# Boeing Special Attention Service Bulletin 757-25-0308: Revision 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0473; AD 2025-20-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 757-25-0308](https://openairdocs.org/service-documents/boeing/sb-757-25-0308.md)
- Title as filed: Boeing_SB-757-25-0308-Rev02
- Pages: 69
- PDF: https://openairdocs.org/files/sha256/d2/ed/d2ed5b9ee5406253af525e801ceba17bbe7b5eb6d642ad568587e8edea06a6c8
- Page: https://openairdocs.org/service-documents/boeing/sb-757-25-0308/file/d2ed5b9ee540

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0308
Original Issue: November 07, 2017
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
1 of 69
2.0

### Page 2

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
2 of 69
BOEING SERVICE BULLETIN 757-25-0308
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 29
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 31
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 32
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS
- REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1 -
CAPTAIN’S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL
MOVEMENT SYSTEM [Group 1, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . 51
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2 -
FIRST OFFICER'S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL
MOVEMENT [Group 1, Configuration 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
3 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 4

APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN’S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION
AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 2, 4]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4 -
FIRST OFFICER'S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1,
Configuration 3-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 5: WORK PACKAGE 5 -
CAPTAIN’S SEAT – REPEAT ACTIONS - CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
[Group 1, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 6: WORK PACKAGE 6 -
FIRST OFFICER’S SEAT – REPEAT ACTIONS - CHECK OF THE HORIZONTAL MOVEMENT
SYSTEM [Group 1, Configuration 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
APPENDIX G: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 7: WORK PACKAGE 7 -
CAPTAIN’S SEAT – REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND
CHECK OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 2, 4] . . . 65
APPENDIX H: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 8: WORK PACKAGE 8 -
FIRST OFFICER’S SEAT – REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION
AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 3-4] . 67
APPENDIX I: CAPTAIN'S AND FIRST OFFICER'S SEATS, PART NUMBER SERIES 3A258, HORIZONTAL
MOVEMENT SYSTEM - HORIZONTAL ACTUATOR LOCATION [Group 1, Configuration 2-4]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
4 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 757-25-0308Original Issue: November 07, 2017
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-26-03 is related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Effects of this Revision on airplanes on which the Original Issue or Revision 1 was previously done:
None.
REASON FOR REVISION
This revision is sent to add a newer issue of each concurrent supplier service bulletin and to add an option to
install a serviceable seat for Condition 4 of Work Packages 3 and 4.
These sections were changed:
1. In Summary, Background; changed information, added Service Related Problem (SRP) reference.
2. In Summary, Effectivity; added 'equipped'.
3. In Summary, Compliance; added AD information.
4. In Paragraph 1.A.1., Airplanes; changed information and listed specific line numbers and line number
ranges. Deleted Engineering Change Memo PRR 54530-316RS.
5. In Paragraph 1.B., Concurrent Requirements; changed to add a newer issue of each concurrent supplier
service bulletin.
6. In Paragraph 1.C., Reason; changed information, added SRP reference and Revision 2 information.
7. In Paragraph 1.D., Description; added Revision 2 information.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
5 of 69

### Page 6

8. In Paragraph 1.E., Compliance; changed the information related to Paragraph 3. Accomplishment
Instructions and deleted information related to logic diagram references. Added AD information and
changed the header of the compliance time columns. Added Option 1 and Option 2 for Condition 4 of
Work Packages 3 and 4.
9. In Paragraph 1.F., Approval; added 'Union' and Alternative Method Of Compliance (AMOC) information.
10. In Paragraph 1.G., Manpower; added footnote (c) for the tables for Work Packages 3 and 4. Changed
a task and added values for the tables for Work Package 5 and 6.
11. In Paragraph 1.J.1., Existing Data; added references, deleted a reference.
12. In Paragraph 2.A., Material - Price and Availability; added a reference to Paragraph 2.D., Parts Necessary
to Change Spares.
13. In Paragraph 2.C.2., Parts and Materials Supplied by the Operator; changed part numbers, added
applicability, changed column headers. Changed footnotes (a) and (b).
14. In Paragraph 2.C.3., Parts Modified and Reidentified; divided information into two tables and added
applicability.
15. In Paragraph 3.A., General Information; changed note 3, added information in note 4, added part
numbers in notes 15 and 16.
16. In Paragraph 3.B., Work Instructions:
a. Added Option 1 and Option 2 for Condition 4 of Work Packages 3 and 4.
b. Changed a conditional action in Work Packages 3, 4, 7 and 8.
c. Changed footnote (a) in the table of Parts 1, 2, 3, 4, 7 and 8.
d. Added seat part numbers in Parts 5 and 6.
17. Figure 1 and Figure 2; added a reference.
18. Appendix A and Appendix B; added flag note table, added flag note (a) to logic diagrams, and corrected
typographical errors.
19. Appendix C and Appendix D:
a. Added information to flag note (a).
b. Added flag note (b) to flag note table and logic diagrams.
c. Added Option 1 and Option 2 for Condition 4 of Work Packages 3 and 4 to logic diagrams.
d. Corrected typographical errors.
20. Appendix G and Appendix H; added information to flag note (a).
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
6 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 7

