# Boeing Special Attention Service Bulletin 767-25-0539: Revision 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2136; AD 2025-01-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 767-25-0539](https://openairdocs.org/service-documents/boeing/sb-767-25-0539.md)
- Title as filed: SB-767-25-0539 Rev02
- Pages: 41
- PDF: https://openairdocs.org/files/sha256/77/17/77173fbb5b7cb2fe10c4ddeb8f253a316d8ab0f9bb2c56f5dd243a0a7f36a5cc
- Page: https://openairdocs.org/service-documents/boeing/sb-767-25-0539/file/77173fbb5b7c

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-25-0539
Original Issue: January 09, 2014
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Manual Override Cable Inspection and Adjustment
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2014 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
1 of 41
4.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
2 of 41
BOEING SERVICE BULLETIN 767-25-0539
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 20
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 23
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 23
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
FIGURE 1: FLIGHT COMPARTMENT SEATS - SEAT IDENTIFICATION . . . . . . . . . . . . . . . . 40
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
3 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
4 of 41
BOEING SERVICE BULLETIN 767-25-0539
BLANK PAGE

### Page 5

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 767-25-0539Original Issue: January 09, 2014
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Manual Override Cable Inspection and Adjustment
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-14-13 is related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Effects of this Revision on airplanes on which the Original Issue or Revision 1 was previously done:
ActionConditionGroup
Do "Captain's and First Officer's Seats Inspection
and Manual Override Cable Adjustment with any
Ipeco seat part number 3A090-0078-03-1,
3A090-0078-04-1, 3A090-0078-05-1, 3A258-
0007-01-1Z, 3A258-0008-01-1Z, 3A258-0041-
01-1Z or 3A258-0042-01-1Z" in accordance with
Work Instructions.
Airplanes that have been inspected and have
done all applicable corrective actions for the
installed Captain's and First Officer's seats
that were identified in the Original Issue or
Revision 1 of this service bulletin.
Group 1, Con-
figuration 2
REASON FOR REVISION
This revision is sent to add new requirements for Ipeco seat part numbers 3A090-0078-03-1, 3A090-0078-04-1,
3A090-0078-05-1, 3A258-0007-01-1Z, 3A258-0008-01-1Z, 3A258-0041-01-1Z and 3A258-0042-01-1Z. This
revision is also sent to list newer issue numbers for each concurrent supplier service bulletin, and to add
conditional information for Ipeco seats that used specific revisions of Ipeco Component Maintenance Manuals
(CMMs) to do manual override cable maintenance.
These sections were changed:
1. Summary, Background; changed information, added Service Related Problem (SRP) reference, and
changed the AD related information in the planning table.
2. Summary, Action; added applicability, added Engineering Change Memo reference, changed and
added information.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
5 of 41

### Page 6

3. Summary, Compliance; changed information and added AD information.
4. Summary, Illustration; changed and added information.
5. Paragraph 1.A.1., Airplanes; added Configurations for Group 1, changed and added information, listed
specific line numbers and line number ranges and replaced the note.
6. Paragraph 1.A.2., Spares Affected; added part numbers.
7. Paragraph 1.B., Concurrent Requirements; added applicability, changed to give the newest issue of
each supplier service bulletin, corrected a typographical error in footnote (c), changed footnotes (a)
thru (f), added footnotes (g) and (h).
8. Paragraph 1.C., Reason; changed information, added SRP reference, and added Revision 2 information.
9. Paragraph 1.D., Description; added applicability, changed and added information, and added Revision
2 information.
10. Paragraph 1.E., Compliance; added and changed information, and added applicability.
11. Paragraph 1.F., Approval; changed information, added Alternative Method Of Compliance (AMOC)
paragraph.
12. Paragraph 1.G., Manpower; added applicability, added a footnote and changed information.
13. Paragraph 1.J.1., Existing Data; added references.
14. Paragraph 2.C.2., Parts and Materials Supplied by the Operator; changed information.
15. Paragraph 3.B., Work Instructions:
a. added Ipeco and Boeing seat part numbers
b. added Ipeco CMMs and listed newer issue numbers for each Ipeco service bulletin
c. added conditional information for manual override cable maintenance history
d. changed the list to identify 'Captain's and First Officer's Seats Inspection and Manual Override
Cable Adjustment' and added a list for 'Captain's and First Officer's Seats Inspection and Manual
Override Cable Adjustment with Ipeco seat part number 3A090-0078-03-1, 3A090-0078-04-1,
3A090-0078-05-1, 3A258-0007-01-1Z, 3A258-0008-01-1Z, 3A258-0041-01-1Z or 3A258-0042-01-1Z'
e. changed the 'serviceable seat' definition for part number series 3A090 and 3A258 seats and added
applicability
f. changed an instruction, corrected an instruction, added information, and added applicability
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
6 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 7

REVISION HISTORY
January 09, 2014Original Issue:
July 17, 2018Revision 1:
January 27, 2023Revision 2:
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
7 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 8

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
8 of 41
BOEING SERVICE BULLETIN 767-25-0539
BLANK PAGE

