# Boeing Special Attention Service Bulletin 757-25-0309: Revision 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0473; AD 2025-20-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 757-25-0309](https://openairdocs.org/service-documents/boeing/sb-757-25-0309.md)
- Title as filed: Boeing_SB-757-25-0309-Rev02
- Pages: 33
- PDF: https://openairdocs.org/files/sha256/19/ea/19ea812d96c36098ca18b240ab7939dec6d19b0ae6d468332c0717fc9bd252e8
- Page: https://openairdocs.org/service-documents/boeing/sb-757-25-0309/file/19ea812d96c3

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0309
Original Issue: June 11, 2014
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat Part Number Inspection - Manual Override Adjustment Check
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
1 of 33
2.0

### Page 2

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
2 of 33
BOEING SERVICE BULLETIN 757-25-0309
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 18
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 21
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 1: FLIGHT COMPARTMENT SEATS - SEAT PART NUMBER INSPECTION . . . . . . . . . 32
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
3 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 4

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
4 of 33
BOEING SERVICE BULLETIN 757-25-0309
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 757-25-0309Original Issue: June 11, 2014
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat Part Number Inspection - Manual Override Adjustment Check
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-26-03 is related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Effects of this Revision on airplanes on which the Original Issue or Revision 1 was previously done:
ActionConditionGroup
Do 'Captain's and First Officer's Seats In-
spection and Manual Override Cable Ad-
justment With Any Ipeco Seat Part Number
3A090-0077-01-1, 3A090-0078-01-1,
3A258-0007-01-1Z or 3A258-0008-01-1Z
in accordance with Work Instructions.
Airplanes that have inspected and
have done all applicable corrective
actions for the installed Captain's and
First Officer's seats that were identified
in the Original Issue or Revision 1 of
this service bulletin.
Group 1, Configuration 2
REASON FOR REVISION
This revision is sent to add new requirements for Ipeco seat part numbers 3A090-0077-01-1, 3A090-0078-01-1,
3A258-0007-01-1Z and 3A258-0008-01-1Z. This revision is also sent to list newer issue numbers for each
concurrent supplier service bulletin, and to add conditional information for Ipeco seats that used specific revisions
of Ipeco Component Maintenance Manuals (CMMs) to do manual override cable maintenance.
These sections were changed:
1. In Summary, Background, changed information and the AD related information in the planning table.
Added Service Related Problem (SRP) reference and corrected typographical errors.
2. In Summary, Action, changed and added information.
3. In Summary, Effectivity, added information.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
5 of 33

### Page 6

4. In Summary, Compliance, changed information and added AD information.
5. In Summary, Illustration, changed and added information.
6. In Paragraph 1.A.1., Airplanes, changed the Group description and added Configurations for Group 1.
Listed specific line numbers and line number ranges. Changed information about the applicable airplanes.
7. In Paragraph 1.A.2., Spares Affected, changed information and added part numbers.
8. In Paragraph 1.B., Concurrent Requirements, changed to give the newest issue of each supplier service
bulletin. Corrected part numbers in the footnotes and added footnotes (e) and (f).
9. In Paragraph 1.C., Reason, changed and added information, added Service Related Problem (SRP)
reference and Revision 2 information. Corrected typographical errors.
10. In Paragraph 1.D., Description, change and added information. Added Revision 2 information.
11. In Paragraph 1.E., Compliance, added and changed information, and added applicability.
12. In Paragraph 1.F., Approval, added Alternative Method Of Compliance (AMOC) paragraph. Added
'Union'.
13. In Paragraph 1.G., Manpower, added footnote (e), changed tasks and information. Removed the total
Task and Elapsed Hours.
14. In Paragraph 1.J.1., Existing Data, added references and changed the note.
15. In Paragraph 2.C.2., Parts and Materials Supplied by the Operator, changed information.
16. In Paragraph 2.D., Parts Necessary to Change Spares, changed information.
17. In Paragraph 3.A., General Information, corrected note 3, changed note 8 and added notes 9 and 10.
18. In Paragraph 3.B., Work Instructions:
a. Changed and added work instructions which include added seat part numbers, and Ipeco
Component Maintenance Manual (CMM) and Ipeco Service Bulletin references.
b. Added the title 'Captain's and First Officer's Seats Inspection and Manual Override Cable Adjustment'
to an instruction list and added an instruction list titled 'Captain's and First Officer's Seats Inspection
and Manual Override Cable Adjustment With Any Ipeco Seat Part Number 3A090-0077-01-1,
3A090-0078-01-1, 3A258-0007-01-1Z or 3A258-0008-01-1Z.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
June 11, 2014Original Issue:
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
6 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 7

