# Boeing Special Attention Service Bulletin 777-25-0482: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-1257; AD 2012-12-19 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 777-25-0482](https://openairdocs.org/service-documents/boeing/sb-777-25-0482.md)
- Title as filed: U.S. DOT/FAA - Service Information
- Pages: 61
- PDF: https://openairdocs.org/files/sha256/ce/b5/ceb5915cf4b43254fe55736b54db51b1c2753b7d958627e99aa9c52fe13b1e09
- Page: https://openairdocs.org/service-documents/boeing/sb-777-25-0482/file/ceb5915cf4b4

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-25-0482
Original Issue: February 24, 2011
Revision 1: February 21, 2012
ATA System: 2521 5313
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Lowered Ceiling Panel -
Section 41 - Overhead Space Utilization (OSU) Ceiling - Change To Strengthen Support
Structure
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
1 of 61
3.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
2 of 61
BOEING SERVICE BULLETIN 777-25-0482
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 3
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 3
D. Description .............................................. 1 3
E. Compliance .............................................. 1 4
F. Approval ............................................... 1 4
G. Manpower .............................................. 1 4
H. Weight and Balance Changes .................................... 1 5
I. Electrical Load Data ......................................... 1 6
J. References .............................................. 1 6
1. Existing Data .......................................... 1 6
2. Data supplied with this Service Bulletin ............................ 1 6
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 6
K. Publications Affected ........................................ 1 6
L. Interchangeability and Intermixability of Parts ........................... 1 7
2. MATERIAL INFORMATION ........................................ 1 9
A. Material - Price and Availability ................................... 1 9
B. Industry Support Information .................................... 2 0
C. Parts Necessary For Each Airplane ................................. 2 0
1. Kits/Parts ............................................ 2 0
2. Parts and Materials Supplied by the Operator ........................ 2 4
3. Parts Modified and Reidentified ................................ 2 4
4. Parts Removed and Not Replaced .............................. 2 4
D. Parts Necessary to Change Spares ................................. 2 5
E. Special Tooling - Price and Availability ............................... 2 5
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 5
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7
A. GENERAL INFORMATION ..................................... 2 7
B. WORK INSTRUCTIONS ....................................... 2 8
FIGURE 1: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL .......... 3 0
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION ....... 3 3
FIGURE 3: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION [Group 1] ......... 4 0
FIGURE 4: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION [Group 2] ......... 4 3
FIGURE 5: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL ......... 4 6
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION ....... 4 9
FIGURE 7: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION [Group 1] ......... 5 6
FIGURE 8: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION [Group 2] ......... 5 9
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
3 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
4 of 61
BOEING SERVICE BULLETIN 777-25-0482
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 777-25-0482Original Issue: February 24, 2011
Revision 1: February 21, 2012
ATA System: 2521 5313
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Lowered Ceiling Panel -
Section 41 - Overhead Space Utilization (OSU) Ceiling - Change To Strengthen Support
Structure
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed in accordance with the original issue of this service bulletin.
REASON FOR REVISION
This revision is sent to incorporate changes found during the validation of this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane WD796 by Service
Bulletin 777-25-0482 Original Issue before the release of Revision 01 of this service bulletin. The change
completed on airplane WD796 by Service Bulletin 777-25-0482 Original Issue is equivalent to the release of
Revision 01of this service bulletin. Airplane WD796 has the configuration of a Group 2 airplane.
These sections are changed:
1. Summary - Background - Validation statement added.
2. Summary - Manpower - Time for access and restoring access added.
3. Paragraph 1.C., Reason - Validation statement added.
4. Paragraph 1.G., Manpower - Time for access and restoring access added.
5. Paragraph 1.J.1, Existing Data - Standard Wiring Practices Manual (SWPM) and 777 Aircraft Maintenance
Manual (AMM) references added.
6. Paragraph 2.C.1., Kits/Parts - Changed part number for 1 bolt.
7. Paragraph 3.A., General Information - Current general notes added.
8. Paragraph 3.B., Work Instructions - Instruction for Access and Restoring Access added.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
5 of 61

### Page 6

9. Figures 3, and 4:
a. Changed part number for 1 bolt in Step Table.
b. Added information to relocate ground if required.
10. Figure 6:
a. Instruction is added to the Step Table regarding a possibly blocked ceiling panel insert.
11. Figures 7, and 8:
a. Changed part number for 1 bolt in Step Table.
b. Added information to relocate ground if required.
c. In Step 1 and Step 3 of Step Tables, changed More Data for Bushing to Far Side from Near Side.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
February 24, 2011Original Issue:
February 21, 2012Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
6 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 7

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 777-25-0482Original Issue: February 24, 2011
Revision 1: February 21, 2012
ATA System: 2521 5313
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Lowered Ceiling Panel -
Section 41 - Overhead Space Utilization (OSU) Ceiling - Change To Strengthen Support
Structure
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin provides instructions and a kit of parts to strengthen the structure which supports the forward
lowered ceiling panels for some 777 model airplanes. If you do not do this service bulletin and a 9G forward
load condition occurs, the forward lowered ceiling panels and support structure could become dislodged and
injure personnel or interfere with emergency evacuation.
The possibility of a 9G forward load when landing is small. No operator has reported dislodged ceiling panels
from such a load. The support structure was found to be under strength during the design review of a new section
41 lowered ceiling configuration.
Only airplanes incorporating the Overhead Space Utilization (OSU) option would have under strength structure.
The OSU option includes overhead stowage boxes in the ceiling inboard of left and right door 1. The under
strength area supports lowered ceiling panels immediately aft of these overhead stowage boxes. This service
bulletin provides for increasing strength by installing thicker structure and an additional load path on each side.
Boeing Service Related Problem (SRP) 777-SRP-25-0289 is related to this service bulletin. This SRP is described
in Fleet Team Digest Article 777 FTD 25-09010.
As a part of a service bulletin validation program, this change was completed on airplane WD796 by Service
Bulletin 777-25-0482 Original Issue before the release of Revision 01 of this service bulletin. The change
completed on airplane WD796 by Service Bulletin 777-25-0482 Original Issue is equivalent to the release of
Revision 01of this service bulletin. Airplane WD796 has the configuration of a Group 2 airplane.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
7 of 61

