# Boeing Service Bulletin 757-54-0034: U.S. DOT/FAA - Service Information - 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-1109; AD 2013-10-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 757-54-0034](https://openairdocs.org/service-documents/boeing/sb-757-54-0034.md)
- Title as filed: U.S. DOT/FAA - Service Information - 2
- Pages: 270
- PDF: https://openairdocs.org/files/sha256/f9/be/f9bef4596d7951aa62ee48c0264890745b066398329f6eeaef372f8ab5bfa76f
- Page: https://openairdocs.org/service-documents/boeing/sb-757-54-0034/file/f9bef4596d79

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 270
 
 
 
Commercial
Airplane
Group 757
Service Bulletin
Number: 757-54-0034
Date: May 14, 1998
Revision 2: May 07, 2009
ATA System: 5451 5720
SUBJECT: NACELLES/PYLONS - Pratt and Whitney Powered Airplanes - Nacelle Strut and Wing 
Structural Improvement
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 1998 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10, 
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or 
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document 
or otherwise.

### Page 2

BLANK PAGE
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
BLANK PAGE

### Page 3

Table of Contents
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
Table of Contents
Revision Transmittal Sheet .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  14
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  18
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  19
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  20
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  20
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  21
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  23
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  33
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  34
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  35
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  35
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   35
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  36
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  39
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  39
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  39
FIGURE  1:  OVERVIEW - WING AND STRUT MODIFICATION  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  49
FIGURE  2:  STRUT WORKSTAND  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  54
FIGURE  3:  REMOVAL - SPECIFIED FASTENERS   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  59
FIGURE  4:  DISCARD/KEEPS - STRUT REMOVAL  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  60
FIGURE  5:  INSTALLATION - STRUT ON STRUT WORKSTAND  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  67
FIGURE  6: PROTECTION - DRY BAY BULKHEAD.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  68
FIGURE  7:  INSPECT/MACHINE - MIDDLE GUSSET - INBOARD SIDE LOAD FITTING  .  .  .  .  .  .  .  70
FIGURE  8:  INSTALLATION - FASTENERS IN SIDE LOAD FITTINGS   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  72
FIGURE  9:  REMOVAL - SUPPORT FITTING AND SIDE-LINK FITTING   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  79
FIGURE  10:  HOLE TRANSFER AND SPOTFACE - SIDE-LINK FITTING .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  85
FIGURE  11:  HOLE TRANSFER AND SPOTFACE - SUPPORT FITTING  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  94

### Page 4

Table of Contents
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
FIGURE  12:  INSTALLATION - SIDE-LINK FITTINGS, SUPPORT FITTINGS AND TENSION CLIP .  107
FIGURE  13:  REMOVAL - AFT STRUT FAIRINGS AND MID-SPAR FITTING FASTENERS .  .  .  .  .  123
FIGURE  14:  HOLE TRANSFER - MID-SPAR FITTINGS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  129
FIGURE  15:  REMOVAL - AFT BULKHEAD AND MIDSPAR FITTINGS   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  142
FIGURE  16:  INITIAL INSTALLATION - NEW MID-SPAR AND SIDE-LINK FITTINGS  .  .  .  .  .  .  .  .  146
FIGURE  17:  DRILL/REAM/INSTALLATION - MID-SPAR AND SIDE-LINK FITTINGS  .  .  .  .  .  .  .  .  156
FIGURE  18:  DRILL - HORIZONTAL TANGS OF THE MID-SPAR FITTINGS.  .  .  .  .  .  .  .  .  .  .  .  .  170
FIGURE  19: INSTALLATION - MID-SPAR FITTINGS AND AFT BULKHEAD ONTO STRUT.  .  .  .  .  176
FIGURE  20: MODIFICATION - AFT STRUT FAIRING .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  191
FIGURE  21: MODIFICATION - CLOSEOUT PANEL.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  196
FIGURE  22:  INSTALLATION - AFT STRUT FAIRINGS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  197
FIGURE  23: APPLICATION - LEVELING COMPOUND ON STRUT   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  212
FIGURE  24: INSTALLATION - AFT STRUT FAIRINGS, ANGLES, AND CLIPS.  .  .  .  .  .  .  .  .  .  .  .  219
FIGURE  25:  INSTALLATION - STRUT TO WING AND SIDE-LINK FITTINGS .  .  .  .  .  .  .  .  .  .  .  .  223
FIGURE  26: INSTALLATION - STRUT FASTENERS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  236
FIGURE  27: MEASURE/BORE - DIAGONAL BRACE (GROUP 1 ONLY) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  237
FIGURE  28: CHAMFER BORE - DIAGONAL BRACE (GROUP 1 ONLY) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  249
FIGURE  29: INSTALLATION - DIAGONAL BRACE BUSHINGS (GROUP 1 ONLY)  .  .  .  .  .  .  .  .  .  253
FIGURE  30: INSTALLATION - DIAGONAL BRACE (GROUP 1 ONLY) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  264
APPENDIX  A:  EXISTING PARTS ACCOUNTABILITY  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  269

### Page 5

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 270
 
 
 
Commercial
Airplanes
757
Service Bulletin
Number: 757-54-0034 Revision Transmittal Sheet
Original Issue: May 14, 1998
Revision 2: May 07, 2009
ATA System: 5451 5720
SUBJECT: NACELLES/PYLONS - Pratt and Whitney Powered Airplanes - Nacelle Strut and Wing 
Structural Improvement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed as shown in the previous issues of this service bulletin.
Federal Aviation Administration (FAA) Airworthiness Directives 97-18-05 and 2003-18-05 are related to this 
service bulletin.
REASON FOR REVISION
This revision is sent to make these changes:
— Boeing Service Related Problem (SRP) 757-SRP-54-0123 is added to the Summary section and to 
Paragraph 1.C., Reason.
— The Industry Support Information is updated in the Summary section and Paragraph 2.B., Industry Support 
Information.
— Reference to service bulletin 757-54-0036 is removed from Paragraph 1.E., Compliance
and added to Paragraph 1.B., Concurrent Requirements.
— FAA Airworthiness Directive 2000-20-09 is removed and replaced by FAA Airworthiness Directive 
2003-18-05 in the Summary section Compliance, Paragraph 1.E., Compliance and Paragraph 1.F., 
Approval.
— Service Bulletin 757-71A0085 is added to the recommended bulletins table in Paragraph 1.D., Description 
and Paragraph 1.J., References.
— FAA Airworthiness Directive 2006-07-21 is added to the terminated bulletins table in Paragraph 1.D., 
Description, Paragraph 1.E., Compliance, Paragraph 1.F., Approval and Paragraph 1.J., References.
— FAA Airworthiness Directive 2006-09-02 is added to the recommended bulletins table in Paragraph 1.D., 
Description and Paragraph 1.J., References.
— Appendix A - Existing Parts Accountability is added.
— Change the term "Examine" to "Inspect" to be consistent with FAR 1.1 definition of "maintenance".
— The manpower estimate is increased in the Summary section and Paragraph 1.G., Manpower.
— Typographical error in Figure 4, Sheet 1, lower View A is corrected. "Line Number 1-618, Without SB 
757-54-0027" is changed to "Line Number 1-618, With SB 757-54-0027".
— The drying time of the primer and the part numbers of the primer and sealant are corrected in Figure 23, 
Step 6.
— A note detailing an optional procedure for applying the leveling compound is added to Figure 23, Step 9 
and to the Work Instructions Paragraph 3.B.4. Part IV - Strut Structure Changes.
— Removed the "minute" symbols and replaced them with the word "Degrees" in Figure 23, Sheet 3 and 4.

### Page 6

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
The data given in Information Notice 757-54-0034 IN 01 is included in this revision. Information Notice 
757-54-0034 IN 01 was sent to correct the PART NUMBER and NOTES information given in Step 6 of Figure 23.
The data given in Information Notice 757-54-0034 IN 02 is included in this revision. Information Notice 
757-54-0034 IN 02 was sent to advise operators of an increase in the man-hour estimate for this service bulletin.
Paragraph 1.A., Effectivity, shows changes of airplane operators. Each operator should examine the Effectivity 
paragraph for changes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location 
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
Original Release: May 14, 1998
Revision 1: October 11, 2001
Revision 2: May 7, 2009

### Page 7

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 270
 
 
 
Commercial
Airplane
Group 757
Service Bulletin
Number: 757-54-0034 Summary
Date: May 14, 1998
Revision 2: May 07, 2009
ATA System: 5451 5720
SUBJECT: NACELLES/PYLONS - Pratt and Whitney Powered Airplanes - Nacelle Strut and Wing 
Structural Improvement
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
A structural reassessment and a review of the structural inspection planning data (SIPD) document were 
completed for the 757 airplane. Data from flight tests, fatigue tests, and in-service experience were used to 
complete the reassessment and review. The flight test data included the results from tests on the 747, 757, and 
767 airplanes and found that the operational loads of the nacelle were higher than those used during the initial 
design. Subsequent analysis, which included data from the in-service experience and the fatigue tests, shows 
that fatigue cracks can occur in the primary strut structure before the airplane gets to the 757 design service 
objective of 20 years, or 50,000 flight cycles. The analysis also shows that these fatigue cracks can increase in 
length at a much faster rate than the rate used for the development of the initial SIPD document.
In-service experience for the 757 Pratt and Whitney airplane includes cracks in many wing-to-strut fuse bolts 
(mid spar fuse pins) and one bent fuse pin in the diagonal brace. 
As a result of the structural reassessment and review of the SIPD document, components of the strut and wing 
were identified for design changes. These changes became a part of the 757/767 Strut Improvement Program 
(SIP) and were shown to 757/767 operators at a technical review meeting held by Boeing in July 1995. As one 
result of the technical review meeting a Structures Task Group (STG), which included personnel from the 
operators and Boeing, (monitored by the FAA and CAA), was given the task to examine the data and make 
recommendations for the SIP. Boeing held a total of three STG meetings for the 757 part of the SIP, and the 
members completed their review of the STG data in February 1996. 
As part of a service bulletin validation program, this change was completed on airplane NC024 before the initial 
release of the service bulletin. (Airplane NC024 was the configuration of a Group 1 airplane.)
Boeing Service Related Problem (SRP) 757-SRP-54-0123 is related to this service bulletin.

### Page 8

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
ACTION (PRR 54687)
Remove the struts from the wing. During removal, discard the side brace link assemblies, and the diagonal 
brace. On the wing remove and replace fasteners in the inboard and outboard side load fitting assemblies. 
Remove and discard the side link fitting assembly and the side link support fitting from the wing. Install a new 
side link fitting assembly and a new side link support fitting. Also, install a tension clip to increase the strength 
of the wing structure.
Remove and keep the intermediate seal and closeout panel. Remove and discard the closeout angle. Remove 
and keep the aft bulkhead and lower spar fitting assembly. Remove and discard the mid-spar fittings, and the 
side load fittings from the strut. Install the aft bulkhead and lower spar fitting assembly and new mid-spar fittings 
and side load fittings to the strut. Install a new closure angle. Make modifications to the intermediate seal and 
closeout panel and install on the strut.
Install the strut to the wing with new wing to strut fuse bolts, new side brace links, and new side link fuse pins. 
Group 1: Install a new diagonal brace with the existing fuse pin and bolt. Group 2: Install existing diagonal brace, 
fuse pin and bolt.
EFFECTIVITY
757-200/-200PF airplanes with Pratt and Whitney engines. Refer to Paragraph 1.A.1., Airplanes for the list of 
affected airplanes.
COMPLIANCE
See Service Bulletin Paragraph 1.E. for compliance information.
Federal Aviation Administration (FAA) Airworthiness Directives 97-18-05 and 2003-18-05 are related to this 
service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing Industry Support information is provided in Program Letter 6-1151-757/767PGM-120R3 to be released 
in the 2nd quarter 2008. Additional copies of program letters are available from Boeing Product Assurance 
Contracts.
MANPOWER
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Total Task Hours Elapsed Hours
1,317 306.25

### Page 9

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
MAKE CHANGES TO STRUT STRUCTURE
MAKE CHANGES TO STRUT
INSTALLATION COMPONENTS
MAKE CHANGES TO WING STRUCTURE
R97348

### Page 10

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
BLANK PAGE

### Page 11

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 270
 
 
 
Commercial
Airplanes
757
Service Bulletin
Number: 757-54-0034
Original Issue: May 14, 1998
Revision 2: May 07, 2009
ATA System: 5451 5720
SUBJECT: NACELLES/PYLONS - Pratt and Whitney Powered Airplanes - Nacelle Strut and Wing 
Structural Improvement
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624N001 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. Refer to PRR 54687 for data about this 
change.
Airplane models:
757-200 757-200PF
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AIR ITALY  (RIT)
1 NC057 NE162–NE164
AIR ITALY POLSKA  (IPL)
1 NE301
ALADIA AIRLINES  (TPT)
1 NC066
BOEING  (TBC)
1 NA001
GROUP CONFIGURATION DESCRIPTION
1 - 757-200 Passenger Airplanes,  Line Numbers 1 
through 732 with Pratt and Whitney engines.
2 - 757-200PF Airplanes, Line Numbers 139 
through 581 with Pratt and Whitney engines.

