# Boeing Service Bulletin 777-25-0617: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0507; AD 2018-12-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 777-25-0617](https://openairdocs.org/service-documents/boeing/sb-777-25-0617.md)
- Title as filed: SB-777-25-0617
- Pages: 17
- PDF: https://openairdocs.org/files/sha256/cf/a8/cfa8b7e8c8a74f4320a879fc6d1d68449e69474985a667c3ac9d28961ddc4cc7
- Page: https://openairdocs.org/service-documents/boeing/sb-777-25-0617/file/cfa8b7e8c8a7

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
Number: 777-25-0617
Original Issue: June 06, 2014
ATA System: 2531
SUBJECT: EQUIPMENT/FURNISHINGS -Buffet/Galley - Steam Oven Water Filter Assembly
Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: June 06, 2014
777-25-0617
1 of 17
5.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
2 of 17
BOEING SERVICE BULLETIN 777-25-0617
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ......................................... 9
B. Concurrent Requirements ....................................... 9
C. Reason ................................................ 1 0
D. Description .............................................. 1 0
E. Compliance .............................................. 1 0
F. Approval ............................................... 1 0
G. Manpower .............................................. 1 1
H. Weight and Balance Changes .................................... 1 1
I. Electrical Load Data ......................................... 1 1
J. References .............................................. 1 1
1. Existing Data: ......................................... 1 1
2. Data Supplied with this Service Bulletin: ........................... 1 2
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 2
K. Publications Affected ........................................ 1 2
L. Interchangeability and Intermixability of Parts ........................... 1 2
M. Software Accomplishment Summary ................................ 1 2
2. MATERIAL INFORMATION ........................................ 1 3
A. Material - Price and Availability ................................... 1 3
B. Industry Support Information .................................... 1 3
C. Parts Necessary for Each Airplane ................................. 1 3
1. Kits/Parts ............................................ 1 3
2. Parts and Materials Supplied by the Operator ........................ 1 3
3. Parts Modified and Reidentified ................................ 1 3
4. Parts Removed and Not Replaced .............................. 1 3
D. Parts Necessary to Change Spares ................................. 1 3
E. Special Tooling - Price and Availability ............................... 1 3
F. Special Tooling Necessary to do this Service Bulletin ....................... 1 3
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 5
A. GENERAL INFORMATION ..................................... 1 5
B. WORK INSTRUCTIONS ....................................... 1 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
3 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
4 of 17
BOEING SERVICE BULLETIN 777-25-0617
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
SummaryNumber: 777-25-0617Original Issue: June 06, 2014
ATA System: 2531
SUBJECT: EQUIPMENT/FURNISHINGS -Buffet/Galley - Steam Oven Water Filter Assembly
Replacement
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will prevent the release of hot water from steam ovens in the passenger
compartment galleys when the steam oven door is opened. Water can collect in the steam oven cavity because
of Foreign Object Debris (FOD) in the water system that can prevent the correct operation of the solenoid valve.
If this service bulletin is not done, hot water can be released from the steam oven when the door is opened,
which could result in injuries to the cabin crew.
A Boeing 787 operator reported a problem with steam ovens P/N ASN2001-1 and P/N ASN2001-12, whereby
water can enter the steam oven cavity. This water then became heated and escaped when the door to the oven
was opened causing injury to a member of the cabin crew. It was found that for these steam ovens, the current
filter configuration lets FOD enter the steam oven water system, which can prevent a solenoid valve moving to
its closed position and subsequently let water into the steam oven cavity. A new water filter assembly has been
developed which includes a larger screen to prevent FOD from moving downstream to block the valve open.
As one Boeing 777 operator uses the same steam oven, Boeing has issued this service bulletin.
This service bulletin together with Jamco Corp SB ASN2001-25-3118, give instructions to replace the water
filter assembly for each steam oven with a P/N ASN2001-1 or P/N ASN2001-12.
Boeing Service Related Problem (SRP) 777-SRP-25-0336 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
NoAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
5 of 17

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 62777-98RS)
For each steam oven P/N ASN2001-1 or P/N ASN2001-12, replace the water filter assembly in accordance with
Jamco Corp SB ASN2001-25-3118.
EFFECTIVITY
777-300ER Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
Boeing recommends that the change given in this service bulletin be done within 375 days after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
6 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-25-0617
STA
STA  246
445
STA
655
STA
STA  825
825
+210
STA
1035
GALLEY F1
STA
STA  1434
GALLEY M7 A  1434
+189  • GALLEY M2
STA  I GALLEY M2A
1832
STA
2150
GALLEY A2
GALLEY A3
FOR EACH STEAM OVEN AT THE
IDENTIFIED LOCATIONS, REPLACE
THE WATER FILTER ASSEMBLY IN
ACCORDANCE WITH JAMCO SB
STEAM OVEN  ASN2001-25-3118.
(TYPICAL)
2336579
Original Issue: June 06, 2014
Export Controlled ECCN: 9E991 - BOEING  777-25-0617
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 17