Pages with no vertical lines have no changes.
REVISION HISTORY
November 07, 2017Original Issue:
June 07, 2018Revision 1:
June 12, 2023Revision 2:
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
7 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 8

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
8 of 69
BOEING SERVICE BULLETIN 757-25-0308
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-25-0308Original Issue: November 07, 2017
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats will have
un-commanded seat movement because of horizontal actuator shaft failure. If this service bulletin is not done,
the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s) could break and cause an
un-commanded seat movement. Un-commanded seat movement could lead to reduced controllability of the
airplane.
An operator reported the Captain's seat could not be locked in position after the horizontal position of the seat
was adjusted in flight. The seat became unlocked from the track and moved freely forward and aft. Control was
given to the First Officer for approach and landing. An inspection found the horizontal actuator output shaft had
broken. When the horizontal actuator output shaft breaks, pilots cannot prevent seat movement in a forward
and aft direction and cannot lock the seat in position. A broken shaft is the result of high loads, that are more
than design limits, from a stalled motor, that can occur due to high mechanical resistance to motion during
powered operation of the seat. Any object that can potentially impede seat movement (Foreign Object Debris
(FOD)) in the seat tracks is another condition that can result in a stalled motor and cause the horizontal actuator
output shaft to break.
This service bulletin gives instructions for airplanes with powered Ipeco part numbers series 3A090 Captain's
seat or First Officer's seat installed. Corrective actions are necessary by an off-airplane inspection of the seat
by the applicable Ipeco service bulletin. Repeat on-airplane check, at intervals not to exceed 36 months, are
necessary for the Captain's and First Officer's seats by the applicable Ipeco service bulletin.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
9 of 69

### Page 10

This service bulletin gives instructions to find the part number and 'amendment' of the horizontal actuator of the
Horizontal Movement System (HMS) of the Captain's and First Officer's seats. If the horizontal actuator has
Artus part number AD8650503 at 'Amendment B' or earlier or Artus part number AD8650502, corrective actions
are necessary by an off-airplane inspection of the seat by the applicable Ipeco service bulletin, where signs of
damage to the HMS make the replacement of the horizontal actuator necessary. If the actuator continues to be
Artus part number AD8650503 at 'Amendment B' or earlier, or part number AD8650502, repeat on-airplane
inspections are necessary for the Captain's and First Officer's seats by the applicable Ipeco service bulletin.
Installation of a horizontal actuator, Artus part number AD8650503 at 'Amendment C' or later, will significantly
decrease the risk of a broken horizontal actuator output shaft.
Boeing Service Related Problems (SRP) 757-SRP-25-0306 and 757-SRP-25-0418 are related to this service
bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 25-12002 is related to this problem.
PRR 54530-316RS is related to this service bulletin
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
YesSpecial Tooling Required
ACTION
Do inspections and checks of the Captain's and First Officer's seats. Do corrective actions.
EFFECTIVITY
757-200 Airplane(s) equipped with Ipeco part number series 3A090 and 3A258 Captain's and First Officer's
powered seats. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
10 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 11

COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-26-03 is related to this service bulletin.
The effective date of AD 2018-26-03 is January 31, 2019.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
11 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 12 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
FIRST
OFFICER'S
SEAT
CAPTAIN'S
SEAT
DO INSPECTIONS AND CHECKS OF THE
CAPTAIN'S AND FIRST OFFICER'S SEATS.
DO CORRECTIVE ACTIONS.
FWD
CAPTAIN'S SEAT  2186544
(TYPICAL)
(FIRST OFFICER'S SEAT OPPOSITE)
Original Issue: November 07, 2017
Revision 2: June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  12 of 69

### Page 13

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0308
Original Issue: November 07, 2017
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This bulletin is applicable to 757-200 Airplane(s), line number(s) 553, 561, 572, 588, 591, 593,
603, 616-617, 620, 731, 739, 783, 787, 824, 829, 860, 863, 875, 881, 886, 889, 897, 900, 902,
905, 920, 924, 927, 934-944, 948-949, 953, 955, 959 in 1 Group(s). Where the effectivity is
presented with hyphens between line numbers, the airplane applicability means "through" and
"inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Refer to Service Bulletin Index D624N001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
The Variable Numbers and Group Information for the applicable airplanes is given below.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
13 of 69

### Page 14

DESCRIPTIONCONFIGURATIONGROUP
757-200 Airplanes equipped with powered Ipeco Captain's and First
Officer's seats
-1
Airplanes equipped with Ipeco powered Captain's seat, part number
series 3A090 and powered Ipeco First Officer's seat, part number
series 3A090
1
Airplanes equipped with Ipeco Captain's seat, part number series
3A258 and powered Ipeco First Officer's seat, part number series
3A090
2
Airplanes equipped with powered Ipeco Captain's seat, part number
series 3A090 and Ipeco First Officer's seat, part number series 3A258
3
Airplanes equipped with Ipeco Captain's seat, part number series
3A258 and Ipeco First Officer's seat, part number series 3A258
4
Airplane Models:
757-200
GroupVariable Number
1NC151
1NC161
1ND241 - ND248
GroupVariable Number
1NE301 - NE302
1NP901 - NP904
1NT441 - NT442
GroupVariable Number
1NT720 - NT730
1NT901 - NT916
--
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
3A090-0077-01-1
3A090-0078-01-1
3A258-0007-01-1
3A258-0008-01-1
B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
14 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 15

