# Boeing Special Attention Service Bulletin 757-25-0308: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0711; AD 2018-26-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 757-25-0308](https://openairdocs.org/service-documents/boeing/sb-757-25-0308.md)
- Title as filed: SB-757-25-0308-01
- Pages: 68
- PDF: https://openairdocs.org/files/sha256/dd/6b/dd6b5c0189f2c6bcb78df214503fc7c3c50dbfbc813b549d5816f467fa4812dc
- Page: https://openairdocs.org/service-documents/boeing/sb-757-25-0308/file/dd6b5c0189f2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0308
Original Issue: November 07, 2017
Revision 1: June 07, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
1 of 68
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
2 of 68
BOEING SERVICE BULLETIN 757-25-0308
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 28
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 31
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 32
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS
- REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
-CAPTAIN’S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL
MOVEMENT SYSTEM [Group 1, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . 50
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2-
FIRST OFFICER'S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL
MOVEMENT [Group 1, Configuration 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
3 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 4

APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN’S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION
AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 2, 4]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4-
FIRST OFFICER'S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1,
Configuration 3-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 5: WORK PACKAGE 5 -
CAPTAIN’S SEAT – REPEAT ACTIONS - CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
[Group 1, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 6: WORK PACKAGE 6-
FIRST OFFICER’S SEAT – REPEAT ACTIONS - CHECK OF THE HORIZONTAL MOVEMENT
SYSTEM [Group 1, Configuration 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
APPENDIX G: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 7: WORK PACKAGE 7 -
CAPTAIN’S SEAT – REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND
CHECK OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 2, 4] . . . 64
APPENDIX H: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 8: WORK PACKAGE 8 -
FIRST OFFICER’S SEAT – REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION
AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM [Group 1, Configuration 3-4] . 66
APPENDIX I: CAPTAIN'S AND FIRST OFFICER'S SEATS, PART NUMBER SERIES 3A258, HORIZONTAL
MOVEMENT SYSTEM - HORIZONTAL ACTUATOR LOCATION [Group 1, Configuration 2-4]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
4 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 757-25-0308Original Issue: November 07, 2017
Revision 1: June 07, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to update the Concurrent Requirements to list the latest Ipeco service bulletin issue numbers.
Also, some conditions and the serviceable seat definition were changed to add clarity. And, added a note
clarifying spare seat installation.
These sections were changed:
1. Summary, Background: Added the manufacturer name 'Artus' for part number 'AD865050( )'. Changed
information in planning table. Removed compliance time information.
2. Paragraph 1.B., Concurrent Requirements: Changed the issue number of each Ipeco service bulletin.
3. Paragraph 1.C., Reason: Added the manufacturer name 'Artus' for part number 'AD865050( )'. Added
Revision 1 information. Removed compliance time information.
4. Paragraph 1.D., Description: Added compliance information.
5. Paragraph 1.E., Compliance: Tables 3, 4, 7 and 8, changed footnote (a), and changed CONDITION 4
for clarity. Tables 5, 6, 7, and 8, changed reference from a PART to a WORK PACKAGE. Table 1, 2,
3, and 4, added footnote for spare seat installation
6. Paragraph 3.A., General Information: Changed serviceable seat definitions.
7. Paragraph 3.B., Work Instructions: Changed CONDITION 4. Parts 5 and 6, added more information
to the instructions and added a note for the serviceable seat. WORK PACKAGE 1, 2, 3, and 4, added
note for spare seat installation.
8. Appendix C and Appendix D: Changed CONDITION 4. Added footnote.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
5 of 68

### Page 6

9. Appendix E and Appendix F: Changed reference from a PART to a WORK PACKAGE.
10. Appendix G, and Appendix H: Changed CONDITION 4. Moved footnote and changed reference from
a PART to a WORK PACKAGE.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
November 07, 2017Original Issue:
June 07, 2018Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
6 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 7

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-25-0308Original Issue: November 07, 2017
Revision 1: June 07, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats will have
un-commanded seat movement because of horizontal actuator shaft failure. If this service bulletin is not done,
the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s) could break and cause an
un-commanded seat movement. Un-commanded seat movement could lead to reduced controllability of the
airplane.
An operator reported the Captain's seat could not be locked in position after the horizontal position of the seat
was adjusted in flight. The seat became unlocked from the track and moved freely forward and aft. Control was
given to the First Officer for approach and landing. An inspection found the horizontal actuator output shaft had
broken. When the horizontal actuator output shaft breaks, pilots cannot prevent seat movement in a forward
and aft direction and cannot lock the seat in position. A broken shaft is the result of high loads, that are more
than design limits, from a stalled motor, that can occur due to high mechanical resistance to motion during
powered operation of the seat. Any object that can potentially impede seat movement (Foreign Object Debris
(FOD)) in the seat tracks is another condition that can result in a stalled motor and cause the horizontal actuator
output shaft to break.
This service bulletin gives instructions for airplanes with powered Ipeco part number series 3A090 Captain's
seat or First Officer's seat installed. Corrective actions are necessary by an off-airplane inspection of the seat
by the applicable Ipeco service bulletin. Repeat on-airplane checks, at intervals not to exceed 36 months, are
necessary for the Captain's and First Officer's seats by the applicable Ipeco service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
7 of 68