July 02, 2018Revision 1:
June 12, 2023Revision 2:
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
7 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 8

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
8 of 33
BOEING SERVICE BULLETIN 757-25-0309
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-25-0309Original Issue: June 11, 2014
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat Part Number Inspection - Manual Override Adjustment Check
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will make sure that Captain's and First officer's seats do not have
un-commanded movement due to an improperly adjusted cable for the manual release lever. A manual control
lever cable that is improperly adjusted could result in its clutch mechanism not engaging correctly and cause
an un-commanded seat movement. If this service bulletin is not done, an un-commanded seat movement during
a critical part of a flight, such as take-off or landing may occur, causing a flight control obstruction or unintended
flight control input which could result in the loss of the ability to control the airplane.
A 747 operator reported that during a takeoff, the First Officer's seat unlocked from its seat tracks and moved
aft. The First Officer was unable to control the airplane and the captain took over the controls to avoid a rejected
takeoff. The unlocking of the seat from the seat tracks was caused by actuator damage which was a result of
incorrect adjustment of the seats manual release lever cable, allowing the clutch mechanism to only partially
engage. Because 757 airplanes use some of the same seats in the flight compartment, Boeing has issued this
service bulletin to do a one-time adjustment check in accordance with an Ipeco Service Bulletin. Two Ipeco
Service Bulletins have been issued to account for different part number seats installed. Because of in-service
seat interchangeability, operators are told to inspect the part number of the seats installed and use the applicable
Ipeco Service Bulletin.
This service bulletin gives instructions to find the part number of the installed Captain's and First Officer's seats,
and to do an inspection, and if necessary, an adjustment, of each affected seats' fore/aft manual control lever
and vertical manual control lever in accordance with an Ipeco Service Bulletin. The inspection, and if necessary,
the adjustment, of the manual control levers of the Captain's and First Officer's seats, will make sure that the
seats do not have un-commanded seat movement due to improperly adjusted fore/aft and vertical manual control
levers.
Boeing Service Related Problems (SRP) 757-SRP-25-0320 and 757-SRP-25-0418 are related to this service
bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 25-13001 is related to this service bulletin.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
9 of 33

### Page 10

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected
(Flight Crew Operations Manual and
FAA Approved Airplane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Find the part number of the installed Captain's and First Officer's seats. Find their manual override cable
maintenance history. For each affected Captain's and First Officer's seat, do a Detailed Inspection of the fore/aft
manual control lever and the vertical manual control lever on each seat for looseness in accordance with the
applicable Ipeco Service Bulletin. If a control lever inspection is not within limits, remove the seat and install a
serviceable seat. Do an operational test of each adjusted seat.
NOTE: A serviceable seat in this service bulletin is defined as part number 3A258-0007-01-2 (Captain's) and
part number 3A258-0008-01-2 (First Officer's), or it is a seat that has done the inspections and all
applicable corrective actions in accordance with the applicable Ipeco service bulletin. Or, it is a seat
that has done manual override cable maintenance in accordance with the applicable Ipeco Component
Maintenance Manual (CMM).
EFFECTIVITY
757-200 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-26-03 is related to this service bulletin.
The effective date of AD 2018-26-03 is January 31, 2019.
Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
10 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 11

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and adjustment check given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
11 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 12 (OCR)

