# Boeing Special Attention Service Bulletin 767-22-0146: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-7525; AD 2016-25-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 767-22-0146](https://openairdocs.org/service-documents/boeing/sb-767-22-0146.md)
- Title as filed: U.S. DOT/FAA - SB-767-22-0146-01
- Pages: 18
- PDF: https://openairdocs.org/files/sha256/7d/5e/7d5e12232d7195672a35367938ce46d49973ce09d6c2cfacfe6daf39cc122fcd
- Page: https://openairdocs.org/service-documents/boeing/sb-767-22-0146/file/7d5e12232d71

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-22-0146
Original Issue: March 24, 2015
Revision 1: June 25, 2015
ATA System: 2210
SUBJECT: AUTOFLIGHT - Autopilot - Flight Control Computer Operational Program Software
Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2015 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
1 of 18
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
2 of 18
BOEING SERVICE BULLETIN 767-22-0146
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 12
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 15
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 16
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
3 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
4 of 18
BOEING SERVICE BULLETIN 767-22-0146
BLANK PAGE

### Page 5

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 767-22-0146Original Issue: March 24, 2015
Revision 1: June 25, 2015
ATA System: 2210
SUBJECT: AUTOFLIGHT - Autopilot - Flight Control Computer Operational Program Software
Change
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to change the compliance time.
These sections were changed:
1. In Service Bulletin Subject, changed the subject.
2. In Summary, Compliance, changed the compliance time.
3. In Paragraph 1.E., Compliance, changed the compliance time.
4. In Paragraph 1.K.1., Publications, updated the Publications Affected table.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
March 24, 2015Original Issue:
June 25, 2015Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
5 of 18

### Page 6

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
6 of 18
BOEING SERVICE BULLETIN 767-22-0146
BLANK PAGE

### Page 7

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 767-22-0146Original Issue: March 24, 2015
Revision 1: June 25, 2015
ATA System: 2210
SUBJECT: AUTOFLIGHT - Autopilot - Flight Control Computer Operational Program Software
Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to install new Operational Program Software (OPS) into the Flight Control
Computers (FCCs). This new software includes a Takeoff Engage Inhibit feature. This feature prevents an
autopilot engagement when the airplane is on the ground with the flaps down. If this change is not done, the
autopilot could be engaged while the airplane is on the ground. The autopilot could then cause stabilizer trim
beyond the greenband limits, which could lead to a high speed rejected takeoff condition.
Boeing Service Related Problem (SRP) 767-SRP-22-0035 is related to this service bulletin.
The related Boeing Service bulletin is SB 767-22-0143.
Boeing Fleet Team Digest (FTD) 767 FTD 22-12001 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
7 of 18

### Page 8

ReferenceAffectedPlanning Data
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR B12901-118S)
Install new OPS software into the FCCs.
EFFECTIVITY
767-300/-300F Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 16 months after the Revision
1 date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of February 02, 2012. Please refer to
Paragraph 2.B., Industry Support Information. The warranty remedies will expire eight years from the original
issue date of this service bulletin.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
1.001.00Group 1
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
8 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 9

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-22-0146
Original Issue: March 24, 2015
Revision 1: June 25, 2015
ATA System: 2210
SUBJECT: AUTOFLIGHT - Autopilot - Flight Control Computer Operational Program Software
Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624T001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
The Variable Numbers and Group Information for the applicable airplanes is given below. An
equivalent change is on subsequent production airplanes. Refer to PRR B12901-118S for data
about this change.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes without Flight Control Computer software part number
2270-COL-AF2-05 (2270COLAF205) installed.
-1
Airplane Models:
767-300, 767-300F
GroupVariable Number
1VS426 - VS428
1VS751 - VS759
1VS861
1VS891
1VS911 - VS912
1VS941
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
9 of 18