### Page 8

This service bulletin gives instructions, for airplanes with Ipeco part number series 3A258 Captain's seat or First
Officer's seat installed, to find the part number and Amendment of the horizontal actuator of the Horizontal
Movement System (HMS). If the horizontal actuator has Artus part number AD8650503 at 'Amendment B' or
earlier or Artus part number AD8650502, corrective actions are necessary by an off-airplane inspection of the
seat by the applicable Ipeco service bulletin, signs of damage to the HMS make the replacement of the horizontal
actuator necessary. If the actuator continues to be Artus part number AD8650503 at 'Amendment B' or earlier
or Artus part number AD8650502, repeat checks are necessary for the Captain's and First Officer's seats by
the applicable Ipeco service bulletin. Installing the horizontal actuator Artus part number AD8650503 at
'Amendment C' or later will significantly decrease risk of the horizontal actuator output shaft breaking.
Boeing Service Related Problem (SRP) 757-SRP-25-0306 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 25-12002 is related to this problem.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
YesSpecial Tooling Required
ACTION
Do inspections and checks of the Captain's and First Officer's seats. Do corrective actions.
EFFECTIVITY
757-200 Airplane(s) with Ipeco part number series 3A090 and 3A258 Captain's and First Officer's powered
seats. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
8 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 9

COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
9 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 10 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
FIRST
OFFICER'S
SEAT
CAPTAIN'S
SEAT
DO INSPECTIONS AND CHECKS OF THE
CAPTAIN'S AND FIRST OFFICER'S SEATS.
DO CORRECTIVE ACTIONS.
FWD
CAPTAIN'S SEAT  2186544
(TYPICAL)
(FIRST OFFICER'S SEAT OPPOSITE)
Original Issue: November 07, 2017
Revision 1: June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-25-0308
Work - See page 1 for details.  10 of 68

### Page 11

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0308
Original Issue: November 07, 2017
Revision 1: June 07, 2018
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624N001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 757-200 Airplanes, with Ipeco part number series 3A090 and
3A258 Captain's and First Officer's powered seats, before line number 961, in 1 Group. The
Variable Numbers and Group Information for the applicable airplanes is given below. Refer to PRR
54530-316RS for data about this change.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
11 of 68

### Page 12

DESCRIPTIONCONFIGURATIONGROUP
757-200 Airplanes equipped with powered Ipeco Captain's and First
Officer's seats.
-1
Airplanes equipped with Ipeco powered Captain's seat, part number
series 3A090 and powered Ipeco First Officer's seat, part number
series 3A090.
1
Airplanes equipped with Ipeco Captain's seat, part number series
3A258 and powered Ipeco First Officer's seat, part number series
3A090.
2
Airplanes equipped with powered Ipeco Captain's seat, part number
series 3A090 and Ipeco First Officer's seat, part number series 3A258.
3
Airplanes equipped with Ipeco Captain's seat, part number series
3A258 and Ipeco First Officer's seat, part number series 3A258.
4
Airplane Models:
757-200
GroupVariable Number
1NC151
1NC161
1ND241 - ND248
1NE301 - NE302
1NP901 - NP904
1NT441 - NT442
1NT720 - NT730
1NT901 - NT916
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
3A090-0077-01-1
3A090-0078-01-1
3A258-0007-01-1
3A258-0008-01-1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
12 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 13

B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 210-25-05, Issue 4(a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 210-25-06, Issue 4(a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 258-25-15, Issue 4(c)(d)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 258-25-16, Issue 4(c)(d)Ipeco Holdings Ltd
(a) Applicable to Captain's seat part number 3A090-0077-01-1.
(b) Applicable to First Officer's seat part number 3A090-0078-01-1.
(c) Applicable to Captain's seat part number 3A258-0007-01-1.
(d) Applicable to First Officer's seat part number 3A258-0008-01-1.
C. Reason
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats
will have un-commanded seat movement because of horizontal actuator shaft failure. If this service
bulletin is not done, the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s)
could break and cause an un-commanded seat movement. Un-commanded seat movement could lead
to reduced controllability of the airplane.
An operator reported the Captain's seat could not be locked in position after the horizontal position of
the seat was adjusted in flight. The seat became unlocked from the track and moved freely forward
and aft. Control was given to the First Officer for approach and landing. An inspection found the horizontal
actuator output shaft had broken. When the horizontal actuator output shaft breaks, pilots cannot
prevent seat movement in a forward and aft direction and cannot lock the seat in position. A broken
shaft is the result of high loads, that are more than design limits, from a stalled motor, that can occur
due to high mechanical resistance to motion during powered operation of the seat. Any object that can
potentially impede seat movement (Foreign Object Debris (FOD)) in the seat tracks is another condition
that can result in a stalled motor and cause the horizontal actuator output shaft to break.
This service bulletin gives instructions for airplanes with powered Ipeco part number series 3A090
Captain's seat or First Officer's seat installed. Corrective actions are necessary by an off-airplane
inspection of the seat by the applicable Ipeco service bulletin. Repeat on-airplane checks, at intervals
not to exceed 36 months, are necessary for the Captain's and First Officer's seats by the applicable
Ipeco service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
13 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 14