### Page 12

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
BOEING CAPITAL CORPORATION  (ZMF)
1N E 3 0 2
CAM  (CGM)
1N A 5 2 0
DELTA AIR LINES  (DAL)
1 NA501–NA519 NA521–NA586 NB001–NB004 NC076
EAGLE AVIATION  (EAE)
1 NC052 NC067
ETHIOPIAN AIRLINES  (ETH)
1 NE201–NE204
2 NC951
FEDEX  (FED)
1N B 1 6 7
GENERIC CUSTOMER/SUPPLIER  (XXX)
1 NC023
ILFC  (ILF)
1 NC056 NC072–NC073
L-3 C.I.S.  (CIY)
1 NC051 NC070 NC075
L'AVION  (EYS)
1N E 0 0 3 N E 1 6 6
NORTHWEST AIRLINES  (NWA)
1 NC001–NC022 NC024–NC033 NE311–NE325
PRIMARIS AIRLINES INC.  (PIM)
1N E 1 6 1
ROYAL AIR MAROC  (RAM)
1 NC041–NC042
SAUDI ROYAL FLIGHT  (SRF)
1N B 1 6 8
SHANGHAI AIRLINES  (SHA)
1 NE004–NE007
SHANGHAI AIRLINES CARGO  (CIX)
1 NE001–NE002
SUNEXPRESS  (SNS)
1 NC068–NC069 NC071

### Page 13

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
TACV-CABO VERDE AIRLINES  (TCV)
1 NC074
UNITED AIR LINES  (UAL)
1 NE011–NE088 NE092–NE094 NE141–NE150
UPS  (UPS)
2 NC901–NC935
UZBEKISTAN AIRWAYS  (UZB)
1 NC151
VIM AVIA  (VIM)
1 NE165 NE167–NE177
IDENTIFICATION BY VARIABLE NUMBER
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts 
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for 
the recommended use.
Variable  Group
NA001 1
NA501–NA586 1
NB001–NB004 1
NB166–NB168 1
NC001–NC033 1
NC041–NC042 1
NC051–NC052 1
NC056–NC057 1
NC066–NC076 1
NC151 1
NC901–NC935 2
NC951 2
NE001–NE007 1
NE011–NE088 1
NE091–NE094 1
NE141–NE150 1
NE161–NE177 1
NE201–NE204 1
NE301–NE302 1
NE311–NE325 1

### Page 14

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
B. Concurrent Requirements
The service bulletins listed below must be done before or at the same time as this service bulletin:
C. Reason
The structural changes given in this service bulletin will increase the strength and durability of the strut 
installation. The increase in strength and durability will give the structural components the damage 
tolerance rating necessary for continued operations without special inspections and/or scheduled 
component replacement.
A structural reassessment and a review of the Structural Inspection Planning Data (SIPD) document 
were completed for the 757 airplane. Data from flight tests, fatigue tests, and in-service experience 
were used to complete the reassessment and review. The flight test data included the results from 
tests on the 747, 757, and 767 airplanes and found that the operational loads of the nacelle were 
higher than those used during the initial design. Subsequent analysis, which included data from the 
in-service experience and the fatigue tests, shows that fatigue cracks can occur in the primary strut 
structure before the airplane gets to the 757 design service objective of 20 years, or 50,000 flight 
cycles. The analysis also shows that these fatigue cracks can increase in length at a much faster rate 
than the rate used for the development of the initial SIPD document.
In-service experience for the 757 Pratt and Whitney airplane includes cracks in many wing-to-strut 
fuse bolts (mid spar fuse pins) and one bent fuse pin in the diagonal brace. 
As a result of the structural reassessment and review of the SIPD document, components of the strut 
and wing were identified for design changes. These changes became a part of the 757/767 Strut 
Improvement Program (SIP) and were shown to 757/767 operators at a technical review meeting held 
by Boeing in July 1995. As one result of the technical review meeting a Structures Task Group (STG), 
which included personnel from the operators and Boeing, (monitored by the FAA and CAA), was given 
the task to examine the data and make recommendations for the SIP. Boeing held a total of three STG 
meetings for the 757 part of the SIP, and the members completed their review of the STG data in 
February 1996.       
As part of a service bulletin validation program, this change was completed on airplane NC024 before 
the release of the service bulletin. (Airplane NC024 has the configuration of a Group 1 airplane.)
Boeing Service Related Problem (SRP) 757-SRP-54-0123 is related to this service bulletin.
Revision 1 was sent to change the sequence of some figures and the work given in them.
Revision 2 is sent to make these changes:
— Boeing Service Related Problem (SRP) 757-SRP-54-0123 is added to the Summary section and 
to Paragraph 1.C., Reason.
Company Service Bulletin Description
Boeing 757-54-0036 Original 
Issue, Revision 1
NACELLES/PYLONS - Nacelle Strut - Upper 
Link Replacement - Strut Improvement Program 
- Pratt and Whitney Powered Airplanes
Boeing 757-54-0027 Revision 1 
(a)
NACELLES/PYLONS - Pylon Attach Pins/Bolts - 
Diagonal Brace Fuse Pins and Upper Link Fuse 
Pins - Inspection and Replacement
(a) Applicable to airplane line numbers 1 - 618 only.

### Page 15

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— The Industry Support Information is updated in the Summary section and Paragraph 2.B., 
Industry Support Information.
— Reference to service bulletin 757-54-0036 is removed from Paragraph 1.E., Compliance
and added to Paragraph 1.B., Concurrent Requirements.
— FAA Airworthiness Directive 2000-20-09 is removed and replaced by FAA Airworthiness 
Directive 2003-18-05 in the Summary section Compliance, Paragraph 1.E., Compliance and 
Paragraph 1.F., Approval.
— Service Bulletin 757-71A0085 is added to the recommended bulletins table in Paragraph 1.D., 
Description and Paragraph 1.J., References.
— FAA Airworthiness Directive 2006-07-21 is added to the terminated bulletins table in Paragraph 
1.D., Description, Paragraph 1.E., Compliance, Paragraph 1.F., Approval and Paragraph 1.J., 
References.
— FAA Airworthiness Directive 2006-09-02 is added to the recommended bulletins table in 
Paragraph 1.D., Description and Paragraph 1.J., References.
— Appendix A - Existing Parts Accountability is added.
— Change the term "Examine" to "Inspect" to be consistent with FAR 1.1 definition of 
"maintenance".
— The manpower estimate is increased in the Summary section and Paragraph 1.G., Manpower.
— Typographical error in Figure 4, Sheet 1, lower View A is corrected. "Line Number 1-618, Without 
SB 757-54-0027" is changed to "Line Number 1-618, With SB 757-54-0027".
— The drying time of the primer and the part numbers of the primer and sealant are corrected in 
Figure 23, Step 6.
— A note detailing an optional procedure for applying the leveling compound is added to Figure 23, 
Step 9 and to the Work Instructions Paragraph 3.B.4. Part IV - Strut Structure Changes.
— Removed the "minute" symbols and replaced them with the word "Degrees" in Figure 23, Sheet 
3 and 4.
D. Description
Remove the struts from the wing. During removal, discard the side brace link assemblies, and the 
diagonal brace (Group 1 only).
On the wing structure, remove and replace the fasteners in the inboard and outboard side load fittings 
with stronger fasteners. At some of the fastener locations coldwork the holes and install fasteners with 
larger diameters. Remove the side link fitting assembly and the side link support fitting from the wing. 
Use a transfer tool to make a copy of the hole pattern in the existing side link fitting assembly. Use a 
transfer tool to make a copy of the existing hole pattern used for the installation of the side link support 
fitting on the front spar. Use the patterns to put the holes in the new side link fitting assembly and the 
new side link support fitting. Install the new fittings to the wing structure. During the installation of the 
fittings install a tension clip to increase the strength of the wing structure.   
Put the struts on workstands. Remove and keep the intermediate seal and closeout panel. Put the 
intermediate seal on a workbench and make a modification to the web and two brackets. Put the 
closeout panel on a workbench and replace two doublers on the panel. Remove and discard the 
closeout angle.

### Page 16

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
Before more disassembly of the strut, use the Locating/Drilling tool to make a copy of the hole pattern 
of the mid-spar fittings. Remove and keep the aft bulkhead and lower spar fitting assembly. Remove 
and discard the mid-spar fittings, and the side load fittings from the strut. Use the pattern to put the 
holes in the new mid-spar fittings and side load fittings. Put the existing aft bulkhead and lower spar 
fitting assembly and the mid-spar fittings and side load fittings into the stand for the Locating/Drilling 
tool and drill the mid-spar fitting and side load fitting holes. Install the aft bulkhead and lower spar fitting 
assembly and new mid-spar fittings and side load fittings to the strut. Use part of the Locating/Drilling 
tool as a index tool to get the correct location of the mid-spar fittings during the installation. Install a 
new closure angle, the intermediate seal and closeout panel on the strut.         
Put the struts in position below the wing and install new wing to strut fuse bolts, new side brace link 
assemblies, and new side link fuse pins. Install the Upper Link shown in Service Bulletin 757-54-0036. 
Group 1: Use a measuring tool to find the distance between the two attach fittings for the diagonal 
brace. Bore and install bushings in the forward end of the new diagonal brace with the special tools. 
Install the diagonal brace between the strut and the wing. Group 2: Install the existing diagonal brace 
between the strut and the wing.     
Boeing service bulletins related to the change given in this service bulletin are shown in the tables, 
below. These bulletins were examined by the 757 STG and put in four categories.   Table I - Strut 
Improvement Bulletins: This table shows the structural changes that must be done before or at the 
same time this service bulletin is completed. These changes are necessary to keep the damage 
tolerance rating for continued operations without special inspections. Table II - Terminated Bulletins: 
This table shows the bulletins that are terminated either in part or completely by this bulletin. Table III 
- Recommended: This table shows the structural changes that do not have a direct effect on the 
damage tolerance rating of the strut structure, but are important in-service problems with primary 
structure that can be corrected before or at the same time this service bulletin is completed. Table IV 
- Common Access, shows the changes that are recommended for installation while the strut is 
removed from the wing.   
TABLE I - STRUT IMPROVEMENT BULLETINS
Bulletin No. Title Line No. AD
757-54-0027 Nacelles/Pylons - Pylon Attach Pins/Bolts 1-618 -
757-54-0036 Nacelles/Pylons - Nacelle Strut - Upper Link Replacement - Strut 
Improvement Program - Pratt and Whitney Powered Airplanes
1-732 2003-18-05
TABLE II - TERMINATED BULLETINS
Bulletin No. Title Line No. AD
757-54A0019 Nacelles/Pylons - Strut Attach Fuse Pins - Midspar Fuse Pin 
Inspection and/or Replacement - Pratt and Whitney Powered 
Airplanes
1-424 97-18-05
757-54-0026 
(a) 
Nacelles/Pylons - Strut - Mid-Spar Bushing, Strut Fitting Bushing, 
and Wing Fitting Bushing Replacement
1-665 -
757-54-0042 Nacelles/Pylons - Pratt and Whitney Powered Airplanes - Midspar 
Corrosion Inspection and Modification
1- 639 2006-07-21
(a) The changes to the midspar fittings is terminated by this bulletin because the parts are replaced. The 
changes to the wing fitting and strut upper link fitting are given in Table III, below.

### Page 17

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
Revision 1 - no more work was necessary on airplanes changed as shown in the initial release of this 
service bulletin. Revision 1 was sent to change a radius filler part number 311N3270-10 to part 
number 311N3270-9. Revision 1 also changed the sequence of some figures and the work given in 
them. Table V summarizes these changes which were intended to clarify, simplify, and improve the 
procedures that remove and replace the mid-spar fittings. The work given in Fig. 13 through 24 of the 
initial release of this service bulletin can now be found in Fig. 13 through 19 of revision 1. All 
subsequent figures are re-numbered accordingly.
TABLE III - RECOMMENDED
Bulletin No. Title Line No. AD
757-54-0026 (a) Nacelles/Pylons - Strut - Mid-Spar Bushing, Strut Fitting 
Bushing, And Wing Fitting Bushing Replacement
1-665 -
757-54-0037 Nacelles/Pylons - Strut - Side Skin Inspection and Modification 1-732 -
757-71A0085 Power Plant - Engine Mounts - Inspection for Gap Between the 
Forward Engine Mount and Strut Fitting and Forward Mount 
Bolt Replacement
- 2006-09-02
(a) The change to the midspar fittings is terminated by this bulletin because the parts are replaced. The 
changes to the wing fitting and strut upper link fitting are recommended before or during the strut 
improvement changes. 
TABLE IV - COMMON ACCESS
Bulletin No. Title Line No. AD
757-54-0006 Nacelles/Pylons - Engine to Wing Fairing - Aft Fairing Panel 
Inspection and Repair
37-496 -
757-54A0016 Nacelles/Pylons - General - Strut to Thrust Reverser Hinge 
Fitting - Replacement
37-197 -
757-54-0023 Nacelles/Pylons - Strut Fairings - Increase Clearance Between 
Strut Aft Fairing Lower Pan and Engine Exhaust Sleeve
37-447 -
757-54-0025 Nacelles/Pylons - Aft Engine Mount Installation - Inspection of 
Engine Mount Attach Bolts and Replacement of Barrel Nuts
37-442 -
757-57-0031 Wings - Skins - Lower Skin Panel Fasteners Inspection/
Installation
1-208 -
TABLE V - SUMMARY OF MAJOR FIGURE CHANGES IN REVISION 01
Work
given in 
Revision 01
Work given 
before in 
Revision 00
Description of Changes
Figure 13 Figure 13 Added instructions to remove the aft bulkhead fasteners. Added instructions to 
increase the mid-spar fitting fastener holes to a nominal diameter.
Figure 14 Figure 14
Figure 22
Added the instructions given in Figure 22 to transfer the mid-spar fitting holes to 
the upper drill plate. Clarified all hole transfer instructions. Added notes to 
highlight critical location and tool setup instructions. 
Figure 15 Figure 15 Corrected quantity errors in some instructions.

