# Boeing Special Attention Service Bulletin 757-57-0065: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-0030; AD 2012-02-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 757-57-0065](https://openairdocs.org/service-documents/boeing/sb-757-57-0065.md)
- Title as filed: U.S. DOT/FAA - Boeing - SB-757-57-0065-01
- Pages: 29
- PDF: https://openairdocs.org/files/sha256/50/84/5084444f7a6f1add5b954908f5265ce963569f0434118b1791c1211c8579a3ec
- Page: https://openairdocs.org/service-documents/boeing/sb-757-57-0065/file/5084444f7a6f

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-57-0065
Original Issue: May 14, 2009
Revision 1: August 01, 2011
ATA System: 5720
SUBJECT: WING - Outerwing - Front Wing Spar Lower Chord At WS 292 Pylon Sidelink Fitting -
Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2009 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
1 of 29
3.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
2 of 29
BOEING SERVICE BULLETIN 757-57-0065
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 4
B. Concurrent Requirements ...................................... 1 5
C. Reason ................................................ 1 5
D. Description .............................................. 1 5
E. Compliance .............................................. 1 6
F. Approval ............................................... 1 6
G. Manpower .............................................. 1 7
H. Weight and Balance Changes .................................... 1 7
I. Electrical Load Data ......................................... 1 7
J. References .............................................. 1 7
1. Existing Data: ......................................... 1 7
2. Data supplied with this Service Bulletin: ........................... 1 8
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 8
K. Publications Affected ........................................ 1 8
L. Interchangeability and Intermixability of Parts ........................... 1 8
2. MATERIAL INFORMATION ........................................ 1 9
A. Material - Price and Availability ................................... 1 9
B. Industry Support Information .................................... 1 9
C. Parts Necessary For Each Airplane ................................. 1 9
1. Kits/Parts: ........................................... 1 9
2. Parts and Materials Supplied by the Operator: ........................ 1 9
3. Parts Modified and Reidentified: ............................... 1 9
4. Parts Removed and Not Replaced: .............................. 1 9
D. Parts Necessary to Change Spares ................................. 1 9
E. Special Tooling - Price and Availability ............................... 1 9
F. Special Tooling Necessary to do this Service Bulletin ....................... 1 9
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 1
A. GENERAL INFORMATION ..................................... 2 1
B. WORK INSTRUCTIONS ....................................... 2 2
FIGURE 1: GAIN ACCESS TO THE FRONT SPAR LOWER CHORD HORIZONTAL FLANGE .... 2 4
FIGURE 2: INSPECT LEFT WING FRONT SPAR LOWER CHORD HORIZONTAL FLANGE ..... 2 6
FIGURE 3: INSPECT RIGHT WING FRONT SPAR LOWER CHORD HORIZONTAL FLANGE .... 2 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
3 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
4 of 29
BOEING SERVICE BULLETIN 757-57-0065
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 757-57-0065Original Issue: May 14, 2009
Revision 1: August 01, 2011
ATA System: 5720
SUBJECT: WING - Outerwing - Front Wing Spar Lower Chord At WS 292 Pylon Sidelink Fitting -
Inspection
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2009-NM-135-AD, is related to
this service bulletin.
No more work is necessary on the airplane(s) changed in accordance with the original issue of this service
bulletin.
REASON FOR REVISION
This revision is sent to reference the (FAA) Notice of Proposed Rule Making and update the view of the support
fitting in Figures 2 and 3 to show the 3 possible support fittings that may be installed.
These sections were changed:
1. Summary Compliance - Added reference to the (FAA) Notice of Proposed Rule Making.
2. Description Section 1.D. - Added the no more work statement, maintenance zone table.
3. Compliance Section 1.E. - Added reference to the (FAA) Notice of Proposed Rule Making.
4. Reference Section 1.J. - Added reference to the (FAA) Notice of Proposed Rule Making.
5. General Information Section 3.A. - Updated the general note to the current standard.
6. Work Instructions Section 3.B. - Added a clean step prior to the inspection step and added information for
the operators to use the view that matches their support fitting, to the inspection step.
7. Figure 1 - Added note (a) to step 1.
8. Figures 2 and 3 - Updated the graphic to show the 3 possible support fittings that may be installed.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
5 of 29

