# Boeing Service Bulletin 767-25-0477: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-0127; AD 2010-26-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 767-25-0477](https://openairdocs.org/service-documents/boeing/sb-767-25-0477.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 367
- PDF: https://openairdocs.org/files/sha256/52/c2/52c2cc370d63c662ddf3282d0380ca428b6a1318e337e45f537fa44d339c11c9
- Page: https://openairdocs.org/service-documents/boeing/sb-767-25-0477/file/52c2cc370d63

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial        
Airplane
Group 
 767
Service Bulletin
Number: 767-25-0477
Date: August 27, 2009
ATA System: 2522
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Compartment
Ceiling Lining - Entryway Door Ceiling Panel Hinge Pin Inspection/Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2009 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all
trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document
unless provided in writing by Boeing.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
1 of 367
2.0

### Page 2

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
2 of 367
BOEING SERVICE BULLETIN 767-25-0477
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 2 0
B. Concurrent Requirements ...................................... 2 1
C. Reason ................................................ 2 1
D. Description .............................................. 2 1
E. Compliance .............................................. 2 3
F. Approval ............................................... 2 3
G. Manpower .............................................. 2 3
H. Weight and Balance Changes .................................... 2 7
I. Electrical Load Data ......................................... 2 7
J. References .............................................. 2 8
1. Existing Data .......................................... 2 8
2. Data supplied with this Service Bulletin ............................ 2 8
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 8
K. Publications Affected ........................................ 2 9
L. Interchangeability and Intermixability of Parts ........................... 2 9
2. MATERIAL INFORMATION ........................................ 3 1
A. Material - Price and Availability ................................... 3 1
B. Industry Support Information .................................... 3 1
C. Parts Necessary For Each Airplane ................................. 3 2
1. Kits/Parts ............................................ 3 2
2. Parts and Materials Supplied by the Operator ........................ 3 3
3. Parts Modified and Reidentified ................................ 3 3
4. Parts Removed and Not Replaced .............................. 4 4
D. Parts Necessary to Change Spares ................................. 4 4
E. Special Tooling - Price and Availability ............................... 4 5
F. Special Tooling Necessary to do this Service Bulletin ....................... 4 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 7
A. GENERAL INFORMATION ..................................... 4 7
B. WORK INSTRUCTIONS ....................................... 4 8
FIGURE 1: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY, HINGE PIN - INSPECTION
[Group 1] ............................................ 6 5
FIGURE 2: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY, HINGE PIN - INSPECTION
[Group 2-6, 9-10, 12, 15] .................................... 7 0
FIGURE 3: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY, HINGE PIN - INSPECTION
[Group 7-8, 11, 13-14, 16] ................................... 7 5
FIGURE 4: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY, HINGE PIN - INSPECTION
[Group 20] ............................................ 8 0
FIGURE 5: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY, HINGE PIN - INSPECTION
[Group 17-19] .......................................... 8 5
FIGURE 6: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 1]
.................................................. 8 8
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
3 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 4

FIGURE 7: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 2,
10] ................................................ 9 1
FIGURE 8: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 3,
9 ]  ................................................ 9 6
FIGURE 9: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 4]
................................................. 1 0 1
FIGURE 10: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 5]
................................................. 1 0 6
FIGURE 11: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 6]
................................................. 1 1 1
FIGURE 12: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 7]
................................................. 1 1 6
FIGURE 13: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 8]
................................................. 1 2 4
FIGURE 14: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 11,
13] ............................................... 1 3 2
FIGURE 15: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 12]
................................................. 1 4 0
FIGURE 16: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 14]
................................................. 1 4 5
FIGURE 17: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 15]
................................................. 1 5 3
FIGURE 18: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 16]
................................................. 1 5 8
FIGURE 19: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 17]
................................................. 1 6 6
FIGURE 20: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 18]
................................................. 1 6 8
FIGURE 21: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 19]
................................................. 1 7 0
FIGURE 22: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - IDENTIFICATION [Group 20]
................................................. 1 7 2
FIGURE 23: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 1]
................................................. 1 8 0
FIGURE 24: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 2, 10]
................................................. 1 8 6
FIGURE 25: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 3, 9]
................................................. 1 9 7
FIGURE 26: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 4]
................................................. 2 0 8
FIGURE 27: MOVABLE CEILING ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 5] . . 219
FIGURE 28: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 6]
................................................. 2 3 0
FIGURE 29: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 7]
................................................. 2 4 1
FIGURE 30: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 8]
................................................. 2 5 6
FIGURE 31: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 11,
13] ............................................... 2 7 1
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
4 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 5

FIGURE 32: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 12]
................................................. 2 8 6
FIGURE 33: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 14]
................................................. 2 9 7
FIGURE 34: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 15]
................................................. 3 1 2
FIGURE 35: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 16]
................................................. 3 2 3
FIGURE 36: MOVABLE CEILING PANEL ASSEMBLY (LOWERED), HINGE ASSEMBLY - REPLACEMENT
[Group 17] ........................................... 3 3 8
FIGURE 37: MOVABLE CEILING PANEL ASSEMBLY (LOWERED), HINGE ASSEMBLY - REPLACEMENT
[Group 18] ........................................... 3 4 2
FIGURE 38: MOVABLE CEILING PANEL ASSEMBLY (LOWERED), HINGE ASSEMBLY - REPLACEMENT
[Group 19] ........................................... 3 4 6
FIGURE 39: MOVABLE CEILING PANEL ASSEMBLY, HINGE ASSEMBLY - REPLACEMENT [Group 20]
................................................. 3 5 0
APPENDIX A: CRIMP INSPECTION ..................................... 3 6 5
APPENDIX B: PROCESS SPECIFICATION BAC 5018 INSTALLATION OF SAFETYING DEVICES . . 367
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
5 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 6

