# Boeing Special Attention Service Bulletin 757-57-0070: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-0483; AD 2010-23-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 757-57-0070](https://openairdocs.org/service-documents/boeing/sb-757-57-0070.md)
- Title as filed: Boeing Service Bulletin
- Pages: 35
- PDF: https://openairdocs.org/files/sha256/49/76/4976e2e72468e66101a0f311b4c75bcbe1cd58b2b8a4c71119dcc042dff7729e
- Page: https://openairdocs.org/service-documents/boeing/sb-757-57-0070/file/4976e2e72468

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-57-0070
Original Issue: January 27, 2010
ATA System: 5741
SUBJECT: WINGS - Leading Edge Lower Panel Assemblies - Drainage Path Change.
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2010 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
1 of 35
4.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
2 of 35
BOEING SERVICE BULLETIN 757-57-0070
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 2
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 3
D. Description .............................................. 1 3
E. Compliance .............................................. 1 3
F. Approval ............................................... 1 3
G. Manpower .............................................. 1 4
H. Weight and Balance Changes .................................... 1 4
I. Electrical Load Data ......................................... 1 5
J. References .............................................. 1 5
1. Existing Data .......................................... 1 5
2. Data supplied with this Service Bulletin ............................ 1 5
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 5
K. Publications Affected ........................................ 1 5
L. Interchangeability and Intermixability of Parts ........................... 1 5
2. MATERIAL INFORMATION ........................................ 1 7
A. Material - Price and Availability ................................... 1 7
B. Industry Support Information .................................... 1 7
C. Parts Necessary For Each Airplane ................................. 1 7
1. Kits/Parts ............................................ 1 7
2. Parts and Materials Supplied by the Operator ........................ 1 7
3. Parts Modified and Reidentified ................................ 1 8
4. Parts Removed and Not Replaced .............................. 1 8
D. Parts Necessary to Change Spares ................................. 1 8
E. Special Tooling - Price and Availability ............................... 1 8
F. Special Tooling Necessary to do this Service Bulletin ....................... 1 8
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 9
A. GENERAL INFORMATION ..................................... 1 9
B. WORK INSTRUCTIONS ....................................... 2 0
FIGURE 1: BENCH WORK - LOWER FIXED LEADING EDGE PANEL ASSEMBLY CHANGE - SLAT NO.
4 ................................................. 2 2
FIGURE 2: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND
ADJACENT RIBS - SLAT NO. 4 ................................ 2 4
FIGURE 3: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND
ADJACENT RIBS - SLAT NO. 4 ................................ 2 7
FIGURE 4: BENCH WORK - LOWER FIXED LEADING EDGE PANEL ASSEMBLY CHANGE - SLAT NO.
7 ................................................. 2 9
FIGURE 5: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND
ADJACENT RIBS - SLAT NO. 7 ................................ 3 1
FIGURE 6: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND
ADJACENT RIBS - SLAT NO. 7 ................................ 3 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
3 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
4 of 35
BOEING SERVICE BULLETIN 757-57-0070
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-57-0070Original Issue: January 27, 2010
ATA System: 5741
SUBJECT: WINGS - Leading Edge Lower Panel Assemblies - Drainage Path Change.
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
757 airplanes in service have drain holes and unsealed panel assemblies in the fixed leading edge (LE) adjacent
to the inboard end of slats 4 and 7 that are too close to the hot portion of the engines. A design change adds a
new drain hole at outboard slat station (OSS) 344.500 and seals ribs adjacent to the new drain hole. Doing this
change will create new drain paths to direct fluid drainage from the adjacent track housings safely away from
the hot portion of the engines. If not corrected, drainage path too close to the hot portion of the engines could
possibly result in fire in case of fuel leakage from the slat track housings.
ACTION (PRR 54530-289RS)
This service bulletin provides instructions to makes changes to the lower fixed leading edge (LE) panel assemblies,
immediately outboard of the nacelles, as follows:
1. Makes new reinforced drain hole at outboard slat station (OSS) 344.50.
2. Seals the ribs adjacent to the new drain hole.
EFFECTIVITY
All 757 Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 60 months after the original
issue date of this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
5 of 35

### Page 6

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the changes given in this service bulletin.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
8.508.50757
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
6 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 7 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
SLAT NO.7
an I
SLAT NO.4
OSS
343.20 OSS
345.80
SLAT NO.4 SHOWN
SLAT NO.7 OPPSITE
DRAINAGE PATH CHANGE:
1. MAKES NEW REINFORCED DRAIN HOLE
2. SEALS THE RIBS ADJACENT TO NEW DRAIN HOLE
1855721
Original Issue: January 27, 2010
757-57-0070
Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  7 of 35