DescriptionService BulletinCompany
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 210-25-05, Issue 4 or Issue 5 (a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 210-25-06, Issue 4 or Issue 5 (a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 258-25-15, Issue 4 or Issue 5 or
Issue 6 (c)(d)
Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 258-25-16, Issue 4 or Issue 5 (c)(d)Ipeco Holdings Ltd
(a) Applicable to Captain's seat part number 3A090-0077-01-1.
(b) Applicable to First Officer's seat part number 3A090-0078-01-1.
(c) Applicable to Captain's seat part number 3A258-0007-01-1.
(d) Applicable to First Officer's seat part number 3A258-0008-01-1.
C. Reason
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats
will have un-commanded seat movement because of horizontal actuator shaft failure. If this service
bulletin is not done, the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s)
could break and cause an un-commanded seat movement. Un-commanded seat movement could lead
to reduced controllability of the airplane.
An operator reported the Captain's seat could not be locked in position after the horizontal position of
the seat was adjusted in flight. The seat became unlocked from the track and moved freely forward
and aft. Control was given to the First Officer for approach and landing. An inspection found the horizontal
actuator output shaft had broken. When the horizontal actuator output shaft breaks, pilots cannot
prevent seat movement in a forward and aft direction and cannot lock the seat in position. A broken
shaft is the result of high loads, that are more than design limits, from a stalled motor, that can occur
due to high mechanical resistance to motion during powered operation of the seat. Any object that can
potentially impede seat movement (Foreign Object Debris (FOD)) in the seat tracks is another condition
that can result in a stalled motor and cause the horizontal actuator output shaft to break.
This service bulletin gives instructions for airplanes with powered Ipeco part numbers series 3A090
Captain's seat or First Officer's seat installed. Corrective actions are necessary by an off-airplane
inspection of the seat by the applicable Ipeco service bulletin. Repeat on-airplane check, at intervals
not to exceed 36 months, are necessary for the Captain's and First Officer's seats by the applicable
Ipeco service bulletin.
This service bulletin gives instructions to find the part number and 'amendment' of the horizontal actuator
of the Horizontal Movement System (HMS) of the Captain's and First Officer's seats. If the horizontal
actuator has Artus part number AD8650503 at 'Amendment B' or earlier or Artus part number
AD8650502, corrective actions are necessary by an off-airplane inspection of the seat by the applicable
Ipeco service bulletin, where signs of damage to the HMS make the replacement of the horizontal
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
15 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 16

actuator necessary. If the actuator continues to be Artus part number AD8650503 at 'Amendment B'
or earlier, or part number AD8650502, repeat on-airplane inspections are necessary for the Captain's
and First Officer's seats by the applicable Ipeco service bulletin. Installation of a horizontal actuator,
Artus part number AD8650503 at 'Amendment C' or later, will significantly decrease the risk of a broken
horizontal actuator output shaft.
Boeing Service Related Problems (SRP) 757-SRP-25-0306 and 757-SRP-25-0418 are related to this
service bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 25-12002 is related to this problem.
Revision 1 was sent to update the Concurrent Requirements to list the latest Ipeco service bulletin
issue numbers. Also, some conditions and the serviceable seat definition were changed to add clarity.
Revision 2 is sent to add a newer issue of each concurrent supplier service bulletin and to add an
option to install a serviceable seat for Condition 4 of Work Packages 3 and 4.
D. Description
Do inspections and checks of the Captain and First Officer's seats. Do corrective actions.
Effects of Revision 2 on airplanes on which the Original Issue or Revision 1 was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212757-200
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-26-03 is related to this service
bulletin. The effective date of AD 2018-26-03 is January 31, 2019.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 through 8, in
accordance with Paragraph 3. Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
16 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 17

Group 1, Configuration 1, 3:
Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 36 months after
the Original Issue date
of this service bulletin.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
DETAILED INSPECTION.
All Airplanes.
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS PASSED
(NO FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 5.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 5.
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS NOT
PASSED (ANY FINDINGS) -Within 120 days afterPART 1 was done.OPTION 1 (ACTION 2):Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL. (a)
Refer to Paragraph
1.E., Compliance
Table 5.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 5.
-Before further flight.OPTION 2 (ACTION 1):
Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL. (a)
Refer to Paragraph
1.E., Compliance
Table 5.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 5.
(a) It is permitted to install a spare seat that has passed PART 1 or done PART 3.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
17 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 18

