# Boeing Service Bulletin 767-31-0073: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0797; AD 2017-01-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 767-31-0073](https://openairdocs.org/service-documents/boeing/sb-767-31-0073.md)
- Title as filed: U.S. DOT/FAA - SB-767-31-0073-00
- Pages: 53
- PDF: https://openairdocs.org/files/sha256/d8/39/d839d98e5e09548fb9791769b962635d0009582d34ec639cdf2ec22b58ac27ac
- Page: https://openairdocs.org/service-documents/boeing/sb-767-31-0073/file/d839d98e5e09

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial
Airplane
Group
767
Service Bulletin
Number: 767-31-0073 SummaryDate: October 12, 1995
ATA System: 3141
SUBJECT: INDICATING/RECORDING SYSTEMS - CENTRAL COMPUTERS - INFLIGHT EICAS
MAINTENANCE DATA SELECTION SYSTEM INSTALLATION
BACKGROUND
The change given in this service bulletin will let the
EICAS maintenance messages to be shown when
the airplane is at or above 10,000 feet.
Currently EICAS maintenance messages can be
shown only when the airplane is on the ground.
This modification will let the EICAS maintenance
messages be selected for display when the airplane
is at or above 10,000 feet.
As part of a service bulletin validation program, this
change was completed on airplane VL754 before
the release of the service bulletin. Airplane VL754
has the configuration of a Group 4 airplane.
ACTION (PRR B12654)
- On Groups 1-3 and 6-8 airplanes: install EICAS
enable bypass switch E8 E rack.
- Install the altitude pressure switch and pressure
tubing on E8 rack.
- Make a modification to the EICAS maintenance
system wiring.
COMPLIANCE
No compliance time is given.
EFFECTIVITY
All 767 airplanes line positions 1 -579, 581-589, 591,
592.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the
configuration changes given in this service bulletin.
MANPOWER
Airplanes
Total
Man-hours
Elapsed Time
(Hours)
Groups 1-3 12 10.5
Group 4 9 7.5
Group 5 11 9.5
Groups 6-8 13 11.5
Groups 9-10 9.5 8
MATERIAL INFORMATION
Boeing Supplied Kits
Refer to Paragraph I.H., Material - Price and
Availability.
BOEING COMMERCIAL AIRPLANE GROUP P.O. BOX 3707 SEATTLE, WASHINGTON 98124-2207 Summary Page 1 of 2

### Page 2

BOEING SERVICE BULLETIN 767-31-0073
A WIRING MODIFICATION
ON GROUPS 1−3, 5 AND
ON GROUPS 1−3,5
P37 PANEL
MODIFICATION IN
MAKE A WIRING
AND 6−8 AIRPLANES
IN E8 RACK
MAKE WIRING MODIFICATION
INSTALL EICAS ENABLE BYPASS SWITCH
ON GROUPS 1−3 AND 6−8 AIRPLANES
TUBE ASSEMBLY
PRESSURE SWITCH AND
INSTALL ALTITUDE
266.5
STA
6−8 AIRPLANES MAKE
FWD
MAIN EQUIPMENT CENTER
FWD
UP
INBD
R41393
Oct 12/95
Summary Page 2 of 2

### Page 3

Commercial
Airplane
Group
767
Service Bulletin
Number: 767-31-0073
Date: October 12, 1995
ATA System: 3141
SUBJECT: INDICATING/RECORDING SYSTEMS - CENTRAL COMPUTERS - INFLIGHT EICAS
MAINTENANCE DATA SELECTION SYSTEM INSTALLATION
I. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-24T001, Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR B12654 for data about this change.
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AEROFLOT (ARO)
1 VN561-VN562
AEROMEXICO (AMX)
1 VN556-VN557
AIR ALGERIE (ALG)
7 VK131-VK133
AIR CANADA (ACN)
4 VN931
6 VA701-VA712 VB001-VB002 VB201-VB202
7 VA713-VA719
AIR CHINA GROUP (BEJ)
6 VE064-VE065
7 VE083-VE086 VK161-VK164
AIR EUROPE ITALY SPA (EIY)
1 VN551
4 VN682 VN811-VN812 VN972
AIR FRANCE (AFA)
1 VF101-VF102 VN631 VN632 VN633-VN638
2 VF101
AIR MAURITIUS LTD. (MAU)
3 VF001-VF002
Oct 12/95 767-31-0073
Page 1 of 50

### Page 4

BOEING SERVICE BULLETIN 767-31-0073
AIR NEW ZEALAND, LTD. (ANZ)
1 VN651-VN656
6 VB323-VB324 VE101-VE103
AIR PACIFIC (APC)
1 VN676
AIR SEYCHELLES LTD. (ASY)
3 VF051
AIR UK (LEISURE) (UKL)
5 VN921-VN922
AIR ZIMBABWE (ZMB)
1 VF061-VF062
AIRTOURS INT'L AVIATION (GUERNSEY) LTD. (GUE)
1 VN951-VN952
ALITALIA (ALI)
1 VN422-VN423 VN425
ALL NIPPON AIRWAYS CO. LTD. (ANA)
1 VN191-VN196
6 VB101-VB121
7 VB122-VB125 VK081-VK112
AMERICAN AIRLINES, INC. (AAL)
1 VN001-VN041
6 VA501-VA515
7 VA516-VA530
ANSETT AUSTRALIA (ANS)
6 VB051-VB055 VB322
ANSETT WORLDWIDE AVIATION SERVICES (AWW)
1 VF092 VN385
ASIANA AIRLINES (AAR)
1 VN546-VN547
3 VL703 VN751-VN753
7 VK141-VK144
AVIANCA (AVI)
4 VN152
7 VE171-VE172
BIRGENAIR (BIR)
6 VE041
BOEING (TBC)
6 VA001
BOULLIOUN AVIATION SERVICES (BOU)
1 VN424
Oct 12/95 767-31-0073
2

### Page 5

BOEING SERVICE BULLETIN 767-31-0073
BRITANNIA AIRWAYS, INC. (BRI)
6 VB321
7 VB325-VB332
BRITISH AIRWAYS (BAB)
1 VN111-VN127 VN130-VN135
CANADIAN AIRLINES INTERNATIONAL LTD. (CDI)
1 VN051-VN061
CHINA SOUTHERN AIR GROUP (GUN)
1 VN062-VN064
3 VL701-VL702
4 VN813
CONDOR/CARGO TECHNIK GMBH (CDF)
4 VN683-VN691
DELTA AIR LINES, INC. (DAL)
4 VN251-VN266
9 VA301-VA315 VK031-VK056
10 VK032-VK056
EGYPTAIR (EGP)
1 VN211-VN212
6 VE021-VE023
EL AL ISRAEL AIRLINES, LTD. (ELA)
6 VB281-VB284
ETHIOPIAN AIRLINES, CORP. (ETH)
6 VE001-VE002
7 VE003
EVA AIRWAYS CORPORATION (EVA)
1 VN791-VN792
4 VN471-VN472 VN731
7 VB441-VB444
GE CAPITAL AVIATION SERVICES, INC. (GEH)
4 VL751-VL753
GPA GROUP LTD. (GUI)
1 VF161
GULF AIR (GUL)
1 VL003-VL006 VN301-VN314
ITOCHU CORPORATION (CIT)
4 VF181-VF182
JAPAN AIRLINES (JAL)
6 VB371-VB373 VK001
7 VK002-VK015 VK021-VK022
KLM ROYAL DUTCH AIRLINES (KLM)
4 VL891-VL893
Oct 12/95 767-31-0073
3