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
8 of 35
BOEING SERVICE BULLETIN 757-57-0070
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-57-0070
Original Issue: January 27, 2010
ATA System: 5741
SUBJECT: WINGS - Leading Edge Lower Panel Assemblies - Drainage Path Change.
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below. Refer to PRR 54530-289RS for data about
this change.
Refer to Service Bulletin Index Document D624N001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
Drain Path Change - Inboard end of slat No. 4 and slat No. 7.-1
Airplane Models:
757-200, 757-200CB, 757-200PF, 757-300
GroupVariable Number
1NA001 - NA028
1NA191 - NA199
1NA201 - NA239
1NA301 - NA305
1NA341 - NA352
1NA391 - NA399
1NA401 - NA408
1NA441 - NA447
1NA501 - NA586
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
9 of 35

### Page 10

GroupVariable Number
1NB001 - NB004
1NB021 - NB023
1NB036 - NB041
1NB051 - NB053
1NB061 - NB073
1NB079
1NB131 - NB148
1NB161 - NB162
1NB166 - NB168
1NB201 - NB204
1NB221 - NB228
1NB230
1NB236
1NB239
1NB261 - NB267
1NB291 - NB299
1NB301 - NB302
1NB311 - NB312
1NB321 - NB331
1NB421 - NB438
1NB446
1NB451 - NB454
1NB501 - NB523
1NB561
1NB571
1NB581 - NB583
1NC001 - NC033
1NC041 - NC042
1NC051 - NC052
1NC056 - NC062
1NC066 - NC084
1NC091 - NC094
1NC151
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
10 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 11

GroupVariable Number
1NC161
1NC901 - NC951
1NC971 - NC974
1ND001 - ND007
1ND011 - ND059
1ND111 - ND113
1ND161 - ND199
1ND201 - ND203
1ND221 - ND225
1ND241 - ND248
1ND301 - ND322
1ND401
1ND891
1ND895
1NE001 - NE008
1NE011 - NE088
1NE091 - NE094
1NE141 - NE150
1NE161 - NE177
1NE201 - NE204
1NE301 - NE302
1NE311 - NE325
1NJ001 - NJ004
1NJ031 - NJ032
1NJ551 - NJ555
1NL001 - NL002
1NL006 - NL017
1NL101 - NL109
1NL141
1NL601 - NL616
1NN001 - NN002
1NN051 - NN052
1NP901 - NP904
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
11 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 12

GroupVariable Number
1NS601 - NS616
1NT001 - NT009
1NT201 - NT202
1NT231 - NT234
1NT237 - NT240
1NT242
1NT245 - NT248
1NT281 - NT289
1NT341 - NT347
1NT351 - NT360
1NT371 - NT373
1NT375 - NT379
1NT381 - NT386
1NT401 - NT409
1NT411 - NT412
1NT426 - NT427
1NT431 - NT432
1NT436 - NT438
1NT441 - NT442
1NT446
1NT701 - NT769
1NT791 - NT796
1NT861 - NT862
1NT881 - NT885
1NT901 - NT916
1NT971 - NT985
1NU031 - NU038
1NU701 - NU705
1NU721 - NU728
1NU731 - NU732
2. Spares Affected
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
12 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 13

B. Concurrent Requirements
None.
C. Reason
757 airplanes in service have drain holes and unsealed panel assemblies in the fixed leading edge
(LE) adjacent to the inboard end of slats 4 and 7 that are too close to the hot portion of the engines. A
design change adds a new drain hole at outboard slat station (OSS) 344.500 and seals ribs adjacent
to the new drain hole. Doing this change will create new drain paths to direct fluid drainage from the
adjacent track housings safely away from the hot portion of the engines. If not corrected, drainage path
too close to the hot portion of the engines could possibly result in fire in case of fuel leakage from the
slat track housings.
D. Description
This service bulletin provides instructions to makes changes to the lower fixed leading edge (LE) panel
assemblies, immediately outboard of the nacelles at slat 4 and slat 7, as follows:
1. Makes new reinforced drain hole at outboard slat station (OSS) 344.50.
2. Seals the ribs adjacent to the new drain hole.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
522, 622757-200, 757-200CB, 757-
200PF, 757-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 60 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
13 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 14

