# Boeing Special Attention Service Bulletin 777-25-0619: SB-777-25-0619-02

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-1879; AD 2024-15-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 777-25-0619](https://openairdocs.org/service-documents/boeing/sb-777-25-0619.md)
- Title as filed: SB-777-25-0619-02
- Pages: 53
- PDF: https://openairdocs.org/files/sha256/02/49/0249a4e08d7a5209f96eb847a0740b622db2e16d60a03e3d5b8c6fe39bb47773
- Page: https://openairdocs.org/service-documents/boeing/sb-777-25-0619/file/0249a4e08d7a

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-25-0619
Original Issue: February 23, 2017
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
1 of 53
6.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
2 of 53
BOEING SERVICE BULLETIN 777-25-0619
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 25
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 27
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 28
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS
- REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1 -
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION
AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM . . . . . . . . . . . . . 43
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2 -
FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM . . . . . 46
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
3 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 4

APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3 -
CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND
CHECK OF THE HORIZONTAL MOVEMENT SYSTEM . . . . . . . . . . . . . . . . . . . 49
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4 -
FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION
AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM . . . . . . . . . . . . . . . . 51
APPENDIX E: CAPTAIN'S AND FIRST OFFICER'S SEATS HORIZONTAL MOVEMENT SYSTEM -
HORIZONTAL ACTUATOR - LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
4 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 5

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 777-25-0619Original Issue: February 23, 2017
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-16-05 is related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Effects of this Revision on airplanes on which the Original Issue or Revision 1 was previously done:
None.
REASON FOR REVISION
This revision is sent to list a newer issue number for each concurrent supplier service bulletin and to add an
option to install a serviceable seat for Condition 2 of Work Packages 1 and 2.
These sections were changed:
1. Summary, Background; changed information, added Service Related Problem (SRP) reference, and
changed the AD related information in the planning table.
2. Summary, Action; added Engineering Change Memo reference.
3. Summary, Compliance; added AD information.
4. Paragraph 1.A.1., Airplanes; changed and added information, listed specific line numbers and line
number ranges, and removed the note.
5. Paragraph 1.B., Concurrent Requirements; changed to list newer issue numbers of each supplier
service bulletin.
6. Paragraph 1.C., Reason; changed information, added SRP reference, and added Revision 2 information.
7. Paragraph 1.D., Description; added Revision 2 information.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
5 of 53

### Page 6

8. Paragraph 1.E., Compliance; changed information, added AD information and changed the header of
the compliance time columns. Added Option 1 and Option 2 for Condition 2 of Work Packages 1 and
2. Changed action wording to 'install a serviceable Captain's seat' in Option 3 for Condition 4 of Work
Package 1. Deleted logic diagrams information.
9. Paragraph 1.F., Approval; changed information and added Alternative Method Of Compliance (AMOC)
paragraph.
10. Paragraph 1.G., Manpower; deleted content and removed task relationships of footnote (b) of tables
for Work Packages 1 and 2, deleted content and removed task relationships of footnote (a) of tables
for Work Packages 3 and 4, changed footnote (a) for tables of Work Packages 1 and 2, changed
footnote (b) for tables of Work Packages 3 and 4, and removed a task from the table for Work Packages
3 and 4.
11. Paragraph 1.J.1., Existing Data; added references.
12. Paragraph 1.L., Interchangeability and Intermixability of Parts; corrected information.
13. Paragraph 3.B., Work Instructions; corrected the instruction for Condition 1 (Action 1) of Work Package
2, and added Option 1 and Option 2 for Condition 2 of Work Packages 1 and 2. Added 'Captain's' and
'First Officer's', where applicable, to agree with Paragraph 1.E., Compliance.
14. Appendix A and Appendix B; added Option 1 and Option 2 for Condition 2 of Work Packages 1 and 2
to logic diagrams, and corrected typographical errors. Added 'Captain's' and 'First Officer's', where
applicable, to agree with Paragraph 1.E., Compliance and Paragraph 3.B., Work Instructions.
15. Appendix C and Appendix D; added 'Captain's' and 'First Officer's', where applicable, to agree with
Paragraph 1.E., Compliance and Paragraph 3.B., Work Instructions.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
February 23, 2017Original Issue:
August 08, 2018Revision 1:
January 27, 2023Revision 2:
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
6 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 7