### Page 8

ACTION (PRR 62224)
In the forward lowered ceiling area, remove the forward overhead stowage bin modules and adjacent aft ceiling
panel to expose the support structure for the lowered ceiling panels in section 41. Disconnect a tie rod and
remove two C-channels and related brackets from both left and right side ceiling panel support structure. Install
new support channel assemblies composed of C-channels having thicker cross sections. The new assemblies
also include fittings for attaching two tie rods in place of fittings for attaching one tie rod. Add a new load path
on each side by adding new fittings to the rails above the changed structure and adding new tie rods between
the fittings on new support structure and the new fittings on the rails above. If a ground stud occupies a hole
required for the new fitting, relocate the ground to an adjacent hole. Reconnect the existing tie rods.
EFFECTIVITY
777-200, -200LR and -300ER airplanes incorporating Overhead Space Utilization (OSU) option. Refer to
Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the changes given in this service bulletin be done within 5 years after the original issue
date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of January 16, 2008. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
12.0022.50All
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
8 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 9 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
STA
248
STA
445
O
INSTALL ADDITIONAL TIE ROD
ATTACH FITTING ON UPPER RAIL
INSTALL ADDITIONAL TIE ROD
REMOVE T-MEMBER WITH SINGLE
TIE ROD ATTACH FITTING. INSTALL
STRONGER T-MEMBER WITH
DOUBLE TIE ROD ATTACH FITTING.
(LEFT SIDE SHOWN, RIGHT SIDE SIMILAR)
1974859
Original Issue: February 24, 2011
Revision 1: February 21, 2012  777-25-0482
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  9 of 61

### Page 10

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
10 of 61
BOEING SERVICE BULLETIN 777-25-0482
BLANK PAGE

### Page 11

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-25-0482
Original Issue: February 24, 2011
Revision 1: February 21, 2012
ATA System: 2521 5313
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Lowered Ceiling Panel -
Section 41 - Overhead Space Utilization (OSU) Ceiling - Change To Strengthen Support
Structure
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 62224 for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
777-200 and 777-300ER Airplanes with Overhead Space Utilization
(OSU) Option and line number from 423 through 494.
-1
777-200, 777-200LR, and 777-300ER Airplanes with Overhead Space
Utilization (OSU) Option and line number from 497 through 751.
-2
Airplane Models:
777-200, 777-200LR, 777-300ER
GroupVariable Number
2WC221 - WC222
1WC301 - WC306
2WC307 - WC308
1WC381 - WC388
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
11 of 61

### Page 12

GroupVariable Number
2WC389 - WC395
2WC486 - WC493
2WC506 - WC508
2WC531 - WC536
2WC546 - WC548
2WC556
2WC566 - WC567
2WD001 - WD002
2WD011 - WD015
2WD031 - WD036
2WD066 - WD067
1WD501 - WD502
2WD503 - WD510
1WD521 - WD526
2WD527 - WD539
2WD546 - WD552
1WD561
2WD562 - WD573
2WD581 - WD591
2WD606 - WD609
2WD621 - WD632
2WD651 - WD661
2WD671 - WD675
2WD741 - WD750
2WD761 - WD770
2WD786 - WD788
2WD796 - WD804
2WD826 - WD830
2WD871 - WD875
2WD911 - WD912
2WD936 - WD939
2WD966
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
12 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 13

2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin provides instructions and a kit of parts to strengthen the structure which supports
the forward lowered ceiling panels for some 777 model airplanes. If you do not do this service bulletin
and a 9G forward load condition occurs, the forward lowered ceiling panels and support structure could
become dislodged and injure personnel or interfere with emergency evacuation.
The possibility of a 9G forward load when landing is small. No operator has reported dislodged ceiling
panels from such a load. The support structure was found to be under strength during the design review
of a new section 41 lowered ceiling configuration.
Only airplanes incorporating the Overhead Space Utilization (OSU) option would have under strength
structure. The OSU option includes overhead stowage boxes in the ceiling inboard of left and right door
1. The under strength area supports lowered ceiling panels immediately aft of these overhead stowage
boxes. This service bulletin provides for increasing strength by installing thicker structure and an
additional load path on each side.
Boeing Service Related Problem (SRP) 777-SRP-25-0289 is related to this service bulletin. This SRP
is described in Fleet Team Digest Article 777-FTD-25-09010.
Revision 01 is sent to make changes found to be required during validation of the service bulletin.
Changes include adding access instructions, reducing the grip length of a bolt, relocating a ground
stud if required, and installing a bushing far side instead of near side.
As a part of a service bulletin validation program, this change was completed on airplane WD796 by
Service Bulletin 777-25-0482 Original Issue before the release of Revision 01 of this service bulletin.
The change completed on airplane WD796 by Service Bulletin 777-25-0482 Original Issue is equivalent
to the release of Revision 01of this service bulletin. Airplane WD796 has the configuration of a Group
2 airplane.
The data given in Information Notice 777-25-0482 IN 01 is included in this revision.
D. Description
In the forward lowered ceiling area, remove the forward overhead stowage bin modules and adjacent
aft ceiling panel to expose the support structure for the lowered ceiling panels in section 41. Disconnect
a tie rod and remove two C-channels and related brackets from both left and right side ceiling panel
support structure. Install new support channel assemblies composed of C-channels having thicker
cross sections. The new assemblies also include fittings for attaching two tie rods in place of fittings
for attaching one tie rod. Add a new load path on each side by adding new fittings to the rails above
the changed structure and adding new tie rods between the fittings on new support structure and the
new fittings on the rails above. If a ground stud occupies a hole required for the new fitting, relocate
the ground stud to an adjacent hole. Reconnect the existing tie rods.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
13 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 14

