# Boeing Service Bulletin 777-23-0142: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0033, the docket of a proposed AD (Federal Register 2011-11480, 2011-2171, 2013-09429). Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 777-23-0142](https://openairdocs.org/service-documents/boeing/sb-777-23-0142.md)
- Title as filed: U.S. DOT/FAA - Boeing Service Bulletin
- Pages: 88
- PDF: https://openairdocs.org/files/sha256/28/e1/28e12a1a930a363d85ae76f6f159f3cc744783c0e6b7e2fd4d611590bf388bc6
- Page: https://openairdocs.org/service-documents/boeing/sb-777-23-0142/file/28e12a1a930a

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1o f8 8
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0142
Date: November 25, 2003
ATA System: 2339
MDN
SUBJECT: COMMUNICATIONS - Passenger Address and Entertainment - Cabin Management
System - Cabin Services System Hardware and Software Change
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2003 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third
parties. Treatment of the document and the information it contains is governed by contract with Boeing. For
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, DC-8, DC-9,
DC-10, MD-10, MD-11, MD-80, MD-88, MD-90, and the red-white-and-blue Boeing livery are all trademarks
owned by The Boeing Company; and no trademark license is granted in connection with this document unless
provided in writing by Boeing.

### Page 2

BLANK PAGE
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 88
BOEING SERVICE BULLETIN 777-23-0142
BLANK PAGE

### Page 3

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3o f8 8
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0142 Summary
Date: November 25, 2003
ATA System: 2339
MDN
SUBJECT: COMMUNICATIONS - Passenger Address and Entertainment - Cabin Management
System - Cabin Services System Hardware and Software Change
CONCURRENT REQUIREMENTS
For airplanes in Group 4, Boeing Service Bulletin 777-23-0057, is necessary to be accomplished prior to or
concurrent with this service bulletin.
For airplanes in Group 4, the related JAMCO service letter is SL-K0789.
BACKGROUND
This service bulletin gives instructions to change the hardware and software for the cabin services system (CSS)
from the version 1 (CSS v1) configuration to the version 2 (CSS v2) configuration.
– Cabin services system version 1 (CSS v1) was installed on twelve airplanes when the cabin management
system (CMS) was changed to separate the in-flight entertainment functions from the passenger service
system functions. CSS v1 is an intermediate system with new software and the original CMS hardware
panels. Because CSS v1 was only delivered on twelve airplanes, it is difficult to support and maintain.
– The installation of CSS v2 will prevent a problem with decreased lamp life of the fluorescent backlights that
occurs with CSS v1 installed.
The change described in this service bulletin will also change the operation of cabin lighting system when the
CABIN/UTILITY switch is installed.
– We have received numerous reports of smoke or flames in the passenger cabin related to the wiring for the
passenger cabin in-flight entertainment system, cabin lighting and passenger seats. It is not easy to
r e m o v et h ee l e c t r i c a lp o w e rt ot h e s es y s t e m st os t o pt h es m o k ea n df l a m e s .
– A CABIN/UTILITY switch can be installed to remove power to some systems in the passenger cabin. This
change to the cabin services system (CSS) operational software (OPS) will change the way various lighting
systems operate when the switch is set to "OFF".
– When the CABIN/UTILITY switch is set to OFF, all night lights, reading lights and attendant work lights will
come on. Commands from the cabin control panels for night light operation will be ignored. A message
will be shown on the cabin control panels which says "REDUCED POWER CONDITION - Fluorescent
lights may be off. Night lights are locked on". This message replaces the Function Lock-Out - Reduced
Power pop-up screen.
– When the CABIN/UTILITY switch is set to ON, control of the cabin lighting systems by the cabin control
panels is put back to normal and the REDUCED POWER CONDITION message is removed.
– The cabin control panels will show the state of the CABIN/UTILITY switch on the Input Monitor - ARINC
629 Bus screen.
– Boeing Service Related Problem (SRP) 777-SRP-24-0091 is related to this part of the change in the service
bulletin.

### Page 4

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 88
BOEING SERVICE BULLETIN 777-23-0142
Boeing did a cost benefit analysis on the changes given in this service bulletin. Refer to Appendix C for the
analysis.
ACTION (PRR 61877-1, PRR 61887)
Remove the three CACPs.
On Group 1 airplanes, change wires at the P101 distribution integration panel and at the CACP location at door
2-Left.
On Group 2 airplanes, change wires at the P101 and P102 distribution integration panels and at the CACP
locations at door 1-Left and door 2-Left.
On Group 3 airplanes, change wires at the P101 and P102 distribution integration panels, at the CACP location
at door 1-Left and from AP0715 to lavatory 2F-1L at door 2-Left.
On Group 4 airplanes, change wires at the P102 and P103 distribution integration panels and at the CACP
location at door 2-Left.
Install one cabin control panel (CCP) as a CSCP and two CCPs as CACPs.
On Group 1, 2, and 3 airplanes, remove the CSCP and modify the purser station.
On Group 4 airplanes, remove the CSCP and modify the A-4 galley as given in a JAMCO service letter.
Install operational program software (OPS) for the CACP, zone management units (ZMUs), and cabin system
management unit (CSMU). If necessary, install OPS for the overhead electronics units (OEUs).
Make a change to the CSS configuration database (CDB). Install the new database in the CSS components.
Do a test of the cabin services system (CSS).
EFFECTIVITY
COMPLIANCE
No compliance time is given.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of January 6, 1997. Please refer to
Paragraph 2.B., Industry Support Information.
Operator Airplanes
ANA (Group 1) WA221-WA222
EGP (Group 2) WB151-WB153
MAS (Group 3) WB161-WB164
SIA (Group 4) WB181-WB183

### Page 5

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5o f8 8
BOEING SERVICE BULLETIN 777-23-0142
MANPOWER
On Group 4 airplanes, the change to the galley as given in the JAMCO service letter is not included.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Airplanes Total Task Hours Elapsed Hours
Group 1 9.0 7.5
Group 2 9.0 7.5
Group 3 12.0 10.5
Group 4 8.25 6.75

### Page 6

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 88
BOEING SERVICE BULLETIN 777-23-0142
PURSER STATION
AND 3, MODIFY
ON GROUPS 1, 2
(EXAMPLE)
PURSER STATION
PANEL (CSCP)
SYSTEM CONTROL
REMOVE CABIN
LETTER
PER JAMCO SERVICE
MODIFY GALLEY A-4
ON GROUP 4,
CONTROL PANELS (CCP)
INSTALL THREE CABIN
CONTROL PANELS (CACP)
REMOVE THREE CABIN AREA
(EXAMPLE)
ATTENDANT STATION
FWD
W44286
GROUPS 2, 3 AND 4,
P102 PANEL P103 PANEL
CHANGE WIRE AT
GROUP 4,
P101 PANEL
CHANGE WIRE AT
GROUPS 1, 2 AND 3,
CHANGE WIRE AT
2F-1L
AP0715 TO LAVATORY
CHANGE WIRES FROM
GROUP 3,
LOCATIONS
DOOR 1 AND DOOR 2
CHANGE WIRES AT
GROUPS 1, 2 AND 3,
DOOR 2 LOCATIONS
CHANGE WIRES AT
GROUP 4,

### Page 7

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7o f8 8
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0142
Date: November 25, 2003
ATA System: 2339
MDN
SUBJECT: COMMUNICATIONS - Passenger Address and Entertainment - Cabin Management
System - Cabin Services System Hardware and Software Change
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-24W001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 61877-1 and PRR 61887 for data about this change.
Airplane models:
777-200
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
ALL NIPPON AIRWAYS (ANA)
1 WA221–WA222
EGYPTAIR (EGP)
2 WB151–WB153
MALAYSIA AIRLINES (MAS)
3 WB161–WB164
SINGAPORE AIRLINES (SIA)
4 WB181–WB183

### Page 8

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 88
BOEING SERVICE BULLETIN 777-23-0142
IDENTIFICATION BY VARIABLE NUMBER
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for
the recommended use.
B. Concurrent Requirements
For airplanes in Group 4, you cannot make the changes given in this service bulletin unless the
changes given in Boeing Service Bulletin 777-23-0057 are made.
For airplanes in Group 4, the related JAMCO service letter is SL-K0789.
C. Reason
This service bulletin gives instructions to change the hardware and software for the cabin services
system (CSS) from the version 1 (CSS v1) configuration to the version 2 (CSS v2) configuration.
– Cabin services system version 1 (CSS v1) was installed on twelve airplanes when the cabin
management system (CMS) was changed to separate the in-flight entertainment functions from
the passenger service system functions. CSS v1 is an intermediate system with new software
and the original CMS hardware panels. Because CSS v1 was only delivered on twelve airplanes,
it is difficult to support and maintain.
– The installation of CSS v2 will prevent a problem with decreased lamp life of the fluorescent
backlights that occurs with CSS v1 installed.
The change described in this service bulletin will also change the operation of cabin lighting system
when the CABIN/UTILITY switch is installed.
– We have received numerous reports of smoke or flames in the passenger cabin related to the
wiring for the passenger cabin in-flight entertainment system, cabin lighting and passenger seats.
It is not easy to remove the electrical power to these systems to stop the smoke and flames.
– A CABIN/UTILITY switch can be installed to remove power to some systems in the passenger
cabin. This change to the cabin services system (CSS) operational software (OPS) will change
the way various lighting systems operate when the switch is set to "OFF".
– When the CABIN/UTILITY switch is set to OFF, all night lights, reading lights and attendant work
lights will come on. Commands from the cabin control panels for night light operation will be
ignored. A message will be shown on the cabin control panels which says "REDUCED POWER
CONDITION - Fluorescent lights may be off. Night lights are locked on". This message replaces
the Function Lock-Out - Reduced Power pop-up screen.
– When the CABIN/UTILITY switch is set to ON, control of the cabin lighting systems by the cabin
control panels is put back to normal and the REDUCED POWER CONDITION message is
removed.
– The cabin control panels will show the state of the CABIN/UTILITY switch on the Input Monitor -
ARINC 629 Bus screen.
Variable Group
WA221–WA222 1
WB151–WB153 2
WB161–WB164 3
WB181–WB183 4