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 777-25-0619Original Issue: February 23, 2017
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats will have
un-commanded movement because of horizontal actuator shaft failure. If this service bulletin is not done, the
output shaft of the horizontal actuator on the Captain's and First Officer's seat(s) could break and cause an
un-commanded seat movement. Un-commanded seat movement could lead to reduced controllability of the
airplane.
A 777 operator reported that the Captain's seat could not be locked in position after horizontal seat position
adjustment in flight. The seat became unlocked from the track and moved freely forward and aft. Control was
given to the First Officer for approach and landing. An inspection found the horizontal actuator output shaft had
broken. When horizontal actuator output shaft breaks, the pilot cannot prevent seat movement in a forward and
aft direction and cannot lock the seat in position. A broken shaft is the result of high loads, that are more than
design limits, from a stalled motor that can occur due to high mechanical resistance to motion during powered
operation of the seat. Foreign Object Debris (FOD) in the seat tracks is another condition that can result in a
stalled motor and cause the horizontal actuator output shaft to break.
This service bulletin gives instructions to find the part number and 'amendment' of the horizontal actuator of the
Horizontal Movement System (HMS) of the Captain's and First Officer's seats. If the horizontal actuator has
Artus part number AD8650503 at 'Amendment B' or earlier or Artus part number AD8650502, corrective actions
are necessary by an off-airplane inspection of the seat by the applicable Ipeco service bulletin, where signs of
damage to the HMS make the replacement of the horizontal actuator necessary. If the actuator continues to be
Artus part number AD8650503 at 'Amendment B' or earlier or Artus part number AD8650502, repeat on-airplane
inspections are necessary for the Captain's and First Officer's seats by the applicable Ipeco service bulletin.
Installation of a horizontal actuator, Artus part number AD8650503 at 'Amendment C' or later, will significantly
decrease the risk of a broken horizontal actuator output shaft.
Boeing Service Related Problem (SRP) 777-SRP-25-0306 and 777-SRP-25-0418 are related to this service
bulletin.
Boeing Fleet Team Digest 777 FTD 25-12002 is related to this service bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
7 of 53

### Page 8

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
YesSpecial Tooling Required
ACTION (PRR 61777-278R, PRR 62777-99S)
Do inspections of the Captain's and First Officer's seats. Do corrective actions.
EFFECTIVITY
777-200, -200LR, -300, -300ER, and 777F Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of
affected airplanes.
Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-16-05 is related to this service bulletin.
The effective date of AD 2019-16-05 is October 8, 2019.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes, inspection and/or repair procedures
given in this service bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
8 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 9

MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
9 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 10 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
FIRST
OFFICER'S
SEAT
CAPTAIN'S
SEAT
DO INSPECTIONS OF THE CAPTAIN'S
AND FIRST OFFICER'S SEATS.
DO CORRECTIVE ACTIONS.
FWD
CAPTAIN'S SEAT  2385006
(FIRST OFFICER'S SEAT OPPOSITE)
Original Issue: February 23, 2017
Revision 2: January 27, 2023  777-25-0619
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  10 of 53

### Page 11

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-25-0619
Original Issue: February 23, 2017
Revision 2: January 27, 2023
ATA System: 2511
SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment Seats - Captain's and First Officer's
Seat - Horizontal Movement System Inspection and Overhaul
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line
number(s) 1-1566, 1568-1573, 1575-1580, 1582-1586, 1588-1604, 1606-1610, 1612-1614,
1616-1619, 1621-1623, 1625-1628, 1630-1632, 1634-1637, 1639-1641, 1643-1646, 1648-1650,
1652-1655, 1657-1658, 1660-1667, 1669, 1671, 1673, 1675-1676, 1678-1679, 1681, 1683-1684,
1686-1687, 1689-1715, 1717-1722, 1724-1727, 1729-1736, 1738-9999 in 1 Group(s). Where the
effectivity is presented with hyphens between line numbers, the airplane applicability means
"through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below. An
equivalent change is on subsequent production airplanes. Refer to PRR 61777-278R and PRR
62777-99S for data about this change.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
DESCRIPTIONCONFIGURATIONGROUP
777-200/200LR/300/300ER/777F Airplanes equipped with Ipeco
Captain's or First Officer's seats, series number 3A201 or 3A258.
-1
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
11 of 53