Airplanes are divided into two groups because of a difference in the width of the new tie rod fitting and
the lattice rail to which the fitting is attached. The work is the same for both groups.
Revision 1 - No more work is necessary on airplanes changed in accordance with the original issue of
this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
221, 222, 223, 224777-200, 777-300ER
Group 2:
Affected Maintenance Zones
ZoneModel
221, 222, 223, 224777-200, 777-200LR, 777-
300ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the changes given in this service bulletin be done within 5 years after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
14 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 15

 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Elapsed HoursTask HoursNumber of PersonsTask
1.002.002Open Access
1.252.502Figure 1
3.006.002Figure 2
0.750.751Figure 3
1.252.502Figure 5
3.006.002Figure 6
0.750.751Figure 7
1.002.002Close Access
12.0022.50TOTAL FOR EACH AIRPLANE
Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
1.002.002Open Access
1.252.502Figure 1
3.006.002Figure 2
0.750.751Figure 4
1.252.502Figure 5
3.006.002Figure 6
0.750.751Figure 8
1.002.002Close Access
12.0022.50TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+2053.3+5.3777-200
+940.2+5.3777-300
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
15 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 16

I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 62224
b. Standard Wiring Practices Manual (SWPM) 20-20-10
c. 777 Aircraft Maintenance Manual (AMM) 25-21-07, 25-28-07
d. 777 Fleet Team Digest (FTD) 25-09010
e. Service Related Problem (SRP) 777-SRP-25-0289
f. 777-200 Structural Repair Manual (SRM) 51-20-01, 51-20-10, 51-40-08
g. 777-300 Structural Repair Manual (SRM) 51-20-01, 51-20-10, 51-40-08
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
TIE ROD INSTL-LOWERED CEILING413W1200
SUPPORT STRUCTURE INSTL - LOWERED CEILING, DOOR 1413W1201
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
53-13777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
16 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 17

L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
17 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 18

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
18 of 61
BOEING SERVICE BULLETIN 777-25-0482
BLANK PAGE

### Page 19

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$13,329.005141October 13,
2011
TOP KIT - REWORK
OF OSU TYPE SEC-
TION 41 LOWERED
CEILING SUPPORT
STRUCTURE, GROUP
1
005W3441-1
$13,329.005146February 10,
2012
TOP KIT - REWORK
OF OSU TYPE SEC-
TION 41 LOWERED
CEILING SUPPORT
STRUCTURE, GROUP
1
005W3441-1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
19 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 20

Group 2:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$13,329.0051425October 13,
2011
TOP KIT - REWORK
OF OSU TYPE SEC-
TION 41 LOWERED
CEILING SUPPORT
STRUCTURE, GROUP
1
005W3441-2
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of January 16, 2008. For task
hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable numbers in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
Figure Kit
876432Top Kit
-11-11005W3441-1
1-11-1005W3441-2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
20 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 21

Group 1:
KIT 005W3441-1
NOTES
Existing Part
NumberName
Figure
New Part Number
7632
QTY
(a),(b)413W1221-105B
AND 413W1221-
113B AND
413W1221-35B
AND 413W1221-7
SUPPORT
STRUCTURE AS-
SY - LOWERED
CEILING, SECT 41
1413W1210-105B
(a),(b)413W1221-106B
AND 413W1221-
113B AND
413W1221-35 AND
413W1221-7
SUPPORT
STRUCTURE AS-
SY - LOWERED
CEILING, SECT 41
1413W1210-106B
(a),(b)413W1221-55BGUSSET22413W1221-246B
(a),(b)413W1221-31BGUSSET11413W1221-269B
(a),(b)413W1221-33BGUSSET11413W1221-270B
(a),(b)413W1221-35BANGLE11413W1221-271B
(a),(b)413W1221-60BCORNER BRACK-
ET
11413W1221-272B
(a),(b)413W1221-60BCORNER BRACK-
ET
11413W1221-273B
MISCELLANEOUS
- MACHINE PART
11422W2165-111
TIE ROD ASSY11777081-178
BUSHING22BACB28AK04-024
BUSHING11BACB28AK04-038
(c)BOLT22BACB30NR4K15
(c)BOLT, HEX HEAD11BACB30NR4K17
(c)BOLT, PROTRUD-
ING HD
88BACB30NX5HK3
(c)BOLT44BACB30VF3K5
(c)BOLT, 100 DEG
HEX DR
1212BACB30YP5K4
COLLAR,
PRELOAD
1010BACC30BH5
COLLAR, SHEAR1212BACC30BL5
NUT33BACN10YR4CD
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
21 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 22