### Page 6

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
May 14, 2009Original Issue:
August 01, 2011Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
6 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 7

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-57-0065Original Issue: May 14, 2009
Revision 1: August 01, 2011
ATA System: 5720
SUBJECT: WING - Outerwing - Front Wing Spar Lower Chord At WS 292 Pylon Sidelink Fitting -
Inspection
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Boeing Service Related Problem (SRP) 757-57-0187 is related to this service bulletin.
The purpose of this service bulletin is to provide an inspection to find any crack in the front spar lower chord at
the four fastener locations common to the side link support fitting at WS 292. This area is not covered by the
normal maintenance activities. Over the past 7 years several operators have reported finding cracks in this area.
The cracks were repaired by oversizing the holes and installing freeze plugs. If any crack was to go undetected
for a long period of time, it will grow to a critical length which could result in structural failure of the wing.
Service History
Report DescriptionCrack LengthFlight CyclesDate
Oversized hole and installed freeze plug.0.03029,2092/23/01
Oversized hole and installed freeze plug0.08025,3366/19/01
Oversized hole and installed freeze plug.0.08013,1008/5/04
(LH) 2 outboard holes had cracks c/t the spar chord aft
flange. Oversized holes and installed freeze plugs.
0.03222,02711/10/04
(RH) outboard hole had a crack c/t the spar chord fwd
flange. Oversized hole and installed freeze plug.
0.05511/13/04
(LH) Damage removed by chamfering.0.02533,5063/27/07
(RH) Oversized hole and installed next size bolt.0.032
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
7 of 29

### Page 8

ACTION (PRR 54530-274RS)
Gain access as required to the inside of the wing fuel tank. The access panel is located on the lower side of the
wing between the ribs at WS 285.65 and WS 313.50. Access the front spar by removing the drybay partition.
Perform an ultrasonic inspection of the wing front spar lower chord horizontal flange at WS 294 and look for any
crack. Perform a general visual inspection for corrosion in this same area. If any crack or corrosion is found,
contact Boeing for repair instruction. Close the access and reinspect at the times indicated in the compliance
section of this service bulletin.
EFFECTIVITY
All 757-200, -200CB, -200PF & -300 Airplanes. See Service Bulletin Paragraph 1.A.1 for effectivity.
COMPLIANCE
Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2009-NM-135-AD, is related to
this service bulletin..
See Service Bulletin Paragraph 1.E. for compliance information.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection given in this service bulletin.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
3.2513.00Open Access
3.006.00Inspect
(a)(a)Repair
1.255.00Close Access
7.5024.0Total For Each
Airplane
(a) Repair Time is dependent on the extent of corrosion or
number of cracks found
MATERIAL INFORMATION
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
8 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 9 (OCR)

BOEING SERVICE BULLETIN 757-57-0065
WSTA
285.65
WSTA
313.5
MAIN
FUEL
TANK
MAIN TANK
ACCESS DOOR
DRY
BAY
FRONT SPAR
UPPER CHORD
SIDE LINK
WS  SUPPORT
292  FITTING
FRONT SPAR  INSPECT FASTENER HOLES
LOWER CHORD  UNDER THE SIDE LINK
SUPPORT FITTING FOR
ANY CRACK.
DRY BAY
ACCESS DOOR
INSPECT AREA  INBD
AROUND SIDE LINK  FWD <
SUPPORT FITTING
FOR CORROSION.
LEFT WING SHOWN  U51606
RIGHT WING OPPOSITE
Original Issue: May 14, 2009
Revision 1: August 01, 2011  BOEING PROPRIETARY -  757-57-0065
Copyright © Unpublished Work - See page 1 for details.  9 of 29

### Page 10

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
10 of 29
BOEING SERVICE BULLETIN 757-57-0065
BLANK PAGE