### Page 12

GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA093
1WA101 - WA104
1WA116 - WA119
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
1WA206 - WA212
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281 - WA283
1WA301 - WA304
1WB001 - WB021
1WB031 - WB046
1WB051 - WB088
1WB101 - WB106
1WB121 - WB125
1WB131 - WB148
1WB151 - WB155
1WB161 - WB177
1WB181 - WB194
1WB201 - WB215
1WB231 - WB247
1WB271 - WB273
1WB276 - WB286
1WB291 - WB302
1WB306 - WB307
1WB311 - WB337
1WB341 - WB342
1WB366 - WB368
GroupVariable Number
1WB371 - WB388
1WB406
1WB411 - WB413
1WB416 - WB439
1WB446 - WB453
1WB476
1WB481 - WB484
1WB501 - WB512
1WB531 - WB537
1WB551 - WB554
1WB591 - WB597
1WB601 - WB606
1WB611 - WB622
1WB631 - WB638
1WB646 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC120
1WC221 - WC224
1WC241 - WC243
1WC281 - WC290
1WC301 - WC308
1WC361 - WC364
1WC371 - WC374
1WC381 - WC395
1WC441
1WC446 - WC449
1WC456 - WC459
1WC486 - WC493
1WC506 - WC508
1WC521 - WC522
1WC531 - WC536
1WC546 - WC548
GroupVariable Number
1WC556
1WC566 - WC567
1WC571 - WC574
1WC581
1WC586 - WC587
1WC591 - WC595
1WD001 - WD002
1WD011 - WD018
1WD031 - WD036
1WD046 - WD055
1WD066 - WD075
1WD081 - WD089
1WD091
1WD096
1WD101 - WD106
1WD111 - WD112
1WD116 - WD117
1WD121 - WD123
1WD156
1WD501 - WD513
1WD521 - WD541
1WD546 - WD554
1WD561 - WD573
1WD581 - WD599
1WD606 - WD609
1WD621 - WD632
1WD651 - WD665
1WD671 - WD677
1WD691 - WD709
1WD741 - WD752
1WD761 - WD771
1WD786 - WD788
1WD796 - WD837
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
12 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 13

GroupVariable Number
1WD846 - WD867
1WD871 - WD918
1WD921 - WD957
1WD966 - WD970
1WD981 - WD982
1WD986 - WD987
1WD991 - WD996
1WE001 - WE007
1WE011 - WE012
1WE021 - WE026
1WE031 - WE040
1WE051 - WE057
1WE071 - WE078
1WE081 - WE084
1WE091 - WE095
1WE126 - WE178
1WE186 - WE219
1WE226 - WE231
1WE236 - WE253
1WE261 - WE267
1WE271 - WE278
1WE291 - WE298
1WE301 - WE320
1WE331 - WE356
1WE366 - WE368
1WE376 - WE377
1WE381
1WE386 - WE387
1WE391 - WE392
1WE396 - WE411
1WE416 - WE420
1WE426 - WE431
1WE436 - WE446
GroupVariable Number
1WE451 - WE484
1WE486 - WE493
1WE495 - WE499
1WE501 - WE504
1WE511 - WE516
1WE526 - WE528
1WE536 - WE549
1WE556 - WE573
1WE576 - WE587
1WE591
1WE601 - WE605
1WE626 - WE627
1WE631
1WE641 - WE642
1WE646 - WE647
1WE651 - WE661
1WE666 - WE677
1WE681 - WE689
1WE701 - WE705
1WE711 - WE712
1WE731 - WE732
1WE736 - WE740
1WE746 - WE772
1WE776 - WE786
1WE791 - WE792
1WE796 - WE798
1WE801 - WE806
1WE811 - WE812
1WE826 - WE828
1WE831 - WE835
1WE851 - WE853
1WE856 - WE857
1WE861 - WE863
GroupVariable Number
1WE866 - WE868
1WE871
1WF001 - WF004
1WF016 - WF043
1WF046 - WF077
1WF081 - WF088
1WF096 - WF101
1WF106 - WF109
1WF111 - WF124
1WF131 - WF144
1WF146 - WF147
1WF151 - WF152
1WF156 - WF173
1WF176 - WF184
1WF191
1WF201
1WF206 - WF217
1WF221 - WF228
1WF231 - WF248
1WF256 - WF258
1WF261 - WF262
1WF266 - WF288
1WF296
1WF301 - WF306
1WF311 - WF316
1WF321
1WF326 - WF329
1WF336 - WF345
1WF356
1WF366 - WF367
1WF371 - WF372
1WF376
1WF381
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
13 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 14

GroupVariable Number
1WF386
GroupVariable Number
--
GroupVariable Number
--
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
3A201-0007-01-1
3A201-0008-01-1
3A258-0041-01-1
3A258-0042-01-1
B. Concurrent Requirements
The service bulletin(s) listed below must be done at the same time as this service bulletin:
DescriptionService BulletinCompany
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 201-25-07, Issue 3 or Issue 4(a)(b)Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 201-25-08, Issue 4 or Issue 5 or
Issue 6(a)(b)
Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and adjust-
ment.
Ipeco SB 258-25-13, Issue 3 or Issue 4 or
Issue 5(c)(d)
Ipeco Holdings Ltd
Captain's and First Officer's seat horizontal
movement system inspection and overhaul.
Ipeco SB 258-25-14, Issue 4 or Issue 5(c)(d)Ipeco Holdings Ltd
(a) Applicable to Captain's seat part number 3A201-0007-01-1.
(b) Applicable to First Officer's seat part number 3A201-0008-01-1.
(c) Applicable to Captain's seat part number 3A258-0041-01-1.
(d) Applicable to First Officer's seat part number 3A258-0042-01-1.
C. Reason
Accomplishment of this service bulletin will decrease the risk that the Captain's and First Officer's seats
will have un-commanded movement because of horizontal actuator shaft failure. If this service bulletin
is not done, the output shaft of the horizontal actuator on the Captain's and First Officer's seat(s) could
break and cause an un-commanded seat movement. Un-commanded seat movement could lead to
reduced controllability of the airplane.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
14 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 15