### Page 18

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
Revision 2 - No more work is necessary on airplanes changed as shown in previous issues of this 
service bulletin.
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directives 97-18-05 and 2003-18-05 are related 
to this service bulletin.
To keep a satisfactory damage tolerance rating, for the strut structure, until the airplane gets 37,500 
flight cycles or 20 calendar years, replace the upper link as shown in Service Bulletin 757-54-0036. 
Do the change at the time given in Service Bulletin 757-54-0036.
Figure 16 Figure 16
Figure 17
Combined and clarified all of the instructions to locate and shim the mid-spar 
fittings, side-link fittings, and splice plates. Put the instructions to assemble the 
parts and tools (before you drill and ream holes) into a separate figure. 
Figure 17 Figure 18
Figure 19
Figure 20
Figure 21
Combined and clarified all of the instructions to drill and ream holes in the 
vertical tangs of the mid-spar fitting fasteners. Combined and clarified all 
instructions to install the mid-spar fittings, side-link fittings, and splice plates on 
the aft bulkhead. 
Figure 18 Figure 23
Figure 24
Clarified all of the instructions to drill the fastener holes in the horizontal tangs of 
the mid-spar fitting.
Table 1: Compliance Time 
Condition Action
Compliance Time 
(Whichever Occurs Earlier)
All Airplanes Do the steps given in 
Work Instructions 
paragraph 3.B.3. Part 3, 
paragraph 3.B.4. Part 4 
and paragraph 3.B.5. 
Part 5. 
(a) (b) (c)
37,500 Total 
Flight Cycles
Whichever Occurs Later
20 Years from the 
date of issuance of 
the original 
Airworthiness 
Certificate
Whichever Occurs Earlier
8 Years from 
the date on 
Revision 2 of 
this Service 
Bulletin
Optional 
Threshold 
Formula
Optional Threshold Formula:
T = 37,500 - 1000(u-1.0)
where
T = Flight cycle threshold
u = Airplane utilization (hours per flight) *
* The airplane utilization (hours per flight), u, must be equal to or greater than one (1). This limit makes sure 
that the optional threshold formula does not give a flight cycle threshold that is more than the limit given in 
threshold a, which is 37,500 flight cycles.
(a) Complete the structural changes in this service bulletin to stop the inspection and replacement of the 
fuse pins given in Service Bulletin 757-54A0019. Federal Aviation Administration (FAA) Airworthiness 
Directive (AD) 97-18-05 is related to Service Bulletin 757-54A0019.
(b) Complete the structural changes in this service bulletin to stop the inspection of the bushings in the strut-
to-wing fittings given in Service Bulletin 757-54-0026 - the inspection of the bushings in the wing fitting 
continues.
(c) Complete the structural changes in this service bulletin to stop the inspection and modifications of the 
mid-spar fittings given in Service Bulletin 757-54-0042. Federal Aviation Administration (FAA) Airworthiness 
Directive (AD) 2006-07-21 is related to Service Bulletin 757-54-0042.

### Page 19

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
DAMAGE TOLERANCE BASED STRUCTURAL INSPECTIONS:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical 
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance 
Program.  No new Damage Tolerance Inspections (DTIs) are required by this Service Bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
This service bulletin has been approved by the FAA. In addition, the Manager of the Seattle Aircraft 
Certification Office approves the modification procedures with the corresponding compliance times 
specified in Table 1, under paragraph 1.E., "Compliance", of Service Bulletin 757-54-0034, Revision 
2, as an AMOC to the modification procedures and the inspection methods with the corresponding 
compliance times specified in paragraphs (f), (g), (h), (j), and (l) of AD 2006-07-21. All provisions of 
AD 2006-07-21 that are not specifically referenced in the preceding sentence remain fully applicable 
and must be complied with.
In addition, the Manager of the Seattle Aircraft Certification Office approves the modification 
procedures with the corresponding compliance times specified in Table 1, under paragraph 1.E., 
"Compliance", of Service Bulletin 757-54-0034, Revision 2, as an AMOC to the modification 
requirements in paragraphs (a), (b), and (d) of AD 2003-18-05. All provisions of AD 2003-18-05 that 
are not specifically referenced in the preceding sentence remain fully applicable and must be complied 
with.
In addition, the Manager of the Seattle Aircraft Certification Office approves the modification 
procedures with the corresponding compliance times specified in Table 1, under paragraph 1.E., 
"Compliance", of Service Bulletin 757-54-0034, Revision 2, as an AMOC to the inspection and 
modification procedures with the corresponding compliance times specified in paragraphs (a)(2)(ii), 
(b)(2)(ii), (c), (d), and (e) of AD 97-18-05. All provisions of AD 97-18-05 that are not specifically 
referenced in the preceding sentence remain fully applicable and must be complied with.
G. Manpower
The table below shows an estimate of the man-hours necessary to do this change for each airplane. 
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator 
man-hour data if necessary. The estimate does not include lost time. These are some examples of 
lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts

### Page 20

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— Time to find the tools.
Add more time if it is necessary to do the other service bulletins given in Paragraph I.D., Description.
H. Weight and Balance Changes
I. Electrical Load Data
Not changed
J. References
1. Existing Data:
a. Engineering Change Memo PRR54687 
b. Boeing Program Letter 6-1151-757/767PGM-120R3.
c. Service Related Problem (SRP) 757-SRP-54-0123.
d. 757 Maintenance Manual (AMM) Subject 28-11-00, 28-11-01, 28-11-07, 28-26-00, 
54-51-01
e. 757 Structural Repair Manual (SRM) Subject 51-40-09, 51-40-05, 51-41-09
f. 757 Nondestructive Test (NDT) Manual Part 6, Subject 51-00-17
g. Boeing Standard Wiring Practices Manual (BSWPM) (20-00-13, 20-10-11, 20-10-12)
h. Boeing Standard Overhaul Practices Manual (BSOPM) 20-10-03, 20-30-03, 20-50-03
i. Boeing Service Bulletin 757-54-0006, "Nacelles/Pylons - Engine to Wing Fairing - Aft Panel 
Inspection and Repair"
j. Boeing Service Bulletin 757-54-0016, "Nacelles/Pylons - General - Strut to Thrust Reverser 
Hinge Fitting Replacement"
Task Number of Persons Man-Hours Elapsed Time (Hours)
Access 5 160 32
Change Wing 4 388 97
Change Strut 4 412 103
Restore 5 300 60
Test 4 57 14.25
TOTAL FOR EACH AIRPLANE 1,317 306.25
Airplane Change in Weight 
(Pounds)
Change in Moment
 (Pound-Inches)   
Group 1 +44.7 +44,118.9
Group 2 +30.7 +30,300.9

### Page 21

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
k. Boeing Service Bulletin 757-54A0019, "Nacelles/Pylons - Strut Attach Fuse Pins - Midspar 
Fuse Pin Inspection and/or Replacement on Rolls Royce Powered Airplanes"
l. Boeing Service Bulletin 757-54-0023, "Nacelles/Pylons - Strut Fairings - Increase Clearance 
Between Strut Aft Fairing Lower Pan and Engine Exhaust Sleeve"
m. Boeing Service Bulletin 757-54-0025, "Nacelles/Pylons - Aft Engine Mount Installation - 
Inspection of Engine Mount Attach Bolt and Replacement of Barrel Nuts"
n. Boeing Service Bulletin 757- Mid-Spar Bushing, Strut Fitting Bushing, and Wing Fitting 
Bushing Replacement"
o. Boeing Service Bulletin 757-54-0027, "Nacelles/Pylons - Pylon Attach Pins/Bolts"
p. Boeing Service Bulletin 757-54-0036, "Nacelles/Pylons - Nacelle Strut - Upper Link 
Replacement - Strut Improvement Program - Pratt and Whitney Powered Airplanes" 
q. Boeing Service Bulletin 757-54-0037, "Nacelles/Pylons - Strut - Side Skin Inspection and 
Modification"
r. Boeing Service Bulletin 757-57-0031, "Wings - Skins - Lower Skin Panel Fasteners 
Inspection/Installation"
s. Boeing Service Bulletin 757-71A0085, "Power Plant - Engine Mounts - Inspection for Gap 
Between the Forward Engine Mount and Strut Fitting and Forward Mount Bolt Replacement"
t. FAA Airworthiness Directive (AD) 97-18-05, 2003-18-05, 2006-07-21, 2006-09-02.
2. Data supplied with this Service Bulletin:
None
3. Installation Drawings Used in the Preparation of this Service Bulletin:
Installation Drawings:
These drawings were used to prepare this service bulletin. These drawings are not necessary to 
make the specified changes, and are not supplied with this service bulletin. These drawings may 
not be applicable to all airplane configurations or operators.
Drawing No. Drawing Title
112N7001 Support Installation - Nacelle
208N1000 Production Illustration Major Index - Tubing
288N1000 Production Illustration Major Index - Electrical
310N3153 Drawing Tree - EBU and Strut Systems
311N3010 Seal Application - Nacelle Strut
311N3050 Strut Integration - PW2000 Engine
311N3080 Intermediate Seal - Strut to Wing - PW 2000 Engine
311N3150 Midspar Installation - Structural Strut - PW 2000 Engine
311N3270 Bulkhead installation - Aft, STA 203.2914, PW 2000 Engine

### Page 22

Original Issue: May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
K. Publications Affected
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability 
information.
Publication Chapter-Section
757 Maintenance Manual 54-00, 54-51, 54-52, 54-53, 54-54, 54-55
757 Structural Repair Manual 54-51, 57-20
757 Illustrated Parts Catalog 29-11, 54-51, 57-24
Component Maintenance Manual 54-50

### Page 23

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing supplies the kits, at no charge, shown in Paragraph 2.C., Parts Necessary For Each Airplane. 
See Boeing Program Letter 6-1151-757/767-120. Supply data can be given if requested.
NOTE: The Reorder Lead Time (ROLT) for the top kits shown in Paragraph 2.C is 43 weeks. ROLT
is calculated from the date Boeing gets the purchase order.
Send purchase orders and letters about the supply data to the Director of Spares and refer to this 
service bulletin number.
B. Industry Support Information
Boeing Industry Support information is provided in Program Letter 6-1151-757/767PGM-120R3 to be 
released 2nd quarter 2008. Additional copies of program letters are available from Boeing Product 
Assurance Contracts.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
NOTE: Refer to Appendix A for Existing Parts Accountability.
012N8042 TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-24 -23 -22 -21 -5 -1
Quantity Part Number Name
. ....-0 1 2 N 8 0 4 2 - 1 T o p  K i t ,  T o p  K i t  ( G r oup 1 Passenger)
. ...-.0 1 2 N 8 0 4 2 - 5 T o p  K i t ,  T o p  K i t  ( G r oup 2 Freighter)
. . . - 1 1 012N8042-21 Subkit, Kit, Wing (Left)
. . - . 1 1 012N8042-22 Subkit, Kit, Wing (Right)
. - . 1 . . 012N8042-23 Subkit, Kit, Left Side Link
- . 1 . . . 012N8042-24 Subkit, Kit, Right Side Link
. . 1 1 . . 012N8042-25 Subkit, Fastener Kit
. . . . 2 2 012N8042-3 Subkit, Kit, Strut Collector
. ....2 0 1 2 N 8 0 4 2 - 4 S u b k i t ,  W i n g - T o - S t r u t  K i t
. ...2 .0 1 2 N 8 0 4 2 - 6 S u b k i t ,  W i n g - T o - S t r u t  K i t
. 1 ....0 1 2 N 8 8 8 6 - 1 T e n s i o n  C l i p
1 .....0 1 2 N 8 8 8 6 - 2 T e n s i o n  C l i p
. 1 ....0 1 2 N 8 8 8 7 - 9 S i d e  L i n k  F i t t i n g
1 .....0 1 2 N 8 8 8 7 - 1 0 S i d e  L i n k  F i t t i n g

### Page 24

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
. 1 ....0 1 2 N 8 8 8 8 - 1 S u p p o r t  F i t t i n g  ( a )
1 .....0 1 2 N 8 8 8 8 - 2 S u p p o r t  F i t t i n g  ( b )
1 1 ....1 1 2 N 2 0 4 9 - 1 2 S h i m
1 1 ....B A C B 2 8 U 6 B 1 2 5 B u s h i n g
2 2 ....B A C B 3 0 N X 1 2 K 1 9 X B o l t ,  1 / 6 4  O v e r s i z e
4 4 ....B A C B 3 0 N X 1 2 K 2 0 X B o l t ,  1 / 6 4  O v e r s i z e
4 4 ....B A C B 3 0 N X 1 2 K 2 1 X B o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 N X 1 2 K 2 4 X B o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 N X 1 2 K 2 5 X B o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 N X 1 2 K 2 7 X B o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 N X 1 4 K 2 2 X B o l t ,  1 / 6 4  O v e r s i z e
2 2 ....B A C B 3 0 N X 1 4 K 2 5 X B o l t ,  1 / 6 4  O v e r s i z e
2 2 ....B A C B 3 0 N X 1 4 K 2 6 X B o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 U S 6 K 3 5 XB o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 U S 6 K 3 7 B o l t
1 1 ....B A C B 3 0 U S 7 K 2 5 XB o l t ,  1 / 6 4  O v e r s i z e
1 1 ....B A C B 3 0 U S 7 K 3 3 XB o l t ,  1 / 6 4  O v e r s i z e
2 2 ....B A C B 3 0 U S 7 K 3 4 XB o l t ,  1 / 6 4  O v e r s i z e
8 8 ....B A C C 3 0 B H 1 2 C o l l a r
7 7 ....B A C C 3 0 B H 1 4 C o l l a r
7 7 ....B A C C 3 0 X 1 4 C o l l a r
2 2 ....B A C C 3 0 X 1 4 C o l l a r
2 2 ....B A C N 1 0 H R 6 C D N u t
1 1 ....B A C N 1 0 H R 7 N u t
3 3 ....B A C N 1 0 H R 7 C D N u t
1 1 ....B A C S 4 0 R 0 1 5 B 0 2 1 F S h i m
2 2 ....B A C W 1 0 B P 6 C D W a s h e r
2 2 ....B A C W 1 0 B P 6 D P W a s h e r
2 2 ....B A C W 1 0 B P 6 1 C D W a s h e r ,  1 / 6 4  O v e r s i z e
2 2 ....B A C W 1 0 B P 6 1 D P W a s h e r ,  1 / 6 4  O v e r s i z e
3 3 ....B A C W 1 0 B P 7 1 A C W a s h e r ,  1 / 6 4  O v e r s i z e
1 1 ....B A C W 1 0 B P 7 1 C D W a s h e r ,  1 / 6 4  O v e r s i z e
4 4 ....B A C W 1 0 B P 7 1 D P W a s h e r ,  1 / 6 4  O v e r s i z e
(a) Optional 012N-8888-3.
(b) Optional 012N-8888-4.
012N8042 TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-24 -23 -22 -21 -5 -1
Quantity Part Number Name

