# Boeing Special Attention Service Bulletin 767-30-0039: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0274, the docket of AD 2010-15-01. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 767-30-0039](https://openairdocs.org/service-documents/boeing/sb-767-30-0039.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin (767)
- Pages: 51
- PDF: https://openairdocs.org/files/sha256/1b/ca/1bcaca944a86d1f4980a2a66610fc4cec963a12adfc20114ec7cdbac0d58e2c5
- Page: https://openairdocs.org/service-documents/boeing/sb-767-30-0039/file/1bcaca944a86

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 51
 
 
 
Commercial
Airplane
Group 767
SPECIAL ATTENTION
Service Bulletin
Number: 767-30-0039
Date: December 05, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Icing - Windshield 
Inspection and Replacement
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2007 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10, 
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or 
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document 
or otherwise.

### Page 2

BLANK PAGE
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
BLANK PAGE

### Page 3

Table of Contents
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
Table of Contents
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  21
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  22
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  23
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  24
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  24
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  24
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  27
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  27
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  27
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  28
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  28
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   31
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  31
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  33
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  33
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  34
FIGURE  1: INSPECTION OF THE LEFT WINDSHIELD   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
FIGURE  2: INSPECTION OF THE RIGHT WINDSHIELD.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  40
FIGURE  3: CUT THE BULB SEAL FOR THE LEFT WINDSHIELD .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  42
FIGURE  4: CHANGES TO THE WIRING FOR THE WINDOW HEAT WIRING ON THE LEFT
WINDSHIELD .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  44
FIGURE  5: WIRE ROUTING FOR THE WINDOW HEAT ON THE LEFT WINDSHIELD .  .  .  .  .  .  .  .  46
FIGURE  6:  CUT THE BULB SEAL FOR THE RIGHT WINDSHIELD .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  47
FIGURE  7: CHANGES TO THE WIRING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD.  49
FIGURE  8: WIRE ROUTING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD  .  .  .  .  .  .  .  51

### Page 4

Table of Contents
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
BLANK PAGE

### Page 5

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 51
 
 
 
Commercial
Airplane
Group 767
SPECIAL ATTENTION
Service Bulletin
Number: 767-30-0039 Summary
Date: December 05, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Icing - Windshield 
Inspection and Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None
BACKGROUND
This service bulletin gives instructions to do an inspection of an electrical connection on the left and the right 
windshields.  Instructions are also given to replace the windshields and make changes to their related wire 
bundles.  A new windshield design is available that uses a different electrical connection.  When the changes 
given in this bulletin are done, the windshields will have better electrical connections.  The new connections are 
made with pins and sockets.  The pin and socket connections will prevent the risk of electrical arcs as a result 
of loose connections.
Boeing received nine reports from eight operators of electrical arcs at the terminal blocks of the flight 
compartment windows.  More than one of these reports included data to show that the results of the arcs were 
open flame incidents.  One operator found an indication of damage at a terminal and tightened a loose 
connection.  The terminal had internal damage that could not be seen.  Less than six months after the 
connection was tightened there was a report from the operator of an open flame incident on the same 
windshield.
The electrical connections on the windows are made with lugs that are attached with screws.  The windshield 
is the number 1 window in the flight compartment.  All of the windows in the flight compartment are electrically 
heated.  The windshield gets a much larger electrical load. 
An investigation found that the cause of the electrical arcs is loose terminal connections.  A loose connection 
increases the heat at the terminal which can cause damage to the internal solder joint.  Damaged solder joints 
are the primary cause for the electrical arcs.  The primary causes of loose connections are the incorrect torque 
of the screw or an incorrectly installed screw.
The inspection given in this service bulletin is to look for damage or a loose electrical connection on the 
windshield.  If there are indications of electrical arcs or damage to the electrical connection, the windshield is 
replaced.  If there is a loose electrical connection, the correct torque is applied to tighten it.  If a connection 
cannot be tightened to the correct torque, the windshield is replaced.  When a windshield with an electrical 
connection that uses pins and sockets is installed, the related wire bundle on the airplane is changed.

### Page 6

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 51
 
 
Boeing Service Related Problem (SRP) 767-SRP-56-0015 is related to this service bulletin.
ACTION (PRR B12901-56S)
In the flight compartment, do an inspection of the J5 terminal on the left and the right windshields.  Replace 
windshields that use screws and lugs for the electrical connections with a windshield that uses pins and sockets 
for the electrical connections.  Cut the bulb seal to give clearance for terminals on the new windshield.  Change 
the related wire bundle.
EFFECTIVITY
767-200/-300/-300F Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
See Service Bulletin Paragraph 1.E. for compliance information.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
MATERIAL INFORMATION
Boeing Supplied Kits/Parts
Refer to Paragraph 2.A., Material - Price and Availability.
Work Package Total Task Hours Elapsed Hours
Work Package 1 - Inspection of the Left Windshield 0.25 0.25
Work Package 2 - Inspection of the Right Windshield 0.25 0.25
Work Package 3 - Left Windshield Replacement and 
Wiring Change 
8.5 4.75
Work Package 4 - Right Windshield Replacement 
and Wiring Change 
8.5 4.75

### Page 7

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
WORK PACKAGE 2:
INSPECT THE RIGHT
WINDSHIELD
INSPECT THE LEFT WINDSHIELD
WORK PACKAGE 1:
WORK PACKAGE 3:
CUT THE BULB SEAL AND
REPLACE THE LEFT WINDSHIELD.
CHANGE THE RELATED WIRING.
WORK PACKAGE 4:
CUT THE BULB SEAL AND
REPLACE THE RIGHT WINDSHIELD.
CHANGE THE RELATED WIRING.
481730

### Page 8

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
BLANK PAGE

### Page 9

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 51
 
 
 
Commercial
Airplane
Group 767
SPECIAL ATTENTION
Service Bulletin
Number: 767-30-0039
Date: December 05, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Icing - Windshield 
Inspection and Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624T001 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.  An equivalent change is on subsequent 
production airplanes.  Refer to PRR B12901-56S for data about this change.
Airplane models:
767-200 767-300 767-300F
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AA 767 LLC  (SVX)
1V E 0 6 7
ABX AIR  (ABX)
1 VA301 VA303–VA306 VA309–VA315 VA508
VA803 VA807–VA809 VB101–VB123 VB125
VB302
AEROFLOT  (ARO)
1 VL896–VL897 VN471–VN472 VS216–VS217 VS321–VS324
VS392
GROUP CONFIGURATION DESCRIPTION
1 - Airplanes with windshields that use screw and 
lug electrical connections.