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
6 of 367
BOEING SERVICE BULLETIN 767-25-0477
BLANK PAGE

### Page 7

Commercial        
Airplane
Group 
 767
Service Bulletin
SummaryNumber: 767-25-0477Date: August 27, 2009
ATA System: 2522
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Compartment
Ceiling Lining - Entryway Door Ceiling Panel Hinge Pin Inspection/Repair
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin is prepared to inspect/repair the movable ceiling panel above Type "A" entryway doors.
The hinge pin on the hinge assembly installed on the movable ceiling panel is not always retained in the hinge
assembly stock. If this service bulletin is not done the hinge pin can migrate away from the hinge assembly and
damage wires, tie-rods, and movable ceiling panel surfaces.
Boeing received a report that an operator experienced several fault messages during a maintenance check. An
investigation of the fault messages revealed that the forward, left side, entryway door's movable ceiling panel
hinge pin had come into contact with some wires, causing damage/breakage. There were also reported instances
of migrating hinge pins causing minor cosmetic damage and one reported instance of a hinge pin causing tie-rod
chafing.
Boeing conducted a Quality Assurance Investigation (QAI) with the vendor. It was determined that the cause of
the migrating hinge pin is a result of the vendor not properly crimping the hinge assembly stock per specifications.
The vendor was told to review their crimping process and incorporate quality checks as necessary to provide
an acceptable crimp.
This change gives instructions to inspect, identify, and/or replace the hinge assembly on the movable ceiling
panel above Type "A" entryway doors. Inspection of the hinge assembly will make sure that the hinge stock has
been crimped correctly. It will also determine if whether or not the hinge assembly needs to be replaced.
Replacement of the hinge assembly will make sure the hinge pin does not migrate.
Boeing Service Related Problem (SRP) 767-SRP-25-0262 is related to this service bulletin.
ACTION (PRR B12901-86S)
1. Do a detailed inspection of the hinge assembly for correct crimp and hinge pin migration.
a. Determine if hinge assembly crimp does/does not meet specification.
b. Determine if hinge assembly needs to be replaced.
2. Crimp the hinge assembly stock per specification if the crimp size is not acceptable.
3. Replace the hinge assembly if one or more of the following conditions are met:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
7 of 367

### Page 8

a. The crimp size is too small
b. The hinge assembly stock has cracks or missing material
c. The hinge pin is deformed (i.e. bent, cracked, broken, missing material)
4. Identify the movable ceiling panel and hinge assemblies after inspection/replacement with a new part
number.
EFFECTIVITY
767-200, -300, -300F, -400ER Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the inspection/repair given in this service bulletin be done within 6 years after the date
on this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of October 18, 2005. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
3.056.10Group 1
6.1012.20Group 2
6.1012.20Group 3
6.1012.20Group 4
6.1012.20Group 5
6.1012.20Group 6
9.1518.30Group 7
9.1518.30Group 8
6.1012.20Group 9
6.1012.20Group 10
9.1518.30Group 11
6.1012.20Group 12
9.1518.30Group 13
9.1518.30Group 14
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
8 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 9

Elapsed HoursTotal Task HoursAirplanes
6.1012.20Group 15
9.1518.30Group 16
3.303.30Group 17
3.303.30Group 18
3.303.30Group 19
9.1518.30Group 20
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
9 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 10 (OCR)

BOEING SERVICE BULLETIN 767-25-0477
INSPECT, IDENTIFY, AND/OF
REPLACE THE HINGE ASSEMBLY
ON THE MOVABLE CEILING PANEL
ABOVE THE FORWARD TYPE "A"
ENTRYWAY DOORS
GROUP 1
INSPECT, INDENTIFY, AND/OR REPLACE
THE HINGE ASSEMBLY ON THE MOVABLE
CEILING PANEL ABOVE THE FORWARD AND
AFT TYPE "A" ENTRYWAY DOORS
GROUPS 2, 3 - 6, 9, 10, 12, 15
INSPECT, IDENTIFY, AND/OR REPLACE
THE HINGE ASSEMBLY ON THE
MOVABLE CEILING PANEL ABOVE THE
FORWARD, MID CABIN, AND AFT TYPE
"A" ENTRYWAY DOORS
GROUPS 7-8, 11, 13-14, 16, 20
1550952
August 27, 2009
767-25-0477
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  10 of 367

### Page 11 (OCR)

BOEING SERVICE BULLETIN 767-25-0477
INSPECT, IDENTIFY, AND/OR REPLACE
THE HINGE ASSEMBLY ON THE
MOVABLE CEILING PANEL ABOVE THE
FORWARD, MID CABIN, AND AFT TYPE
"A" ENTRYWAY DOORS
GROUP 20
INSPECT, IDENTIFY, AND/OR REPLACE
THE HINGE ASSEMBLY ON THE MOVABLE
CEILING PANEL ABOVE THE FORWARD
TYPE "A" ENTRYWAY DOORS
GROUP 17, 18, 19
1550955
August 27, 2009
767-25-0477
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  11 of 367

