# Boeing Service Bulletin 777-23-0141: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0034, the docket of a proposed AD (Federal Register 2011-2172, 2013-09422). Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 777-23-0141](https://openairdocs.org/service-documents/boeing/sb-777-23-0141.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 13
- PDF: https://openairdocs.org/files/sha256/ff/eb/ffeb773ba840b5d31b1aa8dd1a7ee4d9005d738c9aeede0900ae036e3518b3ef
- Page: https://openairdocs.org/service-documents/boeing/sb-777-23-0141/file/ffeb773ba840

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial
Airplane
Group
777
Service Bulletin
Number: 777-23-0141 SummaryDate: June 14, 2001
ATA System: 2339
SUBJECT: COMMUNICATIONS - Cabin Management System - Software Changes
CONCURRENT REQUIREMENTS
For all airplanes except WB077 and WB078, you
cannot make the changes given in this service
bulletin unless the changes given in Boeing Service
Bulletin 777-23-0143 are made. The changes given
in Boeing Service Bulletin 777-23-0143 were made
on airplanes WB077 and WB078 before delivery.
BACKGROUND
This service bulletin gives instructions to change the
operational program software (OPS) for the cabin
system control panel (CSCP), the cabin area control
panel (CACP), and the cabin system management
unit (CSMU). The new software will prevent the
seat power control buttons on the CSCP and CACP
from becoming disabled during loadshed conditions.
The new software will also shut off the fluorescent
backlights for the CACP and CSCP touchscreens
while the screen saver is active to increase lamp life.
A panel with the new software will make a "beep"
sound when the panel comes out of screen saver
mode.
An operator reported that, during a partial loadshed
condition, they were unable to turn off power to the
seats. During loadshed conditions, the electrical
load management system (ELMS) controls power to
the seats and the seat power control buttons on the
CSCP and CACP are disabled. As a result, the
power to the seats cannot be controlled by the
operator. The new software changes the cabin
management system to enable the seat power
control buttons during loadshed conditions.
ACTION (PRR 61877-1)
At the CSCP, remove the old CSCP, CACP and
CSMU operational program software (OPS) from the
CSCP mass storage. Install new OPS to the CSCP
mass storage and to the CSCP, CACPs and CSMU.
Reinstall the configuration database. Do a
configuration check to make sure the correct OPS
and configuration database are installed.
EFFECTIVITY
Operator Airplanes
ANA WA131-WA137
BAB WA076-WA080, WB001-WB015
CAT WA101-WA104
EAD WA196-WA198, WB101-WB104
GUN WA116-WA119, WB121-WB125
JAL WA171-WA175
JAS WA206-WA209
KAL WB131-WB132
TII WA086-WA093
UAL WA002-WA017, WA261-WA266,
WB051-WB078
COMPLIANCE
No compliance time is given.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for
airplanes in warranty as of June 23, 2000. Please
refer to Paragraph 2.B., Industry Support
Information.
MANPOWER
Total Elapsed Time
Man-Hours (Hours)
2.75 2.75
MATERIAL INFORMATION
Boeing Supplied Parts
Refer to Paragraph 2.A., Material - Price and
Availability.
777-23-0141
Summary Page 1 of 2

### Page 2

BOEING SERVICE BULLETIN 777-23-0141
(LOCATION OF CSCP MAY BE DIFFERENT THAN SHOWN)
CABIN SYSTEM MANAGEMENT UNIT (CSMU).
CABIN AREA CONTROL PANEL (CACP) AND THE
INSTALL NEW SOFTWARE FOR THE CSCP, THE
AT THE CABIN SYSTEM CONTROL PANEL (CSCP),
V52196
June 14, 2001 777-23-0141
Summary Page 2 of 2

### Page 3

Commercial
Airplane
Group
777
Service Bulletin
Number: 777-23-0141
Date: June 14, 2001
ATA System: 2339
SUBJECT: COMMUNICATIONS - Cabin Management System - Software Changes
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624W001, Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR61877-1 for data about this change.
Airplane Models:
777-200
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
ALL NIPPON AIRWAYS (ANA)
WA131-WA137
BRITISH AIRWAYS (BAB)
WA076-WA080 WB001-WB015
CATHAY PACIFIC AIRWAYS (CAT)
WA101-WA104
CHINA SOUTHERN AIRLINES (GUN)
WA116-WA119 WB121-WB125
EMIRATES (EAD)
WA196-WA198 WB101-WB104
JAPAN AIR SYSTEM (JAS)
WA206-WA209
JAPAN AIRLINES (JAL)
WA171-WA175
KOREAN AIR (KAL)
WB131-WB132
THAI AIRWAYS INTERNATIONAL (TII)
WA086-WA093
June 14, 2001 777-23-0141
Page 1 of 9

### Page 4

BOEING SERVICE BULLETIN 777-23-0141
UNITED AIRLINES (UAL)
WA002-WA017 WA261-WA266 WB051-WB078
IDENTIFICATION BY VARIABLE NUMBER
WA002-WA017 WA076-WA080 WA086-WA093 WA101-WA104 WA116-WA119 WA131-WA137
WA171-WA175 WA196-WA198 WA206-WA209 WA261-WA266 WB001-WB015 WB051-WB078
WB101-WB104 WB121-WB125 WB131-WB132
2. Spares Affected
None
June 14, 2001 777-23-0141
2