A 777 operator reported that the Captain's seat could not be locked in position after horizontal seat
position adjustment in flight. The seat became unlocked from the track and moved freely forward and
aft. Control was given to the First Officer for approach and landing. An inspection found the horizontal
actuator output shaft had broken. When horizontal actuator output shaft breaks, the pilot cannot prevent
seat movement in a forward and aft direction and cannot lock the seat in position. A broken shaft is
the result of high loads, that are more than design limits, from a stalled motor that can occur due to
high mechanical resistance to motion during powered operation of the seat. Foreign Object Debris
(FOD) in the seat tracks is another condition that can result in a stalled motor and cause the horizontal
actuator output shaft to break.
This service bulletin gives instructions to find the part number and 'amendment' of the horizontal actuator
of the Horizontal Movement System (HMS) of the Captain's and First Officer's seats. If the horizontal
actuator has Artus part number AD8650503 at 'Amendment B' or earlier or Artus part number
AD8650502, corrective actions are necessary by an off-airplane inspection of the seat by the applicable
Ipeco service bulletin, where signs of damage to the HMS make the replacement of the horizontal
actuator necessary. If the actuator continues to be Artus part number AD8650503 at 'Amendment B'
or earlier or Artus part number AD8650502, repeat on-airplane inspections are necessary for the
Captain's and First Officer's seats by the applicable Ipeco service bulletin. Installation of a horizontal
actuator, Artus part number AD8650503 at 'Amendment C' or later, will significantly decrease the risk
of a broken horizontal actuator output shaft.
Boeing Service Related Problem (SRP) 777-SRP-25-0306 and 777-SRP-25-0418 are related to this
service bulletin.
Boeing Fleet Team Digest 777 FTD 25-12002 is related to this service bulletin.
Revision 1 was sent to add more information and to better describe the conditions of and the serviceable
definition for Ipeco pilot's seats. Also, the newest issue numbers of the Ipeco service bulletins, which
correct errors in their work instructions, are specified in this revision.
Revision 2 is sent to list a newer issue number for each concurrent supplier service bulletin and to add
an option to install a serviceable seat for Condition 2 of Work Packages 1 and 2.
D. Description
Do inspections of the Captain's and First Officer's seats. Do corrective actions.
Effects of Revision 2 on airplanes on which the Original Issue or Revision 1 was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212777-200, 777-200LR, 777-300,
777-300ER, 777F
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
15 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 16

E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-16-05 is related to this service
bulletin. The effective date of AD 2019-16-05 is October 8, 2019.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 thru 4, in
accordance with Paragraph 3. Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 36 months after the
Original Issue date of this ser-
vice bulletin.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
ACTUATOR IDENTIFICA-
TION.
All Airplanes.
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE HOR-
IZONTAL ACTUATOR IS
PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER -CONDITION 1 (ACTION2): No further action re-
quired. (a)
-Within 36 months after the
Original Issue date of this ser-
vice bulletin.
OPTION 1: Do PART 3:
CAPTAIN'S SEAT - HORI-
ZONTAL MOVEMENT
SYSTEM DETAILED IN-
SPECTION.
CONDITION 2: THE HOR-
IZONTAL ACTUATOR IS
NOT PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER, OR
THE HORIZONTAL ACTU-
ATOR PART NUMBER
AND AMENDMENT CAN-
NOT BE FOUND
-OPTION 2: Install a service-
able Captain's seat. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
16 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 17

Table 1: WORK PACKAGE 1 - CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE
'IPECO SERVICE BUL-
LETIN, PART A - INSPEC-
TION' IS PASSED (NO
FINDINGS) CONDITION 3 (ACTION2): Install the Captain's
seat.
Refer to Paragraph
1.E., Compliance,
Table 3.
-CONDITION 3 (ACTION
3): Do the repeat actions
in accordance with Work
Package 3.
-Before further flight.OPTION 1 (ACTION 1):
Install the removed seat
without power.
CONDITION 4: THE
'IPECO SERVICE BUL-
LETIN, PART A - INSPEC-
TION' IS NOT PASSED
(ANY FINDINGS) -Within 120 days after PART 3was done.OPTION 1 (ACTION 2): DoPART 7: CAPTAIN'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM OFF AIR-
PLANE OVERHAUL.
Refer to Paragraph
1.E., Compliance,
Table 3.
-OPTION 1 (ACTION 3): Do
the repeat actions in accor-
dance with Work Package
3.
-Before further flight.OPTION 2 (ACTION 1): Do
PART 7: CAPTAIN'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM OFF AIR-
PLANE OVERHAUL.
Refer to Paragraph
1.E., Compliance,
Table 3.
-OPTION 2 (ACTION 2): Do
the repeat actions in accor-
dance with Work Package
3.
-Before further flight.OPTION 3: Install a service-
able Captain's seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance with
this service bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
17 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 18

Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 36 months after the
Original Issue date of this ser-
vice bulletin.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL ACTUATOR IDENTI-
FICATION.
All Airplanes.
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE HOR-
IZONTAL ACTUATOR IS
PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER --CONDITION 1 (ACTION2): No further action re-
quired. (a)
-Within 36 months after the
Original Issue date of this ser-
vice bulletin.
OPTION 1: Do PART 4:
FIRST OFFICER'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM DE-
TAILED INSPECTION.
CONDITION 2: THE HOR-
IZONTAL ACTUATOR IS
NOT PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER, OR
THE HORIZONTAL ACTU-
ATOR PART NUMBER
AND AMENDMENT CAN-
NOT BE FOUND
-OPTION 2: Install a service-
able First Officer's seat. (a)
-Before further flight.CONDITION 3 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 3: THE
'IPECO SERVICE BUL-
LETIN, PART A - INSPEC-
TION' IS PASSED (NO
FINDINGS) CONDITION 3 (ACTION2): Install the First Officer's
seat.
Refer to Paragraph
1.E., Compliance,
Table 4.
-CONDITION 3 (ACTION
3): Do the repeat actions
in accordance with Work
Package 4.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
18 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 19

Table 2: WORK PACKAGE 2 - FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.OPTION 1 (ACTION 1):
Install the removed seat
without power.
CONDITION 4: THE
'IPECO SERVICE BUL-
LETIN, PART A - INSPEC-
TION' IS NOT PASSED
(ANY FINDINGS) -Within 120 days after PART 4was done.OPTION 1 (ACTION 2): DoPART 8: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL.
Refer to Paragraph
1.E., Compliance,
Table 4.
-OPTION 1 (ACTION 3): Do
the repeat actions in accor-
dance with Work Package
4.
-Before further flight.OPTION 2 (ACTION 1): Do
PART 8: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL MOVEMENT SYS-
TEM OFF AIRPLANE
OVERHAUL.
Refer to Paragraph
1.E., Compliance,
Table 4.
-OPTION 2 (ACTION 2): Do
the repeat actions in accor-
dance with Work Package
4.
-Before further flight.OPTION 3: Install a service-
able First Officer's seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the First Officer's seat in accordance
with this service bulletin.
Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDEN-
TIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
36 months. (a)Within 36 months after WORK
PACKAGE 1 was accomplished.
Do PART 1: CAPTAIN'S
SEAT - HORIZONTAL
ACTUATOR IDENTIFICA-
TION.
All Airplanes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
19 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 20

Table 3: WORK PACKAGE 3 - CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDEN-
TIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE HOR-
IZONTAL ACTUATOR IS
PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER CONDITION 1 (ACTION2): No further action re-
quired. (a)
-Before further flight.OPTION 1: Do PART 5:
CAPTAIN'S SEAT - HORI-
ZONTAL MOVEMENT
SYSTEM ON AIRPLANE
CHECKS AND CORREC-
TIVE ACTION.
CONDITION 2: THE HOR-
IZONTAL ACTUATOR IS
NOT PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER, OR
THE HORIZONTAL ACTU-
ATOR PART NUMBER
AND AMENDMENT CAN-
NOT BE FOUND
OPTION 2: Install a service-
able Captain's seat. (a)
(a) Terminating Action: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat in accordance with
this service bulletin.
Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
36 months. (a)Within 36 months after WORK
PACKAGE 2 was accomplished.
Do PART 2: FIRST OFFI-
CER'S SEAT - HORIZON-
TAL ACTUATOR IDENTI-
FICATION.
All Airplanes.
-Before further flight.CONDITION 1 (ACTION
1): Make sure the seat
tracks are clear of FOD.
CONDITION 1: THE HOR-
IZONTAL ACTUATOR IS
PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER CONDITION 1 (ACTION2): No further action re-
quired. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
20 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 21

