114U9202-4
KIT DETAIL -
WEB, FLUID DAM
114U9202-5
KIT DETAIL -
WEB, FLUID DAM
114U9202-6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
29 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 30

Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
1211109
QTY
KIT DETAIL -
SEAL
114U9202-9
BOLTBACB30LH3-5
BOLT-100 DEG
HEAD
105105BACB30NN3K3
BOLT, RADIUS
LEAD-IN
22BACB30WQ5K13LY
BOLT, RADIUS
LEAD-IN
22BACB30WQ5K14LY
BOLT, RADIUS
LEAD-IN
66BACB30WQ6K10LX
BOLT, RADIUS
LEAD-IN
66BACB30WQ6K10LY
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K12LY
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K14LX
BOLT, RADIUS
LEAD-IN
88BACB30WQ6K15LX
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K8LX
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K8LY
BOLT, HEX DRIVE66BACB30WQ6K9LX
BOLT66BACB30WQ6K9LY
BOLT, RADIUS
LEAD-IN
1010BACB30WQ7K14L
BOLT, RADIUS
LEAD-IN
1515BACB30WQ7K15L
BOLT, HEX DRIVE66BACB30YN12K15X
BOLT, HEX DRIVE66BACB30YN12K16X
BOLT, HEX DRIVE22BACB30YN14K15
BOLT44BACB30YN14K16
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
30 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 31

Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
1211109
QTY
BOLT, 100 DEG
HEX DR
BACB30YP6K4
COLLARBACC30BS6
NUT44BACN10HY5ACX
SELF-LOCKING
NUT
2525BACN10HY6AC
NUT1515BACN10HY6ACX
SELF-LOCKING
NUT
2525BACN10HY7AC
SELF-LOCKING
NUT
1515BACN10YR6CD
NUT66BACN10YR7CD
RIVET, 100 DEG1515BACR15BA7AD10C
RIVET, 100 DEG5152BACR15BA7AD11C
RIVET, 100 DEG223738BACR15BA7AD12C
RIVET, 100 DEG3030BACR15BA7AD13C
RIVET, 100 DEG11BACR15BA7D10C
RIVET, 100 DEG11BACR15BA7D12C
RIVET, 100 DEG11BACR15BA7D9C
RIVET, UNIVER-
SAL HD
67BACR15BB6D6C
RIVET, 100 DEG66BACR15GF7D7
WASHER2525BACW10AT26AS
WASHER2525BACW10AT27AS
WASHER2525BACW10AT36AS
WASHER2525BACW10AT37AS
WASHER, FLAT44BACW10P448CG
WASHER1515BACW10P449CG
WASHER, FLAT44BACW10P454CG
WASHER, FLAT1515BACW10P455CG
WASHER2525NAS1149D0663J
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
31 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 32

Group 1-6:
KIT 015U1870-1
NOTES
Existing Part
NumberName
Figure
New Part Number
1211109
QTY
WASHER1515NAS1149D0763J
RIVET, BLIND22NAS1399MW6A4
CLAMP, HOSE11NAS1922-0050-3
Group 7-10:
KIT 015U1870-2
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
KIT DETAIL -
SEAL
1114U9202-10
KIT DETAIL -
DRAIN TUBE
114U9202-12
KIT - DRAIN FIT-
TING ASSY
1114U9202-15
KIT - DRAIN FIT-
TING ASSY
1114U9202-16
KIT DETAIL -
DRAIN TUBE RE-
TAINER
114U9202-24
KIT DETAIL -
BRACKET
11114U9202-3
KIT DETAIL -
BRACKET
11114U9202-4
KIT DETAIL -
WEB, FLUID DAM
1114U9202-5
KIT DETAIL -
WEB, FLUID DAM
1114U9202-6
KIT DETAIL -
SEAL
1114U9202-9
BOLT1010BACB30LH3-5
BOLT-100 DEG
HEAD
BACB30NN3K3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
32 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 33