### Page 9

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 767-25-0539Original Issue: January 09, 2014
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Manual Override Cable Inspection and Adjustment
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will make sure that Captain's and First Officer's seats do not have
un-commanded movement due to an improperly adjusted cable for the manual release lever. If this service
bulletin is not done, the manual control lever cable could be incorrectly adjusted which could result in its clutch
mechanism not engaging correctly and cause an un-commanded seat movement. An un-commanded seat
movement during a critical part of a flight, such as take-off or landing could cause a flight control obstruction or
unintended flight control input which could result in the loss of the ability to control the airplane.
A 747 operator reported that during a takeoff, the First Officer's seat unlocked from its seat tracks and moved
aft. The First Officer was unable to control the airplane and the captain took over the controls to avoid a rejected
takeoff. The unlocking of the seat from the seat tracks was caused by actuator damage which was a result of
incorrect adjustment of the seats manual release lever cable, allowing the clutch mechanisms to only partially
engage. Because 767 airplanes use the same seats in the flight compartment, Boeing has issued this service
bulletin to do a one-time inspection, and if necessary an adjustment, in accordance with an Ipeco Service Bulletin.
Three Ipeco Service Bulletins have been issued to account for different part number seats installed. Because
of in-service seat interchangeability, operators are told to inspect the part number of the seats installed and use
the applicable Ipeco Service Bulletin.
This service bulletin gives instructions to find the identification of the installed Captain's and First Officer's seats,
and to do an inspection, and if necessary, an adjustment, of each affected seats' fore/aft manual control lever
and vertical manual control lever in accordance with an Ipeco Service Bulletin. The inspection, and if necessary,
the adjustment, of the manual control levers of the Captain's and First Officer's seats, will make sure that the
seats do not have un-commanded seat movement due to improperly adjusted fore/aft and vertical manual control
levers.
Boeing Service Related Problem (SRP) 767-SRP-25-0320 and 767-SRP-25-0418 are related to this service
bulletin.
Boeing Fleet Team Digest (FTD) 767 FTD 25-13003 is related to this service bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
9 of 41

### Page 10

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected
(Flight Crew Operations Manual and/or
FAA Approved Airplane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR B12900-277R)
Find the part number of the installed Captain's and First Officer's seats. If specific seat part numbers are found,
find the serial number of those seats, and find their manual override cable maintenance history. For each affected
Captain's and First Officer's seat, do a Detailed Inspection of the fore/aft manual control lever and the vertical
manual control lever on each seat for looseness in accordance with the applicable Ipeco Service Bulletin. If a
control lever inspection is not within limits, remove the seat and install a serviceable seat. Do an operational
test of each adjusted seat.
NOTE: A serviceable seat in this service bulletin is defined as part number 3A258-0041-01-2 (Captain's) and
part number 3A258-0042-01-2 (First Officer's), or it is a seat that has done the inspections and all
applicable corrective actions in accordance with the applicable Ipeco service bulletin. Or, it is a seat
that has completed manual override cable maintenance done on it in accordance with Ipeco Component
Maintenance Manual (CMM) 25-10-87, Revision 28 or later, or in accordance with Ipeco CMM 25-11-38,
Revision 21 or later.
EFFECTIVITY
767-200/300/300F/400ER Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-14-13 is related to this service bulletin.
The effective date of AD 2019-14-13 is September 12, 2019.
Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
10 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 11

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and adjustment given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
11 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 12 (OCR)

BOEING SERVICE BULLETIN 767-25-0539
FIRST OFFICER'S
SEAT  FIND THE PART NUMBER OF THE INSTALLED
CAPTAIN'S AND FIRST OFFICER'S SEATS.
FIND THE SERIAL NUMBER OF SPECIFIC
SEAT PART NUMBERS  , AND FIND THEIR MANUAL
OVERRIDE CABLE MAINTENANCE HISTORY.
FOR EACH AFFECTED CAPTAIN'S AND
-IRST OFFICER'S SEAT, DO A
DETAILED INSPECTION OF THE
VERTICAL MANUAL CONTROL LEVER
FOR LOOSENESS IN ACCORDANCE
WITH THE APPLICABLE IPECO
SERVICE BULLETIN
IF A CONTROL LEVER INSPECTION IS
NOT WITHIN LIMITS, REMOVE THE
SEAT AND INSTALL A SERVICEABLE
SEAT. DO AN OPERATIONAL TEST OF
EACH ADJUSTED SEAT.
-WD
CAPTAIN'S SEAT
FIRST OFFICER'S SEAT OPPOSITE
(TYPICAL)
(RIGHT SIDE VIEW)
FWD
CAPTAIN'S SEAT
FIRST OFFICER'S SEAT OPPOSITE
(TYPICAL
(LEFT SIDE VIEW
FOR EACH AFFECTED CAPTAIN'S AND
FIRST OFFICER'S SEAT, DO A DETAILED
INSPECTION OF THE FORE/AFT MANUAL
CONTROL LEVER FOR LOOSENESS IN
ACCORDANCE WITH THE APPLICABLE
IPECO SERVICE BULLETIN. IF A CONTROL
LEVER INSPECTION IS NOT WITHIN
LIMITS, REMOVE THE SEAT AND INSTALL
A SERVICEABLE SEAT. DO AN
SEAT.  OPERATIONAL TEST OF EACH ADJUSTED  2304527
Original Issue: January 09, 2014
Revision 2: January 27, 2023  767-25-0539
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  12 of 41

### Page 13

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-25-0539
Original Issue: January 09, 2014
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT / FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Manual Override Cable Inspection and Adjustment
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624T001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This bulletin is applicable to 767-200, 767-300, 767-300F, 767-400ER Airplane(s), line number(s)
161, 170, 172-173, 175-182, 185, 190, 197, 199, 212, 217-218, 222-223, 229, 233-234, 236, 245,
250, 252, 254, 257, 262-263, 269, 271, 273-276, 279-280, 282, 285, 289-291, 294-295, 297,
300-301, 303, 305-310, 314-315, 323-325, 330, 332, 334, 336-340, 352, 358-359, 375, 377, 379,
381-383, 389-390, 393, 395, 400-401, 406-407, 412, 415-416, 429, 432, 436, 439-440, 455, 458,
463, 465-466, 470-471, 478, 486, 501-502, 508, 510-511, 515-516, 518-520, 522, 525, 530,
537-539, 543-544, 546, 551, 553, 556, 562, 567, 569, 573, 587, 589, 592, 595-597, 599, 604-607,
609, 616, 620, 625, 627, 629, 633, 635, 639, 644-645, 647, 650-651, 656, 658, 661, 668-669, 684,
686, 693, 712, 714, 722, 738, 758, 768-770, 773-774, 781, 787-791, 794-795, 797, 799, 801,
803-805, 807, 809-811, 813-816, 818-821, 823-827, 829-830, 832-833, 835-836, 838-839, 842-843,
845, 847, 849, 851, 855-856, 859-860, 862-886, 888, 895, 902-903, 905, 911-912, 914-915, 917,
919-921, 924-925, 927, 929-932, 935, 937-939, 941-943, 946-947, 950-954, 956-960, 963-964,
966, 969, 971, 974-978, 980-982, 993-1001, 1007, 1009-1010, 1012-1013, 1015, 1017-1019,
1021, 1023, 1027, 1032, 1036, 1039, 1041, 1047, 1050, 1054, 1058, 1060-1064, 1068, 1070-1090,
1093-1097, 1099, 1101, 1103, 1105-1106, 1108, 1110, 1112, 1115, 1118, 1121, 1123, 1125, 1127,
1130, 1133, 1136, 1138, 1140-1142, 1144, 1146, 1148, 1150, 1152-1153, 1155, 1157, 1159, 1161,
1163, 1165, 1167, 1169, 1171, 1173, 1175, 1177, 1179-1180, 1182-1183, 1185-1187, 1189-1191,
1193-1195, 1197-1199, 1201, 1203-1204, 1206, 1208-1209, 1211-1212, 1214-1215, 1217-1218,
1220-1222, 1224-1225, 1227-1229, 1231-1233, 1235, 1237, 1239-1240, 1242, 1244-1245, 1247,
1249, 1251, 1253, 1255-1256, 1258, 1260, 1262-1263, 1265-1266, 1268, 1270, 1272, 1274, 1276,
1278-1279, 1281, 1283, 1285, 1287, 1289, 1291-1292, 1294, 1296, 1298, 1300, 1302, 1304-1305,
1307, 1309, 1311, 1313, 1315-9999 in 1 Group(s). Where the effectivity is presented with hyphens
between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers
1-9 means line numbers 1 through 9 inclusive.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
13 of 41