### Page 9

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9o f8 8
BOEING SERVICE BULLETIN 777-23-0142
– Boeing Service Related Problem (SRP) 777-SRP-24-0091 is related to this part of the change in
the service bulletin.
Boeing did a cost benefit analysis on the changes given in this service bulletin. Refer to Appendix C
for the analysis.
D. Description
Remove the three CACPs.
On Group 1 airplanes, change wires at the P101 distribution integration panel and at the CACP
location at door 2-Left.
On Group 2 airplanes, change wires at the P101 and P102 distribution integration panels and at the
CACP locations at door 1-Left and door 2-Left.
On Group 3 airplanes, change wires at the P101 and P102 distribution integration panels, at the CACP
location at door 1-Left, and from AP0715 to lavatory 2F-1L at door 2-Left.
On Group 4 airplanes, change wires at the P102 and P103 distribution integration panels and at the
CACP location at door 2-Left.
Install one cabin control panel (CCP) as a CSCP and two CCPs as CACPs.
On Group 1, 2, and 3 airplanes, remove the CSCP and modify the purser station.
On Group 4 airplanes, remove the CSCP and modify the A-4 galley as given in a JAMCO service
letter.
Install operational program software (OPS) for the CACP, zone management units (ZMUs) and cabin
system management unit (CSMU). If necessary, install OPS for the overhead electronics units
(OEUs).
Make a change to the CSS configuration database (CDB). Install the new database in the CSS
components.
Do a test of the cabin services system (CSS).
The airplane effectivity is divided into 4 groups. The groups have different locations for their CSCPs
and CACPs.
Note: On Group 1 and Group 3 airplanes, after incorporation of this service bulletin, you will no longer
be able to print from the CSCP if that feature was previously available. A subsequent service
bulletin will install the necessary lavatory wiring to allow printing from the CSCP.
E. Compliance
No compliance time is given.

### Page 10

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 88
BOEING SERVICE BULLETIN 777-23-0142
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this service bulletin comply with the applicable Federal Aviation Regulations (14 CFR Part
25) and Joint Aviation Requirements (JAR-25) and are FAA/JAA approved. This service bulletin and
FAA/JAA approval were based on the airplane in it's original Boeing delivery configuration or as
modified by other FAA/JAA approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency
approval before incorporating this service bulletin.
Note: Joint Airworthiness Requirements (JAR) compliance status may be found in the Service Bulletin
Index, Part 1.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task-hour data if necessary. The estimate does not include lost time. These are some examples of
lost time:
— Time to adjust to the workplace
— Time to schedule the work
— T i m et oe x a m i n et h ew o r k
— T i m et oc u r et h em a t e r i a l s
— T i m et om a k et h ep a r t s
— T i m et of i n dt h et o o l s .
Group 1 Airplanes
Task
Number of
Persons Task-Hours Elapsed Hours
Open Access 2 1.0 0.5
Remove CACPs 1 0.5 0.5
Change Wires 1 0.25 0.25
Install CCPs 1 0.5 0.5
Remove CSCP 1 0.25 0.25
Modify Purser
Station
11 . 5 1 . 5
Close Access 2 1.0 0.5
Install Software 1 3.0 3.0
Test 2 1.0 0.5
TOTAL FOR EACH AIRPLANE 9.0 7.5

### Page 11

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 88
BOEING SERVICE BULLETIN 777-23-0142
Group 2 Airplanes
Task
Number of
Persons Task-Hours Elapsed Hours
Open Access 2 1.0 0.5
Remove CACPs 1 0.5 0.5
Change Wires 1 0.75 0.75
Install CCPs 1 0.5 0.5
Remove CSCP 1 0.25 0.25
Modify Purser
Station
11 . 0 1 . 0
Close Access 2 1.0 0.5
Install Software 1.0 3.0 3.0
Test 2 1.0 0.5
TOTAL FOR EACH AIRPLANE 9.0 7.5
Group 3 Airplanes
Task
Number of
Persons Task-Hours Elapsed Hours
Open Access 2 1.0 0.5
Remove CACPs 1 0.5 0.5
Change Wires 1 3.25 3.25
Install CCPs 1 0.5 0.5
Remove CSCP 1 0.25 0.25
Modify Purser
Station
11 . 5 1 . 5
Close Access 2 1.0 0.5
Install Software 1 3.0 3.0
Test 2 1.0 0.5
TOTAL FOR EACH AIRPLANE 12 10.5
Group 4 Airplanes
Task
Number of
Persons Task-Hours Elapsed Hours
Open Access 2 1.0 0.5
Remove CACPs 1 0.5 0.5
Change Wires 1 0.75 0.75
Install CCPs 1 0.5 0.5
Remove CSCP
and Tray Assembly
10 . 5 0 . 5
Close Access 2 1.0 0.5

### Page 12

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 88
BOEING SERVICE BULLETIN 777-23-0142
On Group 4 airplanes, the change to the galley, as given in JAMCO Service Letter No. SL-K0789, is
not included.
H. Weight and Balance Changes
I. Electrical Load Data
1. Alternating Current (AC) Loads
J. References
1. Existing Data:
a. Engineering Change Memo PRR 61877-1, PRR 61887
b. Service Related Problem (SRP) 777-SRP-24-0091
c. 777 Maintenance Manual (AMM) Subject 20-10-01/401, 23-39-00/201, 23-39-16/201, 25-
21-06/401
d. 777 Wiring Diagram 23-33-12, 23-33-13, 23-33-14, 23-42-21, 33-22-31
e. Boeing Standard Wiring Practices Manual (BSWPM) 20-10-11, 20-10-12, 20-10-15, 20-10-
19, 20-30-16, 20-25-14, 20-35-11, 20-61-00, 20-61-11, 20-90-11
f. Boeing Standard Overhaul Practices Manual (BSOPM) 20-30-03, 20-50-10
g. Boeing Service Bulletin 777-23-0057, "COMMUNICATIONS - Passenger Address and
Entertainment - Cabin Management System - Cabin System Control Panel Wire Change"
Install Software 1 3.0 3.0
Test 2 1.0 0.5
TOTAL FOR EACH AIRPLANE 8.25 6.75
Airplane
Change in Weight
(Pounds)
Change in Moment
(Pound-Inches)
Group 1 -38.0 -43624.0
Group 2 -37.5 -43050.0
Group 3 -37.1 -42590.8
Group 4 -41.1 -47182.8
Watts Bus Circuit Breaker
Name Number Location
-19 R Bus AREA CONTROL
PANELS
C23444 P210 / D9
Group 4 Airplanes
Task
Number of
Persons Task-Hours Elapsed Hours

### Page 13

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 88
BOEING SERVICE BULLETIN 777-23-0142
h. JAMCO Service Letter No. SL-K0789
Note: The supplier was told to send copies of the service letter to the operator.
i. Boeing Parts Standards Document D-590
j. Boeing Drawing 012W6100
k. Boeing Configuration Database Generator (CDG) User Guide, D634W602-1, Rev 2
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
These drawings were used to prepare this service bulletin. These drawings are not necessary
to make the specified changes, and are not supplied with this service bulletin. These drawings
may not be applicable to all airplane configurations or operators.
Drawing Number Title
288W5541 Wire Bundle Instl - Purser Station
439W1006 Module Instl - Purser Station
439W1009 Module Instl - Purser Station, Flex Zone
439W1010 Module Instl - Purser Station
439W1106 Equipment Instl - Purser Station
439W1109 Equipment Instl - Purser Station, Flex Zone
439W1110 Equipment Instl - Purser Station, 1F-1C
439W1208 Module and Equipment Instl - Video Control Center, A-4 Galley
439W2006 Module Assy - Wiring, Purser Station
439W2009 Module Assy - Wiring Purser Station
439W2010 Module Assy - Wiring, Purser Station
439W3201 Shell Assy - Purser Station
439W3206 Shell Assy - Purser Station
439W3209 Shell Assy - Purser Station
476W1000 Instl Details - Cabin Controls
476W6306 Cabin Control Panel Instl