### Page 12

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
12 of 367
BOEING SERVICE BULLETIN 767-25-0477
BLANK PAGE

### Page 13

Commercial        
Airplane
Group 
 767
Service Bulletin
Number: 767-25-0477
Date: August 27, 2009
ATA System: 2522
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Compartment
Ceiling Lining - Entryway Door Ceiling Panel Hinge Pin Inspection/Repair
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624T001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR B12901-86S for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
767-200 airplanes delivered prior to September 1981 that require an
inspection/repair of the forward cabin door's movable ceiling panel
assembly's hinge assembly.
-1
767-200 airplanes delivered in January 1991 that require
inspection/repair of forward and aft doors' movable ceiling panel
assembly's hinge assembly.
-2
767-200, -300 airplanes delivered between January 1990 and July
1992 that require inspection/repair of forward and aft cabin doors'
movable ceiling panel assembly's hinge assembly.
-3
767-200, -300 airplanes delivered between July 1992 and May 1993
that require inspection/repair of forward and aft cabin doors' movable
ceiling panel assembly's hinge assembly.
-4
767-200, -300 airplanes delivered between April 1993 and April 2004
that require inspection/repair of forward and aft cabin doors' movable
ceiling panel assembly's hinge assembly.
-5
767-200, -300 airplanes delivered between April 2004 and December
2007 that require inspection/repair of forward and aft cabin doors'
movable ceiling panel assembly's hinge assembly.
-6
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
13 of 367

### Page 14

DESCRIPTIONCONFIGURATIONGROUP
767-300 airplanes delivered between February 1990 and August
1990 that require inspection/repair of forward, mid, and aft cabin
doors' movable ceiling panel assembly's hinge assembly.
-7
767-300 airplanes delivered between April 1990 and July 1992 that
require inspection/repair of the forward, mid, and aft cabin doors'
movable ceiling panel assembly's, hinge assembly.
-8
767-300 airplanes delivered between April 1990 and July 2007 that
require inspection/repair of forward and aft doors' movable ceiling
panel assembly's hinge assembly.
-9
767-300 airplanes delivered between June 1990 and April 1992 that
require inspection/repair of forward and aft cabin doors' movable
ceiling panel assembly's hinge assembly.
-10
767-300 airplanes delivered between June 1992 and April 1993 that
require inspection/repair of the forward, mid, and aft cabin doors'
movable ceiling panel assembly's hinge assembly.
-11
767-300 airplanes delivered between August 1992 and November
1992 that require inspection/repair of forward and aft cabin doors'
movable ceiling panel assembly's hinge assembly.
-12
767-300 airplanes delivered in September 1992 that require
inspection/repair of forward, mid, and aft doors' movable ceiling panel
assembly's hinge assembly.
-13
767-300 airplanes delivered between December 1992 and March
1993 that require inspection/repair of forward, mid, and aft cabin
doors' movable ceiling panel assembly's hinge assembly.
-14
767-300 airplanes delivered between April 1993 and July 2000 that
require inspection/repair of forward and aft cabin doors' movable
ceiling panel assembly's hinge assembly.
-15
767-300 airplanes delivered between June 2004 and August 2007
that require inspection/repair of forward, mid, and aft cabin doors'
movable ceiling panel assembly's hinge assembly.
-16
767-300F airplanes delivered between October 1995 and December
1998 that require inspection/repair of the forward entryway door's
movable ceiling panel assembly's hinge assembly.
-17
767-300F airplanes delivered between June 1999 and November
2001 that require inspection/repair of the forward entryway door's
movable ceiling panel assembly's hinge assembly.
-18
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
14 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 15

DESCRIPTIONCONFIGURATIONGROUP
767-300F airplanes delivered between August 2002 and October
2007 that require inspection/repair of the forward entryway door's
movable ceiling panel assembly's hinge assembly.
-19
767-300, -400ER airplanes delivered between May 1993 and
November 2003 that require inspection/repair of forward, mid, and
aft doors' movable ceiling panel assembly's hinge assembly.
-20
Airplane Models:
767-200, 767-300, 767-300F, 767-400ER
GroupVariable Number
1VA001
3VB329 - VB332
5VB441 - VB444
2VE118
3VE147 - VE151
4VE152
3VE171 - VE172
3VF062
3VF071 - VF072
3VF091 - VF093
3VF101 - VF102
3VF161
5VF162
4VF171 - VF172
5VF180 - VF184
5VF251
3VK010 - VK011
5VK012 - VK016
10VK046 - VK054
15VK055 - VK056
3VK094 - VK100
4VK101 - VK102
5VK103 - VK113
8VK131 - VK133
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
15 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 16

GroupVariable Number
3VK141 - VK142
5VK143 - VK148
8VK161
11VK162
20VK163 - VK164
5VK171
5VK181
5VK186
5VL701 - VL703
20VL751 - VL755
20VL806 - VL807
20VL871 - VL873
20VL891 - VL900
20VL911 - VL914
5VL931 - VL932
5VL941
3VN016 - VN024
4VN025 - VN029
5VN030 - VN041
9VN059 - VN064
3VN086 - VN092
4VN093
5VN094 - VN099
8VN111 - VN124
11VN125 - VN127
8VN130 - VN132
20VN133 - VN137
3VN156 - VN158
3VN163 - VN168
20VN174
3VN193 - VN194
4VN195
5VN196 - VN198
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
16 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 17