This service bulletin gives instructions, for airplanes with Ipeco part number series 3A258 Captain's
seat or First Officer's seat installed, to find the part number and Amendment of the horizontal actuator
of the Horizontal Movement System (HMS). If the horizontal actuator has Artus part number AD8650503
at 'Amendment B' or earlier or Artus part number AD8650502, corrective actions are necessary by an
off-airplane inspection of the seat by the applicable Ipeco service bulletin, signs of damage to the HMS
make the replacement of the horizontal actuator necessary. If the actuator continues to be Artus part
number AD8650503 at 'Amendment B' or earlier or Artus part number AD8650502, repeat checks are
necessary for the Captain's and First Officer's seats by the applicable Ipeco service bulletin. Installing
the horizontal actuator Artus part number AD8650503 at 'Amendment C' or later will significantly
decrease risk of the horizontal actuator output shaft breaking.
Boeing Service Related Problem (SRP) 757-SRP-25-0306 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 25-12002 is related to this problem.
Revision 1 is sent to update the Concurrent Requirements to list the latest Ipeco service bulletin issue
numbers. Also, some conditions and the serviceable seat definition were changed to add clarity.
D. Description
Do inspections and checks of the Captain and First Officer's seats. Do corrective actions.
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212757-200
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Group 1, Configuration 1:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A, APPENDIX B, APPENDIX E and APPENDIX F.
Group 1, Configuration 2:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
B, APPENDIX C, APPENDIX F and APPENDIX G.
Group 1, Configuration 3:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A, APPENDIX D, APPENDIX E and APPENDIX H.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
14 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 15

Group 1, Configuration 4:
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
C, APPENDIX D, APPENDIX G and APPENDIX H.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1, Configuration 1, 3:
Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original Is-
sue date of this ser-
vice bulletin.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
DETAILED INSPECTION
All Airplanes.
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS PASSED (NO
FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 5.
-CONDITION 1 (ACTION -
3): Do the repeat actions
in accordance with Work
Package 5.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
15 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 16

Group 1, Configuration 1, 3:
Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS NOT PASSED (ANY
FINDINGS) -Within 120 days af-ter PART 1 was
done.
OPTION 1 (ACTION 2): Do
PART 3: CAPTAIN'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM OFF AIR-
PLANE OVERHAUL(a)
Refer to Paragraph
1.E., Compliance
Table 5.
-OPTION 1 (ACTION 3): Do
the repeat actions in accor-
dance with Work Package
5.
-Before further flight.OPTION 2 (ACTION 1): Do
PART 3: CAPTAIN'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM OFF AIR-
PLANE OVERHAUL(a)
Refer to Paragraph
1.E., Compliance
Table 5.
-OPTION 2 (ACTION 2): Do
the repeat actions in accor-
dance with Work Package
5.
(a) It is permitted to install a spare seat that has passed PART 1 or done PART 3.
Group 1, Configuration 1-2:
Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original Is-
sue date of this ser-
vice bulletin.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM DETAILED INSPEC-
TION
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
16 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 17

Group 1, Configuration 1-2:
Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS PASSED (NO
FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 6.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 6.
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS NOT PASSED (ANY
FINDINGS) -Within 120 days af-ter PART 2 was
done.
OPTION 1 (ACTION 2): Do
PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(a)
Refer to Paragraph
1.E., Compliance
Table 6.
-OPTION 1 (ACTION 3): Do
the repeat actions in accor-
dance with Work Package
6.
-Before further flight.OPTION 2 (ACTION 1): Do
PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(a)
Refer to Paragraph
1.E., Compliance
Table 6.
-OPTION 2 (ACTION 2): Do
the repeat actions in accor-
dance with Work Package
6.
(a) It is permitted to install a spare seat that has passed PART 2 or done PART 4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
17 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 18

