# Boeing Special Attention Service Bulletin 767-29-0113: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0978; AD 2014-17-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 767-29-0113](https://openairdocs.org/service-documents/boeing/sb-767-29-0113.md)
- Title as filed: U.S. DOT/FAA - SB-767-29-0113-00-
- Pages: 26
- PDF: https://openairdocs.org/files/sha256/3a/ee/3aee1fd8c66220bb33df3f192e805ed5c6e83a8976b16ea3694544db6a830136
- Page: https://openairdocs.org/service-documents/boeing/sb-767-29-0113/file/3aee1fd8c662

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-29-0113
Original Issue: May 29, 2013
ATA System: 2911
SUBJECT: MAIN HYDRAULIC SYSTEMS - Center Hydraulic System Air Driven Pump (ADP) -
Turbine Gearbox Assembly (TGA) Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2013 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: May 29, 2013
767-29-0113
1 of 26
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
2 of 26
BOEING SERVICE BULLETIN 767-29-0113
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 0
B. Concurrent Requirements ...................................... 1 0
C. Reason ................................................ 1 0
D. Description .............................................. 1 1
E. Compliance .............................................. 1 1
F. Approval ............................................... 1 1
G. Manpower .............................................. 1 1
H. Weight and Balance Changes .................................... 1 2
I. Electrical Load Data ......................................... 1 3
J. References .............................................. 1 3
1. Existing Data: ......................................... 1 3
2. Data Supplied with this Service Bulletin: ........................... 1 3
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 3
K. Publications Affected ........................................ 1 3
L. Interchangeability and Intermixability of Parts ........................... 1 4
M. Software Accomplishment Summary ................................ 1 4
2. MATERIAL INFORMATION ........................................ 1 5
A. Material - Price and Availability ................................... 1 5
B. Industry Support Information .................................... 1 5
C. Parts Necessary for Each Airplane ................................. 1 5
1. Kits/Parts ............................................ 1 5
2. Parts and Materials Supplied by the Operator ........................ 1 5
3. Parts Modified and Reidentified ................................ 1 6
4. Parts Removed and Not Replaced .............................. 1 6
D. Parts Necessary to Change Spares ................................. 1 6
E. Special Tooling - Price and Availability ............................... 1 6
F. Special Tooling Necessary to do this Service Bulletin ....................... 1 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 7
A. GENERAL INFORMATION ..................................... 1 7
B. WORK INSTRUCTIONS ....................................... 1 8
FIGURE 1: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - DISCONNECT [Group 1, Configuration 1] .......... 1 9
FIGURE 2: TURBINE GEARBOX ASSEMBLY (TGA) - TGA INTERFACE - BOTTOM AND TOP AFT TIE
ROD ASSEMBLY - REMOVAL [Group 1, Configuration 1] .................. 2 2
FIGURE 3: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - INSTALLATION [Group 1, Configuration 1] .......... 2 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
3 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
4 of 26
BOEING SERVICE BULLETIN 767-29-0113
BLANK PAGE

### Page 5

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 767-29-0113Original Issue: May 29, 2013
ATA System: 2911
SUBJECT: MAIN HYDRAULIC SYSTEMS - Center Hydraulic System Air Driven Pump (ADP) -
Turbine Gearbox Assembly (TGA) Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will make sure that the existing Air Driven Pump (ADP) Turbine Gearbox
Assembly (TGA) of the Center Hydraulic System is replaced with an improved ADP TGA. The improved ADP
TGA includes significant changes of the containment capabilities over the existing design. The new design
minimizes the risk of external damage associated with fractures to the ADP TGA and the release of high energy
fragments during an ADP TGA turbine wheel burst. If the existing ADP TGA is not replaced, and an uncontained
turbine wheel burst occurs, high energy fragments could cause damage to the airplane and hazards to persons
or property on the ground.
Analysis by Boeing finds that the existing ADP TGA design cannot adequately contain fragments caused by a
ADP TGA turbine wheel burst.
Operators have reported uncontained failures of the ADP TGA turbine wheel when flight crews noticed a reduction
in center hydraulic system pressure, and upon landing, found damage to the ADP TGA, left aft wing-to-body
fairing, and airplane skin.
This service bulletin gives instructions to replace the existing ADP TGA with an improved ADP TGA that can
adequately contain a turbine burst event should one occur.
Boeing Service Related Problem (SRP) 767-SRP-29-0083 is related to this service bulletin.
Service History
ReportCycles/Years/Hours
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 41,004
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 8,522
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
5 of 26

