# Boeing Service Bulletin 777-23-0176: U.S. DOT/FAA - SB-777-23-0176-02--

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0544; AD 2014-16-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 777-23-0176](https://openairdocs.org/service-documents/boeing/sb-777-23-0176.md)
- Title as filed: U.S. DOT/FAA - SB-777-23-0176-02--
- Pages: 23
- PDF: https://openairdocs.org/files/sha256/f1/45/f145b82fd8eb7de2594cef8422cdacd37368069dbb7ff5bb8e8d3c9c5adf1633
- Page: https://openairdocs.org/service-documents/boeing/sb-777-23-0176/file/f145b82fd8eb

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 23
 
 
 
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0176
Date: January 09, 2003
Revision 2: October 26, 2006
ATA System: 2339
SUBJECT: COMMUNICATIONS - Cabin Management System (CMS) - Change the Operational 
Software
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2003 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10, 
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or 
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document 
or otherwise.

### Page 2

BLANK PAGE
January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
BLANK PAGE

### Page 3

Table of Contents
January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
Table of Contents
Revision Transmittal Sheet .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  10
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  10
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  12
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  12
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  13
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  13
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  13
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  15
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   15
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  16
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17

### Page 4

Table of Contents
January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
BLANK PAGE

### Page 5

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 23
 
 
 
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0176 Revision Transmittal Sheet
Date: January 09, 2003
Revision 2: October 26, 2006
ATA System: 2339
SUBJECT: COMMUNICATIONS - Cabin Management System (CMS) - Change the Operational 
Software
This Revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes that have accomplished the intent of Boeing 777-23-0141 Service 
Bulletin.
REASON FOR REVISION
This revision is sent to make Boeing 777-23-0141 Service Bulletin a prior requirement for Boeing 777-23-0176 
Service Bulletin. Accomplishing 777-23-0141 Service Bulletin ensures Cabin Management System (CMS)  
hardware and software compatibility.
These sections were changed:
1. In Summary/Concurrent Requirements, added Boeing Service Bulletin 777-23-0141.
2. In Planning Information, Paragraph 1.B., added Boeing service Bulletin 777-23-0141.
3. In Planning Information, Paragraph 1.C., added a list of the sections of the service bulletin that were 
changed.
4. In Planning Information, Paragraph 1.D., added Revision 2 information.
5. In Planning Information, Paragraph 1.J.1., added Boeing Service Bulletin 777-23-0141.
6. In Accomplishment Instructions, Paragraph 3.B.10.d., added steps to complete Configuration Database 
(CDB) changes and get the Buyer Furnished Equipment (BFE) files.
Paragraph 1.A., Effectivity, shows changes of airplane operators.  Each operator should examine the Effectivity 
paragraph for changes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location 
of important changes.
Pages with no vertical lines have no important changes.

### Page 6

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
REVISION HISTORY
Original Issue: January 9, 2003
Revision 1: March 11, 2004
Revision 2: October 26, 2006

### Page 7

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 23
 
 
 
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0176 Summary
Date: January 09, 2003
Revision 2: October 26, 2006
ATA System: 2339
SUBJECT: COMMUNICATIONS - Cabin Management System (CMS) - Change the Operational 
Software
CONCURRENT REQUIREMENTS
Boeing service bulletin 777-23-0010, is necessary to be accomplished prior to or concurrent with this service 
bulletin on the same airplanes.
Boeing service bulletin 777-23-0141, is necessary to be accomplished prior to this service bulletin.  
BACKGROUND
Boeing Service Related Problem (SRP) 777-SRP-24-0091 is related to this service bulletin.
The change described in this service bulletin will change the operation of cabin lighting system when the CABIN/
UTILITY switch is installed.
We have received numerous reports of smoke or flames in the passenger cabin related to the wiring for the 
passenger cabin in-flight entertainment system, cabin lighting and passenger seats.  It is not easy to remove 
the electrical power to these systems to stop the smoke and flames.
A CABIN/UTILITY switch can be installed to remove power to some systems in the passenger cabin.  This 
change to the cabin management system (CMS) operational software (OPS) will change the way various 
lighting systems operate when the switch is set to "OFF".
When the CABIN/UTILITY  switch is set to OFF, all night lights, reading lights and attendant work lights will come 
on.  Commands from the attendant switch panel for night light operation will be ignored.  A message will be 
shown on the cabin control panels which says "REDUCED POWER CONDITION - Fluorescent lights may be 
off.  Night lights are locked on".  This message replaces the Function Lock-Out - Reduced Power pop-up screen.
When the CABIN/UTILITY switch is set to ON, control of the cabin lighting systems by the cabin control panels 
is put back to normal and the REDUCED POWER CONDITION message is removed.
The cabin control panels will show the state of the CABIN/UTILITY switch on the Input Monitor - ARINC 629 Bus 
screen.

