# Boeing Special Attention Service Bulletin 757-23-0107: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0987; AD 2013-01-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 757-23-0107](https://openairdocs.org/service-documents/boeing/sb-757-23-0107.md)
- Title as filed: Service Bulletin
- Pages: 127
- PDF: https://openairdocs.org/files/sha256/11/48/1148b8a2c525e7579538fdc9f9d5cc9f14ed95ed8ad8e8825ededd59bad1c9db
- Page: https://openairdocs.org/service-documents/boeing/sb-757-23-0107/file/1148b8a2c525

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-23-0107
Original Issue: August 24, 2009
Revision 1: May 16, 2012
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment - Audio Entertainment Multiplexer
Power Relay Wiring Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2009 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner™,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and Boeing
liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection
with this document unless provided in writing by Boeing. BOEING is a trademark of Boeing Management
Company.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
1 of 127
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
2 of 127
BOEING SERVICE BULLETIN 757-23-0107
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 2
B. Concurrent Requirements ...................................... 1 2
C. Reason ................................................ 1 2
D. Description .............................................. 1 3
E. Compliance .............................................. 1 3
F. Approval ............................................... 1 4
G. Manpower .............................................. 1 4
H. Weight and Balance Changes .................................... 1 8
I. Electrical Load Data ......................................... 1 8
J. References .............................................. 1 8
1. Existing Data: ......................................... 1 8
2. Data Supplied with this Service Bulletin: ........................... 1 8
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 9
K. Publications Affected ........................................ 1 9
L. Interchangeability and Intermixability of Parts ........................... 1 9
M. Software Accomplishment Summary ................................ 1 9
2. MATERIAL INFORMATION ........................................ 2 1
A. Material - Price and Availability ................................... 2 1
B. Industry Support Information .................................... 2 1
C. Parts Necessary for Each Airplane ................................. 2 1
1. Kits/Parts ............................................ 2 1
2. Parts and Materials Supplied by the Operator ........................ 2 1
3. Parts Modified and Reidentified ................................ 3 0
4. Parts Removed and Not Replaced .............................. 3 1
D. Parts Necessary to Change Spares ................................. 3 1
E. Special Tooling - Price and Availability ............................... 3 1
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 1
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 3
A. GENERAL INFORMATION ..................................... 3 3
B. WORK INSTRUCTIONS ....................................... 3 3
FIGURE 1: REMOVAL OF THE E4-1 ELECTRONICS SHELF [Group 1-4] ............... 4 1
FIGURE 2: REMOVAL OF THE FLOOR PANEL AND COVERS [Group 1-4] .............. 4 4
FIGURE 3: CHANGES TO WIRE BUNDLE W1260 AT THE P36 PANEL [Group 1-4] ......... 4 6
FIGURE 4: REMOVE RELAY, RELAY SOCKET AND DECAL [Group 1-4] ............... 4 7
FIGURE 5: INSTALL RELAY SOCKET AND DECAL [Group 1-4] .................... 5 0
FIGURE 6: WIRE ROUTING FOR WIRE BUNDLE W1260 IN THE P36 PANEL [Group 1-4] ...... 5 2
FIGURE 7: WIRE ROUTING FOR WIRE BUNDLE W1260 IN THE P36 PANEL [Group 5-8] ...... 5 3
FIGURE 8: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL [Group 1-3] .......... 5 4
FIGURE 9: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL [Group 4] ........... 5 6
FIGURE 10: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL [Group 5-8] .......... 5 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
3 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 4

FIGURE 11: WIRE ROUTING FOR WIRE BUNDLE W1165 ON THE E4-1 ELECTRONICS SHELF [Group
1-4] ............................................... 6 0
FIGURE 12: CHANGES TO WIRE BUNDLE W1165 ON THE E4-1 ELECTRONICS SHELF [Group 1-4] . 61
FIGURE 13: WIRE ROUTING FOR WIRE BUNDLE W1161 ON THE E4-4 ELECTRONICS SHELF [Group
5-7] ............................................... 6 3
FIGURE 14: WIRE ROUTING FOR WIRE BUNDLE W1161 ON THE E4-4 ELECTRONICS SHELF [Group
8 ]  ................................................ 6 4
FIGURE 15: CHANGES TO WIRE BUNDLE W1161 ON THE E4-4 ELECTRONICS SHELF [Group 5-7] . 65
FIGURE 16: CHANGES TO WIRE BUNDLE W1161 ON THE E4-4 ELECTRONICS SHELF [Group 8] . 67
FIGURE 17: WIRE ROUTING FOR WIRE BUNDLE W4424 BETWEEN THE P36 PANEL AND THE P37
PANEL [Group 1] ........................................ 6 9
FIGURE 18: WIRE ROUTING FOR WIRE BUNDLE W4424 BETWEEN THE P36 PANEL AND THE P37
PANEL [Group 2] ........................................ 7 2
FIGURE 19: WIRE ROUTING FOR WIRE BUNDLE W4424 BETWEEN THE P36 PANEL AND THE P37
PANEL [Group 3] ........................................ 7 5
FIGURE 20: WIRE ROUTING FOR WIRE BUNDLE W4424 BETWEEN THE P36 PANEL AND THE P37
PANEL [Group 4] ........................................ 7 8
FIGURE 21: CHANGES TO WIRE BUNDLE W4424 BETWEEN THE P36 PANEL AND THE P37 PANEL
[Group 1-3] ........................................... 8 1
FIGURE 22: CHANGES TO WIRE BUNDLE W4424 BETWEEN THE P36 PANEL AND THE P37 PANEL
[Group 4] ............................................ 8 3
FIGURE 23: WIRE ROUTING FOR WIRE BUNDLE W4471 BETWEEN THE P36 PANEL AND THE E4-1
ELECTRONICS SHELF [Group 1] ............................... 8 5
FIGURE 24: WIRE ROUTING FOR WIRE BUNDLE W4471 BETWEEN THE P36 PANEL AND THE E4-1
ELECTRONICS SHELF [Group 2] ............................... 8 9
FIGURE 25: WIRE ROUTING FOR WIRE BUNDLE W4471 BETWEEN THE P36 PANEL AND THE E4-1
ELECTRONICS SHELF [Group 3] ............................... 9 3
FIGURE 26: WIRE ROUTING FOR WIRE BUNDLE W4471 BETWEEN THE P36 PANEL AND THE E4-1
ELECTRONICS SHELF [Group 4] ............................... 9 7
FIGURE 27: CHANGES TO WIRE BUNDLE W4471 BETWEEN THE P36 PANEL AND THE E4-1
ELECTRONICS SHELF [Group 1-3] ............................. 1 0 1
FIGURE 28: CHANGES TO WIRE BUNDLE W4471 BETWEEN THE P36 PANEL AND THE E4-1
ELECTRONICS SHELF [Group 4] .............................. 1 0 2
FIGURE 29: WIRE ROUTING FOR WIRE BUNDLE W4477 BETWEEN THE P36 PANEL AND THE E4-4
ELECTRONICS SHELF [Group 5] .............................. 1 0 3
FIGURE 30: WIRE ROUTING FOR WIRE BUNDLE W4477 BETWEEN THE P36 PANEL AND THE E4-4
ELECTRONICS SHELF [Group 6] .............................. 1 0 6
FIGURE 31: WIRE ROUTING FOR WIRE BUNDLE W4477 BETWEEN THE P36 PANEL AND THE E4-4
ELECTRONICS SHELF [Group 7-8] ............................. 1 0 9
FIGURE 32: CHANGES TO WIRE BUNDLE W4477 BETWEEN THE P36 PANEL AND THE E4-4
ELECTRONICS SHELF [Group 5-8] ............................. 1 1 2
FIGURE 33: INSTALLATION OF E4-1 ELECTRONICS SHELF [Group 1-4] .............. 1 1 4
FIGURE 34: INSTALLATION OF RELAY K10599 IN THE P36 PANEL [Group 1-4] ........... 1 1 7
FIGURE 35: REMOVAL OF RELAY K10599 IN THE P36 PANEL [Group 5-8] ............. 1 2 0
FIGURE 36: INSTALLATION OF RELAY K10599 IN THE P36 PANEL [Group 5-8] ........... 1 2 3
FIGURE 37: INSTALLATION OF FLOOR PANELS AND COVERS [Group 1-4] ............. 1 2 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
4 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 757-23-0107Original Issue: August 24, 2009
Revision 1: May 16, 2012
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment - Audio Entertainment Multiplexer
Power Relay Wiring Change
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed in accordance with the original issue of this service bulletin.
REASON FOR REVISION
This revision is sent to correct discrepancies found during validation of the original issue of this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane NT406 by Service
Bulletin 757-23-0107 Original Issue before the release of Revision 1 of this service bulletin. The change completed
on airplane NT406 by Service Bulletin 757-23-0107 Original Issue is equivalent to the Revision 1 of this service
bulletin. Airplane NT406 has the configuration of a Group 3 airplane.
These sections were changed:
1. In the Summary Action and Paragraph 1.D., Description, added a new paragraph for Group 4 airplanes
and removed a sentence from the paragraph for Group 5-8 airplanes.
2. In Paragraph 1.J., References, added Standard Wiring Practices Manual (SWPM) reference 20-20-10
and removed Aircraft Maintenance Manual (AMM) reference 31-01-36.
3. In Paragraph 3.B., Work Instructions:
a. Changed Part 4 to show the work necessary for each group.
b. Changed the work instructions for Group 4 airplanes.
c. Changed AMM reference in Part 1 and Part 5.
4. In FIGURE 2 and FIGURE 37 changed the quantity of parts.
5. In FIGURE 12, changed ground location in the illustration.
6. In FIGURE 23 - 26, changed the locator illustration.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
5 of 127