### Page 6

BOEING SERVICE BULLETIN 767-31-0073
LAN-CHILE S.A. (LAN)
1 VF091 VF093 VN376 VN531 VN971
8 VE118
LAUDA AIR LUFTFAHRT AG (LAL)
1 VL011 VN242-VN243 VN388
LAUDA AIR S.P.A. (LDI)
4 VN671
LINHAS AEREAS DE MOZAMBIQUE (LAM)
1 VF162
LOT POLISH AIRLINES (LOT)
1 VN291-VN292
3 VF041-VF042
LUFTTRANSPORT SUED AG AND CO. (LTS)
1 VN171-VN173 VN381
MALEV HUNGARIAN AIRLINES (HGA)
3 VF171-VF172
MARTINAIR HOLLAND N.V. (MTH)
4 VN221-VN224 VN672
QANTAS AIRWAYS, LTD. (QAN)
1 VN081-VN095
6 VE061-VE063 VE066-VE068
7 VE069
ROYAL BRUNEI (RBA)
1 VN371-VN372 VN382-VN384 VN386-VN387
SCANDINAVIAN AIRLINES SYSTEM (SAS)
4 VF071 VN151 VN153-VN158 VN163-VN168
SHANGHAI AIRLINES, P.R.C. (SHA)
7 VK171
SOBELAIR (SBL)
1 VN421
SPANAIR (SPP)
1 VN541-VN542
TACA INTERNATIONAL AIRLINES, INC. (TAC)
4 VN732
8 VE116
THE AMEDEO CORPORATION (BRX)
3 VF180
TRANS WORLD AIRLINES, INC. (TWA)
1 VN536-VN537
4 VN681
6 VB301-VB302
9 VA801-VA810
Oct 12/95 767-31-0073
4

### Page 7

BOEING SERVICE BULLETIN 767-31-0073
TRANSBRASIL AIRLINES INC. (TBL)
1 VL001-VL002 VN532
4 VF072
6 VB251-VB253 VE104
8 VE117
UNITED AIR LINES, INC. (UAL)
1 VN491-VN513
6 VA002-VA020
USAIR, INC. (USA)
8 VE141-VE152
VARIG AIRLINES (VAR)
1 VN231-VN234
8 VE121-VE126
IDENTIFICATION BY VARIABLE NUMBER
GROUP 1
VF061-VF062 VF091-VF093 VF101-VF102 VF161-VF162 VL001-VL006 VL011
VN001-VN041 VN051-VN064 VN081-VN095 VN111-VN127 VN130-VN135 VN171-VN173
VN191-VN196 VN211-VN212 VN231-VN234 VN241-VN243 VN291-VN292 VN301-VN314
VN371-VN372 VN376 VN381-VN388 VN421-VN425 VN491-VN513 VN531-VN532
VN536-VN537 VN541-VN542 VN546-VN547 VN551 VN556-VN557 VN561-VN562
VN631-VN638 VN651-VN656 VN676 VN791-VN792 VN951-VN952 VN971
GROUP 2
VF101
GROUP 3
VF001-VF002 VF041-VF042 VF051 VF171-VF172 VF180 VL701-VL703
VN751-VN753
GROUP 4
VF071-VF072 VF181-VF182 VL751-VL753 VL891-VL893 VN151-VN158 VN163-VN168
VN221-VN224 VN251-VN266 VN471-VN472 VN671-VN672 VN681-VN691 VN731-VN732
VN811-VN813 VN931 VN972
GROUP 5
VN921-VN922
GROUP 6
VA001-VA020 VA501-VA515 VA701-VA712 VB001-VB002 VB051-VB055 VB101-VB121
VB201-VB202 VB251-VB253 VB281-VB284 VB301-VB302 VB321-VB324 VB371-VB373
VE001-VE002 VE021-VE023 VE041-VE043 VE061-VE068 VE101-VE104 VK001
GROUP 7
VA516-VA530 VA713-VA719 VB122-VB125 VB325-VB332 VB441-VB444 VE003
VE069 VE083-VE086 VE171-VE172 VK002-VK015 VK021-VK022 VK081-VK112
VK131-VK133 VK141-VK144 VK161-VK164 VK171
GROUP 8
VB401 VE116-VE118 VE121-VE126 VE141-VE152
GROUP 9
VA301-VA315 VA801-VA810 VK031-VK056
Oct 12/95 767-31-0073
5

### Page 8

BOEING SERVICE BULLETIN 767-31-0073
GROUP 10
VK032-VK056
2. Spares
None
Oct 12/95 767-31-0073
6

### Page 9

BOEING SERVICE BULLETIN 767-31-0073
B. Reason
The change given in this service bulletin will let the EICAS maintenance messages to be shown when
the airplane is at or above 10,000 feet.
Currently EICAS maintenance messages can be shown only when the airplane is on the ground.
This modification will let the EICAS maintenance messages be selected for display when the
airplane is at or above 10,000 feet.
As part of a service bulletin validation program, this change was completed on airplane VL754 before
the release of the service bulletin. Airplane VL754 has the configuration of a Group 4 airplane.
C. Description
- On Groups 1-3 and 6-8 airplanes: EICAS enable bypass switch is installed on E8 E rack.
- Altitude pressure switch and pressure tubing are installed on E8 rack.
- A wiring modification is made to the EICAS maintenance system.
The airplane effectivity is divided in 10 groups because of differences in EICAS rack, EICAS enable
bypass switch, pressure tubing and wiring configurations.
The changes in this service bulletin will not change the Engine Indication and Crew Alerting System
(EICAS) other than enabling in flight display of maintenance pages.
D. Compliance
No compliance time is given.
E. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this service bulletin comply with the applicable Federal Aviation Regulations (FAR) and
are FAA approved. This service bulletin and the FAA approval were based on the airplane in its
original Boeing delivery configuration or as modified by other FAA approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also
affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory
agency approval before incorporating this service bulletin.
F. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service
bulletin.
Oct 12/95 767-31-0073
7

### Page 10

BOEING SERVICE BULLETIN 767-31-0073
G. Manpower
The data below shows an estimate of the man-hours necessary to do this modification for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator man-hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
- Time to adjust to the workplace
- Time to schedule the work
- Time to examine the work
- Time to cure the materials
- Time to make the parts
- Time to find the tools.
Airplanes Task Number of Persons Man-Hours Elapsed Time (Hours)
Groups 1-3
Open Access 1 0.5 0.5
Change 1 8 8
Close Access 1 0.5 0.5
Test 2 3 1.5
TOTAL FOR EACH AIRPLANE 12 10.5
Groups 4
Change 1 6 6
Test 2 3 1.5
TOTAL FOR EACH AIRPLANE 9 7.5
Group 5
Open Access 1 0.5 0.5
Change 1 7 7
Close Access 1 0.5 0.5
Test 2 3 1.5
TOTAL FOR EACH AIRPLANE 11 9.5
Groups 6-8
Open Access 1 0.5 0.5
Change 1 9 9
Close Access 1 0.5 0.5
Test 2 3 1.5
TOTAL FOR EACH AIRPLANE 13 11.5
Groups 9-10
Change 1 6.5 6.5
Test 2 3 1.5
TOTAL FOR EACH AIRPLANE 9.5 8
Oct 12/95 767-31-0073
8