G. Manpower
The tables below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Work Package 1 - Left Wing - Slat No. 4
Elapsed HoursTask HoursNumber of PersonsTask
0.750.751Remove panel as-
sembly
0.750.751Figure 1
0.250.251Clean Panel
1.001.001Figure 2
0.750.751Figure 3
0.750.751Install panel assem-
bly
4.254.25TOTAL FOR EACH AIRPLANE
Work Package 2 - Right Wing - Slat No. 7
Elapsed HoursTask HoursNumber of PersonsTask
0.750.751Remove panel as-
sembly
0.750.751Figure 4
0.250.251Clean Panel
1.001.001Figure 5
0.750.751Figure 6
0.750.751Install panel assem-
bly
4.254.25TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
14 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 15

I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 54530-289RS.
b. Standard Overhaul Practices Manual (SOPM) 20-50-10, 20-50-19.
c. 757 Aircraft Maintenance Manual (AMM) 06-44-00, 57-41-01.
d. Service Bulletin Index Document D624N001 Part 3.
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
Panel Assembly - Lower114N2202
OSS 333.00 - OSS 365.0 Outboard Wing Leading Edge.
Sealant Installation - Leading Edge, Wing110N3456
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
57-41757 Maintenance Manual
57-41757 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated this service bulletin for effects on Fatigue Critical Structure (FCS) and for
changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This
service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
15 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 16

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
16 of 35
BOEING SERVICE BULLETIN 757-57-0070
BLANK PAGE

### Page 17

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number/ Specification
(a) or (d)SEALANT1 PtBMS5-95 TYPE 1, CLASS B
(PRO-SEAL 870 B-1/2 OR B-2
optional)
WASHER2NAS11490632J
(b) or (d)PRIMER, CORROSION RESIS-
TANT
1 PtBMS10-79 TYPE 3, CLASS A,
GRADE A
(b) or (d)PAINT, PROTECTIVE ENAMEL1 PtBMS10-60 TYPE 1, CLASS A,
GRADE A
(a) or (d)SEALANT1 PtBMS5-45 CLASS B (PR-1776M
B-1/2 OR B-2 optional)
(c) or (d)PARTING AGENT1 PtFREKOTE 710-NC
CAGE:PRC-Desoto International, IncorporatedCan be purchased from:(a)
83574Application Support Center - Los Angeles
24811 Avenue Rockefeller
Valencia, CA. 91355-3468
85570PRC-Desoto International, Incorporated.Can be purchased from:(b)
11601 United Street
Mojave, CA 93501
1JB33The Dexter CorporationCan be purchased from:(c)
HYSOL Division
1 Dexter Drive,
Seabrook, New Hamshire 03874
(d) See the Qualified Product Lists at the end of the Boeing Material Specification (BMS) for
supplier data.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
17 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 18

3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
NotesNew Part NumberNameQTYExisting Part
Number
114N2202-27PANEL ASSEMBLY, LOWER1114N2202-XX
114N2202-28PANEL ASSEMBLY, LOWER1114N2202-YY
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
18 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 19

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are in 757 SRM, Chapter 51
– Torque limits to tighten nuts and bolts are in 757 SRM, Chapter 51
6. Use the approved fastener and process material substitutions in accordance with
757 SRM, Chapter 51. Alternate fasteners are listed in 757 SRM Chapter 51 and
Boeing Drawing 65-88700.
7. If the length of any fastener specified in this service bulletin does not meet the
installation standards in SRM Chapter 51, then a fastener of the same specification,
or an approved substitute, with a length which meets the installation standards in
SRM Chapter 51 may be used.
8. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
9. The dashed letters "-XX" or "-YY" after a part number means any existing dashed
numbered part as removed from the airplane.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
19 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 20