### Page 6

7. In FIGURE 29, changed illustrations.
8. In FIGURE 30, changed illustrations.
9. In FIGURE 31, changed illustrations.
10. In FIGURE 33, Flagnote table, footnotes:
a. Footnote (a), changed cleaning method from 3 to 1.
b. Footnote (b), changed SWPM reference.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
August 24, 2009Original Issue:
May 16, 2012Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
6 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 7

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-23-0107Original Issue: August 24, 2009
Revision 1: May 16, 2012
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment - Audio Entertainment Multiplexer
Power Relay Wiring Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to make changes to the In-Flight Entertainment (IFE)System. These
changes will remove the 115 volt power supply from the IFE system Seat Electronics Boxes (SEBs) when the
Entertainment Control Switch S10479 at the P21 FWD Attendant Panel is in the OFF position. If you do not do
the changes given in this service bulletin, the power supply cannot be removed from the SEBs when the
entertainment control switch is in the OFF position. This could cause a shock hazard to maintenance personnel.
Boeing received a report from an operator that the cabin crew noticed an electrical burning smell from the seat
track cover. An investigation found that there was an indication of heat damage to the wires that connect to the
SEBs. This damage was caused by electrical arcing at a SEB terminator.
Boeing reviewed the operator's investigation and found that the Entertainment Control Switch S10479 at the
P21 Attendant Panel had no effect on the removal of electrical power from the SEBs. Accomplishment of this
service bulletin will let the Entertainment Control Switch S10479 control the electrical power to the SEBs.
Boeing Service Related Problem (SRP) 757-SRP-23-0075 is related to this service bulletin.
Fleet Team Digest (FTD) 757 FTD 23-07001 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane NT406 by Service
Bulletin 757-23-0107 Original Issue before the release of Revision 1 of this service bulletin. The change completed
on airplane NT406 by Service Bulletin 757-23-0107 Original Issue is equivalent to the Revision 1 of this service
bulletin. Airplane NT406 has the configuration of a Group 3 airplane.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
7 of 127

### Page 8

ACTION (PRR 54530-284RS)
Group 1-3:
Get access to the main equipment center. Install a new relay and marker and make changes to wire bundle
W1260 in the P36 panel. Make changes to wire bundle W1165 on the E4-1 electronics shelf. Make changes to
wire bundles W4424/W4473 between the P36 and the P37 panels. Make changes to wire bundle W4471 between
the P36 panel and the E4-1 electronics shelf. Do a continuity check of the new and changed wires.
Group 4:
Get access to the main equipment center. Install a new relay and marker and make changes to wire bundle
W1260 in the P36 panel. Make changes to wire bundle W1165 on the E4-1 electronics shelf. Make changes to
wire bundles W4424/W4473 between the P36 and the P37 panels. Make changes to wire bundle W4471 between
the P36 panel and the E4-1 electronics shelf. Do a continuity check of the new and changed wires. Do a test of
the Entertainment Control Switch.
Group 5-8:
Get access to the main equipment center. Make changes to wire bundle W1260 in the P36 panel. Make changes
to wire bundle W1161 on the E4-4 electronics shelf. Make changes to wire bundle W4477 between the P36
panel and the E4-4 electronics shelf. Do a continuity check of the new and changed wires. Do a test of the
Entertainment Control Switch.
EFFECTIVITY
757-200 Airplanes. Refer to Paragraph 1.A., Effectivity, Airplanes for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 24 months after the Revision
1 date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
8 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 9 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
E4-1 ELECTRONICS SHELF
-CHANGE WIRE BUNDLE
W1165 (GROUP 1-4)
MAIN EQUIPMENT CENTER:
-CHANGE WIRE BUNDLE W4471
(GROUP 1-4)
-CHANGE WIRE BUNDLE W4477
(GROUP 5-8)
MAIN EQUIPMENT CENTER:
-CHANGE WIRE BUNDLES
W4424 AND W4473 (GROUP 1-4)
E4-4 ELECTRONICS SHELF  P36 PANEL:
-CHANGE WIRE BUNDLE  -INSTALL 1 RELAY AND DECAL
W1161 (GROUP 5-8)  (GROUP 1-4)
-CHANGE WIRE BUNDLE W1260
Original Issue: August 24, 2009
Revision 1: May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-23-0107
Work - See page 1 for details.  9 of 127

### Page 10

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
10 of 127
BOEING SERVICE BULLETIN 757-23-0107
BLANK PAGE

### Page 11

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-23-0107
Original Issue: August 24, 2009
Revision 1: May 16, 2012
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment - Audio Entertainment Multiplexer
Power Relay Wiring Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624N001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 54530-284RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
757 Airplanes with different wiring configuration-1
757 Airplanes with different wiring configuration-2
757 Airplanes with different wiring configuration-3
757 Airplanes with different wiring configuration-4
757 Airplanes with different wiring configuration-5
757 Airplanes with different wiring configuration-6
757 Airplanes with different wiring configuration-7
757 Airplanes with different wiring configuration-8
Airplane Models:
757-200
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
11 of 127

### Page 12

GroupVariable Number
1NA237 - NA239
4NA301 - NA305
2NB581 - NB583
5ND241 - ND248
6NE311 - NE319
7NE320 - NE322
8NE323
7NE324 - NE325
3NT401 - NT409
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to make changes to the In-flight Entertainment (IFE)System.
These changes will remove the 115 volt power supply from the IFE system Seat Electronics Boxes
(SEBs) when the Entertainment Control Switch S10479 at the P21 Fwd Attendant Panel is in the OFF
position. If you do not do the changes given in this service bulletin, the power supply cannot be removed
from the SEBs when the entertainment control switch is in the OFF position. This could cause a shock
hazard to maintenance personnel.
Boeing received a report from an operator that the cabin crew noticed an electrical burning smell from
the seat track cover. An investigation found that there was an indication of heat damage to the wires
that connect to the SEBs. This damage was caused by electrical arcing at a SEB terminator.
Boeing reviewed the operator's investigation and found that the Entertainment Control Switch S10479
at the P21 Attendant Panel had no effect on the removal of electrical power from the SEBs.
Accomplishment of this service bulletin will let the Entertainment Control Switch S10479 control the
electrical power to the SEBs.
Boeing Service Related Problem (SRP) 757-SRP-23-0075 is related to this service bulletin.
Fleet Team Digest (FTD) 757 FTD 23-07001 is related to this service bulletin.
Revision 1 is sent to correct discrepancies found during the validation of the original issue of this service
bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
12 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 13

