# Boeing Special Attention Service Bulletin 767-25-0381: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0856; AD 2013-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 767-25-0381](https://openairdocs.org/service-documents/boeing/sb-767-25-0381.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 130
- PDF: https://openairdocs.org/files/sha256/f5/2d/f52d66a1db3bda7cc3c17de2d4523d07584b373f1dd9e77408306be47858eb37
- Page: https://openairdocs.org/service-documents/boeing/sb-767-25-0381/file/f52d66a1db3b

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-25-0381
Original Issue: August 19, 2010
Revision 1: September 17, 2012
ATA System: 2510 2550
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS
8-39 Urethane Foam Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2010 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
1 of 130
3.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
2 of 130
BOEING SERVICE BULLETIN 767-25-0381
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 2 1
B. Concurrent Requirements ...................................... 2 1
C. Reason ................................................ 2 1
D. Description .............................................. 2 2
E. Compliance .............................................. 2 6
F. Approval ............................................... 2 7
G. Manpower .............................................. 2 7
H. Weight and Balance Changes .................................... 4 0
I. Electrical Load Data ......................................... 4 1
J. References .............................................. 4 1
1. Existing Data: ......................................... 4 1
2. Data supplied with this Service Bulletin: ........................... 4 1
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 4 1
K. Publications Affected ........................................ 4 2
L. Interchangeability and Intermixability of Parts ........................... 4 2
2. MATERIAL INFORMATION ........................................ 4 3
A. Material - Price and Availability ................................... 4 3
B. Industry Support Information .................................... 4 6
C. Parts Necessary For Each Airplane ................................. 4 6
1. Kits/Parts: ........................................... 4 6
2. Parts and Materials Supplied by the Operator: ........................ 5 1
3. Parts Modified and Reidentified: ............................... 5 3
4. Parts Removed and Not Replaced: .............................. 5 7
D. Parts Necessary to Change Spares ................................. 5 7
E. Special Tooling - Price and Availability ............................... 5 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 5 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 5 9
A. GENERAL INFORMATION ..................................... 5 9
B. WORK INSTRUCTIONS ....................................... 6 0
FIGURE 1: FORWARD CARGO COMPARTMENT - LEFT SIDE SLOPING SIDEWALL FOAM
REPLACEMENT [Group 1-6, 10-12] ............................. 6 4
FIGURE 2: FORWARD CARGO COMPARTMENT - RIGHT SIDE SLOPING SIDEWALL FOAM
REPLACEMENT [Group 1-6, 10-12] ............................. 6 8
FIGURE 3: FORWARD CARGO COMPARTMENT FLOOR FOAM REPLACEMENT [Group 1-6, 10-12]
.................................................. 7 2
FIGURE 4: AFT CARGO COMPARTMENT - LEFT SIDE SLOPING SIDEWALL FOAM REPLACEMENT
[Group 1-6, 10-12] ....................................... 7 6
FIGURE 5: AFT CARGO COMPARTMENT - RIGHT SIDE SLOPING SIDEWALL FOAM REPLACEMENT
[Group 1-6, 10-12] ....................................... 8 0
FIGURE 6: AFT CARGO COMPARTMENT FLOOR FOAM REPLACEMENT [Group 1-6, 10-12] . . . 84
FIGURE 7: TAPE INSTALLATION AT LEFT SIDE OF STATION 742 [Group 1, 3-4, 7, 11-12] ..... 8 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
3 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 4

FIGURE 8: TAPE INSTALLATION AT RIGHT SIDE OF STATION 742 [Group 1, 3-4, 7, 11-12] .... 9 1
FIGURE 9: P11 PILOT OVERHEAD PANEL ACCESS [Group 1-4, 10-12] ............... 9 4
FIGURE 10: P11 PILOT OVERHEAD PANEL FOAM REPLACEMENT [Group 1-4, 10-12] ....... 9 6
FIGURE 11: REIDENTIFICATION OF PILOTS CIRCUIT BREAKER P11 PANEL ASSEMBLY [Group 1,
Configuration 3; Group 2-4, 10-12, Configuration 2] ..................... 1 0 4
FIGURE 12: REIDENTIFICATION OF PILOTS CIRCUIT BREAKER P11 PANEL ASSEMBLY [Group 1,
Configuration 1; Group 2-3, 10, 12, Configuration 2] .................... 1 0 6
FIGURE 13: REIDENTIFICATION OF PILOTS CIRCUIT BREAKER P11 PANEL ASSEMBLY [Group 1,
Configuration 2; Group 2-4, 10-12, Configuration 1] ..................... 1 0 8
FIGURE 14: PUT P11 PILOT OVERHEAD PANEL BACK TO A SERVICEABLE CONDITION [Group 1-4,
10-12] ............................................. 1 1 0
FIGURE 15: OVERWING ESCAPE HATCH ( 4 ) CORNER SEAL REPLACEMENT [Group 3, 6, 9, 11] . 112
FIGURE 16: OVERWING ESCAPE HATCH ( 2 ) CORNER SEAL REPLACEMENT [Group 2, 5, 8, 10] . 114
FIGURE 17: FOAM PAD REMOVAL [Group 1-3, 12] ........................... 1 1 6
FIGURE 18: FELT INSTALLATION [Group 1-3, 12] ............................ 1 2 1
Appendix A: SANDING AND SCOURING (BAC 5748, TYPE II, CLASS 5) ............... 1 2 6
Appendix B: BMS8-39 URETHANE FOAM REPLACEMENT EXCLUDE AREAS/APPLICATIONS . . 128
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
4 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 5