### Page 14

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 88
BOEING SERVICE BULLETIN 777-23-0142
K. Publications Affected
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability
information.
Publication Chapter-Section
777 Wiring Diagram Manual 23-33
777 Illustrated Parts Catalog 23-39, 25-29 (Group 4), 25-31 (Group 4)

### Page 15

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 88
BOEING SERVICE BULLETIN 777-23-0142
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary For Each Airplane as shown
below. If there is a limit in the quantity (QTY) of kits, a supply sequence is given by Spares.
The kits are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. After the Unit Price date, new price data is applicable. Prices are in United States
dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of January 6, 1997. For man-
hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Spares. Please refer to this
service bulletin number and reference the airplane variable numbers in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits shown below, refer to Paragraph 2.A., Material - Price and Availability.
Note: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the
Kit Number Name Date QTY
Unit Price thru
Dec 31/03
005W3210-1
(Group 1 airplanes)
Topkit - Cabin Control
Panel Installation
Oct 24/03 1 $119,842.00
Nov 07/03 1
005W3210-2
(Group 2 airplanes)
Topkit - Cabin Control
Panel Installation
Jan 30/04 3 $119,948.00
005W3210-3
(Group 3 airplanes)
Topkit - Cabin Control
Panel Installation
Jan 30/04 4 $120,338.00
005W3210-4
(Group 4 airplanes)
Topkit - Cabin Control
Panel Installation
Nov 07/03 3 $119,709.00

### Page 16

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 88
BOEING SERVICE BULLETIN 777-23-0142
Operator, are necessary for each airplane.
Kit 005W3210
New Part
Number
QTY
Name
Existing Part
Number Notes-4 -3 -2 -1
005W3210-1 . . . - Top Kit, Group 1
Airplanes
005W3210-2 . . - . Top Kit, Group 2
Airplanes
005W3210-3 . - . . Top Kit, Group 3
Airplanes
005W3210-4 - . . . Top Kit, Group 4
Airplanes
005W3210-10 . 1 1 1 Subkit, CCP/CSCP
005W3210-11 1 . . . Subkit, CCP/CSCP
005W3210-12 . 2 2 2 Subkit, CCP/CACP
005W3210-13 2 . . . Subkit, CCP/CACP
439W1403-1B . . . 1 Retrofit Kit, Purser
Station
439W1403-2B . 1 . . Retrofit Kit, Purser
Station
439W1403-3B . . 1 . Retrofit Kit, Purser
Station
280W5112-1 . . . 1 Wirekit
280W5112-2 . . 1 . Wirekit
280W5112-3 1 . . . Wirekit
280W5112-4 . 1 . . Wirekit
Kit 005W3210
New Part
Number
QTY
Name
Existing Part
Number Notes-13 -12 -11 -10
005W3210-10 . . . - Subkit, CCP/CSCP
005W3210-11 . . - . Subkit, CCP/CSCP
005W3210-12 . - . . Subkit, CCP/CACP
005W3210-13 - . . . Subkit, CCP/CACP
2 8 5 W 0 8 6 3 - 6 1111 C a b i n C o n t r o l
Panel
285W0012-3 or
285W0012-4
(a)(b)(c)
285W0895-1 . . 1 1 Disk Drive (b)
285W0925-3 . . 1 1 Mass Memory Card (b)
476W2110-3D . . 1 . Front Shroud 476W2110-1( ) (a)(b)(c)
476W2110-3G . . . 1 Front Shroud 476W2110-1( ) (a)(b)(c)
476W2111-5D . . 1 . Rear Shroud Assy 476W2111-1( ) (a)(b)(c)

### Page 17

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 88
BOEING SERVICE BULLETIN 777-23-0142
476W2111-5G . . . 1 Rear Shroud Assy 476W2111-1( ) (a)(b)(c)
285W0896-2 1 1 . . Mass Memory Card (b)
476W2110-2D 1 . . . Front Shroud 476W2110-1( ) (a)(b)(c)
476W2110-2G . 1 . . Front Shroud 476W2110-1( ) (a)(b)(c)
476W2111-4D 1 . . . Rear Shroud Assy 476W2111-1( ) (a)(b)(c)
476W2111-4G . 1 . . Rear Shroud Assy 476W2111-1( ) (a)(b)(c)
(a) Discard the existing part. Keep the existing part if there are other uses for it.
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
Kit 439W1403
New Part
Number
QTY
Name
Existing Part
Number Notes-3B -2B -1B
439W1403-1B . . - Top Kit, Retrofit Kit
439W1403-2B . - . Top Kit, Retrofit Kit
439W1403-3B - . . Top Kit, Retrofit Kit
439W3271-16B . 1 . Cover 439W3271-28A (a)(c)
439W3271-47B 1 . . Cover 439W3271-41B (a)(c)
439W3278-144B . 1 1 Plate (b)
439W3278-145B 1 . . Plate (b)
BACN10YD1G 2 . . Nut, Clip-On
BACN10YD3G 2 . . Nut, Clip-On
BACS12FA3K5 . 4 4 Screw
BACS12FA3K6 2 . . Screw
BACS12FA3K7 2 . . Screw
SL2334-3A3 . 4 4 Insert
(a) Discard the existing part. Keep the existing part if there are other uses for it.
(b) This part is not used in production.
(c) You cannot use the existing part to replace the new or changed part.
(e) If grip length shown is not available at Boeing, fasteners supplied in kits may be one
grip length longer than indicated. Also, if any fasteners part numbers listed are not
available or have been superseded, substitute fasteners may be supplied in kits. Boeing
Document D-590 and Boeing Drawing 012W6100 are used to determine the part
numbers used as substitutes.
Kit 005W3210
New Part
Number
QTY
Name
Existing Part
Number Notes-13 -12 -11 -10

### Page 18

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 88
BOEING SERVICE BULLETIN 777-23-0142
Kit 280W5112
New Part
Number
QTY Name Existing Part
Number
Notes
-102 -101 -4 -3 -2 -1
2 8 0 W 5 1 1 2 - 1 .....- W i r e k i t
2 8 0 W 5 1 1 2 - 2 ....-. W i r e k i t
280W5112-3 . . . - . . Wirekit
280W5112-4 . . - . . . Wirekit
280W5112-101 . - . . . 1 Kit Subassembly
(W0479)
2 8 0 W 5 1 1 2 - 1 0 1 0 1 . 1 .... I . D . T a p e
2 8 0 W 5 1 1 2 - 1 0 1 0 2 . 1 .... T i e W r a p , 1 8 D Z - A ,
White
280W5112-102 - . 1 . 1 1 Kit Subassembly
(W1011)
2 8 0 W 5 1 1 2 - 1 0 2 0 1 1 ..... T i e W r a p , 1 8 D Z - A ,
Brown
280W5112-103 . . . 1 . . Kit Subassembly
(W1031)
280W5112-104 . . 1 . 1 . Kit Subassembly
(W6087)
2 8 0 W 5 1 1 2 - 1 0 5 . . 1111 K i t S u b a s s e m b l y
(W6943)
280W5112-107 . . 1 . . . Kit Subassembly
(W6023)
3 2 4 4 8 4 1 ..... E n d C a p
Kit 280W5112
New Part
Number
QTY Name Existing Part
Number
Notes
-107 -105 -104 -103
280W5112-103 . . . - Kit Subassembly
(W1031)
280W5112-104 . . - . Kit Subassembly
(W6087)
280W5112-10401 . . 1 . I. D. Tape
280W5112-10402 . . 1 . Tie Wrap, 18DZ-A,
White
280W5112-105 . - . . Kit Subassembly
(W6943)
280W5112-10501 . 1 . . I. D. Tape
280W5112-10502 . 1 . . I. D. Tape
280W5112-10503 . 1 . . Tie Wrap, 18DZ-A,
Brown
280W5112-10504 . 1 . . I. D. Tape

### Page 19

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 88
BOEING SERVICE BULLETIN 777-23-0142
280W5112-10505 . 1 . . Shielding Tape,
Scotch No. 24
280W5112-10506 . 1 . . Insulation Tape,
Scotch No. 70
280W5112-10507 . 1 . . Insulation Tape,
Permacel P-421
280W5112-107 - . . . Kit Subassembly
(W6023)
280W5112-107W 1 . . . Wire
280W5112-10701 1 . . . I. D. Tape
280W5112-10702 1 . . . Tie Wrap, 18DZ-A,
White
280W5112-10703 1 . . . I. D. Tape
324484 . 7 . 1 End Cap
557B071NF530S . 1 . . Backshell
(DM23555BT)
BACB42F3 1 1 . . Band, Shield
Terminator
BACC47CN1S 4 . . . Pin Contact
BACC47CP1S 4 . . . Socket Contact
BACC63CB12-
12S6
1 . . . Plug Connector
(D01607P)
BACS13CT3B . 1 . . Solder Sleeve with
Shield Ground
BACS13CT5C 2 . . . Solder Sleeve with
Shield Ground
CDMA50P-K87 . 1 . . Plug Connector
(DM23555B)
M39029/64-369 . 4 . . Pin Contact
S280W603-302 1 . . . Backshell
(D06107PQ)
Kit 280W5112
New Part
Number
QTY Name Existing Part
Number
Notes
-107 -105 -104 -103

### Page 20

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 88
BOEING SERVICE BULLETIN 777-23-0142
2. Parts and Materials Supplied by the Operator:
3. Parts Modified and Reidentified:
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
Part Number /
Specification QTY Name Existing Part Number Notes
BMS 5-28, Type
18, Class 2
1 Potting Compound (a)(b)
(a) Group 1 and Group 3 Airplanes
(b) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Existing Part
Number QTY Name New Part Number Notes
439W3217-126A 1 Close Out Panel (b) (a)(e)
439W3217-264A 1 Close Out Panel (b) (a)(c)
476W2126-4 1 Angle (b) (a)(d)
476W2126-5 1 Angle (b) (a)(d)
(a) Make the change given in this service bulletin.
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change given in this service bulletin was made.
(c) Group 1 Airplanes.
(d) Group 2 Airplanes.
(e) Group 3 Airplanes.