Group 1, Configuration 1-2:
Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 36 months after
the Original Issue date
of this service bulletin.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM DETAILED INSPEC-
TION.
All Airplanes.
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS PASSED
(NO FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 6.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 6.
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS NOT
PASSED (ANY FINDINGS) -Within 120 days afterPART 2 was done.OPTION 1 (ACTION 2):Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL. (a)
Refer to Paragraph
1.E., Compliance
Table 6.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 6.
-Before further flight.OPTION 2 (ACTION 1):
Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL. (a)
Refer to Paragraph
1.E., Compliance
Table 6.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 6.
(a) It is permitted to install a spare seat that has passed PART 2 or done PART 4.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
18 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 19

Group 1, Configuration 2, 4:
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 36 months after
the Original Issue date
of this service bulletin.
Do PART 5: CAPTAIN'S
SEAT, PART NUMBER
SERIES 3A258 - HORI-
ZONTAL ACTUATOR
IDENTIFICATION.
All Airplanes.
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZON-
TAL ACTUATOR IS PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER --CONDITION 3 (ACTION
2): No further action re-
quired for this seat. (a)
-Within 36 months after
the Original Issue date
of this service bulletin.
OPTION 1: Do PART 1:
CAPTAIN'S SEAT - HOR-
IZONTAL MOVEMENT
SYSTEM DETAILED IN-
SPECTION.
CONDITION 4: THE HORIZON-
TAL ACTUATOR IS NOT PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER,
OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND
AMENDMENT CANNOT BE
FOUND
-OPTION 2: Install a ser-
viceable seat. (a)
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS PASSED
(NO FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 7.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 7.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
19 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 20

Group 1, Configuration 2, 4:
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS NOT
PASSED (ANY FINDINGS) -Within 120 days afterPART 1 was done.OPTION 1 (ACTION 2):Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL. (b)
Refer to Paragraph
1.E., Compliance
Table 7.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 7.
-Before further flight.OPTION 2 (ACTION 1):
Do PART 3: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
OFF AIRPLANE OVER-
HAUL. (b)
Refer to Paragraph
1.E., Compliance
Table 7.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 7.
-Before further flight.OPTION 3: Install a ser-
viceable seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance
with this service bulletin.
(b) It is permitted to install a spare seat that has passed PART 1 or done PART 3.
Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 36 months after
the Original Issue date
of this service bulletin.
Do PART 6: FIRST OFFI-
CER'S SEAT, PART
NUMBER SERIES 3A258
- HORIZONTAL ACTUA-
TOR IDENTIFICATION.
All Airplanes.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
20 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 21

Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZON-
TAL ACTUATOR IS PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER CONDITION 3 (ACTION
2): No further action re-
quired for this seat. (a)
-Within 36 months after
the Original Issue date
of this service bulletin.
OPTION 1: Do PART 2:
FIRST OFFICER'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM DE-
TAILED INSPECTION.
CONDITION 4: THE HORIZON-
TAL ACTUATOR IS NOT PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER,
OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND
AMENDMENT CANNOT BE
FOUND
-OPTION 2: Install a ser-
viceable seat. (a)
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS PASSED
(NO FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 8.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 8.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
21 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 22

Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO
SERVICE BULLETIN, PART A
- INSPECTION' IS NOT
PASSED (ANY FINDINGS) -Within 120 days afterPART 2 was done.OPTION 1 (ACTION 2):Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL. (b)
Refer to Paragraph
1.E., Compliance
Table 8.
-OPTION 1 (ACTION 3):
Do the repeat actions in
accordance with Work
Package 8.
-Before further flight.OPTION 2 (ACTION 1):
Do PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL. (b)
Refer to Paragraph
1.E., Compliance
Table 8.
-OPTION 2 (ACTION 2):
Do the repeat actions in
accordance with Work
Package 8.
-Before further flight.OPTION 3: Install a ser-
viceable seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for the First Officer's seat in
accordance with this service bulletin.
(b) It is permitted to install a spare seat that has passed PART 2 or done PART 4.
Group 1, Configuration 1, 3:
Table 5: WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
36 months.Within 36 months after
WORK PACKAGE 1
was accomplished.
Do PART 7: CAPTAIN'S
SEAT HORIZONTAL
MOVEMENT SYSTEM
ON AIRPLANE CHECKS
AND CORRECTIVE AC-
TION.
All Airplanes.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
22 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 23

Group 1, Configuration 1-2:
Table 6: WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORI-
ZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
36 months.Within 36 months after
WORK PACKAGE 2
was accomplished.
Do PART 8: FIRST OFFI-
CER'S SEAT HORIZON-
TAL MOVEMENT SYS-
TEM ON AIRPLANE
CHECKS AND CORREC-
TIVE ACTION.
All Airplanes.
Group 1, Configuration 2, 4:
Table 7: WORK PACKAGE 7- CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
36 months.(a)Within 36 months after
WORK PACKAGE 3
was accomplished.
Do PART 5: CAPTAIN'S
SEAT, PART NUMBER
SERIES 3A258 - HORI-
ZONTAL ACTUATOR
IDENTIFICATION
All Airplanes.
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZON-
TAL ACTUATOR IS PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER --CONDITION 3 (ACTION
2): No further action re-
quired for this seat. (a)
-Before further flight.OPTION 1: Do PART 7:
CAPTAIN'S SEAT HORI-
ZONTAL MOVEMENT
SYSTEM ON AIRPLANE
CHECKS AND CORREC-
TIVE ACTION.
CONDITION 4: THE HORIZON-
TAL ACTUATOR IS NOT PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER,
OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND
AMENDMENT CANNOT BE
FOUND OPTION 2: Install a ser-viceable seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance
with this service bulletin.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
23 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 24