Group 1:
KIT 005W3441-1
NOTES
Existing Part
NumberName
Figure
New Part Number
7632
QTY
(c)RIVET55BACR15BB4D6C
(c)RIVET, UNIVER-
SAL HD
1312BACR15FT5D6C
(c)RIVET, UNIVER-
SAL HD
1010BACR15FT5D7C
(c)RIVET55BACR15GF4D6
SHIM, LAMINAT-
ED
11BACS40R009D024F
WASHER33BACW10BP4CD
WASHER33BACW10BP4DP
(a) Discard the existing part.
(b) You cannot use the existing part to replace the new or changed part.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip
length longer than indicated.
Group 2:
KIT 005W3441-2
NOTES
Existing Part
NumberName
Figure
New Part Number
8642
QTY
(a), (b)413W1221-105B
AND 413W1221-
113B AND
413W1221-35 AND
413W1221-7
SUPPORT
STRUCTURE AS-
SY - LOWERED
CEILING, SECT 41
1413W1210-105B
(a), (b)413W1221-106B
AND 413W1221-
113B AND
413W1221-35 AND
413W1221-7
SUPPORT
STRUCTURE AS-
SY - LOWERED
CEILING, SECT 41
1413W1210-106B
(a), (b)413W1221-55BGUSSET22413W1221-246B
(a), (b)413W1221-31BGUSSET11413W1221-269B
(a), (b)413W1221-33BGUSSET11413W1221-270B
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
22 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 23

Group 2:
KIT 005W3441-2
NOTES
Existing Part
NumberName
Figure
New Part Number
8642
QTY
(a), (b)413W1221-35BANGLE11413W1221-271B
(a), (b)413W1221-60BCORNER BRACK-
ET
11413W1221-272B
(a), (b)CORNER BRACK-
ET
11413W1221-273B
MISCELLANEOUS
- MACHINE PART
11422W2165-108
TIE ROD ASSY11777081-178
BUSHING22BACB28AK04-024
BUSHING11BACB28AK04-038
(c)BOLT22BACB30NR4K15
(c)BOLT, HEX HEAD11BACB30NR4K17
(c)BOLT, PROTRUD-
ING HD
88BACB30NX5HK3
(c)BOLT44BACB30VF3K5
(c)BOLT, 100 DEG
HEX DR
1212BACB30YP5K4
(c)COLLAR,
PRELOAD
1010BACC30BH5
COLLAR, SHEAR1212BACC30BL5
NUT33BACN10YR4CD
(c)RIVET55BACR15BB4D6C
(c)RIVET, UNIVER-
SAL HD
1312BACR15FT5D6C
(c)RIVET, UNIVER-
SAL HD
1010BACR15FT5D7C
(c)RIVET55BACR15GF4D6
SHIM, LAMINAT-
ED
11BACS40R009D024F
WASHER33BACW10BP4CD
WASHER33BACW10BP4DP
(a) Discard the existing part.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
23 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 24

Group 2:
KIT 005W3441-2
NOTES
Existing Part
NumberName
Figure
New Part Number
8642
QTY
(b) You cannot use the existing part to replace the new or changed part.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip
length longer than indicated.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a)Primer2 ozBMS 10-11, Type I
(a)Paint2 ozBMS 10-83, Type
III Enamel, Boeing
Color 8328
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for
supplier data.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
NOTE: Parts below are not replaced individually but are replaced by a part of an assembly as
explained in the Notes column.
NotesQTYNameExisting Part Number
413W1221-
245B (a)
1Member413W1221-105B
413W1221-
267B (a) , (b)
2Member413W1221-113B
413W1221-33
(a) , (b) ,
413W1221-270
(c) , (d)
4Gusset413W1221-33
413W1221-35
(a) , (b) ,
413W1221-271
(c) , (d)
4Angle413W1221-35
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
24 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 25

NotesQTYNameExisting Part Number
413W1221-269
(a) , (b)
2Fitting Assy413W1224-7
413W1221-269
(a) , (d)
2Gusset413W1221-31
413W1221-246
(c) , (d)
4Gusset413W1221-55
qty (2)
413W1221-273
and qty (2)
413W1221-272
(c) , (d)
4Angle413W1221-60
413W1221-
268B (b)
1Member413W1221-106B
(a) Part of Support Structure Assy 413W1210-105B
(b) Part of Support Structure Assy 413W1210-106B
(c) Part in installation of Support Structure Assy 413W1210-105B
(d) Part in installation of Support Structure Assy 413W1210-106B
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Operators may choose to fabricate locating templates. Refer to FIGURE 2, Step 1, and to FIGURE 6,
Step 1, for information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
25 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 26

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
26 of 61
BOEING SERVICE BULLETIN 777-25-0482
BLANK PAGE

### Page 27

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
6. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
27 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 28

8. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
10. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
11. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
B. WORK INSTRUCTIONS
1. Access:
a. Remove overhead stowage box and module inboard of Door 1 left and right. Refer to 777
AMM 25-28-07 as an accepted procedure.
b. Remove lowered ceiling panel(s) immediately aft of overhead stowage box opening. Refer to
777 AMM 25-21-07 as an accepted procedure.
2. Remove specific left side lowered ceiling support structure members in accordance with FIGURE
1.
3. Install new left side lowered ceiling support structure members in accordance with FIGURE 2.
4. Install new left side tie rod attach fitting and tie rods on:
a. Group 1:
In accordance with FIGURE 3.
b. Group 2:
In accordance with FIGURE 4.
5. Remove specific right side lowered ceiling support structure members in accordance with FIGURE
5.
6. Install new right side lowered ceiling support structure members in accordance with FIGURE 6.
7. Install new right side tie rod attach fitting and tie rods on:
a. Group 1:
In accordance with FIGURE 7.
b. Group 2:
In accordance with FIGURE 8.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
28 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 29