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
8 of 17
BOEING SERVICE BULLETIN 777-25-0617
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
Number: 777-25-0617
Original Issue: June 06, 2014
ATA System: 2531
SUBJECT: EQUIPMENT/FURNISHINGS -Buffet/Galley - Steam Oven Water Filter Assembly
Replacement
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 777-300ER Airplanes, line numbers 867, 875, 882, 933, 938,
976, 1023, 1081, and 1109 in 1 Group. The Variable Numbers and Group Information for the
applicable airplanes is given below. Refer to PRR 62777-98RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
777-300ER Airplanes with steam ovens P/N ASN2001-1 or P/N
ASN2001-12 installed.
-1
Airplane Models:
777-300ER
GroupVariable Number
1WD949 - WD957
2. Spares Affected
None.
B. Concurrent Requirements
The service bulletin listed below must be done at the same time as this service bulletin:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
9 of 17

### Page 10

DescriptionService BulletinCompany
This service bulletin gives instructions to re-
place water filter assembly on steam ovens
P/N ASN2001-1 and P/N ASN2001-12.
Jamco Corp SB ASN2001-25-3118, Revision
No. 1
Jamco
C. Reason
Accomplishment of this service bulletin will prevent the release of hot water from steam ovens in the
passenger compartment galleys when the steam oven door is opened. Water can collect in the steam
oven cavity because of Foreign Object Debris (FOD) in the water system that can prevent the correct
operation of the solenoid valve. If this service bulletin is not done, hot water can be released from the
steam oven when the door is opened, which could result in injuries to the cabin crew.
A Boeing 787 operator reported a problem with steam ovens P/N ASN2001-1 and P/N ASN2001-12,
whereby water can enter the steam oven cavity. This water then became heated and escaped when
the door to the oven was opened causing injury to a member of the cabin crew. It was found that for
these steam ovens, the current filter configuration lets FOD enter the steam oven water system, which
can prevent a solenoid valve moving to its closed position and subsequently let water into the steam
oven cavity. A new water filter assembly has been developed which includes a larger screen to prevent
FOD from moving downstream to block the valve open. As one Boeing 777 operator uses the same
steam oven, Boeing has issued this service bulletin.
This service bulletin together with Jamco Corp SB ASN2001-25-3118, give instructions to replace the
water filter assembly for each steam oven with a P/N ASN2001-1 or P/N ASN2001-12.
Boeing Service Related Problem (SRP) 777-SRP-25-0336 is related to this service bulletin.
D. Description
For each steam oven P/N ASN2001-1 or P/N ASN2001-12, replace the water filter assembly in
accordance with Jamco Corp SB ASN2001-25-3118.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
222, 231, 232, 251, 252, 261, 262777-300ER
E. Compliance
Boeing recommends that the change given in this service bulletin be done within 375 days after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved. This service
bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as
modified by other approved Boeing changes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
10 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 11

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
0.10.11ACCESS
(a)(a)-WATER FILTER AS-
SEMBLY REPLACE-
MENT
0.10.11CLOSE ACCESS
0.2 (a)0.2 (a)TOTAL FOR EACH AIRPLANE
(a) The time to make the change to each steam oven in accordance with Jamco
Corp SB ASN2001-25-3118 Service Bulletin is not included.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 62777-98RS
b. Boeing Service Related Problem (SRP) 777-SRP-25-0336
c. Service Bulletin Index D624W001
d. Jamco Corp Service Bulletin ASN2001-25-3118
NOTE: The supplier was told to send copies of the service bulletin to each operator.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
11 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 12

2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-31777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
12 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 13

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. Refer to Jamco Corp SB ASN2001-25-3118.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
Refer to Jamco Corp SB ASN2001-25-3118.
3. Parts Modified and Reidentified
Refer to Jamco Corp SB ASN2001-25-3118.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
13 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 14

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
14 of 17
BOEING SERVICE BULLETIN 777-25-0617
BLANK PAGE

### Page 15

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Airplane Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 777
Airplane Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
15 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 16

7. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
8. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
B. WORK INSTRUCTIONS
1. On the left power management panel, P110, open the circuit breakers shown in the table below
and install safety tags:
NameNumberColumnRow
DR 4L GLYC2560720J
DR 2 GLYC2560621J
2. On the right power management panel, P210, open the circuit breakers shown in the table below
and install safety tags:
NameNumberColumnRow
DR 1 GLYC256051K
DR 5R GLYC256082K
3. In the passenger compartment, for each steam oven P/N ASN2001-1 or P/N ASN2001-12 at the
locations identified in the table below, replace the water filter assembly in accordance with Jamco
Corp SB ASN2001-25-3118.
Location DescriptionGalley
Section 41, Right Side, Forward of Door 1RF1
Section 43, Center, Aft of Door 2M2
Section 43, Center, Aft of Door 2M2A
Section 46, Center, Door 4M7
Section 47, Left Side, Aft of Door 5A2
Section 47, Right Side, Aft of Door 5A3
4. On the right power management panel, P210, remove the safety tags and close the circuit breakers
shown in the table below:
NameNumberColumnRow
DR 1 GLYC256051K
DR 5R GLYC256082K
5. On the left power management panel, P110, remove the safety tags and close the circuit breakers
shown in the table below:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
16 of 17
BOEING SERVICE BULLETIN 777-25-0617

### Page 17

NameNumberColumnRow
DR 4L GLYC2560720J
DR 2 GLYC2560621J
6. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 06, 2014
777-25-0617
17 of 17
BOEING SERVICE BULLETIN 777-25-0617

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