### Page 8

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
ACTION
Install a new OPS in the Cabin Area Control Panel (CACP), Zone Management Units (ZMU), Cabin System 
Management Unit (CSMU) and the Cabin System Control Panel (CSCP).  Make a change to the CMS 
configuration database (CDB).  Install the new database in the CMS components.
EFFECTIVITY
All 777 airplanes variable numbers WA002-WA017, WA076-WA080, WA086-WA093, WA116-WA119, WA131-
WA137, WA171-WA175, WA196-WA198, WA206-WA209, WA261-WA266, WB001-WB015, WB051-WB082, 
WB101-WB104, WB121-WB125, WB131-WB132. 
COMPLIANCE
No compliance time is given.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
MATERIAL INFORMATION
None.
Airplanes Total Task Hours Elapsed Hours
All 2.0 2.0

### Page 9

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 23
 
 
 
Commercial
Airplane
Group 777
Service Bulletin
Number: 777-23-0176
Date: January 09, 2003
Revision 2: October 26, 2006
ATA System: 2339
SUBJECT: COMMUNICATIONS - Cabin Management System (CMS) - Change the Operational 
Software
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-24W001 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.  An equivalent change is on subsequent 
production airplanes.  Refer to PRR 61887K for data about this change.
Airplane models:
777-200
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AIR INDIA  (AIN)
1 WA007 WB058–WB059 WB070
ALL NIPPON AIRWAYS  (ANA)
1 WA131–WA137
BOEING AIRCRAFT TRADING  (BTU)
1 WA079–WA080
BRITISH AIRWAYS  (BAB)
1 WA076–WA078 WB001–WB015
CHINA SOUTHERN AIRLINES  (GUN)
1 WA116–WA119 WB121–WB125
GROUP CONFIGURATION DESCRIPTION
1 - Airplanes with the Cabin Management System 
(CMS)

### Page 10

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
EMIRATES  (EAD)
1 WA196–WA198 WB101–WB104
JAL DOMESTIC  (JAS)
1 WA206–WA209
JAL INTERNATIONAL  (JAL)
1 WA171–WA175
KOREAN AIR  (KAL)
1 WB131–WB132
THAI AIRWAYS INTERNATIONAL  (TII)
1 WA086–WA093
UNITED AIRLINES  (UAL)
1 WA002–WA006 WA009–WA010 WA012–WA017 WA261–WA266
WB051–WB057 WB060–WB069 WB071 WB074–WB082
VARIG AIRLINES  (VAR)
1 WA008 WA011 WB072–WB073
IDENTIFICATION BY VARIABLE NUMBER
2. Spares Affected
None.
B. Concurrent Requirements
Boeing service bulletin 777-23-0010, is necessary to be accomplished prior to or concurrent with this 
service bulletin on the same airplanes.
Variable  Group
WA002–WA017 1
WA076–WA080 1
WA086–WA093 1
WA116–WA119 1
WA131–WA137 1
WA171–WA175 1
WA196–WA198 1
WA206–WA209 1
WA261–WA266 1
WB001–WB015 1
WB051–WB082 1
WB101–WB104 1
WB121–WB125 1
WB131–WB132 1