B. WORK INSTRUCTIONS
Work Package 1 - Left Wing - Slat Number 4 - Lower Fixed Leading Edge Panel Assembly Change
1. Remove and keep the lower fixed leading edge panel assembly 114N2202-XX. Refer to 757 AMM
57-41-01 as an accepted procedure.
2. Drill new drain hole and bond washer in accordance with FIGURE 1.
3. Clean lower fixed leading edge panel assembly 114N2202-27 and Ribs at OSS 343.2 and 345.8
and prepare for sealing. Refer to SOPM 20-50-19 as an accepted procedure.
4. Apply sealant to rib areas at OSS 343.2 and 345.8 as given in FIGURE 2. Refer to SOPM 20-50-19
as an accepted procedure.
5. Install the changed lower fixed leading edge panel assembly 114N2202-27. Refer to 757 AMM
57-41-01 as an accepted procedure.
NOTE: Make sure the sealant applied in FIGURE 2 is cured before installing the panel assembly.
6. Apply sealant to areas common to the lower fixed leading edge panel assembly and adjacent ribs
at OSS 343.2 in accordance with FIGURE 3. Refer to SOPM 20-50-19 as an accepted procedure.
a. Do not cover drain hole with sealant.
b. Do not cover drain path under rib at OSS 345.80 with sealant
7. Put the airplane back to a serviceable condition.
Work Package 2 - Right Wing - Slat Number 7 - Lower Fixed Leading Edge Panel Assembly
Change
1. Remove and keep the lower fixed leading edge panel assembly 114N2202-YY. Refer to 757 AMM
57-41-01 as an accepted procedure.
2. Drill new drain hole and bond washer in accordance with FIGURE 4.
3. Clean lower fixed leading edge panel assembly 114N2202-28 and Ribs at OSS 343.2 and 345.8
and prepare for sealing. Refer to SOPM 20-50-19 as an accepted procedure.
4. Apply sealant to rib areas at OSS 343.2 and 345.8 as given in FIGURE 5. Refer to SOPM 20-50-19
as an accepted procedure.
5. Install the changed lower fixed leading edge panel assembly 114N2202-28. Refer to 757 AMM
57-41-01 as an accepted procedure.
NOTE: Make sure the sealant applied in FIGURE 5 is cured before installing the panel assembly.
6. Apply sealant to areas common to the lower fixed leading edge panel assembly and adjacent ribs
at OSS 343.2 in accordance with FIGURE 6. Refer to SOPM 20-50-19 as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
20 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 21

a. Do not cover drain hole with sealant.
b. Do not cover drain path under rib at OSS 345.80 with sealant
7. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
21 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 22 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
SLAT NO.4
B-B
OSS  OSS  OSS  OSS
365.00  356.50  344.50  333.00
3.00+0.06
3.04+0.06
+0.016
0.390  DIA
CL FRONT  -0.000
SPAR TRACE  1857471
A-A
FIGURE 1: BENCH WORK - LOWER FIXED LEADING EDGE PANEL ASSEMBLY CHANGE - SLAT NO. 4
(SHEET 1 OF 2)
Original issue: January 27, 2010
BOEING PROPRIETARY -  757-57-0070
Copyright © Unpublished Work - See page 1 for details.  22 of 35

### Page 23

The step numbers shown below agree with the numbers show in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-XX is any dash part
number.
1114N2202-XXPANEL ASSEMBLY,
LOWER
Drill1
Apply sealant on
faying surfaces be-
tween panel assem-
bly and washer. (a)
-BMS5-95 TYPE 1,
CLASS B (PRO-SEAL
870 B-1/2 OR B-2 op-
tional)
SEALANTApply2
Bond washer to
panel assembly us-
ing BMS-95 Type 1,
class B.
1NAS11490632JWASHERInstall (New)3
Fillet seal edges of
washer. (a)
-BMS5-95 TYPE 1,
CLASS B (PRO-SEAL
870 B-1/2 OR B-2 op-
tional)
SEALANTApply4
Touch up as re-
quired. Refer to
SOPM 20-44-04 as
an accepted proce-
dure.
-BMS10-79 TYPE 3,
CLASS A, GRADE A
PRIMER, CORROSION
RESISTANT
Apply5
Touch up as re-
quired. Refer to
SOPM 20-44-04 as
an accepted proce-
dure.
-BMS10-60 TYPE 1,
CLASS A, GRADE A
PAINT, PROTECTIVE
ENAMEL
Apply
Part mark panel as-
sembly as
114N2202-27. Refer
to SOPM 20-50-10
as an accepted pro-
cedure. (b)
1114N2202-27PANEL ASSEMBLY,
LOWER
Identify6
Apply parting agent
to the lower fixed
L.E. panel assembly
at areas that require
fillet seal common to
the slat rib.
-FREKOTE 710-NCPARTING AGENTApply7
(a) Use as required.
(b) Location of part mark is optional, make sure you can see the part number after the panel assembly is in-
stalled.
FIGURE 1: BENCH WORK - LOWER FIXED LEADING EDGE PANEL ASSEMBLY CHANGE - SLAT NO. 4
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
23 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 24 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
10
SLAT NO.4
OSS
OSS  345.80
343.20
STRAP
1856185
FIGURE 2: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 4
(SHEET 1 OF 3)
Original Issue: January 27, 2010
BOEING PROPRIETARY -  757-57-0070
Copyright © Unpublished Work - See page 1 for details.  24 of 35