### Page 11

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-57-0065
Original Issue: May 14, 2009
Revision 1: August 01, 2011
ATA System: 5720
SUBJECT: WING - Outerwing - Front Wing Spar Lower Chord At WS 292 Pylon Sidelink Fitting -
Inspection
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below. Refer to PRR 54530-274RS for data about
this change.
DESCRIPTIONCONFIGURATIONGROUP
All 757-200, -200CB, -200PF & -300 airplanes-1
Airplane Models:
757-200, 757-200CB, 757-200PF, 757-300
GroupVariable Number
1NA001 - NA028
1NA191 - NA199
1NA201 - NA239
1NA301 - NA305
1NA341 - NA352
1NA391 - NA399
1NA401 - NA408
1NA441 - NA447
1NA501 - NA586
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
11 of 29

### Page 12

GroupVariable Number
1NB001 - NB004
1NB021 - NB023
1NB036 - NB041
1NB051 - NB053
1NB061 - NB073
1NB079
1NB131 - NB148
1NB161 - NB162
1NB166 - NB168
1NB201 - NB204
1NB221 - NB228
1NB230
1NB236
1NB239
1NB261 - NB267
1NB291 - NB299
1NB301 - NB302
1NB311 - NB312
1NB321 - NB331
1NB421 - NB438
1NB446
1NB451 - NB454
1NB501 - NB523
1NB561
1NB571
1NB581 - NB583
1NC001 - NC033
1NC041 - NC042
1NC051 - NC052
1NC056 - NC062
1NC066 - NC084
1NC091 - NC094
1NC151
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
12 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 13

GroupVariable Number
1NC161
1NC901 - NC951
1NC971 - NC974
1ND001 - ND007
1ND011 - ND059
1ND111 - ND113
1ND161 - ND199
1ND201 - ND203
1ND221 - ND225
1ND241 - ND248
1ND301 - ND322
1ND401
1ND891
1ND895
1NE001 - NE008
1NE011 - NE088
1NE091 - NE094
1NE141 - NE150
1NE161 - NE177
1NE201 - NE204
1NE301 - NE302
1NE311 - NE325
1NJ001 - NJ004
1NJ031 - NJ032
1NJ551 - NJ555
1NL001 - NL002
1NL006 - NL017
1NL101 - NL109
1NL141
1NL601 - NL616
1NN001 - NN002
1NN051 - NN052
1NP901 - NP904
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
13 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 14

GroupVariable Number
1NS601 - NS616
1NT001 - NT009
1NT201 - NT202
1NT231 - NT234
1NT237 - NT240
1NT242
1NT245 - NT248
1NT281 - NT289
1NT341 - NT347
1NT351 - NT360
1NT371 - NT373
1NT375 - NT379
1NT381 - NT386
1NT401 - NT409
1NT411 - NT412
1NT426 - NT427
1NT431 - NT432
1NT436 - NT438
1NT441 - NT442
1NT446
1NT701 - NT769
1NT791 - NT796
1NT861 - NT862
1NT881 - NT885
1NT901 - NT916
1NT971 - NT985
1NU031 - NU038
1NU701 - NU705
1NU721 - NU728
1NU731 - NU732
2. Spares Affected
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
14 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 15