### Page 11

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
Boeing service bulletin 777-23-0141, is necessary to be accomplished prior to this service bulletin. 
C. Reason
Boeing Service Related Problem (SRP) 777-SRP-24-0091 is related to this service bulletin.
The change described in this service bulletin will change the operation of cabin lighting system when 
the CABIN/UTILITY switch is installed.
We have received numerous reports of smoke or flames in the passenger cabin related to the wiring 
for the passenger cabin in-flight entertainment system, cabin lighting and passenger seats.  It is not 
easy to remove the electrical power to these systems to stop the smoke and flames.
A CABIN/UTILITY switch can be installed to remove power to some systems in the passenger cabin.  
This change to the cabin management system (CMS) operational software (OPS) will change the way 
various lighting systems operate when the switch is set to "OFF".
When the CABIN/UTILITY  switch is set to OFF, all night lights, reading lights and attendant work lights 
will come on.  Commands from the attendant switch panel for night light operation will be ignored.  A 
message will be shown on the cabin control panels which says "REDUCED POWER CONDITION - 
Fluorescent lights may be off.  Night lights are locked on".  This message replaces the Function Lock-
Out - Reduced Power pop-up screen.
When the CABIN/UTILITY switch is set to ON, control of the cabin lighting systems by the cabin 
control panels is put back to normal and the REDUCED POWER CONDITION message is removed.
The cabin control panels will show the state of the CABIN/UTILITY switch on the Input Monitor - 
ARINC 629 Bus screen.
Revision 1 is issued to correct the reference to the Boeing Configuration Database Generator (CDG) 
User Manual from D634W602-1 to D634W601-1, Version 285W0304-6 or later.  The detailed 
instructions for changes to the cabin attendant work lights functions have also been changed.  Part 
(2) is added for airplanes with the ground service bus loss special function (in the CDB) but no crew 
rest area.  The necessary CDG software disk set 285W0304-6, with software 285W0347-06, is added 
to the Material Information data.
Revision 2  is sent to make Boeing 777-23-0141 Service Bulletin a prior requirement for Boeing 777-
23-0176 Service Bulletin. Accomplishing 777-23-0141 Service Bulletin ensures Cabin Management 
System (CMS)  hardware and software compatibility.
These sections were changed:
1. In Summary/Concurrent Requirements, added Boeing Service Bulletin 777-23-0141.
2. In Planning Information, Paragraph 1.B., added Boeing service Bulletin 777-23-0141.
3. In Planning Information, Paragraph 1.C., added Revision 2 information.
4. In Planning Information, Paragraph 1.D., added Revision 2 information.
5. In Planning Information, Paragraph 1.J.1., added Boeing Service Bulletin 777-23-0141.

### Page 12

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
6. In Accomplishment Instructions, Paragraph 3.B.10.d., added steps to complete Configuration 
Database (CDB) changes and get the Buyer Furnished Equipment (BFE) files.
D. Description
A new OPS is installed in the Cabin Area Control Panel (CACP), the Zone Management Units (ZMU), 
the Cabin System Management Unit (CSMU) and the Cabin System Control Panel (CSCP).  A change 
to the CMS configuration database (CDB) is made.  The new database is installed in the CMS 
components.
Revision 1 - No more work is necessary on airplanes changed as shown in the initial release of this 
service bulletin.  It is assumed that the changes were made correctly even though the wrong User 
Manual was referenced.
Revision 2 - No more work is necessary on airplanes that have accomplished the intent of Boeing 777-
23-0141 Service Bulletin. 
E. Compliance
No compliance time is given.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity.  This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this change for each airplane.  
This estimate is for direct labor only, done by an experienced crew.  Adjust the estimate with operator 
task-hour data if necessary.  The estimate does not include lost time.  These are some examples of 
lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Task
Number of 
Persons Task-Hours Elapsed Hours
Change 1 1.75 1.75
Test 1 0.25 0.25
TOTAL FOR EACH AIRPLANE 2.0 2.0

### Page 13

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR61887
b. Service Related Problem (SRP) 777-SRP-24-0091
c. 777 Airplane Maintenance Manual (AMM) 23-39-00
d. Boeing Service Bulletin 777-23-0141
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
L. Interchangeability and In termixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
Publication Chapter-Section
777 Maintenance Manual 23-39
777 Illustrated Parts Catalog 23-39
777 Flight Attendant Manual 2A.60, 3.10

### Page 14

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
BLANK PAGE

### Page 15

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
Part Number / 
Specification QTY Name Notes
285W0283-4 1 Disk Set (a)
285W0292-4 1 Disk set (b)
285W0295-7 1 Disk Set (c)
285W0298-6 1 Disk Set (d)
285W0304-6 1 Disk Set (e)
(a)  Disk Set with ZMU OPS 2378-BCE-018-04
(b)  Disk Set with CSMU OPS 2372-BCE-012-04
(c)  Disk Set with CSCP OPS 2372-BCE-011-07
(d)  Disk Set with CACP OPS 231A-BCE-00Y-06
(e)  Disk Set with CDG software 285W0347-06.
NOTE:  This software is for the configuration database generator (CDG) tool and is not 
installed on the airplane.