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 767-25-0381Original Issue: August 19, 2010
Revision 1: September 17, 2012
ATA System: 2510 2550
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS
8-39 Urethane Foam Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on the airplane(s) changed in accordance with the original issue of this service
bulletin.
REASON FOR REVISION
This revision is sent to make changes to the group configurations in the service bulletin, Boeing Converted
Freighter (BCF) airplanes VN191-VN197 have beeen moved from Group 3 to a new Group 12 . In addition, the
BMS 5-157 standard has been revised.
These sections were changed:
1. In Summary/Action and Paragraph 1.D., Description; added new instructions for Groups 4, 5, 10 and Group
12 airplanes.
2. In Paragraph 1.A.1., Airplanes; changed Group 2 and Group 3 descriptions. Added Group 12 airplanes.
3. In Summary/Manpower and Paragraph 1.G., Manpower; changed manpower estimates. Added Group 12
airplanes.
4. In Paragraph 2.A., Material - Price and Availability; changed Unit Price for Group 5, Group 8 and Group 10
airplanes. Added Group 12 applicability.
5. In Paragraph 2.A.2., Parts and Materials Supplied by the Operator; changed BMS 5-157 Part
Number/Specification. In addition, added BMS 5-157 Part Number/Specification as an optional to BMS
5-149. Added Group 12 applicability.
6. In Paragraph 2.A.3, Parts Modified and Reidentified; changed Group Configurations. Added Group 12
applicability.
7. In Paragraph 3.B., Work Instructions; changed Group Configurations at step 18; Group 4 added.
8. In Paragraph 3.B., Work Instructions; changed Group Configurations at step 19; Group 2-3, 10, Configuration
2 added.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
5 of 130

### Page 6

9. In Paragraph 3.B., Work Instructions; added Group 12 Configurations.
10. In FIGURE 1 to FIGURE 6; added BMS 5-157 Part Number/Specification as an optional to BMS 5-149.
11. In FIGURE 1 to 14 and FIGURE 17 to 18; changed Group Configurations.
12. In FIGURE 17; changed BMS 5-157 Part Number/Specification.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
August 19, 2010Original Issue:
September 17, 2012Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
6 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 7

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 767-25-0381Original Issue: August 19, 2010
Revision 1: September 17, 2012
ATA System: 2510 2550
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS
8-39 Urethane Foam Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This change replaces seals in the cargo compartments that degrade over time and no longer satisfy the
requirements for flammability, smoke and Halon retention and fire blocking. If you do not make the change as
given in this service bulletin, the degraded material can be an unacceptable fuel source for a fire if exposed to
an ignition source. The degraded material will also compromise Halon and smoke retention and fire blocking,
which could result in the inability to keep sufficient Halon concentrations within the cargo compartment.
The seals are made of BMS 8-39 Urethane foam. BMS 8-39 foam fire retardants are mixed into, but are not
chemically connected with, the remaining components of the foam. This condition will cause the fire retardants
to have decreased effectiveness of fire resistance over time.
Some operators reported the BMS 8-39 Urethane foam burned at some areas in service. Boeing found that the
self-extinguishing and physical properties of the BMS 8-39 Urethane foam can degrade after five to ten years.
The degraded material can be an unacceptable fire fuel source for a fire if exposed to an ignition source. The
degraded material will also compromise Halon and smoke retention and fire blocking, which could result in the
inability to keep sufficient Halon concentrations within the cargo compartment.
This change replaces BMS 8-39 urethane foam in areas of the airplane where it is not easy to access for fire
and smoke detection or suppression. It is also replaced in areas where it is used to prevent fire or smoke
penetration. It is not replaced in areas where it is encapsulated by a protective fire resistant barrier or where it
is physically isolated from an ignition source. The BMS 8-39 foam is replaced with either BMS8-371 insulation
foam or BMS 1-68 silicone foam rubber. The selection of either BMS8-371 or BMS 1-68 material will be based
on requirements for use and its location in the airplane.
Boeing Service Related Problem (SRP) 767-SRP-25-0234 is related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
7 of 130

### Page 8

ACTION (PRR B12901-95S)
Group 1:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo
compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 2:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
4. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
5. Replace over wing escape hatch corner seals.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 3:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape In the forward cargo
compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
6. Replace over wing escape hatch corner seals.
7. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
8 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 9

Group 4:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo
compartment.
4. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
5. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
Group 5:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Replace over wing escape hatch corner seals.
4. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 6:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo
compartment.
4. Replace over wing escape hatch corner seals.
5. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 7:
1. Remove the sloping sidewalls.
2. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo
compartment.
3. Install the sloping sidewalls.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
9 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 10

Group 8-9:
1. Replace over wing escape hatch corner seals.
Group 10:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
4. Replace over wing escape hatch corner seals.
5. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 11:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo
compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace over wing escape hatch corner seals.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 12:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the
areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual
inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape In the forward cargo
compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
10 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 11

EFFECTIVITY
767-200 -300 -300F and -400ER Airplanes. See Service Bulletin Paragraph 1.A.1 for effectivity.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends incorporation of this service bulletin within six years after the original issue the date on this
service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and change given in this service bulletin.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
34.6373.96GROUP 1
35.8875.21GROUP 2,
CONFIGURA-
TION 1
35.9875.31GROUP 2,
CONFIGURA-
TION 2
36.8876.21GROUP 3,
CONFIGURA-
TION 1
36.9876.31GROUP 3,
CONFIGURA-
TION 2
30.1369.46GROUP 4
23.4056.86GROUP 5
23.3956.86GROUP 6
3.003.00GROUP 7
2.252.25GROUP 8
2.252.25GROUP 9
29.6368.96GROUP 10,
CONFIGURA-
TION 1
29.7369.06GROUP 10,
CONFIGURA-
TION 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
11 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 12 (OCR)