Group 7-10:
KIT 015U1870-2
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
BOLT, RADIUS
LEAD-IN
BACB30WQ5K13LY
BOLT, RADIUS
LEAD-IN
BACB30WQ5K14LY
BOLT, RADIUS
LEAD-IN
BACB30WQ6K10LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K10LY
BOLT, RADIUS
LEAD-IN
BACB30WQ6K12LY
BOLT, RADIUS
LEAD-IN
BACB30WQ6K14LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K15LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K8LX
BOLT, RADIUS
LEAD-IN
BACB30WQ6K8LY
BOLT, HEX DRIVEBACB30WQ6K9LX
BOLTBACB30WQ6K9LY
BOLT, RADIUS
LEAD-IN
BACB30WQ7K14L
BOLT, RADIUS
LEAD-IN
BACB30WQ7K15L
BOLT, HEX DRIVEBACB30YN12K15X
BOLT, HEX DRIVEBACB30YN12K16X
BOLT, HEX DRIVEBACB30YN14K15
BOLTBACB30YN14K16
BOLT, 100 DEG
HEX DR
22BACB30YP6K4
COLLAR22BACC30BS6
NUTBACN10HY5ACX
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
33 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 34

Group 7-10:
KIT 015U1870-2
NOTES
Existing Part
NumberName
Figure
New Part Number
874321
QTY
SELF-LOCKING
NUT
BACN10HY6AC
NUTBACN10HY6ACX
SELF-LOCKING
NUT
BACN10HY7AC
SELF-LOCKING
NUT
BACN10YR6CD
NUTBACN10YR7CD
RIVET, 100 DEGBACR15BA7AD10C
RIVET, 100 DEG33BACR15BA7AD11C
RIVET, 100 DEGBACR15BA7AD12C
RIVET, 100 DEGBACR15BA7AD13C
RIVET, 100 DEGBACR15BA7D10C
RIVET, 100 DEGBACR15BA7D12C
RIVET, 100 DEGBACR15BA7D9C
RIVET, UNIVER-
SAL HD
66BACR15BB6D6C
RIVET, 100 DEGBACR15GF7D7
WASHERBACW10AT26AS
WASHERBACW10AT27AS
WASHERBACW10AT36AS
WASHERBACW10AT37AS
WASHER, FLATBACW10P448CG
WASHERBACW10P449CG
WASHER, FLATBACW10P454CG
WASHER, FLATBACW10P455CG
WASHERNAS1149D0663J
WASHERNAS1149D0763J
RIVET, BLINDNAS1399MW6A4
CLAMP, HOSENAS1922-0050-3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
34 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 35

Group 7-10:
KIT 015U1870-2
NOTES
Existing Part
NumberName
Figure
New Part Number
109
QTY
KIT DETAIL -
SEAL
114U9202-10
KIT DETAIL -
DRAIN TUBE
11114U9202-12
KIT - DRAIN FIT-
TING ASSY
114U9202-15
KIT - DRAIN FIT-
TING ASSY
114U9202-16
KIT DETAIL -
DRAIN TUBE RE-
TAINER
33114U9202-24
KIT DETAIL -
BRACKET
114U9202-3
KIT DETAIL -
BRACKET
114U9202-4
KIT DETAIL -
WEB, FLUID DAM
114U9202-5
KIT DETAIL -
WEB, FLUID DAM
114U9202-6
KIT DETAIL -
SEAL
114U9202-9
BOLTBACB30LH3-5
BOLT-100 DEG
HEAD
105105BACB30NN3K3
BOLT, RADIUS
LEAD-IN
22BACB30WQ5K13LY
BOLT, RADIUS
LEAD-IN
22BACB30WQ5K14LY
BOLT, RADIUS
LEAD-IN
66BACB30WQ6K10LX
BOLT, RADIUS
LEAD-IN
66BACB30WQ6K10LY
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K12LY
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
35 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 36

Group 7-10:
KIT 015U1870-2
NOTES
Existing Part
NumberName
Figure
New Part Number
109
QTY
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K14LX
BOLT, RADIUS
LEAD-IN
88BACB30WQ6K15LX
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K8LX
BOLT, RADIUS
LEAD-IN
11BACB30WQ6K8LY
BOLT, HEX DRIVE66BACB30WQ6K9LX
BOLT66BACB30WQ6K9LY
BOLT, RADIUS
LEAD-IN
1010BACB30WQ7K14L
BOLT, RADIUS
LEAD-IN
1515BACB30WQ7K15L
BOLT, HEX DRIVE66BACB30YN12K15X
BOLT, HEX DRIVE66BACB30YN12K16X
BOLT, HEX DRIVE22BACB30YN14K15
BOLT44BACB30YN14K16
BOLT, 100 DEG
HEX DR
BACB30YP6K4
COLLARBACC30BS6
NUT44BACN10HY5ACX
SELF-LOCKING
NUT
2525BACN10HY6AC
NUT1515BACN10HY6ACX
SELF-LOCKING
NUT
2525BACN10HY7AC
SELF-LOCKING
NUT
1515BACN10YR6CD
NUT66BACN10YR7CD
RIVET, 100 DEG1515BACR15BA7AD10C
RIVET, 100 DEG5152BACR15BA7AD11C
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
36 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 37