Group 1, Configuration 2, 4:
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original Is-
sue date of this ser-
vice bulletin.
Do PART 5: CAPTAIN'S
SEAT, PART NUMBER
SERIES 3A258 - HORI-
ZONTAL ACTUATOR
IDENTIFICATION
All Airplanes.
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C'
OR LATER --CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Within 36 months
after the Original Is-
sue date of this ser-
vice bulletin.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
MOVEMENT SYSTEM
DETAILED INSPECTION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUM-
BER AD8650503 AT 'AMEND-
MENT C' OR LATER, OR THE
HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT
CANNOT BE FOUND
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS PASSED (NO
FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 7.
-CONDITION 1 (ACTION -
3): Do the repeat actions
in accordance with Work
Package 7.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
18 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 19

Group 1, Configuration 2, 4:
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS NOT PASSED (ANY
FINDINGS) -Within 120 days af-ter PART 1 was
done.
OPTION 1 (ACTION 2): Do
PART 3: CAPTAIN'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM OFF AIR-
PLANE OVERHAUL(b)
Refer to Paragraph
1.E., Compliance
Table 7.
-OPTION 1 (ACTION 3): Do
the repeat actions in accor-
dance with Work Package
7.
-Before further flight.OPTION 2 (ACTION 1): Do
PART 3: CAPTAIN'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM OFF AIR-
PLANE OVERHAUL(b)
Refer to Paragraph
1.E., Compliance
Table 7.
-OPTION 2 (ACTION 2): Do
the repeat actions in accor-
dance with Work Package
7.
-Before further flight.OPTION 3: Install a service-
able seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance with
this service bulletin.
(b) It is permitted to install a spare seat that has passed PART 1 or done PART 3.
Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Original Is-
sue date of this ser-
vice bulletin.
Do PART 6: FIRST OFFI-
CER'S SEAT, PART
NUMBER SERIES 3A258
- HORIZONTAL ACTUA-
TOR IDENTIFICATION
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
19 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 20

Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C'
OR LATER CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Within 36 months
after the Original Is-
sue date of this ser-
vice bulletin.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM DETAILED INSPEC-
TION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUM-
BER AD8650503 AT 'AMEND-
MENT C' OR LATER, OR THE
HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT
CANNOT BE FOUND
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS PASSED (NO
FINDINGS) CONDITION 1 (ACTION
2): Install seat.
Refer to Paragraph
1.E., Compliance
Table 8.
-CONDITION 1 (ACTION
3): Do the repeat actions
in accordance with Work
Package 8.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
20 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 21

Group 1, Configuration 3-4:
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.OPTION 1 (ACTION 1):
Install seat without power.
CONDITION 2: THE 'IPECO SER-
VICE BULLETIN, PART A - IN-
SPECTION' IS NOT PASSED (ANY
FINDINGS) -Within 120 days af-ter PART 2 was
done.
OPTION 1 (ACTION 2): Do
PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(b)
Refer to Paragraph
1.E., Compliance
Table 8.
-OPTION 1 (ACTION 3): Do
the repeat actions in accor-
dance with Work Package
8.
-Before further flight.OPTION 2 (ACTION 1): Do
PART 4: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL(b)
Refer to Paragraph
1.E., Compliance
Table 8.
-OPTION 2 (ACTION 2): Do
the repeat actions in accor-
dance with Work Package
8.
-Before further flight.OPTION 3: Install a service-
able seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for the First Officer's seat in ac-
cordance with this service bulletin.
(b) It is permitted to install a spare seat that has passed PART 2 or done PART 4.
Group 1, Configuration 1, 3:
Table 5: WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.Within 36 months
after WORK PACK-
AGE 1 was accom-
plished.
Do PART 7: CAPTAIN'S
SEAT HORIZONTAL
MOVEMENT SYSTEM ON
AIRPLANE CHECKS AND
CORRECTIVE ACTION
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
21 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 22

Group 1, Configuration 1-2:
Table 6: WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZON-
TAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.Within 36 months
after WORK PACK-
AGE 2 was accom-
plished.
Do PART 8: FIRST OFFI-
CER'S SEAT HORIZON-
TAL MOVEMENT SYS-
TEM ON AIRPLANE
CHECKS AND CORREC-
TIVE ACTION
All Airplanes.
Group 1, Configuration 2, 4:
Table 7: WORK PACKAGE 7- CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.(a)Within 36 months
after WORK PACK-
AGE 3 was accom-
plished.
Do PART 5: CAPTAIN'S
SEAT, PART NUMBER
SERIES 3A258 - HORI-
ZONTAL ACTUATOR
IDENTIFICATION
All Airplanes.
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C'
OR LATER --CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Before further flight.OPTION 1: Do PART 7:
CAPTAIN'S SEAT HORI-
ZONTAL MOVEMENT
SYSTEM ON AIRPLANE
CHECKS AND CORREC-
TIVE ACTION.
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUM-
BER AD8650503 AT 'AMEND-
MENT C' OR LATER, OR THE
HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT
CANNOT BE FOUND OPTION 2: Install a service-
able seat.(a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance with
this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
22 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 23