BOEING SERVICE BULLETIN 767-25-0381
Airplanes  Total Task Hours  Elapsed Hours
GROUP 11  71.71  32.38
GROUP 12,  73.96  34.63
CONFIGURA-
TION 1
GROUP 12,  74.06  34.73
CONFIGURA-
TION 2
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
GROUP 1-3 AND 12 AIRPLANES:
REMOVE CROWN AREA FOAM
PADS AND INSTALL NOMEX FELT.
GROUP 1-6 AND 10-12 AIRPLANES:
REPLACE BMS 8-39 FOAM WITH
BMS 1-68 FOAM IN THE FORWARD
AND AFT CARGO COMPARTMENTS.
P11 PANEL  GROUP 2, 3, 5, 6 AND 8-12 AIRPLANES:
AREA  REPLACE OVER THE WING ESCAPE
HATCH CORNER SEALS.
GROUP 1, 3-7 AND 12 AIRPLANES:
COVER THE BMS 8-39 FOAM NEAR
STA 742 FRAME WITH CARGO LINER
JOINT SEALING TAPE IN THE FORWARD
CARGO COMPARTMENT.
GROUP 1-4 AND 10-12 AIRPLANES:
REPLACE BMS 8-39 FOAM
WITH BMS 8-371 FOAM ON  J59509
THE FLIGHT DECK.
Original Issue: August 19, 2010
Revision 1: September 17, 2012  767-25-0381
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  12 of 130

### Page 13

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-25-0381
Original Issue: August 19, 2010
Revision 1: September 17, 2012
ATA System: 2510 2550
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS
8-39 Urethane Foam Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624T001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR B12901-64S and PRR B12901-95RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
767-300, 767-300F AND 767-400ER AIRPLANES BEFORE LINE
NUMBER 936.
-1
767-400ER AIRPLANES WITH PILOTS CIRCUIT BREAKER P11
PANEL ASSEMBLY 233T5216-205.
1
767-300 AND 767-300F AIRPLANES WITH PILOTS CIRCUIT
BREAKER P11 PANEL ASSEMBLY 233T5216-206.
2
767-300, 767-300F AND 767-400ER AIRPLANES WITH PILOTS
CIRCUIT BREAKER P11 PANEL ASSEMBLY OTHER THAN
233T5216-205 AND 233T5216-206.
3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
13 of 130

### Page 14

DESCRIPTIONCONFIGURATIONGROUP
767-200 AIRPLANES BEFORE LINE NUMBER 936 AND 767-300
AIRPLANES WITH 2 OVERWING ESCAPE HATCHES.
-2
767-200 AIRPLANES AND 767-300 AIRPLANES WITH 2
OVERWING ESCAPE HATCHES WITH PILOTS CIRCUIT BREAKER
P11 PANEL ASSEMBLY 233T5216-206.
1
767-200 AIRPLANES AND 767-300 AIRPLANES WITH 2
OVERWING ESCAPE HATCHES WITH PILOTS CIRCUIT BREAKER
P11 PANEL ASSEMBLY OTHER THAN 233T5216-206.
2
767-300 AIRPLANES BEFORE LINE NUMBER 936 WITH 4 OVER
WING ESCAPE HATCHES.
-3
767-300 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY 233T5216-206.
1
767-300 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY OTHER THAN 233T5216-206.
2
767-300F AIRPLANES BEFORE LINE NUMBER 936, 767-300 AND
767-400 AIRPLANES WITH NO OVERWING ESCAPE HATCHES.
-4
767-300F AIRPLANES , 767-300 AND 767-400 AIRPLANES WITH
NO OVERWING ESCAPE HATCHES WITH PILOTS CIRCUIT
BREAKER P11 PANEL ASSEMBLY 233T5216-206.
1
767-300F AIRPLANES , 767-300 AND 767-400 AIRPLANES WITH
NO OVERWING ESCAPE HATCHES WITH PILOTS CIRCUIT
BREAKER P11 PANEL ASSEMBLY OTHER THAN 233T5216-205
AND 233T5216-206.
2
767-200, AIRPLANES AFTER LINE NUMBER 936.-5
767-300 AIRPLANES AFTER LINE NUMBER 936 WITH 4 OVER
WING ESCAPE HATCHES.
-6
767-300F AIRPLANES AFTER LINE NUMBER 936.-7
767-200 AFTER LINE NUMBER 936 THAT HAVE 2 HATCHES AND
NEED ONLY TO REPLACE THE CORNER SEALS.
-8
767-300 AFTER LINE NUMBER 936 THAT HAVE 4 HATCHES AND
NEED ONLY TO REPLACE THE CORNER SEALS.
-9
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
14 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 15

DESCRIPTIONCONFIGURATIONGROUP
767-200 AIRPLANES BEFORE LINE NUMBER 936 THAT HAD
NOMEX FELT INSTALLED IN PRODUCTION.
-10
767-200 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY 233T5216-206.
1
767-200 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY OTHER THAN 233T5216-206.
2
767-300 AIRPLANES BEFORE LINE NUMBER 936 THAT HAD
NOMEX FELT INSTALLED IN PRODUCTION WITH 4 OVER WING
ESCAPE HATCHES.
-11
767-300 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY 233T5216-206.
1
767-300 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY OTHER THAN 233T5216-205 AND 233T5216-206.
2
767-300BCF AIRPLANES BEFORE LINE NUMBER 936.-12
767-300 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY 233T5216-206.
1
767-300 AIRPLANES WITH PILOTS CIRCUIT BREAKER P11 PANEL
ASSEMBLY OTHER THAN 233T5216-206.
2
Airplane Models:
767-200, 767-300, 767-300F, 767-400ER
GroupVariable Number
2VA001 - VA020
2VA301 - VA315
2VA501 - VA530
2VA701 - VA719
2VA801 - VA810
2VB001 - VB002
2VB051 - VB055
2VB101 - VB125
2VB201 - VB202
2VB251 - VB253
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
15 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 16