Group 7-10:
KIT 015U1870-2
NOTES
Existing Part
NumberName
Figure
New Part Number
109
QTY
RIVET, 100 DEG3738BACR15BA7AD12C
RIVET, 100 DEG3030BACR15BA7AD13C
RIVET, 100 DEG11BACR15BA7D10C
RIVET, 100 DEG11BACR15BA7D12C
RIVET, 100 DEG11BACR15BA7D9C
RIVET, UNIVER-
SAL HD
BACR15BB6D6C
RIVET, 100 DEG66BACR15GF7D7
WASHER2525BACW10AT26AS
WASHER2525BACW10AT27AS
WASHER2525BACW10AT36AS
WASHER2525BACW10AT37AS
WASHER, FLAT44BACW10P448CG
WASHER1515BACW10P449CG
WASHER, FLAT44BACW10P454CG
WASHER, FLAT1515BACW10P455CG
WASHER2525NAS1149D0663J
WASHER1515NAS1149D0763J
RIVET, BLIND22NAS1399MW6A4
CLAMP, HOSE11NAS1922-0050-3
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a)Sealant3 QtBMS5-95
(a)Anti-Static Coating3 OzBMS10-21, TYPE
III
(a)Two Part Hole Filling Compound6 OzBMS5-16
(a)Glass Fabric2 ftBMS8-79, CLASS
III, STYLE 1581
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
37 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 38

NotesNameQTYPart Number /
Specification
(a)Glass Fabric Reinforcement2 ftBMS9-3, TYPE H-
2
(b)Two Part Resin for Composite Re-
pairs
8 OzRESIN MIX 3
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for
supplier data.
(b) Refer to 747-100/200/300 SRM 51-40-12, 747-100/200/300 SRM 51-40-14, 747-400
SRM 51-70-07 or 747-400 SRM 51-70-17, as applicable, for material specification and
supplier information.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c) (d)65B10873Skin Panel Assembly,
Leading Edge Wing
265B10873
SB 747-57-2332
(a) Make the change in accordance with this service bulletin.
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
(c) This is the part number after the change is done in accordance with this service bulletin.
(d) This part is not used in production.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
38 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 39

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are in 747 SRM, Chapter 51
– Torque limits to tighten nuts and bolts are in 747 SRM, Chapter 51
5. Use the approved fastener and process material substitutions in accordance with
747 SRM, Chapter 51. Alternate fasteners are listed in 747 SRM Chapter 51 and
Boeing Drawing 012W6100.
6. If the length of any fastener specified in this service bulletin does not meet the
installation standards in SRM Chapter 51, then a fastener of the same specification,
or an approved substitute, with a length which meets the installation standards in
SRM Chapter 51 may be used.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Refer to APPENDIX A for Master Fastener Code Table.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
39 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 40

B. WORK INSTRUCTIONS
ACCESS
1. Deactivate the thrust reverser for ground maintenance. Refer to 747-100/200/300 AMM 78-31-00
or 747-400 AMM 78-31-00 as an accepted procedure, as applicable.
2. Extend the variable camber leading edge flaps to the fully extended position and deactivate. Refer
to 747-100/200/300 AMM 27-81-00 or 747-400 AMM 27-81-00 as an accepted procedure, as
applicable.
Part 1 - Outboard Leading Edge Fluid Dam Installation
1. At Outboard Leading Edge Station (OLES) 1250, install fluid dam assemblies in accordance with
the figures below:
Right WingLeft Wing
FIGURE 2FIGURE 1
Part 2 - Outboard Leading Edge Seal Change
1. At OLES 1185, install seal assemblies in accordance with the figures below:
Right WingLeft Wing
FIGURE 4FIGURE 3
Part 3 - Inboard Leading Edge Drain Tube Installation
1. Between Inboard Leading Edge Station (ILES) 1116 and ILES 994, remove the lower leading edge
panel in accordance with the figures below:
Right WingLeft Wing
FIGURE 6FIGURE 5
2. Change the lower leading edge panel in accordance with the figures below:
Right WingLeft Wing
FIGURE 8FIGURE 7
3. Install the lower leading edge panel and drain tube assembly in accordance with the figures below:
Right WingLeft Wing
FIGURE 10FIGURE 9
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
40 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 41