### Page 11

BOEING SERVICE BULLETIN 767-31-0073
H. Material - Price and Availability
Boeing can supply the kits shown in Paragraph II.A., Parts Necessary For Each Airplane, as shown
below. Kit availability is shown in the Reorder Lead Time (ROLT). ROLT is calculated from the date
Boeing gets the purchase order.
Kit Number Name
ROLT
(weeks)
Unit Price thru
Jun 12/96
015T1461-1 Top Kit (Groups 1 and 2 airplanes) 38 $ 2,799.00
015T1461-2 Top Kit (Group 3 airplanes) 38 $ 2,718.00
015T1461-3 Top Kit (Group 4 airplanes) 38 $ 2,366.00
015T1461-4 Top Kit (Group 5 airplanes) 38 $ 2,523.00
015T1461-5 Top Kit (Groups 6 and 7 airplanes) 28 $3,535.00
015T1461-6 Top Kit (Group 8 airplanes) 28 $ 3,453.00
015T1461-7 Top Kit (Groups 9 and 10 airplanes) 28 $ 3,101.00
The kits are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. After the Price date, new price data is applicable. Prices are in United States
Dollars. Terms: Net 30 days.
I. Special Tools - Price and Availability
None
J. Weight and Balance
Airplane Change in Weight
(Pounds)
Change in Moment
(Pound-Inches)
767-200 767-300
Groups 1-2 +2.0 +532.0 +290.0
Group 3 +1.8 +478.8 +261.0
Group 4 +1.5 +399.0 +217.5
Group 5 +1.9 - +275.5
Groups 6 and 7 +4.0 +1064.0 +580.0
Group 8 +3.8 +1010.8 -
Groups 9 and 10 +3.5 +931.0 +507.5
Oct 12/95 767-31-0073
9

### Page 12

BOEING SERVICE BULLETIN 767-31-0073
K. References
1. Existing Data:
a. Engineering Change Memo PRR B12654
b. 767 Maintenance Manual (AMM) Subjects 25-52-02, 31-41-02, 34-11-00
c. 767 Structure Repair Manual (SRM) Subject 51-70-16
d. 767 Wiring Diagram 31-41-13
e. Boeing Standard Wiring Practices Manual (BSWPM) 20-10-11, 20-10-12
f. Boeing Standard Overhaul Practices Manual (BSOPM) 20-50-02
2. Data supplied with this service bulletin:
None
L. Publications Changed
Publication Chapter-Section
767 Maintenance Manual 31-41
767 Wiring Diagram Manual 31-41
767 Ramp Maintenance Manual 31-01, 31-31
767 Illustrated Parts Catalog 31-41
M. Electrical Load Data
Not changed
Oct 12/95 767-31-0073
10

### Page 13

BOEING SERVICE BULLETIN 767-31-0073
II. MATERIAL INFORMATION
A. Parts Necessary For Each Airplane
1. Kits:
To get the kits shown below, refer to Paragraph I.H., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph II.A.2., Parts and Materials Supplied by the
Operator, are necessary for each airplane.
015T1461 - TOP KIT, INFLIGHT ACTIVATION OF EICAS MAINTENANCE MESSAGE
SYSTEM
-1 -2 -3 -4 -5 -6
Quantity Part Number Name
- . . . . . 015T1461-1 Top Kit (Groups 1 and 2 airplanes)
. - . . . . 015T1461-2 Top Kit (Group 3 airplanes)
. . - . . . 015T1461-3 Top Kit (Group 4 airplanes)
. . . - . . 015T1461-4 Top Kit (Group 5 airplanes)
- . . . - . 015T1461-5 Top Kit (Groups 6 and 7 airplanes)
. - ...- 015T1461-6 Top Kit (Group 8 airplanes)
1 1 . . 1 1 015T1461-8 Kit, EICAS Maint Enable Bypass Switch
Installation
1 1 1 1 1 1 015T1461-9 (a) Kit, Wire Installation
1 1 1 1 . . 233T0044-1 Kit, EICAS Pressure Switch Installation
. . . . 1 1 233T0044-2 Kit, EICAS Pressure Switch Installation
1 . . 1 1 . 289T0341-2 Wire Kit
. . 1 . . . 289T0341-1 Wire Kit
. 1 . . . 1 289T0341-3 Wire Kit
015T1461 - (CONTINUED)
-7 -8 -9
Quantity Part Number Name
- . . 015T1461-7 Top Kit (Groups 9 and 10 airplanes)
. - . 015T1461-8 Kit, EICAS Maint Enable Bypass
Switch Installation
1 . - 015T1461-9 (a) Kit, Wire Installation
1 . . 233T0044-2 Kit, EICAS Pressure Switch Installation
1 . . 289T0341-1 Wire Kit
. 1 . 284T1038-4 Bracket Assembly
. 1 . 405-112 Switch Guard
. 1 . BAC27TEX2962 Marker
. 1 . BAC27TEX3095 Marker
. 3 . BACN10TL3-4 Nutplate
. 2 . BACR15BB4AD5 Rivet
Oct 12/95 767-31-0073
11

### Page 14

BOEING SERVICE BULLETIN 767-31-0073
(Continued)
015T1461 - (CONTINUED)
-7 -8 -9
Quantity Part Number Name
. 2 . BACR15FT5AD4 Rivet
. 1 . ITL187-3 Switch
. 4 . NAS1398D4-3 Rivet
. . 6 BACC10DK2 Clamp
. . 6 NAS1149D0332J Washer
. . 6 NAS1801-3-7 Screw
. . 1 BACN10GH3-6 Nutplate
. . 1 BACN10TL3-3 Nutplate
. . 5 BACR15BA3AD3 Rivet
. . 1 NAS42DD-6-80 Spacer
. . 1 NAS1801-3-26 Screw
. . 3 BACR15DR3P2 Rivet
. . 3 BACP20BA1 Filler
. . 1 1QM1-3-54A Quick Disconnect
233T0044 - KIT, EICAS PRESSURE SWITCH INSTALLATION
-1 -2
Quantity Part Number Name
- . 233T0044-1 Kit, EICAS Pressure Switch Installation
. - 233T0044-2 (a) Kit, EICAS Pressure Switch Installation
1 . 233T9110-1162 Tube Assembly
. 1 233T9110-1072 Tube Assembly
. 1 233T9110-1073 Tube Assembly
. 1 233T9110-1074 Tube Assembly
. 1 233T9110-1075 Tube Assembly
. 1 233T9110-37 Drain Assembly
1 1 233T9118-105 Bracket Assembly
. 3 287T0012-3 Attach Assembly
. 1 BACC10DK10 Clamp
6 BACC10DK6 Clamp
1 1 BACH30BC06-0110 Hose Assembly
4 4 BACR15FT6AD5 Rivet
. 3 BACS12GU3-12 Screw
. 4 BACS12GU3-40 Screw
1 1 BACT16AY060606W Swivel Tee
1 1 BAC27TFDE534 Marker
. 1 MS21905W6 Tee Assembly
Oct 12/95 767-31-0073
12