### Page 16

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin.  But, 
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be 
necessary.  Examine operator tool supply to make sure all necessary tools are available.

### Page 17

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE:
1. Use sufficient precautions to make sure that system components, airplane electrical 
wires and structures, are not damaged by drills, metal shavings and other contamination 
while you do work.  Metal shavings or contamination left in the airplane can touch wire 
bundles and cause chafing damage to electrical wires.  Chafed electrical wires can 
cause arcing damage.
2. Manual titles are referred to by acronyms.  Refer to Paragraph 1.J., References, for 
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. The Configuration Database Generator (CDG) is a ground support engineering software 
tool that is hosted on a personal computer (PC) and used to build the Configuration 
Database (CDB) media sets for individual airplanes.
B. WORK INSTRUCTIONS
1. At the CSCP, remove the CSCP core partition (CP) software, the CACP OPS, the ZMU OPS and 
the CSMU OPS.  Refer to the 777 AMM 23-39-00, Operational Program Software Removal from 
the CSCP Mass Storage. 
2. Do a phase I installation of the CSCP-CP software 2372-BCE-011-07.  Use the disk set 
285W0295-7.  Refer to the 777 AMM 23-39-00, Phase I Data Installation from the CSCP Disk 
Drive to the CSCP Mass Storage.
3. Do a phase I installation of the CACP OPS software 231A-BCE-00Y-06.  Use the disk set 
285W0298-6.  Refer to the 777 AMM 23-39-00, Phase I Data Installation from the CSCP Disk 
Drive to the CSCP Mass Storage.
4. Do a phase I installation of the ZMU OPS software 2378-BCE-018-04.  Use the disk set 
285W0283-4.  Refer to the 777 AMM 23-39-00, Phase I Data Installation from the CSCP Disk 
Drive to the CSCP Mass Storage.
5. Do a phase I installation of the CSMU OPS software 2372-BCE-012-04.  Use the disk set 
285W0292-4.  Refer to the 777 AMM 23-39-00, Phase I Data Installation from the CSCP Disk 
Drive to the CSCP Mass Storage.
6. Do a phase II installation of the new CSCP-CP software part number 2372-BCE-011-07.  Refer 
to the 777 AMM 23-39-00, Operational Program Software Installation (Phase II). 
7. Do a phase II installation of the new CACP OPS software part number 231A-BCE-00Y-06.  Refer 
to the 777 AMM 23-39-00, Operational Program Software Installation (Phase II). 
8. Do a phase II installation of the new ZMU OPS software part number 2378-BCE-018-04.  Refer 
to the 777 AMM 777 AMM 23-39-00, Operational Program Software Installation (Phase II).

### Page 18

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
9. Do a phase II installation of the new CSMU OPS software part number 2372-BCE-012-04.  Refer 
to the 777 AMM 23-39-00, Operational Program Software Installation (Phase II). 
10. Do a phase I installation of the new configuration database.  Refer to the 777 AMM 23-39-00, 
Phase I Data Installation From the CSCP Disk Drive to the CSCP Mass Storage.  To get the new 
database, do these steps:
NOTE: Refer to the Boeing Configuration Database Generator (CDG) User Manual D634W601-
1, Version 285W0304-6 or later.
a. Get ready to make a change to the configuration database (CDB).
(1) If not installed, install the CDG software tool 285W0347-06 (on disk set 285W0304-6).
(2) Load the serviceable database file.
(3) Open the database file.
(4) Do a consistency check.  Make the menu selections "Utilities - Check Consistency".
(5) When the check is completed, make the menu selection "Print".  Keep the printed data 
to use in a subsequent step.
(6) Make the menu selections "Utilities - Generate reports".
(7) Put a check mark in the box for "Special Functions" (Section 16).  Make the selection 
"Accept".
(8) When the report is completed, make the selections "Print" and then "Exit".  Keep the 
printed data to use in a subsequent step.
(9) Make the menu selections "File - Save as".  Make a new name for the database and 
save the file.
NOTE: The use of the characters “CDB” (i.e. “mmm” code) in the software part
number is exclusively reserved for Boeing generated CMS database software.
Boeing recommends the use of the customer three letter manufacturing
designator.
b. Change the cabin attendant work lights functions in the CDB
(1) Make the menu selections "Data - Attendant Work Lights"
(2) See the printed data made before and find all the attendant work lights in the Special 
Functions part.
(3) For each attendant work light found, write the same OEU data (Input, Output and 
Location Description).
(4) Accept the screen when done.
(5) Make the menu selections "Data-Special Functions".