8. Restore Access:
a. Install lowered ceiling panel(s) immediately aft of overhead stowage box opening. Refer to
777 AMM 25-21-07 as an accepted procedure.
b. Install overhead stowage box and module inboard of Door 1 left and right. Refer to 777 AMM
25-28-07 as an accepted procedure.
9. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1: February 21, 2012
29 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 30 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
STA
248
STA
445
DO NOT REMOVE
THIS TIE ROD
1974966
FIGURE 1: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL
(SHEET 1 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  30 of 61

### Page 31 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
(BEFORE)
2 HOLES IN EXISTING
STRUCTURE REMAIN
(2 LOCATIONS)
~ 2 HOLES IN EXISTING
STRUCTURE REMAIN
(2 LOCATIONS)
TIE RODS NOT
SHOWN, DO NOT
REMOVE TIE
RODS
3 HOLES IN EXISTING
STRUCTURE REMAIN
4 HOLES IN EXISTING
STRUCTURE REMAIN
(AFTER)
1975420
FIGURE 1: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL
(SHEET 2 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  31 of 61

### Page 32

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Disconnect at lower
end. Leave upper
end attached. Rotate
tie rod up and out of
work area and se-
cure it temporarily.
1777084-181Tie RodDisconnect1
1BACB30NR4K14BoltRemove
2NAS1149D0432JWasherRemove
1BACB28Y4C024BushingRemove
1BACN10YR4CDNutRemove
13BACR15FT5D*CRivetRemove2
2BACR15GF4D*RivetRemove3
4BACB30NX5HK3BoltRemove4
4BACC30BH5CollarRemove
Remove the follow-
ing parts as an as-
sembly:
1-SUPPORT STRUC-
TURE ASSY
Remove5
1413W1221-105BMemberRemove
1413W1221-113BMemberRemove
2413W1221-33GussetRemove
2413W1221-35AngleRemove
1413W1224-7Fitting AssyRemove
1413W1221-31GussetRemove
2413W1221-55GussetRemove
2413W1221-60AngleRemove
(a)--StructureInspect6
(a) Do a general visual inspection of the existing structure in the area of rework. Remove nicks, scratches,
gouges and/or minor corrosion, and protect all exposed aluminum in and around the repair areas in ac-
cordance with 777-200 SRM 51-20-01 or 777-300 SRM 51-20-01 as applicable.
FIGURE 1: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
32 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 33 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
STA
248
STA
445
DO NOT REMOVE
THIS TIE ROD
1975665
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 1 OF 7)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  33 of 61

### Page 34 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
CEILING PANEL OR
RIGID TEMPLATE
TIE ROD NOT
SHOWN, DO NOT
REMOVE TIE
ROD
TIE ROD NOT
SHOWN, DO NOT
REMOVE TIE
ROD
0.44  0.44
A-A  NBD
1976608
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 2 OF 7)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  34 0f 61

### Page 35 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
0.550
0.470-
9
0.462
0.382
REQUIRED  SHIM IF  EQUAL DISTANCE  TOP AND BOTTOM
E  1976616
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 3 OF 7)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  35 of 61

### Page 36

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Use existing ceiling
panel as locating
template (or fabri-
cate similar rigid
template). Make
sure that ceiling
panel can be in-
stalled and that tie
rods align with new
Support Structure
Assy before attach-
ing gussets and an-
gles.
1413W1210-105BSUPPORT STRUC-
TURE ASSY - LOW-
ERED CEILING, SECT
41
Install (New)1
2413W1221-246BGUSSETInstall (New)2
Use existing holes in
rail. Drill new holes
in gusset.
4BACR15FT5D6CRIVET, UNIVERSAL
HD
Install (New)
Use pilot holes in
Step 2 gusset. Drill
new holes in Step 1
Support Structure
Assy.
4BACR15FT5D7CRIVET, UNIVERSAL
HD
Install (New)3
1413W1221-269BGUSSETInstall (New)4
Use existing holes in
rail. Drill new holes
in gusset.
3BACR15FT5D6CRIVET, UNIVERSAL
HD
Install (New)
Use pilot holes in
Step 4 gusset. Drill
new holes in Step 1
Support Structure
Assy.
2BACR15FT5D6CRIVET, UNIVERSAL
HD
Install (New)5
1-Ceiling Panel or Tem-
plate
Remove6
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 4 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
36 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 37

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1413W1221-270BGUSSETInstall (New)7
Use shim if required
between new gusset
and existing rail. Re-
move 0.003 thick
laminations as nec-
essary. A gap of
0.005 max is permit-
ted between rail and
gusset before fasten-
er installation.
1BACS40R009D024FSHIM, LAMINATEDInstall (New)
Use existing holes in
rail. Drill new holes
in gusset and shim.
Install with counter-
sunk head on ceiling
panel side of rail.
2BACR15GF4D6RIVETInstall (New)
Use pilot holes in
Step 7 gusset. Drill
new holes in Step 1
Support Structure
Assy. Install with
countersunk head
on ceiling panel side
of rail.
2BACR15GF4D6RIVETInstall (New)8
1413W1221-271BANGLEInstall (New)9
Use existing holes in
rail. Drill holes in an-
gle.
4BACR15FT5D7CRIVET, UNIVERSAL
HD
Install (New)
Use pilot holes in
Step 9 angle. Drill
holes in Step 1 Sup-
port Structure Assy.
4BACR15BB4D6CRIVETInstall (New)10
1413W1221-272BCORNER BRACKETInstall (New)11
Use existing hole in
rail. Drill new hole
0.161 - 0.164 in. dia.
in bracket. Install
with head on bracket
side. (a)
1BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)
Collar on rail side.1BACC30BH5COLLAR, PRELOADInstall (New)
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 5 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
37 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 38