### Page 14

The Variable Numbers and Group information for the applicable airplanes is given below. Refer
to PRR B12900-277R for data about this change.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
DESCRIPTIONCONFIGURATIONGROUP
767-200/300/300F/400ER Airplanes equipped with powered Ipeco
Captain's and First Officer's seats part number series 3A090 and
3A258.
-1
Airplanes that have not done the Original Issue or Revision 1 of this
service bulletin.
1
Airplanes that have done the Original Issue or Revision 1 of this
service bulletin.
2
Airplane Models:
767-200, 767-300, 767-300F, 767-400ER
GroupVariable Number
1VA713 - VA719
1VE121 - VE126
1VE141 - VE152
1VF071 - VF072
1VF091 - VF093
1VF161 - VF162
1VF251
1VK081 - VK113
1VK131 - VK133
1VK145 - VK148
1VK161 - VK164
1VK171
1VL806 - VL807
1VL871 - VL873
1VL891 - VL900
1VN151 - VN158
1VN163 - VN168
GroupVariable Number
1VN191 - VN198
1VN211 - VN212
1VN221 - VN225
1VN231 - VN234
1VN301 - VN314
1VN671 - VN672
1VN681 - VN691
1VN931 - VN936
1VQ001 - VQ021
1VQ071 - VQ086
1VR051 - VR060
1VR084
1VR086 - VR089
1VR106 - VR109
1VR251
1VR260
1VR293 - VR308
GroupVariable Number
1VR401
1VR421 - VR423
1VR426
1VS136 - VS137
1VS231
1VS261 - VS263
1VS273 - VS274
1VS336 - VS337
1VS391 - VS392
1VS466 - VS472
1VS546 - VS549
1VS701 - VS736
1VS861
1VS911 - VS912
1VS916
1VS931 - VS933
1VS951 - VS954
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
14 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 15

GroupVariable Number
1VS961 - VS969
1VS971 - VS975
1VS981 - VS984
1VT021
1VT031 - VT033
GroupVariable Number
1VT501
1VT521 - VT523
1VT531 - VT533
1VT541 - VT546
1VT551 - VT552
GroupVariable Number
1VT556 - VT686
1VT731 - VT735
1VT737
1VW851
--
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
3A090-0025-01-1
3A090-0026-01-1
3A090-0077-01-1
3A090-0077-02-1
3A090-0078-01-1
3A090-0078-02-1
3A090-0078-03-1
3A090-0078-04-1
3A090-0078-05-1
3A258-0007-01-1
3A258-0007-01-1Z
3A258-0008-01-1
3A258-0008-01-1Z
3A258-0041-01-1
3A258-0041-01-1Z
3A258-0042-01-1
3A258-0042-01-1Z
B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
Captain's and First Officer's seat manual
override cable adjustment check.
Ipeco SB 098-25-03, Issue 1 or Issue 2 or
Issue 3
Ipeco Holdings Ltd
(a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
15 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 16

DescriptionService BulletinCompany
Captain's and First Officer's seat manual
override cable adjustment check.
Ipeco SB 210-25-04, Issue 1 or Issue 2 or
Issue 3
Ipeco Holdings Ltd
(c)(d)
Captain's and First Officer's seat manual
override cable adjustment check.
Ipeco SB 258-25-08, Issue 4 or Issue 5
(e)(f)
Ipeco Holdings Ltd
Captain's and First Officer's seat manual
override cable adjustment check.
Ipeco SB 258-25-08, Issue 6
(g)(h)
IpecoHoldings Ltd
(a) Applicable to Captain's seat part number 3A090-0025-01-1.
(b) Applicable to First Officer's seat part number 3A090-0026-01-1.
(c) Applicable to Captain's seat part numbers 3A090-0077-01-1and 3A090-0077-02-1.
(d) Applicable to First Officer's seat part numbers 3A090-0078-01-1, 3A090-0078-02-1, 3A090-0078-03-
1, 3A090-0078-04-1 and 3A090-0078-05-1.
(e) Applicable to Captain's seat part numbers 3A258-0007-01-1 and 3A258-0041-01-1.
(f) Applicable to First Officer's seat part numbers 3A258-0008-01-1 and 3A258-0042-01-1.
(g) Applicable to Captain's seat part numbers 3A258-0007-01-1, 3A258-0007-01-1Z, 3A258-0041-01-1
and 3A258-0041-01-1Z.
(h) Applicable to First Officer's seat part numbers 3A258-0008-01-1, 3A258-0008-01-1Z, 3A258-0042-
01-1 and 3A258-0042-01-1Z.
C. Reason
Accomplishment of this service bulletin will make sure that Captain's and First Officer's seats do not
have un-commanded movement due to an improperly adjusted cable for the manual release lever. If
this service bulletin is not done, the manual control lever cable could be incorrectly adjusted which
could result in its clutch mechanism (dogs) not engaging correctly and cause an un-commanded seat
movement. An un-commanded seat movement during a critical part of a flight, such as take-off or
landing could cause a flight control obstruction or unintended flight control input which could result in
the loss of the ability to control the airplane.
A 747 operator reported that during a takeoff, the First Officer's seat unlocked from it's seat tracks and
moved aft. The First Officer was unable to control the airplane and the captain took over the controls
to avoid a rejected takeoff. The unlocking of the seat from the seat tracks was caused by actuator
damage which was a result of incorrect adjustment of the seats manual release lever cable, allowing
the clutch dogs to only partially engage. Because 767 airplanes use the same seats in the flight
compartment, Boeing has issued this service bulletin to do a one-time inspection, and if necessary an
adjustment, in accordance with an Ipeco Service Bulletin. Three Ipeco Service Bulletins have been
issued to account for different part number seats installed. Because of in-service seat interchangeability,
operators are told to inspect the part number of the seats installed and use the applicable Ipeco Service
Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
16 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 17