As a part of a service bulletin validation program, this change was completed on airplane NT406 by
Service Bulletin 757-23-0107 Original Issue before the release of Revision 1 of this service bulletin.
The change completed on airplane NT406 by Service Bulletin 757-23-0107 Original Issue is equivalent
to the Revision 1 of this service bulletin. Airplane NT406 has the configuration of a Group 3 airplane.
D. Description
Group 1-3:
Get access to the main equipment center. Install a new relay and marker and make changes to wire
bundle W1260 in the P36 panel. Make changes to wire bundle W1165 on the E4-1 electronics shelf.
Make changes to wire bundles W4424/W4473 between the P36 and the P37 panels. Make changes
to wire bundle W4471 between the P36 panel and the E4-1 electronics shelf. Do a continuity check of
the new and changed wires.
Group 4:
Get access to the main equipment center. Install a new relay and marker and make changes to wire
bundle W1260 in the P36 panel. Make changes to wire bundle W1165 on the E4-1 electronics shelf.
Make changes to wire bundles W4424/W4473 between the P36 and the P37 panels. Make changes
to wire bundle W4471 between the P36 panel and the E4-1 electronics shelf. Do a continuity check of
the new and changed wires. Do a test of the Entertainment Control Switch.
Group 5-8:
Get access to the main equipment center. Make changes to wire bundle W1260 in the P36 panel. Make
changes to wire bundle W1161 on the E4-4 electronics shelf. Make changes to wire bundle W4477
between the P36 panel and the E4-4 electronics shelf. Do a continuity check of the new and changed
wires. Do a test of the Entertainment Control Switch.
Revision 1 - No more work is necessary on airplanes changed in accordance with the original issue of
this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
119757-200
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 24 months after the
Revision 1 date of this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
13 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 14

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Elapsed HoursTask HoursNumber of PersonsTask
3.253.251Open Access
0.500.501FIGURE 1
1.001.001FIGURE 2
0.800.801FIGURE 3
0.250.251FIGURE 4
0.250.251FIGURE 5
5.7011.402FIGURE 6 and FIGURE 8
1.601.601FIGURE 11 and FIGURE 12
3.353.351FIGURE 17 and FIGURE 21
3.653.651FIGURE 23 and FIGURE 27
0.500.501FIGURE 33
0.250.251FIGURE 34
1.001.001FIGURE 37
3.253.251Close Access
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
14 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 15

Group 1:
Elapsed HoursTask HoursNumber of PersonsTask
1.102.202Test
26.4533.25TOTAL FOR EACH AIRPLANE
Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
3.253.251Open Access
0.500.501FIGURE 1
1.001.001FIGURE 2
0.800.801FIGURE 3
0.250.251FIGURE 4
0.250.251FIGURE 5
5.7011.402FIGURE 6 and FIGURE 8
1.601.601FIGURE 11 and FIGURE 12
3.353.351FIGURE 18 and FIGURE 21
3.653.651FIGURE 24 and FIGURE 27
0.500.501FIGURE 33
0.250.251FIGURE 34
1.001.001FIGURE 37
3.253.251Close Access
1.102.202Test
26.4533.25TOTAL FOR EACH AIRPLANE
Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
3.253.251Open Access
0.500.501FIGURE 1
1.001.001FIGURE 2
0.800.801FIGURE 3
0.250.251FIGURE 4
0.250.251FIGURE 5
5.7011.402FIGURE 6 and FIGURE 8
1.601.601FIGURE 11 and FIGURE 12
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
15 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 16

Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
3.353.351FIGURE 19 and FIGURE 21
3.653.651FIGURE 25 and FIGURE 27
0.500.501FIGURE 33
0.250.251FIGURE 34
1.001.001FIGURE 37
3.253.251Close Access
1.102.202Test
26.4533.25TOTAL FOR EACH AIRPLANE
Group 4:
Elapsed HoursTask HoursNumber of PersonsTask
3.253.251Open Access
0.500.501FIGURE 1
1.001.001FIGURE 2
0.800.801FIGURE 3
0.250.251FIGURE 4
0.250.251FIGURE 5
5.7011.402FIGURE 6 and FIGURE 9
1.601.601FIGURE 11 and FIGURE 12
3.553.551FIGURE 20 and FIGURE 22
3.653.651FIGURE 26 and FIGURE 28
0.500.501FIGURE 33
0.250.251FIGURE 34
1.001.001FIGURE 37
3.253.251Close Access
1.102.202Test
26.6533.45TOTAL FOR EACH AIRPLANE
Group 5:
Elapsed HoursTask HoursNumber of PersonsTask
1.401.401Open Access
3.006.002FIGURE 7 and FIGURE 10
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
16 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 17

Group 5:
Elapsed HoursTask HoursNumber of PersonsTask
2.655.302FIGURE 13 and FIGURE 15
3.657.302FIGURE 29 and FIGURE 32
0.250.251FIGURE 35
0.250.251FIGURE 36
1.401.401Close Access
1.102.202Test
13.7024.10TOTAL FOR EACH AIRPLANE
Group 6:
Elapsed HoursTask HoursNumber of PersonsTask
1.401.401Open Access
3.006.002FIGURE 7 and FIGURE 10
2.655.302FIGURE 13 and FIGURE 15
3.657.302FIGURE 30 and FIGURE 32
0.250.251FIGURE 35
0.250.251FIGURE 36
1.401.401Close Access
1.102.202Test
13.7024.10TOTAL FOR EACH AIRPLANE
Group 7:
Elapsed HoursTask HoursNumber of PersonsTask
1.401.401Open Access
3.006.002FIGURE 7 and FIGURE 10
2.655.302FIGURE 13 and FIGURE 15
3.657.302FIGURE 31 and FIGURE 32
0.250.251FIGURE 35
0.250.251FIGURE 36
1.401.401Close Access
1.102.202Test
13.7024.10TOTAL FOR EACH AIRPLANE
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
17 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 18

Group 8:
Elapsed HoursTask HoursNumber of PersonsTask
1.401.401Open Access
3.006.002FIGURE 7 and FIGURE 10
2.802.801FIGURE 14 and FIGURE 16
3.657.302FIGURE 31 and FIGURE 32
0.250.251FIGURE 35
0.250.251FIGURE 36
1.401.401Close Access
1.102.202Test
13.8521.60TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+200.0+0.4All
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 54530-284RS
b. Boeing Service Related Problem (SRP) 757-SRP-23-0075
c. Standard Overhaul Practices Manual (SOPM) 20-50-05
d. Standard Wiring Practices Manual (SWPM) 20-00-13, 20-10-11, 20-10-12, 20-10-19, 20-20-00,
20-20-10, 20-20-11, 20-30-12, 20-30-16, 20-60-06, 20-61-11, 20-81-12, 20-81-22
e. 757 Aircraft Maintenance Manual (AMM) 06-41-00, 20-41-01, 23-34-00, 24-22-00, 25-21-02,
25-50-03
f. 757 Fleet Team Digest (FTD) 23-07001
g. 757 Wiring Diagram Manual (WDM) 23-31-18, 23-34-12, 23-34-15
2. Data Supplied with this Service Bulletin:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
18 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 19