### Page 25 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
OSS
343.20
OSS
345.80
1857823
FIGURE 2: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 4
(SHEET 2 OF 3)
Original Issue: January 27, 2010
757-57-0070
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  25 of 35

### Page 26

The step numbers shown below agree with the numbers show in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (c)-BMS5-95 TYPE 1,
CLASS B (PRO-SEAL
870 B-1/2 OR B-2 op-
tional)
SEALANTApply1
Fillet seal in areas
as shown.
-BMS5-45 CLASS B
(PR-1776M B-1/2 OR
B-2 optional)
SEALANTApply2
(b) (c)-BMS5-45 CLASS B
(PR-1776M B-1/2 OR
B-2 optional)
SEALANTApply3
(d)--DRAIN PATHMake4
(a) Inject sealant into cavity from one side until sealant extrudes at the other end(s) of the cavity.
(b) Formed-in-place sealant-fill pocket with BMS 5-45 to form pool approximately as shown. Fill to 0.6 plus
0.4 minus 0.1 inch depth at lowest point, extend pool outboard and forward as shown. Fair and shape
surface to channel fluids toward drain. Smooth fillet edges of pool to structure.
(c) Make sure the sealant is flush in areas that mate with the removeable panel assembly and the sealant
will not interfere with the installation of the panel assembly.
(d) Make a drain path under the fixed leading edge rib at OSS 345.80 by making sure there is no sealant in
the space between rib and splice strap.
FIGURE 2: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 4
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
26 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 27 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
OSS
343.20
OSS
345.80
SLAT NO.4
OSS
343.20
(3)  1856232
FIGURE 3: SEALANTINSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 4
(SHEET 1 OF 2)
Original Issue: January 27, 2010
757-57-0070
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  27 of 35

### Page 28

he step numbers shown below agree with the numbers show in the circle symbols in the figure. The QTY numbers
shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Not shown in figure.
Remove and keep
522DB access cov-
er. Refer to 757
AMM 06-44-00 as
an accepted proce-
dure.
1114N4078-24ACCESS COVERRemove / Keep1
Make sure parting
agent has been ap-
plied to the panel
assembly in areas
common to the ribs
for fillet seal.
-FREKOTE 710-NCPARTING AGENTInspect2
Fillet seal in areas
as shown.
-BMS5-45 CLASS B
(PR-1776M B-1/2 OR
B-2 optional)
SEALANTApply3
Not shown in figure.
Install kept 522DB
access cover. Refer
to 757 AMM 06-44-
00 as an accepted
procedure.
1114N4078-24ACCESS COVERInstall (Kept)4
FIGURE 3: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 4
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
28 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 29 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
3 5
SLAT NO.7
B-B
SSO  OSS  OSS  OSS
344.50  356.50  365.00
+
+ 7
3.00+0.06
3.04+0.06
0.390 +0.016 DIA  -0.000  CL FRONT  SPAR TRACE  1857480
A-A
FIGURE 4: BENCH WORK - LOWER FIXED LEADING EDGE PANEL ASSEMBLY CHANGE - SLAT NO. 7
(SHEET 1 OF 2)
Original issue: January 27, 2010
BOEING PROPRIETARY -  757-57-0070
Copyright © Unpublished Work - See page 1 for details.  29 of 35