Group 1, Configuration 3-4:
Table 8: WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
36 months.(a)Within 36 months after
WORK PACKAGE 4
was accomplished.
Do PART 6: FIRST OFFI-
CER'S SEAT, PART
NUMBER SERIES 3A258
- HORIZONTAL ACTUA-
TOR IDENTIFICATION.
All Airplanes.
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZON-
TAL ACTUATOR IS PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER --CONDITION 3 (ACTION
2): No further action re-
quired for this seat. (a)
-Before further flight.OPTION 1: Do PART 8:
FIRST OFFICER'S SEAT
HORIZONTAL MOVE-
MENT SYSTEM ON AIR-
PLANE CHECKS AND
CORRECTIVE ACTION.
CONDITION 4: THE HORIZON-
TAL ACTUATOR IS NOT PART
NUMBER AD8650503 AT
'AMENDMENT C' OR LATER,
OR THE HORIZONTAL ACTU-
ATOR PART NUMBER AND
AMENDMENT CANNOT BE
FOUND OPTION 2: Install a ser-viceable seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for the First Officer's seat in
accordance with this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the inspections,
adjustments and installation defined in SB 757-25-0308, Revision 2 as an alternative method of
compliance to accomplishing the inspections, adjustments and installation required by paragraph (g)
of AD 2018-26-03. All provisions of AD 2018-26-03that are not specifically referenced in the above
statement remain fully applicable and must be complied with accordingly.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
24 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 25

G. Manpower
The tables below show an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Group 1, Configuration 1, 3:
WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.400.802Seat Removal
0.250.251Seat Power Adjustment
System Deactivation (a)
0.300.301FIGURE 1
0.400.802Seat Installation
0.250.251Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.400.802Seat Removal
0.250.251Seat Power Adjustment
System Deactivation (a)
0.300.301FIGURE 2
0.400.802Seat Installation
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
25 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 26

Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 2, 4:
WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 1
0.400.802Seat Removal (c)
0.250.251Seat Power Adjustment
System Deactivation (a)
0.400.802Seat Installation (c)
0.250.251Operational Test (c)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
(c) Applicable to Condition 4.
Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
26 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 27

Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 2
0.400.802Seat Removal (c)
0.250.251Seat Power Adjustment
System Deactivation (a)
0.400.802Seat Installation (c)
0.250.251Operational Test (c)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
(c) Applicable to Condition 4.
Group 1, Configuration 1, 3:
WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.300.301FIGURE 1
0.250.251Close Access
0.800.80TOTAL FOR EACH AIRPLANE
Group 1, Configuration 1-2:
WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZON-
TAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.300.301FIGURE 2
0.250.251Close Access
0.800.80TOTAL FOR EACH AIRPLANE
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
27 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 28

Group 1, Configuration 2, 4:
WORK PACKAGE 7 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 1
0.400.802Seat Removal (a)
0.400.802Seat Installation (a)
0.250.251Operational Test (a)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 2.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 3-4:
WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 2
0.400.802Seat Removal (a)
0.400.802Seat Installation (a)
0.250.251Operational Test (a)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 2.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
The time to do the work in accordance with the applicable Ipeco service bulletin(s) is not included in
the manpower estimate.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
28 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 29

H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 757-SRP-25-0306, 757-SRP-25-0418
b. Ipeco Component Maintenance Manual (CMM) 25-11-26
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2018-26-03
d. Service Bulletin Index D624N001
e. 757 Aircraft Maintenance Manual (AMM) 25-11-00, 25-11-01
f. 757 Fleet Team Digest (FTD) 25-12002
g. 757 Master Minimum Equipment List (MMEL) 25-11-01-01
h. Ipeco Service Bulletin 210-25-05, 210-25-06, 258-25-15, 258-25-16
NOTE: The supplier was told to send copies of each service bulletin to each operator.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-11757 Aircraft Maintenance Manual
11-31, 25-11757 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
29 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 30

L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
30 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 31

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane, and Paragraph 2.D., Parts Necessary to Change Spares. Refer to Ipeco SB 210-25-06 or
Ipeco SB 258-25-16.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
Group 1, Configuration 2-4:
NotesExisting Ipeco Part Num-
ber
NameQTYIpeco Part Num-
ber
(a)(b)3A258-0007-01-1Seat Assy - Captain13A258-0007-01-2
(a)(b)3A258-0008-01-1Seat Assy - F/O13A258-0008-01-2
(a) A new seat assembly is an alternative to the accomplishment of the Ipeco service bulletin.
(b) This part number of new seat assembly has horizontal actuator, Artus part number AD8650503 (Ipeco
part number 2A258-0487), at 'Amendment C' or later, installed.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
Group 1, Configuration 1-3:
NotesNew Ipeco Part
Number
NameQTYExisting Ipeco
Part Number
(a)(b)-Seat Assy13A090-0077-01-1
(a)(b)-Seat Assy13A090-0078-01-1
(a) Make the change in accordance with Ipeco SB 210-25-06.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
31 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 32