### Page 10

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
AEROMEXICO  (AMX)
1 VF071 VF093 VF162 VS211
AEROSVIT  (UKA)
1 VN154–VN155 VN157
AEROTURBINE  (AUB)
1 VB051 VB054–VB055 VB321–VB322
AIR ALGERIE  (ALG)
1 VK131–VK133
AIR ASTANA  (AKZ)
1 VL899–VL900
AIR CANADA  (ACN)
1 VA701–VA709 VA711–VA719 VB001–VB002 VB201–VB202
VN051–VN054 VN056–VN062 VN531 VN536
VN541–VN542 VN546–VN547 VN751–VN752 VN811–VN812
VN931–VN936 VS381–VS382 VS546–VS549
AIR CHINA  (BEJ)
1 VE064 VE083–VE086 VK161–VK164 VN388
VS206 VS208 VS274 VS307
AIR DO  (HIA)
1 VS176–VS177
AIR EUROPA  (ARE)
1 VN638 VS291–VS293
AIR ITALY  (RIT)
1 VL913
AIR MADAGASCAR  (MAD)
1V N 1 6 7 V N 7 3 1
AIR NEW ZEALAND  (ANZ)
1 VN653 VN655–VN658 VS113
AIR NIUGINI  (NIU)
1V N 6 5 1
AIR PACIFIC  (APC)
1V N 6 7 6
AIR SAHARA  (SAQ)
1V N 4 9 5
AIR SEYCHELLES  (ASY)
1 VL941 VS526

### Page 11

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
AIR TRANSPORT INTERNATIONAL  (TIN)
1 VA509–VA513
AIR ZIMBABWE  (ZMB)
1 VF061–VF062
ALITALIA  (ALI)
1 VL701–VL702 VN422–VN427 VN732 VN813
VS366–VS367 VS401
ALL NIPPON AIRWAYS  (ANA)
1 VK081–VK113 VN191–VN198 VR401 VS721–VS730
VT501
AMERICAN AIRLINES  (AAL)
1 VA501–VA505 VA514–VA525 VA527–VA530 VN001–VN041
VS196–VS203 VS751–VS759
ARAMCO ASSOCIATED COMPANY  (RAS)
1 VR084
ARKEFLY  (HXL)
1 VN156 VN164–VN165 VN225
ASIANA AIRLINES  (AAR)
1 VK143–VK148 VR426 VW851
AUSTRALIAN AIRLINES  (AUF)
1 VN089–VN092 VS486
AUSTRIAN  (AUL)
1 VN242–VN243 VN671 VS301–VS303
AVIANCA  (AVI)
1 VE171–VE172 VF072 VF092 VF161
VN152 VN532
AWAS  (AWW)
1V B 3 2 5
BELAIR AIRLINES  (BLB)
1 VL932
BELLVIEW AIRLINES  (BEB)
1 VE125–VE126
BLUE CITY HOLDING  (BCY)
1V E 0 6 9
BLUE PANORAMA AIRLINES  (BPA)
1 VN174 VN681 VS061

### Page 12

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
BOEING  (TBC)
1 VA001
BRA TRANSPORTES AEREOS  (BRW)
1 VA806 VN376
BRAVO AIRLINES  (BVA)
1 VE104
BRITISH AIRWAYS  (BAB)
1 VN111–VN114 VN118–VN122 VN124–VN127 VN133–VN137
VS246–VS248
CAMEROON AIRLINES  (CAM)
1 VA801 VS308
CHINA EASTERN YUNNAN AIRLINES  (YUN)
1 VL871–VL873
CONDOR  (CDF)
1 VN683–VN691
CONTINENTAL AIRLINES  (CAL)
1 VR051–VR060
CROCUS CORPORATION  (CCS)
1 VS825
CSDS AVIATION  (CSO)
1 VA506–VA507
DELTA AIR LINES  (DAL)
1 VA302 VK035–VK056 VL753 VN251–VN276
VN301–VN306 VR471–VR472 VS066–VS070 VS073–VS078
VS266–VS273 VS466–VS472
EDREES AVIATION  (SME)
1 VA804
EL AL ISRAEL AIRLINES  (ELA)
1 VB281–VB284 VF101–VF102 VN537 VN682
VN972
ERITREAN AIR LINES  (ERJ)
1 VE066
ETHIOPIAN AIRLINES  (ETH)
1 VE002 VL898 VS306 VS506–VS507
VS881
ETIHAD AIRWAYS  (ETI)
1 VS391

### Page 13

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
EUROATLANTIC AIRWAYS  (MAE)
1 VN151 VN551 VN561–VN562
EVERGREEN MAINTENANCE CENTER  (EAC)
1V E 0 6 1
FIRST CHOICE AIRWAYS  (ATZ)
1 VL751–VL752 VL754 VN791–VN792 VN921
FLYGLOBESPAN.COM  (FGS)
1 VN654 VS112
FLYJET LIMITED  (FJE)
1V E 1 1 7
GABON AIRLINES  (GBO)
1 VA017–VA018
GE CAPITAL CORPORATION  (GEF)
1V E 1 2 3
GULF AIR  (GUL)
1 VL004–VL006 VN307–VN310 VN313–VN314
HAINAN AIRLINES  (HNA)
1 VS426–VS428 VS496–VS497
HAWAIIAN AIRLINES  (HWI)
1 VK031–VK034 VN171–VN173 VN381 VS309–VS311
VS821–VS824 VS841–VS843
HEWA BORA AIRWAYS  (EXD)
1V E 0 2 1
ICELANDAIR  (ICE)
1 VN158 VN163 VN211
ITALIAN AIR FORCE  (ZSV)
1 VR086
ITOCHU CORPORATION  (CIT)
1 VF181–VF184
JAL INTERNATIONAL  (JAL)
1 VB371–VB373 VK001–VK016 VK021–VK022 VK181
VK186 VR441 VR461 VS701–VS709
JETAIRFLY  (TLB)
1 VN234
KALAIR (BERMUDA)  (KLB)
1 VN311