BOEING SERVICE BULLETIN 757-25-0309
FIRST OFFICER'S
SEAT
FIND THE PART NUMBER OF THE
INSTALLED CAPTAIN'S AND FIRST
OFFICER'S SEATS. FIND THEIR
MANUAL OVERRIDE CABLE
MAINTENANCE HISTORY.
FOR EACH AFFECTED CAPTAIN'S AND
FIRST OFFICER'S SEAT, DO A DETAILED
INSPECTION OF THE VERTICAL MANUAL
CONTROL LEVER FOR LOOSENESS IN
ACCORDANCE WITH THE APPLICABLE
IPECO SERVICE BULLETIN. IF A
CONTROL LEVER INSPECTION IS NOT
WITHIN LIMITS, REMOVE THE SEAT AND
INSTALL A SERVICEABLE SEAT. DO AN
OPERAT  JONAL TEST  - OF EACH
ADJUSTED SEAT.
CAPTAIN'S SEAT
FIRST OFFICER'S SEAT OPPOSITE
(TYPICAL)
(LEFT SIDE VIEW)
FOR EACH AFFECTED CAPTAIN'S AND
FIRST OFFICER'S SEAT, DO A DETAILED
INSPECTION OF THE FORE/AFT MANUAL
CONTROL LEVER FOR LOOSENESS IN
WD  ACCORDANCE WITH THE APPLICABLE
CAPTAIN'S SEAT  IPECO SERVICE BULLETIN. IF A
FIRST OFFICER'S SEAT OPPOSITE  CONTROL LEVER INSPECTION IS NOT
(RIGHT SIDE VIEW)  (TYPICAL)  OPERATIONAL TEST OF EACH  INSTALL A SERVICEABLE SEAT. DO AN  WITHIN LIMITS, REMOVE THE SEAT AND
ADJUSTED SEAT.  2311443
Original Issue: June 11, 2014
Revision 2: June 12, 2023  Export Controlled ECCN: 9E991  757-25-0309
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.  12 of 33

### Page 13

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0309
Original Issue: June 11, 2014
Revision 2: June 12, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat Part Number Inspection - Manual Override Adjustment Check
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This bulletin is applicable to 757-200 Airplane(s), line number(s) 553, 561, 572, 588, 591, 593,
603, 616-617, 620, 731, 739, 783, 787, 824, 829, 860, 863, 875, 881, 886, 889, 897, 900, 902,
905, 920, 924, 927, 934-944, 948-949, 953, 955, 959 in 1 Group(s). Where the effectivity is
presented with hyphens between line numbers, the airplane applicability means "through" and
"inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Refer to Service Bulletin Index D624N001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
757-200 Airplanes equipped with powered Ipeco Captain's and First
Officer's seats part number series 3A090 and 3A258
-1
Airplanes that have not done the Original Issue or Revision 1 of this
service bulletin
1
Airplanes that have done the Original Issue or Revision 1 of this
service bulletin
2
Airplane Models:
757-200
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
13 of 33

### Page 14

GroupVariable Number
1NC151
1NC161
1ND241 - ND248
GroupVariable Number
1NE301 - NE302
1NP901 - NP904
1NT441 - NT442
GroupVariable Number
1NT720 - NT730
1NT901 - NT916
--
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
3A090-0077-01-1
3A090-0078-01-1
3A258-0007-01-1
3A258-0007-01-1Z
3A258-0008-01-1
3A258-0008-01-1Z
B. Concurrent Requirements
The service bulletin(s) listed below must be done at the same time as this service bulletin:
DescriptionService BulletinCompany
Captain's and First Officer's seat manual
override cable adjustment check.
Ipeco SB 210-25-04 Issue 2 or Issue 3
(a)(b)
Ipeco Holdings Ltd
Captain's and First Officer's seat manual
override cable adjustment check.
Ipeco SB 258-25-08 Issue 4 or Issue 5 or
Issue 6
Ipeco Holdings Ltd
(c)(d)(e)(f)
(a) Applicable to Captain's seat part number 3A090-0077-01-1.
(b) Applicable to First Officer's seat part number 3A090-0078-01-1.
(c) Issues 4 and 5 are applicable to Captain's seat part number 3A258-0007-01-1.
(d) Issues 4 and 5 are applicable to First Officer's seat part number 3A258-0008-01-1.
(e) Issue 6 is applicable to Captain's seat part numbers 3A258-0007-01-1 and 3A258-0007-01-1Z.
(f) Issue 6 is applicable to First Officer's seat part numbers 3A258-0008-01-1 and 3A258-0008-01-1Z.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
14 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 15