### Page 21

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 88
BOEING SERVICE BULLETIN 777-23-0142
4. Parts Removed and Not Replaced:
Group 1 Airplanes
Existing
Part Number Name QTY Notes
285W0011-4 or
285W0011-5
Cabin System
Control Panel
(CSCP)
1( a )
476W0733-1 Bracket Assembly 1 (a)
476W0734-3 Tray Assembly 1 (a)
476W2100-1G Bezel Assembly 1 (a)
BAC27WEL531 Placard 1 (a)
(a) Keep the part if there are other uses for it.
Group 2 Airplanes
Existing
Part Number Name QTY Notes
285W0011-4 or
285W0011-5
Cabin System
Control Panel
(CSCP)
1( a )
476W0734-3 Tray Assembly 1 (a)
476W2100-1G Bezel Assembly 1 (a)
476W2732-7 Tray Support
Assembly
1( a )
476W2732-9 Tray Support
Assembly
1( a )
476W2732-11 Tray Support
Assembly
1( a )
BAC27WEL531 Placard 1 (a)
(a) Keep the part if there are other uses for it.
Group 3 Airplanes
Existing
Part Number Name QTY Notes
285W0011-3,
285W0011-4, or
285W0011-5
Cabin System
Control Panel
(CSCP)
1( a )
476W0733-1 Bracket Assembly 1 (a)
476W0734-3 Tray Assembly 1 (a)
476W2100-1G Bezel Assembly 1 (a)
BAC27WEL531 Placard 1 (a)
(a) Keep the part if there are other uses for it.

### Page 22

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 88
BOEING SERVICE BULLETIN 777-23-0142
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But,
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be
necessary. Examine operator tool supply to make sure all necessary tools are available.
Group 4 Airplanes
Existing
Part Number Name QTY Notes
285W0011-4 or
285W0011-5
Cabin System
Control Panel
(CSCP)
1( a )
476W0734-4 Tray Assembly 1 (a)
476W2100-1D Bezel Assembly 1 (a)
476W3007-1 Shell Assembly 1 (a)
(a) Keep the part if there are other uses for it.

### Page 23

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 88
BOEING SERVICE BULLETIN 777-23-0142
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
Note:
1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch.
— Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
— Angular tolerance is plus or minus 2 degrees
— Hole dimensions for standard solid rivets are given in 777 Structural Repair Manual,
Chapter 51
— Torque limits to tighten nuts and bolts are given in 777 Structural Repair Manual,
Chapter 51.
4. For approved fastener and process material substitutions, refer to 777 Structural Repair
Manual, Chapter 51, Alternate fasteners are given in 777 Structural Repair Manual
Chapter 51 and Boeing Drawing 012W6100.
5. Refer to the Boeing Standard Wiring Practices Manuals 20-10-11 and 20-10-12 for the
wire installation procedures and 20-10-19 for wire separation requirements.
6. If the length of fasteners specified in this service bulletin do not meet the installation
standards, fasteners of the same specification, or an approved substitute, one grip length
longer or shorter may be used.
7. The Configuration Database Generator (CDG) is a ground support engineering software
tool that is hosted on a personal computer (PC) and used to build the Configuration
Database (CDB) media sets for individual airplanes.
B. WORK INSTRUCTIONS
1. Open these circuit breakers and attach DO-NOT-CLOSE tags:
Location
(Panel/Position)
Nomenclature Circuit Breaker
P110 / A16 CAB SYS MGMT UNIT C23400
P110 / F1 ZONE MGMT UNIT 1 C23415
P110 / H4 ZONE MGMT UNIT 3 C23419

### Page 24

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 88
BOEING SERVICE BULLETIN 777-23-0142
2. On Group 1, Group 2 and Group 3 airplanes, at station 450, left aisle, remove the inboard main
ceiling panel to access the P101 distribution integration panel. Refer to 777 AMM 25-21-06/401.
3. On Group 2, Group 3 and Group 4 airplanes, at station 950, left aisle, remove the inboard main
ceiling panel to access the P102 distribution integration panel. Refer to 777 AMM 25-21-06/401.
4. On Group 4 airplanes, at station 1730, left aisle, remove the inboard main ceiling panel to access
the P103 distribution integration panel. Refer to 777 AMM 25-21-06/401.
5. On Group 3 airplanes, at station 711, left aisle, remove the outboard main ceiling panel to access
the AP0715 disconnect bracket above lavatory 2F-1L. Refer to 777 AMM 25-21-06/401.
6. Remove the three CACPs as shown in Figure 1.
7. On Group 1 airplanes, change wires as follows:
a. Change wires at the P101 distribution integration panel as shown in Figure 2.
b. Change wires at the CACP 2 location at door 2-Left as shown in Figure 8.
8. On Group 2 airplanes, change wires as follows:
a. Change wires at the P101 distribution integration panel as shown in Figure 3.
b. Change wires at the P102 distribution integration panel as shown in Figure 5.
c. Change wires at the CACP 1 location at door 1-Left as shown in Figure 7.
d. Change wires at the purser station at door 2-Left as shown in Figure 9.
9. On Group 3 airplanes, change wires as follows:
a. Change wires at the P101 distribution integration panel as shown in Figure 4.
b. Change wires at the P102 distribution integration panel as shown in Figure 5.
c. Change wires at the CACP 1 location at door 1-Left as shown in Figure 7.
d. Add wires from AP0715 disconnect bracket to lavatory 2F-1L at door 2-Left as shown in
Figure 11.
10. On Group 4 airplanes, change wires as follows:
a. Change wires at the P102 distribution integration panel as shown in Figure 5.
P210 / D9 AREA CONTROL
PANELS
C23444
P210 / E5 VIDEO PGMS & CTRL C23403
P210 / E25 ZONE MGMT UNIT 2 C23417
Location
(Panel/Position)
Nomenclature Circuit Breaker

### Page 25

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 88
BOEING SERVICE BULLETIN 777-23-0142
b. Change wires at the P103 distribution integration panel as shown in Figure 6.
c. Change wires at the purser station at door 2-Left as shown in Figure 10.
11. Install a CCP as the CSCP as shown in Figure 12.
12. Install two CCPs as CACPs as shown in Figure 13.
13. On Group 1 airplanes, do these steps to remove the CSCP and modify the purser station at
station 288:
a. Remove the CSCP as shown in Figure 14.
b. Change the wires in the purser station as shown in Figure 15
c. Modify the close-out panel as shown in Figure 16.
d. Modify the purser station as shown in Figure 17.
14. On Group 2 airplanes, do these steps to remove the CSCP and modify the purser station at
station 695:
a. Remove the CSCP as shown in Figure 18.
b. Change the wires in the purser station as shown in Figure 19.
c. Modify the purser station as shown in Figure 20.
15. On Group 3 airplanes, do these steps to remove the CSCP and modify the purser station at
station 247:
a. Remove the CSCP as shown in Figure 21.
b. Change the wires in the purser station as shown in Figure 22.
c. Modify the close-out panel as shown in Figure 23.
d. Modify the purser station as shown in Figure 24.
16. On Groups 4 airplanes, do these steps to remove the CSCP and modify the A-4 galley at station
2008:
a. Remove the CSCP and tray assembly as shown in Figure 25.
b. Modify the A-4 galley as given in JAMCO Service Letter SL-K0789.
17. Install removed ceiling panels as given in 777 AMM 25-21-06/401.