### Page 19

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
(6) Remove the attendant work lights from the special functions by removing the check 
mark in the In-Config box.
(7) Accept the screen when done.
(8) Make the menu selections "File-Save".
c. Create the Cabin Utility Switch function.
(1) Make the menu selections "Data - Special Functions".  If no crew rest area is installed, 
and the special function "Ground service bus loss" is not found, go to the step to check 
the database and make the data load disks.  For these airplanes it is not necessary to 
create the Cabin Utility Switch function.
(2) If no crew rest area is installed, and the special function "Ground service bus loss" is 
found, do these steps.
(a) Make the menu selections "Data - Special Functions".
(b) Find the special function that has "Ground service bus loss" as the input type 
(usually Special Function number 62).  Use the printed data made before to find 
the special function number.
(c) Go to the special function number 79 and put an X in the "In-Config" box.  If this 
special function number is already used, find a special function number that is not 
used and is higher than the one for the Ground service bus loss entry.
(d) Make a click on the "Input Type" box.  From the pull down menu, make the 
selection "CMS Discrete/Signal".
(e) Make a click on the "CMS Discrete/Signal" box, then make the selection "Cabin 
Utlity Switch". 
(f) Make the selection "Close".
(g) Make a click on the "Description" button and write the description in the box.  The 
description could be the same as the description of ground service bus loss 
(GSBL).  You can change the words "Ground Service Buss Loss" to "Cabin Utility 
Switch".  Make the selection "CLOSE".
(h) Make a selection "Output Type 2", then "Edit - Insert Record".
(i) For each Ground Service Bus Loss special function entry, write the same data to 
the cabin utility switch special function.  Use the printed data made before to get 
the Output Type data.
NOTE: The CMS Special Functions can have only ten outputs.
(j) Make the selection "Accept". 
(k) Make the menu selections "File - Save" and go to the step to check the database 
and make the data load disks.

### Page 20

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
(3) If a crew rest area is installed, and the special function "Ground service bus loss" is not 
found, do these steps.
(a) See the printed data made before and find all the reading lights for the crew rest 
areas not controlled by a PCU (passenger control unit).  If no crew rest reading 
lights are found, no more changes to the database are necessary (go to the step 
to check the database and make the data load disks).
(b) Go to the special function number 79 and put an X in the "In-Config" box.  If this 
special function number is already used, find a special function number that is not 
used.
(c) Make a click on the input type box.  From the pull down menu, make the selection 
"CMS Discrete/Signal".
(d) Make a click in the CMS Discrete/Signal box, then make a selection "Cabin Utility 
Switch".
(e) Make the selection "CLOSE".
(f) Make a click on the "Description" button and write the description in the box.  The 
description could be a text mixed from the description of ground service bus loss 
(GSBL) and the crew rest reading light special function.  You can change the 
words "Ground Service Buss Loss" to "Cabin Utility Switch".  Make the selection 
"CLOSE".
(g) Make a selection "Output Type 2", then "Edit - Insert Record".
(h) For each crew rest  reading light found, write the same Output Type data to the 
cabin utility switch special function.  Use the printed data made before to get the 
Output Type data.
(i) For each crew rest reading light, make the Initial/Inactive setting "NULL" and the 
Active setting "ON".   Make the selection "Close" to get to the Special Functions 
screen.
NOTE: The CMS Special Functions have only ten outputs.  If more than one crew
rest area is installed, it is necessary to input at least one light from each
crew rest area.  It is recommended that for the flight crew rest area, only
one light is necessary. 
(j) Make the selection "Accept".
(k) Make the menu selections "File - Save" and go to the step to check the database 
and make the data load disks.
(4) If a crew rest area is installed, and the special function "Ground service bus loss" is 
found, do these steps
(a) Make the menu selections "Data - Special Functions".