C. Reason
Accomplishment of this service bulletin will make sure that Captain's and First Officer's seats do not
have un-commanded movement due to an improperly adjusted cable for the manual release lever. A
manual control lever cable that is improperly adjusted could result in its clutch mechanism not engaging
correctly and cause an un-commanded seat movement. If this service bulletin is not done, an
un-commanded seat movement during a critical part of a flight, such as take-off or landing may occur,
causing a flight control obstruction or unintended flight control input which could result in the loss of
the ability to control the airplane.
A 747 operator reported that during a takeoff, the First Officer's seat unlocked from its seat tracks and
moved aft. The First Officer was unable to control the airplane and the captain took over the controls
to avoid a rejected takeoff. The unlocking of the seat from the seat tracks was caused by actuator
damage which was a result of incorrect adjustment of the seats manual release lever cable, allowing
the clutch mechanism to only partially engage. Because 757 airplanes use some of the same seats in
the flight compartment, Boeing has issued this service bulletin to do a one-time adjustment check in
accordance with an Ipeco Service Bulletin. Two Ipeco Service Bulletins have been issued to account
for different part number seats installed. Because of in-service seat interchangeability, operators are
told to inspect the part number of the seats installed and use the applicable Ipeco Service Bulletin.
This service bulletin gives instructions to find the part number of the installed Captain's and First Officer's
seats, and to do an inspection, and if necessary, an adjustment, of each affected seats' fore/aft manual
control lever and vertical manual control lever in accordance with an Ipeco Service Bulletin. The
inspection, and if necessary, the adjustment, of the manual control levers of the Captain's and First
Officer's seats, will make sure that the seats do not have un-commanded seat movement due to
improperly adjusted fore/aft and vertical manual control levers.
Boeing Service Related Problems (SRP) 757-SRP-25-0320 and 757-SRP-25-0418 are related to this
service bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 25-13001 is related to this service bulletin.
Revision 1 was sent to update the concurrent requirements table to list the current issues of the Ipeco
service bulletins.
Revision 2 is sent to add new requirements for Ipeco seat part numbers 3A090-0077-01-1,
3A090-0078-01-1, 3A258-0007-01-1Z and 3A258-0008-01-1Z. This revision is also sent to list newer
issue numbers for each concurrent supplier service bulletin, and to add conditional information for Ipeco
seats that used specific revisions of Ipeco Component Maintenance Manuals (CMMs) to do manual
override cable maintenance.
D. Description
Find the part number of the installed Captain's and First Officer's seats. Find their manual override
cable maintenance history. For each affected Captain's and First Officer's seat, do a Detailed Inspection
of the fore/aft manual control lever and the vertical manual control lever on each seat for looseness in
accordance with the applicable Ipeco Service Bulletin. If a control lever inspection is not within limits,
remove the seat and install a serviceable seat. Do an operational test of each adjusted seat.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
15 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 16

NOTE: A serviceable seat in this service bulletin is defined as part number 3A258-0007-01-2
(Captain's) and part number 3A258-0008-01-2 (First Officer's), or it is a seat that has done
the inspections and all applicable corrective actions in accordance with the applicable Ipeco
service bulletin. Or, it is a seat that has done manual override cable maintenance done in
accordance with the applicable Ipeco Component Maintenance Manual (CMM).
Effects of Revision 2 on airplanes on which the Original Issue or Revision 1 was previously done:
ActionConditionGroup
Do 'Captain's and First Officer's Seats In-
spection and Manual Override Cable Ad-
justment With Any Ipeco Seat Part Number
3A090-0077-01-1, 3A090-0078-01-1,
3A258-0007-01-1Z or 3A258-0008-01-1Z
in accordance with Work Instructions.
Airplanes that have inspected and
have done all applicable corrective
actions for the installed Captain's and
First Officer's seats that were identified
in the Original Issue or Revision 1 of
this service bulletin.
Group 1, Configuration 2
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212757-200
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-26-03 is related to this service
bulletin. The effective date of AD 2018-26-03 is January 31, 2019.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
Boeing recommends that the 'Captain's and First Officer's Seats Inspection and Manual Override Cable
Adjustment With Any Ipeco Seat Part Number 3A090-0077-01-1, 3A090-0078-01-1, 3A258-0007-01-1Z
or 3A258-0008-01-1Z given in this service bulletin be done within 36 months after the Revision 2 date
of this service bulletin.
Group 1, Configuration 1:
Boeing recommends that the 'Captain's and First Officer's Seats Inspection and Manual Override Cable
Adjustment' given in this service bulletin be done within 72 months after the Original Issue date of this
service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
16 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 17