### Page 15

BOEING SERVICE BULLETIN 767-31-0073
(Continued)
233T0044 - KIT, EICAS PRESSURE SWITCH INSTALLATION
-1 -2
Quantity Part Number Name
. 11 NAS1149D0332J Washer
. 4 NAS43DD3-45FC Spacer
1 1 1QF2-3-64A Quick Disconnect
1 1 123-2222F Clamp
1 1 6502-10K Pressure Switch
233T9110 - KIT, DRAIN ASSEMBLY
-37
Quantity Part Number Name
- 233T9110-37 Kit, Drain Assembly
1 MS28778-6 O-Ring
1 1QF2-3-64A Quick Disconnect
1 1QM1-3-69A Quick Disconnect
1 50017A43-6-0070 Hose Assembly Drain
287T0012 - KIT, STRINGER ATTACH ASSEMBLY
-3
Quantity Part Number Name
- 287T0012-3 Kit, Stringer Attach Assembly
1 287T0012-1 Support Attachment
2 287T0012-2 Strap
Oct 12/95 767-31-0073
13

### Page 16

BOEING SERVICE BULLETIN 767-31-0073
289T0341 - WIRE KIT
-1 -2 -3 -101 -102 -103
Quantity Part Number Name
- . . . . . 289T0341-1 Subkit, Wire
. - . . . . 289T0341-2 Subkit, Wire
. . - . . . 289T0341-3 Subkit, Wire
. 1 1 - . . 289T0341-101 Kit, Wire (W0192)
. 1 . . - . 289T0341-102 Kit, Wire (W0764)
1 1 1 . . - 289T0341-103 Kit, Wire (W2006)
1 1 1 . . . 289T0341-104 (b) Lacing Tape (white)
1 1 1 . . . 289T0341-105 (c) Lacing Tape (green)
4 4 4 . . . BACS18AR6 Burndy Spacer
. . . 1 . . 289T0341-101W Wire
....1. 289T0341-102W Wire
.....1 289T0341-103W Wire
. . . 3 2 BACC47CN1A Pin Contact
....2 5 BACC47CP1A Socket Contact
. . . 1 . . BACC47ER1 Relay Socket Contact
.....1 BACC45FT10A5S Plug (D20950)
.....1 289T0341-10301 Identification Tape
.....1 BACT12AR202 Lug
.....2 BACT12AR222 Lug
.....3 M39029/11-145 Terminal Block Contact
.....3 BACC47DE7 Terminal Block Contact
.....1 BACM15C3B Terminal Block
(a) The kit has more parts than are necessary for installation. Discard parts that are not used or
keep the parts for spares.
(b) Lacing tape 18DZ-A, white, 20 feet
(c) Lacing tape 18DZ-A, green, 60 feet
2. Parts and Materials Supplied by the Operator:
Quantity Part Number (Specification) Name
2 feet MS20995C20 Lockwire
Oct 12/95 767-31-0073
14

### Page 17

BOEING SERVICE BULLETIN 767-31-0073
B. Parts Necessary to Change Spares
None
C. Special Tools and Equipment
No special tools or equipment are necessary to do the change in this service bulletin. But,
maintenance and overhaul tools in the manuals given in Paragraph I.K., References, can be
necessary. Examine operator tool supply to make sure all necessary tools are available.
D. Existing Parts Accountability
The parts shown below are changed as shown in this service bulletin. Quantity is the number of parts
changed on each airplane.
Existing Part Number RUC Name Quantity New Part Number PNC RC
233T9110-1101 DIS Tube Assembly 1 233T9110-1162 S A
233T9110-1002 or
-1047
DIS Tube Assembly 1 233T9110-1072 S A
RUC Recommended Use Code
DIS - Discard the part.
PNC Part Number Code
S - This is the part number for the new equivalent or replacement part.
- To get a new part, use this part number in your order.
RC Replacement Code
A - Do not use the existing part to replace the new or changed part.
Oct 12/95 767-31-0073
15

### Page 18

BOEING SERVICE BULLETIN 767-31-0073
BLANK PAGE
Oct 12/95 767-31-0073
16

### Page 19

BOEING SERVICE BULLETIN 767-31-0073
III. ACCOMPLISHMENT INSTRUCTIONS
NOTES:
1. The paragraphs identified with a letter give the general work instructions and the necessary tests.
The instructions identified with numbers on the figures give the recommended sequence of steps.
2. Unless shown differently, these dimensions and tolerances are used:
- Linear dimensions are in inches
- Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03
inch
- Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
- Angular tolerance is plus or minus 2 degrees
- Hole dimensions for standard solid rivets are given in 767 Structural Repair Manual Chapter 51
- Torque limits to tighten nuts and bolts are given in 767 Structural Repair Manual Chapter 51.
3. Alternative fasteners are given in 767 Structural Repair Manual Chapter 51.
4. Refer to the Boeing Standard Wiring Practices Manual 20-10-11 and 20-10-12 for the wire
installation procedures.
5. Obey all of the warnings and cautions given in the specified manual sections.
A. On Group 1-3, 5 and 6-8 airplanes, remove ceiling panel aft of the Electrical/Electronic shelf as
specified in the 767 Maintenance Manual 25-52-02.
B. Remove the left and right EICAS computers as specified in the 767 Maintenance Manual 31-41-02.
C. On Groups 1-3 and 6-8 airplanes: install the EICAS maintenance enable bypass switch as shown in
Figure 1.
D. Install the altitude pressure switch as shown in Figure 2.
E. Install the altitude pressure tubing as follows:
- On Groups 1-5 airplanes: use Figure 3.
- On Groups 6-10 airplanes: use Figure 4.
F. Make a wiring modification and wiring installation as follows:
- On Groups 2 and 6 airplanes: use Figure 5 and 7.
- On Groups 1, 3, 5, 7 and 8 airplanes: use Figure 5 and 8.
- On Group 9 airplanes: use Figure 6 and 7.
- On Groups 4 and 10 airplanes: use Figure 6 and 8.
G. Install the left and right EICAS computers as specified in the 767 Maintenance Manual 31-41-02.
H. On Group 1-3, 5 and 6-8 airplanes, install ceiling panel aft of the Electrical/Electronic shelf as
specified in the 767 Maintenance Manual 25-52-02.
Oct 12/95 767-31-0073
17