3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
ELECTRICAL CABLE INSTL E3 & E4 ELEX RACKS288N4330
ELECTRICAL CABLE INSTL R. S. ELECTRONICS BAY STA 395
TO STA 560
288N4392
WIRE BUNDLE INSTL R. SIDE FLOOR BEAMS STA 440 - STA
660
288N4398
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
Chapter-SectionPublication
23-31, 23-34757 Wiring Diagram Manual
23-31, 23-34757 System Schematic Manual
1. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
19 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 20

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
20 of 127
BOEING SERVICE BULLETIN 757-23-0107
BLANK PAGE

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
NOTE: Operators need to purchase the parts from the tables below to make the Top Kit for their
airplane.
Group 1-3:
NameTop Kit Number
TOP KIT - MUX POWER RELAY WIRING CHANGE012N8926-21
Group 4:
NameTop Kit Number
TOP KIT - MUX POWER RELAY WIRING CHANGE012N8926-24
Group 5-7:
NameTop Kit Number
WIRE KIT- IFE AUDIO SWITCH INEFFECTIVE TO
TURN OFF AC POWER TO SEATS
280N3367-2
Group 8:
NameTop Kit Number
WIRE KIT- IFE AUDIO SWITCH INEFFECTIVE TO
TURN OFF AC POWER TO SEATS
280N3367-3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
21 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 22

Kit 012N8926
NotesExisting Part
Number
NameQTYNew Part Number
-24-21
TOP KIT - MUX
POWER RELAY
WIRING CHANGE
.-012N8926-21
TOP KIT - MUX
POWER RELAY
WIRING CHANGE
-.012N8926-24
SUB KIT - EQUIP-
MENT/WIRE IN-
STALLATION, IFE
SWITCH TURN
OFF AC POWER
TO SEATS
11012N0059-1
WIRE KIT - IFE
AUDIO SWITCH
INEFFECTIVE TO
TURN OFF AC
POWER TO
SEATS
.1280N3367-1
WIRE KIT - IFE
AUDIO SWITCH
INEFFECTIVE TO
TURN OFF AC
POWER TO
SEATS
1.280N3367-4
Kit 012N0059
NotesExisting Part
Number
NameQTYNew Part Number
-1
SUB KIT - EQUIP-
MENT/WIRE IN-
STALLATION, IFE
SWITCH TURN
OFF AC POWER
TO SEATS
-012N0059-1
(a)VINYL DECAL1BAC27NEX2267
(a)RELAY1BACR13CG2AB
(a) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707
Seattle, WA. 94025
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
22 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 23

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-102-101-4-3-2-1
WIRE KIT - IFE
AUDIO SWITCH
INEFFECTIVE TO
TURN OFF AC
POWER TO
SEATS
.....-280N3367-1
ASSY - W1161.-..1.280N3367-101
ASSY - W1161-..1..280N3367-102
ASSY - W1165..1..1280N3367-103
ASSY - W1260..1..1280N3367-104
ASSY - W1260...11.280N3367-105
ASSY - W4424.....1280N3367-106
ASSY - W4424..1...280N3367-107
ASSY - W4471..1..1280N3367-108
ASSY - W4473..1..1280N3367-109
ASSY - W4477...11.280N3367-110
TOP KIT - IFE AU-
DIO SWITCH INEF-
FECTIVE TO
TURN OFF AC
POWER TO
SEATS
....-.280N3367-2
TOP KIT - IFE AU-
DIO SWITCH INEF-
FECTIVE TO
TURN OFF AC
POWER TO
SEATS
...-..280N3367-3
WIRE KIT - IFE
AUDIO SWITCH
INEFFECTIVE TO
TURN OFF AC
POWER TO
SEATS
..-...280N3367-4
ASSY - W1161.-..1.280N3367-101
(b) (e)LOCKSTITCH -
WHITE
.1....280N3367-10101
(c) (f)ID TAPE SM1.1....280N3367-10102
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
23 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 24

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-102-101-4-3-2-1
(c) (f)ID TAPE SM15.1....280N3367-10103
WIRE LIST.1....280N3367-101W
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0276-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0277-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0278-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0279-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0281-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 60 INCHES,
IDENTIFIED AS
W1161-0013-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 60 INCHES,
IDENTIFIED AS
W1161-0014-20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
ASSY - W1161-..1..280N3367-102
(d) (e)LOCKSTITCH -
WHITE
1.....280N3367-10201
WIRE LIST1.....280N3367-102W
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0276-20
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0277-20
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0278-20
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 12 INCHES,
IDENTIFIED AS
W1161-0279-20
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
20
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
24 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 25

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-102-101-4-3-2-1
ASSY - W1165..1..1280N3367-103
ASSY - W1260..1..1280N3367-104
ASSY - W1260...11.280N3367-105
ASSY - W4424.....1280N3367-106
ASSY - W4424..1...280N3367-107
ASSY - W4471..1..1280N3367-108
ASSY - W4473..1..1280N3367-109
ASSY - W4477...11.280N3367-110
(a) (f)SPLICE, WIRE,
CLOSED END
.3....35115
(a) (g)CONTACT, PIN912....BACC47CN1S
(a) (g)CONTACT, PIN55....BACC47DE7A
(a) There are more parts than are necessary.
(b) BMS 13-54, Type 3, Class 1, Color White, Length 70 inches.
(c) Sleeve, Identification, Heat Shrinkable, make from BMS13-69D044B.
(d) BMS 13-54, Type 3, Class 1, Color White, Length 30 inches.
(e) Gudebrod Inc (V82110), 274 Shoemaker Road, Pottstown, PA 19494
(f) Tyco Electronics/Raychem DBA (V06090), Raychem Div. Electronics, 300 Constitution Drive, Menlo Park,
CA 94025-1164
(g) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707 Seattle, WA. 98124-2499
(h) Refer to SWPM 20-00-13 for optional wire.
(i) See the Qualified Products List at the end of the Boeing Materials Specifications (BMS) for supplier data.
Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-108-107-106-105-104-103
ASSY - W1165.....-280N3367-103
ASSY - W1260....-.280N3367-104
ASSY - W1260...-..280N3367-105
ASSY - W4424..-...280N3367-106
ASSY - W4424.-....280N3367-107
ASSY - W4471-.....280N3367-108
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
25 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 26

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-108-107-106-105-104-103
ASSY - W1165.....-280N3367-103
(b) (h)LOCKSTITCH -
WHITE
.....1280N3367-10301
WIRE LIST.....1280N3367-103W
(j) (k) (l)WIRE, 12 INCHES,
IDENTIFIED AS
W1165-0335-22
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 12 INCHES,
IDENTIFIED AS
W1165-0336-22
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
22
ASSY - W1260....-.280N3367-104
(b) (h)LOCKSTITCH -
WHITE
....1.280N3367-10401
(c) (i)ID TAPE SM22....1.280N3367-10402
(d) (i)CONN ID TAPE
D1349
....1.280N3367-10403
WIRE LIST....1.280N3367-104W
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6205-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6206-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6207-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6208-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6209-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
26 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 27

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-108-107-106-105-104-103
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6210-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6689-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6690-
22
....1.BMS 13-48, TYPE
10, CLASS 1, AWG
22
ASSY - W1260...-..280N3367-105
(e) (h)LOCKSTITCH -
WHITE
...1..280N3367-10501
WIRE LIST...1..280N3367-105W
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6207-
22
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6208-
22
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6462-
22
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 120 INCH-
ES, IDENTIFIED
AS W1260-6463-
22
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
22
ASSY - W4424..-...280N3367-106
(f) (h)LOCKSTITCH -
BLUE
..1...280N3367-10601
(c) (i)ID TAPE SP20004..1...280N3367-10602
(c) (i)ID TAPE SP20006..1...280N3367-10603
WIRE LIST..1...280N3367-106W
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
27 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 28