Group 1, Configuration 1-3:
NotesNew Ipeco Part
Number
NameQTYExisting Ipeco
Part Number
(b) The Ipeco part number (and Boeing part number) does not change. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 1, Configuration 2-4:
NotesNew Ipeco Part
Number
NameQTYExisting Ipeco
Part Number
(a)(b)(c)3A258-0007-01-1ZSeat Assy - Captain13A258-0007-01-1
(a)(b)(c)3A258-0008-01-1ZSeat Assy - F/O13A258-0008-01-1
(a) Make the change in accordance with Ipeco SB 258-25-16.
(b) The Captain's and First Officer's seats are only changed into the new part numbers if the
horizontal actuator AD8650503 at 'Amendment C' or later, or part number 2A258-0487 is
installed.
(c) This is the part number after the change in accordance with Ipeco SB 258-25-16 is done.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
E. Special Tooling - Price and Availability
Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
F. Special Tooling Necessary to do this Service Bulletin
Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
32 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 33

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Each work package can be
completed independently during separate maintenance visits. Task Hours and Elapsed
Hours for each package are given in Paragraph 1.G., Manpower.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 757-200 Structural Repair
Manual, Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 757
Aircraft Maintenance Manual (AMM).
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Refer to APPENDIX A, APPENDIX B, APPENDIX C, APPENDIX D, APPENDIX E,
APPENDIX F, APPENDIX G and APPENDIX H for logic diagram(s). Logic diagrams
are provided as an aid only. Information contained in Paragraph 1.E., Compliance
is the primary source for compliance times. Information in Paragraph 3.B., Work
Instructions is the primary source for tasks required for compliance.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
33 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 34

8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
11. The CONDITIONS, ACTIONS and OPTIONS shown apply to the Captain's and First
Officer's seats independently.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as "RC", including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt" then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
14. For part number series 3A258 seats, horizontal actuator part number AD8650503
identified in the Paragraph 3.B., Work Instructions and the Figures is the Artus identity.
This actuator also has an Ipeco identity, which is part number 2A258-0487.
15. A serviceable Captain's seat in this service bulletin is defined as one with part number
3A258-0007-01-2 or 3A258-0007-01-1Z, or as one with part number 3A258-0007-01-1
that has a horizontal actuator with Artus part number AD8650503 at 'Amendment C'
or later. Installation of a serviceable Captain's seat is a terminating action to the
repeat inspections in this service bulletin.
16. A serviceable First Officer's seat in this service bulletin is defined as one with part
number 3A258-0008-01-2 or 3A258-0008-01-1Z, or as one with part number
3A258-0008-01-1 that has a horizontal actuator with Artus part number AD8650503
at 'Amendment C' or later. Installation of a serviceable First Officer's seat is a
terminating action to the repeat inspections in this service bulletin.
17. Foreign Object Debris (FOD) in this service bulletin can include coins, tools, nuts,
bolts, or any object that can potentially impede seat movement.
18. Findings from the 'Ipeco service bulletin Part A - Inspection', can include damaged,
defective, missing, inoperable, or maladjusted limit switches, horizontal actuator, or
horizontal pinion.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
34 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 35

B. WORK INSTRUCTIONS
Group 1, Configuration 1, 3:
WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
a. CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 5.
Refer to Paragraph 1.E., Compliance.
b. CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
(1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat that has done PART 1. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) Deactivate the power adjustment system of the seat in accordance with 757 Master
Minimum Equipment List (MMEL) 25-11-01-01.
(2) OPTION 1 (ACTION 2): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT
SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 5. Refer
to Paragraph 1.E., Compliance.
(4) OPTION 2 (ACTION 1): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT
SYSTEM OFF AIRPLANE OVERHAUL
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
35 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 36

(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package 5. Refer
to Paragraph 1.E., Compliance.
c. RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM 25-11-01 as
an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
a. CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 6.
Refer to Paragraph 1.E., Compliance.
b. CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
(1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat that has done PART 2. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) Deactivate the power adjustment system of the seat in accordance with 757 Master
Minimum Equipment List (MMEL) 25-11-01-01.
(2) OPTION 1 (ACTION 2): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
36 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 37

(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 6. Refer
to Paragraph 1.E., Compliance.
(4) OPTION 2 (ACTION 1): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package 6. Refer
to Paragraph 1.E., Compliance.
c. RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM 25-11-01 as
an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 2, 4:
WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 3 (ACTION 2): No further action required for this seat.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM
DETAILED INSPECTION
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
37 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 38

(a) CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 1.
2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work
Package 7. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install a seat that has done PART 1. Refer to 757 AMM 25-11-01 as an
accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
757 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or
done PART 3.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
7. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or
done PART 3.
5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
7. Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
38 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 39