Group 1, Configuration 3-4:
Table 8: WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
36 months.(a)Within 36 months
after WORK PACK-
AGE 4 was accom-
plished.
Do PART 6: FIRST OFFI-
CER'S SEAT, PART
NUMBER SERIES 3A258
- HORIZONTAL ACTUA-
TOR IDENTIFICATION
All Airplanes.
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE HORIZONTAL
ACTUATOR IS PART NUMBER
AD8650503 AT 'AMENDMENT C'
OR LATER CONDITION 3 (ACTION
2): No further action re-
quired.(a)
-Before further flight.OPTION 1: Do PART 8:
FIRST OFFICER'S SEAT
HORIZONTAL MOVE-
MENT SYSTEM ON AIR-
PLANE CHECKS AND
CORRECTIVE ACTION
CONDITION 4: THE HORIZONTAL
ACTUATOR IS NOT PART NUM-
BER AD8650503 AT 'AMEND-
MENT C' OR LATER, OR THE
HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT
CANNOT BE FOUND OPTION 2: Install a service-
able seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for the First Officer's seat in ac-
cordance with this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
23 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 24

• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Group 1, Configuration 1, 3:
WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.400.802Seat Removal
0.250.251Seat Power Adjustment
System Deactivation (a)
0.300.301FIGURE 1
0.400.802Seat Installation
0.250.251Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.400.802Seat Removal
0.250.251Seat Power Adjustment
System Deactivation (a)
0.300.301FIGURE 2
0.400.802Seat Installation
0.250.251Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
24 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 25

Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 2, 4:
WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 1
0.400.802Seat Removal
0.250.251Seat Power Adjustment
System Deactivation (a)
0.400.802Seat Installation
0.250.251Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 2
0.400.802Seat Removal
0.250.251Seat Power Adjustment
System Deactivation (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
25 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 26

Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.400.802Seat Installation
0.250.251Operational Test
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 2 Option 1.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 1, 3:
WORK PACKAGE 5 - CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
(a)Do PART 7
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Refer to the applicable supplier service bulletin(s).
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 1-2:
WORK PACKAGE 6 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZON-
TAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
(a)Do PART 8
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Refer to the applicable supplier service bulletin(s).
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
26 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 27

Group 1, Configuration 2, 4:
WORK PACKAGE 7 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 1
0.400.802Seat Removal (a)
0.400.802Seat Installation (a)
0.250.251Operational Test (a)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 2.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
Group 1, Configuration 3-4:
WORK PACKAGE 8 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
0.250.251Find the Part Number and
Amendment of the Horizon-
tal Actuator
0.300.301FIGURE 2
0.400.802Seat Removal (a)
0.400.802Seat Installation (a)
0.250.251Operational Test (a)
0.250.251Close Access
(b)(b)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 2.
(b) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
The time to do the work in accordance with the applicable Ipeco service bulletin(s) is not included in
the manpower estimate.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
27 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 28

H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 54530-316RS
b. Boeing Service Related Problem (SRP) 757-SRP-25-0306
c. Service Bulletin Index D624N001
d. 757 Aircraft Maintenance Manual (AMM) 25-11-01
e. 757 Fleet Team Digest (FTD) 25-12002
f. 757 Master Minimum Equipment List (MMEL) 25-11-01-01
g. Ipeco Component Maintenance Manual (CMM) CMM 25-11-26
h. Ipeco Service Bulletin 210-25-05, 210-25-06, 258-25-15, 258-25-16
NOTE: The supplier was told to send copies of each service bulletin to each operator.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-11757 Aircraft Maintenance Manual
11-31, 25-11757 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
28 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 29

L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
29 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 30

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
30 of 68
BOEING SERVICE BULLETIN 757-25-0308
BLANK PAGE

### Page 31

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesExisting Part NumberNameQTYPart Number /
Specification
(a)3A090-0077-01-1Seat Assembly - Captain13A090-0077-01-1
(a)3A090-0078-01-1Seat Assembly - F/O13A090-0078-01-1
(b)3A258-0007-01-1Seat Assembly - Captain13A258-0007-01-1
(b)3A258-0008-01-1Seat Assembly - F/O13A258-0008-01-1
(a) Refer to Ipeco SB 210-25-06.
(b) Refer to Ipeco SB 258-25-16.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
NotesNew Part NumberNameQTYExisting Part
Number
(a)(c)-Seat Assembly - Cap-
tain
13A090-0077-01-1
(a)(c)-Seat Assembly - F/O13A090-0078-01-1
(b)(c)-Seat Assembly - Cap-
tain
13A258-0007-01-1
(b)(c)-Seat Assembly - F/O13A258-0008-01-1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
31 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 32

NotesNew Part NumberNameQTYExisting Part
Number
(a) Make the change in accordance with Ipeco SB 210-25-06.
(b) Make the change in accordance with Ipeco SB 258-25-16.
(c) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
E. Special Tooling - Price and Availability
Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
F. Special Tooling Necessary to do this Service Bulletin
Refer to Ipeco SB 210-25-06 or Ipeco SB 258-25-16.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
32 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 33