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-108-107-106-105-104-103
(j) (k) (l)WIRE, 140 INCH-
ES, IDENTIFIED
AS W4424-0050-
20
..1...BMS 13-48, TYPE
10, CLASS 1, AWG
20
(j) (k) (l)WIRE, 140 INCH-
ES, IDENTIFIED
AS W4424-0051-
20
..1...BMS 13-48, TYPE
10, CLASS 1, AWG
20
ASSY - W4424.-....280N3367-107
(f) (h)LOCKSTITCH -
BLUE
.1....280N3367-10701
(c) (i)ID TAPE SP20004.1....280N3367-10702
(c) (i)ID TAPE SP20006.1....280N3367-10703
WIRE LIST.1....280N3367-107W
(j) (k) (l)WIRE, 140 INCH-
ES, IDENTIFIED
AS W4424-0050-
20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
20
(j) (k) (l)WIRE, 140 INCH-
ES, IDENTIFIED
AS W4424-0050-
20
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
2
ASSY - W4471-.....280N3367-108
(g) (h)LOCKSTITCH -
RED
1.....280N3367-10801
WIRE LIST1.....280N3367-108W
(j) (k) (l)WIRE, 170 INCH-
ES, IDENTIFIED
AS W4471-0581-
22
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
22
(j) (k) (l)WIRE, 170 INCH-
ES, IDENTIFIED
AS W4471-00582-
22
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
22
(a) (j)TERMINAL.3....324484
(a) (i)SPLICE, WIRE,
CLOSED END
....2.35115
(a) (j)CONTACT, PIN533...BACC47CN1S
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
28 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 29

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-108-107-106-105-104-103
(a) (j)CONTACT, SOCK-
ET
...585BACC47CP1S
(a) (j)CONTACT, PIN.....4BACC47DE7A
(a) (j)CONTACT, SOCK-
ET
...59.BACC47DJ1
(a) (j)RELAY SOCKET....1.BACS16W1A
(a) (i)SPLICE.33...D436-38
(a) There are more parts than are necessary.
(b) BMS 13-54, Type 3, Class 1, Color White, Length 30 inches.
(c) Sleeve, Identification, Heat Shrinkable, make from BMS13-69D044B.
(d) Tape, ID, make from BACT19C-T (BACT19CT).
(e) BMS 13-54, Type 3, Class 1, Color White, Length 130 inches.
(f) BMS 13-54, Type 3, Class 1, Color Blue, Length 140 inches.
(g) BMS 13-54, Type 3, Class 1 FC Lacing Tape, Flat Braid, Color Red, Length 180 inches.
(h) Gudebrod Inc (V82110), 274 Shoemaker Road, Pottstown, PA 19494
(i) Tyco Electronics/Raychem DBA (V06090), Raychem Div. Electronics, 300 Constitution Drive, Menlo Park,
CA 94025-1164
(j) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707 Seattle, WA. 98124-2499
(k) Refer to SWPM 20-00-13 for optional wire.
(l) See the Qualified Products List at the end of the Boeing Materials Specifications (BMS) for Supplier Data.
Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-110-109
ASSY - W4473.-280N3367-109
ASSY - W4477-.280N3367-110
ASSY - W4473.-280N3367-109
(b) (e)ID Tape - W4473-
0328-18
.2280N3367-10901
(c) (f)LOCKSTITCH -
GREEN
.1280N3367-10902
ASSY - W4477-.280N3367-110
(d) (f)LOCKSTITCH -
BLUE
1.280N3367-11001
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
29 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 30

Kit 280N3367
NotesExisting Part
Number
NameQTYNew Part Number
-110-109
WIRE LIST1.280N3367-110W
(g) (h)
(i)
WIRE, 170 INCH-
ES, IDENTIFIED
AS W4477-0447-
20
1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 170 INCH-
ES, IDENTIFIED
AS W4477-0448-
20
1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 170 INCH-
ES, IDENTIFIED
AS W4477-0449-
20
1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
(g) (h)
(i)
WIRE, 170 INCH-
ES, IDENTIFIED
AS W4477-0450-
20
1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
(a) (g)CONTACT, PIN5.BACC47CN1S
(a) (g)CONTACT, SOCK-
ET
5.BACC47CP1S
(a) There are more parts than are necessary.
(b) Tape, ID, make from BACT19C-T (BACT19CT).
(c) BMS 13-54, Type 3, Class 1, Color Green, Length 24 inches.
(d) BMS 13-54, Type 3, Class 1, Color Green, Length 170 inches.
(e) Tyco Electronics/Raychem DBA (V06090), Raychem Div. Electronics, 300
Constitution Drive, Menlo Park, CA 94025-1164
(f) Gudebrod Inc (V82110), 274 Shoemaker Road, Pottstown, PA 19494
(g) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707 Seattle,
WA. 98124-2499
(h) Refer to SWPM 20-00-13 for optional wire.
(i) See the Qualified Products List at the end of the Boeing Materials Specifications
(BMS) for supplier data.
3. Parts Modified and Reidentified
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
30 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 31

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
31 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 32

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
32 of 127
BOEING SERVICE BULLETIN 757-23-0107
BLANK PAGE

### Page 33

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
B. WORK INSTRUCTIONS
Part 1 - Access Requirements
1. Group 1-4:
Do the steps that follow to get access to change area:
a. Remove electrical power from the airplane. Refer to 757 AMM 24-22-00 as an accepted
procedure.
b. At the lower forward fuselage, open the forward cargo and main electronics compartment
doors. Refer to 757 AMM 06-41-00 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
33 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 34

c. In the main electronics compartment, remove and keep the Line Replacement Units (LRU)s
from the E4-1 electronics shelf. Refer to 757 AMM 20-41-01 as an accepted procedure.
d. In the forward cargo compartment, remove and keep the forward bulkhead lining. Refer to
757 AMM 25-50-03 as an accepted procedure.
e. Disconnect electrical connectors from disconnect bracket AE0401 at the E4-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
f. Remove and keep the E4-1 electronics shelf from the E4 electronics rack in accordance with
FIGURE 1.
g. Remove and keep the disconnect panel covers and floor panels adjacent to the P37 panel in
accordance with FIGURE 2.
h. Open the panel door to get access to the P36 panel. Refer to 757 AMM 25-50-03 as an
accepted procedure.
i. Open the P36 panel assembly door to get access to the panel wiring. Refer to 757 AMM
25-50-03 as an accepted procedure.
j. Move the P71 panel, if necessary, to get access to the wire bundles.
2. Group 5-8:
Do the steps that follow to get access to change area:
a. Remove electrical power from the airplane. Refer to 757 AMM 24-22-00 as an accepted
procedure.
b. At the lower forward fuselage, open the forward cargo door. Refer to 757 AMM 06-41-00 as
an accepted procedure.
c. In the forward cargo compartment, remove and keep the forward bulkhead lining. Refer to
757 AMM 25-50-03 as an accepted procedure.
d. Open the panel door to get access to the P36 panel. Refer to 757 AMM 25-50-03 as an
accepted procedure.
e. Open the P36 panel assembly door to get access to the panel wiring. Refer to 757 AMM
25-50-03 as an accepted procedure.
f. Move the P71 panel, as necessary, to get access to the wire bundles.
Part 2 - Wire Changes
1. Group 1:
Do the wire changes that follow:
a. At the P36 panel, plate D, make changes to wire bundle W1260 in accordance with FIGURE
3.
b. At the P36 panel, plate D, remove relay, relay socket and decal in accordance with FIGURE
4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
34 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 35

