# Boeing Service Bulletin 767-27-0201: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0095; AD 2013-25-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 767-27-0201](https://openairdocs.org/service-documents/boeing/sb-767-27-0201.md)
- Title as filed: U.S. DOT/FAA - SB-767-27-0201-00
- Pages: 18
- PDF: https://openairdocs.org/files/sha256/9c/2b/9c2b7e6d05be9621163eb07b7a0cbe8c9276abd4f57827804ed2df878a688413
- Page: https://openairdocs.org/service-documents/boeing/sb-767-27-0201/file/9c2b7e6d05be

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 18
 
 
 
Commercial
Airplane
Group 767
Service Bulletin
Number: 767-27-0201
Date: June 27, 2007
ATA System: 2731
SUBJECT: FLIGHT CONTROLS - Elevator - Repetitive Pogo Check
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2007 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, DC-8, DC-9, 
DC-10, MD-10, MD-11, MD-80, MD-88, MD-90, and the red-white-and-blue Boeing livery are all trademarks 
owned by The Boeing Company;  and no trademark license is granted in connection with this document unless 
provided in writing by Boeing.

### Page 2

BLANK PAGE
June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
BLANK PAGE

### Page 3

Table of Contents
June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
Table of Contents
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  10
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  10
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  10
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  11
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  12
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  12
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  13
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  13
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  15
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   15
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17

### Page 4

Table of Contents
June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
BLANK PAGE

### Page 5

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 18
 
 
 
Commercial
Airplane
Group 767
Service Bulletin
Number: 767-27-0201 Summary
Date: June 27, 2007
ATA System: 2731
SUBJECT: FLIGHT CONTROLS - Elevator - Repetitive Pogo Check
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
This service bulletin gives instructions to do repetitive pogo checks of the elevator Power Control Actuator (PCA) 
input rod assemblies. As an alternative to Boeing Alert Service Bulletin 767-27A0169, the incorporation of 
Boeing Service Bulletin 767-27-0187 to replace or rework elevator PCA bellcranks combined with the repetitive 
check of the elevator PCA input rod assemblies recommended in this service bulletin and the repetitive check 
ofthe elevator PCA rigging recommended in Boeing Service Bulletin 767-27-0203 will prevent continued 
operation with yielded or failed shear rivets in a bellcrank assembly for the elevator PCA and will also allow for 
longer inspection intervals. Operators are currently required by the Federal Aviation Administration (FAA) 
Airworthiness Directive (AD) 2001-04-09 to do the 400 flight-hour repetitive check recommended in Boeing Alert 
Service Bulletin 767-27A0169. 
One operator reported the left elevator drooping during a preflight check. Examination of the elevator control 
system found sheared rivets in the left-inboard and center PCA bellcrank assemblies. The elevator single 
hydraulic system check required by a Certification Maintenance Requirement (CMR) may not detect yielded or 
failed shear rivets in the bellcrank assemblies for the elevator PCA. As a result, the FAA issued AD 2000-17-05 
to mandate the accomplishment of the actions specified in Boeing Alert Service Bulletin 767-27A0166, dated 
August 17, 2000.
Since the issuance of AD 2000-17-05, the FAA has received reports that several 767-200, 767-300, and 767-
300F airplanes failed the one-time functional check of the shear rivets required by the AD. As a result, the FAA 
issued AD 2001-04-09 to mandate the accomplishment of the actions specified in Boeing Alert Service Bulletin 
767-27A0169, dated November 21, 2000.
A detailed design review found that the override device incorporated into the input rod assembly of the PCA 
provides protection against malfunctions and non-normal PCA operation. This design review also found that the 
shear rivets are not needed. The completion of Boeing Service Bulletin 767-27-0187 to replace or rework 
elevator PCA bellcranks combined with the repetitive check of the elevator PCA input rod assemblies 
recommended in this service bulletin and the repetitive check of the elevator PCA rigging recommended in 
Boeing Service Bulletin 767-27-0203 is an alternative to the 400 fllight-hour repetitive check recommended in 
Boeing Alert Service Bulletin 767-27A0169.
Boeing Service Related Problem (SRP) 767-SRP-27-0128 is related to this service bulletin.