Table 4: WORK PACKAGE 4 - FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.OPTION 1: Do PART 6:
FIRST OFFICER'S SEAT
- HORIZONTAL MOVE-
MENT SYSTEM ON AIR-
PLANE CHECKS AND
CORRECTIVE ACTION.
CONDITION 2: THE HOR-
IZONTAL ACTUATOR IS
NOT PART NUMBER
AD8650503 AT 'AMEND-
MENT C' OR LATER, OR
THE HORIZONTAL ACTU-
ATOR PART NUMBER
AND AMENDMENT CAN-
NOT BE FOUND
OPTION 2: Install a service-
able First Officer's seat. (a)
(a) Terminating Action: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the First Officer's seat in accordance
with this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA
approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were
based on the airplane in its original Boeing delivery configuration or as modified by other approved
Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the inspections
and checks, defined in SB 777-25-0619, Revision 2 as an alternative method of compliance to
accomplishing the inspections and checks, required by paragraphs (h) and (j) of AD 2019-16-05. All
provisions of AD 2019-16-05 that are not specifically referenced in the above statement remain fully
applicable and must be complied with accordingly.
G. Manpower
The tables below show an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
21 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 22

WORK PACKAGE 1: CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.250.251Open Access
0.250.251Find the Part Number and Amendment
of the Horizontal Actuator
0.200.201FIGURE 1
0.400.802Seat Removal
0.300.301Seat Power Adjustment System Deacti-
vation (a)
0.601.202Seat Installation
0.500.501Operational Test
0.250.251Close Access
(c)(c)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 1.
(b) Deleted.
(c) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
WORK PACKAGE 2: FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.250.251Open Access
0.250.251Find the Part Number and Amendment
of the Horizontal Actuator
0.200.201FIGURE 2
0.400.802Seat Removal
0.300.301Seat Power Adjustment System Deacti-
vation (a)
0.601.202Seat Installation
0.500.501Operational Test
0.250.251Close Access
(c)(c)TOTAL FOR EACH AIRPLANE
(a) Applicable to Condition 4 Option 1.
(b) Deleted.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
22 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 23

WORK PACKAGE 2: FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed
Hours
Task HoursNumber of
Persons
Task
(c) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
WORK PACKAGE 3: CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDEN-
TIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.250.251Open Access
0.250.251Find the Part Number and Amendment
of the Horizontal Actuator
0.200.201FIGURE 1
0.400.802Seat Removal (b)
0.601.202Seat Installation (b)
0.500.501Operational Test (b)
0.250.251Close Access
(c)(c)TOTAL FOR EACH AIRPLANE
(a) Deleted.
(b) Applicable to Condition 2 Option 2.
(c) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
WORK PACKAGE 4: FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.250.251Open Access
0.250.251Find the Part Number and Amendment
of the Horizontal Actuator
0.200.201FIGURE 2
0.400.802Seat Removal (b)
0.601.202Seat Installation (b)
0.500.501Operational Test (b)
0.250.251Close Access
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
23 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 24

WORK PACKAGE 4: FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
Elapsed
Hours
Task HoursNumber of
Persons
Task
(c)(c)TOTAL FOR EACH AIRPLANE
(a) Deleted.
(b) Applicable to Condition 2 Option 2.
(c) A total is not given as task usage is variable. Add the values of the applicable tasks
together to get the total.
The time to do the work in accordance with the applicable Ipeco service bulletin(s) is not included in
the manpower estimate.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 61777-278R, PRR 62777-99S
b. Boeing Service Related Problem (SRP) 777-SRP-25-0306, 777-SRP-25-0418
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2019-16-05
d. Service Bulletin Index D624W001
e. 777 Fleet Team Digest (FTD) 25-12002
f. 777 Aircraft Maintenance Manual (AMM) 25-11-00, 25-11-01
g. 777 Master Minimum Equipment List 25-11-01-01
h. Ipeco Component Maintenance Manual (CMM) 25-10-87, 25-11-38
i. Ipeco Service Bulletin 201-25-07, 201-25-08, 258-25-13, 258-25-14
NOTE: The supplier was told to send copies of each service bulletin to each operator.
2. Data Supplied with this Service Bulletin:
None.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
24 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 25

3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-11777 Maintenance Planning Document
11-31, 25-11777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
25 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 26

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
26 of 53
BOEING SERVICE BULLETIN 777-25-0619
BLANK PAGE