c. At the P36 panel, plate A, install new relay socket and decal in accordance with FIGURE 5.
d. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 6 and
FIGURE 8.
e. Wire changes for wire bundle W1165 on the E4-1 electronics shelf in accordance with FIGURE
11 and FIGURE 12.
f. Wire changes to wire bundles W4424/W4473 between the P36 panel and the P37 panel in
accordance with FIGURE 17 and FIGURE 21.
g. Wire changes to wire bundle W4471 between the P36 panel and the E4-1 electronics shelf
in accordance with FIGURE 23 and FIGURE 27.
2. Group 2:
Do the wire changes that follow:
a. At the P36 panel, plate D, make changes to wire bundle W1260 in accordance with FIGURE
3.
b. At the P36 panel, plate D, remove relay, relay socket and decal in accordance with FIGURE
4.
c. At the P36 panel, plate A, install new relay socket and decal in accordance with FIGURE 5.
d. Wire changes for wire bundle W1260 in the P36 panel in accordance FIGURE 6 and FIGURE
8.
e. Wire changes for wire bundle W1165 on the E4-1 electronics shelf in accordance with FIGURE
11 and FIGURE 12.
f. Wire changes to wire bundles W4424/W4473 between the P36 panel and the P37 panel in
accordance with FIGURE 18 and FIGURE 21.
g. Wire changes to wire bundle W4471 between the P36 panel and the E4-1 electronics shelf
in accordance with FIGURE 24 and FIGURE 27.
3. Group 3:
Do the wire changes that follow:
a. At the P36 panel, plate D, make changes to wire bundle W1260 in accordance with FIGURE
3.
b. At the P36 panel, plate D, remove relay, relay socket and decal in accordance with FIGURE
4.
c. At the P36 panel, plate A, install new relay socket and decal in accordance with FIGURE 5.
d. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 6 and
FIGURE 8.
e. Wire changes for wire bundle W1165 on the E4-1 electronics shelf in accordance with FIGURE
11 and FIGURE 12.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
35 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 36

f. Wire changes to wire bundles W4424/W4473 between the P36 panel and the P37 panel in
accordance with FIGURE 19 and FIGURE 21.
g. Wire changes to wire bundle W4471 between the P36 panel and the E4-1 electronics shelf
in accordance with FIGURE 25 and FIGURE 27.
4. Group 4:
Do the wire changes that follow:
a. At the P36 panel, plate D, make changes to wire bundle W1260 in accordance with FIGURE
3.
b. At the P36 panel, plate D, remove relay, relay socket and decal in accordance with FIGURE
4.
c. At the P36 panel, plate A, install new relay socket and decal in accordance with FIGURE 5.
d. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 6 and
FIGURE 9.
e. Wire changes for wire bundle W1165 on the E4-1 electronics shelf in accordance with FIGURE
11 and FIGURE 12 .
f. Wire changes to wire bundles W4424/W4473 between the P36 panel and the P37 panel in
accordance with FIGURE 20 and FIGURE 22.
g. Wire changes to wire bundle W4471 between the P36 panel and the E4-1 electronics shelf
in accordance with FIGURE 26 and FIGURE 28.
5. Group 5:
Do the wire changes that follow:
a. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 7 and
FIGURE 10.
b. Wire changes for wire bundle W1161 on the E4-4 electronics shelf in accordance with FIGURE
13 and FIGURE 15.
c. Wire changes to wire bundles W4477 between the P36 panel and the E4-4 electronics shelf
in accordance with FIGURE 29 and FIGURE 32.
6. Group 6:
Do the wire changes that follow:
a. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 7 and
FIGURE 10.
b. Wire changes for wire bundle W1161 on the E4-4 electronics shelf in accordance with FIGURE
13 and FIGURE 15.
c. Wire changes to wire bundles W4477 between the P36 panel and the E4-4 electronics shelf
in accordance with FIGURE 30 and FIGURE 32.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
36 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 37

7. Group 7:
Do the wire changes that follow:
a. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 7 and
FIGURE 10.
b. Wire changes for wire bundle W1161 on the E4-4 electronics shelf in accordance with FIGURE
13 and FIGURE 15.
c. Wire changes to wire bundles W4477 between the P36 panel and the E4-4 electronics shelf
in accordance with FIGURE 31 and FIGURE 32.
8. Group 8:
Do the wire changes that follow:
a. Wire changes for wire bundle W1260 in the P36 panel in accordance with FIGURE 7 and
FIGURE 10.
b. Wire changes for wire bundle W1161 on the E4-4 electronics shelf in accordance with FIGURE
14 and FIGURE 16.
c. Wire changes to wire bundles W4477 between the P36 panel and the E4-4 electronics shelf
in accordance with FIGURE 31 and FIGURE 32.
Part 3 - Continuity Test
1. Group 1-4:
Do the steps that follow:
a. Install the kept E4-1 electronics shelf onto the E4 electronics rack in accordance with FIGURE
33.
b. Connect electrical connectors to the disconnect bracket AE0401 at the E4-1 electronics shelf.
Refer to SWPM 20-60-06 as an accepted procedure.
c. Do a continuity check of the new and changed wires.
d. Install kept Line Replacement Units (LRU)s at the E4-1 electronics shelf. Refer to 757 AMM
20-41-01 as an accepted procedure.
e. At the P36 panel, Plate A, install new relay K10599 at relay socket D1349 in accordance with
FIGURE 34.
2. Group 5-8:
Do the steps that follow:
a. At the P36 panel, Plate A, remove and keep relay K10599 from relay socket D1349 in
accordance with FIGURE 35.
b. Do a continuity check of the new and changed wires.
c. At the P36 panel, Plate A, install kept relay K10599 at relay socket D1349 in accordance with
FIGURE 36.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
37 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 38

Part 4 - Function Test
1. Group 1-3:
No work is necessary, Boeing installed provisions only.
2. Group 4:
Do the test that follows:
a. Supply electrical power to the airplane. Refer to 757 AMM 24-22-00 as an accepted procedure.
b. Make sure that Entertainment Control Switch S10479 at the P21 Attendant Panel is in the
OFF position.
c. Remove and keep the sidewall panels at STA 446L and STA 424R. Refer to 757 AMM 25-21-02
as an accepted procedure.
d. Disconnect sidewall connectors D1447 and D1449 at STA 446L and STA 424R, make sure
that there is 0 - 5 volts AC at pin A to ground.
e. Put the Entertainment Control Switch S10479 to the ON position.
f. At sidewall connectors D1447 and D1449, make sure there is 110 - 120 volts AC at pin A to
ground.
g. Put the Entertainment Control Switch S10479 at the P21 Attendant Panel to the OFF position.
h. Connect sidewall connectors D1447 and D1449.
i. Install kept sidewall panels at STA 446L and STA 424R. Refer to 757 AMM 25-21-02 as an
accepted procedure.
j. Do a BITE test of the Passenger Entertainment System. Refer to 757 AMM 23-34-00 as an
accepted procedure.
3. Group 5:
Do the test that follows:
a. Supply electrical power to the airplane. Refer to 757 AMM 24-22-00 as an accepted procedure.
b. Make sure that Entertainment Control Switch S10479 at the P21 Attendant Panel is in the
OFF position.
c. Remove and keep the sidewall panels at STA 810L, STA 810R, STA 1250L and STA 1250R.
Refer to 757 AMM 25-21-02 as an accepted procedure.
d. Disconnect sidewall connectors D7793, D7798, D7802 and D7804 at STA 810L, STA 810R,
STA 1250L and STA 1250R, make sure that there is 0 - 5 volts AC at pin 1 to ground.
e. Put the Entertainment Control Switch S10479 to the ON position.
f. At sidewall connectors D7793, D7798, D7802 and D7804, make sure there is 110 - 120 volts
AC at pin A to ground.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
38 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 39

