# Boeing Special Attention Service Bulletin 777-25-0507: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-1417; AD 2013-05-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 777-25-0507](https://openairdocs.org/service-documents/boeing/sb-777-25-0507.md)
- Title as filed: U.S. DOT/FAA - Service Information
- Pages: 22
- PDF: https://openairdocs.org/files/sha256/6e/b0/6eb0ca6d8fb2261f6e0f8e0684005ef410c7d79f832e06574f10d390c614a441
- Page: https://openairdocs.org/service-documents/boeing/sb-777-25-0507/file/6eb0ca6d8fb2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-25-0507
Original Issue: June 30, 2011
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Emergency - Door-Mounted Escape Slide Pack - Change
to Escape Slide/Raft to Prevent Corrosion of Packboard Release Mechanism
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
1 of 22
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
2 of 22
BOEING SERVICE BULLETIN 777-25-0507
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 3
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 3
D. Description .............................................. 1 4
E. Compliance .............................................. 1 5
F. Approval ............................................... 1 5
G. Manpower .............................................. 1 5
H. Weight and Balance Changes .................................... 1 6
I. Electrical Load Data ......................................... 1 6
J. References .............................................. 1 6
1. Existing Data .......................................... 1 6
2. Data supplied with this Service Bulletin ............................ 1 6
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 7
K. Publications Affected ........................................ 1 7
L. Interchangeability and Intermixability of Parts ........................... 1 7
2. MATERIAL INFORMATION ........................................ 1 9
A. Material - Price and Availability ................................... 1 9
B. Industry Support Information .................................... 1 9
C. Parts Necessary For Each Airplane ................................. 1 9
1. Kits/Parts ............................................ 1 9
2. Parts and Materials Supplied by the Operator ........................ 1 9
3. Parts Modified and Reidentified ................................ 1 9
4. Parts Removed and Not Replaced .............................. 1 9
D. Parts Necessary to Change Spares ................................. 1 9
E. Special Tooling - Price and Availability ............................... 1 9
F. Special Tooling Necessary to do this Service Bulletin ....................... 1 9
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 1
A. GENERAL INFORMATION ..................................... 2 1
B. WORK INSTRUCTIONS ....................................... 2 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
3 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
4 of 22
BOEING SERVICE BULLETIN 777-25-0507
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 777-25-0507Original Issue: June 30, 2011
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Emergency - Door-Mounted Escape Slide Pack - Change
to Escape Slide/Raft to Prevent Corrosion of Packboard Release Mechanism
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
Inspect the housing assembly to determine
if it is unsealed and replace the assembly
with a new assembly if necessary.
Air Cruisers Company SB 777-107-25-30,
Original Issue
Air Cruisers Compa-
ny
BACKGROUND
This service bulletin describes modification to door mounted escape slide/rafts. Modification is done in accordance
with Air Cruisers Company SB 777-107-25-30 to packboard release mechanism to prevent corrosion. If you do
not do this service bulletin, escape slide/rafts may not deploy when required and may prohibit doors from opening
in the armed mode.
Three 777 operators have reported the detection of corrosion at first overhaul of main deck door mounted escape
slide/raft packboard release mechanisms. Two of the operators have reported incidents at the time of first
deployment where the escape slide/raft did not release from the door and prevented door opening in the armed
mode. The third operator reported evidence of corrosion on 25 out of 270 escape slide/rafts overhauled during
the last 3 years.
Investigation revealed several packboard release mechanism components exhibited in-service galvanic corrosion.
The cause was due to non-isolation of dissimilar metals, use of galvanic corrosion susceptible metals, and
finishes that are not effective in protecting from galvanic corrosion.
Boeing Service Related Problem (SRP) 777-SRP-25-0293 is related to this service bulletin. This SRP is described
in Fleet Team Digest Article 777 FTD 25-10002.
ACTION (PRR 62777-75S)
Airplanes are divided into groups because of difference in number of entry doors or difference in entry door
numbers.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
5 of 22