B. Concurrent Requirements
None.
C. Reason
Boeing Service Related Problem (SRP) 757-SRP-57-0187 is related to this service bulletin.
The purpose of this service bulletin is to provide an inspection to find any crack in the front spar lower
chord at the four fastener locations common to the side link support fitting at WS 292. This area is not
covered by the normal maintenance activities. Over the past 7 years several operators have reported
finding cracks in this area. The cracks were repaired by oversizing the holes and installing freeze plugs.
If any crack was to go undetected for a long period of time, it will grow to a critical length which could
result in structural failure of the wing.
Revision 1 is sent to add the reference to the (FAA) Notice of Proposed Rule Making and update the
view of the support fitting in Figures 2 and 3 to show the 3 possible support fittings that may be installed.
Service History
Report DescriptionCrack LengthFlight CyclesDate
Oversized hole and installed freeze plug.0.03029,2092/23/01
Oversized hole and installed freeze plug0.08025,3366/19/01
Oversized hole and installed freeze plug.0.08013,1008/5/04
(LH) 2 outboard holes had cracks c/t the spar chord aft
flange. Oversized holes and installed freeze plugs.
0.03222,02711/10/04
(RH) outboard hole had a crack c/t the spar chord fwd
flange. Oversized hole and installed freeze plug.
0.05511/13/04
(LH) Damage removed by chamfering.0.02533,5063/27/07
(RH) Oversized hole and installed next size bolt.0.032
D. Description
Gain access as required to the inside of the wing fuel tank. The access panel is located on the lower
side of the wing between the ribs at WS 285.65 and WS 313.50. Access the front spar by removing
the drybay partition. Perform an ultrasonic inspection of the wing front spar lower chord horizontal
flange at WS 294 and look for any crack. Perform a general visual inspection for corrosion in this same
area. If any crack or corrosion is found, contact Boeing for repair instructions. Close the access and
reinspect at the times indicated in the compliance section of this service bulletin.
NOTE: Due to common access requirements, the operator should consider working Service
Bulletin 757-54-0034 and 757-54-0035 at the same time as this service bulletin on
the applicable airplanes.
1.
2. If the damaged area is more than the specified limits, write to Boeing for repair
instructions. Give the size and location of the damage. When possible, send sketches
and photographs. If the damage includes corrosion, send data on the length, width,
and largest depth of clean up.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
15 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 16

Send to: BOEING COMMERCIAL AIRPLANES GROUP ATTENTION: MANAGER,
AIRLINE SUPPORT
Revision 1 - No more work is necessary on airplanes changed in accordance with the original issue of
this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
532, 541, 632, 641757-200, 757-200CB, 757-
200PF, 757-300
E. Compliance
Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2009-NM-135-AD, is
related to this service bulletin.
Table 1: Required Times for Ultrasonic and General Visual Inspection and Repair of the Wing Front Spar
Lower Chord Horizontal Flange..
Repeat Interval (Not
to Exceed)
Compliance Time (Which ever occurs
later)
ActionCondition
12,000 Flight CyclesPrior to 37,500 Total Flight Cycles or 20
years since the date of issuance of the
original standard certificate of airworthi-
ness, whichever occurs first.
Ultrasonic and General vi-
sual Inspection as given in
Accomplishment instruc-
tion 3.B.5
All airplanes
Within 3,000 flight cycles after the date
on this service bulletin.
Within 12,000 flight cycles after incorpo-
ration of the modification requirements
of AD 2003-18-05 or AD 2004-12-07
-Prior to further flightContact Boeing for addition-
al repair instructions and
perform the repair.
Any crack or Cor-
rosion found dur-
ing Accomplish-
ment instruction
3.B.5
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
16 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 17

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this Service Bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task-hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Elapsed HoursTask-HoursNumber of PersonsTask
3.2513.004Open Access
3.006.002Inspect
(a)(a)Repair
1.255.004Close Access
7.5024.00TOTAL FOR EACH AIRPLANE
(a) Repair Time is dependent on the extent of corrosion or number of cracks found
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 54530-274RS
b. Service Related Problem (SRP) 757-57-0187
c. 757 Maintenance Manual (AMM) Subject 757 AMM 28-11-00,757 AMM 28-11-01, 757 AMM
28-11-07, 757 AMM 28-26-00
d. 757 Structural Repair Manual (SRM) Subject 757 SRM 51-10-02 , 757-200CB SRM 51-10-02,
757-200PF SRM 51-10-02 , 757-300 SRM 51-10-02
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
17 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 18

e. Boeing Standard Wiring Practices Manual (SWPM) SWPM 20-10-11, SWPM 20-10-12 , SWPM
20-10-19
f. 757 Nondestructive Test (NDT) Manual D634N301, 757 NDT, Part 4, 57-20-01
g. Boeing Service Bulletins 757-54-0034 and 757-54-0035
h. FAA Airworthiness Directive AD 2003-18-05 , AD 2004-12-07
i. Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM
2009-NM-135-AD
j. Boeing Parts Standards Document D590
k. Boeing Drawing 65-88700
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
PANEL INSTL - DRY BAY BARRIER, WING112N8001
This drawing was used to prepare this service bulletin. This drawing is not necessary to make the
specified changes, and is not supplied with this service bulletin. This drawing may not be applicable
to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
757 NDT, Part 4, 57-20-01757 NDT Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
18 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 19