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do work packages
1 and 2 or 4, and 3 and 2 or 4, independently. You can do subsequent work packages
5 and 6 or 8, and 7 and 6 or 8, independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 757-200 Structural Repair
Manual, Chapter 51.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Refer to APPENDIX A, APPENDIX B, APPENDIX C, APPENDIX D, APPENDIX E,
APPENDIX F, APPENDIX G and APPENDIX H for logic diagram(s). Logic diagrams
are provided as an aid only. Information contained in Paragraph 1.E., Compliance
is the primary source for compliance times. Information in Paragraph 3.B., Work
Instructions is the primary source for tasks required for compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
33 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 34

8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
11. The CONDITIONS, ACTIONS and OPTIONS shown apply to the Captain's and First
Officer's seats independently.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as "RC", including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt" then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
14. For part number series 3A258 seats, horizontal actuator part number AD8650503
identified in the Paragraph 3.B., Work Instructions and the Figures is the Artus identity.
This actuator also has an Ipeco identity, which is part number 2A258-0487.
15. A serviceable Captain's seat in this service bulletin is defined as one with part number
3A258-0007-01-1Z, or as one with part number 3A258-0007-01-1 that has a horizontal
actuator with Artus part number AD8650503 at 'Amendment C' or later. Installation
of a serviceable Captain's seat is a terminating action to the repeat inspections in
this service bulletin.
16. A serviceable First Officer's seat in this service bulletin is defined as one with part
number 3A258-0008-01-1Z, or as one with part number 3A258-0008-01-1 that has
a horizontal actuator with Artus part number AD8650503 at 'Amendment C' or later.
Installation of a serviceable First Officer's seat is a terminating action to the repeat
inspections in this service bulletin.
17. Foreign Object Debris (FOD) in this service bulletin can include coins, tools, nuts,
bolts, or any object that can potentially impede seat movement.
18. Findings from the 'Ipeco service bulletin Part A - Inspection', can include damaged,
defective, missing, inoperable, or maladjusted limit switches, horizontal actuator, or
horizontal pinion.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
34 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 35

B. WORK INSTRUCTIONS
Group 1, Configuration 1, 3:
WORK PACKAGE 1 - CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE
HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
a. CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 5.
Refer to Paragraph 1.E., Compliance.
b. CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
(1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat that has done PART 1. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) Deactivate the power adjustment system of the seat in accordance with 757 Master
Minimum Equipment List (MMEL) 25-11-01-01.
(2) OPTION 1 (ACTION 2): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT
SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 5. Refer
to Paragraph 1.E., Compliance.
(4) OPTION 2 (ACTION 1): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT
SYSTEM OFF AIRPLANE OVERHAUL
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
35 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 36

(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or done PART
3.
(5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package 5. Refer
to Paragraph 1.E., Compliance.
c. RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM 25-11-01 as
an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1-2:
WORK PACKAGE 2 - FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF
THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
a. CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 6.
Refer to Paragraph 1.E., Compliance.
b. CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
(1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat that has done PART 2. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) Deactivate the power adjustment system of the seat in accordance with 757 Master
Minimum Equipment List (MMEL) 25-11-01-01.
(2) OPTION 1 (ACTION 2): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
36 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 37

(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package 6. Refer
to Paragraph 1.E., Compliance.
(4) OPTION 2 (ACTION 1): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or done PART
4.
(5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package 6. Refer
to Paragraph 1.E., Compliance.
c. RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM 25-11-01 as
an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 2, 4:
WORK PACKAGE 3 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 3 (ACTION 2): No further action required.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) Do PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
37 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 38

(a) CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 1.
2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work
Package 7. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install a seat that has done PART 1. Refer to 757 AMM 25-11-01 as an
accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
757 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or
done PART 3.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
7. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 3: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 1 or
done PART 3.
5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
7. Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
38 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 39

6) OPTION 3: Install a serviceable seat:
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph
3.A., General Information, is a terminating action to the repeat
inspections for the Captain's seat in accordance with this service
bulletin.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
(c) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 3-4:
WORK PACKAGE 4 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 3 (ACTION 2): No further action required.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
(a) CONDITION 1: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 2.
2) CONDITION 1 (ACTION 2): Install seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
3) CONDITION 1 (ACTION 3): Do the repeat actions in accordance with Work
Package 8. Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
39 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 40

(b) CONDITION 2: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install seat without power:
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install a seat that has done PART 2. Refer to 757 AMM 25-11-01 as an
accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
757 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or
done PART 4.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
8. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: It is permitted to install a spare seat that has passed PART 2 or
done PART 4.
5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
8. Refer to Paragraph 1.E., Compliance.
6) OPTION 3: Install a serviceable seat:
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph
3.A., General Information, is a terminating action to the repeat
inspections for the First Officer's seat in accordance with this service
bulletin.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
40 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 41