### Page 6

Group 1:
Remove escape slide/rafts at passenger/crew entry doors 1, 2, 3, and 4, left and right. Modify escape slide/rafts
in accordance with Air Cruisers Company SB 777-107-25-30. Reinstall escape slide/rafts.
Group 2:
Remove escape slide/rafts at passenger/crew entry doors 1, 2, 4, and 5, left and right. Modify escape slide/rafts
in accordance with Air Cruisers Company SB 777-107-25-30. Reinstall escape slide/rafts.
Group 3:
Remove escape slide/rafts at crew entry doors 1 left and right. Modify escape slide/rafts in accordance with Air
Cruisers Company SB 777-107-25-30. Reinstall escape slide/rafts.
EFFECTIVITY
Model 777-200, 777-200LR, 777-300, 777-300ER, and 777F airplanes. Refer to Paragraph 1.A., Effectivity for
the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the changes given in this service bulletin be done within 42 months after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Elapsed
Hours
Total Task
Hours
Airplanes
8.00 (a)16.00 (a)Group 1 and 2 (8 escape slide/rafts)
2.00 (a)4.00 (a)Group 3 (2 escape slide/rafts)
(a) Does not include time required to modify escape slide/rafts in accordance with Air Cruisers
Company SB 777-107-25-30.
MATERIAL INFORMATION
Refer to Air Cruisers Company SB 777-107-25-30.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
6 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-25-0507
MAIN ENTRY DOORS
ALL LOCATIONS
GROUP 1-200 SHOWN, DOORS 1, 2, 3, 4, LEFT AND RIGHT
GROUP 2 -300 SIMILAR, DOORS 1.  2, 4, 5, LEFT AND RIGHT
GROUP 3 -F SIMILAR, DOORS 1 LEFT AND RIGHT
MAIN ENTRY DOOR
(TYPICAL, ALL LOCATIONS)
REWORK THE SLIDE/RAFTS IN
ACCORDANCE WITH AIR
CRUISERS SERVICE
BULLETIN TO PREVENT
PACKBOARD RELEASE
MECHANISM CORROSION
2018776
Original Issue: June 30, 2011
777-25-0507
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  7 of 22

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
8 of 22
BOEING SERVICE BULLETIN 777-25-0507
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-25-0507
Original Issue: June 30, 2011
ATA System: 2566
SUBJECT: EQUIPMENT/FURNISHINGS - Emergency - Door-Mounted Escape Slide Pack - Change
to Escape Slide/Raft to Prevent Corrosion of Packboard Release Mechanism
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 62777-75S for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
777-200, 777-200LR Airplanes-1
777-300, 777-300ER Airplanes-2
777F Airplanes-3
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA001 - WA017
1WA076 - WA079
1WA086 - WA093
1WA101 - WA104
1WA116 - WA119
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
9 of 22

### Page 10

GroupVariable Number
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
1WA206 - WA212
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281 - WA283
1WA301 - WA304
1WB001 - WB021
1WB031 - WB046
1WB051 - WB088
1WB101 - WB106
1WB121 - WB125
1WB131 - WB148
1WB151 - WB155
1WB161 - WB177
1WB181 - WB194
1WB201 - WB215
1WB231 - WB247
1WB271 - WB273
1WB276 - WB286
1WB291 - WB302
1WB306 - WB307
1WB311 - WB337
1WB341 - WB342
1WB366 - WB368
1WB371 - WB388
1WB406
1WB411 - WB413
1WB416 - WB439
1WB446 - WB453
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
10 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 11

GroupVariable Number
1WB476
1WB481 - WB484
2WB501 - WB512
2WB531 - WB537
2WB551 - WB554
2WB591 - WB597
2WB601 - WB606
2WB611 - WB622
2WB631 - WB638
2WB646 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC120
1WC221 - WC224
1WC241 - WC243
1WC281 - WC290
1WC301 - WC308
1WC361 - WC364
1WC371 - WC374
1WC381 - WC395
1WC441
1WC446 - WC449
1WC456 - WC459
1WC486 - WC493
1WC506 - WC508
1WC521 - WC522
1WC531 - WC536
1WC546 - WC548
1WC556
1WC566 - WC567
1WC571 - WC574
1WC581
1WD001 - WD002
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
11 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 12