### Page 25

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
- 4 1- 4 - 3 5- 3 3- 3 - 2 5
Quantity Part Number Name
.....-0 1 2 N 8 0 4 2 - 2 5 S u b k i t ,  F a s t e n e r  K i t
....-.0 1 2 N 8 0 4 2 - 3 S u b k i t ,  K i t ,  S t r u t  C o l l e c t o r
...-1 .0 1 2 N 8 0 4 2 - 3 3 S u b k i t ,  F a i r i n g  K i t
. . - . 1 . 012N8042-35 Subkit, Midspar Fitting Kit
.-....0 1 2 N 8 0 4 2 - 4 S u b k i t ,  W i n g - T o - S t r u t  K i t
-1 ....0 1 2 N 8 0 4 2 - 4 1 S u b k i t ,  K i t ,  S i d e  L i n k
.1 ....0 1 2 N 8 0 4 2 - 4 2 S u b k i t ,  K i t ,  M i d s p a r  P i n
.1 ....0 1 2 N 8 0 4 2 - 4 3 S u b k i t ,  K i t ,  D i a g o n a l
.1 ....0 1 2 N 8 0 4 2 - 4 6 S u b k i t ,  K i t ,  F a s t e n e r
..1 ...0 1 2 N 8 0 4 2 - 3 7 F i t t i n g  A s s e m b l y
..1 ...0 1 2 N 8 0 4 2 - 3 8 F i t t i n g  A s s e m b l y
...1 ..0 1 2 N 8 0 4 2 - 6 5 D o u b l e r
...1 ..0 1 2 N 8 0 4 2 - 5 5 A n g l e
...1 ..0 1 2 N 8 0 4 2 - 5 7 F i l l e r
...1 ..0 1 2 N 8 0 4 2 - 5 9 S h i m
.....2 1 1 2 N 7 038-5 Radius Filler
.....2 1 1 2 N 7 038-6 Radius Filler
.....2 1 1 2 N 7 038-7 Radius Filler
.....2 1 1 2 N 7 038-8 Radius Filler
..1 ...3 1 1 N 3 180-12 Shim
..2 ...3 1 1 N 3 270-2 Shim
..2 ...3 1 1 N 3 270-3 Shim
..2 ...3 1 1 N 3 270-4 Shim
..2 ...3 1 1 N 3 270-5 Shim
..2 ...3 1 1 N 3 270-6 Shim
..6 ...3 1 1 N 3 270-9 Radius Filler
..1 ...3 1 1 N 3 277-13 Fitting Assy
..1 ...3 1 1 N 3 277-14 Fitting Assy
4 .....3 1 1 N 5 000-1 Retainer
4 .....3 1 1 N 5 004-2 Bushing
2 .....3 1 1 N 5 017-1 Washer
2 .....3 1 1 N 5 066-8 Retainer
4 .....3 1 1 N 5 238-2 Link Assy
2 .....3 1 1 N 5 503-1 Fuse Pin
4 .....B A C B 2 8 A K 1 0 - 0 8 5B u s h i n g  ( a )
..4 ...B A C B 3 0 F P 1 6 A 1 0 B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 F P 1 6 A 1 4 B o l t ,  1 / 6 4  O v e r s i z e

### Page 26

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
..4 ...B A C B 3 0 F P 1 6 A 7 B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 F P 1 6 A 9 B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 F P 6 A 3 B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 F Q 8 A 5 U B o l t ,  1 / 6 4  O v e r s i z e
..1 ...B A C B 3 0 K F 8 A 5 U B o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 K K 1 6 A 1 0 B o l t ,  1 / 3 2  O v e r s i z e
..4 ...B A C B 3 0 K K 1 6 A 1 4 B o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 K K 1 6 A 7 B o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 K K 1 6 A 9 B o l t ,  1 / 3 2  O v e r s i z e
..1 ...B A C B 3 0 K K 6 A 3 B o l t ,  1 / 3 2  O v e r s i z e
..1 2 ...B A C B 3 0 L E 4 K 2 1 X B o l t ,  1 / 6 4  O v e r s i z e
..3 ...B A C B 3 0 L E 4 K 2 1 Y B o l t ,  1 / 3 2  O v e r s i z e
4 .....B A C B 3 0 L J 4 U 1 1 B o l t
..4 ...B A C B 3 0 M C 1 2 A 1 0 U B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 M C 1 2 A 6 U B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 M C 1 4 A 1 0B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 M C 1 4 A 1 0 U B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 M C 1 4 A 1 1B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 M C 1 6 A 2 6B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 M D 1 2 A 1 0 U B o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 M D 1 2 A 6 U B o l t ,  1 / 3 2  O v e r s i z e
..1 ...B A C B 3 0 M D 1 4 A 1 0B o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 M D 1 4 A 1 0 U B o l t ,  1 / 3 2  O v e r s i z e
..1 ...B A C B 3 0 M D 1 4 A 1 1B o l t ,  1 / 3 2  O v e r s i z e
..4 ...B A C B 3 0 M D 1 6 A 2 6B o l t ,  1 / 3 2  O v e r s i z e
..3 1 1 ..B A C B 3 0 M Y 6 K 3 X B o l t ,  1 / 6 4  O v e r s i z e
. . 1 1 . . BACB30MY6K3Y Bolt, 1/32 Oversize
..6 ...B A C B 3 0 M Y 6 K 4 X B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 M Y 6 K 4 Y B o l t ,  1 / 3 2  O v e r s i z e
..3 ...B A C B 3 0 M Y 6 K 5 B o l t
..8 ...B A C B 3 0 M Y 6 K 5 X B o l t ,  1 / 6 4  O v e r s i z e
..3 ...B A C B 3 0 M Y 6 K 5 Y B o l t ,  1 / 3 2  O v e r s i z e
..1 2 ...B A C B 3 0 M Y 6 K 6 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 M Y 6 K 6 Y B o l t ,  1 / 3 2  O v e r s i z e
..1 ...B A C B 3 0 M Y 8 K 1 0 XB o l t ,  1 / 6 4  O v e r s i z e
..1 ...B A C B 3 0 M Y 8 K 1 0 YB o l t ,  1 / 3 2  O v e r s i z e
..3 ...B A C B 3 0 M Y 8 K 1 2 XB o l t ,  1 / 6 4  O v e r s i z e
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-41 -4 -35 -33 -3 -25
Quantity Part Number Name

### Page 27

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
..2 ...B A C B 3 0 M Y 8 K 1 2 YB o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 M Y 8 K 5 X B o l t ,  1 / 6 4  O v e r s i z e
..1 ...B A C B 3 0 M Y 8 K 5 Y B o l t ,  1 / 3 2  O v e r s i z e
..6 ...B A C B 3 0 M Y 8 K 7 X B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 M Y 8 K 7 Y B o l t ,  1 / 3 2  O v e r s i z e
..3 ...B A C B 3 0 M Y 8 K 8 X B o l t ,  1 / 6 4  O v e r s i z e
..1 ...B A C B 3 0 M Y 8 K 8 Y B o l t ,  1 / 3 2  O v e r s i z e
. . 2 4 . . BACB30NW6K3X Bolt, 1/64 Oversize
. . 1 1 . . BACB30NW6K3Y Bolt, 1/32 Oversize
..2 ...B A C B 3 0 N W 6 K 6 X B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 N W 6 K 7 X B o l t ,  1 / 6 4  O v e r s i z e
..1 ...B A C B 3 0 N W 6 K 7 Y B o l t ,  1 / 3 2  O v e r s i z e
.....1 B A C B 3 0 N X 1 0 K 2 2 X B o l t ,  1 / 6 4  O v e r s i z e
.....3 B A C B 3 0 N X 1 0 K 2 3 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N X 1 6 K 1 5 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N X 1 6 K 1 5 Y B o l t ,  1 / 3 2  O v e r s i z e
..4 ...B A C B 3 0 N X 1 6 K 2 1 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N X 1 6 K 2 1 Y B o l t ,  1 / 3 2  O v e r s i z e
..4 ...B A C B 3 0 N X 1 6 K 2 2 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N X 1 6 K 2 2 Y B o l t ,  1 / 3 2  O v e r s i z e
.....4 B A C B 3 0 N X 8 K 2 2 XB o l t ,  1 / 6 4  O v e r s i z e
.....2 B A C B 3 0 N X 8 K 2 4 XB o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N Y 8 K 1 0 XB o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 N Y 8 K 1 0 YB o l t ,  1 / 3 2  O v e r s i z e
..3 7 ...B A C B 3 0 N Y 8 K 6 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N Y 8 K 6 Y B o l t ,  1 / 3 2  O v e r s i z e
..2 6 ...B A C B 3 0 N Y 8 K 7 X B o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 N Y 8 K 7 Y B o l t ,  1 / 3 2  O v e r s i z e
..6 ...B A C B 3 0 N Y 8 K 9 X B o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 N Y 8 K 9 Y B o l t ,  1 / 3 2  O v e r s i z e
.....1 B A C B 3 0 U S 1 0 K 3 7 B o l t
.....4 B A C B 3 0 U S 1 0 K 3 8 B o l t
.....2 B A C B 3 0 U S 1 0 K 4 0 B o l t
2 .....B A C B 3 0 U S 1 0 K 4 0 D B o l t
.....2 B A C B 3 0 U S 1 0 K 4 3 B o l t
..4 ...B A C B 3 0 U S 8 K 2 8 XB o l t ,  1 / 6 4  O v e r s i z e
..4 ...B A C B 3 0 U S 8 K 2 8 YB o l t ,  1 / 3 2  O v e r s i z e
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
- 4 1- 4 - 3 5- 3 3- 3 - 2 5
Quantity Part Number Name

### Page 28

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
..2 ...B A C B 3 0 U S 8 K 3 0 XB o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 U S 8 K 3 0 YB o l t ,  1 / 3 2  O v e r s i z e
..2 ...B A C B 3 0 U S 8 K 3 1 XB o l t ,  1 / 6 4  O v e r s i z e
..2 ...B A C B 3 0 U S 8 K 3 1 YB o l t ,  1 / 3 2  O v e r s i z e
..6 ...B A C B 3 0 U S 9 K 3 1 XB o l t ,  1 / 6 4  O v e r s i z e
..6 ...B A C B 3 0 U S 9 K 3 1 YB o l t ,  1 / 3 2  O v e r s i z e
..6 ...B A C B 3 0 U S 9 K 3 2 XB o l t ,  1 / 6 4  O v e r s i z e
.....1 B A C B 3 0 Y K 1 0 K 1 2 B o l t  
.....1 B A C B 3 0 Y K 1 0 K 1 3 B o l t  
.....4 B A C B 3 0 Y K 1 0 K 1 4 B o l t  ( b )
.....2 B A C B 3 0 Y K 1 0 K 1 5 B o l t  
.....8 B A C B 3 0 Y K 1 0 K 1 6 B o l t  ( b )
.....2 B A C B 3 0 Y K 1 0 K 1 6 X B o l t ,  1 / 6 4  O v e r s i z e  ( c )
.....3 B A C B 3 0 Y K 1 0 K 1 7 B o l t  ( b )
.....9 B A C B 3 0 Y K 1 0 K 1 8 B o l t  ( b )
.....3 B A C B 3 0 Y K 1 0 K 1 8 X B o l t ,  1 / 6 4  O v e r s i z e  ( c )
.....1 B A C B 3 0 Y K 1 0 K 1 9 B o l t  ( b )
.....2 B A C B 3 0 Y K 1 0 K 2 0 B o l t  ( b )
.....1 B A C B 3 0 Y K 1 0 K 2 0 X B o l t ,  1 / 6 4  O v e r s i z e  ( c )
.....1 2 B A C B 3 0 Y K 1 0 K 2 1 B o l t  ( b )
.....7 B A C B 3 0 Y K 1 0 K 2 2 B o l t  ( b )
.....4 B A C B 3 0 Y K 1 0 K 2 2 X B o l t ,  1 / 6 4  O v e r s i z e  ( c )
.....2 B A C B 3 0 Y K 1 0 K 2 3 B o l t  ( b )
.....2 B A C B 3 0 Y K 1 0 K 2 4 B o l t  ( b )
.....2 B A C B 3 0 Y K 1 0 K 2 5 B o l t  ( b )
.....1 B A C B 3 0 Y K 1 0 K 2 5 X B o l t ,  1 / 6 4  O v e r s i z e
.....4 B A C B 3 0 Y K 1 0 K 2 6 B o l t  ( b )
.....2 B A C B 3 0 Y K 1 0 K 2 7 B o l t  
.....1 B A C B 3 0 Y K 1 2 K 1 6 B o l t  ( d )
.....4 B A C B 3 0 Y K 1 2 K 1 7 B o l t  ( d )
.....6 B A C B 3 0 Y K 1 2 K 1 8 B o l t  ( d )
.....3 B A C B 3 0 Y K 1 2 K 1 9 B o l t  ( d )
.....1 B A C B 3 0 Y K 1 2 K 2 0 B o l t  ( d )
.....2 B A C B 3 0 Y K 1 2 K 2 3 B o l t  ( d )
.....2 B A C B 3 0 Y K 1 2 K 2 4 B o l t  
.....2 3 B A C C 3 0 C P 1 0 C C o l l a r
.....9 B A C C 3 0 C P 1 2 C C o l l a r
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-41 -4 -35 -33 -3 -25
Quantity Part Number Name