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Use pilots in Step 11
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail. Install with
head on bracket
side.
3BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)12
Collar on rail side.3BACC30BH5COLLAR, PRELOADInstall (New)
Use pilots in Step 11
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail or Step 1 Sup-
port Structure Assy.
Install with counter-
sunk head on rail or
Support Structure
Assy side.
6BACB30YP5K4BOLT, 100 DEG HEX
DR
Install (New)13
Collar on bracket
side.
6BACC30BL5COLLAR, SHEARInstall (New)
1413W1221-273BCORNER BRACKETInstall (New)14
Use existing hole in
rail. Drill new hole
0.161 - 0.164 in. dia.
in bracket. Install
with head on bracket
side. (a)
1BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)
Collar on rail side.1BACC30BH5COLLAR, PRELOADInstall (New)
Use pilots in Step 14
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail. Install with
head on bracket
side.
3BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)15
Collar on rail side.3BACC30BH5COLLAR, PRELOADInstall (New)
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 6 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
38 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 39

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Use pilots in Step 14
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail or Step 1 Sup-
port Structure Assy.
Install with counter-
sunk head on rail or
Support Structure
Assy side.
6BACB30YP5K4BOLT, 100 DEG HEX
DR
Install (New)16
Collar on bracket
side.
6BACC30BL5COLLAR, SHEARInstall (New)
(a) Remaining open holes are acceptable.
The parts shown in the table below are provided as extra parts for this figure.
MORE DATAQTYIDENTIFICATIONNAME
2BACC30BH5COLLAR, PRELOAD
1BACR15BB4D6CRIVET
3BACR15FT5D6CRIVET, UNIVERSAL
HD
2BACR15FT5D7CRIVET, UNIVERSAL
HD
1BACR15GF4D6RIVET
FIGURE 2: LEFT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 7 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
39 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 40 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
This Figure applies only to: Group 1.
STA
248
STA
445
(4 LOCATIONS)
1975667
FIGURE 3: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 1 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  40 of 61

### Page 41 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
8.75
STA
397.25
FWD
A-A
1975695
FIGURE 3: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 2 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  41 of 61

### Page 42

More DataQtyIdentificationNameTaskStep
1777084-181Tie RodInstall (Kept)1
Near side.1BACB30NR4K15BOLTInstall (New)
Near side.1BACW10BP4CDWASHERInstall (New)
Near side1BACB28AK04-024BUSHINGInstall (New)
Far side1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
(a)1422W2165-111MISCELLANEOUS -
MACHINE PART
Install (New)2
Install 2 near side, 2
far side. (b) , (c)
4BACB30VF3K5BOLT, 100 DEG HEADInstall (New)
1777081-178TIE ROD ASSYInstall (New)3
Near side.1BACB30NR4K15BOLTInstall (New)
Near side.1BACW10BP4CDWASHERInstall (New)
Near side.1BACB28AK04-024BUSHINGInstall (New)
Far side.1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
Near side.1BACB30NR4K17BOLT, HEX HEADInstall (New)4
Near side.1BACW10BP4CDWASHERInstall (New)
Near side.1BACB28AK04-038BUSHINGInstall (New)
Far side.1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
(a) Maximum gap allowed between part and rail before fastener installation is .003 in. Install shim if required
in accordance with 777-200 SRM 51-20-10 or 777-300 SRM 51-20-10.
(b) For countersink information, refer to 777-200 SRM 51-40-08 or 777-300 SRM 51-40-08 as an accepted
procedure.
(c) If a required hole is used for a ground, relocate ground to nearest unused hole. Refer to SWPM 20-20-
10 as an accepted procedure.
FIGURE 3: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
42 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 43 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
This Figure applies only to: Group 2.
STA
248
STA
445
(4 LOCATIONS)
1979176
FIGURE 4: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 1 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  43 of 61

### Page 44 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
8.75
STA
-WD  397.25
A-A
1979177
FIGURE 4: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 2 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  44 of 61

### Page 45

More DataQtyIdentificationNameTaskStep
1777084-181Tie RodInstall (Kept)1
Near side.1BACB30NR4K15BOLTInstall (New)
Near side.1BACW10BP4CDWASHERInstall (New)
Near side1BACB28AK04-024BUSHINGInstall (New)
Far side1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
(a)1422W2165-108MISCELLANEOUS -
MACHINE PART
Install (New)2
Install 2 near side, 2
far side. (b), (c)
4BACB30VF3K5BOLT, 100 DEG HEADInstall (New)
1777081-178TIE ROD ASSYInstall (New)3
Near side.1BACB30NR4K15BOLTInstall (New)
Near side.1BACW10BP4CDWASHERInstall (New)
Near side.1BACB28AK04-024BUSHINGInstall (New)
Far side.1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
Near side.1BACB30NR4K17BOLT, HEX HEADInstall (New)4
Near side.1BACW10BP4CDWASHERInstall (New)
Near side.1BACB28AK04-038BUSHINGInstall (New)
Far side.1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
(a) Maximum gap allowed between part and rail before fastener installation is .003 in. Install shim if required
in accordance with 777-200 SRM 51-20-10 or 777-300 SRM 51-20-10.
(b) For countersink information, refer to 777-200 SRM 51-40-08 or 777-300 SRM 51-40-08 as an accepted
procedure.
(c) If a required hole is used for a ground, relocate ground to nearest unused hole. Refer to SWPM 20-20-
10 as an accepted procedure.
FIGURE 4: LEFT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
45 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 46 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
STA
248
STA
445
AND
DO NOT REMOVE
THIS TIE ROD
1975703
FIGURE 5: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL
(SHEET 1 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  46 of 61