### Page 21

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
(b) Find the special function that has "Ground service bus loss" as the input type 
(usually Special Function number 62).  Use the printed data made before to find 
the special function number.
(c) Go to the special function number 79 and put an X in the "In-Config" box.  If this 
special function number is already used, find a special function number that is not 
used and is higher than the one for the Ground service bus loss entry.
(d) Make a click on the "Input Type" box.  From the pull down menu, make the 
selection "CMS Discrete/Signal".
(e) Make a click on the "CMS Discrete/Signal" box, then make the selection "Cabin 
Utlity Switch". 
(f) Make the selection "Close".
(g) Make a click on the "Description" button and write the description in the box.  The 
description could be a text mixed from the description of ground service bus loss 
(GSBL) and the crew rest reading light special function.  You can change the 
words "Ground Service Buss Loss" to "Cabin Utility Switch".  If there is no crew 
rest reading light special function, use the GSBL description only.  Make the 
selection "CLOSE".
(h) Make a selection "Output Type 2", then "Edit - Insert Record".
(i) For each Ground Service Bus Loss special function entry, write the same data to 
the cabin utility switch special function.  Use the printed data made before to get 
the Output Type data.
NOTE: The CMS Special Functions can have only ten outputs.
(j) See the printed data made before and find all the Crew Rest reading lights.  If no 
crew rest reading lights are found, no more changes to the database are 
necessary (go to the step to check the database and make the data load disks).
(k) For each crew rest reading light special function entry, write the same data to the 
cabin utility switch special function.
NOTE: The CMS Special Functions have only ten outputs.  If more than one crew
rest area is installed, it is necessary to input at least one light from each
crew rest area.  It is recommended that for the flight crew rest area, only
one light is necessary. 
(l) For each crew rest reading light, make the Initial/Inactive setting "NULL" and the 
Active setting "ON".   Make the selection "Close" to get to the Special Functions 
screen.
(m) Make the selection "Accept". 
(n) Make the menu selections "File - Save" and go to the step to check the database 
and make the data load disks.
d. Do a check of the database and make the data load disks for the new CDB.

### Page 22

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
(1) Complete CDB changes.
(2) Do a consistency check.  Make the menu selections "Utilities - Check Consistency".  
Remove any critical errors.
(3) Optional - It can be a help to examine the warnings before and after the database 
changes.  A differences report can also give more information.  Refer to the CDG Users 
Manual D634W601-1 to get the necessary instructions to make these reports.
(4) Get the Buyer Furnished Equipment (BFE) files for the Passenger Entertainment 
System from the supplier for data-load process.
(5) Make Data Load disk set with BFE files. Make the menu selections "Utilities - Create 
Data Load disk".  Use an operator selected diskette set part number and make the 
selection "Accept".
NOTE: Do not use the characters "222W0014-" in the diskette set part number.
These characters are to be used only for Boeing made database disk sets. 
(6) When told, put the first blank disk in the drive a: and make the selection "OK".
NOTE: Use only new or reformatted High Density 1.44 Mb disks.  Errors can occur if
the disk is not reformatted before use.
(7) When told, remove the disk.  Read the instructions to make a label for the removed 
disk.
(8) When told, put the second blank disk in the drive a: and make the selection "OK".
(9) When told, remove the disk.  Read the instructions to make a label for the removed 
disk.
11. Install the new configuration database to the CMS LRUs.  Refer to the 777 AMM 23-39-00, 
Configuration Database Installation, to get the necessary procedures. 
12. Do a check of the CSMU, CACP and ZMU software part numbers.  Refer to the 777 AMM 
23-39-00, Operational Program Software and Configuration Database Verification test.
13. At each door, push the WORK LIGHT switch to the ON position.  See that the attendant work 
lights come on.
14. Push the WORK LIGHT switches again and see that all the lights are off.
15. At the cabin system control panel (CSCP), get to the cabin maintenance menus.  Make the 
selection CABIN TESTS.  When the screen changes, make the selection LAMP TESTS.  When 
the screen changes make the selection for the ATTENDANT WORK menu option to ON.  See 
that all the attendant work lights come on.
NOTE: If any lights do not come on in this step, it is possible they were not moved from the
Special Function part of the Configuration Database.
16. Make the selection for the ATTENDANT WORK menu option to OFF and see that all the lights 
are off.

### Page 23

January 09, 2003
Revision 2:  October 26, 2006 777-23-0176
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 23
BOEING SERVICE BULLETIN 777-23-0176
 
 
17. Put the airplane back to a serviceable condition.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