### Page 29

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
..4 ...B A C C 3 0 A B 6 C Y C o l l a r
..2 ...B A C C 3 0 A B 8 S Y C o l l a r
..2 ...B A C C 3 0 A C 1 4 C o l l a r ,  1 / 3 2  O v e r s i z e
..1 7 ...B A C C 3 0 A C 1 6 C o l l a r ,  1 / 3 2  O v e r s i z e
..8 ...B A C C 3 0 A C 8 C o l l a r ,  1 / 3 2  O v e r s i z e
..1 7 ...B A C C 3 0 A G 1 6 C o l l a r
..3 0 1 5 ..B A C C 3 0 M 6 C o l l a r
..1 7 ...B A C C 3 0 M 8 C o l l a r
. . 13 2 . . BACC30R6 Collar, 1/32 Oversize
..8 ...B A C C 3 0 R 8 C o l l a r ,  1 / 3 2  O v e r s i z e
.....4 B A C C 3 0 X 1 0 C o l l a r
.....5 B A C C 3 0 X 1 2 C o l l a r
..9 ...B A C C 3 0 X 1 2 S C o l l a r
..4 ...B A C C 3 0 X 1 4 C o l l a r
..4 ...B A C C 3 0 X 1 4 S C o l l a r
..1 7 ...B A C C 3 0 X 1 6 C o l l a r
..4 8 ..6 B A C C 3 0 X 8 C o l l a r
..2 4 ...B A C C 3 0 X 8 S C o l l a r
.....4 B A C N 1 0 H R 1 0 N u t
..1 5 ...B A C N 1 0 H R 4 C S N u t
..8 ...B A C N 1 0 H R 8 C D N u t
..4 ...B A C N 1 0 H R 8 C S N u t
..1 2 ...B A C N 1 0 H R 9 C D N u t
4 .....B A C N 1 0 J C 4 C M N u t
..8 ...B A C N 1 0 Y T 4 C D N u t
2 .....B A C N 1 1 N 1 0 C S N u t
2 .....B A C N 1 1 N 7 C S N u t  -  S e l f  L o c k i n g
2 .....B A C P 1 8 B C 0 3 A 1 0 P C o t t e r  P i n  ( e )
2 .....B A C P 1 8 B C 0 4 A 1 2 P C o t t e r  P i n  ( f )
...3 ..B A C R 1 5 B A 6 A D 3 R i v e t
..3 ...B A C R 1 5 B B 6 D 4 R i v e t
..3 ...B A C R 1 5 C E 6 K E 2 R i v e t
..5 ...B A C R 1 5 C E 6 K E 4 R i v e t
..2 ...B A C R 1 5 C E 6 K E 5 R i v e t
..3 ...B A C R 1 5 F T 6 K E 3 CR i v e t
..2 ...B A C S 4 0 R 0 1 6 B 0 3 0 F S h i m
..4 ...B A C S 4 0 R 0 1 8 E 0 3 4 F S h i m
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
- 4 1- 4 - 3 5- 3 3- 3 - 2 5
Quantity Part Number Name

### Page 30

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
..2 ...B A C S 4 0 R 0 2 5 W 0 4 3 S h i m
..1 ...B A C S 4 0 R 0 2 8 U 0 2 9 S h i m
..2 ...B A C S 4 0 R 0 3 5 U 0 9 5 S h i m
..2 ...B A C S 4 0 R 0 3 5 W 0 9 5 S h i m
..4 ...B A C W 1 0 B N 8 1 C W a s h e r ,  1 / 6 4  O v e r s i z e
..4 ...B A C W 1 0 B N 8 2 C W a s h e r ,  1 / 3 2  O v e r s i z e
..6 ...B A C W 1 0 B N 9 1 C W a s h e r ,  1 / 6 4  O v e r s i z e
..6 ...B A C W 1 0 B N 9 2 C W a s h e r ,  1 / 3 2  O v e r s i z e
6 .....B A C W 1 0 B P 1 0 A C U W a s h e r
1 2 .....B A C W 1 0 B P 1 0 A P U W a s h e r
.....4 B A C W 1 0 B P 1 0 C D W a s h e r
.....8 B A C W 1 0 B P 1 0 D P W a s h e r
4 .....B A C W 1 0 B P 1 2 A P U W a s h e r
4 .....B A C W 1 0 B P 4 A P U W a s h e r
..1 2 ...B A C W 1 0 B P 4 1 A P U W a s h e r ,  1 / 6 4  O v e r s i z e
..1 2 ...B A C W 1 0 B P 4 1 C D W a s h e r ,  1 / 6 4  O v e r s i z e
..3 ...B A C W 1 0 B P 4 2 A P U W a s h e r ,  1 / 3 2  O v e r s i z e
..3 ...B A C W 1 0 B P 4 2 C D W a s h e r ,  1 / 3 2  O v e r s i z e
..2 ...B A C W 1 0 B P 4 2 D P W a s h e r ,  1 / 3 2  O v e r s i z e
..4 ...B A C W 1 0 B P 4 2 N D P W a s h e r ,  1 / 3 2  O v e r s i z e
.....4 8 B A C W 1 0 B P 5 D P W a s h e r
.....1 1 B A C W 1 0 B P 5 1 D P W a s h e r ,  1 / 6 4  O v e r s i z e
.....1 5 B A C W 1 0 B P 6 D P W a s h e r
1 2 .....B A C W 1 0 B P 7 A P U W a s h e r
..4 ...B A C W 1 0 B P 8 1 C W a s h e r ,  1 / 6 4  O v e r s i z e
..4 ...B A C W 1 0 B P 8 1 P W a s h e r ,  1 / 6 4  O v e r s i z e
..4 ...B A C W 1 0 B P 8 2 C W a s h e r ,  1 / 3 2  O v e r s i z e
..4 ...B A C W 1 0 B P 8 2 P W a s h e r ,  1 / 3 2  O v e r s i z e
..4 ...H L 1 3 9 3 D U 1 2 C o l l a r ,  1 / 3 2  O v e r s i z e
..2 ...H L 1 3 9 3 D U 1 4 C o l l a r ,  1 / 3 2  O v e r s i z e
..1 0 ...H L 3 8 2 - 1 6 A P B W C o l l a r ,  1 / 3 2  O v e r s i z e
.....2 1 H L 7 5 - 1 0 A P B W C o l l a r
.....1 0 H L 7 5 - 1 2 A P B W C o l l a r
..2 ...N A S 1 8 0 5 - 4 N u t
...1 ..3 1 1 N 3 1 5 0 U 4 9 D o u b l e r
...1 ..3 1 1 N 3 1 5 0 U 5 0 D o u b l e r
..1 ...3 1 1 N 3 1 5 7 U 2 C l o s eout Angle
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-41 -4 -35 -33 -3 -25
Quantity Part Number Name

### Page 31

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
(a) Optional BACB28AK10-086.
(b) Optional HLT422AP10-( ).
(c) Optional HLT622AP10-( ).
(d) Optional HLT422AP12-( ).
(e) Optional BACP18BC03C10P.
(f) Optional BACP18BC04C12P.
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-6 -46 -43 -42
Quantity Part Number Name
1 . . . 012N8042-41 Subkit, Kit, Side Link
1 . . - 012N8042-42 Subkit, Kit, Midspar Pin
. . - . 012N8042-43 Subkit, Kit, Diagonal
1 - . . 012N8042-46 Subkit, Kit, Fastener
- . . . 012N8042-6 Subkit, Wing-To-Strut Kit
. . 1 . 311N3730-22 Diagonal Brace Assy
. . 2 . 311N3730-25 Bushing
. . 2 . 311N3730-27 Bushing
. . . 2 311N5066-3 Washer
. . . 2 311N5217-2 Fuse Pin
. . 7 . BACB19F10S Block
. 2 . . BACB30FQ10A10 Bolt, 1/64 Oversize
. 1 . . BACB30KF10A10 Bolt, 1/32 Oversize
. 2 . . BACB30MC10A10U Bolt, 1/64 Oversize
. 1 . . BACB30MD10A10U Bolt, 1/32 Oversize
. . 7 . BACB30NM3K5 Bolt
. . 4 . BACC10FY038SE Clamp
. . 7 . BACC15AN10 Clip
. 2 . . BACC30AB10CY Collar
.2 ..B A C C 3 0 X 1 0 S C o l l a r
. . 7 . BACN10JC3 Nut
. . . 2 BACN11N118CS Nut
. . 1 . BACN11N8CS Nut
. . 1 . BACP18BC03A10P Cotter Pin (a)
. . 1 . BACP18BC03C10P Cotter Pin
. . . 2 BACP18BC04A16P Cotter Pin (b)
. . . 2 BACP18BC04C16P Cotter Pin
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
- 4 1- 4 - 3 5- 3 3- 3 - 2 5
Quantity Part Number Name

### Page 32

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
. . . 6 BACW10BP18APU Washer
..1 .B A C W 1 0 B P 8 A C U W a s h e r
..3 .B A C W 1 0 B P 8 A P U W a s h e r
. 1 . . HL1393DU10 Collar, 1/32 Oversize
..1 .N A S 6 7 0 8 D U 8 1 B o l t
(a) Optional BACP18BC03C10P.
(b) Optional BACP18BC04C16P.
012N8042 -TOP KIT - 757 STRUT IMPROVEMENT PROGRAM - PRATT AND WHITNEY
-6 -46 -43 -42
Quantity Part Number Name

### Page 33

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
2. Parts and Materials Supplied by the Operator:
Wing
Quantity Part Number (Specification) Name
As necessary BMS 10-11, Type I Primer
As necessary BMS 10-20, Type II Primer
As necessary BMS 5-26, Type II Sealant
As necessary BMS 5-95 Sealant
As necessary Chemical Film Treatment Alodine 600 (or equivalent)
As necessary (a) Plug 
1 - (b) Back Spotfacer.  0.6250 dia.   with 
0.0625 radius and 0.250 pilot dia.
1 - (b) Back Spotfacer.   0.8750 dia.  with 
0.09 radius and 0.250 dia. pilot arbor
1 - (b) Back Spotfacer.  1.00 dia. with 0.09 
radius and 0.250 dia. pilot arbor
2 - (b) Pilot arbor.  6.0 long and 0.250 dia.
1 -  Abrasive Cut-off Wheel.  1.25 dia.
(a) Al-Ni-Br or 7075-T6 Aluminum, 0.74 inch long, 0.375 inner diameter, and a 0.0017 to 
0.0020 interference with the existing hole found in Figure 13.
(b) See spotface and shot peen specifications in Figures 11 and 12.
Strut
Quantity Part Number (Specification) Name
As necessary Alodine
As necessary Dry Ice
As necessary BMS 10-11, Type I Primer
As necessary BMS 10-79, Type III Primer
As necessary BMS 5-63, Type II Sealant
As necessary BMS 8-133 Rigid Foam
As necessary DAPCO 1-100 Primer
As necessary Dow Corning DC93-006 (a) Sealant
As necessary Dow Corning DC3110 (a) Leveling Compound
As necessary Dow Corning DC1200 (a) Primer
As necessary RTV 174 (b) Adhesive
As necessary Dental Plaster Kerr Vel-Mix Die Stone
As necessary Modeling Clay, non-hardening
(a)  Dow Corning (V71984)
      3901 S. Saginaw Road
      Midland, Michigan 48641-2721

### Page 34

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
3. Parts Modified and Reidentified:
None.
(b)  Optional: RTV 102 General Electric Company
RTV 108 - Silicone Products Business Dept. 
(V01139)
RTV 157 Hudson River Road
IS-802 Waterford, New York 12188
CRTV9405
or
DC Q3-7063 Dow Corning (V71984)
3901 S. Saginaw Road
Midland, Michigan 48641-2721
Wing-to Strut
Quantity Part Number (Specification) Name
As necessary Liquid Nitrogen
As necessary BMS 5-95 Sealant
As necessary MIL-G-23827 or MIL-G-21164 Grease
As necessary (a) Teflon Tape
(a) Optional: 2045-5
2245-5
HM650
or
TV
or
P-421
P-422
Fluorglas - A unit of Allied-Signal Inc 
(V07512)
McCaffrey Street Post Office Box 320
Hoosick Falls, New York 12090-0320
CHR Industries Inc - An ARMO Co 
(V71643)
407 East Street
New Haven, Connecticut 06509
Permacel Division
- Johnson and Johnson (V99742) 
US Highway No 1, Post Office Box 671
New Brunswick, New Jersey 08903
Strut Stand and Wing Pad
The items shown below are used in Figures 2, 5, and 6 to make the strut workstand 
and wing pad. The quantities and specifications are shown in those figures.
Name Name Name Name
Wood Screws Carriage Bolts Rubber Sheet
Plywood Nuts Threaded Rod Contact Cement
Wood Nails Washers Barrel Nuts
Wood Adhesive Attach Bolts Aluminum Plate

### Page 35

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 35 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
4. Parts Removed and Not Replaced:
Refer to Appendix A for Existing Parts Accountability.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
The 757 Structural Repair Manual Subject 51-40-09 gives data about cold working tools and sleeves 
necessary to do the work given in this service bulletin. These tools are available from industry sources.
Engineering, service, and a kit of cold working tools made for this change are available from Fatigue 
Technology, Inc. or West Coast Industries, Inc.
—R e f e r  T o :
FTI Kit Number: FTI-757-54-0034-1
Fatigue Technology, Inc.
P.O. Box C-88388
Seattle, WA  98188  USA
Phone Number (206) 246-2010
Fax (206) 244-9886
—R e f e r  T o :
WCI Kit Number:  WCI-757-54-0034 
West Coast Industries, Inc.
14900 Whitman Avenue North
Seattle, WA  98133-6532  USA
Phone Number (206) 365-7513
Fax (206) 365-7483
Boeing can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this Service 
Bulletin. Send a Purchase Order to the Director of Spares. Give this service bulletin number and the 
date the tools will be used. If there is a limit in the quantity of available rental tools, a supply sequence 
is given by Spares.
The kits are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgement. After the Price date, new price data is applicable. Prices are in United States 
dollars. Terms: Net 30 days.
Reference this service bulletin number and submit purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
Rental Data:
Tool Kit Number Name Price (a)
012N8042-100 Top Kit - Tool kits for the Strut 
Improvement Program - Pratt 
and Whitney
No charge
(a) Refer to Program Letter 6-1151-757/767PGM-120R3.