### Page 20

BOEING SERVICE BULLETIN 767-31-0073
I. Do the applicable steps:
- On Groups 1 - 5 airplanes: flush the auxiliary static system No. 2 and do leak test of the auxiliary
static system No. 2 as specified in the 767 Maintenance Manual 34-11-00.
- On Groups 6 - 10 airplanes: flush the auxiliary static system No. 1 and do leak test of the auxiliary
static system No. 1 as specified in the 767 Maintenance Manual 34-11-00.
J. Do operational test of the EICAS maintenance enable system as follows:
1. Open these circuit breakers in P11 panel.
Circuit Breaker No. Name Location
C1170 LDG GR POS AIR/GND SYS 2 U23 or U24
C1175 LDG GR POS AIR/GND SYS 1 C30
C1182 AIR/GND SYS 1 U15
C1575 (if installed) LDG GR POS AIR/GND SYS 2 ALT E19, C21, C27, or C29
2. Push the STATUS switch on P9 EICAS Display Select Panel.
3. Push the TEST switch on EICAS Maintenance Panel located in the P61 Right Side Panel.
4. Make sure that there is no change in the display.
5. Make sure that Maint Enable Bypass switch S612 on E8 EICAS rack is in the NORMAL position.
6. Disconnect connector D20950 from the Altitude Pressure switch S921 on E8 EICAS rack.
7. Install a jumper wire between pins 1 and 2 of connector D20950.
8. Push the CONF/MCDP switch on EICAS Maintenance Panel.
9. Make sure that the CONF/MCDP page shows on the EICAS Lower Display Unit.
10. Remove the jumper wire from connector D20950.
11. Connect connector D20950 to the Altitude Pressure switch S921.
12. Push the STATUS switch on P9 EICAS Display Select Panel.
13. Set Maint Enable Bypass switch S612 to the BYPASS position.
Oct 12/95 767-31-0073
18

### Page 21

BOEING SERVICE BULLETIN 767-31-0073
14. Push the CONF/MCDP switch on EICAS Maintenance Panel.
15. Make sure that the CONF/MCDP page shows on the EICAS Lower Display Unit.
16. Set Maint Enable Bypass switch S612 to the NORMAL position.
17. Push the STATUS switch on P9 EICAS Display Select Panel.
18. Push the CONF/MCDP switch on EICAS Maintenance Panel.
19. Make sure that there is no change in the display.
20. Close circuit breakers C1170, C1175, C1182, C1575 (if installed).
21. Push the CONF/MCDP switch on EICAS Maintenance Panel.
22. Make sure that the CONF/MCDP page shows on the EICAS Lower Display Unit.
K. Put the airplane back into the serviceable configuration.
Oct 12/95 767-31-0073
19

### Page 22

BOEING SERVICE BULLETIN 767-31-0073
FIGURE TABLE OF CONTENTS
Title Page
FIGURE 1. EICAS MAINTENANCE ENABLE BYPASS SWITCH INSTALLATION -
GROUPS 1-3 AND 6-8 AIRPLANES . . ............................. 2 1
FIGURE 2. ALTITUDE PRESSURE SWITCH INSTALLATION - ALL AIRPLANES ..... 2 4
FIGURE 3. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 1-5
AIRPLANES . . . ............................................... 2 9
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10
AIRPLANES . . . ............................................... 3 2
FIGURE 5. WIRING MODIFICATION - GROUPS 1-3, 5 AND 6-8 AIRPLANES . . ..... 3 8
FIGURE 6. WIRING MODIFICATION - GROUPS 4, 9 AND 10 AIRPLANES .......... 4 1
FIGURE 7. WIRING INSTALLATION - GROUPS 2, 6, AND 9 AIRPLANES .......... 4 3
FIGURE 8. WIRING INSTALLATION - GROUPS 1, 3-5, 7, 8 AND 10 AIRPLANES .... 4 7
Oct 12/95 767-31-0073
20

### Page 23

BOEING SERVICE BULLETIN 767-31-0073
266.5
STA
FWD
RACK
E8 EICAS
MAIN EQUIPMENT CENTER
B
BA
A FWD
UP
INBD
R41408
FIGURE 1. EICAS MAINTENANCE ENABLE BYPASS SWITCH INSTALLATION - GROUPS 1-3 AND 6-8
AIRPLANES
Oct 12/95 SHEET 1 OF 3 767-31-0073
21

### Page 24

BOEING SERVICE BULLETIN 767-31-0073
7
9
3
3
8
72
53
4
16
S612
(4 LOCATIONS)
UP
FWD
VIEW C−C
266.5
STA
(2 LOCATIONS)
0.60
5.307.10
UP
FWD
VIEW B−B
STA
266.5
VIEW A−A
UP
INBD
LBL
53.07
0.32
4.00
3.30
0.80
BYPASS
NORMAL
EICAS MAINT
ENABLE BYPASS
C
C
R41472
-
FIGURE 1. EICAS MAINTENANCE ENABLE BYPASS SWITCH INSTALLATION - GROUPS 1-3 AND 6-8
AIRPLANES
Oct 12/95 SHEET 2 OF 3 767-31-0073
22

### Page 25

BOEING SERVICE BULLETIN 767-31-0073
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Install Bracket 284T1038-4 1 -
2 Install Rivet BACR15FT5AD4 2 -
3 Install Switch ITL187-3 1 -
Switch Guard 405-112 1
4 Install Lockwire MS20995C20 - With switch lever in the OFF
position. Use double twist
method as specified in the
BSOPM 20-50-02
5 Install Marker BAC27TEX3095 1 -
6 Install Marker BAC27TEX2962 1 -
7 Install Nutplate BACN10TL3-4 3 -
8 Install Rivet BACR15BB4AD5 2 -
9 Install Rivet NAS1398D4-3 4 -
FIGURE 1. EICAS MAINTENANCE ENABLE BYPASS SWITCH INSTALLATION - GROUPS 1-3 AND 6-8
AIRPLANES
Oct 12/95 SHEET 3 OF 3 767-31-0073
23

### Page 26

BOEING SERVICE BULLETIN 767-31-0073
SEE DETAIL II
SEE DETAIL I
FWD
STA
266.5
MAIN EQUIPMENT CENTER
INBD
UP
FWD
R41478
FIGURE 2. ALTITUDE PRESSURE SWITCH INSTALLATION - ALL AIRPLANES
Oct 12/95 SHEET 1 OF 5 767-31-0073
24

### Page 27

BOEING SERVICE BULLETIN 767-31-0073
4
266.5
STA
DETAIL I
A
A
FWD
UP
INBD
R41506
FIGURE 2. ALTITUDE PRESSURE SWITCH INSTALLATION - ALL AIRPLANES
Oct 12/95 SHEET 2 OF 5 767-31-0073
25

### Page 28

BOEING SERVICE BULLETIN 767-31-0073
2
1
3
0.58
3.42 (4 LOCATIONS)
VIEW A−A
S921
PRESSURE SW
UP
FWD
R55431
FIGURE 2. ALTITUDE PRESSURE SWITCH INSTALLATION - ALL AIRPLANES
Oct 12/95 SHEET 3 OF 5 767-31-0073
26