### Page 6

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
ACTION (PRR B12901-35S)
Do a pogo check of the input rod assembly on each of the six elevator PCAs. 
EFFECTIVITY
767-400ER airplanes. See Service Bulletin Paragraph 1.A.1 for effectivity.
COMPLIANCE
The FAA will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness 
Directive will make the compliance tasks and times given in this service bulletin mandatory.
See Service Bulletin Paragraph 1.E. for compliance information.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this service 
bulletin.
MANPOWER
MATERIAL INFORMATION
None.
Total Task Hours Elapsed Hours
32.0 16.0

### Page 7

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
ELEVATOR PCA'S
(LEFT SIDE SHOWN)
ASSEMBLY (TYPICAL)
DO POGO CHECK
(6 LOCATIONS)
INPUT ROD
FWD
479835

### Page 8

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
BLANK PAGE

### Page 9

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 18
 
 
 
Commercial
Airplane
Group 767
Service Bulletin
Number: 767-27-0201
Date: June 27, 2007
ATA System: 2731
SUBJECT: FLIGHT CONTROLS - Elevator - Repetitive Pogo Check
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624T001 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. Refer to PRR B12901-35S for data about 
this change.
NOTE: This service bulletin is for the airplanes identified below.  The effectivity list shown below
is complete for airplanes through line number 878.  Airplanes after line number 878 are
also affected by this service bulletin.  These airplanes will be added to the service
bulletin’s MyBoeingFleet.com (MBF) "get effectivity" result when they are added to the
MBF Fleet Profile Page.
Airplane models:
767-400ER
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
CONTINENTAL AIRLINES  (CAL)
1 VQ071–VQ086
DELTA AIR LINES  (DAL)
1 VQ001–VQ021
GROUP CONFIGURATION DESCRIPTION
1 - 767-400ER airplanes line numbers 1-901 
require incorporation of SB 767-27-0187.
2 - 767-400ER airplanes line numbers 902 and on 
do not require SB 767-27-0187. Intent of SB 
767-27-0187 was done in production for these 
airplanes.

### Page 10

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
IDENTIFICATION BY VARIABLE NUMBER
2. Spares Affected
None.
B. Concurrent Requirements
The service bulletin listed below must be done before or at the same time as this service bulletin:
Group  2: None. The changes given in Boeing Service Bulletin 767-27-0187 were made on these 
airplanes before delivery.
C. Reason
This service bulletin gives instructions to do repetitive pogo checks of the elevator Power Control 
Actuator (PCA) input rod assemblies. As an alternative to Boeing Alert Service Bulletin 767-27A0169, 
the incorporation of Boeing Service Bulletin 767-27-0187 to replace or rework elevator PCA bellcranks 
combined with the repetitive check of the elevator PCA input rod assemblies recommended in this 
service bulletin and the repetitive check ofthe elevator PCA rigging recommended in Boeing Service 
Bulletin 767-27-0203 will prevent continued operation with yielded or failed shear rivets in a bellcrank 
assembly for the elevator PCA and will also allow for longer inspection intervals. Operators are 
currently required by the Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2001-04-
09 to do the 400 flight-hour repetitive check recommended in Boeing Alert Service Bulletin 767-
27A0169. 
One operator reported the left elevator drooping during a preflight check. Examination of the elevator 
control system found sheared rivets in the left-inboard and center PCA bellcrank assemblies. The 
elevator single hydraulic system check required by a Certification Maintenance Requirement (CMR) 
may not detect yielded or failed shear rivets in the bellcrank assemblies for the elevator PCA. As a 
result, the FAA issued AD 2000-17-05 to mandate the accomplishment of the actions specified in 
Boeing Alert Service Bulletin 767-27A0166, dated August 17, 2000.
Since the issuance of AD 2000-17-05, the FAA has received reports that several 767-200, 767-300, 
and 767-300F airplanes failed the one-time functional check of the shear rivets required by the AD. 
As a result, the FAA issued AD 2001-04-09 to mandate the accomplishment of the actions specified 
in Boeing Alert Service Bulletin 767-27A0169, dated November 21, 2000.
Variable  Group
VQ001–VQ021 1
VQ071–VQ086 1
Group  1: 
Company Service Bulletin Description
Boeing 767-27-0187 Original Issue Elevator Power Control Actuator Bellcrank 
Replacement