Group 1-6:
Part 4 - Inboard Leading Edge Fluid Dam Installation
1. At ILES 770, install fluid dam assemblies in accordance with the figures below:
Right WingLeft Wing
FIGURE 12FIGURE 11
Close Access
1. Retract the variable camber leading edge flaps to the fully up position and activate. Refer to
747-100/200/300 AMM 27-81-00 or 747-400 AMM 27-81-00 as an accepted procedure, as
applicable.
2. Activate the thrust reversers. Refer to 747-100/200/300 AMM 78-31-00 or 747-400 AMM 78-31-00
as an accepted procedure, as applicable.
3. Put the airplane back to serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
41 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 42 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
2222122
FRONT SPAR
AGAN
BEAM PANEL
SUPPORT
0.90
0.70
• 0.47 MIN
OLES  24
1250.55
3GAN
DRAIN HOLE
0.26  2) 4
LOWER LEADING  0.23
EDGE PANEL  0.38
AIN
0.38
- 0.50
BEAM PANEL
SUPPORT  FWD  A-A  LOWER LEADING  EDGE PANEL
FIGURE 1: OUTBOARD LEFT WING LEADING EDGE FLUID DAM INSTALLATION
(SHEET 1 OF 3)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  42 of 85

### Page 43

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
2-FastenerRemove1
as shown.1114U9202-3KIT DETAIL - BRACK-
ET
Locate2
as shown.1114U9202-4KIT DETAIL - BRACK-
ET
Locate
as shown.1114U9202-5KIT DETAIL - WEB,
FLUID DAM
Locate
8-HoleDrill3
and deburr.8-HoleClean
1114U9202-3KIT DETAIL - BRACK-
ET
Install (New)4
Fay surface seal be-
tween mating sur-
face of bracket to
lower wing skin with
BMS5-95. Refer to
SOPM 20-50-19 as
an accepted proce-
dure. Make sure
drainage hole is
clear of sealant.
1114U9202-4KIT DETAIL - BRACK-
ET
Install (New)
Fay surface seal be-
tween mating sur-
face of fluid dam to
lower wing skin with
BMS5-95. Refer to
SOPM 20-50-19 as
an accepted proce-
dure. Make sure
drainage hole is
clear of sealant.
1114U9202-5KIT DETAIL - WEB,
FLUID DAM
Install (New)
8-FastenerInstall (New)5
as required to apply
fillet seal to both
sides of fluid dam.
Refer to SOPM 20-
50-19 as an accept-
ed procedure. Make
sure drainage hole
is clear of sealant.
-BMS5-95SealantApply6
FIGURE 1: OUTBOARD LEFT WING LEADING EDGE FLUID DAM INSTALLATION
(SHEET 2 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
43 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 44

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Apply bead of
sealant extending
from fluid dam to
forward edge of
beam panel support.
Make sure sealant is
flush with top of fluid
dam.
-BMS5-95SealantApply7
The parts listed below are used in this figure. Refer to APPENDIX A for fastener codes.
MORE DATAQTYIDENTIFICATIONNAME
6BACR15BB6D6CRIVET, UNIVERSAL
HD
(a)3BACR15BA7AD11CRIVET, 100 DEG
(a) Quantity may be in excess of requirements.
FIGURE 1: OUTBOARD LEFT WING LEADING EDGE FLUID DAM INSTALLATION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
44 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
FRONT SPAR
Ař ®€
AN 3€
0.90
→ 0.70
0.47 MIN
(2) 4  OLES
1250.55
DRAIN HOLE
0.26
0.23
LOWER LEADING
0.38  EDGE PANEL
BEAM PANEL
0.38  SUPPORT
0.50  BEAM PANEL
LOWER LEADING  EDGE PANEL  A-A  FWD  SUPPORT  1914516
FIGURE 2: OUTBOARD RIGHT WING LEADING EDGE FLUID DAM INSTALLATION
(SHEET 1 OF 3)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  45 of 85