GroupVariable Number
1WD011 - WD018
1WD031 - WD036
1WD046 - WD055
1WD066 - WD075
1WD081 - WD088
1WD091
1WD096
1WD101 - WD103
2WD501 - WD513
2WD521 - WD541
2WD546 - WD554
2WD561 - WD573
2WD581 - WD599
2WD606 - WD609
2WD621 - WD632
2WD651 - WD665
2WD671 - WD676
2WD691 - WD709
2WD741 - WD752
2WD761 - WD771
2WD786 - WD788
2WD796 - WD813
2WD826 - WD837
2WD846 - WD861
2WD871 - WD883
2WD911 - WD915
2WD921 - WD922
2WD936 - WD939
2WD946 - WD951
2WD966 - WD970
2WD981 - WD982
2WD986 - WD987
2WD996
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
12 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 13

GroupVariable Number
2WE001 - WE004
2WE011 - WE012
2WE021 - WE024
2WE031
2WE051 - WE052
2WE071
2WE081 - WE082
2WE126 - WE132
3WF001 - WF004
3WF016 - WF020
3WF031 - WF032
3WF046 - WF054
3WF076 - WF077
3WF081 - WF088
3WF096 - WF099
3WF106 - WF107
3WF111 - WF112
3WF121
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for
the recommended use.
B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
Inspect the housing assembly to determine
if it is unsealed and replace the assembly
with a new assembly if necessary.
Air Cruisers Company SB 777-107-25-30,
Original Issue
Air Cruisers Compa-
ny
C. Reason
This service bulletin describes modification to door mounted escape slide/rafts. Modification is done
in accordance with Air Cruisers Company SB 777-107-25-30 to packboard release mechanism to
prevent corrosion. If you do not do this service bulletin, escape slide/rafts may not deploy when required
and may prohibit doors from opening in the armed mode.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
13 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 14

Three 777 operators have reported the detection of corrosion at first overhaul of main deck door mounted
escape slide/raft packboard release mechanisms. Two of the operators have reported incidents at the
time of first deployment where the escape slide/raft did not release from the door and prevented door
opening in the armed mode. The third operator reported evidence of corrosion on 25 out of 270 escape
slide/rafts overhauled during the last 3 years.
Investigation revealed several packboard release mechanism components exhibited in-service galvanic
corrosion. The cause was due to non-isolation of dissimilar metals, use of galvanic corrosion susceptible
metals, and finishes that are not effective in protecting from galvanic corrosion.
Boeing Service Related Problem (SRP) 777-SRP-25-0293 is related to this service bulletin. This SRP
is described in Fleet Team Digest Article 777 FTD 25-10002.
D. Description
Airplanes are divided into groups because of difference in number of entry doors or difference in entry
door numbers.
Group 1:
Remove escape slide/rafts at passenger/crew entry doors 1, 2, 3, and 4, left and right. Modify escape
slide/rafts in accordance with Air Cruisers Company SB 777-107-25-30. Reinstall escape slide/rafts.
Group 2:
Remove escape slide/rafts at passenger/crew entry doors 1, 2, 4, and 5, left and right. Modify escape
slide/rafts in accordance with Air Cruisers Company SB 777-107-25-30. Reinstall escape slide/rafts.
Group 3:
Remove escape slide/rafts at crew entry doors 1 left and right. Modify escape slide/rafts in accordance
with Air Cruisers Company SB 777-107-25-30. Reinstall escape slide/rafts.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
831, 832, 834, 835, 841, 842, 844, 845777-200, 777-200LR
Group 2:
Affected Maintenance Zones
ZoneModel
831, 832, 834, 835, 841, 842, 844, 845777-300, 777-300ER
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
14 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 15

Group 3:
Affected Maintenance Zones
ZoneModel
831, 841777F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the changes given in this service bulletin be done within 42 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1-2:
Elapsed HoursTask HoursNumber of Per-
sons
Task
4.008.002Remove 8 escape
slide/rafts
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
15 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 16

