# Boeing Special Attention Service Bulletin 767-25-0548: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-8135; AD 2016-18-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 767-25-0548](https://openairdocs.org/service-documents/boeing/sb-767-25-0548.md)
- Title as filed: U.S. DOT/FAA - SB-767-25-0548-01
- Pages: 28
- PDF: https://openairdocs.org/files/sha256/df/95/df956e0899cc096b3eb19903be31cb20eed39a927ca9907f0782cb9a6e5585ad
- Page: https://openairdocs.org/service-documents/boeing/sb-767-25-0548/file/df956e0899cc

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-25-0548
Original Issue: November 05, 2014
Revision 1: April 23, 2015
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Door - Mounted Escape System - Slide Inflation Valve
- Rework
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
1 of 28
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
2 of 28
BOEING SERVICE BULLETIN 767-25-0548
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 19
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 21
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 1: FORWARD AND AFT ENTRY/SERVICE DOORS MODIFICATION . . . . . . . . . . . . 25
FIGURE 2: MID ENTRY/SERVICE DOORS MODIFICATION . . . . . . . . . . . . . . . . . . . . . . 27
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
3 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
4 of 28
BOEING SERVICE BULLETIN 767-25-0548
BLANK PAGE

### Page 5

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 767-25-0548Original Issue: November 05, 2014
Revision 1: April 23, 2015
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Door - Mounted Escape System - Slide Inflation Valve
- Rework
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Airplane VT033 was added to Group 1 of this service bulletin effectivity.
Effects of this Revision on airplanes on which Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to add airplane VT033 to this service bulletin effectivity.
These sections were changed:
1. In Paragraph 1.A.1., Airplanes, added airplane to Group 1.
2. In Paragraph 1.C., Reason, added paragraph.
3. In Paragraph 1.D., Description, added revision paragraph.
4. In Paragraph 1.J.1., Existing Data, added references.
5. In Paragraph 3.A., General Information, added note.
6. In Paragraph 3.B., Work Instructions, changed steps.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
November 05, 2014Original Issue:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
5 of 28

### Page 6

April 23, 2015Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
6 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 7

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 767-25-0548Original Issue: November 05, 2014
Revision 1: April 23, 2015
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Door - Mounted Escape System - Slide Inflation Valve
- Rework
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will ensure that the escape slide packs mounted on the Forward, Mid
and Aft entry and service doors do not experience an un-commanded deployment of the escape slide. If this
service bulletin is not accomplished, un-commanded deployment of the slide during normal airplane maintenance
or operation could result in injury to passengers and crew, damage to equipment, and the slide could not be
used in an emergency evacuation.
Two incidents of uncommanded escape slide inflation have been reported. In both cases, out of tolerance trigger
mechanism components (sector and sear) were found in the regulator valves which produced insufficient trigger
engagement and reduced pull force values.
Accomplishment of this service bulletin will modify the regulator valve by replacing the existing trigger mechanism
sector and sear.
Boeing Service Related Problem (SRP) 767-25-0328 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
7 of 28

### Page 8

ReferenceAffectedPlanning Data
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Remove escape slide packs located at the Forward and Aft Entry and Service Doors. Modify regulator valve in
accordance with UTC Aerospace Systems Service Bulletin 130104-25-432 or 4A3939-25-434. Reinstall escape
slide packs.
On airplanes equipped with Mid Entry and Service Doors, remove escape slide packs and modify regulator valve
in accordance with UTC Aerospace Systems Service Bulletin 130104-25-432 or 4A3939-25-434. Reinstall
escape slide packs.
EFFECTIVITY
767-200, 767-300 and 767-400ER Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 42 months after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
8 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 9 (OCR)