### Page 46

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
2-FastenerRemove1
as shown.1114U9202-3KIT DETAIL - BRACK-
ET
Locate2
as shown.1114U9202-4KIT DETAIL - BRACK-
ET
Locate
as shown.1114U9202-6KIT DETAIL - WEB,
FLUID DAM
Locate
8-HoleDrill3
and deburr.8-HoleClean
1114U9202-3KIT DETAIL - BRACK-
ET
Install (New)4
Fay surface seal be-
tween mating sur-
face of bracket to
lower wing skin with
BMS5-95. Refer to
SOPM 20-50-19 as
an accepted proce-
dure. Make sure
drainage hole is
clear of sealant.
1114U9202-4KIT DETAIL - BRACK-
ET
Install (New)
Fay surface seal be-
tween mating sur-
face of fluid dam to
lower wing skin with
BMS5-95. Refer to
SOPM 20-50-19 as
an accepted proce-
dure. Make sure
drainage hole is
clear of sealant.
1114U9202-6KIT DETAIL - WEB,
FLUID DAM
Install (New)
8-FastenerInstall (New)5
as required to apply
fillet seal to both
sides of fluid dam.
Refer to SOPM 20-
50-19 as an accept-
ed procedure. Make
sure drainage hole
is clear of sealant.
-BMS5-95SealantApply6
FIGURE 2: OUTBOARD RIGHT WING LEADING EDGE FLUID DAM INSTALLATION
(SHEET 2 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
46 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 47

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Apply bead of
sealant extending
from fluid dam to
forward edge of
beam panel support.
Make sure sealant is
flush with top of fluid
dam.
-BMS5-95SealantApply7
The parts listed below are used in this figure. Refer to APPENDIX A for fastener codes.
MORE DATAQTYIDENTIFICATIONNAME
6BACR15BB6D6CRIVET, UNIVERSAL
HD
(a)3BACR15BA7AD11CRIVET, 100 DEG
(a) Quantity may be in excess of requirements.
FIGURE 2: OUTBOARD RIGHT WING LEADING EDGE FLUID DAM INSTALLATION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
47 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 48 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
VARIABLE
CAMBER
FLAPS
RETAINER  BULB SEAL
NACELLE STRUT SEAL
A-A
9 LOCATIONS
1G00
1914187
FIGURE 3: OUTBOARD LEADING EDGE LEFT WING SEAL CHANGE
(SHEET 1 OF 2)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  48 of 85

### Page 49

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
9-FastenerRemove1
1-RetainerRemove / Keep2
4.20 inches from
edge of retainer.
1-Bulb SealCut3
with BMS5-16 - Hole
Filling Compound.
Refer to SOPM 20-
50-19 as an accept-
ed procedure.
1-Drainage HoleFill4
in contact with the
end of the existing
bulb seal and
aligned with the for-
ward edge of the re-
tainer.
1114U9202-9KIT DETAIL - SEALLocate5
as shown.1-RetainerLocate
Mark hole locations
on seal.
2-HoleLocate6
1-RetainerRemove / Keep7
1114U9202-9KIT DETAIL - SEALRemove / Keep
Diameter of holes is
0.35 inches.
2-HoleDrill8
1114U9202-9KIT DETAIL - SEALInstall (New)9
1-RetainerInstall (Kept)
9BACB30LH3-5BOLTInstall (New)
The parts shown in the table below are provided as extra parts for this figure.
MORE DATAQTYIDENTIFICATIONNAME
1BACB30LH3-5BOLT
FIGURE 3: OUTBOARD LEADING EDGE LEFT WING SEAL CHANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
49 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 50 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
VARIABLE
CAMBER
FLAPS
BULB SEAL  RETAINER
NACELLE STRUT SEAL
A-A
9 LOCATIONS
500
1914327
FIGURE 4: OUTBOARD LEADING EDGE RIGHT WING SEAL CHANGE
(SHEET 1 OF 2)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  50 of 85