### Page 36

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 36 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
(Service Bulletin 757-54-0034)
The kits are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgment. After the Price date, new price data is applicable. Prices are in United States 
dollars. Terms: Net 30 days.
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability. 
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be 
necessary. Examine operator tool supply to make sure all necessary tools are available.
Tool Kit Number Name
MIT012N8042-100 Top Kit, Tool Kit for Strut Improvement Program - Pratt and Whitney (a)
MIT012N8042-1A Midspar Fitting Installation Tool Kit (b) (c) (d)
MIT012N8042-1B Diagonal Brace Locating Tool - Passenger
MIT012N8042-1E Left Wing Side Link Fitting Installation Tool Kit (e)
MIT012N8042-1F Left Wing Back-Up Fitting Installation Tool Kit (e)
MIT012N8042-1J Diagonal Brace Boring Tool Kit - Passenger
MIT012N8042-1K Right Wing Side Link Fitting Installation Tool Kit (e)
MIT012N8042-1L Side Link Locating Tool
MIT012N8042-1M Right Wing Back-Up Fitting Installation Tool Kit (e)
MIT012N8042-1N Side Link Assembly Tool
MIT012N8042-1Q Drill Motor Tool Kit
(a) Tool Kit MIT012N8042-100 includes 1 each of Tool Kits MIT012N8042-1A thru 
MIT012N8042-1Q.
(b) Tool Kit MIT012N8042-1A contains all of the tools necessary to change two struts at the same 
time. The tools in this kit are kept in four boxes which are identified as Parts 1 thru 4. The Part 1 
and 2 boxes contain the odd-numbered tools necessary to change one strut. The Part 3 and 4 
boxes contain the even-numbered tools necessary to change the other strut. 
NOTE: Since the struts are structurally interchangable from side-to-side, there are no unique tools 
for the left or right struts.
NOTE: To make it easy to examine the contents of the Part 1 thru 4 boxes, identical parts are 
identified with unique part numbers. For example, the Part 2 and 4 boxes contain fifty-six (56) 
identical alignment pins (Detail 343) that are identified as Parts 183 thru 238. The twenty-eight (28) 
odd-numbered pins are kept in the Part 2 box. The twenty-eight (28) even-numbered pins are kept 
in the Part 4 box. Since the tools in one of the two boxes can be used to change one of the two 
struts, the service bulletin instructions tell the operator to use Parts 183 thru 238.

### Page 37

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 37 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
Cold working tools are necessary to do the change given in this service bulletin. To get the cold 
working tools, refer to Paragraph 2.E, Special Tooling - Price and Availability.
(c) Tool Kit MIT012N8042-1A contains drills and reamers that were provided by United Drill 
Bushing. If these items need to be replaced, contact United Drill Bushing Corp at (213) 803-1521 
or 12200 Woodruff Ave., Downey, California, 90241-0250.
(d) Tool Kit MIT012N8042-1A contains a potting compound called Tool Stone. If this material needs 
to be replaced, you can purchase it through Boeing at Boeing Store, MSA 500, Auburn, 
Washington, Code No. J6-4207-5000.
(e) The part numbers of the components in this tool kit are the same as those in the tool kit for the 
opposite wing. For example, MIT012N8042-1E contains a -1 assembly which is identified as Part 
2. This part is used to change the side link attach fitting on the left wing. Similarly, MIT012N8042-
1K also contains a -1 assembly which is identified as Part 2. This part is used to change the side 
link attach fitting on the right wing. As a result, the service bulletin instructions tell the operator to 
use Part 2 to change the side link attach fitting, regardless of whether it is on the left or right wing.
Tool Kit Number Name

### Page 38

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
BLANK PAGE

### Page 39

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 39 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for 
definition of the acronyms.
2. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or 
minus 0.03 inch.
— Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
— Angular tolerance is plus or minus 2 degrees
— Hole dimensions for standard solid rivets are given in 757 SRM, Chapter 51
— Torque limits to tighten nuts and bolts are given in 757 SRM, Chapter 51.
3. For approved fastener and process material substitutions, refer to 757 SRM, Chapter 
51, Alternate fasteners are given in 757 SRM Chapter 51 and Boeing Drawing 
65-88700.
4. Refer to the Boeing Standard Wiring Practices Manuals 20-10-11 and 20-10-12 for the 
wire installation procedures.
5. Obey all of the warnings and cautions given in the specified manual sections.
6. The operator can use tools of their own design as alternatives to the Boeing supplied 
tools to do the accomplishment instructions in this service bulletin.
7. Operators can do the structural changes given in this service bulletin during two 
maintenance periods. During each maintenance period the structural changes must be 
fully completed on one wing/strut installation. Do not put the airplane back into service 
unless the structural changes are fully complete on a left or right wing/strut installation. 
Example: You can do all of the structural changes on the left wing and left strut during 
the first maintenance period; then do all of the structural changes on the right wing and 
right strut during the second maintenance period. Both maintenance periods must agree 
with the threshold criteria given in Paragraph 1.E. Compliance.
B. WORK INSTRUCTIONS
1. PART I - GENERAL INFORMATION
a. See Figure 1 for an overview of the nacelle strut and wing structure modification.
2. PART II - STRUT REMOVAL

### Page 40

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 40 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
a. Make a Strut Stand. Figure 2 shows an example.
b. Do the strut removal procedures as shown in AMM 54-51-01/400, stop before removal of 
the side links.
c. Remove the specified fasteners from the Lower Spar Fittings as shown in Figure 3.
NOTE: This is necessary at this time only if the design of the strut stand will block access
to these fasteners.
d. Continue the strut removal procedures as shown in AMM 54-51-01/400.
e. During the removal of the struts, keep or discard the components shown in Figure 4. 
f. Install the strut on to the strut stand, as shown in Figure 5. 
3. PART III - WING STRUCTURE CHANGES
a. Defuel, drain, and purge the main fuel tanks as given in the AMM 28-26-00 and AMM 
28-11-00
b. Remove access panels 541BB/641BB for the inner bay, 541CB/641CB for the main bay and 
641DB/ 641DB for the outer bay as shown in AMM 28-11-01. 
c. Open dry bay access panels 532FZ/632FZ for the inner bay and 532HZ/632HZ for the main 
bay as shown in AMM 28-11-07.
CAUTION: PLACE PAD OVER DRY BAY BULKHEAD TO PROTECT IT FROM DAMAGE.
d. Make a pad to protect the dry bay bulkhead. Figure 6 shows an example. 
e. Remove and keep the support brackets and the fasteners for the hydraulic equipment, from 
the side load fittings, as necessary.
f. Inspect and machine the middle gusset on the inboard side load fitting as shown in Figure 7.
g. Remove and replace six fasteners in the inboard side load fitting (ISLF) as shown in Figure 
8. 
— PANEL 1: Overview of the fastener removal and replacement in the side load fittings.
— PANEL 2: Remove and keep the support assembly.
— PANEL 3: Remove twenty-six fasteners from the inboard side load fitting (ISLF). 
Inspect the holes for signs of damage. For holes where no damage is found - install the 
standard size fastener. For holes where damage is found - increase the diameter of the 
hole, then install oversize fasteners. If the specified increase in the diameter does not 
remove the damage, write to Boeing for instructions. Install the fastener wet with 
sealant and put sealant fully around the collars and nuts after installation.
— PANEL 4: Remove eight fasteners from the OSLF, coldwork the holes and ream to the 
specified diameter. Install oversize fasteners. Remove eight fasteners from the ISLF 
and inspect the holes for signs of damage. For holes where no damage is found, install 
the standard size fastener. For holes where damage is found - increase the diameter 
of the hole and install oversize fasteners. If the specified increase in the diameter does 
not remove the damage, write to Boeing for instructions. Install the fasteners wet with 
sealant and put sealant fully around the collars and nuts after installation.

### Page 41

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 41 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 5: Remove seven fasteners from the OSLF, coldwork the holes and ream to 
the specified diameter. Install oversize fasteners. Remove twelve fasteners from the 
ISLF and inspect the holes for signs of damage.   Remove four fasteners from the 
OSLF and inspect the holes for signs of damage. For holes where no damage is found, 
install the standard size fastener. For holes where damage is found - increase the 
diameter of the hole, and install oversize fasteners. If the specified increase in the 
diameter does not remove the damage, write to Boeing for instructions. Install the 
fasteners wet with sealant and put sealant fully around the collars and nuts after 
installation. Install the support assembly. 
h. Install the kept support brackets and the fasteners for the hydraulic equipment on the side 
load fittings.   Use Collars BACC30X( ) supplied in kit 012N8042-25.
i. Remove the backup fitting and the side link attach fitting as shown in Figure 9:
— PANEL 1: Remove the bracket assembly, and move the tube. Move the wire bundles. 
Remove four fasteners through the side link fitting and the wing structure. 
— PANEL 2: Example of a tool to help with removal of a bolt through the support fitting. 
— PANEL 3: Remove the fasteners, and increase the diameter of the holes through the 
support fitting and the wing structure to the specified dimensions. Remove the support 
fitting. 
— PANEL 4: Increase the diameter of the holes through the side link and the wing 
structure to the specified dimensions. Remove the side link attach fitting. Keep the 
fitting for use in the hole transfer tool. 
j. Do the hole transfer procedures for the side link fitting as shown in Figure 10:
— PANEL 1: Install the index shim and the side link attach fitting removed in Figure 10, 
into the transfer tool. 
— PANEL 2: Install the potting plate, damming plate, bushings.
— PANEL 3: Install potting pins into the tool. Mix and apply the plaster around the 
bushings. Give the plaster sufficient cure time. Remove the potting plate, index shim, 
and the side link fitting.   
— PANEL 4: Install the new side link attach fitting into the transfer tool.
— PANEL 5: Install the potting plate from Panel 2. Use the handle drill bushings as guides 
and drill pilot holes through the new fitting. In sequence, increase the diameter of the 
holes with the drills and reamers to the dimensions shown. 
— PANEL 6: Measure the angle of the fastener holes. As necessary spot face and shot 
peen the holes.
— PANEL 7: Install the potting plate from Panel 2. Use the handle drill bushings as guides 
and drill pilot holes through the new fitting. In sequence, increase the diameter of the 
holes with the drills and reamers to the dimensions shown. Remove the fitting from the 
tool.
— PANEL 8: Make a tapered washer, as necessary.
k. Do the hole transfer procedures for the support fitting as shown in Figure 11:
— PANEL 1: Install the support fitting.
— PANEL 2:   Drill a pilot hole through the support fitting and the wing structure. In 
sequence, increase the diameter of the hole with the drills and reamers to the 
dimensions shown. Install a temporary fastener.
— PANEL 3: Install a shim below the support fitting. Drill pilot holes through the support 
fitting and the lower chord of the wing structure. In sequence, increase the diameter of 
the hole with the drills and reamers to the dimensions shown.

### Page 42

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 42 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 4: Install the transfer plate assembly to the lower chord with the bolt, washer, 
and nut shown. Install the damming plate to the transfer plate assembly with the screws 
shown. Put the bushings on the potting pins and install the pins into the holes in the 
wing structure. Install nuts on two on the potting pins. Put modeling clay around the pins 
and along three edges of the damming plate. Mix and apply the plaster with the syringe 
as shown. Give the plaster sufficient cure time. Remove the pins, damming plate, and 
transfer plate assembly. 
— PANEL 5: Put the drill jig assembly on a workbench. Install the index assembly to the 
drill jig assembly. Put the transfer plate assembly/bushings in position and install 
clamps as shown. With the transfer plate in the position shown, install the bushings and 
potting pins into the bushings in the transfer plate assembly. Mix and apply the plaster 
around the bushings. Give the plaster sufficient cure time. Remove the potting pins, 
transfer plate assembly.   
— PANEL 6: Put the new fitting into the drill jig assembly. Install a potting pin to hold the 
support fitting in position. Drill pilot holes through the support fitting. In sequence, 
increase the diameter of the hole with the drills and reamers to the dimensions shown. 
Remove the fitting from the drill jig.     
— PANEL 7: Machine and shot peen the spot faces as necessary.
l. Install the new tension clip, side link fitting, and backup support fitting shown in Figure 12:
— PANEL 1: Put and hold the new tension clip in position. Align the clip with the edge of 
the fitting. Measure the clearance between the clip and the surface of the fitting. If/as 
necessary, adjust the thickness of the laminated shim. Put and hold the shim in 
position. Use a handle drill bushing as a guide and drill pilot holes through the tension 
clip. Increase the diameter of the holes in the tension clip. Remove the tension clip. 
— PANEL 2: Machine and shot peen the spot faces for the two locations shown. Clean 
the clip and apply a chemical and primer to all bare areas. 
— PANEL 3: Put and hold the new tension clip in position. In sequence, increase the 
diameter of the hole with the drills and reamers to the dimensions shown. Remove the 
tension clip. 
— PANEL 4: Inspect the hole that goes through the lower chord and fitting for damage. 
Install the specified bushing in the hole. Machine the ends of the bushing flush with the 
structure.
— PANEL 5: Do an eddy current inspection on four of the holes. Make a note of the results 
of the inspection for use later. 
— PANEL 6: Put and hold the new support fitting and shim in position with temporary 
fasteners. In sequence, increase the diameter of the hole with the drills and reamers to 
the dimensions shown.
— PANEL 7: In sequence, increase the diameter of the hole with the drills and reamers to 
the dimensions shown through the support fitting and the wing lower chord.   
— PANEL 8: Put and hold the new tension clip and side link fitting in position with a 
temporary fasteners. Increase the holes to the specified diameters. Remove, clean and 
deburr the tension clip, shim and side link fitting. 
— PANEL 9: Remove, clean and deburr the support fitting and shim. 
— PANEL 10: Do an eddy current inspection on the holes if a crack was detected in panel 
5. If no cracks are detected, continue with the instructions. If a crack is detected write 
Boeing for instructions. 
— PANEL 11: Apply sealant to the mating surfaces and install the support fitting and shim 
with a sufficient quantity of temporary fasteners to hold it tightly against the structure. 
Install the fasteners wet with sealant. 
— PANEL 12: Put sealant on the mating surface of the new side link fitting and install the 
fasteners.