### Page 11

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
A detailed design review found that the override device incorporated into the input rod assembly of the 
PCA provides protection against malfunctions and non-normal PCA operation. This design review 
also found that the shear rivets are not needed. The completion of Boeing Service Bulletin 767-27-
0187 to replace or rework elevator PCA bellcranks combined with the repetitive check of the elevator 
PCA input rod assemblies recommended in this service bulletin and the repetitive check of the 
elevator PCA rigging recommended in Boeing Service Bulletin 767-27-0203 is an alternative to the 
400 fllight-hour repetitive check recommended in Boeing Alert Service Bulletin 767-27A0169.
Boeing Service Related Problem (SRP) 767-SRP-27-0128 is related to this service bulletin.
D. Description
Do a pogo check of the input rod assembly on each of the six elevator PCAs. 
E. Compliance
The FAA will possibly release an Airworthiness Directive related to this service bulletin. The 
Airworthiness Directive will make the compliance tasks and times given in this service bulletin 
mandatory.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity.  This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
Table 1:  Check Operation of the Input Rod Assemblies of the Left and Right Elevator PCA
Condition Action
Compliance Time
(Whichever Occurs Last)
Repeat Interval 
(Not to Exceed)
All Airplanes Do Elevator 
Pogo Check 
as given in 
Accomplishme
nt Instructions 
3.B.
Before 12,000 
total flight hours 
since the date 
of issuance of 
the original 
standard 
airworthiness 
certificate or the 
date of 
issuance of the 
original export 
certificate of 
airworthiness
Before 12,000 
total flight hours 
since 
completion of 
the last pogo 
check
Within 6,000 
flight hours 
after the date 
on this service 
bulletin
12,000 flight hours

### Page 12

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
This service bulletin has been approved by the FAA. In addition, the Manager of the FAA Seattle 
Aircraft Certification Office approves the action (i.e. inspection or modification) defined in this service 
bulletin combined with the actions defined in Boeing Service Bulletins 767-27-0187 and 767-27-0203 
as an alternative method of compliance to the requirements of paragraph (a) of AD 2001-04-09. All 
provisions of AD 2001-04-09 that are not specifically referenced in the above statement remain fully 
applicable and must be complied with.
G. Manpower
The table below shows an estimate of the task-hours necessary to do the pogo check for each 
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with 
operator task-hour data if necessary. The estimate does not include lost time. These are some 
examples of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to find the tools.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
Group  1-2: 
Work Package 
Number Task
Number of 
Persons Task-Hours Elapsed Hours
1 Remove input rod assemblies 2 1.5 0.75
Check input rod assemblies 2 12.0 6.0
Install input rod assemblies 2 1.5 0.75
Adjust input rod assemblies 2 1.0 0.5
TOTAL FOR WORK PACKAGE 1 (a) 16.0 8.0
2 Remove input rod assemblies 2 1.5 0.75
Check input rod assemblies 2 12.0 6.0
Install input rod assemblies 2 1.5 0.75
Adjust input rod assemblies 2 1.0 0.5
TOTAL FOR WORK PACKAGE 2 (a) 16.0 8.0
TOTAL FOR EACH AIRPLANE 32.0 16.0
(a) This is total time to do tasks for all 3 elevator PCAs

### Page 13

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
J. References
1. Existing Data:
a. Engineering Change Memo PRR B12901-35S
b. Service Related Problem (SRP) 767-SRP-27-0128
c. 767 Aircraft Maintenance Manual (AMM)    27-31-00, 27-31-07
d. 767 Structural Repair Manual (SRM) Chapter 51
e. Component Maintenance Manual (CMM) 27-31-64
f. Boeing Service Bulletin 767-27A0166
g. Boeing Service Bulletin 767-27A0169
h. Boeing Service Bulletin 767-27-0187
i. Boeing Service Bulletin 767-27-0203
j. FAA Airworthiness Directive 2000-17-05
k. FAA Airworthiness Directive 2001-04-09
l. Boeing Drawing 012W6100 
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
None.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.