GroupVariable Number
3VN222 - VN224
5VN225
7VN232 - VN234
11VN242 - VN243
10VN251 - VN260
12VN261 - VN262
15VN263 - VN276
3VN291
5VN292 - VN293
8VN301 - VN307
11VN308
20VN309 - VN314
8VN371 - VN372
8VN376
8VN381
13VN382
14VN383 - VN384
20VN385 - VN388
20VN421
5VN422 - VN427
5VN436
8VN471 - VN472
3VN491 - VN497
4VN498 - VN509
5VN510 - VN513
8VN531 - VN532
8VN536 - VN537
8VN541 - VN542
20VN546 - VN547
8VN551
11VN556 - VN557
11VN561
20VN562
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
17 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 18

GroupVariable Number
8VN631 - VN633
20VN634 - VN638
3VN651 - VN652
5VN653 - VN658
3VN671 - VN672
5VN676
3VN681 - VN683
4VN684 - VN687
5VN688 - VN691
3VN731
5VN732
3VN751 - VN753
8VN791 - VN792
4VN811 - VN813
11VN921
20VN922
15VN931
5VN932 - VN936
20VN951 - VN953
5VN966 - VN972
20VQ001 - VQ021
20VQ071 - VQ086
5VR051 - VR060
5VR081
5VR084
5VR086
6VR087 - VR089
6VR106 - VR107
17VR201 - VR206
18VR207 - VR211
17VR251
18VR256 - VR260
5VR401
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
18 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 19

GroupVariable Number
5VR421 - VR423
5VR426
5VR441
5VR461
15VR471 - VR472
20VS051 - VS056
20VS061
15VS066 - VS070
15VS073 - VS078
5VS091 - VS104
5VS111 - VS113
5VS131 - VS133
20VS136 - VS137
5VS176 - VS177
5VS186 - VS187
5VS196 - VS203
5VS206 - VS208
20VS211
20VS216 - VS217
5VS231
20VS246 - VS248
20VS261 - VS263
15VS266 - VS274
5VS291 - VS293
5VS301 - VS303
20VS306 - VS311
20VS316
20VS321 - VS324
20VS331 - VS333
20VS336 - VS337
5VS366 - VS367
5VS381 - VS382
5VS391 - VS392
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
19 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 20

GroupVariable Number
5VS401
20VS426 - VS428
5VS466 - VS472
5VS486
20VS496 - VS497
20VS506 - VS507
5VS526
5VS546 - VS549
5VS701 - VS708
6VS709 - VS717
5VS721 - VS729
6VS730 - VS734
5VS751 - VS759
5VS821 - VS825
5VS841 - VS844
5VS861
20VS881
16VS882 - VS883
16VS891
6VS896
6VS901 - VS907
6VS911 - VS912
16VS916
19VT501
19VT511 - VT513
19VT521 - VT523
19VT531 - VT533
17VW701 - VW721
17VW851
2. Spares Affected
None.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
20 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 21

B. Concurrent Requirements
None.
C. Reason
This service bulletin is prepared to inspect/repair the movable ceiling panel above Type "A" entryway
doors. The hinge pin on the hinge assembly installed on the movable ceiling panel is not always retained
in the hinge assembly stock. If this service bulletin is not done the hinge pin can migrate away from
the hinge assembly and damage wires, tie-rods, and movable ceiling panel surfaces.
Boeing received a report that an operator experienced several fault messages during a maintenance
check. An investigation of the fault messages revealed that the forward, left side, entryway door's
movable ceiling panel hinge pin had come into contact with some wires, causing damage/breakage.
There were also reported instances of migrating hinge pins causing minor cosmetic damage and one
reported instance of a hinge pin causing tie-rod chafing.
Boeing conducted a Quality Assurance Investigation (QAI) with the vendor. It was determined that the
cause of the migrating hinge pin is a result of the vendor not properly crimping the hinge assembly
stock per specifications. The vendor was told to review their crimping process and incorporate quality
checks as necessary to provide an acceptable crimp.
This change gives instructions to inspect, identify, and/or replace the hinge assembly on the movable
ceiling panel above Type "A" entryway doors. Inspection of the hinge assembly will make sure that the
hinge stock has been crimped correctly. It will also determine if whether or not the hinge assembly
needs to be replaced. Replacement of the hinge assembly will make sure the hinge pin does not
migrate.
Boeing Service Related Problem (SRP) 767-SRP-25-0262 is related to this service bulletin.
D. Description
1. Do a detailed inspection of the hinge assembly for correct crimp and pin migration.
a. Determine if hinge assembly crimp does/does not meet specification
b. Determine if hinge assembly needs to be replaced.
2. Crimp the hinge assembly stock per specification if the crimp size is not acceptable..
3. Replace the hinge assembly if one or more of the following conditions are met:
a. The crimp size is to small
b. The hinge assembly stock has cracks or missing material
c. The hinge pin is deformed (i.e. bent, cracked, broken, missing material)
4. Identify the movable ceiling panel and hinge assemblies after inspection/replacement with a new
part number.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
21 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 22

Group 1:
Affected Maintenance Zones
ZoneModel
223, 224767-200
Group 2:
Affected Maintenance Zones
ZoneModel
223, 224, 253, 254767-200
Group 3-6:
Affected Maintenance Zones
ZoneModel
223, 224, 253, 254767-200, 767-300
Group 7-8, 11, 13-14, 16:
Affected Maintenance Zones
ZoneModel
223, 224, 233, 234, 253, 254767-300
Group 9-10, 12, 15:
Affected Maintenance Zones
ZoneModel
223, 224, 253, 254767-300
Group 17-19:
Affected Maintenance Zones
ZoneModel
223767-300F
Group 20:
Affected Maintenance Zones
ZoneModel
223, 224, 233, 234, 253, 254767-300, 767-400ER
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
22 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 23