### Page 43

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 43 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 13: Increase the diameter of two holes, in the tension clip only, with the reamers 
to the dimensions shown.   Apply sealant to the mating surfaces of the tension clip. 
Install the tension clip with the specified fasteners. Install the bracket assembly and 
wire bundles.   
m. Install the dry bay Access Doors 532FZ/632FZ, and 532HZ/632HZ as given in the AMM 
28-11-07.
n. Install the main tank Access Doors 541BB/641BB, 541CB/641CB, 541DB/641DB as given 
in the AMM 28-11-01.
o. Do the fuel tank leak check shown in AMM 28-11-00.
4. PART IV - STRUT STRUCTURE CHANGES
a. Remove the bleed air assembly and components of the underwing faring as shown in Figure 
13. 
— PANEL 1: Remove and keep a panel, bleed air assembly, two shear clips, a block 
clamp, and a seal and seal retainer. 
— PANEL 2: Remove fasteners and remove and keep two angles.
— PANEL 3: Remove and keep the aft panel.
— PANEL 4: Remove fasteners for access. Remove the mid-spar fitting fasteners and 
increase hole diameters. Remove and keep the closeout angle, closeout panel, and the 
skirt fairing.
b. Put Tool MIT012N8042-1A on the strut and transfer the fastener locations from the mid-spar 
fittings to the drill plates as shown in Figure 14.
— PANEL 1: Assemble the aft drill plate (for the fasteners in the vertical tangs of the mid-
spar fittings).
— PANEL 2: Install the aft drill plate on the aft bulkhead.
— PANEL 3: Install the angle that attaches the aft drill plate to the aft bulkhead fitting.
— PANEL 4: Prepare to install the upper drill plate (for the fasteners in the horizontal tangs 
of the mid-spar fittings).
— PANEL 5: Install the upper drill plate on the top of the strut.
— PANEL 6: Transfer the hole locations from the mid-spar fittings to each of the drill 
plates. Remove the upper drill plate from the top of the strut.
— PANEL 7: Remove the aft drill plate from the aft bulkhead.
c. Remove the aft bulkhead assembly and mid-spar fittings as shown in Figure 15.
— PANEL 1: Remove and keep the heat blanket, hinge fittings, and shims. Apply dry ice 
to the strut side skins, at the area common to the aft bulkhead, to break the bond. 
Remove and keep the aft bulkhead and lower spar fitting as an assembly.
— PANEL 2: Remove and keep the splice plates and shims.
— PANEL 3: Remove and discard the mid-spar and side-link fittings. Remove and keep 
the shims and fillers common to the fittings.
d. Install the aft drill plate, new mid-spar fittings, side-link fittings, and clamping plate on aft 
bulkhead as shown in Figure 16. Measure gaps and make shims as necessary.
— PANEL 1: Install the aft drill plate on the aft bulkhead.
— PANEL 2: Put and hold the new mid-spar fittings on the aft bulkhead.
— PANEL 3: Put and hold the old splice plates and the new side-link fittings on the aft 
bulkhead.
— PANEL 4: Install the clamping plate on the aft bulkhead.

### Page 44

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 44 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 5: Install the upper drill plate and brace angles.
— PANEL 6: Install the parts and tooling assembly in the drill stand.
e. Use Tool MIT012N8042-1A to drill holes in the new mid-spar and side-link fittings then install 
these parts on the aft bulkhead as shown in Figure 17.
— PANEL 1: Assemble and adjust the drill motor.
— PANEL 2: Drill and ream holes common to the mid-spar fittings and aft bulkhead.
— PANEL 3: Remove the upper drill plate.
— PANEL 4: Remove the clamping plate and aft drill plate.
— PANEL 5: Clean, deburr, and reassemble the aft bulkhead, mid-par fittings, splice 
plates, and side-link fittings.
— PANEL 6: Install the fasteners common to the mid-spar fittings and aft bulkhead.
— PANEL 7: Reassemble the drill plates and angle braces on the aft bulkhead.
— PANEL 8: Put the parts and tooling assembly in the drill stand.
f. Use Tool MIT012N8042-1A to drill holes in the horizontal tangs of the mid-spar fittings as 
shown in Figure 18.
— PANEL 1: Assemble and adjust the drill motor.
— PANEL 2: Drill and ream holes in the horizontal tangs of the mid-spar fittings.
— PANEL 3: Remove all tooling.
g. Install the aft bulkhead assembly onto the strut as shown in Figure 19.
— PANEL 1: Put the shims in position on the strut.
— PANEL 2: Install the aft bulkhead assembly on the strut. Measure the distances 
between the mid-spar fittings and the strut. Remove the aft bulkhead assembly.
— PANEL 3: Put shims in position on the strut. Put the aft bulkhead assembly in position 
on the strut.
— PANEL 4: Install temporary fasteners. Turn the common bar and adjust the aft 
bulkhead assembly as necessary. Ream the specified fasteners common to the mid-
spar fitting.
— PANEL 5: Put the hinge fitting and shims in position with temporary fasteners. Turn the 
common bar and adjust the aft bulkhead assembly as necessary. Ream the holes on 
the bottom of the strut.
— PANEL 6: Ream the holes common to the side skin and the aft bulkhead, both sides.
— PANEL 7: Remove all the parts. Deburr all of the holes. Apply primer to the shims not 
already coated. Apply sealant to all the mating surfaces.
— PANEL 8: Install the aft bulkhead assembly and shims. Install the fasteners common 
to the side skin but do not tighten the collars.
— PANEL 9: Install the hinge fittings and shims. Install the fasteners common to the hinge 
fittings but do not tighten the collars. 
— PANEL 10: Install the fasteners common to the mid-spar fittings but do not tighten the 
collars. Turn the common bar and adjust the aft bulkhead assembly as necessary. 
Tighten all of the collars. Remove the common bar and sleeves. 
h. Make modifications to the aft strut fairing as shown in Figure 20.
— PANEL 1: On the outboard side of the panel assembly, remove and discard angle. 
Install two rivets. Cut the web and angle up 0.25 inches to give clearance for the new 
mid-spar fitting. Remove the three remaining fasteners.
— PANEL 2: Put the new doubler in position. Drill the doubler to match the existing web. 
Mark the outline of the doubler on the web. Remove the doubler.
— PANEL 3: Put the new shim in position. Mark the outline of the shim on the web. 
Remove the shim.

### Page 45

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 45 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 4: Cut the web and angles, follow the outline marked. Remove the scrap. Apply 
alodine and primer to the web and angles.
i. Make modifications to the closeout panel as shown in Figure 21.
Remove and discard the existing angles. Put new doublers in position. Drill the doublers to 
match the existing panel. Install the new doublers on the panel.
j. Install the aft fairing on the aft end of the Intermediate Seal Installation as shown in Figure 
22.
— PANEL 1: Put the closeout panel and closeout angle in position. Drill the closeout angle 
to match the existing parts. Ream the closeout panel, closeout angle and strut as 
specified.
— PANEL 2: Put the aft panel in position. Put the new doubler, filler and shim in position 
on the outboard side of the aft panel.
— PANEL 3: Put the new angle in position of the outboard side of the aft panel. Drill the 
holes specified.
— PANEL 4: Ream the holes specified on the outboard side of the strut.
— PANEL 5: Ream the holes specified on the inboard side of the strut.
— PANEL 6: Ream the holes specified on the upper side of the strut. Remove the aft 
panel, angle, shim, filler, doubler, and closeout panel. Deburr all the open holes.
— PANEL 7: Remove the closeout angle and shim. Deburr the holes. Apply sealant to the 
mating surfaces and install the closeout angle and shim.
— PANEL 8: Apply sealant to the mating parts. Install the aft panel, angle, shim, filler, 
doubler, and closeout panel. 
— PANEL 9: Install the specified fastener.
— PANEL 10: Install the specified fastener. Install the angle removed for access on the 
aft end of the strut.
— PANEL 11: Install the fasteners removed for access on the sides of the strut. Install the 
panel with parting agent and sealant. Install the bulbseal and retainer. Apply adhesive 
to the bulbseal at the corners of the aft panel.
k. Apply sealant, leveling compound to the strut as shown in Figure 23.
— PANEL 1: Apply sealant to the area common to the aft side of the aft panel, the side 
load fittings, the mid-spar fittings, and the closeout panel. Install rigid foam between the 
side load fittings and the closeout panel.
— PANEL 2: Apply sealant to the forward side of the aft panel and mid-spar fittings. Apply 
sealant around the lower spar fitting, and the hinge fittings.
— PANEL 3: Lift the forward end of the strut until you get the degrees specified.
— PANEL 4: Lift the side of the strut until you get the degrees specified.
— PANEL 5: Apply primer. Let the primer dry for a minimum of 60, a maximum of 24 
hours, then apply leveling compound. Apply the leveling compound to the aft side of 
the strut common to the inboard mid-spar fitting and the aft panel.
NOTE: As an alternative to applying the primer and leveling compound before strut
installation, it is optional to apply the primer and leveling compound after strut
installation. Make sure the airplane is in the correct attitude so that the strut is at
the angles shown in PANEL 3 and PANEL 4 during application of the leveling
compound.
l. Install the remaining parts that were removed for access, as shown in Figure 24.
— PANEL 1: Install the heat blanket, and fairings.
— PANEL 2: Install the clamp block and support angles

### Page 46

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 3: Put the shear clips and tube assembly in position. Ream the holes. Remove 
the parts and deburr the holes. Apply sealant to the mating parts and install the shear 
clip and tube assembly.
5. PART V - STRUT INSTALLATION CHANGES
a. Prepare to install the strut as shown in AMM 54-51-01.
b. Install the struts as given in AMM 54-51-01 with the mid-spar fuse pins, upper link, and side 
links shown in Figure 25:
— PANEL 1: Install the new mid-spar fuse pins as shown.
— PANEL 2: Install the new upper link with the fuse pin and the bolt as shown.
— PANEL 3: Adjust the position of the strut until you get the clearance shown. 
— PANEL 4: Adjust the length of the gage assembly to the distance between the bushing 
in the wing fitting and the bushing in the strut fitting. Tighten the cap screws to hold the 
length of the assembly. 
— PANEL 5: Put and hold the jig assembly to a workbench. Put the gage assembly and 
the new link assembly in the tool. Put the new bushing in position. Install the sleeve 
assembly and the flange nut. Tighten the flange nut to push the bushing a quarter of 
the way into the link assembly. Remove the flange nut and the sleeve. 
— PANEL 6: Put the link assembly on the strut to confirm the bushing position
— PANEL 7: Remove the link assembly form the strut and fully install the bushing.   
— PANEL 8: Put the new retainer on the link assembly to hold the position of the bushing. 
Hold the two together and remove from the tool. Drill the pilot hole in the link assembly 
through the retainer. Apply sealant to the mating surfaces and install the retainer with 
the specified fasteners.   
— PANEL 9: Install the new link assemblies with the fuse pins and bolts shown. 
c. Install the remaining fasteners into Lower Spar Fitting as shown in Figure 26.
d. Group 1 only: Measure the length and bore the forward end of the diagonal brace as shown 
in Figure 27:
— PANEL 1: Install and adjust the length of the measuring assembly. Use the wedges to 
hold the measuring assembly tight against the face of the bushings in the fittings. Apply 
inspection putty to the movable part of the measuring assembly. Remove the 
measuring assembly. 
— PANEL 2: Install the measuring assembly and adjust the length of the boring frame 
assembly as shown. Apply inspection putty to the movable part of the boring frame 
assembly. Remove the measuring assembly.   
— PANEL 3: Install the index assemblies and the index shim on the boring frame 
assembly. Move the slide block as far forward as possible. 
— PANEL 4: Install the new diagonal brace into the boring frame assembly as shown. 
— PANEL 5: Install the boring bar and the nose adapter onto the power-feed motor 
assembly as shown.
— PANEL 6: Install the bushings and the nose adapter. Install the motor assembly. Apply 
grease to the grease fittings. Loosen the upper stop collar on the motor assembly. 
Adjust the travel of the drive spindle. Tighten the upper stop collar and retract the drive 
spindle. 
— PANEL 7: Assemble the mist pump and point the nozzles at the bore of the diagonal 
brace. Install the cutter assemblies into the boring bar. Operate the motor assembly. 
Do this procedure with each of the cutter assemblies until you get the largest of the 
specified diameters. Remove the motor assembly and remove the nose adapter and 
the boring bar from the motor.