GroupVariable Number
2VB281 - VB284
2VB301 - VB302
2VB321 - VB332
2VB371 - VB373
2VB401
2VB441 - VB444
2VE001 - VE003
2VE021 - VE023
2VE041 - VE043
2VE061 - VE069
2VE083 - VE086
2VE101 - VE104
2VE116 - VE118
2VE121 - VE126
2VE141 - VE152
2VE171 - VE172
2VF001 - VF002
2VF041 - VF042
2VF051
2VF061 - VF062
2VF071 - VF072
2VF091 - VF093
2VF101 - VF102
2VF161 - VF162
2VF171 - VF172
2VF180 - VF184
2VF251
3VK001 - VK016
3VK021 - VK022
3VK031 - VK056
3VK081 - VK113
1VK131 - VK133
3VK141 - VK148
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
16 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 17

GroupVariable Number
2VK161 - VK164
3VK171
3VK181
3VK186
2VL001 - VL006
2VL011
3VL701 - VL703
2VL751 - VL755
1VL806 - VL807
1VL871 - VL873
1VL891 - VL900
1VL911 - VL914
3VL931 - VL932
3VL941
3VN001 - VN041
3VN051 - VN064
3VN081 - VN099
1VN111 - VN127
1VN130 - VN137
3VN151 - VN158
3VN163 - VN168
2VN171 - VN174
12VN191 - VN197
3VN198
2VN211 - VN212
3VN221 - VN225
2VN231 - VN234
2VN241 - VN243
3VN251 - VN276
3VN291 - VN293
2VN301 - VN314
1VN371 - VN372
1VN376
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
17 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 18

GroupVariable Number
1VN381 - VN388
1VN421
3VN422 - VN427
3VN436
1VN471 - VN472
3VN491 - VN513
1VN531 - VN532
1VN536 - VN537
1VN541 - VN542
1VN546 - VN547
1VN551
1VN556 - VN557
1VN561 - VN562
1VN631 - VN633
2VN634 - VN636
1VN637 - VN638
3VN651 - VN658
3VN671 - VN672
3VN676
3VN681 - VN691
3VN731 - VN732
3VN751 - VN753
2VN791 - VN792
3VN811 - VN813
1VN921 - VN922
3VN931 - VN936
1VN951 - VN953
3VN966 - VN972
1VQ001
4VQ002 - VQ008
1VQ009 - VQ011
4VQ012 - VQ021
1VQ071 - VQ086
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
18 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 19

GroupVariable Number
10VR051 - VR060
10VR081
10VR084
10VR086 - VR087
5VR088
8VR089
10VR106
5VR107
8VR108 - VR109
1VR201 - VR209
4VR210 - VR211
1VR251
1VR256 - VR257
4VR258 - VR260
3VR401
3VR421 - VR423
3VR426
3VR441
3VR461
3VR471 - VR472
1VS051 - VS056
2VS061
3VS066 - VS070
3VS073 - VS078
3VS091 - VS104
3VS111 - VS113
3VS131 - VS133
1VS136 - VS137
3VS176 - VS177
3VS186 - VS187
3VS196 - VS203
3VS206 - VS208
1VS211
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
19 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 20

GroupVariable Number
1VS216 - VS217
3VS231
1VS246 - VS248
1VS261 - VS263
3VS266 - VS274
3VS291 - VS293
3VS301 - VS302
11VS303
1VS306 - VS310
4VS311
1VS316
1VS321 - VS324
4VS331 - VS333
4VS336 - VS337
3VS366 - VS367
3VS381 - VS382
3VS391 - VS392
3VS401
4VS426 - VS428
3VS466 - VS472
3VS486
2VS496 - VS497
2VS506 - VS507
3VS526
3VS546 - VS549
11VS701 - VS713
6VS714 - VS715
9VS716 - VS720
11VS721 - VS732
9VS733 - VS736
11VS751 - VS759
11VS821 - VS825
11VS841 - VS844
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
20 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 21

GroupVariable Number
11VS861
4VS881 - VS883
4VS891
11VS896
6VS901 - VS903
9VS904 - VS910
6VS911
9VS912
9VS921 - VS922
9VS931 - VS933
4VT501
4VT511
7VT512
7VT521 - VT522
10VV001
1VW701 - VW721
1VW851
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This change replaces seals in the cargo compartments that degrade over time and no longer satisfy
the requirements for flammability, smoke and Halon retention and fire blocking. If you do not make the
change as given in this service bulletin, the degraded material can be an unacceptable fuel source for
a fire if exposed to an ignition source. The degraded material will also compromise Halon and smoke
retention and fire blocking, which could result in the inability to keep sufficient Halon concentrations
within the cargo compartment.
The seals are made of BMS 8-39 Urethane foam. BMS 8-39 foam fire retardants are mixed into, but
are not chemically connected with, the remaining components of the foam. This condition will cause
the fire retardants to have decreased effectiveness of fire resistance over time.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
21 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 22

Some operators reported the BMS 8-39 Urethane foam burned at some areas in service. Boeing found
that the self-extinguishing and physical properties of the BMS 8-39 Urethane foam can degrade after
five to ten years. The degraded material can be an unacceptable fire fuel source for a fire if exposed
to an ignition source. The degraded material will also compromise Halon and smoke retention and fire
blocking, which could result in the inability to keep sufficient Halon concentrations within the cargo
compartment.
This change replaces BMS 8-39 urethane foam in areas of the airplane where it is not easy to access
for fire and smoke detection or suppression. It is also replaced in areas where it is used to prevent fire
or smoke penetration. It is not replaced in areas where it is encapsulated by a protective fire resistant
barrier or where it is physically isolated from an ignition source. The BMS 8-39 foam is replaced with
either BMS8-371 insulation foam or BMS 1-68 silicone foam rubber. The selection of either BMS8-371
or BMS 1-68 material will be based on requirements for use and its location in the airplane.
Boeing Service Related Problem (SRP) 767-SRP-25-0234 is related to this service bulletin.
Revision 01 is sent to make changes to the group configurations in the service bulletin. In addition, the
BMS 5-157 Part Number/ Specification has been revised.
D. Description
Group 1:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward
cargo compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 2:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
4. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
5. Replace over wing escape hatch corner seals.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
22 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 23