E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the inspection/repair given in this service bulletin be done within 6 years after
the date on this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Elapsed HoursTask HoursNumber of
Persons
Task
0.400.802Figure 1
0.400.802Figure 5
2.254.502Figure 22
3.056.10TOTAL FOR EACH AIRPLANE
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
23 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 24

Group 2, 10:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
0.801.602Figure 6
4.509.002Figure 23
6.1012.20TOTAL FOR EACH AIRPLANE
Group 3, 9:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
0.801.602Figure 7
4.509.002Figure 24
6.1012.20TOTAL FOR EACH AIRPLANE
Group 4:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
0.801.602Figure 8
4.509.002Figure 25
6.1012.20TOTAL FOR EACH AIRPLANE
Group 5:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
0.801.602Figure 9
4.509.002Figure 26
6.1012.20TOTAL FOR EACH AIRPLANE
Group 6:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
24 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 25

Group 6:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 10
4.509.002Figure 27
6.1012.20TOTAL FOR EACH AIRPLANE
Group 7:
Elapsed HoursTask HoursNumber of
Persons
Task
1.202.402Figure 3
1.202.402Figure 11
6.7513.502Figure 28
9.1518.30TOTAL FOR EACH AIRPLANE
Group 8:
Elapsed HoursTask HoursNumber of
Persons
Task
1.202.402Figure 3
1.202.402Figure 12
6.7513.502Figure 29
9.1518.30TOTAL FOR EACH AIRPLANE
Group 11, 13:
Elapsed HoursTask HoursNumber of
Persons
Task
1.202.402Figure 3
1.202.402Figure 13
6.7513.502Figure 30
9.1518.30TOTAL FOR EACH AIRPLANE
Group 12:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
0.801.602Figure 14
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
25 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 26

Group 12:
Elapsed HoursTask HoursNumber of
Persons
Task
4.509.002Figure 31
6.1012.20TOTAL FOR EACH AIRPLANE
Group 14:
Elapsed HoursTask HoursNumber of
Persons
Task
1.202.402Figure 3
1.202.402Figure 15
6.7513.502Figure 32
9.1518.30TOTAL FOR EACH AIRPLANE
Group 15:
Elapsed HoursTask HoursNumber of
Persons
Task
0.801.602Figure 2
0.801.602Figure 16
4.509.002Figure 33
6.1012.20TOTAL FOR EACH AIRPLANE
Group 16:
Elapsed HoursTask HoursNumber of
Persons
Task
1.202.402Figure 3
1.202.402Figure 17
6.7513.502Figure 34
9.1518.30TOTAL FOR EACH AIRPLANE
Group 17:
Elapsed HoursTask HoursNumber of
Persons
Task
0.400.401Figure 4
0.400.401Figure 18
2.502.501Figure 35
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
26 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 27

Group 17:
Elapsed HoursTask HoursNumber of
Persons
Task
3.303.30TOTAL FOR EACH AIRPLANE
Group 18:
Elapsed HoursTask HoursNumber of
Persons
Task
0.400.401Figure 4
0.400.401Figure 19
2.502.501Figure 36
3.303.30TOTAL FOR EACH AIRPLANE
Group 19:
Elapsed HoursTask HoursNumber of
Persons
Task
0.400.401Figure 4
0.400.401Figure 20
2.502.501Figure 37
3.303.30TOTAL FOR EACH AIRPLANE
Group 20:
Elapsed HoursTask HoursNumber of
Persons
Task
1.202.402Figure 3
1.202.402Figure 21
6.7513.502Figure 38
9.1518.30TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
27 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 28

J. References
1. Existing Data
a. Engineering Change Memo PRR B12901-86S
b. Standard Overhaul Practices Manual (SOPM) 20-50-10, 20-50-12
c. Standard Wiring Practices Manual (SWPM) 20-00-14, 20-10-04, 20-10-06, 20-10-11, 20-10-12,
20-10-13, 20-10-18, 20-10-19
d. 767 Aircraft Maintenance Manual (AMM) 24-22-00, 25-22-02, 25-22-03
e. 767-200 Structural Repair Manual (SRM) 51-00-00, 51-10-02
f. 767-300 Structural Repair Manual (SRM) 51-00-00, 51-10-02
g. 767-300F Structural Repair Manual (SRM) 51-00-00, 51-10-02
h. 767-400 Structural Repair Manual (SRM) 51-00-00, 51-10-02
i. Fleet Team Digest 767 FTD 25-06007
j. Fleet Team Emerging Issue FTEI EM-07-00095
k. Boeing Service Letter 767-SL-25-117
l. Boeing Service Related Problem 767-SRP-25-0262
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
TitleDrawing Number
TOP INSTALLATION - VARIABLE, PAYLOADS400T0001
CEILING INSTALLATION - MID CABIN MOVABLE411T3009
CEILING INSTALLATION - FORWARD MOVABLE411T3022
CEILING INSTALLATION - AFT MOVABLE411T3032
COLOR CODE CHART - LOWERED CEILING411T3977
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
28 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 29 (OCR)