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the inspections,
adjustments and installation defined in SB 757-25-0309, Revision 2 as an alternative method of
compliance to accomplishing the inspections, adjustments and installation required by paragraph (i)
of AD 2018-26-03. All provisions of AD 2018-26-03 that are not specifically referenced in the above
statement remain fully applicable and must be complied with accordingly.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Elapsed HoursTask HoursNumber of
Persons
Task
0.050.051Open Access
0.200.201FIGURE 1(e)
0.750.751Removal of the Captain's Seat (a)
0.750.751Installation of the Captain's Seat (b)
0.750.751Removal of the First Officer's Seat (a)
0.750.751Installation of the First Officer's Seat (b)
0.250.251Operational Test of the Captain's Seat (c)
0.250.251Operational Test of the First Officer's Seat (c)
0.050.051Close Access
(d)(d)TOTAL FOR EACH AIRPLANE
(a) Only necessary if it is not possible to adjust the seat with the seat installed.
(b) Only necessary if the seat was removed.
(c) Only necessary if the seat was adjusted in accordance with the applicable Ipeco Service Bulletin or if
a new seat is installed.
(d) The total task hours and elapsed hours are not given as the work necessary for each airplane is variable.
(e) Only necessary if maintenance documentation cannot be used to find the part number of the seat(s).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
17 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 18

For affected seat(s), the time to do the inspection and adjustment in accordance with Ipeco SB 210-25-04
and Ipeco SB 258-25-08 is not included.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 757-SRP-25-0320, 757-SRP-25-0418
b. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2018-26-03
c. Service Bulletin Index D624N001
d. 757 Aircraft Maintenance Manual (AMM) 25-11-01
e. 757 Fleet Team Digest (FTD) 25-13001
f. Ipeco Component Maintenance Manual (CMM) 25-10-78, 25-11-26
g. Ipeco Service Bulletin Ipeco SB 210-25-04, Ipeco SB 258-25-08
NOTE: The supplier was told to send copies of the service bulletins to each operator.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
18 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 19

L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
19 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 20

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
20 of 33
BOEING SERVICE BULLETIN 757-25-0309
BLANK PAGE

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and adjustment check given in this service
bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
No parts or materials are necessary to do the change in this service bulletin. But, parts and materials
in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator part
and material supply to make sure all necessary parts and materials are available.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
Refer to Ipeco SB 210-25-04 or Ipeco SB 258-25-08.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
21 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 22

Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
22 of 33
BOEING SERVICE BULLETIN 757-25-0309
BLANK PAGE

### Page 23

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for airframe maintenance tasks are included in Chapter 20 of 757
Airplane Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
6. This service bulletin includes operational test procedures for the systems changed
by this service bulletin. More operational tests can possibly be necessary in
accordance with standard maintenance practices because of interruption to other
airplane systems.
7. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
23 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 24

8. Some steps in the Work Instructions are labeled as Required for Compliance (RC).If
this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as "RC", including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt" then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
9. The compliance times for the actions in Paragraph 3.B., Work Instructions are in
Paragraph 1.E., Compliance.
10. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors,
magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures
may be required.
B. WORK INSTRUCTIONS
Group 1, Configuration 1:
Captain's and First Officer's Seats Inspection and Manual Override Cable Adjustment
1. Get access to the flight compartment.
2. RC - Inspect to find the part number of the installed Captain's and First Officer's seats in accordance
with FIGURE 1, and do the action(s) that follow:
NOTE: If the part number of the Captain's and First Officer's seats that are installed on the airplane
can be found from a review of maintenance documentation, it is not necessary to do
FIGURE 1.
a. If the installed Captain's seat has the Ipeco part number given in the table below and this seat
has done manual override cable maintenance in accordance with the Ipeco CMM given in the
table below, no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-26,S232T311-33A258-0007-01-1
Revision 16 or later
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
24 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 25

b. RC - If the installed Captain's seat has the Ipeco part number given in the table below, and
this seat has not done manual override cable maintenance, or this seat has done manual
override cable maintenance in accordance with an Ipeco CMM not given in the table below,
or the manual override cable maintenance history of this seat is not known, do a Detailed
Inspection of the fore/aft manual control lever and the vertical manual control lever of the
Captain's seat for looseness in accordance with the applicable Ipeco Service Bulletin given
in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Is-
sue 6
S232T311-33A258-0007-01-1
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6,
do the steps that follow:
(a) RC Exempt - Remove the Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0007-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6, no
more work is necessary on the Captain's seat.
c. If the installed First Officer's seat has the Ipeco part number given in the table below and this
seat and the manual override cable has not done maintenance in accordance with the Ipeco
Component Maintenance Manual given in the table below, no further action is required for
this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-26S232T311-43A258-0008-01-1
Revision 16 or later
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
25 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 26