BOEING SERVICE BULLETIN 767-25-0548
AFT SERVICE
DOOR
MID
SERVICE
DOOR
FORWARD  AFT ENTRY
SERVICE  DOOR
DOOR.
MID ENTRY
DOOR
FORWARD
ENTRY
DOOR
REGULATOR VALVE
- REPLACE TRIGGER
MECHANISM SECTOR
AND SEAR
INFLATION CYLINDER
ASSEMBLY
TYPICAL
2335199
Original Issue: November 05, 2014
Revision 1: April 23, 2015  Export Controlled ECCN: 9E991 - BOEING  767-25-0548
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  9 of 28

### Page 10

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
10 of 28
BOEING SERVICE BULLETIN 767-25-0548
BLANK PAGE

### Page 11

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-25-0548
Original Issue: November 05, 2014
Revision 1: April 23, 2015
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Door - Mounted Escape System - Slide Inflation Valve
- Rework
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624T001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 767-200, -300, -400ER Airplanes, line numbers 1 - 1064 &
1068 in 1 Group. The Variable Numbers and Group Information for the applicable airplanes is
given below.
DESCRIPTIONCONFIGURATIONGROUP
All airplanes that have escape slide regulator valves.-1
Airplane Models:
767-200, 767-300, 767-400ER
GroupVariable Number
1VA001 - VA020
1VA301 - VA315
1VA501 - VA510
1VA512 - VA530
1VA701 - VA719
1VA801 - VA810
1VB001 - VB002
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
11 of 28

### Page 12

GroupVariable Number
1VB051 - VB055
1VB101 - VB125
1VB201 - VB202
1VB251 - VB253
1VB281 - VB284
1VB301 - VB302
1VB321 - VB332
1VB371 - VB373
1VB401
1VB441 - VB444
1VE001 - VE003
1VE021 - VE023
1VE041 - VE043
1VE061 - VE069
1VE083 - VE086
1VE101 - VE104
1VE116 - VE118
1VE121 - VE126
1VE141 - VE152
1VE171 - VE172
1VF001 - VF002
1VF041 - VF042
1VF051
1VF061 - VF062
1VF071 - VF072
1VF091 - VF093
1VF101 - VF102
1VF161 - VF162
1VF171 - VF172
1VF180 - VF184
1VF251
1VK001 - VK016
1VK021 - VK022
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
12 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 13

GroupVariable Number
1VK031 - VK056
1VK081 - VK113
1VK131 - VK133
1VK141 - VK148
1VK161 - VK164
1VK171
1VK181
1VK186
1VL001 - VL006
1VL011
1VL701 - VL703
1VL751 - VL755
1VL806 - VL807
1VL871 - VL873
1VL891 - VL900
1VL911 - VL914
1VL931 - VL932
1VL941
1VN001 - VN041
1VN051 - VN064
1VN081 - VN099
1VN111 - VN127
1VN130 - VN137
1VN151 - VN158
1VN163 - VN168
1VN171 - VN174
1VN198
1VN211 - VN212
1VN221 - VN225
1VN231 - VN234
1VN241 - VN243
1VN251 - VN276
1VN291 - VN293
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
13 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 14

GroupVariable Number
1VN301 - VN314
1VN371 - VN372
1VN376
1VN381 - VN388
1VN421 - VN427
1VN436
1VN471 - VN472
1VN491 - VN513
1VN531 - VN532
1VN536 - VN537
1VN541 - VN542
1VN546 - VN547
1VN551
1VN556 - VN557
1VN561 - VN562
1VN631 - VN638
1VN651 - VN658
1VN671 - VN672
1VN676
1VN681 - VN691
1VN731 - VN732
1VN751 - VN753
1VN811 - VN813
1VN922
1VN931 - VN936
1VN951 - VN953
1VN966 - VN972
1VQ001 - VQ021
1VQ071 - VQ086
1VQ111
1VR051 - VR060
1VR081
1VR084
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
14 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 15