BOEING SERVICE BULLETIN 767-25-0477
K. Publications Affected
Publication  Chapter-Section
767 Illustrated Parts Catalog  25-22
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
August 27, 2009
767-25-0477
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  29 of 367

### Page 30

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
30 of 367
BOEING SERVICE BULLETIN 767-25-0477
BLANK PAGE

### Page 31

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the parts shown in Paragraph 2.C., Parts Necessary for Each Airplane , and
Paragraph 2.D., Parts Necessary to Change Spares,as shown below. If there is a limit in the quantity
(QTY) of parts, a supply sequence is given by Spares.
Unit Price thru
December 31,
2008
QTYDateNamePart Number
$579.00150July 29, 2008HINGE ASSEMBLY411T3045-13
$568.005July 29, 2008HINGE ASSEMBLY411T3045-15B
$111.0055July 18, 2008RUB STRIP411T3117-3
55August 15, 2008
45September 15,
2008
$73.005June 24, 2008PAD411T3320-101
$0.062June 03, 2008SCREWNAS514P1032-10
The parts are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. After the Unit Price date, new price data is applicable. Prices are in United States
dollars. Terms: Net 30 days.
REFERENCE THIS SERVICE BULLETIN AND SUBMIT YOUR PURCHASE ORDER BY ONE OF
THE METHODS THAT FOLLOW:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
B. Industry Support Information
Boeing warranty remedies are available for 767 airplanes in warranty as of October 18, 2005. For
inspection task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to
Boeing Commercial Airplanes Group - Warranties. If the condition described in this service bulletin is
found during the inspection for airplanes in warranty as of that date and additional task hours, parts,
and/or special tools are required, send a warranty claim to Boeing Commercial Airplanes Group -
Warranties. Please refer to this service bulletin number and reference the airplane variable number(s)
in your purchase order.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
31 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 32

C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: The quantity (QTY) of parts shown below represent the number of existing parts installed
on each airplane. The quantity (QTY) of new parts necessary to accomplish this change
may vary based upon the findings of the detailed inspection outlined in Paragraph 3.B.,
Work Instructions.
Group 1:
NOTESEXISTING PART
NUMBER
NAMEQTYNEW PART
NUMBER
(a), (b), (c)411T3045-3
(411T3045-5
optional)
HINGE ASSEMBLY2411T3045-13
(a), (b), (c)411T3117-2RUB STRIP2411T3117-3
(a), (b), (c)NAS514P1032-8SCREW2NAS514P1032-10
(a) Discard the existing part.
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
Group 2-6, 9-10, 12, 15:
NOTESEXISTING PART
NUMBER
NAMEQTYNEW PART
NUMBER
(a), (b), (c)411T3045-3
(411T3045-5
optional)
HINGE ASSEMBLY4411T3045-13
(a), (b), (c)411T3117-2RUB STRIP4411T3117-3
(a) Discard the existing part.
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
Group 7-8, 11, 13-14, 16, 20:
NOTESEXISTING PART
NUMBER
NAMEQTYNEW PART
NUMBER
(a), (b), (c)411T3045-5
(411T3045-3
optional)
HINGE ASSEMBLY6411T3045-13
(a), (b), (c)411T3117-2RUB STRIP6411T3117-3
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
32 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 33

Group 7-8, 11, 13-14, 16, 20:
NOTESEXISTING PART
NUMBER
NAMEQTYNEW PART
NUMBER
(a) Discard the existing part.
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
Group 17-19:
NOTESEXISTING PART
NUMBER
NAMEQTYNEW PART
NUMBER
(a), (b), (c)411T3045-7HINGE ASSEMBLY1411T3045-15B
(a), (b), (c)411T3117-2RUB STRIP1411T3117-3
(a), (b)411T3320-101PAD1411T3320-101
(a) Discard the existing part.
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a)TEMPERATURE-RESISTANT,
FUEL, PRESSURE, AND
WEATHER SEALANT
1 OZBMS5-44 Class B
(BMS5-26 Class B,
BMS5-45 Class B
OPTIONAL)
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for
supplier data.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane. The quantity of the Component part is the number of
parts used on the next higher assembly.
NOTE: The quantity (QTY) of parts shown below represent the number of existing parts installed
on each airplane. The quantity (QTY) of parts modified and re-identified may vary based
upon the findings of the detailed inspection outlined in Paragraph 3.B., Work Instructions.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
33 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 34

Group 1:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-33B
(b)
CEILING
ASSEMBLY
411T3036-19A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 2, 10:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-607C
(b)
CEILING
ASSEMBLY
411T3036-601B
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-608C
(b)
CEILING
ASSEMBLY
411T3036-602B
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-609C
(b)
CEILING
ASSEMBLY
411T3036-603B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-610C
(b)
CEILING
ASSEMBLY
411T3036-604B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
34 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 35

Group 3, 9:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-607B
(b)
CEILING
ASSEMBLY
411T3036-601A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-608B
(b)
CEILING
ASSEMBLY
411T3036-602A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-609B
(b)
CEILING
ASSEMBLY
411T3036-603A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-610B
(b)
CEILING
ASSEMBLY
411T3036-604A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 4:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-607E
(b)
CEILING
ASSEMBLY
411T3036-601D
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-608E
(b)
CEILING
ASSEMBLY
411T3036-602D
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
35 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 36