(c) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1, 3:
WORK PACKAGE 5: CAPTAIN'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
a. Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b. Continue to do the repeat actions in accordance with Work Package 5. Refer to Paragraph
1.E., Compliance.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 1-2:
WORK PACKAGE 6: FIRST OFFICER'S SEAT - REPEAT ACTIONS - CHECK OF THE HORIZONTAL
MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
a. Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b. Continue to do the repeat actions in accordance with Work Package 6. Refer to Paragraph
1.E., Compliance.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 2, 4:
WORK PACKAGE 7: CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 3 (ACTION 2): No further action required.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
41 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 42

b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON
AIRPLANE CHECKS AND CORRECTIVE ACTION
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Continue to do the repeat actions in accordance with Work Package 7. Refer to
Paragraph 1.E., Compliance.
(2) OPTION 2: Install a serviceable seat:
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's
seat in accordance with this service bulletin.
(a) Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(c) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Group 1, Configuration 3-4:
WORK PACKAGE 8: FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
a. CONDITION 3: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 3 (ACTION 2): No further action required.
b. CONDITION 4: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM
ON AIRPLANE CHECKS AND CORRECTIVE ACTION
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
42 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 43

(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Continue to do the repeat actions in accordance with Work Package 8. Refer to
Paragraph 1.E., Compliance.
(2) OPTION 2: Install a serviceable seat:
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for the
First Officer's seat in accordance with this service bulletin.
(a) Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(c) Install a serviceable seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
(d) RC Exempt - Do the electrical operational check of the seat. Refer to 757 AMM
25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
PART 1: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4033A090-0077-01-1
Ipeco SB 258-25-16(a)S232T311-33A258-0007-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B.,
Concurrent Requirements.
PART 2: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
43 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 44

IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4043A090-0078-01-1
Ipeco SB 258-25-16(a)S232T311-43A258-0008-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B.,
Concurrent Requirements.
PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
1. Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4033A090-0077-01-1
Ipeco SB 258-25-16(a)S232T311-33A258-0007-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B.,
Concurrent Requirements.
PART 4: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE
OVERHAUL
1. Remove seat. Refer to 757 AMM 25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-06(a)S232T303-4043A090-0078-01-1
Ipeco SB 258-25-16(a)S232T311-43A258-0008-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B.,
Concurrent Requirements.
Group 1, Configuration 2, 4:
PART 5: CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
1. Find the Artus part number and 'Amendment' of the horizontal actuator that is installed on the seat.
a. Captain's seat part number 3A258-0007-01-1Z has a horizontal actuator with Artus part number
AD8650503 at 'Amendment C' or later. For Captain's seats with other part numbers,
maintenance records can be used if the part number and Amendment of the horizontal actuator
can be identified. If maintenance records are not available or the part number and amendment
cannot be identified from maintenance records, inspect to find the part number and Amendment
of the horizontal actuator installed on the seat. Refer to APPENDIX I.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
44 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 45

NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat
in accordance with this service bulletin.
Group 1, Configuration 3-4:
PART 6: FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL ACTUATOR
IDENTIFICATION
1. Find the part number and 'Amendment' of the horizontal actuator that is installed on the seat.
a. First Officer's seat part number 3A258-0008-01-1Z has a horizontal actuator with Artus part
number AD8650503 at 'Amendment C' or later. For First Officer's seats with other part numbers,
maintenance records can be used if the part number and Amendment of the horizontal actuator
can be identified. If maintenance records are not available or the part number and amendment
cannot be identified from maintenance records, inspect to find the part number and Amendment
of the horizontal actuator installed on the seat. Refer to APPENDIX I.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the First Officer's
seat in accordance with this service bulletin.
PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS AND
CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-05(a)S232T303-4033A090-0077-01-1
Ipeco SB 258-25-15(a)S232T311-33A258-0007-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B.,
Concurrent Requirements.
PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS
AND CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table(s) below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 210-25-05(a)S232T303-4043A090-0078-01-1
Ipeco SB 258-25-15(a)S232T311-43A258-0008-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B.,
Concurrent Requirements.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1: June 07, 2018
45 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 46 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
FWD
CAPTAIN'S SEAT  2547885
(TYPICAL)
(LEFT SIDE VIEW)
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 1 OF 2)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-25-0308
Work - See page 1 for details.  46 of 68

### Page 47

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD.
--FODRemove1
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1 June 07, 2018
47 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 48 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
FWD
FIRST OFFICER'S SEAT  (TYPICAL)  2547886
(LEFT SIDE VIEW)
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 1 OF 2)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-25-0308
Work - See page 1 for details.  48 of 68

### Page 49

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD.
--FODRemove1
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1 June 07, 2018
49 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 50