### Page 14

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
KENYA AIRWAYS  (KEN)
1 VK141 VL003 VN421 VS331–VS333
KRASAIR  (ZXD)
1 VE001 VE022–VE023 VF051
LAN AIRLINES  (LAN)
1 VL703 VN063–VN064 VN166 VN168
VN753 VN966–VN971 VR251 VR256–VR260
VS111 VS131–VS133
LOT POLISH AIRLINES  (LOT)
1 VF041–VF042 VN233 VN291–VN293 VN652
MALEV HUNGARIAN AIRLINES  (HGA)
1 VF171–VF172 VS136
MARTINAIR HOLLAND  (MTH)
1 VN221–VN224 VN385 VN672
MAXJET AIRWAYS  (SLQ)
1 VB301 VE041 VE063 VF001–VF002
MEXICANA  (CMA)
1 VL001–VL002
MID EAST JET  (SKL)
1V F 2 5 1
MYTRAVEL AIRWAYS  (GUE)
1 VN951–VN953
NATIONWIDE AIRLINES  (NWR)
1V N 5 5 6
NEOS  (NEO)
1 VL892 VL894
NORTH AMERICAN AIRLINES  (NNA)
1 VL755 VL895 VL911 VN922
VS316
OCEANAIR AIRLINES  (OAL)
1V N 5 0 0
PACE AIRLINES  (PIE)
1 VB053
PHOENIX AIRCRAFT LEASING, INC.  (PLB)
1 VA810
PLUNA  (PLU)
1V N 4 3 6

### Page 15

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
PRIVATAIR  (PTS)
1V S 1 3 7
QANTAS  (QAN)
1 VN081–VN088 VN093–VN099 VN115–VN117 VN123
VN130–VN132 VS186–VS187
ROYAL AIR MAROC  (RAM)
1 VN636 VS336–VS337
ROYAL BRUNEI AIRLINES  (RBA)
1 VN372 VN382–VN384 VN386–VN387
SALAMIS AVIATION  (LMV)
1V E 0 6 8
SHANGHAI AIRLINES  (SHA)
1 VK171 VR421–VR423 VS207
SILVERJET  (SVJ)
1V B 3 3 0
SKYMARK AIRLINES  (SKM)
1 VN637 VS231 VS261–VS263 VS861
SKYSTAR  (SYW)
1 VA011–VA012
STAR AIR  (SBJ)
1 VA307–VA308 VB323 VB328 VB441–VB444
VE101–VE103
STATE AIR COMPANY "BERKUT"  (ORE)
1 VR081
TAA  (TNL)
1 VA002–VA003 VA006 VA009–VA010 VA014–VA015
VA019–VA020
TAMPA CARGO  (TMP)
1 VE121–VE122 VE124
TEEBAH AIRLINES  (EBH)
1V A 7 1 0
THE SULTAN'S FLIGHT  (BWN)
1V F 1 8 0
THOMSONFLY  (BRI)
1 VB329 VB331–VB332 VL912 VL914
VS051–VS056

### Page 16

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
TRANS-AUSTRALIA AIRLINES  (TAA)
1 VA007–VA008
TRANSAERO AIRLINES  (TRX)
1 VE116 VE118 VE143 VN371
VN631–VN633
TRANSATLANTIC INTL AIRLINES  (TIB)
1 VA016
UK INTERNATIONAL AIRLINES  (UKI)
1 VA004–VA005
UNITED AIRLINES  (UAL)
1 VN491–VN494 VN496–VN499 VN501–VN513 VS091–VS104
UPS  (UPS)
1 VR201–VR211 VW701–VW721
US AIRWAYS  (USA)
1 VE141–VE142 VE144–VE149 VE151–VE152
UZBEKISTAN AIRWAYS  (UZB)
1 VL806–VL807 VS844
VARIG AIRLINES  (VAR)
1 VN055 VN231–VN232
VIVA MACAU  (VMC)
1 VF091 VK142
VOLARE S.P.A  (VLR)
1 VL931
XL AIRWAYS  (SBE)
1 VB326–VB327 VL011 VN153 VN557
YONA  (IOP)
1V N 3 1 2
ZOOM AIRLINES  (YFM)
1 VL891 VL893 VN634–VN635
IDENTIFICATION BY VARIABLE NUMBER
Variable  Group
VA001–VA020 1
VA301–VA315 1
VA501–VA530 1
VA701–VA719 1
VA801–VA810 1

### Page 17

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
VB001–VB002 1
VB051–VB055 1
VB101–VB125 1
VB201–VB202 1
VB251–VB253 1
VB281–VB284 1
VB301–VB302 1
VB321–VB332 1
VB371–VB373 1
VB401 1
VB441–VB444 1
VE001–VE003 1
VE021–VE023 1
VE041–VE043 1
VE061–VE069 1
VE083–VE086 1
VE101–VE104 1
VE116–VE118 1
VE121–VE126 1
VE141–VE152 1
VE171–VE172 1
VF001–VF002 1
VF041–VF042 1
VF051 1
VF061–VF062 1
VF071–VF072 1
VF091–VF093 1
VF101–VF102 1
VF161–VF162 1
VF171–VF172 1
VF180–VF184 1
VF251 1
VK001–VK016 1
VK021–VK022 1
VK031–VK056 1
VK081–VK113 1
VK131–VK133 1
VK141–VK148 1
VK161–VK164 1
Variable  Group

### Page 18

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
VK171 1
VK181 1
VK186 1
VL001–VL006 1
VL011 1
VL701–VL703 1
VL751–VL755 1
VL806–VL807 1
VL871–VL873 1
VL891–VL900 1
VL911–VL914 1
VL931–VL932 1
VL941 1
VN001–VN041 1
VN051–VN064 1
VN081–VN099 1
VN111–VN127 1
VN130–VN137 1
VN151–VN158 1
VN163–VN168 1
VN171–VN174 1
VN191–VN198 1
VN211–VN212 1
VN221–VN225 1
VN231–VN234 1
VN241–VN243 1
VN251–VN276 1
VN291–VN293 1
VN301–VN314 1
VN371–VN372 1
VN376 1
VN381–VN388 1
VN421–VN427 1
VN436 1
VN471–VN472 1
VN491–VN513 1
VN531–VN532 1
VN536–VN537 1
VN541–VN542 1
Variable  Group