This service bulletin gives instructions to find the identification of the installed Captain's and First
Officer's seats, and to do an inspection, and if necessary, an adjustment, of each affected seats' fore/aft
manual control lever and vertical manual control lever in accordance with an Ipeco Service Bulletin.
The inspection, and if necessary, the adjustment, of the manual control levers of the Captain's and
First Officer's seats, will make sure that the seats do not have un-commanded seat movement due to
improperly adjusted fore/aft and vertical manual control levers.
Boeing Service Related Problem (SRP) 767-SRP-25-0320 and 767-SRP-25-0418 are related to this
service bulletin.
Boeing Fleet Team Digest (FTD) 767 FTD 25-13003 is related to this service bulletin.
Revision 1 was sent to add delivered 767 airplanes that had Ipeco powered Captain's and First Officer's
seats installed during production or in retrofit, and all future deliveries with Ipeco powered Captain's
and First Officer's seats to the effectivity of this service bulletin. This revision also adds instructions to
identify specific Captain's and First Officer's seat serial numbers for seat part numbers 3A258-0041-01-1
and 3A258-0042-01-1. And, seat part numbers 3A258-0041-01-2 and 3A258-0042-01-2 were added
to the Serviceable Seat definition. Airplane variable number VR260 is added because it is applicable
to Boeing service bulletin 767-25-0546, and airplane variable numbers VT551 and VT552 are added
because they are applicable to Boeing service bulletin 767-25-0556, the two of which install Ipeco
powered Captain's and First Officer's seats which are subsequently affected by this service bulletin.
Airplane variable number VR401 is added because it was not included in the Original Issue of this
service bulletin. Also, Captain's seat part number 3A090-0077-01-1 and First Officer's seat part number
3A090-0078-01-1, the two of which are specified in Ipeco SB 210-25-04, are added to this service
bulletin. First Officer's seat part numbers 3A090-0078-03-1 and 3A090-0078-05-1, the two of which
were reidentified back to First Officer's seat part number 3A090-0078-02-1, are removed from this
service bulletin.
Revision 2 is sent to add newer and the newest issues of the supplier service bulletins and to add
conditional information for Ipeco seats that used specific revisions of Ipeco Component Maintenance
Manuals (CMMs) to do manual override cable maintenance. Also, this revision is sent to add Ipeco
seat part numbers 3A258-0007-01-1Z, 3A258-0008-01-1Z, 3A258-0041-01-1Z and 3A258-0042-01-1Z
that are identified in Ipeco SB 258-25-08, Issue 6. Ipeco seat part numbers 3A090-0078-03-1 and
3A090-0078-05-1, that were removed at Revision 1, are added back in this service bulletin. Ipeco seat
part number 3A090-0078-04-1 is also added to this service bulletin. Compliance tasks for seat part
numbers added in this revision are given a new compliance time for all affected airplanes.
D. Description
Find the part number of the installed Captain's and First Officer's seats. If specific seat part numbers
are found, find the serial number of those seats, and find their manual override cable maintenance
history. For each affected Captain's and First Officer's seat, do a Detailed Inspection of the fore/aft
manual control lever and the vertical manual control lever on each seat for looseness in accordance
with the applicable Ipeco Service Bulletin. If a control lever inspection is not within limits, remove the
seat and install a serviceable seat. Do an operational test of each adjusted seat.
NOTE: A serviceable seat in this service bulletin is defined as part number 3A258-0041-01-2
(Captain's) and part number 3A258-0042-01-2 (First Officer's), or it is a seat with completed
inspections and all applicable corrective actions in accordance with the applicable Ipeco
service bulletin. Or, it is a seat with completed manual override cable maintenance in
accordance with Ipeco Component Maintenance Manual (CMM) 25-10-87, Revision 28 or
later, or in accordance with Ipeco CMM 25-11-38, Revision 21 or later.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
17 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 18

Effects of this Revision 2 on airplanes on which the Original Issue or Revision 1 was previously done:
ActionConditionGroup
Do "Captain's and First Officer's Seats Inspection
and Manual Override Cable Adjustment with
Ipeco seat part number 3A090-0078-03-1,
3A090-0078-04-1, 3A090-0078-05-1, 3A258-
0007-01-1Z, 3A258-0008-01-1Z, 3A258-0041-
01-1Z or 3A258-0042-01-1Z" in accordance with
Work Instructions.
Airplanes that have been inspected and have
done all applicable corrective actions for the
installed Captain's and First Officer's seats
that were identified in the Original Issue or
Revision 1 of this service bulletin.
Group 1, Con-
figuration 2
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212767-200, 767-300, 767-300F,
767-400ER
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-14-13 is related to this service
bulletin. The effective date of AD 2019-14-13 is September 12, 2019.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
Group 1, Configuration 1:
Boeing recommends that the "Captain's and First Officer's Seats Inspection and Manual Override Cable
Adjustment" given in this service bulletin be done within 72 months after the Original Issue date of this
service bulletin.
Boeing recommends that the "Captain's and First Officer's Seats Inspection and Manual Override Cable
Adjustment with Ipeco seat part number 3A090-0078-03-1, 3A090-0078-04-1, 3A090-0078-05-1,
3A258-0007-01-1Z, 3A258-0008-01-1Z, 3A258-0041-01-1Z or 3A258-0042-01-1Z" given in this service
bulletin be done within 36 months after the Revision 2 date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA
approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were
based on the airplane in its original Boeing delivery configuration or as modified by other approved
Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
18 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 19