### Page 26

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 88
BOEING SERVICE BULLETIN 777-23-0142
18. Remove the DO-NOT-CLOSE tags and close these circuit breakers:
19. Do a phase two installation of the new CSMU software part number 2313-BCE-01T-03. Refer to
the 777 AMM 23-39-00/201, Operational Program Software Installation (Phase II).
20. Do a phase two installation of the new CACP software part number 2313-BCE-01U-02. Refer to
the 777 AMM 23-39-00/201, Operational Program Software Installation (Phase II).
21. Do a phase two installation of the new ZMU software part number 2374-BCE-021-02. Refer to
the 777 AMM 23-39-00/201, Operational Program Software Installation (Phase II).
22. If necessary, do a phase two installation of the OEU software part number 2310-BCE-01V-02.
Refer to the 777 AMM 23-39-00/201, Operational Program Software Installation (Phase II).
23. Do a phase I installation of the new configuration database. Refer to the 777 AMM 23-39-00/201,
Phase I Data Installation From the CSCP Disk Drive to the CSCP Mass Storage. To get the new
database, do these steps:
Note: Refer to the Boeing Configuration Database Generator (CDG) User Guide, Version
285W0881-3, D634W602-1, Rev 2. CDG software part number 285W0550-03 is
necessary to change the database.
a. Get ready to make a change to the configuration database (CDB):
(1) Load the serviceable database file into a personal computer with Windows 95. Open
the 285W0550-03 CDG tool. Open the database file. Follow the directions to convert
the file if prompted.
(2) Do a consistency check. Make the menu selections "Utilities - Check Consistency".
(3) When the check is completed, make the menu selection "Print". Keep the printed data
to use in a subsequent step.
(4) Make the menu selections "Utilities - Generate reports".
(5) Put a check mark in the box for "Special Functions" (Section 16). Make the selection
"Accept".
(6) When the report is completed, make the selections "Print". Keep the printed data to
use in a subsequent step.
Location
(Panel/Position)
Nomenclature Circuit Breaker
P110 / A16 CAB SYS MGMT UNIT C23400
P110 / F1 ZONE MGMT UNIT 1 C23415
P110 / H4 ZONE MGMT UNIT 3 C23419
P210 / D9 AREA CONTROL
PANELS
C23444
P210 / E5 VIDEO PGMS & CTRL C23403
P210 / E25 ZONE MGMT UNIT 2 C23417

### Page 27

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 88
BOEING SERVICE BULLETIN 777-23-0142
(7) Make the menu selections "File - Save as". Make a new name for the database and
save the file.
Note: The use of the characters “CDB” (i.e. “mmm” code) in the software part number
is exclusively reserved for Boeing generated CMS database software. Boeing
recommends the use of the customer three letter manufacturing designator.
b. Change the CSCP and CACP functions in the CDB:
(1) Change the CSCP:
(a) Make the menu selections "Data menu - LRU configuration - Primary LRU".
(b) Select the "CSCP Address" button and select the ZMU port address for the CSCP
from the dropdown list.
(c) Close the screen.
(d) Revise the CSCP Location Description with the new M number and the new
location.
(2) Change the CACP:
(a) From the same screen, remove the check mark from the "In Config" box for the
deleted CACP.
(b) For the other two CACPs, revise the CACP Location Description with the new M
number.
(c) Accept the screen when done.
Note: A warning message will show that states: This LRU has been removed from
the configuration. This will result in deletion from the database of any
subordinate LRUs or assignments relating to this LRU.
(d) Select "Yes" to continue.
(e) Make the menu selections "Data menu - Panel setup - Panel capabilities".
(f) Make sure that the CACP that you removed the check mark from is deleted.
(3) Change the panel capabilities:
(a) From the same screen in the CDB, scroll to each programmable screen section
and change the panel capabilities for each panel, as necessary.
(b) Click the box as (Blank=NO, X=YES, D=DEFAULT)
(c) Accept the screen when done.
(4) Save the changed CSCP and CACP functions in the CDB:
(a) Make the menu selections "File-Save".

### Page 28

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 88
BOEING SERVICE BULLETIN 777-23-0142
c. Change the cabin attendant work lights functions in the CDB:
(1) Make the menu selections "Data menu-Attendant Work Lights"
(2) See the printed data made before and find all the attendant work lights in the Special
Functions part.
(3) For each attendant work light found in Special Functions, enter the same OEU data
(Input, Output and Location Description) into the new attendant work lights.
(4) Accept the screen when done.
(5) Make the menu selections "Data menu-Special Functions".
(6) Remove the attendant work lights from the special functions by removing the check
mark in the In-Config box.
(7) Accept the screen when done.
(8) Make the menu selections "File-Save".
d. Change the Cabin Utility Switch functions for the crew rest areas in the CDB.
(1) Make the Special Functions for the ground service bus loss outputs and crew rest
reading light outputs.
(a) Make the menu selections "Data - Special Functions".
(b) Find the special function that has "Ground service bus loss" as the input type (i.e.
Special Function number 62). Find any special function that has the crew rest
reading lights. Use the printed data made before to find the special function
number.
Note: If no ground service bus loss or crew rest reading light special functions are
found, no more changes to the database are necessary. Go to the step to
check the database and make the data load discs.
(c) Go to the special function number 79 and put an X in the "In-Config" box. If this
special function number is already used, find a special function number that is not
used and is higher than the one for the Ground service bus loss entry.
(d) From the Input Type box pull down menu, make the selection "CSS Discrete/
Signal". In the CSS Discrete/Signal menu, make the Input Type "Cabin Utility
Switch"
(e) Make the selection "Output Type 2" , then "Edit - Insert Record".
(f) Enter all the same output data from the "Ground service bus loss" special function
and the crew rest reading lights special function.
(g) For each crew rest reading light, make the Initial/Inactive setting "NULL" and the
Active setting "ON". Make the selection "Close" to get to the Special Functions
screen.

### Page 29

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 88
BOEING SERVICE BULLETIN 777-23-0142
(h) Make the selection "Description". Write a new description for the Cabin Utility
Switch special function. If both ground service bus loss and crew rest reading light
special functions are found, include information from both descriptions to make
one description. Use the words "Cabin Utility Switch" instead of "Ground Service
Bus Loss" in the new description.
(i) Make the selection "Accept".
(j) Make the menu selections "File - Save".
e. Do a check of the database and make the data load disks for the new CDB.
(1) Do a consistency check. Make the menu selections "Utilities - Check Consistency".
(2) Change the database as necessary to remove any critical errors.
(3) Optional - It can be a help to examine the warnings before and after the database
changes. A differences report can also give more information. Refer to the CDG Users
Manual D634W602-1 to get the necessary instructions to make these reports.
(4) Make the menu selections "Utilities - Create Data Load disk". Use an operator selected
diskette set part number and make the selection "Accept".
Note: Do not use the characters "222W0014-" in the diskette set part number. These
characters are to be used only for Boeing made database disk sets.
(5) When told, put the first blank disk in the drive a: and make the selection "OK".
Note: Use only new or reformatted High Density 1.44 Mb disks. Errors can occur if the
disk is not reformatted before use.
(6) When told, remove the disk. Read the instructions to make a label for the removed
disk.
(7) When told, put the second blank disk in the drive a: and make the selection "OK".
(8) When told, remove the disk. Read the instructions to make a label for the removed
disk.
24. Install the new configuration database to the CSS LRUs. Refer to the 777 AMM 23-39-00/201,
Configuration Database Installation.
25. Do this functional test of the cabin services system (CSS):
a. Make sure all the CSS circuit breakers are closed as follows:
Location
(Panel/Position)
Nomenclature Circuit Breaker
P110 / A15 OEU ZONE 1 MAIN BUS C23437
P110 / A16 CAB SYS MGMT UNIT C23400
P110 / D15 OEU ZONE 3 RIGHT
MAIN BUS
C23445

### Page 30

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 88
BOEING SERVICE BULLETIN 777-23-0142
Note: All CSS circuit breakers are closed to prevent nuisance messages. If some circuit
breakers cannot be closed, ignore fault messages not related to the replaced LRUs.
b. Touch these selections on the CSCP:
(1) CABIN MAINTENANCE
(2) CABIN CONFIGURATION
(3) CONFIGURATION CHECK
(4) CABIN SYSTEM CONTROL PANEL (CSCP)
P110 / D16 OEU ZONE 3 LEFT MAIN
BUS
C23441
P110 / E16 OEU ZONE 3 CENTER
MAIN BUS
C23443
P110 / F1 ZONE MGMT UNIT 1 C23415
P110 / F2 OEU ZONE 1 XFER BUS C23439
P110 / G2 OEU ZONE 3 XFER BUS C23447
P110 / H4 ZONE MGMT UNIT 3 C23419
P210 /C10 OEU ZONE 2 LEFT MAIN
BUS
C23414
P210 / D9 AREA CONTROL
PANELS
C23444
P210 / D10 OEU ZONE 2 CENTER
MAIN BUS
C23416
P210 / E10 OEU ZONE 2 RIGHT
MAIN BUS
C23418
P210 / E24 OEU ZONE 2 XFER BUS C23420
P210 / E25 ZONE MGMT UNIT 2 C23417
P210 / M05 PAX MASTER CALL LT C33628
P310 / E06
(if applicable)
LLAR SDM C23647
P310 / F06 PAX ADRS CTRL PRI C23632
P310 / F07 PAX ADRS CTRL SEC C23633
P310 / F08 PA DIR ACCESS C23637
P310 / F09 SDM COL 1 C23634
P310 / F10 SDM COL 2 C23635
P310 / F11 SDM COL 3 C23636
P310 / F12 CAB INTPH PRI C23638
P310 / F13 CAB INTPH SEC C23639
P310 / F14 CAB INTPH ZMUS C23640
Location
(Panel/Position)
Nomenclature Circuit Breaker