Group 3:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward
cargo compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
6. Replace over wing escape hatch corner seals.
7. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 4:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape In the forward
cargo compartment.
4. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
5. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
Group 5:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Replace over wing escape hatch corner seals.
4. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
23 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 24

Group 6:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward
cargo compartment.
4. Replace over wing escape hatch corner seals.
5. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 7:
1. Remove the sloping sidewalls.
2. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward
cargo compartment.
3. Install the sloping sidewalls.
Group 8-9:
1. Replace over wing escape hatch corner seals.
Group 10:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
4. Replace over wing escape hatch corner seals.
5. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 11:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward
cargo compartment.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
24 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 25

4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace over wing escape hatch corner seals.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Group 12:
1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access
to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a
general visual inspection for BMS 8-39 foam.
2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.
3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape In the forward
cargo compartment.
4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.
5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.
6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.
Revision 01 - No more work is necessary on airplanes changed in accordance with the original issue
of this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
121, 122, 153, 154, 211, 212, 233, 234, 243,
244, 253, 254
767-300, 767-300F, 767-400ER
Group 2:
Affected Maintenance Zones
ZoneModel
121, 122, 153, 154, 211, 212, 233, 234, 243, 244767-200, 767-300
Group 3, 12:
Affected Maintenance Zones
ZoneModel
121, 122, 153, 154, 211, 212, 233, 234, 243,
244, 253, 254
767-300
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
25 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 26

Group 4:
Affected Maintenance Zones
ZoneModel
121, 122, 153, 154767-300, 767-300F, 767-400ER
Group 5, 8:
Affected Maintenance Zones
ZoneModel
241, 242767-200
Group 6, 9:
Affected Maintenance Zones
ZoneModel
241, 242767-300
Group 7:
Affected Maintenance Zones
ZoneModel
121, 122767-300F
Group 10:
Affected Maintenance Zones
ZoneModel
121, 122, 153, 154, 211, 212, 241, 242767-200
Group 11:
Affected Maintenance Zones
ZoneModel
121, 122, 211, 212, 241, 242767-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
26 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 27

Boeing recommends incorporation of this service bulletin within six years after the original issue date
of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task-hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
NOTE: This service bulletin is not typical because an inspection is required on each airplane
to find the number of locations that must be changed. For this reason, it was not
practical to split the manpower into four hour work packages.
1.
2. This manpower is based on an approximate number of locations where there are
BMS 8-39 foams in the specific area on an airplane. Add or reduce the manpower
when a different number are found by the inspection given in the figure.
Group 1, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
27 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 28

Group 1, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 12
1.001.001FIGURE 14
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
34.6373.96TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 1, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
28 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 29

Group 1, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
5.8811.752FIGURE 10
0.100.101FIGURE 13
1.001.001FIGURE 14
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
34.6373.96TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 1, Configuration 3:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 11
1.001.001FIGURE 14
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
29 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 30

Group 1, Configuration 3:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Close Access
0.500.501Test
34.6373.96TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 2, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 13
1.001.001FIGURE 14
2.252.251FIGURE 16
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
35.8875.21TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
30 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 31

Group 2, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 2, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 11
0.100.101FIGURE 12
1.001.001FIGURE 14
2.252.251FIGURE 16
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
35.9875.31TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
31 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 32

Group 3, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 13
1.001.001FIGURE 14
2.252.251FIGURE 15
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
36.8876.21TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 3, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
32 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 33

Group 3, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 11
0.100.101FIGURE 12
1.001.001FIGURE 14
2.252.251FIGURE 15
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
36.9876.31TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 4, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
33 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 34

Group 4, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 13
1.001.001FIGURE 14
3.5014.004Close Access
0.500.501Test
30.1369.46TOTAL FOR EACH AIRPLANE
Group 4, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 11
1.001.001FIGURE 14
3.5014.004Close Access
0.500.501Test
30.1369.46TOTAL FOR EACH AIRPLANE
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
34 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 35

Group 5:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
2.252.251FIGURE 16
3.5014.004Close Access
0.500.501Test
23.4056.86TOTAL FOR EACH AIRPLANE
Group 6:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
2.252.251FIGURE 15
3.5014.004Close Access
0.500.501Test
23.4056.86TOTAL FOR EACH AIRPLANE
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
35 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 36

Group 7:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
1.001.001Open Access
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001Close Access
3.003.00TOTAL FOR EACH AIRPLANE
Group 8:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
2.252.251FIGURE 16
2.252.25TOTAL FOR EACH AIRPLANE
Group 9:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
2.252.251FIGURE 15
2.252.25TOTAL FOR EACH AIRPLANE
Group 10, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 13
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
36 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 37

Group 10, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
1.001.001FIGURE 14
0.500.501FIGURE 16
3.5014.004Close Access
0.500.501Test
29.6368.96TOTAL FOR EACH AIRPLANE
Group 10, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 11
0.100.101FIGURE 12
1.001.001FIGURE 14
0.500.501FIGURE 16
3.5014.004Close Access
0.500.501Test
29.7369.06TOTAL FOR EACH AIRPLANE
Group 11, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
37 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 38

Group 11, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 13
1.001.001FIGURE 14
2.252.251FIGURE 15
3.5014.004Close Access
0.500.501Test
32.3871.71TOTAL FOR EACH AIRPLANE
Group 11, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
38 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 39

Group 11, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
0.100.101FIGURE 11
1.001.001FIGURE 14
2.252.251FIGURE 15
3.5014.004Close Access
0.500.501Test
32.3871.71TOTAL FOR EACH AIRPLANE
Group 12, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 13
1.001.001FIGURE 14
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
34.6373.96TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
39 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 40