### Page 19

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
VN546–VN547 1
VN551 1
VN556–VN557 1
VN561–VN562 1
VN631–VN638 1
VN651–VN658 1
VN671–VN672 1
VN676 1
VN681–VN691 1
VN731–VN732 1
VN751–VN753 1
VN791–VN792 1
VN811–VN813 1
VN921–VN922 1
VN931–VN936 1
VN951–VN953 1
VN966–VN972 1
VR051–VR060 1
VR081 1
VR084 1
VR086 1
VR201–VR211 1
VR251 1
VR256–VR260 1
VR401 1
VR421–VR423 1
VR426 1
VR441 1
VR461 1
VR471–VR472 1
VS051–VS056 1
VS061 1
VS066–VS070 1
VS073–VS078 1
VS091–VS104 1
VS111–VS113 1
VS131–VS133 1
VS136–VS137 1
VS176–VS177 1
Variable  Group

### Page 20

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 51
 
 
VS186–VS187 1
VS196–VS203 1
VS206–VS208 1
VS211 1
VS216–VS217 1
VS231 1
VS246–VS248 1
VS261–VS263 1
VS266–VS274 1
VS291–VS293 1
VS301–VS303 1
VS306–VS311 1
VS316 1
VS321–VS324 1
VS331–VS333 1
VS336–VS337 1
VS366–VS367 1
VS381–VS382 1
VS391–VS392 1
VS401 1
VS426–VS428 1
VS466–VS472 1
VS486 1
VS496–VS497 1
VS506–VS507 1
VS526 1
VS546–VS549 1
VS701–VS709 1
VS721–VS730 1
VS751–VS759 1
VS821–VS825 1
VS841–VS844 1
VS861 1
VS881 1
VT501 1
VW701–VW721 1
VW851 1
Variable  Group

### Page 21

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 51
 
 
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts 
Necessary for Each Airplane.  If any parts or components are found, refer to Paragraph 2.C. for 
the recommended use.
B. Concurrent Requirements
None
C. Reason
This service bulletin gives instructions to do an inspection of an electrical connection on the left and 
the right windshields.  Instructions are also given to replace the windshields and make changes to their 
related wire bundles.  A new windshield design is available that uses a different electrical connection.  
When the changes given in this bulletin are done, the windshields will have better electrical 
connections.  The new connections are made with pins and sockets.  The pin and socket connections 
will prevent the risk of electrical arcs as a result of loose connections.
Boeing received nine reports from eight operators of electrical arcs at the terminal blocks of the flight 
compartment windows.  More than one of these reports included data to show that the results of the 
arcs were open flame incidents.  One operator found an indication of damage at a terminal and 
tightened a loose connection.  The terminal has internal damage that could not be seen.  Less than 
six months after the connection was tightened there was a report from the operator of an open flame 
incident on the same windshield.
The electrical connections on the windows are made with lugs that are attached with screws.  The 
windshield is the number 1 window in the flight compartment.  All of the windows in the flight 
compartment are electrically heated.  The windshield gets a much larger electrical load. 
An investigation found that the cause of the electrical arcs is loose terminal connections.  A loose 
connection increases the heat at the terminal which can cause damage to the internal solder joint.  
Damaged solder joints are the primary cause for the electrical arcs.  The primary causes of loose 
connections are the incorrect torque of the screw or an incorrectly installed screw.
The inspection given in this service bulletin is to look for damage or a loose electrical connection on 
the windshield.  If there are indications of electrical arcs or damage to the electrical connection, the 
windshield is replaced.  If there is a loose electrical connection, the correct torque is applied to tighten 
it.  If a connection cannot be tightened to the correct torque, the windshield is replaced.  When a 
windshield with an electrical connection that uses pins and sockets is installed, the related wire bundle 
on the airplane is changed.
Boeing Service Related Problem (SRP) 767-SRP-56-0015 is related to this service bulletin.
D. Description
In the flight compartment, an inspection is done of the left and the right windshields.  A windshield that 
uses pin and socket electrical connections is installed.  The bulb seal is cut to give clearance for 
terminals that are on the new windshield.  When a windshield that uses the pin and socket electrical 
connections is installed, the related wire bundle is also changed.
The changes in this service bulletin will not change the Engine Indication and Crew Alerting System 
(EICAS).

### Page 22

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 51
 
 
E. Compliance
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity.  This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
Compliance Sequence
Condition Action Compliance Time Repeat Interval 
Windshield that uses 
screws and lugs for the 
electrical connections
Do the Inspections given in 
Work Packages 1 and 2
Within 500 flight hours 
after the date on this 
service bulletin.
Every 6000 flight hours 
until Work Packages 3 
and 4 are done.
Windshield replaced 
with the same screw and 
lug type windshield
Do the Inspections given in 
Work Packages 1 and 2.
Within 500 flight hours of 
windshield replacement.
Every 6000 flight hours 
until Work Packages 3 
and 4 are done.
Windshield that uses 
screws and lugs for the 
electrical connections
Replace with windshield 
that uses pins and sockets 
for the electrical 
connections
No time limit. Terminating action for 
this bulletin.

### Page 23

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 51
 
 
G. Manpower
The table below shows an estimate of the task-hours necessary to do this change for each windshield.  
This estimate is for direct labor only, done by an experienced crew.  Adjust the estimate with operator 
task-hour data if necessary.  The estimate does not include lost time.  These are some examples of 
lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Work Package  1 - Inspection of the Left Windshield
Task
Number of 
Persons Task-Hours Elapsed Hours
Figure 1 1 0.25 0.25
Total per Windshield 0.25 0.25
Work Package  2 - Inspection of the RIght Windshield
Task
Number of 
Persons Task-Hours Elapsed Hours
Figure 2 1 0.25 0.25
Total per Windshield 0.25 0.25
Work Package  3 - Replacement of the Left Windshield and Changes to the Related Wiring
Task
Number of 
Persons Task-Hours Elapsed Hours
Access 2 1.0 0.50
Remove the Left Windshield 2 2.5 1.25
Figure 3 - Cut the Bulb Seal 1 0.25 0.25
Figures 4 and 5 - Change the 
Wiring
1 0.50 0.50
Install the Left Windshield 2 3.0 1.5
Tests 1 0.25 0.25
Close 2 1.0 0.50
Total per Windshield 8.5 4.75
Work Package  4 - Replacement of the Right Windshield and Changes to the Related Wiring
Task
Number of 
Persons Task-Hours Elapsed Hours
Access 2 1.0 0.50
Remove the Right Windshield 2 2.5 1.25
Figure 6 - Cut the Bulb Seal 1 0.25 0.25
Figures 7 and 8 - Change the 
Wiring
1 0.50 0.50