### Page 31

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 88
BOEING SERVICE BULLETIN 777-23-0142
c. Make sure the CSCP-CCP hardware part number that shows is 285W0863-6, the MMC part
number that shows is 285W0925-3, and the OPS software part number that shows is 230A-
BCE-01L-02. Make sure the database part number is correct.
d. Touch these selections on the CSCP:
(1) PREVIOUS MENU
(2) CABIN AREA CONTROL PANEL (CACP)
e. Make sure the CACP-CCP hardware part number that shows is 285W0863-6, the MMC part
number that shows is 285W0896-2, and the OPS software part number that shows is 2313-
BCE-01U-02. Make sure the database part number is correct.
f. Touch these selections on the CSCP:
(1) PREVIOUS MENU
(2) ZONE MANAGEMENT UNIT (ZMU)
g. Make sure the ZMU hardware part number that shows is correct and the OPS software part
number that shows is 2374-BCE-021-02. Make sure the database part number is correct.
h. Touch these selections on the CSCP:
(1) PREVIOUS MENU
(2) CABIN SYSTEM MANAGEMENT UNIT (CSMU)
i. Make sure the CSMU hardware part number that shows is correct and the OPS software
part number that shows is 2313-BCE-01T-03. Make sure the database part number is
correct.
j. Touch these selections on the CSCP:
(1) PREVIOUS MENU
(2) OVERHEAD ELECTRONICS UNIT (OEU)
k. Make sure the OEU hardware part number that shows is correct and the OPS software part
number that shows is 2310-BCE-01V-02. Make sure the database part number is correct.
l. If the airplane has core print capability, select PRINT PAGE and make sure the page prints.
Note: On Group 1 and Group 3 airplanes, after incorporation of this service bulletin, you will
no longer be able to print from the CSCP if that feature was previously available. A
subsequent service bulletin will install the necessary lavatory wiring to allow printing
from the CSCP.
m. Touch these selections on the CSCP:
(1) CABIN TESTS

### Page 32

November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 88
BOEING SERVICE BULLETIN 777-23-0142
(2) START ALL TEST
n. Select CONTINUE TEST to do the All Test.
o. Make sure the ALL TEST COMPLETE screen or the ALL TEST FAULT REVIEW screen
shows.
p. If the ALL TEST FAULTS REVIEW screen shows, make sure there are no faults related to
the CSCP and CACPs.
(1) If the PANELS button is not active, there are no faults related to the CSCP or CACP.
(2) If the PANELS button is active, select it and then select CONTINUE to review the faults.
q. Select MAIN MENU.
26. Put the airplane back to a serviceable condition.

### Page 33

FIGURE 1: CACP REMOVAL
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 1: CACP REMOVAL
(EXAMPLE)
ATTENDANT STATION
FWD
SEE A
SEE A
(GROUPS 1, 2 AND 3)
SEE A (GROUP 4)
SEE A (GROUPS 2, 3 AND 4)
SEE A (GROUP 1)
A
BSEE
3 (4 LOCATIONS)
4 (4 LOCATIONS)
5
B
2
4(2 LOCATIONS)
3
1
1 (4 LOCATIONS)AUTO-LOCK PIN
W44395
(SHEET 1 OF 2)

### Page 34

FIGURE 1: CACP REMOVAL
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 88
BOEING SERVICE BULLETIN 777-23-0142
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each CACP location. There are 3 CACPs on the
airplane.
CAUTION: DO NOT TOUCH THE CONECTOR PINS OR OTHER CONDUCTORS ON THE CACP. IF YOU
TOUCH THESE CONDUCTORS, ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO
THE CACP.
STEP TASK NAME PART NUMBER QTY NOTES
1
Remove Front Shroud
Assembly
476W2110-1( ) 1 Push a 1.5mm or smaller
allen wrench in the auto-
lock pin holes to release
the auto-lock pins which
hold the front shroud in
its position.
2 Disconnect ElectricalConnector -- 1 From the CACP.
3
Remove / Keep Bolt BACB30LK3-3 4
Washer NAS1149D0332J 4
Remove Cabin Area
Control Panel
285W0012-3 or
285W0012-4
1
4
Remove / Keep Bolt BACB30LH3-( ) 4 (a)
Bracket 476W2112-3 2
5 Remove Rear ShroudAssembly 476W2111-1( ) 1
(a) Bolt length is different at each mounting location. Make sure the bolts are re-installed at the same
location.
(SHEET 2 OF 2)

### Page 35

FIGURE 2: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P101 - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 35 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 2: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P101 - GROUP 1 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure. Parts are
found in subkit 280W5112-102.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 End Cap 324484 1 Refer to BSWPM 20-30- 16.
2
Tie Wrap - Brown 280W5112-10201 -- Use as necessary to tie
wires to wire bundle
W1011. Refer to
BSWPM 20-10-11.
1410-20
1606-20
DISTRIBUTION INTEGRATION PANEL-DOOR 1P101
10
12
AP0421
AP0461
AP0461
D1300P
D1394P
D1301P
W6223
W6001
W6120
6
J
J
J
TB1011
TB1011
W1011
UA49
UB49
0012-20
2 1
W59579DELETED WIRE OR FORMER ROUTING
ADDED WIRE
EXISTING WIRE OR IMPACTED WIRE
(SHEET 1 OF 1)

### Page 36

FIGURE 3: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P101 - GROUP 2 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 36 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 3: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P101 - GROUP 2 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure. Parts are
found in subkit 280W5112-102.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 End Cap 324484 1 Refer to BSWPM 20-30- 16.
2
Tie Wrap - Brown 280W5112-10201 -- Use as necessary to tie
wires to wire bundle
W1011. Refer to
BSWPM 20-10-11.
TB1011
AP0461
AP0421
P101
0012-20
J
W6120
JD1396P
D1301P
W6223 6710-20 10
12
DISTRIBUTION INTEGRATION PANEL-DOOR 1
UA49
1
2
REFERENCE: 777 WIRING DIAGRAM 23-33-12
W1011
W44403
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 37

FIGURE 4: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P101 - GROUP 3 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 37 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 4: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P101 - GROUP 3 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure. Parts are
found in subkit 280W5112-102.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 End Cap 324484 1 Refer to BSWPM 20-30- 16.
2
Tie Wrap - Brown 280W5112-10201 -- Use as necessary to tie
wires to wire bundle
W1011. Refer to
BSWPM 20-10-11.
AP0461
AP0421
P101
0012-20
J
W6120
JD1394P
D1301P
W6223 1410-20 10
12
DISTRIBUTION INTEGRATION PANEL-DOOR 1
UA49
TB1011
1
2
REFERENCE: 777 WIRING DIAGRAM 23-33-12
W1011
W44401
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 38

FIGURE 5: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P102 - GROUPS 2, 3 AND 4
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 5: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P102 - GROUPS 2, 3 AND 4
DISTRIBUTION INTEGRATION PANEL-DOOR 2
TB1021
TB1021
UB49519-20W6002
D1342P
AP0971
19
P102
UA49
J
REFERENCE: 777 WIRING DIAGRAM 23-33-13
W1021
W59587
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 39

FIGURE 6: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P103 - GROUP 4 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 39 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 6: WIRE CHANGES - DISTRIBUTION INTEGRATION PANEL P103 - GROUP 4 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure. Parts are
found in subkit 280W5112-103 and 280W5112-105.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 End Cap 324484 1 Refer to BSWPM 20-30- 16.
2
Tie Wrap - Brown 280W5112-10503 -- Use as necessary to tie
wires to wire bundle
W1031. Refer to
BSWPM 20-10-11.
AP1701
P103
0022-20
J
W6121
JD1370P
D1353P
W6253 1727-20 27
22
DISTRIBUTION INTEGRATION PANEL-DOOR 3
UA49
TB1031
2
1
REFERENCE: 777 WIRING DIAGRAM 23-33-14
W1031
W59588
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 40

FIGURE 7: WIRE CHANGE - CACP 1 TO CCP - GROUPS 2 AND 3 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 40 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 7: WIRE CHANGE - CACP 1 TO CCP - GROUPS 2 AND 3 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
Parts are found in subkit 280W5112-104.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1
I.D. Tape 280W5112-10401 1 Use to replace existing
identification tape.
Text: D6625P M/W M23554
2
Tie Wrap - White 280W5112-10102 - Use as necessary to tie
wires to wire bundle W6087.
Refer to BSWPM 20-10-11.
CACP 1M23064
(J1)
FLIGHT CREW REST
D6625P
D6625P
CCPM23554
(J1)
REFERENCE: 777 WIRING DIAGRAM 23-33-12
2
1
W6087
W59589
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 41

FIGURE 8: WIRE CHANGE - CACP 2 TO CCP - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 41 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 8: WIRE CHANGE - CACP 2 TO CCP - GROUP 1 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
Parts are found in subkit 280W5112-101.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1
I.D. Tape 280W5112-10101 1 Use to replace existing
identification tape.
Text: D6600P M/W M23555
2
Tie Wrap - White 280W5112-10102 - Use as necessary to tie
wires to wire bundle W0479.
Refer to BSWPM 20-10-11.
CACP 2M23066
(J1)
CLOSET DOOR 2-LEFT
D6600P
D6600P
CCPM23555
(J1)
REFERENCE: 777 WIRING DIAGRAM 23-33-13
2
1
W479
W59593
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 42