In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the inspections,
adjustments and installation defined in SB 767-25-0539, Revision 2 as an alternative method of
compliance to accomplishing the inspections, adjustments and installation required by paragraph (g)
of AD 2019-14-13. All provisions of AD 2019-14-13 that are not specifically referenced in the above
statement remain fully applicable and must be complied with accordingly.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.050.051Open Access
0.200.201FIGURE 1(e)
0.500.501Removal of the Captain's Seat (a)
0.500.501Installation of the Captain's Seat (b)
0.500.501Removal of the First Officer's Seat (a)
0.500.501Installation of the First Officer's Seat (b)
0.250.251Operational Test of the Captain's Seat (c)
0.250.251Operational Test of the First Officer's Seat (c)
0.050.051Close Access
(d)(d)TOTAL FOR EACH AIRPLANE
(a) Only necessary if it is not possible to adjust the seat with the seat installed.
(b) Only necessary if the seat was removed.
(c) Only necessary if the seat was adjusted in accordance with the applicable Ipeco Service
Bulletin.
(d) The total task hours and elapsed hours are not given as the work necessary for each
airplane is variable.
(e) Only necessary if maintenance documentation cannot be used to find the identification
of the seat(s).
For affected seat(s), the time to do the inspection and adjustment in accordance with Ipeco SB
098-25-03, Ipeco SB 210-25-04 and Ipeco SB 258-25-08 is not included.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
19 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 20

H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR B12900-277R
b. Boeing Service Related Problem (SRP) 767-SRP-25-0320, 767-SRP-25-0418
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2019-14-13
d. Service Bulletin Index D624T001
e. 767 Aircraft Maintenance Manual (AMM) 25-11-01
f. 767 Fleet Team Digest (FTD) 25-13003
g. Ipeco Component Maintenance Manual (CMM) 25-10-78, 25-10-95, 25-11-26, 25-11-38
h. Ipeco Service Bulletin 098-25-03, 210-25-04, 258-25-08
NOTE: The supplier was told to send copies of the service bulletins to each operator.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
20 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 21

M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
21 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 22

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
22 of 41
BOEING SERVICE BULLETIN 767-25-0539
BLANK PAGE

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and adjustment given in this service
bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
No parts or materials are necessary to do the change in this service bulletin. But, parts and materials
in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator part
and material supply to make sure all necessary parts and materials are available.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
23 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 24

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
24 of 41
BOEING SERVICE BULLETIN 767-25-0539
BLANK PAGE

### Page 25

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for airframe maintenance tasks are included in Chapter 20 of 767
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
6. This service bulletin includes operational test procedures for the systems changed
by this service bulletin. More operational tests can possibly be necessary in
accordance with standard maintenance practices because of interruption to other
airplane systems.
7. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
8. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
25 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 26

9. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors,
magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures
may be required.
B. WORK INSTRUCTIONS
Group 1, Configuration 1:
Captain's and First Officer's Seats Inspection and Manual Override Cable Adjustment
1. Get access to the flight compartment.
2. Inspect to find the identification of the installed Captain's and First Officer's seats in accordance
with FIGURE 1 and do the action(s) that follow:
NOTE: If the identification of the Captain's and First Officer's seats that are installed on the
airplane can be determined by review of maintenance documentation, then it is not
necessary to do the FIGURE 1 inspection.
a. If the installed Captain's seat has the Ipeco part number given in the table below, no further
action is required for this seat.
Boeing Part NumberIpeco Part Number
S232T311-1033A258-0041-01-2
b. If the installed Captain's seat has an Ipeco part number given in the table below and that part
number does not have a serial number identified by the effectivity of Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Issue 6, no further action is required for this seat.
Boeing Part NumberIpeco Part Number
S232T311-1033A258-0041-01-1
c. If the installed Captain's seat has an Ipeco part number given in the table below, which also
has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 4 or Issue 5 or
Issue 6, and the manual override cable maintenance has been completed on the seat in
accordance with the Ipeco Component Maintenance Manual (CMM) given in the table below,
no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1033A258-0041-01-1
Revision 21 or later
d. If the installed Captain's seat has an Ipeco part number given in the table below and the
manual override cable maintenance has been completed on the seat in accordance with the
Ipeco CMM given in the table below, no further action is required for this seat.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
26 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 27

Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-10-95,S232T303-3033A090-0025-01-1
Revision 16 or later
CMM 25-10-78,S232T303-4033A090-0077-01-1
Revision 20 or laterS232T303-4053A090-0077-02-1
CMM 25-11-26,S232T311-33A258-0007-01-1
Revision 16 or later
e. If the installed Captain's seat has an Ipeco part number given in the table below, which also
has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 4 or Issue 5 or
Issue 6, and this seat has not done manual override cable maintenance, or the manual override
cable maintenance has been completed on the seat in accordance with an Ipeco CMM not
given in the table below, or the manual override cable maintenance history of this seat is not
known, do a Detailed Inspection of the fore/aft manual control lever and the vertical manual
control lever of the Captain's seat for looseness in accordance with Ipeco SB 258-25-08, Issue
4 or Issue 5 or Issue 6.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1033A258-0041-01-1
Revision 21 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6,
do the steps that follow:
(a) Remove the Captain's seat. Refer to 767 AMM 25-11-01 as an accepted procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0041-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6, no
more work is necessary on the Captain's seat.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
27 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 28