### Page 29

BOEING SERVICE BULLETIN 767-31-0073
1.00
5
7
6
8
FWD
UP
VIEW B−B
DETAIL II
6.00 0.26
(2 LOCATIONS)
(2 LOCATIONS)
FWD
UP
B
B
R41543
FIGURE 2. ALTITUDE PRESSURE SWITCH INSTALLATION - ALL AIRPLANES
Oct 12/95 SHEET 4 OF 5 767-31-0073
27

### Page 30

BOEING SERVICE BULLETIN 767-31-0073
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Install Bracket 233T9118-105 1 -
2 Install Rivet BACR15FT6AD5 4 -
3 Install Marker BAC27TFDE534 1 -
4 Install Pressure Switch 6502-10K 1 -
Clamp 123-2222F 1
5 Install Nutplate BACN10GH3-6 1 -
6 Install Nutplate BACN10TL3-3 1 -
7 Drill Hole - - -
Do 100 Degrees
Countersink
- - On the other side (inboard side).
Refer to 767 SRM 51-70-16.
Install Rivet BACR15BA3AD3 2 Rivet head is installed on the
other side.
8 Install Rivet BACR15DR3P2 2 Get rivet from kit 015T1461-9.
FIGURE 2. ALTITUDE PRESSURE SWITCH INSTALLATION - ALL AIRPLANES
Oct 12/95 SHEET 5 OF 5 767-31-0073
28

### Page 31

BOEING SERVICE BULLETIN 767-31-0073
SEE DETAIL I
FWD
STA
266.5
MAIN EQUIPMENT CENTER
INBD
UP
FWD
R41626
FIGURE 3. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 1-5 AIRPLANES
Oct 12/95 SHEET 1 OF 3 767-31-0073
29

### Page 32

BOEING SERVICE BULLETIN 767-31-0073
71
266.5
STA
6
5
3
2 4
STRINGER 27L
STRINGER 26L
DRAIN
AUXILIARY STATIC NO.2
DETAIL I
FWD
UP
INBD
R41711
FIGURE 3. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 1-5 AIRPLANES
Oct 12/95 SHEET 2 OF 3 767-31-0073
30

### Page 33

BOEING SERVICE BULLETIN 767-31-0073
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Remove /
Keep
Screw - - -
Clamp - -
2 Remove Tube Assembly 233T9110-1101 1 -
3 Install Tee BACT16AY060606W 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
4 Install Tube Assembly 233T9110-1162 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
5 Install Hose Assembly BACH30BC06-0110 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
6 Install Quick Disconnect 1QF2-3-64A 1 -
1QM1-3-54A 1 This quick disconnect should be
installed to the pressure switch.
Get the quick disconnect from kit
015T1461-9.
7 Install Clamp (kept) - - -
Screw (kept) - -
FIGURE 3. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 1-5 AIRPLANES
Oct 12/95 SHEET 3 OF 3 767-31-0073
31

### Page 34

BOEING SERVICE BULLETIN 767-31-0073
DETAILS I AND II
SEE
212.5
228.5
246
STA
STA
266.5
STA
STA
FWD
MAIN EQUIPMENT CENTER
FWD
UP
INBD
R41750
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10 AIRPLANES
Oct 12/95 SHEET 1 OF 6 767-31-0073
32

### Page 35

BOEING SERVICE BULLETIN 767-31-0073
1 4
6
7
8
1
1
3
5
9 12
10
2
11
S−26L
S−27L
S−24L
DETAIL I
STA
266.5
STA
246
(2 LOCATIONS)
SEE DETAIL IV DETAIL II
CONTINUED ON
SEE DETAIL III
FWD
UP
INBD
R42185
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10 AIRPLANES
Oct 12/95 SHEET 2 OF 6 767-31-0073
33

### Page 36

BOEING SERVICE BULLETIN 767-31-0073
9 12
15
1713
16
14 18
212.5
STA
228.5
STA
(2 LOCATIONS)
SEE DETAIL IV
FROM
DETAIL I
CONTINUED
NO.1 DRAIN
AUXILIARY STATIC
DETAIL II
FWD
UP
INBD
R42209
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10 AIRPLANES
Oct 12/95 SHEET 3 OF 6 767-31-0073
34

### Page 37

BOEING SERVICE BULLETIN 767-31-0073
DETAIL III
DRAIN
HOSE ASSEMBLY
O−RING
DISCONNECT
QUICK
TUBE ASSEMBLY
EXISTING
CLAMP
SPACER
SCREW
DETAIL IV
EXISTING
SPACER
WASHER CLAMP
R42242
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10 AIRPLANES
Oct 12/95 SHEET 4 OF 6 767-31-0073
35

### Page 38

BOEING SERVICE BULLETIN 767-31-0073
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Remove /
Keep
Screw - - Do not remove clamp from tube
assembly.Washer - -
2 Install Hose Drain
Assembly
50017A43-6-0070 1 -
O-Ring MS28778-6 1
Quick Disconnect 1QF2-3-64A 1
1QM1-3-69A 1
3 Install Tube Assembly 233T9110-1075 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
4 Install Clamp BACC10DK10 1 Install stringer attach assembly
287T0012-3 if necessary.Use Screw (kept) - -
Washer (kept) - -
5 Install Clamp BACC10DK6 1 -
Use Screw (kept) - -
Washer (kept) - -
6 Install Tee Assembly MS21905W6 1 -
7 Install Hose Assembly BACH30BC06-0110 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
8 Install Quick Disconnect 1QF2-3-64A 1 -
1QM1-3-54A This quick disconnect should be
installed to the pressure switch.
Get the quick disconnect from kit
015T1461-9.
9 Remove Screw - - Keep spacer. Do not remove
clamp from tube assembly.Spacer - -
10 Install Tube Assembly 233T9110-1074 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
11 Install Clamp BACC10DK6 1 -
Use Screw (kept) - -
Washer (kept) - -
12 Install Clamp BACC10DK6 3 -
Use Screw BACS12GU3-40 3
Washer NAS1149D0332J 3
Spacer NAS43DD3-45FC 3
Spacer (kept) - -
13 Install Tube Assembly 233T9110-1073 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10 AIRPLANES
Oct 12/95 SHEET 5 OF 6 767-31-0073
36

### Page 39

BOEING SERVICE BULLETIN 767-31-0073
(Continued)
STEP TASK NAME PART NUMBER QTY NOTES
14 Remove /
Keep
Screw - -
Clamp - - From tube assembly
233T9110-1002 or -1047. Do not
remove clamp from other tube
assembly.
15 Remove Tube Assembly 233T9110-1002 or
-1047
1 -
16 Install Tube Assembly 233T9110-1072 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
17 Install Tee Assembly BACT16AY060606W 1 Tighten fittings with torque range
of 165 to 175 inch-pounds.
18 Install Clamp (kept) - - -
Use Screw (kept) - - -
FIGURE 4. ALTITUDE PRESSURE TUBING INSTALLATION - GROUPS 6-10 AIRPLANES
Oct 12/95 SHEET 6 OF 6 767-31-0073
37