### Page 6

Service History
ReportCycles/Years/Hours
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 2,021
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 29,189
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 31,827
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 33,968
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 35,743
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR B12901-104S)
Remove the existing ADP TGA.
Install a new ADP TGA.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
6 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 7

EFFECTIVITY
767-400ER Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 36 months after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the repair procedures given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
7 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 8 (OCR)

BOEING SERVICE BULLETIN 767-29-0113
AFT LEFT
WING/BODY
FAIRING
FWD
REMOVE THE
AIR DRIVEN PUMP  EXISTING ADP TGA.
(ADP) ASSEMBLY  INSTALL THE NEW
ADP TGA
TGA,
SHOWN WITHOUT
PROTECTIVE
BLANKET INSTALLED
TURBINE/GEARBOX
ASSEMBLY (TGA)
AIR DRIVEN PUMP
2098669
Original Issue: May 29, 2013
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  767-29-0113
Work - See page 1 for details.  8 of 26

### Page 9

Commercial 
Airplanes
767
Service Bulletin
SPECIAL ATTENTION
Number: 767-29-0113
Original Issue: May 29, 2013
ATA System: 2911
SUBJECT: MAIN HYDRAULIC SYSTEMS - Center Hydraulic System Air Driven Pump (ADP) -
Turbine Gearbox Assembly (TGA) Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR B12901-104S for data about this change.
Refer to Service Bulletin Index D624T001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
767-400ER Airplanes.-1
Airplanes with Protective Blanket installed on the Turbine Gearbox
Assembly.
1
Airplanes without Protective Blanket installed on Turbine Gearbox
Assembly.
2
Airplane Models:
767-400ER
GroupVariable Number
1VQ001 - VQ021
1VQ071 - VQ086
1VQ111
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
9 of 26

### Page 10

2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will make sure that the existing Air Driven Pump (ADP) Turbine
Gearbox Assembly (TGA) of the Center Hydraulic System is replaced with an improved ADP TGA. The
improved ADP TGA includes significant changes of the containment capabilities over the existing
design. The new design minimizes the risk of external damage associated with fractures to the ADP
TGA and the release of high energy fragments during an ADP TGA turbine wheel burst. If the existing
ADP TGA is not replaced, and an uncontained turbine wheel burst occurs, high energy fragments could
cause damage to the airplane and hazards to persons or property on the ground.
Analysis by Boeing finds that the existing ADP TGA design cannot adequately contain fragments caused
by a ADP TGA turbine wheel burst.
Operators have reported uncontained failures of the ADP TGA turbine wheel when flight crews noticed
a reduction in center hydraulic system pressure, and upon landing, found damage to the ADP TGA,
left aft wing-to-body fairing, and airplane skin.
This service bulletin gives instructions to replace the existing ADP TGA with an improved ADP TGA
that can adequately contain a turbine burst event should one occur.
Boeing Service Related Problem (SRP) 767-SRP-29-0083 is related to this service bulletin.
Service History
ReportCycles/Years/Hours
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 41,004
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 8,522
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 2,021
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 29,189
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 31,827
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
10 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 11

Service History
ReportCycles/Years/Hours
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 33,968
ADP TGA Turbine wheel burst resulted in fractures to the ADP
TGA and release of high energy fragments. Release of the high
energy fragments resulted in airplane damage.
TGA Service Hours 35,743
D. Description
Remove the existing ADP TGA.
Install a new ADP TGA.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
197767-400ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 36 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
11 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 12