### Page 14

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
BLANK PAGE

### Page 15

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this 
service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
None.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, 
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be 
necessary. Examine operator tool supply to make sure all necessary tools are available.

### Page 16

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
BLANK PAGE

### Page 17

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
WARNING: DO NOT SUPPLY HYDRAULIC POWER DURING THE REMOVAL / INSTALLATION
OF THE PCA CONTROL ROD. INJURY TO PERSONS OR DAMAGE TO EQUIPMENT
CAN OCCUR.
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS.  UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES.  DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for 
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task-Hours and Elapsed-Hours 
for each package are given in Paragraph 1.G., Manpower. You can do each work 
package independently.The work instructions for the left and right elevators are the 
same and both work packages need to be completed before the plane is returned to 
service.
4. For approved fastener and process material substitutions, refer to 767 Structural Repair 
Manual, Chapter 51, Alternate fasteners are given in 767 Structural Repair Manual 
Chapter 51 and Boeing Drawing 012W6100.
5. These work instructions refer to procedures included on other Boeing documents. When 
the words "refer to" are used and the operator has an accepted alternative procedure, 
the accepted alternative procedure can be used. When the words "as given in" are 
included in the instruction, the procedure in the Boeing document must be used.
B. WORK INSTRUCTIONS
WORK PACKAGE 1 - LEFT ELEVATOR POGO CHECK
1. Repeat the following steps for each of the three elevator Power Control Actuators (PCA):
a. Remove the elevator PCA input rod assembly. Refer to 767 AMM 27-31-07 as an accepted 
procedure.
b. Do the following functional test on the elevator PCA input rod assembly. 
(1) Make sure that the load is 42-62 lbs for initial breakout in the extending and collapsing 
directions.
(2) Make sure that the load is 67-97 lbs for travel 0.005 to 0.020 inches from the fully 
compressed or extended position.

### Page 18

June 27, 2007
767-27-0201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 18
BOEING SERVICE BULLETIN 767-27-0201
 
 
(3) Make sure that the deflection is 1.15-1.35 inches in both the fully compressed or 
extended position at full travel of the elevator PCA input rod assembly.
(4) Make sure that all operations are smooth and free from binding.
c. Replace or overhaul the elevator PCA input rod assembly if it fails to meet any requirement 
above. Refer to CMM 27-31-64 as an accepted procedure. 
d. Install the elevator PCA input rod assembly. Refer to 767 AMM 27-31-07 as an accepted 
procedure.
2. Adjust the PCA input rod assembly. Refer to 767 AMM 27-31-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
WORK PACKAGE 2 - RIGHT ELEVATOR POGO CHECK
1. Repeat the following steps for each of the three elevator PCAs:
a. Remove the elevator PCA input rod assembly. Refer to 767 AMM 27-31-07 as an accepted 
procedure.
b. Do the following functional test on the elevator PCA input rod assembly. Refer to CMM 
27-31-64 as an accepted procedure. 
(1) Make sure that the load is 42-62 lbs for initial breakout in the extending and collapsing 
directions.
(2) Make sure that the load is 67-97 lbs for travel 0.005 to 0.020 inches from the fully 
compressed or extended position.
(3) Make sure that the deflection is 1.15-1.35 inches in both the fully compressed or 
extended position at full travel of the elevator PCA input rod assembly.
(4) Make sure that all operations are smooth and free from binding.
c. Replace or overhaul the elevator PCA input rod assembly if it fails to meet any requirement 
above. Refer to CMM 27-31-64 as an accepted procedure. 
d. Install the elevator PCA input rod assembly. Refer to 767 AMM 27-31-07 as an accepted 
procedure.
2. Adjust the PCA input rod assembly. Refer to 767 AMM 27-31-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