d. RC - If the installed First Officer's seat has the Ipeco part number given in the table below,
and this seat has not done manual override cable maintenance, or this seat and the manual
override cable has not done maintenance in accordance with the Ipeco Component
Maintenance Manual not given in the table below, or the manual override cable maintenance
history of this seat is not known, do a Detailed Inspection of the fore/aft manual control lever
and the vertical manual control lever of the First Officer's seat for looseness in accordance
with the applicable Ipeco Service Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Is-
sue 6
S232T311-43A258-0008-01-1
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6,
do the steps that follow:
(a) RC Exempt - Remove the First Officer's seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with the
applicable Ipeco Service Bulletin with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as seat
part number 3A258-0008-01-2, or is a First Officer's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a First Officer's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6, no
more work is necessary on the First Officer's seat.
3. For each Captain's and First Officer's seat that had its fore/aft manual control lever adjusted, do
the test that follows. If the Captain's or First Officer's seat fails the test, do corrective actions and
repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the fore/aft manual control
lever.
c. Move the seat to the aft most position and release the control lever.
d. Make sure that the seat locks in the aft most position.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
26 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 27

e. Operate the fore/aft manual control lever.
f. Move the seat to the forward most position and release the control lever.
g. Make sure that the seat locks in the forward most position.
4. For each Captain's and First Officer's seat that had its vertical manual control lever adjusted, do
the test that follows. If the Captain's or First Officer's seat fails the test, do corrective actions and
repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the vertical manual control
lever.
c. Make sure that the seat locks in the highest position.
d. Operate the vertical manual control lever.
e. Move the seat to the lowest position and release the control lever.
f. Make sure that the seat locks in the lowest position.
5. Put the airplane back to a serviceable condition.
Captain's and First Officer's Seats Inspection and Manual Override Cable Adjustment With Any
Ipeco Seat Part Number 3A090-0077-01-1, 3A090-0078-01-1, 3A258-0007-01-1Z or 3A258-0008-01-1Z
1. Get access to the flight compartment.
2. RC - Inspect to find the part number of the installed Captain's and First Officer's seats in accordance
with FIGURE 1, and do the action(s) that follow:
NOTE: If the part number of the Captain's and First Officer's seats that are installed on the airplane
can be found from a review of maintenance documentation, it is not necessary to do
FIGURE 1.
a. If the installed Captain's seat has an Ipeco part number given in the table below and this seat
has done manual override cable maintenance in accordance with the Ipeco CMM given in the
table below, no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-10-78S332T303-4033A090-0077-01-1
Revision 20 or later
CMM 25-11-26S232T311-33A258-0007-01-1Z
Revision 16 or later
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
27 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 28

b. RC - If the installed Captain's seat has the Ipeco part number given in the table below, and
this seat has not done manual override cable maintenance, or this seat has done manual
override cable maintenance in accordance with an Ipeco CMM not given in the table below,
or the manual override cable maintenance history of this seat is not known, do a Detailed
Inspection of the fore/aft manual control lever and the vertical manual control lever of the
Captain's seat for looseness in accordance with the applicable Ipeco Service Bulletin given
in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26Ipeco SB 258-25-08,
Issue 6
S232T311-33A258-0007-01-1Z
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 6, do the steps that follow:
(a) RC Exempt - Remove the Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 258-25-08,
Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0007-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 6, no more work is necessary
on the Captain's seat.
c. RC - If the installed Captain's seat has the Ipeco part number given in the table below, and
this seat has not done manual override cable maintenance, or this seat has done manual
override cable maintenance in accordance with an Ipeco CMM not given in the table below,
or the manual override cable maintenance history of this seat is not known, do a Detailed
Inspection of the fore/aft manual control lever and the vertical manual control lever of the
Captain's seat for looseness in accordance with the applicable Ipeco Service Bulletin given
in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-10-78Ipeco SB 210-25-04,
Issue 2 or Issue 3
S332T303-4033A090-0077-01-1
Revision 20 or later
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
28 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 29