6) OPTION 3: Install a serviceable seat:
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph
3.A., General Information, is a terminating action to the repeat
inspections for the Captain's seat in accordance with this service
bulletin.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
(2) OPTION 2: Install a serviceable seat:
(a) Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(c) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the Captain's seat in accordance with this service bulletin.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 3 (ACTION 2): No further action required for this seat.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
39 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 40

(1) OPTION 1: Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM
DETAILED INSPECTION
(a) CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 2.
2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work
Package 8. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install a seat that has done PART 2. Refer to 757 AMM 25-11-01 as an
accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
757 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or
done PART 4.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
8. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or
done PART 4.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
40 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 41

5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
8. Refer to Paragraph 1.E., Compliance.
6) OPTION 3: Install a serviceable seat:
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph
3.A., General Information, is a terminating action to the repeat
inspections for the First Officer's seat in accordance with this service
bulletin.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
(2) OPTION 2: Install a serviceable seat:
(a) Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(c) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the First Officer's seat in accordance with this service bulletin.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1, 3:
WORK PACKAGE 5: CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
a. Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b. Continue to do the repeat actions in accordance with Work Package 5. Refer to Paragraph
1.E., Compliance.
3. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
41 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 42

Group 1, Configuration 1-2:
WORK PACKAGE 6: FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
a. Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b. Continue to do the repeat actions in accordance with Work Package 6. Refer to Paragraph
1.E., Compliance.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 2, 4:
WORK PACKAGE 7: CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 3 (ACTION 2): No further action required for this seat.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON
AIRPLANE CHECKS AND CORRECTIVE ACTION
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Continue to do the repeat actions in accordance with Work Package 7. Refer to
Paragraph 1.E., Compliance.
(2) OPTION 2: Install a serviceable seat:
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's
seat in accordance with this service bulletin.
(a) Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
42 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 43

(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(c) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 3-4:
WORK PACKAGE 8: FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 3 (ACTION 2): No further action required for this seat.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM
ON AIRPLANE CHECKS AND CORRECTIVE ACTION
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Continue to do the repeat actions in accordance with Work Package 8. Refer to
Paragraph 1.E., Compliance.
(2) OPTION 2: Install a serviceable seat:
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for the
First Officer's seat in accordance with this service bulletin.
(a) Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(c) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
43 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 44

3. Put the airplane back to a serviceable condition.
PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4033A090-0077-01-1
Ipeco SB 258-25-16(a)S232T311-33A258-0007-01-1
(a) In accordance with the applicable Ipeco service bulletin Issue listed in Paragraph 1.B., Concurrent Require-
ments.
PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4043A090-0078-01-1
Ipeco SB 258-25-16(a)S232T311-43A258-0008-01-1
(a) In accordance with the applicable Ipeco service bulletin Issue listed in Paragraph 1.B., Concurrent Require-
ments.
PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
1. Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4033A090-0077-01-1
Ipeco SB 258-25-16(a)S232T311-33A258-0007-01-1
(a) In accordance with the applicable Ipeco service bulletin Issue listed in Paragraph 1.B., Concurrent Require-
ments.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
44 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 45

PART 4: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE
OVERHAUL
1. Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4043A090-0078-01-1
Ipeco SB 258-25-16(a)S232T311-43A258-0008-01-1
(a) In accordance with the applicable Ipeco service bulletin Issue listed in Paragraph 1.B., Concurrent Require-
ments.
Group 1, Configuration 2, 4:
PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
1. Find the Artus part number and 'Amendment' of the horizontal actuator that is installed on the seat.
a. Captain's seat part number 3A258-0007-01-2 and 3A258-0007-01-1Z have a horizontal
actuator with Artus part number AD8650503 at 'Amendment C' or later. For Captain's seats
with part number 3A258-0007-01-1, maintenance records can be used if the part number and
Amendment of the horizontal actuator can be identified. If maintenance records are not
available or the part number and amendment cannot be identified from maintenance records,
inspect to find the part number and Amendment of the horizontal actuator installed on the
seat. Refer to APPENDIX I.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat
in accordance with this service bulletin.
Group 1, Configuration 3-4:
PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
1. Find the part number and 'Amendment' of the horizontal actuator that is installed on the seat.
a. First Officer's seat part number 3A258-0008-01-2 and 3A258-0008-01-1Z have a horizontal
actuator with Artus part number AD8650503 at 'Amendment C' or later. For First Officer's
seats with part number 3A258-0008-01-1, maintenance records can be used if the part number
and Amendment of the horizontal actuator can be identified. If maintenance records are not
available or the part number and amendment cannot be identified from maintenance records,
inspect to find the part number and Amendment of the horizontal actuator installed on the
seat. Refer to APPENDIX I.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the First Officer's
seat in accordance with this service bulletin.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
45 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 46

PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS AND
CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-05(a)S232T303-4033A090-0077-01-1
Ipeco SB 258-25-15(a)S232T311-33A258-0007-01-1
(a) In accordance with the applicable Ipeco service bulletin Issue listed in Paragraph 1.B., Concurrent Require-
ments.
PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS
AND CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-05(a)S232T303-4043A090-0078-01-1
Ipeco SB 258-25-15(a)S232T311-43A258-0008-01-1
(a) In accordance with the applicable Ipeco service bulletin Issue listed in Paragraph 1.B., Concurrent Require-
ments.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2: June 12, 2023
46 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 47 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
FWD
CAPTAIN'S SEAT  2547885
(TYPICAL)
(LEFT SIDE VIEW)
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 1 OF 2)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  47 of 69

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD. Refer to 757
AMM 25-11-00 as
an accepted proce-
dure.
--FODRemove1
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2 June 12, 2023
48 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 49 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
FWD
FIRST OFFICER'S SEAT  (TYPICAL)  2547886
(LEFT SIDE VIEW)
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 1 OF 2)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  49 of 69

### Page 50

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD. Refer to 757
AMM 25-11-00 as
an accepted proce-
dure.
--FODRemove1
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2 June 12, 2023
50 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 51

This Appendix applies only to: Group 1, Configuration 1, 3.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
PART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIR-
PLANE OVERHAUL
PART 3
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(a)
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN’S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2 June 12, 2023
51 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 52 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 5  2561213
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  52 of 69

### Page 53 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
BEFORLIGHRTHER  FLIGHT
OPTION 1 (ACTION 1):  OPTION 2 (ACTION 1):
INSTALL SEAT  DO PART 3
WITHOUT POWER
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 1  DO THE REPEAT ACTIONS
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 5
OPTION 1 (ACTION 2):
DO PART 3
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 5
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 3 OF 3)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  53 of 69

### Page 54

This Appendix applies only to: Group 1, Configuration 1-2.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DE-
TAILED INSPECTION
PART 2
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF
AIRPLANE OVERHAUL
PART 4
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(a)
APPENDIX B:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2
- FIRST OFFICER'S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2 June 12, 2023
54 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 55 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 2
CONDITION 1  CONDITION 2
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 6  2561215
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2
- FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  55 of 69

### Page 56 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  OPTION 2 (ACTION 1):
INSTALL SEAT  DO PART 4
WITHOUT POWER
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 2  WAS DONE  DO THE REPEAT ACTIONS  IN ACCORDANCE WITH
WORK PACKAGE 6
OPTION 1 (ACTION 2):
DO PART 4
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 6  1216
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2
- FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 3 OF 3)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  757-25-0308
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.  56 of 69

### Page 57

This Appendix applies only to: Group 1, Configuration 2, 4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
PART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIR-
PLANE OVERHAUL
PART 3
CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
PART 5
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 3
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503
AT 'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR
PART NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
Terminating Action: Installation of a serviceable Captain's seat as defined
in Paragraph 3.A.,General Information, is a terminating action to the repeat
inspections for the Captain's seat in accordance with this service bulletin.
(a)
It is permitted to install a spare seat that has passed PART 1 or done
PART 3.
(b)
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN’S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2 June 12, 2023
57 of 69
BOEING SERVICE BULLETIN 757-25-0308

### Page 58 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 5
CONDITION 3  CONDITION 4
BEFORE FURTHER  WITHIN 36 MONTHS AFTER THE
FLIGHT  ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
CONDITION 3 (ACTION 1):
MAKE SURE THE SEAT TRACK
IS CLEAR OF FOD
OPTION 1:  OPTION 2:
DO PART 1  INSTALL A
SERVICEABLE SEAT
CONDITION 3 (ACTION 2):
NO FURTHER ACTION
REQUIRED FOR THIS SEAT
CONDITION 1  CONDITION 2
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACK
IS CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 7
2561217
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  58 of 69

### Page 59 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  INSTALL SEAT  OPTION 2 (ACTION 1):  INSTALL A SERVICEABLE  OPTION 3:
WITHOUT POWER  DO PART 3  (a)  SEAT
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 1  DO THE REPEAT ACTIONS
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 7
OPTION 1 (ACTION 2):
DO PART 3
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 7
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 3 OF 3)
Original Issue: November 07, 2017
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0308
Copyright © Unpublished Work - See page 1 for details.  59 of 69

### Page 60

This Appendix applies only to: Group 1, Configuration 3-4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DE-
TAILED INSPECTION
PART 2
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF
AIRPLANE OVERHAUL
PART 4
FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZON-
TAL ACTUATOR IDENTIFICATION
PART 6
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 3
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503
AT 'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR
PART NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
Terminating Action: Installation of a serviceable First Officer's seat as
defined in Paragraph 3.A.,General Information, is a terminating action to
the repeat inspections for the First Officer's seat in accordance with this
service bulletin.
(a)
It is permitted to install a spare seat that has passed PART 2 or done
PART 4.
(b)
APPENDIX D:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4
- FIRST OFFICER'S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND
OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 2 June 12, 2023
60 of 69
BOEING SERVICE BULLETIN 757-25-0308

The text continues at https://openairdocs.org/service-documents/boeing/sb-757-25-0308/file/d2ed5b9ee540.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