f. If the installed Captain's seat has an Ipeco part number given in the table below, and this seat
has not done manual override cable maintenance, or the manual override cable maintenance
has been completed on the seat in accordance with an Ipeco CMM not given in the table
below, or the manual override cable maintenance history of this seat is not known, do a
Detailed Inspection of the fore/aft manual control lever and the vertical manual control lever
of the Captain's seat for looseness in accordance with the applicable Ipeco Service Bulletin
given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26,Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Is-
sue 6
S232T311-33A258-0007-01-1
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6,
do the steps that follow:
(a) Remove the Captain's seat. Refer to 767 AMM 25-11-01 as an accepted procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0041-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6, no
more work is necessary on the Captain's seat.
g. If the installed Captain's seat has an Ipeco part number given in the table below, and this seat
has not done manual override cable maintenance, or the manual override cable maintenance
has been completed on the seat in accordance with an Ipeco CMM not given in the table
below, or the manual override cable maintenance history of this seat is not known, do a
Detailed Inspection of the fore/aft manual control lever and the vertical manual control lever
of the Captain's seat for looseness in accordance with the applicable Ipeco Service Bulletin
given in the table below.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
28 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 29

Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-10-95,Ipeco SB 098-25-03,
Issue 1 or Issue 2 or Is-
sue 3
S232T303-3033A090-0025-01-1
Revision 16 or later
CMM 25-10-78,Ipeco SB 210-25-04,
Issue 1 or Issue 2 or Is-
sue 3
S232T303-4033A090-0077-01-1
Revision 20 or laterS232T303-4053A090-0077-02-1
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in the applicable Ipeco Service Bulletin, do the steps
that follow:
(a) Remove the Captain's seat. Refer to 767 AMM 25-11-01 as an accepted procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with the applicable Ipeco
Service Bulletin with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as one that
has done the inspections and all applicable corrective actions in accordance
with the applicable Ipeco service bulletin. Or, it is a Captain's seat that has
done manual override cable maintenance in accordance with the applicable
Ipeco CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in the applicable Ipeco Service Bulletin, no more work is
necessary on the Captain's seat.
h. If the installed First Officer's seat has the Ipeco part number given in the table below, no further
action is required for this seat.
Boeing Part NumberIpeco Part Number
S232T311-1043A258-0042-01-2
i. If the installed First Officer's seat has the Ipeco part number given in the table below and that
part number does not have a serial number identified by the effectivity of Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Issue 6, no further action is required for this seat.
Boeing Part NumberIpeco Part Number
S232T311-1043A258-0042-01-1
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
29 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 30

j. If the installed First Officer's seat has an Ipeco part number given in the table below, which
also has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 4 or Issue
5 or Issue 6, and the manual override cable maintenance has been completed on the seat in
accordance with the Ipeco Component Maintenance Manual (CMM) given in the table below,
no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1043A258-0042-01-1
Revision 21 or later
k. If the installed First Officer's seat has an Ipeco part number given in the table below and the
manual override cable maintenance has been completed on the seat in accordance with the
Ipeco CMM given in the table below, no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-10-95,S232T303-3043A090-0026-01-1
Revision 16 or later
CMM 25-10-78,S232T303-4043A090-0078-01-1
Revision 20 or laterS232T303-4063A090-0078-02-1
CMM 25-11-26,S232T311-43A258-0008-01-1
Revision 16 or later
l. If the installed First Officer's seat has an Ipeco part number given in the table below, which
also has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 4 or Issue
5 or Issue 6, and this seat has not done manual override cable maintenance, or the manual
override cable maintenance has been completed on the seat in accordance with an Ipeco
CMM not given in the table below, or the manual override cable maintenance history of this
seat is not known, do a Detailed Inspection of the fore/aft manual control lever and the vertical
manual control lever of the First Officer's seat for looseness in accordance with Ipeco SB
258-25-08, Issue 4 or Issue 5 or Issue 6.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1043A258-0042-01-1
Revision 21 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6,
do the steps that follow:
(a) Remove the First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with Ipeco
SB 258-25-08, Issue 4 or Issue 5 or Issue 6, with the seat installed.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
30 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 31

(b) Install a serviceable First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as seat
part number 3A258-0042-01-2, or is a First Officer's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a First Officer's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6, no
more work is necessary on the First Officer's seat.
m. If the installed First Officer's seat has an Ipeco part number given in the table below, and this
seat has not done manual override cable maintenance, or the manual override cable
maintenance has been completed on the seat in accordance with an Ipeco CMM not given in
the table below, or the manual override cable maintenance history of this seat is not known,
do a Detailed Inspection of the fore/aft manual control lever and the vertical manual control
lever of the First Officer's seat for looseness in accordance with the applicable Ipeco Service
Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26,Ipeco SB 258-25-08,
Issue 4 or Issue 5 or Is-
sue 6
S232T311-43A258-0008-01-1
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6,
do the steps that follow:
(a) Remove the First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with the
applicable Ipeco Service Bulletin with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as seat
part number 3A258-0042-01-2, or is a First Officer's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a First Officer's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
31 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 32