### Page 24

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
H. Weight and Balance Changes
None
I. Electrical Load Data
Not changed
J. References
1. Existing Data:
a. Engineering Change Memo PRR B12901-56S
b. Service Related Problem (SRP) 767-SRP-56-0015
c. 767 Aircraft Maintenance Manual (AMM)  30-41-00, 56-11-01
d. 767 Wiring Diagram  30-41-11, 30-41-12
e. Standard Wiring Practices Manual (SWPM)  20-10-11, 20-10-12, 20-10-13, 20-10-18, 
20-10-19, 20-30-12, 20-63-19, 20-64-16
f. Standard Overhaul Practices Manual (SOPM)  20-41-02, 20-43-03, 20-50-10
g. Boeing Service Bulletin 767-56-0012
2. Data supplied with this Service Bulletin:
None
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None
Install the Right Windshield 2 3.0 1.5
Tests 1 0.25 0.25
Close 2 1.0 0.50
Total per Windshield 8.5 4.75
Work Package  4 - Replacement of the Right Windshield and Changes to the Related Wiring
Task
Number of 
Persons Task-Hours Elapsed Hours

### Page 25

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
K. Publications Affected
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability 
information.
Publication Chapter-Section
767 Maintenance Manual 30-41, 56-11
767 Wiring Diagram Manual 30-41
767 Illustrated Parts Catalog 56-11

### Page 26

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
BLANK PAGE

### Page 27

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary For Each Airplane as shown 
below.  Kit availability is shown in the Reorder Lead Time (ROLT).  ROLT is calculated from the date 
Boeing gets the purchase order.
The kits are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgment.  After the Unit Price date, new price and ROLT data is applicable.  Prices are in 
United States dollars.  Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:  
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington   98124-2207  USA
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
Kit Number Name
ROLT 
(Weeks)
Unit Price thru
Dec 31/2007
015T0500-1 Top Kit - Left Windshield, PPG 
with Hydrophobic coating
20 $15,767.00
015T0500-2 Top Kit - Right Windshield, 
PPG with Hydrophobic coating
20 $15,767.00

### Page 28

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One left top kit and one right top kit and the items shown in Paragraph 2.C.2., Parts and
Materials Supplied by the Operator, are necessary for each airplane. 
Kit 015T0500                        
New Part Number
QTY
Name
Existing Part 
Number Notes-2 -1
015T0500-1 . - Top Kit - Left Windshield,  
PPG with Hydrophobic 
coating
015T0500-2 - . Top Kit - Right 
Windshield,  PPG with 
Hydrophobic coating
141W7400-43 . 1 PPG Left Windshield  
with Hydrophobic coating
141T4801-49 (a) (b) (c) 
(d) (e) 
(g) (i) 
141W7400-44 1 . PPG Right Windshield 
with Hydrophobic coating
141T4801-50 (a) (b) (c) 
(d) (f)
(h) (i) 
289T1146-1 . 1 Wire Kit - Change to the 
Left Windshield Terminal 
Connectors 
289T1146-2 1 . Wire Kit - Change to the 
Right Windshield 
Terminal Connectors 
(a) Discard the existing part 
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
(d) Operators can install Left Windshield part number 141T4801-59 and Right Windshield part number 
141T4801-60 with serial numbers 04xxxH or 05xxxH. 
(e) As an option operators can install Left Windshield part number 141W7400-31 or 141W7400-33 with 
serial numbers 04xxxH or 05xxxH.
(f) As an option operators can install Right Windshield part number 141W7400-32 or 141W7400-34 with 
serial numbers 04xxxH or 05xxxH.

### Page 29

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
(g) As an option operators can install Left Windshield part number 141W7400-35 or 141W7400-41. 
Windshield part numbers 141W7400-35 and141W7400 -41 can be made from Windshield part numbers 
141W7400-31 and 141W7400-33 with serial numbers 06339H or higher by incorporating Boeing Service 
Bulletin 767-56-0012.
(h) As an option operators can install Right Windshield part number 141W7400-36 or 141W7400-42. 
Windshield part numbers 141W7400-36 and 141W7400-42 can be made from Windshield part numbers 
141W7400-32 and 141W7400-34 with serial numbers 06339H or higher by incorporating Boeing Service 
Bulletin 767-56-0012.
(i) PPG Aerospace - Transparencies Div Glass  (V53117) 
     1719 U.S. Highway 72 East 
      P.O. Box 2200
     Huntsville, AL  35811 - 9660 
Kit 289T1146                        
New Part Number
QTY
Name Notes-102 -101 -2 -1
289T1146-1 . . . - Wire Kit - Change to the 
Left Windshield Terminal 
Connectors 
289T1146-2 . . - . Wire Kit - Change to the 
Right Windshield 
Terminal Connectors 
289T1146-101 . - 1 . Wire Bundle Assembly  
W0622
289T1146-102 - . . 1 Wire Bundle Assembly  
W0624
- . 1 . . Wire Identified 
W0622-051-12
(a)
- . 1 . . Wire Identified 
W0622-052-12
(a)
- 1 . . . Wire Identified 
W0624-051-12
(a)
- 1 . . . Wire Identified 
W0624-052-12
(a)
D436-38 3 3 . . Splice (b)
M39029/57-359 3 3 . . Socket Contact (b)
NA728R99 1 1 . . BMS 13-52    Expandable 
Sleeve
(a) BMS 13-48, Type 10, Class 1, AWG 12, length 84 inches
(b) There are more parts than are necessary.
Kit 015T0500                        
New Part Number
QTY
Name
Existing Part 
Number Notes-2 -1

### Page 30

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
2. Parts and Materials Supplied by the Operator:
3. Parts Modified and Reidentified:
The parts shown below are changed as shown in this service bulletin.  The quantity (QTY) is the 
number of parts changed on each airplane.
4. Parts Removed and Not Replaced:
None
D. Parts Necessary to Change Spares
None
Part Number / 
Specification QTY Name Notes
BMS 13-54 10 feet Lacing Tape, Red (a) (b) (c) 
BMS 13-54 10 feet Lacing Tape, Green (a) (b) (d)
(a)  Type 3, Class 1
(b)  Gudebrod Incorporated (V82110)
       Griffith Towers 
       PO Box 357
       Pottstown, PA 19464
(c)  BACS38K5C, red Tie Strap is optional.  See the Qualified Products List at the end 
of the Boeing Material Specification (BMS) for the supplier data.
(d)  BACS38K5F, green Tie Strap is optional.  See the Qualified Products List at the 
end of the Boeing Material Specification (BMS) for the supplier data.
Existing Part 
Number QTY Name New Part Number Notes
233T8300-34 1 Glareshield 233T8300-51 (a) (b)
233T8300-35 1 Glareshield 233T8300-52 (a) (b)
(a)  Make the change given in this service bulletin.
(b) This part is used in production.