### Page 47 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
(BEFORE)
/2 HOLES IN EXISTING
STRUCTURE REMAIN
(2 LOCATIONS)
2 HOLES IN EXISTING
STRUCTURE REMAIN
(2 LOCATIONS)
TIE RODS NOT
SHOWN, DO NOT
REMOVE TIE RODS
-3 HOLES IN EXISTING
STRUCTURE REMAIN
4 HOLES IN EXISTING
STRUCTURE REMAIN
(AFTER)
1975708
FIGURE 5: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL
(SHEET 2 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  47 of 61

### Page 48

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Disconnect at lower
end. Leave upper
end attached. Rotate
tie rod up and out of
work area and se-
cure it temporarily.
1777084-181Tie RodDisconnect1
1BACB30NR4K14BoltRemove
2NAS1149D0432JWasherRemove
1BACB28Y4C024BushingRemove
1BACN10YR4CDNutRemove
13BACR15FT5D*CRivetRemove2
2BACR15GF4D*RivetRemove3
4BACB30NX5HK3BoltRemove4
4BACC30BH5CollarRemove
Remove the follow-
ing parts as an as-
sembly:
1-SUPPORT STRUC-
TURE ASSY
Remove5
1413W1221-106BMemberRemove
1413W1221-113BMemberRemove
2413W1221-33GussetRemove
2413W1221-35AngleRemove
1413W1224-7Fitting AssyRemove
1413W1221-31GussetRemove
2413W1221-55GussetRemove
2413W1221-60AngleRemove
(a)--StructureInspect6
(a) Do a general visual inspection of the existing structure in the area of rework. Remove nicks, scratches,
gouges and/or minor corrosion, and protect all exposed aluminum in and around the repair areas in ac-
cordance with 777-200 SRM 51-20-01 or 777-300 SRM 51-20-01 as applicable.
FIGURE 5: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE REMOVAL
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
48 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 49 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
STA
248
STA
445
• DO NOT REMOVE
THIS TIE ROD
1975770
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 1 OF 7)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  49 of 61

### Page 50 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
CEILING PANEL OR
RIGID TEMPLATE
TIE ROD NOT
SHOWN, DO NOT
REMOVE THIS
TIE ROD
TIE ROD NOT
SHOWN, DO NOT
REMOVE THIS
TIE ROD
0.44  0.44
INBD  A-A  1975836
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 2 OF 7)
Original issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  50 of 61

### Page 51 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
0.550
- 0.470
10)
-0.462
0.382
EQUAL DISTANCE  TOP AND BOTTOM  SHIM IF  REQUIRED
1976247
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 3 OF 7)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  51 of 61

### Page 52

More DataQtyIdentificationNameTaskStep
Use existing ceiling
panel as locating
template (or fabri-
cate similar rigid
template). Make
sure that ceiling
panel can be in-
stalled and that tie
rods align with new
Support Structure
Assy before attach-
ing gussets and an-
gles. (b)
1413W1210-106BSUPPORT STRUC-
TURE ASSY - LOW-
ERED CEILING, SECT
41
Install (New)1
2413W1221-246BGUSSETInstall (New)2
Use existing holes in
rail. Drill new holes
in gusset.
4BACR15FT5D6CRIVET, UNIVERSAL
HD
Install (New)
Use pilot holes in
Step 2 gusset. Drill
new holes in Step 1
Support Structure
Assy.
4BACR15FT5D7CRIVET, UNIVERSAL
HD
Install (New)3
1413W1221-269BGUSSETInstall (New)4
Use existing holes in
rail. Drill new holes
in gusset.
3BACR15FT5D6CRIVET, UNIVERSAL
HD
Install (New)
Use pilot holes in
Step 4 gusset. Drill
new holes in Step 1
Support Structure
Assy.
2BACR15FT5D6CRIVET, UNIVERSAL
HD
Install (New)5
No longer required
after upper gussets
have been installed.
1-Ceiling Panel or Tem-
plate
Remove6
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 4 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
52 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 53

More DataQtyIdentificationNameTaskStep
1413W1221-270BGUSSETInstall (New)7
Use shim if required
between new gusset
and existing rail. Re-
move 0.003 thick
laminations as nec-
essary. A gap of
0.005 max is permit-
ted between rail and
gusset before fasten-
er installation.
1BACS40R009D024FSHIM, LAMINATEDInstall (New)
Use existing holes in
rail. Drill new holes
in gusset and shim.
Install with counter-
sunk head on ceiling
panel side of rail.
2BACR15GF4D6RIVETInstall (New)
Use pilot holes in
Step 7 gusset. Drill
new holes in Step 1
Support Structure
Assy. Install with
countersunk head
on ceiling panel side
of rail.
2BACR15GF4D6RIVETInstall (New)8
1413W1221-271BANGLEInstall (New)9
Use existing holes in
rail. Drill holes in an-
gle.
4BACR15FT5D7CRIVET, UNIVERSAL
HD
Install (New)
Use pilot holes in
Step 9 angle. Drill
holes in Step 1 Sup-
port Structure Assy.
4BACR15BB4D6CRIVETInstall (New)10
1413W1221-272BCORNER BRACKETInstall (New)11
Use existing hole in
rail. Drill new hole
0.161 - 0.164 in. dia.
in bracket. Install
with head on bracket
side. (a)
1BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)
Collar on rail side.1BACC30BH5COLLAR, PRELOADInstall (New)
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 5 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
53 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 54