### Page 40

BOEING SERVICE BULLETIN 767-31-0073
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
1 2
11
12
10
10
32
7
3
94
8
5
6
5
7
7
3 2
(3 LOCATIONS)
(3 LOCATIONS)
SWITCH
BYPASS
ENABLE
MAINT
EICAS
S612
11
9
10
K202 SYS 2
AIR/GND RLY
D3688
012−24
01J−24
01J−24
NC
27 W768
J D5316P
POS 34
P37 RIGHT MISCELLANEOUS ELECTRICAL
W764−077−24
W764−076−24
AE0218
D5328P
POS 36
J
AE0221
8
9
J D6256P
POS 5
YC45
TB239
008−24 014−24
1
012−242
3N C10K
FT 5
011−20
013−20
GD171−DC
D20950
S921 ALTITUDE
PRESSURE SWITCH
2
NORMAL
BYPASS
009−24
020−20
GD171−S
GD171−DC
3
1
W192
W2006
E8 EICAS RACK
R41287
REFERENCE: 767 WIRING DIAGRAM 31-41-13
FIGURE 5. WIRING MODIFICATION - GROUPS 1-3, 5 AND 6-8 AIRPLANES
Oct 12/95 SHEET 1 OF 3 767-31-0073
38

### Page 41

BOEING SERVICE BULLETIN 767-31-0073
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 Relay Socket
Contact
BACC47ER1 1 -
2 Pin Contact BACC47CN1A 4 -
3 Socket Contact BACC47CP1A 7 -
4 Terminal Block
Contact
M39029/11-145 3 -
5 Lug BACT12AR222 2 -
6 Lug BACT12AR202 1 -
7 Terminal Block
Contact
BACC47DE7 3 -
8 Plug BACC45FT10A5S 1
Cable Clamp - - The cable clamp is included with the plug.
Identification Tape 289T0341-10301 1 -
9 Terminal Block BACM15C3B 1 Terminal block may already install on some
airplanes.
Spacer BACS18AR6 4 As required to obtain position 45 and 46 on
some airplanes.
10 - - - Existing spare wires for airplanes
VB401, VE101-VE104, VE116-VE118,
VE121-VE126, VE141-VE152,
VF001-VF002, VF041-VF042, VF051,
VF171-VF172, VF180, VL701-VL703,
VN751-VN753.
11 - - - See Pin Data Table for pin number.
12 - - - See Pin Data Table for pin number.
FIGURE 5. WIRING MODIFICATION - GROUPS 1-3, 5 AND 6-8 AIRPLANES
Oct 12/95 SHEET 2 OF 3 767-31-0073
39

### Page 42

BOEING SERVICE BULLETIN 767-31-0073
PIN DATA TABLE
Airplanes Pin Number
for
Flag note 11
Pin Number
for
Flag note 12
Group 1: VF091-VF093, VF101-VF102, VF161-VF162,
VN001-VN041, VN171-VN173, VN211-VN212,
VN242-VN243, VN291-VN292, VN301-VN314,
VN371-VN372, VN376, VN381-VN388, VN491-VN513,
VN531-VN532, VN536-VN537, VN541-VN542, VN551,
VN556-VN557, VN561-VN562, VN676, VN971
VL001-VL006, VL011
8 9
Group 7: VE171-VE172, VK161-VK164, VK171
Group 7 VE083-VE086 15 26
Group 1: VF061-VF062, VN051-VN064, VN081-VN095,
VN191-VN196, VN231-VN234, VN421-VN425,
VN546-VN547, VN631-VN638, VN651-VN656,
VN791-VN792, VN951-VN952
15 16
Group 3: VF171-VF172, VF180, VL701-VL703, VN751-VN753
Group 5: VN921-VN922
Group 7 VB325-VB332, VB441-VB444, VK012-VK015,
VK081-VK112, VK131-VK133, VK141-VK144
Group 3: VF001-VF002, VF041-VF042, VF051 15 19
Group 6: VA001-VA020, VA501-VA515, VA701-VA712,
VB001-VB002, VB051-VB055, VB101-VB121,
VB201-VB202, VB251-VB253, VB281-VB284,
VB301-VB302, VB321-VB324, VB371-VB373,
VE001-VE002, VE021-VE023, VE041-VE043,
VE061-VE068, VE101-VE104, VK001
Group 7: VA516-VA530, VA713-VA719, VB122-VB125, VE003,
VE069, VK001-VK011, VK021-VK022
Group 8: VB401, VE116-VE118, VE121-VE126, VE141-VE152
Group 1: VN111-VN127, VN130-VN135 47 48
FIGURE 5. WIRING MODIFICATION - GROUPS 1-3, 5 AND 6-8 AIRPLANES
Oct 12/95 SHEET 3 OF 3 767-31-0073
40

### Page 43

BOEING SERVICE BULLETIN 767-31-0073
DELETED WIRE OR FORMER ROUTING
EXISTING WIRE
ADDED WIRE OR NEW ROUTING
1
(3 LOCATIONS)
(3 LOCATIONS)
2
5
3 4
1
2
GD171−DC
W764
J
POS 5
D6256P
AE0221
8008−24
E8 EICAS RACK
S612
EICAS
MAINT
ENABLE
BYPASS
SWITCH
BYPASS
NORMAL
009−24
1
3
020−20
2
9
TB239
W2006
GD171−S
PRESSURE SWITCH
S921 ALTITUDE
D20950
GD171−DC
013−20
011−20
5FT
10K NC3
2 012−24
1
014−24YC45
R41288
REFERENCE: 767 WIRING DIAGRAM 31-41-13
FIGURE 6. WIRING MODIFICATION - GROUPS 4, 9 AND 10 AIRPLANES
Oct 12/95 SHEET 1 OF 2 767-31-0073
41

### Page 44

BOEING SERVICE BULLETIN 767-31-0073
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 Socket Contact BACC47CP1A 4 -
2 Terminal Block
Contact
BACC47DE7 2 -
3 Terminal Block
Contact
M39029/11-145 3 -
4 Terminal Block BACM15C3B 1 Terminal block may already install on some
airplanes.
Spacer BACS18AR6 4 As required to obtain position 45 and 46 on
some airplanes.
5 Plug BACC45FT10A5S 1 -
Cable Clamp - - The cable clamp is included with the plug.
Identification Tape 289T0341-10301 1 -
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
989752
FIGURE 6. WIRING MODIFICATION - GROUPS 4, 9 AND 10 AIRPLANES
Oct 12/95 SHEET 2 OF 2 767-31-0073
42

### Page 45

BOEING SERVICE BULLETIN 767-31-0073
6
FWD
SEE DETAIL I AND II
E8 RACK
P37 PANEL
W764
MAIN EQUIPMENT CENTER
R42264
FIGURE 7. WIRING INSTALLATION - GROUPS 2, 6, AND 9 AIRPLANES
Oct 12/95 SHEET 1 OF 4 767-31-0073
43

### Page 46

BOEING SERVICE BULLETIN 767-31-0073
1 2
2
1
2
FWD
UP
TB239
EICAS MAINT
ENABLE BYPASS
SWITCH
CONTINUED
TO DETAIL II
GROUND BLOCK
GD171
W2006
W2006
TERMINAL BLOCK
DETAIL I
(E8 RACK)
CONNECTOR
D6256J
AE0221
R42420
FIGURE 7. WIRING INSTALLATION - GROUPS 2, 6, AND 9 AIRPLANES
Oct 12/95 SHEET 2 OF 4 767-31-0073
44