### Page 31

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
E. Special Tooling - Price and Availability
Boeing can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this Service 
Bulletin.  Send a Purchase Order to the Director of Spares.  Give this service bulletin number and the 
date the tools will be used.
The kits are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgement.  After the Price date, new price data is applicable.  Prices are in United States 
dollars.  Terms:  Net 30 days.
Reference this service bulletin number and submit purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207  USA
(Service Bulletin 767-30-0039)
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.  
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be 
necessary.  Examine operator tool supply to make sure all necessary tools are available.
Purchase Data:
Tool Kit Number Name
Unit Price
  thru 
Dec 31/2007
A56001-2 (part of 
Sling Set A56001-15)
Windshield Handling Sling $625.00
Tool Kit Number Name
A56001-2 (part of 
Sling Set A56001-15)
Windshield Handling Sling

### Page 32

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
BLANK PAGE

### Page 33

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS.  UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES.  DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. Manual titles are referred to by acronyms.  Refer to Paragraph 1.J., References, for 
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages.  Task-Hours and Elapsed-Hours 
for each package are given in Paragraph 1.G., Manpower.  You can do each work 
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Torque limits to tighten nuts and bolts are given in 767 Structural Repair Manual, 
Chapter 51.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures.
6. A Detailed Inspection is defined as:  An intensive examination of a specific item, 
installation, or assembly to detect damage, failure, or irregularity.  Available lighting is 
normally supplemented with a direct source of good lighting at an intensity deemed 
appropriate.  Inspection aids such as mirrors magnifying lenses, etc. may be necessary.  
Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included on other Boeing documents.  
When the words "refer to" are used and the operator has an accepted alternative 
procedure, the accepted alternative procedure can be used.  When the words "as given 
in" are included in the instruction, the procedure in the Boeing document must be used.

### Page 34

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
B. WORK INSTRUCTIONS
WORK PACKAGE 1 - INSPECTION OF THE LEFT WINDSHIELD
WARNING: BEFORE YOU DO MAINTENANCE ON THE WINDSHIELD HEAT SYSTEM, OPEN
THE CIRCUIT BREAKER GIVEN IN THE STEP THAT FOLLOWS.  IF THIS CIRCUIT
BREAKER IS NOT OPEN, YOU CAN GET AN ELECTRICAL SHOCK WHEN YOU
TOUCH THE TERMINAL.
1. Open this circuit breaker and attach a DO-NOT-CLOSE tag to it:
2. Do an inspection of the left windshield as given in Figure 1.   
3. If the left windshield is not in a serviceable condition, replace it before the subsequent revenue 
flight.  Refer to 767 AMM 56-11-01 as an accepted procedure.  If the existing windshield is 
replaced with one of the same type, it will be necessary to do this inspection again within 500 
flight hours.  Windshields in serviceable condition can continue to be used with inspections every 
6000 flight hours, or until the work given in Work Package 3 is done.  
4. Remove the DO-NOT-CLOSE tag and close this circuit breaker:
Panel  Position Name Circuit Breaker
P36 G6, or H4, or L5 WINDOW HT NO 1, LEFT C391
Panel  Position Name Circuit Breaker
P36 G6, or H4, or L5 WINDOW HT NO 1, LEFT C391

### Page 35

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 35 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
WORK PACKAGE 2 - INSPECTION OF THE RIGHT WINDSHIELD
WARNING: BEFORE YOU DO MAINTENANCE ON THE WINDSHIELD HEAT SYSTEM, OPEN
THE CIRCUIT BREAKER GIVEN IN THE STEP THAT FOLLOWS.  IF THIS CIRCUIT
BREAKER IS NOT OPEN, YOU CAN GET AN ELECTRICAL SHOCK WHEN YOU
TOUCH THE TERMINAL.
1. Open this circuit breaker and attach a DO-NOT-CLOSE tag to it:
2. Do an inspection of the right windshield as given in Figure 2.   
3. If the right windshield is not in a serviceable condition, replace it before the subsequent revenue 
flight.  Refer to 767 AMM 56-11-01 as an accepted procedure.  If the existing windshield is 
replaced with one of the same type, it will be necessary to do this inspection within 500 flight 
hours.  Windshields in serviceable condition can continue to be used with inspections every 6000 
flight hours, or until the work given in Work Package 4 is done.
4. Remove the DO-NOT-CLOSE tag and close this circuit breaker:
Panel  Position Name Circuit Breaker
P37 F1, or F4, or D2 WINDOW HT NO 1, RIGHT C392
Panel  Position Name Circuit Breaker
P37 F1, or F4, or D2 WINDOW HT NO 1, RIGHT C392

### Page 36

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 36 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
WORK PACKAGE 3 - REPLACEMENT OF THE LEFT WINDSHIELD AND CHANGES TO THE 
RELATED WIRE BUNDLE
WARNING: THE WINDOW HEAT SYSTEM MUST BE DISARMED WHEN YOU REMOVE THE
WINDOWS. IF THE WINDOW POWER IS ON, YOU CAN GET AN ELECTRICAL
SHOCK WHEN YOU TOUCH THE WINDOW. THE SHOCK CAN CAUSE INJURY TO
PERSONS.
1. Open this circuit breaker and attach a DO-NOT-CLOSE tag to it:
2. Remove the left windshield.  Use the windshield handling sling,  A56001-2.  Refer to 767 AMM 
56-11-01 as an accepted procedure.
3. Trim the bulb seal for the left windshield as given in Figure 3.
4. Change the wiring for the window heat on the left windshield as given in Figure 4 and Figure 5.
5. Install the left windshield.  Use the windshield handling sling,  A56001-2.  Refer to 767 AMM 
56-11-01 as an accepted procedure. The new windshield information is shown below: 
6. Remove the DO-NOT-CLOSE tag and close this circuit breaker:
7. Do the test "Operational Test - Flight Compartment Window Anti-Icing System" as given in 767 
AMM 30-41-00.
8. Put the airplane in a serviceable condition.
Panel  Position Name Circuit Breaker
P36 G6, or H4, or L5 WINDOW HT NO 1, LEFT C391
Supplier Part Number Description Part of Top Kit
PPG 141W7400-43 Hydrophobic 
Coating
015T0500-1
Panel  Position Name Circuit Breaker
P36 G6, or H4, or L5 WINDOW HT NO 1, LEFT C391