Group 4:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-609E
(b)
CEILING
ASSEMBLY
411T3036-603D
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-610E
(b)
CEILING
ASSEMBLY
411T3036-604D
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 5:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-15B
(b)
CEILING
ASSEMBLY
411T3310-1A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-16B
(b)
CEILING
ASSEMBLY
411T3310-2A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-9B (b)CEILING
ASSEMBLY
411T3310-5A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-10B
(b)
CEILING
ASSEMBLY
411T3310-6A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
36 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 37

Group 5:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 6:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-9B (b)CEILING
ASSEMBLY
411T3310-5A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-10B
(b)
CEILING
ASSEMBLY
411T3310-6A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-11B
(b)
CEILING
ASSEMBLY
411T3310-7B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-12B
(b)
CEILING
ASSEMBLY
411T3310-8B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
37 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 38

Group 7:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-607C
(b)
CEILING
ASSEMBLY
411T3036-601B
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-608C
(b)
CEILING
ASSEMBLY
411T3036-602B
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-609C
(b)
CEILING
ASSEMBLY
411T3036-603B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-610C
(b)
CEILING
ASSEMBLY
411T3036-604B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-611D
(b)
CEILING
ASSEMBLY
411T3036-605C
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-612D
(b)
CEILING
ASSEMBLY
411T3036-606C
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
38 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 39

Group 8:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-607B
(b)
CEILING
ASSEMBLY
411T3036-601A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-608B
(b)
CEILING
ASSEMBLY
411T3036-602A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-609B
(b)
CEILING
ASSEMBLY
411T3036-603A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-610B
(b)
CEILING
ASSEMBLY
411T3036-604A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-611B
(b)
CEILING
ASSEMBLY
411T3036-605A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-612B
(b)
CEILING
ASSEMBLY
411T3036-606A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
39 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 40

Group 11, 13:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3036-607E
(b)
CEILING
ASSEMBLY
411T3036-601D
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-608E
(b)
CEILING
ASSEMBLY
411T3036-602D
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-609E
(b)
CEILING
ASSEMBLY
411T3036-603D
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-610ECEILING
ASSEMBLY
411T3036-604D
(b)
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-611E
(b)
CEILING
ASSEMBLY
411T3036-605D
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3036-612ECEILING
ASSEMBLY
411T3036-606D
(b)
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
40 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 41

Group 15:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-15C
(b)
CEILING
ASSEMBLY
411T3310-1B
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-16C
(b)
CEILING
ASSEMBLY
411T3310-2B
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-9C (b)CEILING
ASSEMBLY
411T3310-5B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-10C
(b)
CEILING
ASSEMBLY
411T3310-6B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 16:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-13B
(b)
CEILING
ASSEMBLY
411T3310-3A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-14B
(b)
CEILING
ASSEMBLY
411T3310-4A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
41 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 42

Group 16:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-9B (b)CEILING
ASSEMBLY
411T3310-5A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-10B
(b)
CEILING
ASSEMBLY
411T3310-6A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-11B
(b)
CEILING
ASSEMBLY
411T3310-7B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-12B
(b)
CEILING
ASSEMBLY
411T3310-8B
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 17:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3291-34B
(b)
CEILING
ASSEMBLY
411T3291-2
(a), (c)411T3045-15B
(b)
HINGE
ASSEMBLY
1411T3045-7
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
42 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 43

Group 18:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3291-36B
(b)
CEILING
ASSEMBLY
411T3291-24
(a), (c)411T3045-15B
(b)
HINGE
ASSEMBLY
1411T3045-7
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 19:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3291-35B
(b)
CEILING
ASSEMBLY
411T3291-33
(a), (c)411T3045-15B
(b)
HINGE
ASSEMBLY
1411T3045-7
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
Group 20:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-15B
(b)
CEILING
ASSEMBLY
411T3310-1A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-16B
(b)
CEILING
ASSEMBLY
411T3310-2A
(a), (c)411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
43 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 44

Group 20:
NotesNew Part
Number
NameQTYComponent Part
Number
Existing Part
Number
(a), (c)411T3310-13B
(b)
CEILING
ASSEMBLY
411T3310-3A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-14B
(b)
CEILING
ASSEMBLY
411T3310-4A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-9B (b)CEILING
ASSEMBLY
411T3310-5A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a), (c)411T3310-10B
(b)
CEILING
ASSEMBLY
411T3310-6A
411T3045-13 (b)HINGE
ASSEMBLY
1411T3045-3
(411T3045-5
OPTIONAL)
(a) Make the change given in this service bulletin
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
To get the parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: The quantity (QTY) of parts shown below represent the number of existing parts installed on
each airplane. The quantity (QTY) of new parts necessary to accomplish this change may
vary based upon the findings of the detailed inspection outlined in Paragraph 3.B., Work
Instructions.
Group 1:
QTYNamePart Number
2HINGE ASSEMBLY411T3045-13
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
44 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 45

Group 1:
QTYNamePart Number
2RUB STRIP411T3117-3
2SCREWNAS514P1032-10
Group 2-6, 9-10, 12, 15:
QTYNamePart Number
4HINGE ASSEMBLY411T3045-13
4RUB STRIP411T3117-3
Group 7-8, 11, 13-14, 16, 20:
QTYNamePart Number
6HINGE ASSEMBLY411T3045-13
6RUB STRIP411T3117-3
Group 17-19:
QTYNamePart Number
1HINGE ASSEMBLY411T3045-15B
1RUB STRIP411T3117-3
1PAD411T3320-101
E. Special Tooling - Price and Availability
Boeing can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this Service
Bulletin. Send a Purchase Order to the Director of Spares. Give this service bulletin number and the
date the tools will be used.
PURCHASE DATA:
Unit Price thru
December 31,
2008
NameTool/Kit Number
$7.80GO/NO GO PLUG GAUGE
ASSEMBLY
STP8703GP-10
The kits are subject to the terms and conditions of the Boeing standard purchase order
acknowledgement. After the Price date, new price data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
Reference this service bulletin number and submit purchase order by one of the methods that follow:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
45 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 46