### Page 47

BOEING SERVICE BULLETIN 767-31-0073
5
3
4
DETAIL II
UP
FWD
DETAIL I
CONTINUED FROM
W2006
R42442
FIGURE 7. WIRING INSTALLATION - GROUPS 2, 6, AND 9 AIRPLANES
Oct 12/95 SHEET 3 OF 4 767-31-0073
45

### Page 48

BOEING SERVICE BULLETIN 767-31-0073
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Route Wire - - From EICAS enable
switch S612 to
terminal block
TB139, ground block
GD171, and
connector D6256J.
New wires should be
routed with white
color tie bundle.
On Groups 2
and 6 airplanes
only.
Use Lacing Tape 289T0341-104 -
2 Install Clamp BACC10DK2 3 -
Use Screw NAS1801-3-7 3 -
Washer NAS1149D0332J 3
3 Route Wire - - From altitude pressure switch S921 to
ground block GD171 and terminal
block TB139 and from terminal block
TB139 to connector D6256J. New
wires should be routed with white
color tie bundle.
Use Lacing Tape 289T0341-104 -
4 Install Clamp BACC10DK2 1 -
Use Filler BACP20BA1 1 -
Screw NAS1801-3-7 1
Washer NAS1149D0332J 1
5 Install Clamp BACC10DK2 1 -
Use Filler BACP20BA1 1 -
Screw NAS1801-3-26 1
Washer NAS1149D0332J 1
Spacer NAS42DD-6-80 1
6 Route Wire - - From E8 rack to P37 panel with the
existing wire bundle routing. New
wires should be routed with green
color tie bundle.Use Lacing Tape 289T0341-105 -
7 Route Wire - - In P37 panel with
the existing wore
bundle routing.
New wires should
be routed with
green color tie
bundle.
On Groups 2 and
6 airplanes only.
Use Lacing Tape 289T0341-105
FIGURE 7. WIRING INSTALLATION - GROUPS 2, 6, AND 9 AIRPLANES
Oct 12/95 SHEET 4 OF 4 767-31-0073
46

### Page 49

BOEING SERVICE BULLETIN 767-31-0073
6
P37 PANEL
E8 RACK
SEE DETAIL I AND II
FWD
MAIN EQUIPMENT CENTER
R42447
FIGURE 8. WIRING INSTALLATION - GROUPS 1, 3-5, 7, 8 AND 10 AIRPLANES
Oct 12/95 SHEET 1 OF 4 767-31-0073
47

### Page 50

BOEING SERVICE BULLETIN 767-31-0073
FWD
UP
2
1
2
(E8 RACK)
DETAIL I
W2006
SWITCH
ENABLE BYPASS
EICAS MAINT
D6256J
CONNECTOR
GROUND
BLOCK GD171
BLOCK TB239
TERMINAL
TO DETAIL II
CONTINUED
R42615
FIGURE 8. WIRING INSTALLATION - GROUPS 1, 3-5, 7, 8 AND 10 AIRPLANES
Oct 12/95 SHEET 2 OF 4 767-31-0073
48

### Page 51

BOEING SERVICE BULLETIN 767-31-0073
5
3
4
DETAIL I
CONTINUED FROM
DETAIL II
UP
FWD
CONNECTOR
D20950
R42621
FIGURE 8. WIRING INSTALLATION - GROUPS 1, 3-5, 7, 8 AND 10 AIRPLANES
Oct 12/95 SHEET 3 OF 4 767-31-0073
49

### Page 52

BOEING SERVICE BULLETIN 767-31-0073
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME PART NUMBER QTY NOTES
1 Route Wire - - From EICAS enable
switch S612 to terminal
block TB139, ground
block GD171, and
connector D6256J.
New wires should be
routed with white color
tie bundle.
On Groups
1 ,3,5,7
and 8
airplanes
only.
Use Lacing Tape 289T0341-104 -
2 Install Clamp BACC10DK2 3 -
Use Screw NAS1801-3-7 3 -
Washer NAS1149D0332J 3
3 Route Wire - - From altitude pressure switch S921 to
ground block GD171 and terminal
block TB139 and from terminal block
TB139 to connector D6256J. New
wires should be routed with green
color tie bundle.
Use Lacing Tape 289T0341-105 -
4 Install Clamp BACC10DK2 1 -
Use Filler BACP20BA1 1 -
Screw NAS1801-3-7 1
Washer NAS1149D0332J 1
5 Install Clamp BACC10DK2 1 -
Filler BACP20BA1 1 -
Screw NAS1801-3-26 1
Washer NAS1149D0332J 1
Spacer NAS42DD-6-80 1
6 Route Wire - - From E8 rack to P37
panel with the existing
wire bundle routing.
New wires should be
routed with green color
tie bundle.
On Groups
3 and 8
airplanes
only.Use Lacing Tape 289T0341-105
7 Route Wire - - In P37 panel with the
existing wire bundle
routing. New wires
should be routed with
green color tie bundle.
On Groups
1, 3, 5, 7
and 8
airplanes
only.
Use Lacing Tape 289T0341-105
FIGURE 8. WIRING INSTALLATION - GROUPS 1, 3-5, 7, 8 AND 10 AIRPLANES
Oct 12/95 SHEET 4 OF 4 767-31-0073
50

### Page 53

Commercial
Airplane
Group
767
Service Bulletin
Number: 767-31-0073 Evaluation FormDate: October 12, 1995
ATA System: 3141
Prepared By: Tuan Lam
SUBJECT: INDICATING/RECORDING SYSTEMS - CENTRAL COMPUTERS - INFLIGHT EICAS
MAINTENANCE DATA SELECTION SYSTEM INSTALLATION
Use this evaluation form to tell us what you think of the quality of this service bulletin. We will use the data
that you give us to improve the quality of our service bulletins. Please include data about these or other
items:
- Did this service bulletin meet your estimate of quality?
- How easy is this service bulletin to understand?
- Are the Planning Information, Material Information and Accomplishment Instructions satisfactory?
- Will you do this service bulletin fully? If not, please tell us why.
- Is the Manpower estimate satisfactory?
NOTE: Please do not use this evaluation form to tell us to make changes to your manuals. To make these
changes, please use a Publication Change Request (PCR) form.
Please give us this data:
OPERATOR: TODAY'S DATE:
PREPARED BY: TITLE:
ORGANIZATION: TELEX CODE:
TELEPHONE NUMBER: BASE:
COMMENTS:
If necessary, please use the other side. Thank you for the time you used to give us your comments.
Give the completed evaluation form to your Boeing Field Service Representative or send the evaluation form
directly to this address:
T.J. Taylor, Manager
Service Bulletin Engineering
Boeing Commercial Airplane Group
P.O. Box 3707, Mail Stop 20-85
Seattle, WA 98124-2207
BOEING COMMERCIAL AIRPLANE GROUP P.O. BOX 3707 SEATTLE, WASHINGTON 98124-2207

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