Group 1-2:
Elapsed HoursTask HoursNumber of Per-
sons
Task
4.008.002Reinstall 8 escape
slide/rafts
8.0016.00TOTAL FOR EACH AIRPLANE (a)
(a) Time to modify escape slide/rafts in accordance with Air Cruisers Company
SB 777-107-25-30 is not included.
Group 3:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.002.002Remove 2 escape
slide/rafts
1.002.002Reinstall 2 escape
slide/rafts
2.004.00TOTAL FOR EACH AIRPLANE (a)
(a) Time to modify escape slide/rafts in accordance with Air Cruisers Company
SB 777-107-25-30 is not included.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 62777-75S
b. 777 Aircraft Maintenance Manual (AMM) 25-66-01
c. 777 Fleet Team Digest (FTD) 25-10002
d. Air Cruisers Company Service Bulletin 777-107-25-30
e. Service Related Problem (SRP) 777-SRP-25-0293
2. Data supplied with this Service Bulletin
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
16 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 17

3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
ESCAPE SLIDE/RAFT INSTL462W1000
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-66777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
17 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 18

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
18 of 22
BOEING SERVICE BULLETIN 777-25-0507
BLANK PAGE

### Page 19

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Refer to Air Cruisers Company SB 777-107-25-30.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
Refer to Air Cruisers Company SB 777-107-25-30.
2. Parts and Materials Supplied by the Operator
Refer to Air Cruisers Company SB 777-107-25-30.
3. Parts Modified and Reidentified
NotesNew Part NumberNameQTYExisting Part Number
(a), (b), (c)-Escape Slide/Raft-S462W001-( )
(a) Make the change in accordance with Air Cruisers Company SB 777-107-25-30.
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that the change
done in accordance with this service bulletin was made.
(c) You can use the existing part to replace the new or changed part. If you use the existing part, you
cancel the effect of the change given in this service bulletin.
4. Parts Removed and Not Replaced
Refer to Air Cruisers Company SB 777-107-25-30.
D. Parts Necessary to Change Spares
Refer to Air Cruisers Company SB 777-107-25-30.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
19 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 20

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
20 of 22
BOEING SERVICE BULLETIN 777-25-0507
BLANK PAGE

### Page 21

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions, give the recommended
sequence of steps. The sequence of steps to do this service bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. Replacement of all slide/rafts at the same time is not required.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
21 of 22
BOEING SERVICE BULLETIN 777-25-0507

### Page 22

B. WORK INSTRUCTIONS
1. Group 1:
a. Remove escape slide/rafts at Doors 1, 2, 3, and 4, left and right. Refer to 777 AMM 25-66-01
as an accepted procedure.
b. Modify each escape slide/raft by doing a visual inspection of the housing assembly to determine
if it is unsealed, and if necessary, replace the housing assembly with a new housing assembly,
in accordance with Air Cruisers Company SB 777-107-25-30.
c. Install escape slide/rafts modified in accordance with Air Cruisers Company SB 777-107-25-30
at Doors 1, 2, 3, and 4, left and right. Refer to 777 AMM 25-66-01 as an accepted procedure.
d. Put the airplane back in a serviceable condition.
2. Group 2:
a. Remove escape slide/rafts at Doors 1, 2, 4, and 5, left and right. Refer to 777 AMM 25-66-01
as an accepted procedure.
b. Modify each escape slide/raft by doing a visual inspection of the housing assembly to determine
if it is unsealed, and if necessary, replace the housing assembly with a new housing assembly,
in accordance with Air Cruisers Company SB 777-107-25-30.
c. Install escape slide/rafts modified in accordance with Air Cruisers Company SB 777-107-25-30
at Doors 1, 2, 4, and 5, left and right. Refer to 777 AMM 25-66-01 as an accepted procedure.
d. Put the airplane back in a serviceable condition.
3. Group 3:
a. Remove escape slide/rafts at Doors 1 Left and Right. Refer to 777 AMM 25-66-01 as an
accepted procedure.
b. Modify each escape slide/raft by doing a visual inspection of the housing assembly to determine
if it is unsealed, and if necessary, replace the housing assembly with a new housing assembly,
in accordance with Air Cruisers Company SB 777-107-25-30.
c. Install escape slide/rafts modified in accordance with Air Cruisers Company SB 777-107-25-30
at Doors 1 Left and Right. Refer to 777 AMM 25-66-01 as an accepted procedure.
d. Put the airplane back in a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 30, 2011
777-25-0507
22 of 22
BOEING SERVICE BULLETIN 777-25-0507

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