GroupVariable Number
1VR086 - VR089
1VR106 - VR109
1VR401
1VR421 - VR423
1VR426
1VR441
1VR461
1VR471 - VR472
1VS051 - VS056
1VS061
1VS066 - VS070
1VS073 - VS078
1VS091 - VS104
1VS111 - VS113
1VS131 - VS133
1VS136 - VS137
1VS176 - VS177
1VS186 - VS187
1VS196 - VS203
1VS206 - VS208
1VS211
1VS216 - VS217
1VS231
1VS246 - VS248
1VS261 - VS263
1VS266 - VS274
1VS291 - VS293
1VS301 - VS303
1VS306 - VS311
1VS316
1VS321 - VS324
1VS331 - VS333
1VS336 - VS337
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
15 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 16

GroupVariable Number
1VS366 - VS367
1VS381 - VS382
1VS391 - VS392
1VS401
1VS426 - VS428
1VS466 - VS472
1VS486
1VS496 - VS497
1VS506 - VS507
1VS526
1VS546 - VS549
1VS701 - VS736
1VS751 - VS759
1VS821 - VS825
1VS841 - VS844
1VS861
1VS881 - VS883
1VS891
1VS896
1VS901 - VS912
1VS916
1VS921 - VS928
1VS931 - VS933
1VS941
1VS951 - VS954
1VS961 - VS969
1VS971 - VS977
1VS981 - VS984
1VT001 - VT013
1VT021
1VT031 - VT033
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
16 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 17

2. Spares Affected
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
B. Concurrent Requirements
The service bulletins listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
This service bulletin replaces the trigger
mechanism sector and sear on the slides
regulator valve.
130104-25-432 dated August 11, 2014UTC Aerospace
Systems
This service bulletin replaces the trigger
mechanism sector and sear on the slides
regulator valve
4A3939-25-434 dated August 11, 2014UTC Aerospace
Systems
C. Reason
Accomplishment of this service bulletin will ensure that the escape slide packs mounted on the Forward,
Mid and Aft entry and service doors do not experience an un-commanded deployment of the escape
slide. If this service bulletin is not accomplished, un-commanded deployment of the slide during normal
airplane maintenance or operation could result in injury to passengers and crew, damage to equipment,
and the slide could not be used in an emergency evacuation.
Two incidents of uncommanded escape slide inflation have been reported. In both cases, out of tolerance
trigger mechanism components (sector and sear) were found in the regulator valves which produced
insufficient trigger engagement and reduced pull force values.
Accomplishment of this service bulletin will modify the regulator valve by replacing the existing trigger
mechanism sector and sear.
Boeing Service Related Problem (SRP) 767-25-0328 is related to this service bulletin.
Revision 1 is sent to add airplane VT033 to this service bulletin effectivity.
D. Description
Remove escape slide packs located at the Forward and Aft Entry and Service Doors. Modify regulator
valve in accordance with UTC Aerospace Systems Service Bulletin 130104-25-432 or 4A3939-25-434.
Reinstall escape slide packs.
On airplanes equipped with Mid Entry and Service Doors, remove escape slide packs and modify
regulator valve in accordance with UTC Aerospace Systems Service Bulletin 130104-25-432 or
4A3939-25-434. Reinstall escape slide packs.
Effects of this Revision on airplanes on which Original Issue was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
17 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 18

Group 1:
Affected Maintenance Zones
ZoneModel
831, 833, 841, 843767-200
Group 1:
Affected Maintenance Zones
ZoneModel
831, 833, 835, 841, 843, 845767-300, 767-400ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 42 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The tables below show an estimate of the task hours necessary to do this modification for each Figure.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
18 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 19

FIGURE 1
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Open Access
1.503.002Close Access
(a) This estimate does not include the task hour data given in the service bulletins
in Paragraph 1.B., Concurrent Requirements.
FIGURE 2
Elapsed HoursTask HoursNumber of PersonsTask
0.751.502Open Access
0.751.502Close Access
(a) This estimate does not include the task hour data given in the service bulletins
in Paragraph 1.B., Concurrent Requirements.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo MRR 625014-004S
b. Boeing Service Related Problem (SRP) 767-25-0328
c. Service Bulletin Index D624T001
d. 767 Aircraft Maintenance Manual (AMM) 25-66-01
e. UTC Aerospace Systems Service Bulletin 130104-25-432, 4A3939-25-434
NOTE: The supplier was told to send copies of the service bulletins to each operator.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
19 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 20