Group 12, Configuration 1:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
the number of locations found during inspection times the estimate and
add the time to access and inspect.
Group 12, Configuration 2:
Elapsed HoursTask-HoursNumber of Per-
sons
Task
3.5014.004Open Access
2.354.702Examine
3.637.252FIGURE 1
1.252.502FIGURE 2
0.881.752FIGURE 3
1.883.752FIGURE 4
2.505.002FIGURE 5
1.161.161FIGURE 6
0.500.501FIGURE 7
0.500.501FIGURE 8
1.001.001FIGURE 9
5.8811.752FIGURE 10
0.100.101FIGURE 11
0.100.101FIGURE 12
1.001.001FIGURE 14
2.25 (a)2.25 (a)1FIGURE 17
2.25 (a)2.25 (a)1FIGURE 18
3.5014.004Close Access
0.500.501Test
34.7374.06TOTAL FOR EACH AIRPLANE
(a) Estimate given is an average to remove pad and repair blanket at one loca-
tion in FIGURE 17 and to install and secure felt at one location in FIGURE
18. It does not include time to access or inspect. Operators should multiply
the number of locations found during inspection times the estimate and
add the time to access and inspect.
H. Weight and Balance Changes
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
40 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 41

I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Engineering Change Memo PRR B12901-64S and PRR B12901-95RS
b. 767-200 Structural Repair Manual (SRM) 51
c. 767-300 Structural Repair Manual (SRM) 51
d. 767-300F Structural Repair Manual (SRM) 51
e. 767-400 Structural Repair Manual (SRM) 51
f. 767 Aircraft Maintenance Manual (AMM) 25-52-01, 25-53-03, 53-01-05
g. Service Related Problem (SRP) 767-SRP-25-0234
h. Standard Overhaul Practices Manual (SOPM) 20-30-03, 20-50-10, 20-50-12
i. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
OVER WING ESCAPE HATCH411T2220
INSULATION INSTL - LOWER COMPARTMENT, SECTION 41411T4113
INSULATION INSTL - LOWER COMPARTMENT, SECTION 43411T4313
INSULATION INSTL - LOWER COMPARTMENT, SECTION 46411T4613
INSULATION INSTL - FWD CARGO COMPT, L/L, SECT 43411T4345
INSULATION INSTL - LOWER LOBE, SECT 46411T4645
INSULATION INSTL - FWD CARGO COMPARTMENT, SECTION
43
411T4401
INSULATION INSTL - AFT & BULK CARGO COMPARTMENT,
SECTION 46
411T4402
INSULATION INSTL - FWD CARGO COMPARTMENT, SECT 43411T4431
INSULATION INSTL - AFT AND BULK CARGO COMPARTMENT,
SECT. 46
411T4432
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
41 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 42

TitleDrawing Number
INSULATION INSTL - FWD CARGO COMPT, SECTION 43411T4701
INSULATION INSTL - AFT BULK CARGO COMPT, SECT. 46411T4702
INSULATION INSTL - AFT & BULK CARGO COMPT, SECT 43411T4731
INSULATION INSTL - AFT AND BULK CARGO COMPARTMENT,
SECT 46
411T4732
SUPPORT INSTL - STA 744.36 BHD, FWD CARGO COMPT.453T1146
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications Affected
Chapter-SectionPublication
11-34, 23-51, 24-11, 24-51, 25-17, 26-11,
26-15, 26-16, 74-31, 78-34
767 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
42 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 43

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1, 12:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$1,198.001612511/23/09TOP KIT - BMS 8-39
FOAM REPLACE-
MENT
015T1792-1
Group 2:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$2,770.001612511/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
43 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 44

Group 3:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$3,967.001614111/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-3
Group 4:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$844.00161211/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-4
Group 5:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$2,029.00154111/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-5
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
44 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 45

Group 6:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$2,869.00154111/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-6
Group 8:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$1,512.00154111/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-8
Group 9:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$2,394.00161111/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-10
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
45 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 46

Group 10:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$1,311.00154111/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-7
Group 11:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT
FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this Ser-
vice Bulletin (US Dollars)
ROLT as
of the
original is-
sue date
of this
Service
Bulletin
(Calendar
Days)
QTYDateNameKit Number
$3,238.00154211/23/09TOP KIT - BMS 8-39
FOAM REPLACEMENT
015T1792-9
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Figure Kit
181615101Top Kit
1--11015T1792-1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
46 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 47

Figure Kit
181615101Top Kit
--1--015T1792-10
11-11015T1792-2
1-111015T1792-3
---11015T1792-4
-1--1015T1792-5
--1-1015T1792-6
---11015T1792-7
-1---015T1792-8
--111015T1792-9
Group 1, 12:
KIT 015T1792-1
NOTES
Existing Part
NumberName
Figure
New Part Number
18101
QTY
NOMEX FELT3015T1792-100
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
INSULATION1233T5216-125
INSULATION1233T5216-126
INSULATION1233T5216-127
INSULATION1233T5216-128
STRAP60BACS38K10
STRAP120BACS38K2
STRAP60BACS38K6
Group 9:
KIT 015T1792-10
NOTES
Existing Part
NumberName
Figure
New Part Number
15
QTY
CORNER SEAL8411T2082-3
VELCRO PILE8411T2220-29
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
47 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 48

Group 2:
KIT 015T1792-2
NOTES
Existing Part
NumberName
Figure
New Part Number
1816101
QTY
NOMEX FELT3015T1792-100
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
INSULATION1233T5216-125
INSULATION1233T5216-126
INSULATION1233T5216-127
INSULATION1233T5216-128
CORNER SEAL4411T2082-3
VELCRO PILE4411T2220-29
STRAP60BACS38K10
STRAP120BACS38K2
STRAP60BACS38K6
Group 3:
KIT 015T1792-3
NOTES
Existing Part
NumberName
Figure
New Part Number
1815101
QTY
NOMEX FELT3015T1792-100
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
INSULATION1233T5216-125
INSULATION1233T5216-126
INSULATION1233T5216-127
INSULATION1233T5216-128
CORNER SEAL8411T2082-3
VELCRO PILE8411T2220-29
STRAP60BACS38K10
STRAP120BACS38K2
STRAP60BACS38K6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
48 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 49