1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
(Service Bulletin 767-25-0477)
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
46 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 47

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Torque limits to tighten nuts and bolts are given in 767-200 SRM 51-00-00,
767-300 SRM 51-00-00, 767-300F SRM 51-00-00, or 767-400 SRM 51-00-00.
5. For approved fastener and process material substitutions, refer to 767-200 SRM
51-00-00, 767-300 SRM 51-00-00, 767-300F SRM 51-00-00, or 767-400 SRM
51-00-00. Alternate fasteners are given in 767-200 SRM 51-00-00, 767-300 SRM
51-00-00, 767-300F SRM 51-00-00, or 767-400 SRM 51-00-00 and Boeing Drawing
012W6100.
6. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements.
7. If the length of any fastener specified in this service bulletin does not meet the
installation standards given in SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in SRM Chapter 51 may be used.
8. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "as
given in" are included in the instruction, the procedure in the Boeing document must
be used.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
47 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 48

B. WORK INSTRUCTIONS
Group 1:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 1.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 6.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 6.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 23.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 6.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 23.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-200 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
48 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 49

Group 2, 10:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 7.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 7.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 24.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 7.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 24.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-200 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
49 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 50

Group 3, 9:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 8.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 8.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 25.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 8.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 25.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-200 SRM 51-10-02
or 767-300 SRM 51-10-02 as accepted procedures.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
50 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 51

Group 4:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 9.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 9.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 26.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 9.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 26.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-200 SRM 51-10-02
or 767-300 SRM 51-10-02 as accepted procedures.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
51 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 52

Group 5:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 10.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 10.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 27.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 10.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 27.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-200 SRM 51-10-02
or 767-300 SRM 51-10-02 as accepted procedures.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
52 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 53

Group 6:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 11.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 11.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 28.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 11.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 28.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-200 SRM 51-10-02
or 767-300 SRM 51-10-02 as accepted procedures.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
53 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 54

Group 7:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 3.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 12.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 12.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 29.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 12.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 29.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
54 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 55

Group 8:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 3.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 13.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 13.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 30.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 13.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 30.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
55 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 56

Group 11, 13:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 3.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 14.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 14.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 31.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 14.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 31.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
56 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 57

Group 12:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 15.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 15.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 32.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 15.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 32.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
57 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 58

Group 14:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 3.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 16.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 16.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 33.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly as given
in Appendix B.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 16.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 33.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
58 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 59

Group 15:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 2.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 17.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 17.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 33.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly. Refer
to Appendix B as an accepted procedure.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 17.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 33.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
59 of 367
BOEING SERVICE BULLETIN 767-25-0477

### Page 60

Group 16:
1. Remove the lowered ceiling panels and access the movable ceiling panel assembly. Refer to 767
AMM 25-22-02 as an accepted procedure.
2. Do a detailed inspection of the movable ceiling panel assembly and entryway door ceiling area as
given in Figure 3.
a. If the finished crimp size is acceptable, re-partmark the hinge and movable panel assemblies
as given in Figure 18.
b. If the finished crimp size is too small but no cracks or missing material are found, re-partmark
the hinge and movable panel assemblies as given in Figure 18.
c. If the finished crimp size is too small and cracks and/or missing material are found, replace
the hinge assembly as given in Figure 34.
d. If the hinge pin has migrated beyond the crimp with no deformation (i.e. bending, cracking,
breakage, missing material) and no wire damage and/or tie-rod chafing is visible, do the
following:
(1) Push the hinge pin back into the hinge assembly and crimp the hinge assembly. Refer
to Appendix B as an accepted procedure.
(2) Re-partmark the hinge and movable panel assemblies as given in Figure 18.
e. If the hinge pin has migrated beyond the crimp and shows deformation (i.e. bending, cracking,
breakage, missing material) and wire damage and/or tie-rod chafing is visible, do the following:
(1) Replace the hinge assembly as given in Figure 34.
(2) Repair tie-rod chafing caused by the migrating hinge pin. Refer to 767-300 SRM 51-10-02
as an accepted procedure.
(3) Remove electrical power from the airplane before repairing any damaged wires. Refer
to 767 AMM 24-22-00 as an accepted procedure.
(4) Repair wire damage caused by the migrating hinge pin. Refer to SWPM 20-00-14, SWPM
20-10-13, and SWPM 20-10-18 as accepted procedures.
(5) Restore electrical power to the airplane. Refer to 767 AMM 24-22-00 as an accepted
procedure.
3. Close the movable ceiling panel assembly and install the lowered ceiling panels. Refer to 767
AMM 25-22-02 as an accepted procedure.
4. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
August 27, 2009
767-25-0477
60 of 367
BOEING SERVICE BULLETIN 767-25-0477

The text continues at https://openairdocs.org/service-documents/boeing/sb-767-25-0477/file/52c2cc370d63.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