### Page 27

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. Refer to Ipeco SB 201-25-08 and Ipeco SB 258-25-14.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes, inspection and/or repair
procedures given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesExisting Ipeco Part Num-
ber
NameQTYIpeco Part Num-
ber / Specification
(a)(c)(d)(e)3A201-0007-01-1Seat Assy - Captain13A201-0007-01-1
(b)(c)(e)(f)3A258-0041-01-1Seat Assy - Captain3A258-0041-01-2
(a)(c)(d)(e)3A201-0008-01-1Seat Assy - First Officer13A201-0008-01-1
(b)(c)(e)(f)3A258-0042-01-1Seat Assy - First Officer3A258-0042-01-2
(a) Refer to Ipeco SB 201-25-08.
(b) Refer to Ipeco SB 258-25-14.
(c) This part is used in production.
(d) A new seat assembly must have the horizontal actuator, Artus part number AD8650503 (Ipeco part
number 2A258-0487), at 'Amendment C' or later.
(e) A new seat assembly is an alternative to the accomplishment of the applicable Ipeco service bulletin.
(f) This part number of new seat assembly has horizontal actuator, Artus part number AD8650503 (Ipeco
part number 2A258-0487), at 'Amendment C' or later, installed.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
27 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 28

NotesNew Ipeco Part
Number
NameQTYExisting Ipeco
Part Number
(a)(c)(d)3A201-0007-01-1ZSeat Assy - Captain13A201-0007-01-1
(b)(c)(d)3A258-0041-01-1ZSeat Assy - Captain3A258-0041-01-1
(a)(c)(d)3A201-0008-01-1ZSeat Assy - First Officer13A201-0008-01-1
(b)(c)(d)3A258-0042-01-1ZSeat Assy - First Officer3A258-0042-01-1
(a) Make the change in accordance with Ipeco SB 201-25-08.
(b) Make the change in accordance with Ipeco SB 258-25-14.
(c) The Captain's and First Officer's seat is only changed into the new part number if the hori-
zontal actuator AD8650503 at AMDT C or later, or part 2A258-0487 has been installed.
(d) This part is not used in production.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
Refer to Ipeco SB 201-25-08 and Ipeco SB 258-25-14.
E. Special Tooling - Price and Availability
Refer to Ipeco SB 201-25-08 and Ipeco SB 258-25-14.
F. Special Tooling Necessary to do this Service Bulletin
Refer to Ipeco SB 201-25-08 and Ipeco SB 258-25-14.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
28 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 29

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Each work package can be
completed independently during separate maintenance visits. Task hours and elapsed
hours for each work package are given in Paragraph 1.G., Manpower.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777-200/300/777F Structural
Repair Manual, Chapter 51.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Refer to APPENDIX A, APPENDIX B, APPENDIX C, and APPENDIX D for logic
diagram(s). Logic diagrams are provided as an aid only. Information contained in
Paragraph 1.E., Compliance is the primary source for compliance times. Information
in Paragraph 3.B., Work Instructions is the primary source for tasks required for
compliance.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
29 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 30

8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
11. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
12. The CONDITIONS, ACTIONS and OPTIONS shown apply to the Captain's and First
Officer's seats independently.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as "RC", including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt" then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
14. Horizontal actuator part number AD8650503 identified in the Paragraph 3.B., Work
Instructions is the Artus identity. This actuator may also be identified with Ipeco part
number 2A258-0487.
15. A serviceable Captain's seat in this service bulletin is defined as one with part number
3A258-0041-01-2, 3A258-0041-01-1Z or 3A201-0007-01-1Z, or as one with part
number 3A258-0041-01-1 that has a horizontal actuator with Artus part number
AD8650503 at 'Amendment C' or later, or as one with part number 3A201-0007-01-1
that has a horizontal actuator with Artus part number AD8650503 at 'Amendment C'
or later. Installation of a serviceable Captain's seat is a terminating action to the
repeat inspections in this service bulletin.
16. A serviceable First Officer's seat in this service bulletin is defined as one with part
number 3A258-0042-01-2, 3A258-0042-01-1Z or 3A201-0008-01-1Z, or as one with
part number 3A258-0042-01-1 that has a horizontal actuator with Artus part number
AD8650503 at 'Amendment C' or later, or as one with part number 3A201-0008-01-1
that has a horizontal actuator with Artus part number AD8650503 at 'Amendment C'
or later. Installation of a serviceable First Officer's seat is a terminating action to the
repeat inspections in this service bulletin.
17. Foreign Object Debris (FOD) in this service bulletin can include coins, tools, nuts,
bolts, a pen, or any object that can potentially impede seat movement.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
30 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 31