g. Put the Entertainment Control Switch S10479 at the P21 Attendant Panel to the OFF position.
h. Connect sidewall connectors D7793, D7798, D7802 and D7804.
i. Install kept sidewall panels at STA 446L and STA 446R. Refer to 757 AMM 25-21-02 as an
accepted procedure.
j. Do a BITE test of the Passenger Entertainment System. Refer to 757 AMM 23-34-00 as an
accepted procedure.
4. Group 6-8:
Do the test that follows:
a. Supply electrical power to the airplane. Refer to 757 AMM 24-22-00 as an accepted procedure.
b. Make sure that Entertainment Control Switch S10479 at the P21 Attendant Panel is in the
OFF position.
c. Remove and keep the sidewall panels at STA 493L, STA 493R, STA1173L and STA 1173R.
Refer to 757 AMM 25-21-02 as an accepted procedure.
d. Disconnect sidewall connectors D7798, D7794, D7840 and D7802 at STA 493L, STA 493R,
STA 1173L and STA 1173R, make sure that there is 0 - 5 volts AC at pin 1 to ground.
e. Put the Entertainment Control Switch S10479 to the ON position.
f. At sidewall connectors D7798, D7794, D7840 and D7802, make sure there is 110 - 120 volts
AC at pin 1 to ground.
g. Put the Entertainment Control Switch S10479 at the P21 Attendant Panel to the OFF position.
h. Connect sidewall connectors D7798, D7794, D7840 and D7802.
i. Install kept sidewall panels at STA 493L, STA 493R, STA1173L and STA 1173R. Refer to
757 AMM 25-21-02 as an accepted procedure.
j. Do a BITE test of the Passenger Entertainment System. Refer to 757 AMM 23-34-00 as an
accepted procedure.
Part 5 - Close Up
1. Group 1-4:
Do the steps that follow:
a. Install kept disconnect panel covers and floor panels adjacent to the P37 panel in accordance
with FIGURE 37.
b. In the forward cargo compartment, install kept forward bulkhead lining. Refer to 757 AMM
25-50-03 as an accepted procedure.
c. Close the P36 panel assembly door. Refer to 757 AMM 25-50-03 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
39 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 40

d. Close the panel door adjacent to the P36 panel. Refer to 757 AMM 25-50-03 as an accepted
procedure.
e. Put the airplane back to a serviceable condition.
2. Group 5-8:
Do the steps that follow:
a. In the forward cargo compartment, install kept forward bulkhead lining. Refer to 757 AMM
25-50-03 as an accepted procedure.
b. Close the P36 panel assembly door. Refer to 757 AMM 25-50-03 as an accepted procedure.
c. Close the panel door adjacent to the P36 panel. Refer to 757 AMM 25-50-03 as an accepted
procedure.
d. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1: May 16, 2012
40 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 41 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
• E4 ELECTRONICS RACK
E4 ELECTRONICS RACK
NUT
WASHERS
SCREW
E4-1
ELECTRONICS
SHELF
SCREW
WASHER
1561144
FIGURE 1: REMOVAL OF THE E4-1 ELECTRONICS SHELF
(SHEET 1 OF 3)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  2O10-7-9L
Work - See page 1 for details.  41 of 127

### Page 42

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
3-NUTRemove / Keep1
6-WASHERRemove / Keep
3-SCREWRemove / Keep
1-SCREWRemove / Keep2
1-WASHERRemove / Keep
FIGURE 1: REMOVAL OF THE E4-1 ELECTRONICS SHELF
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
42 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 43

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1-NUTRemove / Keep3
1-WASHERRemove / Keep
1-BONDING JUMPERRemove / Keep
1-SCREWRemove / Keep
1284N1541-()SHELF ASSY-E4-1
ELEX EQUIP CENTER
Remove / Keep4
FIGURE 1: REMOVAL OF THE E4-1 ELECTRONICS SHELF
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
43 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 44 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
1561148
FIGURE 2: REMOVAL OF THE FLOOR PANEL AND COVERS
(SHEET 1 OF 2)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  LO1O-8Z-L9L
Work - See page 1 for details.

### Page 45

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
2287N1113-()COVERRemove / Keep1
6BACS12HN3-10BOLTRemove / Keep
6BACS12HN3-14BOLTRemove / Keep
12NAS1149D0363JWASHERRemove / Keep
1284N1033-()FLOOR PANELRemove / Keep2
11NAS514P1032-14PBOLTRemove / Keep
14NAS43HT3-24SPACERRemove / Keep
8BACW10U-C102PWASHERRemove / Keep
FIGURE 2: REMOVAL OF THE FLOOR PANEL AND COVERS
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
45 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 46 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
W1260
A1 +111146208-22+11111111||1 GD-1683-AC
А2 НН+6210-22+HІНІНН  20
АЗ  NOT USED
B1 71/1+6207-22+  H_||' GD-1683-AC
B2 7///// 6209-22 +  21
B3 NOT USED
x2 7////+6206-22 +  18
X1 7////+6205-22+  SM22  776215-22  17
D1349  X+ 1079-22
K10599 PWR RLY MUX  19
11076-22  D41475P
(POS 02)
P36 MISC ELEC EQUIP PANEL
- ADDED WIRE OR NEW ROUTING
+ DELETED WIRE OR FORMER ROUTING
EXISTING WIRE
REFERENCE:757 WDM 23-34-15
FIGURE 3: CHANGES TO WIRE BUNDLE W1260 AT THE P36 PANEL
(SHEET 1 OF 1)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-23-0107
Work - See page 1 for details.  46 of 127

### Page 47 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
P36 PANEL
PLATE "D"
1561159
FIGURE 4: REMOVE RELAY, RELAY SOCKET AND DECAL
(SHEET 1 OF 3)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  2O10-7-9L
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  LEL 1O LE

### Page 48 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
RELAY,
RELAY SOCKET  DECAL
PLATE 'D'
(TYPICAL, CONFIGURATION MAY VARY)
1562034
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 4: REMOVE RELAY, RELAY SOCKET AND DECAL
(SHEET 2 OF 3)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-23-0107
Work - See page 1 for details.  48 of 127

### Page 49

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to SWPM 20-
81-22 as an accept-
ed procedure.
1BACR13CG2ABRELAYRemove1
Refer to SWPM 20-
81-22 as an accept-
ed procedure.
1-RELAY SOCKETRemove
Refer to SOPM 20-
50-05 as an accept-
ed procedure.
1BAC27NEX2267VINYL DECALRemove2
FIGURE 4: REMOVE RELAY, RELAY SOCKET AND DECAL
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
49 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 50 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
P36 PANEL
PLATE "A"
1561525
FIGURE 5: INSTALL RELAY SOCKET AND DECAL
(SHEET 1 OF 2)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright @ Unpublished
Work - See page 1 for details.

### Page 51

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to SWPM 20-
81-22 as an accept-
ed procedure.
1BACS16W1ARELAY SOCKETInstall (New)1
Refer to SOPM 20-
50-05 as an accept-
ed procedure.
1BAC27NEX2267VINYL DECALInstall (New)2
FIGURE 5: INSTALL RELAY SOCKET AND DECAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
51 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 52 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
P36 PANEL
P36
DISCONNECT
PANEL
D41024J
POS 11
D41475J
PLATE A  POS 02
K10599
09Z1M
FIGURE 6: WIRE ROUTING FOR WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 1 OF 1)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  LO1O-EZ-L9L
Work - See page 1 for details.

### Page 53 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 5-8.
P36 LEFT MISCELLANEOUS
ELECTRONICS EQUIPMENT PANEL
D41497J
POS 12
P36 DISCONNECT PANEL
PLATE A
K10599
W1260
FIGURE 7: WIRE ROUTING FOR WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 1 OF 1)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  2O10-7-9L
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.