 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1, Configuration 1:
Elapsed HoursTask HoursNumber of PersonsTask
1.6253.252Remove Existing
ADP TGA
--1FIGURE 1
0.250.251FIGURE 2
--1FIGURE 3
1.6253.252Install New ADP
TGA
3.506.75TOTAL FOR EACH AIRPLANE
Group 1, Configuration 2:
Elapsed HoursTask HoursNumber of PersonsTask
1.6253.252Remove Existing
ADP TGA
1.6253.252Install New ADP
TGA
3.256.50TOTAL FOR EACH AIRPLANE
The time to make the change to the Air Driven Pump (ADP) Turbine Gearbox Assembly (TGA) in
accordance with Fairchild Controls SB N012000000-29-03 R2 Service Bulletin is not included.
Group 1, Configuration 1:
The time to do the task in Figure 1 and Figure 3 is already given in the Removal and Installation of the
ADP TGA.
H. Weight and Balance Changes
Group 1, Configuration 1:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+5350.7 lb.-in.+4.6 lb.767-400ER
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
12 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 13

Group 1, Configuration 2:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+19309.0 lb.-in.+16.6 lb.767-400ER
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR B12901-104S
b. Boeing Service Related Problem (SRP) 767-SRP-29-0083
c. Service Bulletin Index D624T001
d. 767 Aircraft Maintenance Manual (AMM) 29-11-03
e. Fairchild Controls Service Bulletin Fairchild Controls SB N012000000-29-03 R2
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
AIR DRIVE UNIT INSTALLATION - SECTION 46271T4606
The table above lists a applicable drawing used to prepare this service bulletin. The drawing is
not necessary to make the specified changes, and is not supplied with this service bulletin. The
drawing may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
29-11767 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
13 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 14

L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
14 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 15

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes repair procedures given in
this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b) (c) (d)N012000000Turbine Gearbox Assembly (TGA)1N012000000-2
oror
N012000000-1N012000000-3
(a) You cannot use the existing part to replace the new or changed part.
(b) Fairchild Controls SB N012000000-29-03 R2 gives instructions to change the existing part to the
new/changed part.
(c) Boeing Specification Number S271T401-11 corresponds to Fairchild Controls Part Numbers N012000000-
2 or N012000000-3.
(d) Boeing Specification Number S271T401-1 corresponds to Fairchild Controls Part Numbers N012000000
or N012000000-1.
Group 1, Configuration 1:
NotesNameQTYPart Number /
Specification
Cotter Pin4BACP18BC02A06P
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
15 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 16

Group 1, Configuration 2:
NotesNameQTYPart Number /
Specification
Cotter Pin2BACP18BC02A06P
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
16 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 17

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
10. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
17 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 18

B. WORK INSTRUCTIONS
1. Remove the existing Air Driven Pump (ADP) Turbine Gearbox Assembly (TGA) part number
N012000000 or N012000000-1. Refer to 767 AMM 29-11-03 as an accepted procedure.
Group 1, Configuration 1:
NOTE: When the ADP TGA of the Center Hydraulic System is removed from the airplane, it can
be difficult to disconnect the bottom and top aft tie rod assemblies from the ADP TGA
because of interference with the protective blanket. Figures 1 - 3, as referred to below,
provide an alternative method to disconnect/connect these tie rod assemblies from/to the
bottom and top aft ADP TGA airplane skin interface.
Group 1, Configuration 1:
a. You can do the following steps as an alternative to the tie rod disconnection instructions given
in 767 AMM 29-11-03.
(1) Disconnect the bottom and top aft tie rod assemblies in accordance with FIGURE 1
(2) Remove and keep the bottom and top aft tie rod assemblies from the ADP TGA in
accordance with FIGURE 2.
(3) Install the kept bottom and top aft tie rod assemblies at the airplane skin interface in
accordance with FIGURE 3.
2. Install the new ADP TGA part number N012000000-2 or N012000000-3. Refer to 767 AMM
29-11-03 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
18 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 19 (OCR)

BOEING SERVICE BULLETIN 767-29-0113
This Figure applies only to: Group 1, Configuration 1.
LA
TURBINE/
GEARBOX
ASSEMBLY
(TGA)
AIR DRIVEN PUMP (ADP)
2208487
FIGURE 1: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - DISCONNECT
(SHEET 1 OF 3)
Original Issue: May 29, 2013
Export Controlled ECCN: 9E991 - BOEING  767-29-0113
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  19 of 26