FIGURE 9: WIRE CHANGE - PURSER STATION - GROUP 2 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 42 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 9: WIRE CHANGE - PURSER STATION - GROUP 2 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
Parts are found in subkit 280W5112-105
FLAG
NOTE NAME PART NUMBER QTY NOTES
1
I. D. Tape 280W5112-10501 1 Use to replace existing
identification tape.
Text: DM23555A M/W
M23555
2 Backshell(DM23555BT) 557B071NF530S 1 Refer to BSWPM 20-25-14.
3 Plug Connector(DM23555B) CDMA50P-K87 1
4 Contact M39029/64-369 4 Refer to BSWPM 20-90-11.
DM23673D
32
409RK-22
11
PURSER STATION
DM23555B
43
40
42
DM23555A
13
39
14
CACP 2M23066
(J1) DM23066A
CCPM23555
(J2)
409B -22
409BK-22
409R -22
CMTM23673
(J1)
REFERENCE: 777 WIRING DIAGRAMS 23-33-13, 23-36-41
(4 LOCATIONS)4
2 3
1
11
5 6 7 8 9
10
W6943
W59594
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 2)

### Page 43

FIGURE 9: WIRE CHANGE - PURSER STATION - GROUP 2 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 43 of 88
BOEING SERVICE BULLETIN 777-23-0142
5 Solder Sleeve withShield Ground BACS13CT3B 1 Refer to BSWPM 20-10-15.
6 Shield TerminatorBand BACB42F3 1 Refer to BSWPM 20-25-14 and Appendix B.
7 Shielding Tape,Scotch No. 24 280W5112-10505 - Refer to Appendix B.
8 Insulation Tape,Scotch No. 70 280W5112-10506 - Refer to Appendix B.
9 Insulation Tape,Permacel P-421 280W5112-10507 - Refer to Appendix B.
10 I. D. Tape 280W5112-10504 1 Text: DM23555B M/WM23555
11
Tie Wrap - Brown 280W5112-10503 - Use as necessary to tie
wires to wire bundle
W6943. Refer to
BSWPM 20-10-11.
FLAG
NOTE NAME PART NUMBER QTY NOTES
(SHEET 2 OF 2)

### Page 44

FIGURE 10: WIRE CHANGE - PURSER STATION - GROUP 4 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 44 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 10: WIRE CHANGE - PURSER STATION - GROUP 4 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
Parts are found in subkit 280W5112-105
FLAG
NOTE NAME PART NUMBER QTY NOTES
1
I. D. Tape 280W5112-10501 1 Use to replace existing
identification tape.
Text: DM23555A M/W
M23555
2 Backshell(DM23555BT) 557B071NF530S 1 Refer to BSWPM 20-25-14.
3 Plug Connector(DM23555B) CDMA50P-K87 1
4 Contact M39029/64-369 4
DM23673D
13
409RK-22
11
PURSER STATION
DM23555B
43
40
42
DM23555A
35
39
14
CACP 2M23066
(J1) DM23066A
CCPM23555
(J2)
409B -22
409BK-22
409R -22
CMTM23673
(J1)
REFERENCE: 777 WIRING DIAGRAMS 23-33-13, 23-36-41
(4 LOCATIONS)4
2 3
1
11
5 6 7 8 9
10
W6943
W59596
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 2)

### Page 45

FIGURE 10: WIRE CHANGE - PURSER STATION - GROUP 4 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 45 of 88
BOEING SERVICE BULLETIN 777-23-0142
5 Solder Sleeve withShield Ground BACS13CT3B 1 Refer to BSWPM 20-10-15.
6 Shield TerminatorBand BACB42F3 1 Refer to BSWPM 20-25-14 and Appendix B.
7 Shielding Tape,Scotch No. 24 280W5112-10505 - Refer to Appendix B.
8 Insulation Tape,Scotch No. 70 280W5112-10506 - Refer to Appendix B.
9 Insulation Tape,Permacel P-421 280W5112-10507 - Refer to Appendix B.
10 I. D. Tape 280W5112-10504 1 Text: DM23555B M/WM23555
11
Tie Wrap - Brown 280W5112-10503 - Use as necessary to tie
wires to wire bundle
W6943. Refer to
BSWPM 20-10-11.
FLAG
NOTE NAME PART NUMBER QTY NOTES
(SHEET 2 OF 2)

### Page 46

FIGURE 11: WIRE CHANGE - AP0715 TO LAVATORY 2F-1L - GROUP 3 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 11: WIRE CHANGE - AP0715 TO LAVATORY 2F-1L - GROUP 3 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
Parts are found in subkit 280W5112-107
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 Pin Contact BACC47CN1S 4 Refer to BSWPM 20-61-00.
2 I. D. Tape 280W5112-10701 1 Use to replace existing
identification tape.
Text: D06331P M/W AP0715
POS 01 (W6002)
3 Solder Sleeve
With Pigtail
BACS13CT5C 2 Maximum pigtail length is 2
inches. Refer to BSWPM 20-
10-15.
4 Plug Connector
(D01607P)
BACC63CB12-
12S6
1 Refer to BSWPM 20-35-11 and
20-61-11.
5 Backshell
(D06107PQ)
S280W603-302 1 Refer to BSWPM 20-25-14.
6 Socket Contact BACC47CP1S 4 Refer to BSWPM 20-61-00.
7 Shield Terminator
Band
BACB42F3 2 Refer to BSWPM 20-25-14.
8 I. D. Tape 280W5112-10703 1 Text: D06107P M/W VENDOR
9 Tie Wrap (White) 280W5112-10702 1 Use as necessary to tie wires
to wire bundle W6023. Refer
to BSWPM 20-10-11.
1
2
3
4
(J12)D6331PJ
(2F-1L)
11
7
10
D6107P
AP0715
W6023-402B-24
W6023-402R-24
W6023-402BK-24
W6023-402RK-24
LAVATORYM25049
6
REFERENCE: 777 WIRING DIAGRAM 23-36-41
5
3
7
1 6
8
4
2
9 (4 LOCATIONS)
(4 LOCATIONS)
3
7
W59598
ADDED WIRE OR NEW ROUTING
(SHEET 1 OF 1)

### Page 47

FIGURE 12: CCP INSTALLATION AS CSCP
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 12: CCP INSTALLATION AS CSCP
(EXAMPLE)
ATTENDANT STATION
FWD
SEE A (GROUP 1) SEE A (GROUPS 2, 3 AND 4)
A
BSEE
B8 4
6
2
7
2
2
1
(4 LOCATIONS)
3
(4 LOCATIONS)
4
5
3
W59599
(SHEET 1 OF 3)

### Page 48

FIGURE 12: CCP INSTALLATION AS CSCP
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 48 of 88
BOEING SERVICE BULLETIN 777-23-0142
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for the airplane. Parts are found in subkit 005W3210-
10 (Groups 1, 2, and 3) or 005W3210-11 (Group 4).
The CCP used as a CSCP is installed in a location used for a CACP before. The location of the CCP is shown
in the table below:
CAUTION: DO NOT TOUCH THE CONECTOR PINS OR OTHER CONDUCTORS ON THE CCP, DISK
DRIVE OR MASS MEMORY CARD. IF YOU TOUCH THESE CONDUCTORS,
ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE CCP, DISK DRIVE OR MASS
MEMORY CARD.
Group Location Monument CCP Equipment
Number
Group 1 Door 1 Left Lav 1F-2L M23554
Group 2 Door 2 Left Purser Station M23555
Group 3 Door 2 Left Lav 2F-1L M23555
Group 4 Door 2 Left Purser Station M23555
STEP TASK NAME PART NUMBER QTY NOTES
1 Install Rear Shroud Assembly 476W2111-5G (a)476W2111-5D (b) 1
2 Install / Kept Bracket 476W2112-3 2
Bolt BACB30LH3-( ) 4 (c)
3
Install Cabin Control
Panel
285W0863-6 1 Refer to AMM 777 23-
39-16/201.
Install / Kept Bolt BACB30LK3-3 4
Washer NAS1149D0332J 4
4 Remove Cover Plate 285W0904 2 From CCP .
5
Install Disk Drive 285W0895-1 1 Make sure the drive is
inserted fully before the
captive screws are
tightened. Refer to AMM
777 23-39-16/201.
6
Install Mass Memory
Card Assembly
(MMC 85)
285W0925-3 1 Make sure the card is
inserted fully before the
captive screws are
tightened. Refer to AMM
777 23-39-16/201.
7 Connect Electrical Connector -- 2 To the CCP.
(SHEET 2 OF 3)

### Page 49

FIGURE 12: CCP INSTALLATION AS CSCP
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 49 of 88
BOEING SERVICE BULLETIN 777-23-0142
8
Install Front Shroud
Assembly
476W2110-3G (a)
476W2110-3D (b)
1 Make sure the front
shroud and rear shroud
fit close together. Adjust
the auto-lock pins with a
1.5mm allen wrench if
necessary. Refer to
AMM 777 23-39-16/201.
( a )G r o u p s1 ,2 ,a n d3 .
(b) Group 4
(c) Bolt length is different at each mounting location. Make sure the bolts are installed at the same
location they were removed from.
STEP TASK NAME PART NUMBER QTY NOTES
(SHEET 3 OF 3)