Group 4:
KIT 015T1792-4
NOTES
Existing Part
NumberName
Figure
New Part Number
101
QTY
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
INSULATION1233T5216-125
INSULATION1233T5216-126
INSULATION1233T5216-127
INSULATION1233T5216-128
Group 5:
KIT 015T1792-5
NOTES
Existing Part
NumberName
Figure
New Part Number
161
QTY
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
CORNER SEAL4411T2082-3
VELCRO PILE4411T2220-29
Group 6:
KIT 015T1792-6
NOTES
Existing Part
NumberName
Figure
New Part Number
151
QTY
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
CORNER SEAL8411T2082-3
VELCRO PILE8411T2220-29
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
49 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 50

Group 10:
KIT 015T1792-7
NOTES
Existing Part
NumberName
Figure
New Part Number
101
QTY
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
INSULATION1233T5216-125
INSULATION1233T5216-126
INSULATION1233T5216-127
INSULATION1233T5216-128
Group 8:
KIT 015T1792-8
NOTES
Existing Part
NumberName
Figure
New Part Number
16
QTY
CORNER SEAL4411T2082-3
VELCRO PILE4411T2220-29
Group 11:
KIT 015T1792-9
NOTES
Existing Part
NumberName
Figure
New Part Number
15101
QTY
FOAM TAPE, 0.5 T
X 2.0 W
4015U1780-8
INSULATION1233T5216-125
INSULATION1233T5216-126
INSULATION1233T5216-127
INSULATION1233T5216-128
CORNER SEAL8411T2082-3
VELCRO PILE8411T2220-29
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
50 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 51

2. Parts and Materials Supplied by the Operator:
Group 1, 3, 12:
NotesNameQTYPart Number / Specification
(a)ADHESIVE32 OZBMS 5-30, TYPE I
(a)INSULATION BLANKET TAPE2
ROLL
BMS 5-157, TYPE 1, CLASS 1,
GRADE A OR B, FORM 1,
COMPOSITE MPVF
(a)PERMACEL TAPE8 FTBMS 5-146, TYPE 1, CLASS 1,
GRADE A
(a)INSULATION BLANKET TAPE50 FTBMS 5-149, TYPE XI, CLASS 2,
GRADE C, FORM 1  (BMS 5-
157, TYPE 1, CLASS 1 GRADE
A OR B, FORM 1, COMPOSITE
MPVF optional)
(a)LACING TAPE100
FT
BMS 13-54, GRADE D, TYPE
III, CLASS 1, FINISH C
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
Group 2:
NotesNameQTYPart Number / Specification
(a)ADHESIVE32 OZBMS 5-30, TYPE I
(a)INSULATION BLANKET TAPE2
ROLL
BMS 5-157, TYPE 1, CLASS 1,
GRADE A OR B, FORM 1,
COMPOSITE MPVF
(a)PERMACEL TAPE8 FTBMS 5-146, TYPE 1, CLASS 1,
GRADE A
(a)INSULATION BLANKET TAPE50 FTBMS 5-149, TYPE XI, CLASS 2,
GRADE C, FORM 1  (BMS 5-
157, TYPE 1, CLASS 1 GRADE
A OR B, FORM 1, COMPOSITE
MPVF optional)
(a)LACING TAPE100
FT
BMS 13-54, GRADE D, TYPE
III, CLASS 1, FINISH C
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
Group 4, 11:
NotesNameQTYPart Number / Specification
(a)ADHESIVE32 OZBMS 5-30, TYPE I
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
51 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 52

Group 4, 11:
NotesNameQTYPart Number / Specification
(a)PERMACEL TAPE8 FTBMS 5-146, TYPE 1, CLASS 1
GRADE A
(a)INSULATION BLANKET TAPE50 FTBMS 5-149, TYPE XI, CLASS 2,
GRADE C, FORM 1  (BMS 5-
157, TYPE 1, CLASS 1 GRADE
A OR B, FORM 1, COMPOSITE
MPVF optional)
(a)LACING TAPE100
FT
BMS 13-54, GRADE D, TYPE
III, CLASS 1, FINISH C
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
Group 5-6:
NotesNameQTYPart Number / Specification
(a)ADHESIVE16 OZBMS 5-30, TYPE I
(a)INSULATION BLANKET TAPE50 FTBMS 5-149, TYPE XI, CLASS 2,
GRADE C, FORM 1  (BMS 5-
157, TYPE 1, CLASS 1 GRADE
A OR B, FORM 1, COMPOSITE
MPVF optional)
(a)LACING TAPE100
FT
BMS 13-54, GRADE D, TYPE
III, CLASS 1, FINISH C
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
Group 7:
NotesNameQTYPart Number / Specification
(a)ADHESIVE16 OZBMS 5-30, TYPE I
(a)PERMACEL TAPE8 FTBMS 5-146, TYPE 1, CLASS 1,
GRADE A
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
Group 8:
NotesNameQTYPart Number / Specification
(a)PERMACEL TAPE8 FTBMS 5-146, TYPE 1, CLASS 1,
GRADE A
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
52 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 53