### Page 37

December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 37 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
WORK PACKAGE 4 - REPLACEMENT OF THE RIGHT WINDSHIELD AND CHANGES TO THE 
RELATED WIRE BUNDLE
WARNING: THE WINDOW HEAT SYSTEM MUST BE DISARMED WHEN YOU REMOVE THE
WINDOWS. IF THE WINDOW POWER IS ON, YOU CAN GET AN ELECTRICAL
SHOCK WHEN YOU TOUCH THE WINDOW. THE SHOCK CAN CAUSE INJURY TO
PERSONS.
1. Open this circuit breaker and attach a DO-NOT-CLOSE tag to it:
2. Remove the right windshield.  Use the windshield handling sling,  A56001-2.  Refer to 767 AMM 
56-11-01 as an accepted procedure.
3. Trim the bulb seal for the right windshield as given in Figure 6.
4. Change the wiring for the window heat on the right windshield as given in Figure 7 and Figure 8.
5. Install the right windshield.  Use the windshield handling sling,  A56001-2.  Refer to 767 AMM 
56-11-01 as an accepted procedure.  The new windshield information is shown below: 
6. Remove the DO-NOT-CLOSE tag and close this circuit breaker:
7. Do the test "Operational Test - Flight Compartment Window Anti-Icing System" as given in 767 
AMM 30-41-00.
8. Put the airplane in a serviceable condition.
Panel  Position Name Circuit Breaker
P37 F1, or F4, or D2 WINDOW HT NO 1, RIGHT C392
Supplier Part Number Description Part of Top Kit
PPG 141W7400-44 Hydrophobic Coating 015T0500-2
Panel  Position Name Circuit Breaker
P37 F1, or F4, or D2 WINDOW HT NO 1, RIGHT C392

### Page 38

FIGURE 1: INSPECTION OF THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  1: INSPECTION OF THE LEFT WINDSHIELD
FWD
INBD
1
CONNECTOR
BLOCK,
TERMINAL
J5 3 SCREW
LUG2
J1 J4
W0622
AREA
SPLICE
481732
(SHEET 1 OF 2)

### Page 39

FIGURE 1: INSPECTION OF THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 39 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. 
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1
Inspect Terminal Block - 1 at the J5 connection
Connector - 1
Wiring Wire bundle W0622 1
NOTE: If there is a melted terminal, black marks, or discoloration, the window
must be replaced.
NOTE: If there is damage to the wiring, it must be repaired.  Refer to Standard
Wiring Practices Manual SWPM 20-10-13 as an accepted procedure.
2
Inspect Lug - 1 to make sure it is a 
tight connection.
NOTE: If the lug at the terminal moves with light manual pressure, then the
screw that attaches it must be tightened.  There are three causes for a
loose terminal.
1-The screw is not tightened to the correct torque
2-The terminal is damaged
3-The incorrect screw is installed. The correct screw part number is
given in SWPM 20-64-16.
CAUTION: DO NOT OVER TIGHTEN.  THE TERMINAL CAN BE DAMAGED BY TOO
MUCH FORCE.  A DAMAGED TERMINAL WILL REQUIRE THE
REPLACEMENT OF THE WINDOW.
3
Turn Screw - 1 to 25 to 30 inch 
pounds of torque. 
Inspect Lug 1 to make sure the 
connection is tight. 
NOTE: The screw is only tightened if the lug is loose.  If it is the correct screw
and it cannot be tightened to 25 to 30 inch pounds, the window must be
replaced.
(SHEET 2 OF 2)

### Page 40

FIGURE 2: INSPECTION OF THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 40 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  2: INSPECTION OF THE RIGHT WINDSHIELD
FWD
INBD
TERMINAL
BLOCK,
CONNECTOR
1
3 SCREW
J5LUG
2
J1J4
AREA
SPLICE
W0624
481733
(SHEET 1 OF 2)

### Page 41

FIGURE 2: INSPECTION OF THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 41 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. 
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1
Inspect Terminal Block - 1 at the J5 connection
Connector - 1
Wiring Wire bundle W0624 1
NOTE: If there is a melted terminal, black marks, or discoloration, the window
must be replaced.
NOTE: If there is damage to the wiring, it must be repaired.  Refer to Standard
Wiring Practices Manual SWPM 20-10-13 as an accepted procedure.
2
Inspect Lug - 1 to make sure it is a 
tight connection.
NOTE: If the lug at the terminal moves with light manual pressure, then the
screw that attaches it must be tightened.  There are three causes for a
loose terminal.
1-The screw is not tightened to the correct torque
2-The terminal is damaged
3-The incorrect screw is installed. The correct screw part number is
given in SWPM 20-64-16.
CAUTION: DO NOT OVER TIGHTEN.  THE TERMINAL CAN BE DAMAGED BY TOO
MUCH FORCE.  A DAMAGED TERMINAL WILL REQUIRE THE
REPLACEMENT OF THE WINDOW.
3
Turn Screw - 1 to 25 to 30 inch 
pounds of torque. 
Inspect Lug 1 to make sure the 
connection is tight. 
NOTE: The screw is only tightened if the lug is loose.  If it is the correct screw
and it cannot be tightened to 25 to 30 inch pounds, the window must be
replaced.
(SHEET 2 OF 2)

### Page 42

FIGURE 3: CUT THE BULB SEAL FOR THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 42 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  3: CUT THE BULB SEAL FOR THE LEFT WINDSHIELD
GLARESHIELD
1 1.201.40
BULB SEAL
2
481734
(SHEET 1 OF 2)