### Page 5

BOEING SERVICE BULLETIN 777-23-0141
B. Concurrent Requirements
For all airplanes except WB077 and WB078, you cannot make the changes given in this service
bulletin unless the changes given in Boeing Service Bulletin 777-23-0143 are made. The changes
given in Boeing Service Bulletin 777-23-0143 were made on airplanes WB077 and WB078 before
delivery.
C. Reason
This service bulletin gives instructions to change the operational program software (OPS) for the
cabin system control panel (CSCP), the cabin area control panel (CACP), and the cabin system
management unit (CSMU). The new software will prevent the seat power control buttons on the
CSCP and CACP from becoming disabled during loadshed conditions. The new software will also
shut off the fluorescent backlights for the CACP and CSCP touchscreens while the screen saver is
active to increase lamp life. A panel with the new software will make a "beep" sound when the panel
comes out of screen saver mode.
An operator reported that, during a partial loadshed condition, they were unable to turn off power to
the seats. During loadshed conditions, the electrical load management system (ELMS) controls
power to the seats and the seat power control buttons on the CSCP and CACP are disabled. As a
result, the power to the seats cannot be controlled by the operator. The new software changes the
cabin management system to enable the seat power control buttons during loadshed conditions.
D. Description
At the CSCP, remove the old CSCP, CACP and CSMU operational program software (OPS) from the
CSCP mass storage. Install new OPS to the CSCP mass storage and to the CSCP, CACPs and
CSMU. Reinstall the configuration database. Do a configuration check to make sure the correct OPS
and configuration database are installed.
An evaluation form is attached to this service bulletin. Please use this form to tell us what you think
of the quality of this service bulletin.
E. Compliance
No compliance time is given.
F. Approval
NOTE: Joint Airworthiness Requirements (JAR) compliance status may be found in the Service
Bulletin Index, Part 1.
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this service bulletin comply with the applicable Federal Aviation Regulations (FAR) and
are FAA approved. This service bulletin and the FAA approval were based on the airplane in its
original Boeing delivery configuration or as modified by other FAA approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also
affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory
agency approval before incorporating this service bulletin.
June 14, 2001 777-23-0141
3

### Page 6

BOEING SERVICE BULLETIN 777-23-0141
G. Manpower
The table below shows an estimate of the man-hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
man-hour data if necessary. The estimate does not include lost time. These are some examples of
lost time:
- Time to adjust to the workplace
- Time to schedule the work
- Time to examine the work
- Time to cure the materials
- Time to make the parts
- Time to find the tools.
Task Number of Persons Man-Hours Elapsed Time (Hours)
Change 1 2.5 2.5
Test 1 0.25 0.25
TOTAL FOR EACH AIRPLANE 2.75 2.75
H. Weight and Balance Changes
None
I. Electrical Load Data
Not changed
J. References
1. Existing Data:
a. Engineering Change Memo PRR 61877-1
b. 777 Maintenance Manual (AMM) Subject 23-39-00/201
c. Boeing Service Bulletin 777-23-0143, "COMMUNICATIONS - Cabin Management System -
Cabin System Control Panel And Cabin Area Control Panel Replacement"
2. Data supplied with this service bulletin:
None
3. Installation Drawings Used in the Preparation of This Service Bulletin:
None
K. Publications Changed
Publication Chapter-Section
777 Illustrated Parts Catalog 46-00
June 14, 2001 777-23-0141
4

### Page 7

BOEING SERVICE BULLETIN 777-23-0141
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.E., Existing Parts Accountability, for interchangeability and intermixability
information.
June 14, 2001 777-23-0141
5

### Page 8

BOEING SERVICE BULLETIN 777-23-0141
BLANK PAGE
June 14, 2001 777-23-0141
6

### Page 9

BOEING SERVICE BULLETIN 777-23-0141
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the parts shown in Paragraph 2.C., Parts Necessary For Each Airplane as shown
below. Part availability is shown in the Reorder Lead Time (ROLT). ROLT is calculated from the
date Boeing gets the purchase order.
ROLT Unit Price thru
Part Number Name (weeks) Oct 31/01
285W0295-6 CSCP OPS Disk Set 8.5 $150.00
285W0298-5 CACP OPS Disk Set 8.5 $150.00
285W0292-3 CSMU OPS Disk Set 8.5 $150.00
The parts are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. After the Unit Price date, new price and ROLT data is applicable. Prices are in
United States dollars. Terms: Net 30 days.
Send purchase orders and letters about the supply data to the Director of Spares and refer to this
service bulletin number.
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of June 23, 2000. For
man-hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Product Assurance Contracts. The parts for airplanes in warranty as of that date will be supplied at
no charge. Send a purchase order for the parts to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable number in your purchase order.
C. Parts Necessary For Each Airplane
1. Parts:
To get the parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
QTY Part Number Name
1 285W0295-6 CSCP OPS Disk Set (Contains software
part number 2373-BCE-011-06)
1 285W0298-5 CACP OPS Disk Set (Contains software
part number 2319-BCE-00Y-05)
1 285W0292-3 CSMU OPS Disk Set (Contains software
part number 2375-BCE-012-03)
2. Parts and Materials Supplied by the Operator:
None
D. Parts Necessary to Change Spares
None
June 14, 2001 777-23-0141
7