### Page 54 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-3.
W1260
C1  6689-22
- W4424
C2  6690-22  38
D41024P
СЗ  NOT USED  (POS 11)
A1  6208-22  33
A2  6210-22  20
АЗ  NOT USED
B1  6207-22  34
B2  6209-22  21  > W4471
ВЗ  NOT USED
X2  6206-22  18
Х1  6205-22  • SM22  - 6215-22-  17
D1349  19 —→
K10599 PWR RLY MUX  - 1079-22-
- 1076-22.  D41475P
(POS 02)
P36 MISC ELEC EQUIP PANEL
ADDED WIRE OR NEW ROUTING
— DELETED WIRE OR FORMER ROUTING  1561152
EXISTING WIRE
REFERENCE:757 WDM 23-34-15
FIGURE 8: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 1 OF 2)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-23-0107
Work - See page 1 for details.  54 of 127

### Page 55

The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
1280N3367-104WWIRE LIST1
Refer to SWPM 20-10-11 and
SWPM 20-10-19 as accepted pro-
cedures.
1280N3367-10401LOCKSTITCH - WHITE
Refer to SWPM 20-10-11 as an
accepted procedure.
1280N3367-10403CONN ID TAPE D13492
Refer to SWPM 20-30-12 as an
accepted procedure.
135115SPLICE, WIRE, CLOSED
END
3
Refer to SWPM 20-10-11 as an
accepted procedure.
1280N3367-10402ID TAPE SM224
Refer to SWPM 20-61-11 as an
accepted procedure.
7BACC47CP1SCONTACT, SOCKET5
Refer to SWPM 20-81-12 as an
accepted procedure.
8BACC47DJ1CONTACT, SOCKET6
WIRE LIST - CUT AND CODE AS REQUIRED -104W
MATERIAL
SPECIFICA-
TIONS
LENGTH (INCH-
ES)
TYPE CODEGAGE COLORWIRE #WBA #
BMS 13-48,
TYPE 10, CL1
120PA226205W1260
BMS 13-48,
TYPE 10, CL1
120PA226206W1260
BMS 13-48,
TYPE 10, CL1
120PA226207W1260
BMS 13-48,
TYPE 10, CL1
120PA226208W1260
BMS 13-48,
TYPE 10, CL1
120PA226209W1260
BMS 13-48,
TYPE 10, CL1
120PA226210W1260
BMS 13-48,
TYPE 10, CL1
120PA226689W1260
BMS 13-48,
TYPE 10, CL1
120PA226690W1260
FIGURE 8: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
55 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 56 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 4.
W1260
C1  6689-22
- W4424
C2  6690-22
5> J  D41024P
СЗ  NOT USED  (POS 11)
A1  6208-22  43
A2  - 6210-22  20
АЗ  NOT USED
B1  6207-22  45
B2  6209-22  21  > W4471
ВЗ  NOT USED
6206-22  18
Х1  6205-22  • SM22  - 6215-22-  17
K10599 PWR RLY MUX  D1349  - 1079-22-  19—→
- 1076-22 -  D41475P
(POS 02)
P36 MISC ELEC EQUIP PANEL
• ADDED WIRE OR NEW ROUTING
FAT DELETED WIRE OR FORMER ROUTING  1561153
EXISTING WIRE
REFERENCE:757 WDM 23-34-15, 757 WDM 23-31-18, 757 WDM 23-34-12
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
FIGURE 9: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 1 OF 2)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-23-0107
Work - See page 1 for details.  56 of 127

### Page 57

MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
1280N3367-104WWIRE LIST1
Refer to SWPM 20-10-11 and
SWPM 20-10-19 as accepted pro-
cedures.
1280N3367-10401LOCKSTITCH - WHITE
Refer to SWPM 20-10-11 as an
accepted procedure.
1280N3367-10403CONN ID TAPE D13492
Refer to SWPM 20-30-12 as an
accepted procedure.
135115SPLICE, WIRE, CLOSED
END
3
Refer to SWPM 20-10-11 as an
accepted procedure.
1280N3367-10402ID TAPE SM224
Refer to SWPM 20-61-11 as an
accepted procedure.
7BACC47CP1SCONTACT, SOCKET5
Refer to SWPM 20-81-12 as an
accepted procedure.
8BACC47DJ1CONTACT, SOCKET6
WIRE LIST - CUT AND CODE AS REQUIRED -104W
MATERIAL
SPECIFICA-
TIONS
LENGTH (INCH-
ES)
TYPE CODEGAGE COLORWIRE #WBA #
BMS 13-48,
TYPE 10, CL 1
120PA226205W1260
BMS 13-48,
TYPE 10, CL 1
120PA226206W1260
BMS 13-48,
TYPE 10, CL 1
120PA226207W1260
BMS 13-48,
TYPE 10, CL 1
120PA226208W1260
BMS 13-48,
TYPE 10, CL 1
120PA226209W1260
BMS 13-48,
TYPE 10, CL 1
120PA226210W1260
BMS 13-48,
TYPE 10, CL 1
120PA226689W1260
BMS 13-48,
TYPE 10, CL 1
120PA226690W1260
FIGURE 9: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
57 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 58 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 5-8.
W1260
A1  6208-221  42
14 6208-20+1111111111.
GD1672-AC
B1  • 6207-221  43
TH+ 6207-20+H11H11114  GD1672-AC
C1  6462-22 1  44
+ 6462-20 +
D1  6463-22 1  50
D1349
K10599 PWR RLY MUX
(PLATE A)  ++ 6463-20 +11
P36 MISC ELEC EQUIP PANEL
• ADDED WIRE OR NEW ROUTING
+ 74 DELETED WIRE OR FORMER ROUTING
EXISTING WIRE
REFERENCE: 757 WDM 23-34-15
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
FLAG
NOTE  NAME  IDENTIFICATION  QTY  MORE DATA
1  WIRE LIST  280N3367-105W
LOCKSTITCH - WHITE  280N3367-10501  Refer to SWPM 20-10-11 and
SWPM 20-10-19 as accepted pro-
cedures.
FIGURE 10: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 1 OF 2)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-23-0107
Work - See page 1 for details.  58 of 127

### Page 59

MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
Refer to SWPM 20-81-12 as an
accepted procedure.
4BACC47DJ1CONTACT, SOCKET2
Refer to SWPM 20-61-11 as an
accepted procedure.
4BACC47CP1SCONTACT, SOCKET3
WIRE LIST - CUT AND CODE AS REQUIRED - 105W
MATERIAL
SPECIFICA-
TIONS
LENGTH (INCH-
ES)
TYPE CODEGAGE COLORWIRE #WBA #
BMS 13-48,
TYPE 10, CL 1
120PA226207W1260
BMS 13-48,
TYPE 10, CL 1
120PA226208W1260
BMS 13-48,
TYPE 10, CL 1
120PA226462W1260
BMS 13-48,
TYPE 10, CL 1
120PA226463W1260
FIGURE 10: CHANGES TO WIRE BUNDLE W1260 IN THE P36 PANEL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: August 24, 2009
757-23-0107Revision 1 May 16, 2012
59 of 127
BOEING SERVICE BULLETIN 757-23-0107

### Page 60 (OCR)

BOEING SERVICE BULLETIN 757-23-0107
This Figure applies only to: Group 1-4.
E4-1 ELECTRONICS SHELF
W1165
GD1852-AC
D41367J
POS 23
D40015J
POS 20
E4-1  YC17
ELECTRONICS
SHELF  1562437
TB108
FIGURE 11: WIRE ROUTING FOR WIRE BUNDLE W1165 ON THE E4-1 ELECTRONICS SHELF
(SHEET 1 OF 1)
Original Issue: August 24, 2009
Revision 1 May 16, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-23-0107
Work - See page 1 for details.  60 of 127

The text continues at https://openairdocs.org/service-documents/boeing/sb-757-23-0107/file/1148b8a2c525.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