### Page 20 (OCR)

BOEING SERVICE BULLETIN 767-29-0113
1 BOLT
WASHER
1 BUSHING
TIE ROD
ASSEMBLY
1 WASHER
1 NUT
1 COTTER
PIN
TIE ROD
LEMO  ASSEMBLY
TOP AFT TGA AIRPLANE
SKIN INTERFACE
1 BOLT
COTTER (1  J WASHER
PIN
) BUSHING
NUT C
WASHER
BOTTOM AFT TGA AIRPLANE
SKIN INTERFACE
2208490
FIGURE 1: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - DISCONNECT
(SHEET 2 OF 3)
Original Issue: May 29, 2013
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  767-29-0113
Work - See page 1 for details.  20 of 26

### Page 21

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
2-Cotter PinRemove1
2-NutRemove / Keep
4-WasherRemove / Keep
2-BoltRemove / Keep
2-BushingRemove / Keep
2-Tie Rod AssemblyDisconnect
FIGURE 1: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - DISCONNECT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
21 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 22 (OCR)

BOEING SERVICE BULLETIN 767-29-0113
This Figure applies only to: Group 1, Configuration 1.
TURBINE
GEARBOX
ASSEMBLY
COTTER PIN 1
WASHER 1  ONUT
CLEVIS
• BRACKET
TIE ROD
ASSEMBLY
BUSHING 1)
WASHER
BOLT
TYPICAL
2208519
FIGURE 2: TURBINE GEARBOX ASSEMBLY (TGA) - TGA INTERFACE - BOTTOM AND TOP AFT TIE ROD
ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: May 29, 2013
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  767-29-0113
Work - See page 1 for details.  22 of 26

### Page 23

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
2-Cotter PinRemove1
2-NutRemove / Keep
4-WasherRemove / Keep
2-BoltRemove / Keep
2-BushingRemove / Keep
Disconnect at Clevis
Bracket/TGA inter-
face.
2-Tie Rod AssemblyRemove / Keep
FIGURE 2: TURBINE GEARBOX ASSEMBLY (TGA) - TGA INTERFACE - BOTTOM AND TOP AFT TIE ROD
ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
23 of 26
BOEING SERVICE BULLETIN 767-29-0113

### Page 24 (OCR)

BOEING SERVICE BULLETIN 767-29-0113
This Figure applies only to: Group 1, Configuration 1.
AFT LEFT
WING/BODY
FAIRING
AIR DRIVEN PUMP (ADP)
2208079
FIGURE 3: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - INSTALLATION
(SHEET 1 OF 3)
Original Issue: May 29, 2013
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  767-29-0113
Work - See page 1 for details.  24 of 26

### Page 25 (OCR)

BOEING SERVICE BULLETIN 767-29-0113
1 BOLT
1 WASHER
1) BUSHING
TE ROD
ASSEMBLY
1 WASHER
1 NUT
1) COTTER
PIN
TIE ROD
ASSEMBLY
TOP AFT TGA AIRPLANE
SKIN INTERFACE
COTTER (1  1 WASHER
PIN
) BUSHING
NUT (
WASHER
BOTTOM AFT TGA AIRPLANE
SKIN INTERFACE
FIGURE 3: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - INSTALLATION
(SHEET 2 OF 3)
Original Issue: May 29, 2013
Export Controlled ECCN: 9E991 - BOEING  767-29-0113
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  25 of 26

### Page 26

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
2-Tie Rod AssemblyInstall (Kept)1
2-BushingInstall (Kept)
4-WasherInstall (Kept)
2-BoltInstall (Kept)
Tighten the nut to 65
+/- 2 Inch Pounds.
2-NutInstall (Kept)
2BACP18BC02A06PCotter PinInstall (New)
FIGURE 3: TURBINE GEARBOX ASSEMBLY (TGA) - AIRPLANE SKIN INTERFACE - BOTTOM AND TOP
AFT TIE ROD ASSEMBLY - INSTALLATION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 29, 2013
767-29-0113
26 of 26
BOEING SERVICE BULLETIN 767-29-0113

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