### Page 10

GroupVariable Number
1VS976 - VS977
1VT021
1VT031 - VT033
1VT541 - VT546
1VT551 - VT552
1VT556 - VT565
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to install new Operational Program Software (OPS) into the
Flight Control Computers (FCCs). This new software includes a Takeoff Engage Inhibit feature. This
feature prevents an autopilot engagement when the airplane is on the ground with the flaps down. If
this change is not done, the autopilot could be engaged while the airplane is on the ground. The autopilot
could then cause stabilizer trim beyond the greenband limits, which could lead to a high speed rejected
takeoff condition.
Revision 1 is sent to change the compliance time.
Boeing Service Related Problem (SRP) 767-SRP-22-0035 is related to this service bulletin.
The related Boeing Service bulletin is SB 767-22-0143.
Boeing Fleet Team Digest (FTD) 767 FTD 22-12001 is related to this service bulletin.
D. Description
Install new OPS software into the FCCs.
The changes in this service bulletin will not change the Engine Indication and Crew Alerting System
(EICAS).
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
10 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 11

Affected Maintenance Zones
ZoneModel
212767-300, 767-300F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 16 months after the
Revision 1 date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Install Software
1.001.00TOTAL FOR EACH AIRPLANE
This estimate gives general service bulletin incorporation time. The specific software data transfer times
can be found in 767 AMM 20-15-11.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
11 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 12

H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR B12901-118S
b. Boeing Service Related Problem (SRP) 767-SRP-22-0035
c. Service Bulletin Index D624T001
d. 767 Aircraft Maintenance Manual (AMM) 20-15-11, 22-11-01
e. 767 Fleet Team Digest (FTD) 22-12001
f. Boeing Service Bulletin 767-22-0143
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
22-01, 22-11767 Aircraft Maintenance Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
12 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 13

M. Software Accomplishment Summary
1. System affected by this change: Flight Control Computer.
2. Software changes which affect operational procedures: None.
3. Other software improvements: Autopilot engagement inhibited while on-ground, except when flaps
are up.
More data about this change is in Boeing Fleet Team Digest (FTD) 767 FTD 22-12001.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
13 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 14

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
14 of 18
BOEING SERVICE BULLETIN 767-22-0146
BLANK PAGE

### Page 15

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are available for 767 airplanes in warranty as of February 02, 2012. For
task hour and material reimbursement for airplanes in warranty as of that date, send a warranty claim
to Boeing Fleet Support Contracts - Warranty. The warranty remedies will expire eight years from the
original issue date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
NotesSoftware NameSoftware Part NumberMedia Set NameMedia Set Part Number
(a) (b) (c)
(d)
AFDS FCC OPS
OPERATIONAL
PROGRAM
SOFTWARE
2270-COL-AF2-05
(2270COLAF205)
AFDS FCC OPS
DISKSET
831-5321-160 (S241T100-
605)
(a) This software part number is used in production. Operators may already have this media set.
(b) Do not mix different part numbers of this software on the airplane. All Flight Control Computers (FCCs)
must contain the new software.
(c) Do not install previous versions of this software after installation of the new software part number.
(d) The media set can be obtained directly from the supplier: Rockwell Collins, Inc. (0EFD0), 400 Collins
Road NE Cedar Rapids, IA 52498 USA
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
15 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 16

E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
16 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 17

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 767 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 767
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 767
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. Refer to 767 AMM 20-15-11 for on-airplane software installation maintenance
practices and data transfer times, as accepted procedures.
6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
7. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
17 of 18
BOEING SERVICE BULLETIN 767-22-0146

### Page 18

8. Some steps in the Work Instructions are identified as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
identified as RC must be done to comply with the AD. Alternative procedures for
steps not identified with RC can be used if the RC steps can still be done as specified,
and the airplane can be put back in a serviceable condition. An Alternative Method
of Compliance (AMOC) is not necessary for deviations to steps that are not identified
as RC.
B. WORK INSTRUCTIONS
1. RC - Install the Operational Program Software (OPS) given below. Refer to 767 AMM 22-11-01
as an accepted procedure.
Media Set Part NumberSoftware Part NumberSoftware Name
831-5321-160 (S241T100-605)2270-COL-AF2-05
(2270COLAF205)
AFDS FCC OPS OPERATIONAL PRO-
GRAM SOFTWARE
2. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 24, 2015
767-22-0146Revision 1: June 25, 2015
18 of 18
BOEING SERVICE BULLETIN 767-22-0146

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