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection procedures given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
None.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
19 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 20

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
20 of 29
BOEING SERVICE BULLETIN 757-57-0065
BLANK PAGE

### Page 21

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
6. The necessary conditions for selection of clamp type and size are included in SWPM
20-10-12. If any wire bundle support clamp specified in this service bulletin does not
make a correct fit on the wire bundle, refer to SWPM 20-10-12 as an accepted
procedure to select a clamp that fits correctly.
7. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
8. A Special Detailed Inspection is defined as: An intensive examination of a specific
item, installation, or assembly to detect damage, failure, or irregularity. The
examination is likely to make extensive use of specialized Inspection techniques
and/or equipment. Intricate cleaning and substantial access or disassembly procedure
may be required.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
21 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 22

9. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
10. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "as
given in" are included in the instruction, the procedure in the Boeing document must
be used.
11. Boeing Service Letter 757-SL-51-022, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
12. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
13. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
14. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
The removed part can be discarded if a new or serviceable part is installed.
15. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
16. Some Boeing parts are supplied in a temporary configuration. Those parts are
identified with a 'U', 'W', or 'Y' in place of the '-' (dash) in the part number. It is
permitted to install parts identified with a 'U', 'W', or 'Y' as an alternative to the '-'
(dash) part number. Boeing Drawing 005W0900 contains more data.
B. WORK INSTRUCTIONS
1. Gain access to the lower side of the wing main fuel tanks between WS 285.65 and WS 313.50 on
both the left and right sides of the plane.
2. De-fuel the wing main fuel tanks. Refer to 757 AMM 28-26-00 as an accepted procedure.
3. Drain / Purge the tanks. Refer to 757 AMM 28-11-00 as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
22 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 23

4. Remove the access panels, as necessary, as given in Figure 1 to gain access to the front spar
lower chord.
a. Clean the inspection area. Refer to 757 NDT Part 4, 57-20-01 section 3., as an acceptable
procedure.
5. Perform the inspection as given in Figure 2 and Figure 3 and Section 1.E. Compliance of this
service bulletin. Use the view that matches your support fitting.
a. If corrosion or any crack is found contact Boeing for additional repair instructions.
b. If you do not find corrosion or any crack you may restore the airplane.
6. Touch-up the sealant and finish on the transducer inspection surfaces if/as required
7. Install the access panels as given in Figure 1.
8. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1: August 01, 2011
23 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 24 (OCR)

BOEING SERVICE BULLETIN 757-57-0065
WSTA
285.65
WSTA
313.5
MAIN
FUEL
TANK
14 MAIN TANK
ACCESS DOOR,
641CB, 541CB
DRY
BAY
WS
292
23 DRY BAY
ACCESS DOOR,
532HZ, 632HZ
FRONT SPAR  INBD
LOWER CHORD  SIDE
FWD <
LINK
SUPPORT
FITTING  LEFT WING SHOWN  U50972
RIGHT WING OPPOSITE
FIGURE 1: GAIN ACCESS TO THE FRONT SPAR LOWER CHORD HORIZONTAL FLANGE
(SHEET 1 OF 2)
Original Issue: May 14, 2009
Revision 1 August 01, 2011  BOEING PROPRIETARY -  757-57-0065
Copyright © Unpublished Work - See page 1 for details.  24 of 29

### Page 25

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to 757 AMM 28-11-01
as an accepted procedure.
(a)
1541CB left sideAccess PanelsRemove1
1641CB right side
Refer to 757 AMM 28-11-07
as an accepted procedure.
1532HZ left sideDrybay PanelsRemove2
1632HZ right side
Refer to757 AMM 28-11-07
as an accepted procedure.
1532HZ left sideDrybay PanelsInstall3
1632HZ right side
Refer to 757 AMM 28-11-01
as an accepted procedure.
1541CB left sideAccess PanelsInstall4
1641CB right side
(a) This AMM procedure may contain additional removals within it, including the removal of panels 434BL
and 444BL.
FIGURE 1: GAIN ACCESS TO THE FRONT SPAR LOWER CHORD HORIZONTAL FLANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1 August 01, 2011
25 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 26 (OCR)