(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 210-25-04, Issue 2 or Issue 3, do the steps
that follow:
(a) RC Exempt - Remove the Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 210-25-04,
Issue 2 or Issue 3, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as one that
has done the inspections and all applicable corrective actions in accordance
with the applicable Ipeco service bulletin. Or, it is a Captain's seat that has
done manual override cable maintenance in accordance with the applicable
Ipeco CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 210-25-04, Issue 2 or Issue 3, no more work
is necessary on the Captain's seat.
d. If the installed First Officer's seat has an Ipeco part number given in the table below and this
seat has done manual override cable maintenance in accordance with the Ipeco CMM given
in the table below, no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-10-78S232T303-4043A090-0078-01-1
Revision 20 or later
CMM 25-11-26S232T311-43A258-0008-01-1Z
Revision 16 or later
e. RC - If the installed First Officer's seat has the Ipeco part number given in the table below,
and this seat has not done manual override cable maintenance, or this seat and the manual
override cable has not done maintenance in accordance with the Ipeco Component
Maintenance Manual not given in the table below, or the manual override cable maintenance
history of this seat is not known, do a Detailed Inspection of the fore/aft manual control lever
and the vertical manual control lever of the First Officer's seat for looseness in accordance
with the applicable Ipeco Service Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26Ipeco SB 258-25-08,
Issue 6
S232T311-43A258-0008-01-1Z
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 6, do the steps that follow:
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
29 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 30

(a) RC Exempt - Remove the First Officer's seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with Ipeco
SB 258-25-08, Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0008-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in the applicable Ipeco Service Bulletin, no more work is
necessary on the Captain's seat.
f. RC - If the installed First Officer's seat has the Ipeco part number given in the table below,
and this seat has not done manual override cable maintenance, or this seat and the manual
override cable has not done maintenance in accordance with the Ipeco Component
Maintenance Manual not given in the table below, or the manual override cable maintenance
history of this seat is not known, do a Detailed Inspection of the fore/aft manual control lever
and the vertical manual control lever of the First Officer's seat for looseness in accordance
with the applicable Ipeco Service Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-10-78Ipeco SB 210-25-04,
Issue 2 or Issue 3
S232T303-4043A090-0078-01-1
Revision 20 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 210-25-04, Issue 2 or Issue 3, do the steps
that follow:
(a) RC Exempt - Remove the First Officer's seat. Refer to 757 AMM 25-11-01 as an
accepted procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with Ipeco
SB 210-25-04, Issue 2 or Issue 3, with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 757 AMM 25-11-01 as an accepted
procedure.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
30 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 31

NOTE: A serviceable First Officer's seat in this service bulletin is defined as one
that has done the inspections and all applicable corrective actions in
accordance with the applicable Ipeco service bulletin. Or, it is a First Officer's
seat that has done manual override cable maintenance in accordance with
the applicable Ipeco CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 210-25-04, Issue 2 or Issue 3, no more work
is necessary on the First Officer's seat.
3. For each Captain's and First Officer's seat that had its fore/aft manual control lever adjusted, do
the test that follows. If the Captain's or First Officer's seat fails the test, do corrective actions and
repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the fore/aft manual control
lever.
c. Move the seat to the aft most position and release the control lever.
d. Make sure that the seat locks in the aft most position.
e. Operate the fore/aft manual control lever.
f. Move the seat to the forward most position and release the control lever.
g. Make sure that the seat locks in the forward most position.
4. For each Captain's and First Officer's seat that had its vertical manual control lever adjusted, do
the test that follows. If the Captain's or First Officer's seat fails the test, do corrective actions and
repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the vertical manual control
lever.
c. Make sure that the seat locks in the highest position.
d. Operate the vertical manual control lever.
e. Move the seat to the lowest position and release the control lever.
f. Make sure that the seat locks in the lowest position.
5. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2: June 12, 2023
31 of 33
BOEING SERVICE BULLETIN 757-25-0309

### Page 32 (OCR)

BOEING SERVICE BULLETIN 757-25-0309
CAPTAIN'S SEAT
TYPICA
EFT SIDE VIEW
FIRST OFFICER'S SEAT
(TYPICAL)
(LEFT SIDE VIEW)
2311442
FIGURE 1: FLIGHT COMPARTMENT SEATS - SEAT PART NUMBER INSPECTION
(SHEET 1 OF 2)
Original Issue: June 11, 2014
Revision 2 June 12, 2023  Export Controlled ECCN: 9E991  BOEING PROPRIETARY  757-25-0309
Copyright © Unpublished Work - See page 1 for details.  32 of 33

### Page 33

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1-Captain's SeatInspect1
(a)1-First Officer's SeatInspect2
(a) Inspect the seat to determine the seat part number.
FIGURE 1: FLIGHT COMPARTMENT SEATS - SEAT PART NUMBER INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 11, 2014
757-25-0309Revision 2 June 12, 2023
33 of 33
BOEING SERVICE BULLETIN 757-25-0309

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