### Page 10

BOEING SERVICE BULLETIN 777-23-0141
E. Existing Parts Accountability
The parts shown below are changed as shown in this service bulletin. Quantity (QTY) is the number
of parts changed on each airplane.
Existing Part Number RUC Name QTY New Part Number PNC RC
285W0295-4 DIS CSCP OPS Disk Set 1 285W0295-6 S A
285W0298-3 DIS CACP OPS Disk Set 1 285W0298-5 S A
285W0292-2 DIS CSMU OPS Disk Set 1 285W0292-3 S A
RUC Recommended Use Code
DIS - Discard the part.
PNC Part Number Code
S - This is the part number for the new equivalent or replacement part.
- To get a new part, use this part number in your order.
- This part is used in production.
RC Replacement Code
A - Do not use the existing part to replace the new or changed part.
F. Special Tooling - Price and Availability
None
G. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But,
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be
necessary. Examine operator tool supply to make sure all necessary tools are available.
June 14, 2001 777-23-0141
8

### Page 11

BOEING SERVICE BULLETIN 777-23-0141
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES
1. The paragraphs identified with a letter give the general work instructions and the necessary tests.
2. Obey all of the warnings and cautions given in the specified manual sections.
WORK INSTRUCTIONS
A. Remove the old CSCP, CACP and CSMU operational program software (OPS), as shown in
TABLE 1, from the CSCP mass storage. Refer to AMM 777 23-39-00/201, Operational Program
Software Removal from the CSCP Mass Storage.
TABLE 1
Component Software Part Number
CSCP 2371-BCE-011-04
CACP 231F-BCE-00Y-03
CSMU 2374-BCE-012-02
B. Install the new CSCP, CACP and CSMU OPS, as shown in TABLE 2, into the CSCP mass
storage. Refer to AMM 777 23-39-00/201, Phase I Data Installation From the CSCP Disk Drive to
the CSCP Mass Storage.
TABLE 2
Component Disk Set Part Number Software Part Number
CSCP 285W0295-6 2373-BCE-011-06
CACP 285W0298-5 2319-BCE-00Y-05
CSMU 285W0292-3 2375-BCE-012-03
C. Install the new OPS, as shown in TABLE 2, to the CSCP, CACP and CSMU. Refer to AMM 777
23-39-00/201, Operational Program Software Installation (Phase II).
D. Reinstall the configuration database. Refer to AMM 777 23-39-00/201, Configuration Database
Installation.
NOTE: The new OPS in TABLE 2 do not require changes to the configuration database.
E. From the CSCP, do the Operational Program Software and Configuration Database Verification
Test as given in AMM 777 23-39-00/201.
1. Make sure the correct OPS part numbers, as shown in TABLE 2, are shown for the CSCP,
CACP and CSMU.
2. Make sure the correct configuration database part number is installed.
F. Put the airplane back to a serviceable condition.
June 14, 2001 777-23-0141
9

### Page 12

(No text on this page.)

### Page 13

Commercial
Airplane
Group
777
Service Bulletin
Number: 777-23-0141 Evaluation FormDate: June 14, 2001
ATA System: 2339
Prepared By: Michael Nelson
SUBJECT: COMMUNICATIONS - Cabin Management System - Software Changes
Use this evaluation form to tell us what you think of the quality of this service bulletin. We will use the data
that you give us to improve the quality of our service bulletins.
NOTE: Please do not use this evaluation form to tell us to make changes to your manuals. To make these
changes, please use a Publication Change Request (PCR) form.
Please give us this data:
(If necessary, please use the other side. Thank you for the time you used to give us your comments.)
OPERATOR: TODAY'S DATE:
PREPARED BY: TITLE:
ORGANIZATION: TELEX CODE:
TELEPHONE NUMBER: BASE:
Please rate the quality of this service bulletin: (good) 4321 (poor)
Please rate the quality of the illustrations: (good) 4321 (poor)
Will you do the change given by this service bulletin? Yes No If not, please explain:
Is this service bulletin easy to understand? Yes No If not, please explain:
Is this service bulletin easy to use? Yes No If not, please explain:
Are the Planning Information, Material Information, and
Accomplishment Instructions accurate? Yes No If not, please explain:
Is the Manpower estimate accurate? Yes No If not, please explain:
Give the completed evaluation form to your Boeing Field Service Representative or send the evaluation form
directly to this address:
Manager
Service Bulletin Engineering
Boeing Commercial Airplane Group
P.O. Box 3707, Mail Stop 2H-37
Seattle, WA 98124-2207

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