### Page 51

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
9-FastenerRemove1
1-RetainerRemove / Keep2
4.20 inches from
edge of retainer.
1-Bulb SealCut3
with BMS5-16 - Hole
Filling Compound.
Refer to SOPM 20-
50-19 as an accept-
ed procedure.
1-Drainage HoleFill4
in contact with the
end of the existing
bulb seal and
aligned with the for-
ward edge of the re-
tainer.
1114U9202-10KIT DETAIL - SEALLocate5
as shown.1-RetainerLocate
Mark hole locations
on seal.
2-HoleLocate6
1-RetainerRemove / Keep7
1114U9202-10KIT DETAIL - SEALRemove / Keep
Diameter of holes is
0.35 inches.
2-HoleDrill8
1114U9202-10KIT DETAIL - SEALInstall (New)9
1-RetainerInstall (Kept)
9BACB30LH3-5BOLTInstall (New)
The parts shown in the table below are provided as extra parts for this figure.
MORE DATAQTYIDENTIFICATIONNAME
1BACB30LH3-5BOLT
FIGURE 4: OUTBOARD LEADING EDGE RIGHT WING SEAL CHANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
51 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 52 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
AND
ILES  ILES
1048.25  1116.00
INBD
ILES
994.55
ILES
1048.25
NBD
B  1914246
FIGURE 5: LEFT WING LOWER SKIN PANEL REMOVAL
(SHEET 1 OF 2)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  52 of 85

### Page 53

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Recommend noting
fastener type re-
moved from each
hole for future refer-
ence.
--FastenerRemove1
165B10873-7, -27Skin Panel Assy, Lead-
ing Edge Wing
Remove / Keep2
FIGURE 5: LEFT WING LOWER SKIN PANEL REMOVAL
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
53 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
• AND TE
ILES  ILES
1116.00  1048.25
INBD
NILES
994.55
ILES
1048.25
INBD
1914249
FIGURE 6: RIGHT WING LOWER SKIN PANEL REMOVAL
(SHEET 1 OF 2)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  54 of 85

### Page 55

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Recommend noting
fastener type re-
moved from each
hole for future refer-
ence.
--FastenerRemove1
165B10873-8, -28Skin Panel Assy, Lead-
ing Edge Wing
Remove / Keep2
FIGURE 6: RIGHT WING LOWER SKIN PANEL REMOVAL
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
55 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 56 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
36.25
35.75
FROM
OUTBOARD
EDGE OF
LOWER SKIN
PANEL  1.425  71.425
100.0°
TYPICAL  , R0.750 (2 LOCATIONS)  0.350
EDGE OF PANEL
SLOPE  REPLACE TWO INITIAL PLIES
AND ADD TWO EXTRA PLIES
B —  0.00 -
A-A  TO CORE EDGE
30°
2.960  20° TYPICAL
- MIN. FLAT-→
FILLER PLIES ADDED TO
0.115  OBTAIN SPECIFIED THICKNESS
0.100
ROTATED 90 ° CW
B-B
1914294
FIGURE 7: LEFT WING LOWER SKIN PANEL CHANGE
(SHEET 1 OF 2)
Original Issue: November 09, 2010
BOEING PROPRIETARY -  747-57-2332
Copyright © Unpublished Work - See page 1 for details.  56 of 85

### Page 57

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
as shown above.
Remove existing
plies, cut core and
install new plies in
accordance with (a).
Replace the two ex-
isting plies and add
two extra repair
plies.
165B10873-7, -27Skin Panel Assy, Lead-
ing Edge Wing
Change1
Drainage hole diam-
eter is 0.375 in.
1-HoleDrill2
1114U9202-15KIT - DRAIN FITTING
ASSY
Put / Hold3
Hole diameter: 0.190
- 0.193 in.
2-HoleDrill4
and deburr.3-HoleClean5
1114U9202-15KIT - DRAIN FITTING
ASSY
Install (New)6
Refer to SOPM 20-
50-18 as an accept-
ed procedure.
2BACB30YP6K4BOLT, 100 DEG HEX
DR
Install (New)7
2BACC30BS6COLLARInstall (New)
Rubber stamp part
number on the part.
Refer to SOPM 20-
50-10 as an accept-
ed procedure.
1SB 747-57-2332Part NumberApply8
(a) 747-100/200/300 SRM 51-40-12, 747-100/200/300 SRM 51-40-14, 747-400 SRM 51-70-07, 747-400
SRM 51-70-17, 747-400F SRM 51-70-07, 747-400F SRM 51-70-17, 747-400LCF SRM 51-70-07, 747-
400LCF SRM 51-70-17, 747-400SF SRM 51-70-07, 747-400SF SRM 51-70-17 or 747-SP SRM 51-40-
14, as applicable.
FIGURE 7: LEFT WING LOWER SKIN PANEL CHANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
57 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 58 (OCR)