K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-65, 25-66767 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
20 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
2. Parts and Materials Supplied by the Operator
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
3. Parts Modified and Reidentified
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
4. Parts Removed and Not Replaced
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
D. Parts Necessary to Change Spares
Refer to UTC Aerospace Systems Service Bulletins 130104-25-432, 4A3939-25-434.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
21 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 22

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
22 of 28
BOEING SERVICE BULLETIN 767-25-0548
BLANK PAGE

### Page 23

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
7. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
8. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
9. Some steps in the Work Instructions are identified as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
identified as RC and steps indented under an RC step must be done to comply with
the AD. Alternative procedures for steps not identified with RC can be used if the
RC steps and indented steps can still be done as specified, and the airplane can be
put back in a serviceable condition. An Alternative Method of Compliance (AMOC)
is not necessary for deviations to steps that are not identified as RC.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
23 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 24

B. WORK INSTRUCTIONS
1. RC - Modify Forward Entry Door, Forward Service Door, Aft Entry Door and Aft Service door in
accordance with Figure 1.
2. RC - On airplanes equipped with Mid Entry and Service Doors, modify Mid Entry Door and Mid
Service Door in accordance with Figure 2.
3. Put the airplane back in a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1: April 23, 2015
24 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 25 (OCR)

BOEING SERVICE BULLETIN 767-25-0548
AFT SERVICE
DOOR
FORWARD  AFT ENTRY
SERVICE  DOOR
DOOR
| FORWARD
ENTRY
DOOR
INFLATION CYLINDER
ASSEMBLY
TYPICAL
2335204
FIGURE 1: FORWARD AND AFT ENTRY/SERVICE DOORS MODIFICATION
(SHEET 1 OF 2)
Original Issue: November 05, 2014
Revision 1 April 23, 2015  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  767-25-0548
Work - See page 1 for details.  25 of 28

### Page 26

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFI-
CATION
NAMETASKSTEP
Refer to 767 AMM 25-66-01.4-Escape Slide PackRemove1
In accordance with UTC Aerospace
Systems Service Bulletins 130104-
25-432 or 4A3939-25-434.
4-Regulator ValveModify2
Refer to 767 AMM 25-66-01.4-Escape Slide PackReinstall3
FIGURE 1: FORWARD AND AFT ENTRY/SERVICE DOORS MODIFICATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1 April 23, 2015
26 of 28
BOEING SERVICE BULLETIN 767-25-0548

### Page 27 (OCR)

BOEING SERVICE BULLETIN 767-25-0548
MID
SERVICE
DOOR
J MID ENTRY
DOOR
INFLATION CYLINDER
ASSEMBLY
TYPICAL
2335215
FIGURE 2: MID ENTRY/SERVICE DOORS MODIFICATION
(SHEET 1 OF 2)
Original Issue: November 05, 2014
Revision 1 April 23, 2015  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  767-25-0548
Work - See page 1 for details.  27 of 28

### Page 28

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFI-
CATION
NAMETASKSTEP
Refer to 767 AMM 25-66-01.2-Escape Slide PackRemove1
In accordance with UTC Aerospace
Systems Service Bulletins 130104-
25-432 or 4A3939-25-434.
2-Regulator ValveModify2
Refer to 767 AMM 25-66-01.2-Escape Slide PackReinstall3
FIGURE 2: MID ENTRY/SERVICE DOORS MODIFICATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 05, 2014
767-25-0548Revision 1 April 23, 2015
28 of 28
BOEING SERVICE BULLETIN 767-25-0548

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