### Page 30

The step numbers shown below agree with the numbers show in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-YY is any dash part
number.
1114N2202-YYPANEL ASSEMBLY,
LOWER
Drill1
Apply sealant on
faying surfaces be-
tween panel assem-
bly and washer. (a)
-BMS5-95 TYPE 1,
CLASS B (PRO-SEAL
870 B-1/2 OR B-2 op-
tional)
SEALANTApply2
Bond washer to
panel assembly us-
ing BMS-95 Type 1,
class B.
1NAS11490632JWASHERInstall (New)3
Fillet seal edges of
washer. Refer to
SOPM 20-50-19 as
an accepted proce-
dure.
-BMS5-95 TYPE 1,
CLASS B (PRO-SEAL
870 B-1/2 OR B-2 op-
tional)
SEALANTApply4
Touch up as re-
quired. Refer to
SOPM 20-44-04 as
an accepted proce-
dure.
-BMS10-79 TYPE 3,
CLASS A, GRADE A
PRIMER, CORROSION
RESISTANT
Apply5
Touch up as re-
quired. Refer to
SOPM 20-44-04 as
an accepted proce-
dure.
-BMS10-60 TYPE 1,
CLASS A, GRADE A
PAINT, PROTECTIVE
ENAMEL
Apply
Mark panel assem-
bly as 114N2202-28.
Refer to SOPM 20-
50-10 as an accept-
ed procedure. (b)
1114N2202-28PANEL ASSEMBLY,
LOWER
Identify6
Apply parting agent
to the lower fixed
L.E. panel assembly
at areas that require
fillet seal common to
the slat rib.
-FREKOTE 710-NCPARTING AGENTApply7
(a) Use as required.
(b) Location of part mark is optional, make sure you can see the part number after the panel assembly is in-
stalled.
FIGURE 4: BENCH WORK - LOWER FIXED LEADING EDGE PANEL ASSEMBLY CHANGE - SLAT NO. 7
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
30 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 31 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
SLAT NO.7
SSO
OSS
343.20
Lavo
•SPLICE
STRAP
1856237
FIGURE 5: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 7
(SHEET 1 OF 3)
Original Issue: January 27, 2010
BOEING PROPRIETARY -  757-57-0070
Copyright © Unpublished Work - See page 1 for details.  31 of 35

### Page 32 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
OSS
343.20
OSS
345.80
INBD
1857984
FIGURE 5: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 7
(SHEET 2 OF 3)
Original Issue: January 27, 2010
BOEING PROPRIETARY -  757-57-0070
Copyright © Unpublished Work - See page 1 for details.  32 of 35

### Page 33

The step numbers shown below agree with the numbers show in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (c)-BMS5-95 TYPE 1,
CLASS B (PRO-SEAL
870 B-1/2 OR B-2 op-
tional)
SEALANTApply1
Fillet seal in areas
as shown.
-BMS5-45 CLASS B
(PR-1776M B-1/2 OR
B-2 optional)
SEALANTApply2
(b) (c)-BMS5-45 CLASS B
(PR-1776M B-1/2 OR
B-2 optional)
SEALANTApply3
(d)--DRAIN PATHMake4
(a) Inject sealant into cavity from one side until sealant extrudes at the other end(s) of the cavity.
(b) Formed-in-place sealant-fill pocket with BMS5-45 to form pool approximately as shown. Fill to 0.6 plus
0.4 minus 0.1 inch depth at lowest point, extend pool outboard and forward as shown. Fair and shape
surface to channel fluids toward drain. Smooth fillet edges of pool to structure.
(c) Make sure the sealant is flush in areas that mate with the removeable panel assembly and the sealant
will not interfere with the installation of the panel assembly.
(d) Make a drain path under the fixed leading edge rib at OSS 345.80 by making sure there is no sealant in
the space between rib and splice strap.
FIGURE 5: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 7
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
33 of 35
BOEING SERVICE BULLETIN 757-57-0070

### Page 34 (OCR)

BOEING SERVICE BULLETIN 757-57-0070
OSS
343.20
Oss
345.80
SLAT NO.7
OSS
343.20
1856238
FIGURE 6: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 7
(SHEET 1 OF 2)
Original Issue: January 27, 2010
BOEING PROPRIETARY -  757-57-0070
Copyright © Unpublished Work - See page 1 for details.  34 of 35

### Page 35

The step numbers shown below agree with the numbers show in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Not shown in figure.
Remove and keep
622DB access cov-
er. Refer to 757
AMM 06-44-00 as
an accepted proce-
dure.
1114N4078-24ACCESS COVERRemove / Keep1
Make sure parting
agent has been ap-
plied to the panel
assembly in areas
common to the ribs
for fillet seal.
-FREKOTE 710-NCPARTING AGENTInspect2
Fillet seal in areas
as shown.
-BMS5-45 CLASS B
(PR-1776M B-1/2 OR
B-2 optional)
SEALANTApply3
Not shown in figure.
Install kept 622DB
access cover. Refer
to 757 AMM 06-44-
00 as an accepted
procedure.
1114N4078-24ACCESS COVERInstall (Kept)4
FIGURE 6: SEALANT INSTALLATION - LOWER FIXED LEADING EDGE PANEL ASSEMBLY AND ADJACENT
RIBS - SLAT NO. 7
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 27, 2010
757-57-0070
35 of 35
BOEING SERVICE BULLETIN 757-57-0070

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