BOEING SERVICE BULLETIN 747-57-2332
> A
→ B
36.25
35.75
FROM
OUTBOARD
EDGE OF
LOWER SKIN
PANEL
1.425  -1.425
100.0°
R 0.750  TYPICAL
(2 LOCATIONS)  0.350
3.100
2.260
EDGE OF PANEL
SLOPE
→B
REPLACE TWO INITIAL PLIES  A-A
AND ADD TWO EXTRA PLIES
0.00 TO CORE EDGE  0.20
TYPICAL 20°  2.960
- MIN. FLAT—→
0.115
ROTATED 90° CCW  0.100
B-B  FILLER PLIES
ADDED TO OBTAIN  1914587
SPECIFIED THICKNESS
FIGURE 8: RIGHT WING LOWER SKIN PANEL CHANGE
(SHEET 1 OF 2)
Original Issue: November 09, 2010
747-57-2332
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  58 of 85

### Page 59

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
as shown above.
Remove existing
plies, cut core and
install new plies in
accordance with (a).
Replace the two ex-
isting plies and add
two extra repair
plies.
165B10873-8, -28Skin Panel Assy, Lead-
ing Edge Wing
Change1
Drainage hole diam-
eter is 0.375 in.
1-HoleDrill2
1114U9202-16KIT - DRAIN FITTING
ASSY
Put / Hold3
Hole diameter: 0.190
- 0.193 in.
2-HoleDrill4
and deburr.3-HoleClean5
1114U9202-16KIT - DRAIN FITTING
ASSY
Install (New)6
Refer to SOPM 20-
50-18 as an accept-
ed procedure.
2BACB30YP6K4BOLT, 100 DEG HEX
DR
Install (New)7
2BACC30BS6COLLARInstall (New)
Rubber stamp part
number on the part.
Refer to SOPM 20-
50-10 as an accept-
ed procedure.
1SB 747-57-2332Part NumberApply8
(a) 747-100/200/300 SRM 51-40-12, 747-100/200/300 SRM 51-40-14, 747-400 SRM 51-70-07, 747-400
SRM 51-70-17, 747-400F SRM 51-70-07, 747-400F SRM 51-70-17, 747-400LCF SRM 51-70-07, 747-
400LCF SRM 51-70-17, 747-400SF SRM 51-70-07, 747-400SF SRM 51-70-17 or 747-SP SRM 51-40-
14, as applicable.
FIGURE 8: RIGHT WING LOWER SKIN PANEL CHANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
59 of 85
BOEING SERVICE BULLETIN 747-57-2332

### Page 60

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
165B10873-7, -27Skin Panel Assy, Lead-
ing Edge Wing
Put / Hold1
3114U9202-24KIT DETAIL - DRAIN
TUBE RETAINER
Locate2
3114U9202-24KIT DETAIL - DRAIN
TUBE RETAINER
Put / Hold
107-HoleDrill / Ream3
and deburr.107-HoleClean4
as necessary. Refer
to SOPM 20-10-06
as an accepted pro-
cedure.
-BMS10-21, TYPE IIIAnti-Static CoatingApply5
Fay surface seal be-
tween mating sur-
face of aft edge of
panel to lower wing
skin with BMS5-95.
165B10873-7, -27Skin Panel Assy, Lead-
ing Edge Wing
Install (Kept)6
into clips of the drain
tube retainers. En-
sure that the out-
board end of the
drain tube extends
past the outboard
edge of the rib. Re-
move sealant as
necessary.
1114U9202-12KIT DETAIL - DRAIN
TUBE
Install (New)7
FIGURE 9: LEFT WING LOWER LEADING EDGE PANEL AND DRAIN TUBE INSTALLATION
(SHEET 1 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 09, 2010
747-57-2332
60 of 85
BOEING SERVICE BULLETIN 747-57-2332

The text continues at https://openairdocs.org/service-documents/boeing/sb-747-57-2332/file/f0fe5e0a8db5.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