### Page 50

FIGURE 13: CCP INSTALLATION AS CACP
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 50 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 13: CCP INSTALLATION AS CACP
(EXAMPLE)
ATTENDANT STATION
FWD
SEE A (GROUP 1)
SEE A (GROUPS 2, 3 AND 4)
A
BSEE
B
7 4
5
2
6
2
2
1
(4 LOCATIONS)
3(4 LOCATIONS)
3
SEE A (GROUPS 2 AND 3)
SEE A (GROUP 1)
SEE A (GROUP 4)
W59600
(SHEET 1 OF 3)

### Page 51

FIGURE 13: CCP INSTALLATION AS CACP
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 51 of 88
BOEING SERVICE BULLETIN 777-23-0142
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each CACP location. There are 2 CACP locations
on the airplane. Parts are found in subkit 005W3210-12 (Groups 1, 2, and 3) or 005W3210-13 (Group 4).
The locations of the CACP CCPs are shown in the table below:
CAUTION: DO NOT TOUCH THE CONECTOR PINS OR OTHER CONDUCTORS ON THE CCP OR MASS
MEMORY CARD. IF YOU TOUCH THESE CONDUCTORS, ELECTROSTATIC DISCHARGE
CAN CAUSE DAMAGE TO THE CCP OR MASS MEMORY CARD.
Group Location Monument CCP Equipment
Number
Group 1 Door 2 Left Closet 2 M23555
Door 4 Right Lav 4F-R M23557
Group 2 Door 1 Left Flight Crew Rest M23554
Door 4 Right Galley A3 M23557
Group 3 Door 1 Left Flight Crew Rest M23554
Door 4 Right Galley A3 M23557
Group 4 Door 1 Right Galley F3 M23554
Door 4 Right Galley A3 M23557
STEP TASK NAME PART NUMBER QTY NOTES
1 Install Rear Shroud Assembly 476W2111-4G (a)476W2111-4D (b) 1
2
Install / Kept Bracket 476W2112-3 2
Bolt BACB30LH3-( ) 4 (c)
3
Install Cabin Control
Panel
285W0863-6 1 Refer to AMM 777 23-
39-16/201.
Install / Kept Bolt BACB30LK3-3 4
Washer NAS1149D0332J 4
4 Remove Cover Plate 285W0904 1 From the CCP .
5
Install Mass Memory
Card Assembly
(MMC 20)
285W0896-2 1 Make sure the card is
inserted fully before the
captive screws are
tightened. Refer to AMM
777 23-39-16/201.
6 Connect Electrical Connector -- 1 To the CCP.
7
Install Front Shroud
Assembly
476W2110-2G (a)
476W2110-2D (b)
1 Make sure the front
shroud and rear shroud
fit close together. Adjust
the auto-lock pins with a
1.5mm allen wrench if
necessary. Refer to
AMM 777 23-39-16/201.
(SHEET 2 OF 3)

### Page 52

FIGURE 13: CCP INSTALLATION AS CACP
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 52 of 88
BOEING SERVICE BULLETIN 777-23-0142
(a) Groups 1, 2, and 3.
(b) Group 4
(c) Bolt length is different at each mounting location. Make sure the bolts are installed at the same
location they were removed from.
STEP TASK NAME PART NUMBER QTY NOTES
(SHEET 3 OF 3)

### Page 53

FIGURE 14: REMOVE CSCP - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 53 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 14: REMOVE CSCP - GROUP 1 AIRPLANES
(4 LOCATIONS)
AUTO-LOCK PIN
PURSER STATION
(8 LOCATIONS)A 2
1
1
2
3
SEE A
FWD
W59601
(SHEET 1 OF 2)

### Page 54

FIGURE 14: REMOVE CSCP - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 54 of 88
BOEING SERVICE BULLETIN 777-23-0142
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for the airplane.
STEP TASK NAME PART NUMBER QTY NOTES
1
Remove Bezel Assembly 476W2100-1G 1 Push a 1.5mm or smaller
allen wrench into the
auto-lock pin holes to
release the auto-lock
pins.
2 Remove / Keep Screw BACS12FA3K5 8
Close Out Panel 439W3217-264A 1
3
CAUTION: DO NOT TOUCH THE CONNECTOR PINS OR OTHER CONDUCTORS ON THE
CSCP . IF YOU TOUCH THESE CONDUCTORS, ELECTROSTATIC DISCHARGE CAN
CAUSE DAMAGE TO THE CSCP.
Remove Cabin System
Control Panel
(CSCP)
285W0011-4 or
285W0011-5
1 Refer to 777 AMM 20-
10-01/401.
(SHEET 2 OF 2)

### Page 55

FIGURE 15: WIRE CHANGE - PURSER STATION - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 55 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 15: WIRE CHANGE - PURSER STATION - GROUP 1 AIRPLANES
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure. Parts are
found in subkit 280W5112-105.
FLAG
NOTE NAME PART NUMBER QTY NOTES
1 End Cap 324484 7 Refer to BSWPM 20-10-11 and
20-30-16.
Coil and stow wire bundle at
last clamp point.
2 Tie Wrap (Brown) 280W5112-10503 -- Use as necessary. Refer to
BSWPM 20-10-11.
CSCP 1M23062
DM23062AA
DM23062AC
PURSER STATION
DM23062AC
DM23062AA
1
1
2
REFERENCE: 777 WIRING DIAGRAM 23-33-12
(3 LOCATIONS)
(4 LOCATIONS)
W6943
W59602
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
DELETED WIRE OR FORMER ROUTING
(SHEET 1 OF 1)

### Page 56

FIGURE 16: CLOSE OUT PANEL MODIFICATION - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 56 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 16: CLOSE OUT PANEL MODIFICATION - GROUP 1 AIRPLANES
A
A
13
4
(4 LOCATIONS) CLOSE OUT PANEL
REFERENCE ONLY)
(SHOWN FOR
COVER PLATE
A-A
(4 LOCATIONS) 32
11.5466
0.500.50
14.2540
W59613
(SHEET 1 OF 2)

### Page 57

FIGURE 16: CLOSE OUT PANEL MODIFICATION - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 57 of 88
BOEING SERVICE BULLETIN 777-23-0142
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for the airplane. Parts are found in subkit 439W1403-
1B.
STEP TASK NAME PART NUMBER QTY NOTES
1 Locate Close Out Panel 439W3217-264A 1 Previously removed from the
purser station.
2 Drill Hole -- 4 Drill 0.562 to 0.565 inch
diameter holes. Locate holes to
match the holes in the
439W3278-144B cover plate.
Refer to BAC 5583, Method B
Process Data provided in
Appendix A.
3 Install Inserts SL2334-3A3 4 Refer to BAC 5583, Method B
Process Data provided in
Appendix A.
Use Potting Compound BMS 5-28, Type
18, Class 2
--
4 Mark Close Out Panel -- 1 Mark the service bulletin
number on the non-decorative
surface of the close out panel.
Refer to BSOPM 20-50-10.
(SHEET 2 OF 2)

### Page 58

FIGURE 17: PURSER STATION MODIFICATION - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 58 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 17: PURSER STATION MODIFICATION - GROUP 1 AIRPLANES
PURSER STATION
(8 LOCATIONS)A 7
8
8
7
FWD
(4 LOCATIONS)
SEE B
SEE A
B
1
(2 LOCATIONS)
3
6
5
2
4 (8 LOCATIONS)(4 LOCATIONS)
W59615
(SHEET 1 OF 2)

### Page 59

FIGURE 17: PURSER STATION MODIFICATION - GROUP 1 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 59 of 88
BOEING SERVICE BULLETIN 777-23-0142
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for the airplane. Parts are found in subkit 439W1403-
1B.
STEP TASK NAME PART NUMBER QTY NOTES
1 Remove Screw NAS8203A9 2
Washer NAS1149D0332J 2
2 Loosen Captive Fastener -- 4
3 Remove Tray Assembly 476W0734-3 1
4 Remove Screw BACS12FA3K6 8
5 Remove Bracket Assembly 476W0733-1 1
6 Remove Placard BAC27WEL531 1 Text: M23062 CSCP
7I n s t a l l /
Modified
Close Out Panel 439W3217-264A 1
Install / Kept Screw BACS12FA3K5 8
8 Install Plate 439W3278-144B 1
Screw BACS12FA3K5 4
(SHEET 2 OF 2)

### Page 60

FIGURE 18: REMOVE CSCP - GROUP 2 AIRPLANES
November 25, 2003
777-23-0142
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 60 of 88
BOEING SERVICE BULLETIN 777-23-0142
FIGURE 18: REMOVE CSCP - GROUP 2 AIRPLANES
PURSER STATION
(4 LOCATIONS)
AUTO-LOCK PIN
SEE A
A
1
2
1
W59616
FWD
(SHEET 1 OF 2)

The text continues at https://openairdocs.org/service-documents/boeing/sb-777-23-0142/file/28e12a1a930a.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