### Page 47

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
NOTE: To decrease the total flowtime necessary to do this service bulletin, you can try to
install a pre-drilled and bushed 311N3730-21 diagonal brace as an alternative to
the uniquely made part given in Fig. 27 through 30. Before you make that decision,
it is important to know how the diagonal braces were initially made and installed on
each airplane.
On airplanes line number less than 560, each diagonal brace was measured, 
bored, and bushed when it was installed on the airplane. For this reason, each 
diagonal brace was unique.
A trial program was started on airplane line numbers 560 through 599 to find out if 
pre-drilled and bushed diagonal braces could be installed on the airplanes as given 
in AMM 54-51-00. This maintenance procedure tells the operator that the 
installation preload cannot be more that 3000 pounds. While the trial program was 
successful, Boeing cannot be sure that the 311N3730-21 diagonal brace can be 
installed on airplane line numbers 560 through 599.
After the successful trial, pre-drilled and bushed diagonal braces were installed on 
airplanes line number 600 through 735. In the same way, pre-drilled and bushed 
311N3730-21 diagonal brace has been installed on airplanes line numbers 736 and 
on.
Based on the size of your fleet and the airplane line numbers, you may want to 
purchase two 311N3730-21 diagonal braces and find out if they can be installed (as 
given in AMM 54-51-00) when you do this service bulletin. If the 311N3730-21 
diagonal braces can be installed as given in the AMM, you can change the 
311N3730-22 diagonal braces contained in the parts kit to 311N3730-21 diagonal 
braces (per the drawing) for possible installation on other airplanes.
e. Group 1 only: Chamfer the bore in the forward end of the diagonal brace as shown in Figure 
28:
— PANEL 1: Install the boring bar and the nose adapter onto the hand-feed motor 
assembly as shown.
— PANEL 2: Apply grease to the grease fittings. Put the motor assembly into the boring 
frame assembly. Put the mist pump in position. Extend the drive spindle and install the 
chamfer assembly into the boring bar. Make the chamfer as shown. Do this procedure 
for each of the remaining chamfers. Remove the motor assembly, and remove the nose 
adapter and the boring bar from the motor. Remove the diagonal brace. 
f. Group 1 only: Install the bushings in the forward end of the diagonal brace as shown in 
Figure 29:
— PANEL 1: Hone the bore of the diagonal brace to the specified diameter.
— PANEL 2: Assemble and adjust the hydraulic pump and cylinder. Install the adapter on 
the hydraulic cylinder. Put the guide bushings into the bores of the diagonal brace and 
install the spacer. Put the collar into the new outer bushing, and together, put them in 
liquid nitrogen. Put the hydraulic cylinder in position, remove the collar and bushing 
from the nitrogen and quickly put into position. Hold the C-stop in position and operate 
the pump to pull the bushing into the bore. 
— PANEL 3: Put the guide bushing into the bore. Put the collar into the second outer 
bushing, and together, put them in liquid nitrogen. Put the hydraulic cylinder in position 
and adjust the length of the shaft. Remove the collar and bushing from the nitrogen and 
quickly put into position. Hold the C-stop in position and operate the pump to pull the 
bushing into the bore. Remove the collars and the guide bushing.

### Page 48

May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 48 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
— PANEL 4: Install the hone assembly into the drill motor assembly. Put oil in the inner 
surface of the truing sleeve and push the stone set into the sleeve to align. Hone the 
outside bushings to the specified finish and diameter.
— PANEL 5: Put the guide bushing into the bore. Put the collar into the first inside 
bushing, and together, put them in liquid nitrogen. Put the hydraulic cylinder in position 
and adjust the length of the shaft. Remove the collar and bushing from the nitrogen and 
quickly put into position. Hold the C-stop in position and operate the pump to pull the 
bushing into the bore of the outside bushing. Remove the guide bushing. 
— PANEL 6: Put the collar into the second inside bushing, and together, put them in liquid 
nitrogen. Put the hydraulic cylinder in position and adjust the length of the shaft. 
Remove the collar and bushing from the nitrogen and quickly put into position. Hold the 
C-stop in position and operate the pump to pull the bushing into the bore of the outside 
bushing. Remove the collar. 
— PANEL 7: Install the hone assembly into the drill motor assembly. Put oil in the inner 
surface of the truing sleeve and push the stone set into the sleeve to align. Hone the 
inside bushings to the specified diameter. Change stone sets and hone the inside 
bushings to the specified finish and diameter. 
g. Group 1: Install the diagonal brace as shown in Figure 30:
— PANEL 1: Install the diagonal brace to the strut fitting as shown.
— PANEL 2: Install the diagonal brace to the wing fitting as shown.
— PANEL 3: Install the clips, blocks, bolts, clamps and wire bundle on the diagonal brace.
h. Group 2 (Freighters): Install the Diagonal Brace (kept) as shown in AMM 54-51-01. 
i. Refer to the AMM 54-51-01 and do the procedures, as necessary, to put the airplane back 
to its usual condition.

### Page 49

FIGURE 1: OVERVIEW - WING AND STRUT MODIFICATION
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 49 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
FIGURE  1:  OVERVIEW - WING AND STRUT MODIFICATION
PANEL 1
4 3
2
1
R96610
(SHEET 1 OF 5)

### Page 50

FIGURE 1: OVERVIEW - WING AND STRUT MODIFICATION
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 50 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
PANEL 2
6
5
7
8
R90409
(SHEET 2 OF 5)

### Page 51

FIGURE 1: OVERVIEW - WING AND STRUT MODIFICATION
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 51 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
PANEL 3
11
9
9
10
12
13
R92502
(SHEET 3 OF 5)

### Page 52

FIGURE 1: OVERVIEW - WING AND STRUT MODIFICATION
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 52 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
PANEL 4
SB 757-54A0019
SB 757-54-0042
SB 757-54-0026
17
14
15
16
SB 757-54-0036
SB 757-54-0027
SB 757-54-0026
SB 757-54-0026
SB 757-54-0037
SB 757-54-0027
TERMINATED BY STRUT IMPROVEMENT SERVICE BULLETIN
ITERIM ACTION NECESSARY
STRUT IMPROVEMENT SERVICE BULLETIN
RECOMMENDED SERVICE BULLETIN
S14849
(SHEET 4 OF 5)

### Page 53

FIGURE 1: OVERVIEW - WING AND STRUT MODIFICATION
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 53 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
PANEL 1:
ITEM DESCRIPTION
1 Replace the fasteners that hold the inboard and outboard side load fittings to the wing structure 
with stronger fasteners. At some locations, coldwork the holes before installation of the stronger 
fasteners
2 Replace the side link attach fitting with a new stronger fitting made of 7050 Aluminum Alloy.
3 Replace the support fitting with a new fitting that is larger and stronger
4 Install a tension clip to increase the strength of the wing structure.
PANEL 2:
ITEM DESCRIPTION
5 Replace the midspar fittings, and side link fittings with new assemblies. The midspar fittings are 
stronger and have thicker tangs, they are made of stainless steel. The side link fittings are 
stronger and thicker.
6 Replace the closeout angle with a new angle that has larger joggles to give clearance for the 
thicker tangs on the new midspar fittings.
7 Replace the doubler with new stainless steel doublers that are thinner to give clearance for the 
new side links.
8 Install a new angle, doublers to give clearance for the thicker tang on the new midspar fitting.
PANEL 3:
ITEM DESCRIPTION
9 Replace the fuse pin installation with a new stronger fuse pin installation.
10 Replace the fuse pin installation with a new stronger fuse pin installation.
11 Replace the side links with new stronger side links made of titanium.
12 Replace the bolt installation with a longer installation that has a cotter pin.
13 Replace the diagonal brace with a new stronger diagonal brace made of titanium. (Group 1 only)
PANEL 4:
ITEM DESCRIPTION
14 These service bulletins give instructions about structural changes that must be done before or at 
the same time this service bulletin is completed. These changes are necessary to keep the 
damage tolerance rating for continued operations without special inspections.
15 These service bulletins give instructions about structural changes that do not have a direct effect 
on the damage tolerance rating of the structure, but are important in-service problems with 
primary structure that can be corrected before or at the same time this service bulletin is 
completed.
16 These service bulletins are terminated since the components are replaced during the changes 
give in Service Bulletin 757-54-0034.
17 These service bulletins give instructions about inspections and structural changes that must be 
done to keep a satisfactory damage tolerance rating of the structure until the changes given in 
Service Bulletin 757-54-0034 are completed.
(SHEET 5 OF 5)

### Page 54

FIGURE 2: STRUT WORKSTAND
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 54 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
FIGURE  2:  STRUT WORKSTAND
5 LOCATIONS
3 LOCATIONS
A-A
165.00
77.55
20.00
45.50
21 LOCATIONS
A
A
1
2
5
4
3
4
BSEE
SEE A
R76339
(SHEET 1 OF 5)

### Page 55

FIGURE 2: STRUT WORKSTAND
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 55 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
4 LOCATIONS
2 LOCATIONS
5 LOCATIONS
2 LOCATIONS
4 LOCATIONS
4 LOCATIONS
8
SEE F9
A
17
6
16
18
15
22
SEE C
20
21
19
24
23
B
7
10
13
SEE E11
SEE D12
14
R76759
(SHEET 2 OF 5)

### Page 56

FIGURE 2: STRUT WORKSTAND
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 56 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
(4 LOCATIONS)
6.38
10.80
12.50
1.13
7.50
x 0.50 DEEP
(2 LOCATIONS)
COUNTER BORE 1.12 DIA
DRILL 0.437 DIA
TAP 0.50 - 13
(2 LOCATIONS)
DRILL 0.437 DIA
2.00 x 2.00 NOTCH
12.50
6.38
7.50
2.75
1.50
MAXIMUM
3.50
(2 LOCATIONS)
0.437
9.90 6.25
5.30
8.75
(4 LOCATIONS)
DRILL 0.437 DIA
COUNTERSINK 0.38 DIA
x 0.18 DEEP
(4 LOCATIONS)
TAP 0.25-20
0.875 DIA X 2.00 LONG
DRILL/MACHINE
F
E
D
C
R76833
(SHEET 3 OF 5)

### Page 57

FIGURE 2: STRUT WORKSTAND
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 57 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
NOTE: Only operator supplied parts are used in this figure.
STEP TASK NAME MATERIAL QTY NOTES
1 Make/ Install Cross Member Wood 5 4 x 4 x 48, spaced 40-3/8 
inches apart.
2 Make/ Install Stringer Wood (a) 3 4 x 4 x 167-1/2
3 Make/ Install Deck Plywood (a) 1 3/4 x 45-1/2 x 55
4 Make/ Install Spacer Wood (a) 3 4 x 4 x 45-1/2, place under 
supports.
5 Install Carriage Bolt Steel 21 (b) 3/8-16 x 7-1/4 
Washer, Flat Steel 21 3/8 inner diameter
Nut Steel 21 3/8-16
6 Make/ Install Support Wood (a) 5 2 x 8 x 25-1/2
7 Make/ Install Spacer Plywood (a) 1 1 x 7-1/2 x 25-1/2
8 Make/ Install Support Wood (a) 4 2 x 8 x 12-1/2
9 Make/ Install Spacer Wood (a) 1 2 x 8 x12-1/2
10 Make/ Install Spacer Plywood (a) 1 1/2 x 7-1/2 x 12-1/2
11 Install Attach Bolt Steel 2 1/2-13 x 3-1/2
12 Make/ Install Mounting Plate Aluminum Plate 1 (c) 1 x 7-1/2 x 12-1/2 
13 Install Threaded Rod Steel 2 (d) 3/8-16 x 27
Washer, Flat   Steel 2 3/8 inner diameter
Nut Steel 2 3/8-16
14 Make/ Install Pad Rubber Sheet 1 1/2 x 7-1/2 x 12-1/2
Apply Adhesive Contact Cement -
15 Make/ Install Support Plywood (a) 1 1 x 20 x 21-1/2
16 Make/ Install Support Wood (a) 2 4 x 4 x 20
17 Make/ Install Support Wood (a) 2 2 x 4 x 20
18 Make/ Install Support Wood (a) 1 2 x 12 x 21-1/2
19 Make/ Install Mounting Pad Aluminum Plate 1 (c) 3/4 x 11-1/4 x 21-1/2
20 Install Carriage Bolt Steel 4 3/8-16 x 16-1/2
Washer, Flat Steel 4 3/8 inner diameter
Nut Steel 4 3/8-16
21 Install Flat Head Machine 
Screw
Steel 4 1/4-20 x 3
Washer, Flat Steel 4 1/4 inner diameter
Nut Steel 4 1/4-20
22 Make/ Install Pad Rubber Sheet 3 1/2 x 4 x 11-1/2
Apply Adhesive Contact Cement -
(SHEET 4 OF 5)

### Page 58

FIGURE 2: STRUT WORKSTAND
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 58 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
23 Make/ Install Pad Rubber Sheet 1 1/2 x 4 x 11-1/2
Apply Adhesive Contact Cement -
24 Install Attach Bolt Steel 2 1/2-13 x 4
Washer, Flat Steel 2 1/2 inner diameter
(a) Install with nails and adhesives as necessary.
(b) Countersink carriage bolt assemblies to be flush with plywood deck, and cross members.
(c) Break sharp edges.
(d) Countersink bolt assemblies to be flush with cross members.
STEP TASK NAME MATERIAL QTY NOTES
(SHEET 5 OF 5)

### Page 59

FIGURE 3: REMOVAL - SPECIFIED FASTENERS
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 59 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
FIGURE  3:  REMOVAL - SPECIFIED FASTENERS
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
No part or tool kits are used in this figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Remove Fasteners - 4
A
A
A-A
FWD
1
R80313
(SHEET 1 OF 1)

### Page 60

FIGURE 4: DISCARD/KEEPS - STRUT REMOVAL
May 14, 1998
Revision 2:  May 07, 2009 757-54-0034
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 60 of 270
BOEING SERVICE BULLETIN 757-54-0034
 
 
FIGURE  4:  DISCARD/KEEPS - STRUT REMOVAL
PANEL 1
8
5
6
7
7
6
2
1 4 LOCATIONS
7 LOCATIONS
2
1 4 LOCATIONS
7 LOCATIONS
5
3
4
A
ASEE
A
DIAGONAL BRACE FITTINGS
LINE NUMBER 1-618, WITH SB 757-54-0027
AND LINE NUMBER 619-732
LINE NUMBER 1-618, WITHOUT
DIAGONAL BRACE FITTINGS
SB 757-54-0027
R98380
(SHEET 1 OF 7)

The text continues at https://openairdocs.org/service-documents/boeing/sb-757-54-0034/file/f9bef4596d79.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