(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 4 or Issue 5 or Issue 6, no
more work is necessary on the First Officer's seat.
n. If the installed First Officer's seat has an Ipeco part number given in the table below, and this
seat has not done manual override cable maintenance, or the manual override cable
maintenance has been completed on the seat in accordance with an Ipeco CMM not given in
the table below, or the manual override cable maintenance history of this seat is not known,
do a Detailed Inspection of the fore/aft manual control lever and the vertical manual control
lever of the First Officer's seat for looseness in accordance with the applicable Ipeco Service
Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-10-95,Ipeco SB 098-25-03,
Issue 1 or Issue 2 or Is-
sue 3
S232T303-3043A090-0026-01-1
Revision 16 or later
CMM 25-10-78,Ipeco SB 210-25-04,
Issue 1 or Issue 2 or Is-
sue 3
S232T303-4043A090-0078-01-1
Revision 20 or laterS232T303-4063A090-0078-02-1
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in the applicable Ipeco Service Bulletin, do the steps
that follow:
(a) Remove the First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with the
applicable Ipeco Service Bulletin with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as one
that has done the inspections and all applicable corrective actions in
accordance with the applicable Ipeco service bulletin. Or, it is a First Officer's
seat that has done manual override cable maintenance in accordance with
the applicable Ipeco CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in the applicable Ipeco Service Bulletin, no more work is
necessary on the First Officer's seat.
3. For each Captain's and First Officer's seat that had its fore/aft manual control lever adjusted, do
the operational test that follows. If the Captain's or First Officer's seat fails the test, do corrective
actions and repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
32 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 33

b. While sitting in the seat and with the seat back fully upright, operate the fore/aft manual control
lever.
c. Move the seat to the aft most position and release the control lever.
d. Make sure that the seat locks in the aft most position.
e. Operate the fore/aft manual control lever.
f. Move the seat to the forward most position and release the control lever.
g. Make sure that the seat locks in the forward most position.
4. For each Captain's and First Officer's seat that had its vertical manual control lever adjusted, do
the operational test that follows. If the Captain's or First Officer's seat fails the test, do corrective
actions and repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the vertical manual control
lever.
c. Make sure that the seat locks in the highest position.
d. Operate the vertical manual control lever.
e. Move the seat to the lowest position and release the control lever.
f. Make sure that the seat locks in the lowest position.
5. Put the airplane back to a serviceable condition.
Captain's and First Officer's Seats Inspection and Manual Override Cable Adjustment with Ipeco
seat part number 3A090-0078-03-1, 3A090-0078-04-1, 3A090-0078-05-1, 3A258-0007-01-1Z,
3A258-0008-01-1Z, 3A258-0041-01-1Z or 3A258-0042-01-1Z
1. Get access to the flight compartment.
2. Inspect to find the identification of the installed Captain's and First Officer's seats in accordance
with FIGURE 1 and do the action(s) that follow:
NOTE: If the identification of the Captain's and First Officer's seats that are installed on the
airplane can be determined by review of maintenance documentation, then it is not
necessary to do the FIGURE 1 inspection.
a. If the installed Captain's seat has an Ipeco part number given in the table below and that part
number does not have a serial number identified by the effectivity of Ipeco SB 258-25-08,
Issue 6, no further action is required for this seat.
Boeing Part NumberIpeco Part Number
S232T311-1033A258-0041-01-1Z
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
33 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 34

b. If the installed Captain's seat has an Ipeco part number given in the table below, which also
has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 6, and the manual
override cable maintenance has been completed on the seat in accordance with the Ipeco
Component Maintenance Manual (CMM) given in the table below, no further action is required
for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1033A258-0041-01-1Z
Revision 21 or later
c. If the installed Captain's seat has an Ipeco part number given in the table below and the
manual override cable maintenance has been completed on the seat in accordance with the
Ipeco CMM given in the table below, no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-26,S232T311-33A258-0007-01-1Z
Revision 16 or later
d. If the installed Captain's seat has an Ipeco part number given in the table below, which also
has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 6, and this seat
has not done manual override cable maintenance, or the manual override cable maintenance
has been completed on the seat in accordance with an Ipeco CMM not given in the table
below, or the manual override cable maintenance history of this seat is not known, do a
Detailed Inspection of the fore/aft manual control lever and the vertical manual control lever
of the Captain's seat for looseness in accordance with Ipeco SB 258-25-08, Issue 6.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1033A258-0041-01-1Z
Revision 21 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 6, do the steps that follow:
(a) Remove the Captain's seat. Refer to 767 AMM 25-11-01 as an accepted procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 258-25-08,
Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
34 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 35

NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0041-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 6, no more work is necessary
on the Captain's seat.
e. If the installed Captain's seat has an Ipeco part number given in the table below, and this seat
has not done manual override cable maintenance, or the manual override cable maintenance
has been completed on the seat in accordance with an Ipeco CMM not given in the table
below, or the manual override cable maintenance history of this seat is not known, do a
Detailed Inspection of the fore/aft manual control lever and the vertical manual control lever
of the Captain's seat for looseness in accordance with the applicable Ipeco Service Bulletin
given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26,Ipeco SB 258-25-08,
Issue 6
S232T311-33A258-0007-01-1Z
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 6, do the steps that follow:
(a) Remove the Captain's seat. Refer to 767 AMM 25-11-01 as an accepted procedure.
NOTE: Operators can choose not to remove the Captain's seat if there is sufficient
access to adjust the Captain's seat in accordance with Ipeco SB 258-25-08,
Issue 6, with the seat installed.
(b) Install a serviceable Captain's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable Captain's seat in this service bulletin is defined as seat part
number 3A258-0041-01-2, or is a Captain's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a Captain's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 6, no more work is necessary
on the Captain's seat.
f. If the installed First Officer's seat has the Ipeco part number given in the table below and that
part number does not have a serial number identified by the effectivity of Ipeco SB 258-25-08,
Issue 6, no further action is required for this seat.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
35 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 36

Boeing Part NumberIpeco Part Number
S232T311-1043A258-0042-01-1Z
g. If the installed First Officer's seat has an Ipeco part number given in the table below, which
also has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 6, and the
manual override cable maintenance has been completed on the seat in accordance with the
Ipeco Component Maintenance Manual (CMM) given in the table below, no further action is
required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1043A258-0042-01-1Z
Revision 21 or later
h. If the installed First Officer's seat has an Ipeco part number given in the table below and the
manual override cable maintenance has been completed on the seat in accordance with the
Ipeco CMM given in the table below, no further action is required for this seat.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-10-78,S232T303-4663A090-0078-03-1
Revision 20 or laterS232T303-4683A090-0078-04-1
S232T303-4703A090-0078-05-1
CMM 25-11-26,S232T311-43A258-0008-01-1Z
Revision 16 or later
i. If the installed First Officer's seat has an Ipeco part number given in the table below, which
also has a serial number identified by the effectivity of Ipeco SB 258-25-08, Issue 6, and this
seat has not done manual override cable maintenance, or the manual override cable
maintenance has been completed on the seat in accordance with an Ipeco CMM not given in
the table below, or the manual override cable maintenance history of this seat is not known,
do a Detailed Inspection of the fore/aft manual control lever and the vertical manual control
lever of the First Officer's seat for looseness in accordance with Ipeco SB 258-25-08, Issue
6.
Ipeco Component
Maintenance Manual
Boeing Part NumberIpeco Part Number
CMM 25-11-38,S232T311-1043A258-0042-01-1Z
Revision 21 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 6, do the steps that follow:
(a) Remove the First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
36 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 37

NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with Ipeco
SB 258-25-08, Issue 6, with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as seat
part number 3A258-0042-01-2, or is a First Officer's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a First Officer's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 258-25-08, Issue 6, no more work is necessary
on the First Officer's seat.
j. If the installed First Officer's seat has an Ipeco part number given in the table below, and this
seat has not done manual override cable maintenance, or the manual override cable
maintenance has been completed on the seat in accordance with an Ipeco CMM not given in
the table below, or the manual override cable maintenance history of this seat is not known,
do a Detailed Inspection of the fore/aft manual control lever and the vertical manual control
lever of the First Officer's seat for looseness in accordance with the applicable Ipeco Service
Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-11-26,Ipeco SB 258-25-08,
Issue 6
S232T311-43A258-0008-01-1Z
Revision 16 or later
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 258-25-08, Issue 6, do the steps that follow:
(a) Remove the First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with Ipeco
SB 258-25-08, Issue 6, with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as seat
part number 3A258-0042-01-2, or is a First Officer's seat that has done the
inspections and all applicable corrective actions in accordance with the
applicable Ipeco service bulletin. Or, it is a First Officer's seat that has done
manual override cable maintenance in accordance with the applicable Ipeco
CMM.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
37 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 38

(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in the applicable Ipeco Service Bulletin, no more work is
necessary on the First Officer's seat.
k. If the installed First Officer's seat has an Ipeco part number given in the table below, and this
seat has not done manual override cable maintenance, or the manual override cable
maintenance has been completed on the seat in accordance with an Ipeco CMM not given in
the table below, or the manual override cable maintenance history of this seat is not known,
do a Detailed Inspection of the fore/aft manual control lever and the vertical manual control
lever of the First Officer's seat for looseness in accordance with the applicable Ipeco Service
Bulletin given in the table below.
Ipeco Component
Maintenance Manual
Applicable Ipeco
Service Bulletin
Boeing Part
Number
Ipeco Part
Number
CMM 25-10-78,Ipeco SB 210-25-04,
Issue 1 or Issue 2 or Is-
sue 3
S232T303-4663A090-0078-03-1
Revision 20 or laterS232T303-4683A090-0078-04-1
S232T303-4703A090-0078-05-1
(1) If the movement at the end of the control cable for the fore/aft or vertical manual control
lever is not within the limits given in Ipeco SB 210-25-04, Issue 1 or Issue 2 or Issue 3,
do the steps that follow:
(a) Remove the First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: Operators can choose not to remove the First Officer's seat if there is
sufficient access to adjust the First Officer's seat in accordance with Ipeco
SB 210-25-04, Issue 1 or Issue 2 or Issue 3, with the seat installed.
(b) Install a serviceable First Officer's seat. Refer to 767 AMM 25-11-01 as an accepted
procedure.
NOTE: A serviceable First Officer's seat in this service bulletin is defined as one
that has done the inspections and all applicable corrective actions in
accordance with the applicable Ipeco service bulletin. Or, it is a First Officer's
seat that has done manual override cable maintenance in accordance with
the applicable Ipeco CMM.
(2) If the movement at the end of the control cable for the fore/aft and vertical manual control
levers is within the limits given in Ipeco SB 210-25-04, Issue 1 or Issue 2 or Issue 3, no
more work is necessary on the First Officer's seat.
3. For each Captain's and First Officer's seat that had its fore/aft manual control lever adjusted, do
the operational test that follows. If the Captain's or First Officer's seat fails the test, do corrective
actions and repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the fore/aft manual control
lever.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
38 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 39

c. Move the seat to the aft most position and release the control lever.
d. Make sure that the seat locks in the aft most position.
e. Operate the fore/aft manual control lever.
f. Move the seat to the forward most position and release the control lever.
g. Make sure that the seat locks in the forward most position.
4. For each Captain's and First Officer's seat that had its vertical manual control lever adjusted, do
the operational test that follows. If the Captain's or First Officer's seat fails the test, do corrective
actions and repeat the test until the test of the Captain's and First Officer's seat is passed.
a. Make sure there is no power supply to the seat.
b. While sitting in the seat and with the seat back fully upright, operate the vertical manual control
lever.
c. Make sure that the seat locks in the highest position.
d. Operate the vertical manual control lever.
e. Move the seat to the lowest position and release the control lever.
f. Make sure that the seat locks in the lowest position.
5. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2: January 27, 2023
39 of 41
BOEING SERVICE BULLETIN 767-25-0539

### Page 40 (OCR)

BOEING SERVICE BULLETIN 767-25-0539
CAPTAIN'S SEAT
TYPICA
EFT SIDE VIEW
(3)
FIRST OFFICER'S SEAT
(TYPICAL)
(LEFT SIDE VIEW)
2304530
FIGURE 1: FLIGHT COMPARTMENT SEATS - SEAT IDENTIFICATION
(SHEET 1 OF 2)
Original issue: January 09, 2014
Revision 2 January 27, 2023  767-25-0539
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  40 of 41

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)1-Captain's SeatInspect1
(a)1-First Officer's SeatInspect2
(a) Inspect the nameplate located on the rear face of the seat base to find the identification (part number
and, if necessary, serial number) of the installed seat.
FIGURE 1: FLIGHT COMPARTMENT SEATS - SEAT IDENTIFICATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 09, 2014
767-25-0539Revision 2 January 27, 2023
41 of 41
BOEING SERVICE BULLETIN 767-25-0539

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