BOEING SERVICE BULLETIN 757-57-0065
WSTA
285.65  FRONT SPAR
WSTA
313.5
100  00.  - MAIN FUEL TANK
WS
SUPPORT FITTING  292
DRY BAY  FRONT
SIDE LINK  SPAR
SUPPORT
FITTING
1 LOWER  CHORI
IN LOWER CHORD  TYPICAL CRACK  →FWD
SIDE LINK  (4 PLACES)
SUPPORT  •INBD
FITTING  757-200 POST 757-54-0034 OR
757-54-0035 CONFIGURATION
WS  IWS
292  292
FRONT
SPAR  FRONT SPAR
SIDE LINK
SUPPORT
FITTING
1 LOWER  CHORD
, FWD
→ FWD  TYPICAL CRACK  LOWER  TYPICAL CRACK IN  'INBD
CHORD  LOWER CHORD
IN LOWER CHORD
• INBD  (3 PLACES)  (4 PLACES)
757-200 PRE 757-54-0034 OR  U51594
757-300 CONFIGURATION  757-54-0035 CONFIGURATION
FIGURE 2: INSPECT LEFT WING FRONT SPAR LOWER CHORD HORIZONTAL FLANGE
(SHEET 1 OF 2)
Original Issue: May 14, 2009
Revision 1 August 01, 2011  BOEING PROPRIETARY -  757-57-0065
Copyright © Unpublished Work - See page 1 for details.  26 of 29

### Page 27

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
As given in 757 NDT, Part
4, 57-20-01 (a)
1Ultrasonic InspectionLower ChordInspect1
The area around the fitting
for corrosion
1General VisualSide Link Sup-
port Fitting
Inspect2
If any crack is found contact Boeing for additional repair instructions.(a)
FIGURE 2: INSPECT LEFT WING FRONT SPAR LOWER CHORD HORIZONTAL FLANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1 August 01, 2011
27 of 29
BOEING SERVICE BULLETIN 757-57-0065

### Page 28 (OCR)

BOEING SERVICE BULLETIN 757-57-0065
WSTA
FRONT SPAR  285.65
WSTA
313.5
MAIN
FUEL
WS  TANK
292  SUPPORT FITTING
FRONT  DRY
SPAR  BAY
\ SIDE LINK
LOWER~  SUPPORT
CHORD  FITTING
TYPICAL CRACK
FWD <  IN LOWER CHORD
(4 PLACES)  SIDE LINK
INBD<  SUPPORT
757-200 POST 757-54-0034 OR  FITTING
757-54-0035 CONFIGURATION
WS  WS
292  292
FRONT
FRONT SPAR
SPAR
SIDE LINK
SUPPORT
FITTING
LOWER 1  CHORD
FWD <
INBD  TYPICAL CRACK  IN LOWER CHORD  LOWER  CHORD  TYPICAL CRACK  FWD <
IN LOWER CHORD
(4 PLACES)  (3 PLACES)  INBD <
757-200 PRE 757-54-0034 OR  U51599
757-54-0035 CONFIGURATION  757-300 CONFIGURATION
FIGURE 3: INSPECT RIGHT WING FRONT SPAR LOWER CHORD HORIZONTAL FLANGE
(SHEET 1 OF 2)
Original Issue: May 14, 2009
Revision 1 August 01, 2011  BOEING PROPRIETARY -  757-57-0065
Copyright © Unpublished Work - See page 1 for details.  28 of 29

### Page 29

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
As given in 757 NDT, Part 4,
57-20-01 (a)
1Ultrasonic InspectionLower ChordInspect1
The area around the fitting for
corrosion
1General VisualSide Link Sup-
port Fitting
Inspect2
If any crack is found contact Boeing for additional repair instructions.(a)
FIGURE 3: INSPECT RIGHT WING FRONT SPAR LOWER CHORD HORIZONTAL FLANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 14, 2009
757-57-0065Revision 1 August 01, 2011
29 of 29
BOEING SERVICE BULLETIN 757-57-0065

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