### Page 43

FIGURE 3: CUT THE BULB SEAL FOR THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 43 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.  The QTY 
numbers shown below are the number of parts necessary for one side of the airplane.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
CAUTION: DO NOT CUT THE STRUCTURE BELOW THE BULB SEAL.  THE WINDOW
SILL IS A HIGH MOISTURE AREA AND MOISTURE CAN CAUSE CORROSION
IF THE FINISH IS DAMAGED.  DAMAGE TO THE FINISH MUST BE REPAIRED. 
1
Cut Bulb Seal 233T8300-7 - to clear the new 
terminal.
NOTE: If the finish below the bulb seal is damaged, it must be sealed with chemical
treatment and primer.  Refer to Standard Overhaul Practices Manual SOPM
20-41-02 and SOPM 20-43-03 as accepted procedures.
2 Identify Glareshield 233T8300-51 - (a)
(a) Part mark with new part number.  Rubber-Stamp, Silkscreen or Hand Write.  12 characters 
per inch.  Use abrasive resistance ink.  Refer to SOPM 20-50-10 as an accepted procedure. 
(SHEET 2 OF 2)

### Page 44

FIGURE 4: CHANGES TO THE WIRING FOR THE WINDOW HEAT WIRING ON THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 44 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  4: CHANGES TO THE WIRING FOR THE WINDOW HEAT WIRING ON THE LEFT WINDSHIELD
(J5)
(J4)
D1660
D1658
W0622
209R-12
209B-12
SM14
SM13
SM14
SM13
052-12
051-12 J1
J5
B35 LEFT WINDOW 1
A-C
B35 LEFT WINDOW 1
=1
=1
=1
A-B
A-A
D1656 (J1)
2
1
4
5
5
3
3 4
479296
REFERENCE: WIRING DIAGRAM 30-41-11
DELETED WIRE OR FORMER ROUTING
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
(SHEET 1 OF 2)

### Page 45

FIGURE 4: CHANGES TO THE WIRING FOR THE WINDOW HEAT WIRING ON THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 45 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
FLAG 
NOTE NAME IDENTIFICATION QTY MORE DATA
1 Wire BMS 13-48, Type 10, 
Class 1, AWG 12
1
2 Wire BMS 13-48, Type 10, 
Class 1, AWG 12
1
Lacing Tape BMS 13-54, Type 3, 
Class 1, Red
- or optional BACS38K5C Tie Strap.
Red is for left channel separation.  
Refer to Standard Wiring Practices 
Manual SWPM 20-10-19 as an 
accepted procedure.
3 Sleeve NA728R99 2 Refer to SWPM 20-10-18 as an 
accepted procedure.
4 Socket Contact M39029/57-359 2 Refer to SWPM 20-63-19 as an 
accepted procedure.
NOTE: Isopropyl alcohol is applied to the installation tool and on the contact before
installation of the contact. Isopropyl alcohol is a lubricant that helps with
installation of the contact in the connector.
5 Splice D-436-38 2 Refer to SWPM 20-30-12 as an 
accepted procedure.
(SHEET 2 OF 2)

### Page 46

FIGURE 5: WIRE ROUTING FOR THE WINDOW HEAT ON THE LEFT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  5: WIRE ROUTING FOR THE WINDOW HEAT ON THE LEFT WINDSHIELD
FWD
INBD
J1
W0622
W0622
J5
AREA
SPLICE
481736
(SHEET 1 OF 1)

### Page 47

FIGURE 6:  CUT THE BULB SEAL FOR THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  6:  CUT THE BULB SEAL FOR THE RIGHT WINDSHIELD
GLARESHIELD
1.401
BULB SEAL
1.20
2
481737
(SHEET 1 OF 2)

### Page 48

FIGURE 6:  CUT THE BULB SEAL FOR THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 48 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.  The QTY 
numbers shown below are the number of parts necessary for one side of the airplane.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
CAUTION: DO NOT CUT THE STRUCTURE BELOW THE BULB SEAL.  THE WINDOW
SILL IS A HIGH MOISTURE AREA AND MOISTURE CAN CAUSE CORROSION
IF THE FINISH IS DAMAGED.  DAMAGE TO THE FINISH MUST BE REPAIRED. 
1
Cut Bulb Seal 233T8300-8 - to clear the new 
terminal.
NOTE: If the finish below the bulb seal is damaged, it must be sealed with chemical
treatment and primer.  Refer to Standard Overhaul Practices Manual SOPM
20-41-02 and SOPM 20-43-03 as accepted procedures.
2 Identify Glareshield 233T8300-52 - (a)
(a) Part mark with new part number.  Rubber-Stamp, Silkscreen or Hand Write.  12 characters 
per inch.  Use abrasive resistance ink.  Refer to SOPM 20-50-10 as an accepted procedure. 
(SHEET 2 OF 2)

### Page 49

FIGURE 7: CHANGES TO THE WIRING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 49 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  7: CHANGES TO THE WIRING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD
B38 RIGHT WINDOW 1
B38 RIGHT WINDOW 1
D1670
D1668
D1666
201R-12
201B-12
W0624
(J5)
(J4)
SM14
SM13
SM14
SM13
052-12
051-12 J1
J5
A-C
=1
=1
=1
A-B
A-A
(J1)
2
1
4
5
5
3
3 4
480249
REFERENCE: WIRING DIAGRAM 30-41-12
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 2)

### Page 50

FIGURE 7: CHANGES TO THE WIRING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 50 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
FLAG 
NOTE NAME IDENTIFICATION QTY MORE DATA
1 Wire BMS 13-48, Type 10, 
Class 1, AWG 12
1
2 Wire BMS 13-48, Type 10, 
Class 1, AWG 12
1
Lacing Tape BMS 13-54, Type 3, 
Class 1, Green
- or optional BACS38K5F Tie Strap. Green is 
for right channel separation.  Refer to 
Standard Wiring Practices Manual SWPM 
20-10-19 as an accepted procedure.
3 Sleeve NA728R99 2 Refer to SWPM 20-10-18 as an accepted 
procedure.
4 Socket Contact M39029/57-359 2 Refer to SWPM 20-63-19 as an accepted 
procedure.
NOTE: Isopropyl alcohol is applied to the installation tool and on the contact before
installation of the contact. Isopropyl alcohol is a lubricant that helps with installation
of the contact in the connector.
5 Splice D-436-38 2 Refer to SWPM 20-30-12 as an accepted 
procedure.
(SHEET 2 OF 2)

### Page 51

FIGURE 8: WIRE ROUTING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD
December 05, 2007
767-30-0039
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 51 of 51
BOEING SERVICE BULLETIN 767-30-0039
 
 
FIGURE  8: WIRE ROUTING FOR THE WINDOW HEAT ON THE RIGHT WINDSHIELD
J1
J5
FWD
INBD
W0624
W0624
SPLICE
AREA
481738
(SHEET 1 OF 1)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