Group 8:
NotesNameQTYPart Number / Specification
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
Group 9:
None
Group 10:
NotesNameQTYPart Number / Specification
(a)ADHESIVE32 OZBMS 5-30, TYPE I
(a)INSULATION BLANKET TAPE50 FTBMS 5-149, TYPE XI, CLASS 2,
GRADE C, FORM 1  (BMS 5-
157, TYPE 1, CLASS 1 GRADE
A OR B, FORM 1, COMPOSITE
MPVF optional)
(a)LACING TAPE100
FT
BMS 13-54, GRADE D, TYPE
III, CLASS 1, FINISH C
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
3. Parts Modified and Reidentified:
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
Group 1, Configuration 3; Group 2-4, 10-12, Configuration 2:
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-24
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-25
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-26
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-27
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-32
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-33
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
53 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 54

Group 1, Configuration 3; Group 2-4, 10-12, Configuration 2:
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-35
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-39
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-40
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-41
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-42
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-43
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-44
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-45
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-46
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-48
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-49
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-50
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-51
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-52
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-54
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-55
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-56
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-57
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-58
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
54 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 55

Group 1, Configuration 3; Group 2-4, 10-12, Configuration 2:
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-59
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-60
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-61
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-62
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-63
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-64
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-65
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-66
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-67
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-68
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-69
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-70
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-72
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-73
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-74
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-77
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-78
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-79
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-83
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
55 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 56

Group 1, Configuration 3; Group 2-4, 10-12, Configuration 2:
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-84
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-85
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-86
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-87
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-97
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-98
(a) (b) (c) (d)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-108
(a) (b) (c) (f)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-202
(a) (b) (c) (e)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-203
(a) (b) (c) (e)SB 767-25-0381Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-204
(a) Make the change given in this service bulletin.
(b) This is the part number after the change given in this service bulletin.
(c) This part is not used in production.
(d) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change given in this service bulletin was made.
(e) The equivalent production part number is 233T5216-209.
(f) The equivalent production part number is 233T5216-210.
Group 1, Configuration 1; Group 2-3, 10, 12, Configuration 2:
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c)233T5216-209Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-205
(a) Make the change given in this service bulletin.
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
56 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 57

Group 1, Configuration 2; Group 2-4, 10-12, Configuration 1:
NotesNew Part NumberNameQTYExisting Part
Number
(a) (b) (c)233T5216-210Pilots Circuit Breaker
P11 Panel Assembly
1233T5216-206
(a) Make the change given in this service bulletin.
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
4. Parts Removed and Not Replaced:
None.
NotesQTYNameExisting Part Number
12CORNER SEAL411T2082-1
(a) Keep the part if there are other uses for it.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
57 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 58

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
58 of 130
BOEING SERVICE BULLETIN 767-25-0381
BLANK PAGE

### Page 59

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch.
— Torque limits to tighten nuts and bolts are given in 767-200 SRM 51, 767-300
SRM 51, 767-300F SRM 51 and 767-400 SRM 51.
4. For approved fastener and process material substitutions, refer to 767-200 SRM 51,
767-300 SRM 51, 767-300F SRM 51 and 767-400 SRM 51. Alternate fasteners are
given in 767-200 SRM 51, 767-300 SRM 51, 767-300F SRM 51, 767-400 SRM 51
and Boeing Drawing 012W6100.
5. Refer to SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures.
6. If the length of fasteners specified in this service bulletin do not meet the installation
standards, fasteners of the same specification, or an approved substitute, one grip
length longer or shorter may be used.
7. These work instructions refer to procedures included on other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. The quantity numbers shown for parts used in each step of the figures are the total
number of parts necessary for each step.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
59 of 130
BOEING SERVICE BULLETIN 767-25-0381

### Page 60

For bulk material rolls, the quantity number shown in the first-use step is the total
number of rolls provided in the top kit. The quantity number is not shown in the figure
steps thereafter.
9. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to ensure visual access to all surfaces in the
inspection area. This level of inspection is made under normal available lighting
conditions such as daylight, hangar lighting, flashlight or drop-light and may require
removal or opening of access panels or doors. Stands, ladders or platforms may be
required to gain proximity to the area being checked.
10. Foam seals are not replaced in areas where the foam is encapsulated by a fire
resistant barrier or where the foam is physically isolated from an ignition source.
Refer to APPENDIX B for typical examples of foam seals that are not replaced.
B. WORK INSTRUCTIONS
No action is needed on BMS 8-39 urethane foam in the areas as shown in APPENDIX B.
1. Group 1-6, 10-12:
Remove the endwall curtain. Refer to 767 AMM 25-52-01 as an accepted procedure.
2. Group 1-6, 10-12:
Remove the sloping sidewalls in the FWD cargo compartment. Refer to 767 AMM 25-52-01 as an
accepted procedure.
3. Group 1-6, 10-12:
Remove the sloping sidewalls in the AFT cargo compartment. Refer to 767 AMM 25-52-01 as an
accepted procedure.
4. Group 1-6, 10-12:
Remove the ball transfer panels in the FWD cargo compartment. Refer to 767 AMM 25-53-03 as
an accepted procedure.
5. Group 1-6, 10-12:
Remove the ball transfer panels in the AFT cargo compartment. Refer to 767 AMM 25-53-03 as
an accepted procedure.
6. Group 1-6, 10-12:
Remove the floor panels in the FWD cargo compartment. Refer to 767 AMM 53-01-05 as an
accepted procedure.
7. Group 1-6, 10-12:
Remove the floor panels in the AFT cargo compartment. Refer to 767 AMM 53-01-05 as an
accepted procedure.
8. Group 1-6, 10-12:
Do a general visual inspection at left side of the FWD cargo compartment area behind the sloping
sidewalls from STA 305 to STA 742. Look for BMS 8-39 foam around system runs in accordance
with FIGURE 1. There are approximate 18 locations where there is BMS 8-39 foam in the FWD
cargo compartment left side sloping sidewall area. The quantity on each aircraft can be different.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 19, 2010
767-25-0381Revision 1: September 17, 2012
60 of 130
BOEING SERVICE BULLETIN 767-25-0381

The text continues at https://openairdocs.org/service-documents/boeing/sb-767-25-0381/file/f52d66a1db3b.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