More DataQtyIdentificationNameTaskStep
Use pilots in Step 11
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail. Install with
head on bracket
side.
3BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)12
Collar on rail side.3BACC30BH5COLLAR, PRELOADInstall (New)
Use pilots in Step 11
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail or Step 1 Sup-
port Structure Assy.
Install with counter-
sunk head on rail or
Support Structure
Assy side.
6BACB30YP5K4BOLT, 100 DEG HEX
DR
Install (New)13
Collar on bracket
side.
6BACC30BL5COLLAR, SHEARInstall (New)
1413W1221-273BCORNER BRACKETInstall (New)14
Use existing hole in
rail. Drill new hole
0.161 - 0.164 in. dia.
in bracket. Install
with head on bracket
side. (a)
1BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)
Collar on rail side.1BACC30BH5COLLAR, PRELOADInstall (New)
Use pilots in Step 14
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail. Install with
head on bracket
side.
3BACB30NX5HK3BOLT, PROTRUDING
HD
Install (New)15
Collar on rail side.3BACC30BH5COLLAR, PRELOADInstall (New)
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 6 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
54 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 55

More DataQtyIdentificationNameTaskStep
Use pilots in Step 14
bracket. Drill holes
0.161 - 0.164 in. dia.
in rail or Step 1 Sup-
port Structure Assy.
Install with counter-
sunk head on rail or
Support Structure
Assy side.
6BACB30YP5K4BOLT, 100 DEG HEX
DR
Install (New)16
Collar on bracket
side.
6BACC30BL5COLLAR, SHEARInstall (New)
(a) Remaining open holes are acceptable.
(b) On some airplanes, the ceiling panel assembly might contain one insert in a location where the support
structure member (existing or new) does not have a hole for a fastener. If such a condition is encountered,
the fastener at this hole location may be omitted. Alternatively, removing the blocked insert and installing
an operator-furnished insert SL2334-3A1, fastener BACS12GU3K5, and washer NAS1149D0332J, in the
panel at the hole location adjacent to the blocked insert is also acceptable. Refer to 777 AMM 25-00-00,
Potted Inserts Repair, and BAC5583 Method B, Wet Potting of Inserts, as accepted procedures.
The parts shown in the table below are provided as extra parts for this figure.
MORE DATAQTYIDENTIFICATIONNAME
2BACC30BH5COLLAR, PRELOAD
1BACR15BB4D6CRIVET
4BACR15FT5D6CRIVET, UNIVERSAL
HD
2BACR15FT5D7CRIVET, UNIVERSAL
HD
1BACR15GF4D6RIVET
FIGURE 6: RIGHT SIDE LOWERED CEILING SUPPORT STRUCTURE INSTALLATION
(SHEET 7 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
55 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 56 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
This Figure applies only to: Group 1.
STA
STA  248
445
(4 LOCATIONS)
DO NOT REMOVE
THIS TIE ROD
1976528
FIGURE 7: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 1 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  56 of 61

### Page 57 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
8.75
STA
397.25
FWD
A-A
1976531
FIGURE 7: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 2 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  57 of 61

### Page 58

More DataQtyIdentificationNameTaskStep
1777084-181Tie RodInstall (Kept)1
Near side.1BACB30NR4K15BOLTInstall (New)
Near side.1BACW10BP4CDWASHERInstall (New)
Far side1BACB28AK04-024BUSHINGInstall (New)
Far side1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
(a)1422W2165-111MISCELLANEOUS -
MACHINE PART
Install (New)2
Install 2 near side, 2
far side. (b) , (c)
4BACB30VF3K5BOLT, 100 DEG HEADInstall (New)
1777081-178TIE ROD ASSYInstall (New)3
Near side.1BACB30NR4K15BOLTInstall (New)
Near side.1BACW10BP4CDWASHERInstall (New)
Far side1BACB28AK04-024BUSHINGInstall (New)
Far side.1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
Near side.1BACB30NR4K17BOLT, HEX HEADInstall (New)4
Near side.1BACW10BP4CDWASHERInstall (New)
Near side.1BACB28AK04-038BUSHINGInstall (New)
Far side.1BACW10BP4DPWASHERInstall (New)
Far side.1BACN10YR4CDNUTInstall (New)
(a) Maximum gap allowed between part and rail before fastener installation is .003 in. Install shim if required
in accordance with 777-200 SRM 51-20-10 or 777-300 SRM 51-20-10.
(b) For countersink information, refer to 777-200 SRM 51-40-08 or 777-300 SRM 51-40-08 as an accepted
procedure.
(c) If a required hole is used for a ground, relocate ground to nearest unused hole. Refer to SWPM 20-20-
10 as an accepted procedure.
FIGURE 7: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 24, 2011
777-25-0482Revision 1 February 21, 2012
58 of 61
BOEING SERVICE BULLETIN 777-25-0482

### Page 59 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
This Figure applies only to: Group 2.
STA
STA  248
445
(4 LOCATIONS)
A
DO NOT REMOVE
THIS TIE ROD
1979172
FIGURE 8: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 1 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  59 of 61

### Page 60 (OCR)

BOEING SERVICE BULLETIN 777-25-0482
8.75
STA
397.25
FWD
A-A
1979170
FIGURE 8: RIGHT SIDE TIE ROD AND ATTACH FITTING INSTALLATION
(SHEET 2 OF 3)
Original Issue: February 24, 2011
Revision 1 February 21, 2012  BOEING PROPRIETARY -  777-25-0482
Copyright © Unpublished Work - See page 1 for details.  60 of 61

The text continues at https://openairdocs.org/service-documents/boeing/sb-777-25-0482/file/ceb5915cf4b4.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