This Appendix applies only to: Group 1, Configuration 1, 3.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
PART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIR-
PLANE OVERHAUL
PART 3
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
-CAPTAIN’S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1 June 07, 2018
50 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 51 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK  PACKAGE 5  2561213
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
-CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-25-0308
Work - See page 1 for details.  51 of 68

### Page 52 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  WITHOUT POWER  INSTALL SEAT  OPTION 2 (ACTION 1):  DO PART 3
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 1  WAS DONE  DO THE REPEAT ACTIONS  IN ACCORDANCE WITH
WORK PACKAGE 5
OPTION 1 (ACTION 2):
DO PART 3
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 5
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
-CAPTAIN'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
SYSTEM
(SHEET 3 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-25-0308
Work - See page 1 for details.  52 of 68

### Page 53

This Appendix applies only to: Group 1, Configuration 1-2.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DE-
TAILED INSPECTION
PART 2
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF
AIRPLANE OVERHAUL
PART 4
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
APPENDIX B:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2-
FIRST OFFICER'S SEAT – DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1 June 07, 2018
53 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 54 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 2
CONDITION 1  CONDITION 2
V
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK  2561215
PACKAGE 6
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2-
FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-25-0308
Work - See page 1 for details.  54 of 68

### Page 55 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  INSTALL SEAT  OPTION 2 (ACTION 1):
DO PART 4
WITHOUT POWER
WITHIN 120 DAYS  AFTER PART 2  DO THE REPEAT ACTIONS  OPTION 2 (ACTION 2):
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 6
OPTION 1 (ACTION 2):
DO PART 4
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 6  2561216
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2-
FIRST OFFICER'S SEAT - DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT
(SHEET 3 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-25-0308
Work - See page 1 for details.  55 of 68

### Page 56

This Appendix applies only to: Group 1, Configuration 2, 4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
PART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIR-
PLANE OVERHAUL
PART 3
CAPTAIN'S SEAT, PART NUMBER SERIES 3A258 - HORIZONTAL
ACTUATOR IDENTIFICATION
PART 5
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 3
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503
AT 'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR
PART NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
Installation of a serviceable Captain's seat as defined in Paragraph
3.A.,General Information, is a terminating action to the repeat inspections
for the Captain's seat in accordance with this service bulletin.
(a)
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN’S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1 June 07, 2018
56 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 57 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 5
CONDITION 3  CONDITION 4
BEFORE FURTHER  WITHIN 36 MONTHS AFTER THE
FLIGHT  ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
CONDITION 3 (ACTION 1):  DO PART 1
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 3 (ACTION 2):  CONDITION 1  CONDITION 2
NO FURTHER ACTION
a)  REQUIRED
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 7  2561217
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  757-25-0308  57 of 68

### Page 58 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  INSTALL SEAT  OPTION 2 (ACTION 1):  DO PART 3  INSTALL A  OPTION 3:
WITHOUT POWER  SERVICEABLE SEAT
(a)
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 1  DO THE REPEAT ACTIONS
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 7
OPTION 1 (ACTION 2):
DO PART 3
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH  WORK PACKAGE 7  2561219
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3-
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 3 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-25-0308
Work - See page 1 for details.  58 of 68

### Page 59

This Appendix applies only to: Group 1, Configuration 3-4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DE-
TAILED INSPECTION
PART 2
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF
AIRPLANE OVERHAUL
PART 4
FIRST OFFICER'S SEAT, PART NUMBER SERIES 3A258 - HORIZON-
TAL ACTUATOR IDENTIFICATION
PART 6
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED
(NO FINDINGS)
CONDITION 1
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
CONDITION 2
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 3
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503
AT 'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR
PART NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
Installation of a serviceable First Officer's seat as defined in Paragraph
3.A.,General Information, is a terminating action to the repeat inspections
for the First Officer's seat in accordance with this service bulletin.
(a)
APPENDIX D:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4-
FIRST OFFICER'S SEAT – HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND
OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 07, 2017
757-25-0308Revision 1 June 07, 2018
59 of 68
BOEING SERVICE BULLETIN 757-25-0308

### Page 60 (OCR)

BOEING SERVICE BULLETIN 757-25-0308
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 6
CONDITION 3  CONDITION 4
BEFORE FURTHER  WITHIN 36 MONTHS AFTER THE
FLIGHT  ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
CONDITION 3 (ACTION 1):  DO PART 2
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 3 (ACTION 2):  CONDITION 1  CONDITION 2
NO FURTHER ACTION
a)  REQUIRED
BEFORE FURTHER
FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACKS
ARE CLEAR OF FOD
CONDITION 1 (ACTION 2):
INSTALL SEAT
CONDITION 1 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 8  2561221
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4-
FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND
OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 3)
Original Issue: November 07, 2017
Revision 1 June 07, 2018  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-25-0308
Work - See page 1 for details.  60 of 68

The text continues at https://openairdocs.org/service-documents/boeing/sb-757-25-0308/file/dd6b5c0189f2.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