B. WORK INSTRUCTIONS
WORK PACKAGE 1: CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED
INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 1: CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION.
a. CONDITION 1: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 1 (ACTION 2): No further action required.
b. CONDITION 2: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND.
(1) OPTION 1: Do PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM
DETAILED INSPECTION.
(a) CONDITION 3: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 1.
2) CONDITION 3 (ACTION 2): Install the Captain's seat. Refer to 777 AMM
25-11-01 as an accepted procedure.
3) CONDITION 3 (ACTION 3): Do the repeat actions in accordance with Work
Package 3. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 4: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install the removed seat without power.
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat that has done PART 3. Refer to 777 AMM 25-11-01 as an
accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
777 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 7: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
31 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 32

a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
3. Refer to Paragraph 1.E., Compliance.
4) OPTION 2 (ACTION 1): Do PART 7: CAPTAIN'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
3. Refer to Paragraph 1.E., Compliance.
6) OPTION 3: Install a serviceable Captain's seat:
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
b) Install a serviceable seat. Refer to 777 AMM 25-11-01 as an accepted
procedure.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph
3.A., General Information, is a terminating action to the repeat
inspections for the Captain's seat in accordance with this service
bulletin.
(c) RC Exempt - Do the Flight Compartment Seats Operational Test. Refer to 777 AMM
25-11-00 as an accepted procedure.
(2) OPTION 2: Install a serviceable Captain's seat:
(a) Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(c) Install a serviceable seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the Captain's seat in accordance with this service bulletin.
(d) RC Exempt - Do the Flight Compartment Seats Operational Test. Refer to 777 AMM
25-11-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
WORK PACKAGE 2: FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION,
DETAILED INSPECTION AND OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
32 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 33

2. RC - Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION.
a. CONDITION 1: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 1 (ACTION 2): No further action required.
b. CONDITION 2: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 4: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM
DETAILED INSPECTION.
(a) CONDITION 3: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS
PASSED (NO FINDINGS)
1) CONDITION 3 (ACTION 1): Make sure the seat tracks are clear of FOD in
accordance with FIGURE 2.
2) CONDITION 3 (ACTION 2): Install the First Officer's seat. Refer to 777 AMM
25-11-01 as an accepted procedure.
3) CONDITION 3 (ACTION 3): Do the repeat actions in accordance with Work
Package 4. Refer to Paragraph 1.E., Compliance.
(b) CONDITION 4: THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT
PASSED (ANY FINDINGS)
1) OPTION 1 (ACTION 1): Install the removed seat without power.
Seat Installation and Deactivation
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat that has done PART 4. Refer to 777 AMM 25-11-01 as an
accepted procedure.
c) Deactivate the power adjustment system of the seat in accordance with
777 Master Minimum Equipment List (MMEL) 25-11-01-01.
2) OPTION 1 (ACTION 2): Do PART 8: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
3) OPTION 1 (ACTION 3): Do the repeat actions in accordance with Work Package
4. Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
33 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 34

4) OPTION 2 (ACTION 1): Do PART 8: FIRST OFFICER'S SEAT - HORIZONTAL
MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL.
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
5) OPTION 2 (ACTION 2): Do the repeat actions in accordance with Work Package
4. Refer to Paragraph 1.E., Compliance.
6) OPTION 3: Install a serviceable First Officer's seat:
a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
b) Install a serviceable seat. Refer to 777 AMM 25-11-01 as an accepted
procedure.
NOTE: Installation of a serviceable First Officer's seat as defined in
Paragraph 3.A., General Information, is a terminating action to the
repeat inspections for the First Officer's seat in accordance with
this service bulletin.
(c) RC Exempt - Do the Flight Compartment Seats Operational Test. Refer to 777 AMM
25-11-00 as an accepted procedure.
(2) OPTION 2: Install a serviceable First Officer's seat:
(a) Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(c) Install a serviceable seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the First Officer's seat in accordance with this service bulletin.
(d) RC Exempt - Do the Flight Compartment Seats Operational Test. Refer to 777 AMM
25-11-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
WORK PACKAGE 3: CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 1: CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION.
a. CONDITION 1: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
34 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 35

(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 1.
(2) CONDITION 1 (ACTION 2): No further action required.
b. CONDITION 2: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
(1) OPTION 1: Do PART 5: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON
AIRPLANE CHECKS AND CORRECTIVE ACTION.
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(b) Do the repeat actions in accordance with Work Package 3. Refer to Paragraph 1.E.,
Compliance.
(2) OPTION 2: Install a serviceable Captain's seat:
(a) Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 1.
(c) Install a serviceable seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the Captain's seat in accordance with this service bulletin.
(d) RC Exempt - Do the Flight Compartment Seats Operational Test. Refer to 777 AMM
25-11-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
WORK PACKAGE 4: FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR
IDENTIFICATION AND CHECK OF THE HORIZONTAL MOVEMENT SYSTEM
1. Get access to the flight compartment.
2. RC - Do PART 2: FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION.
a. CONDITION 1: THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
(1) CONDITION 1 (ACTION 1): Make sure the seat tracks are clear of FOD in accordance
with FIGURE 2.
(2) CONDITION 1 (ACTION 2): No further action required.
b. CONDITION 2: THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART NUMBER AND
AMENDMENT CANNOT BE FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
35 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 36

(1) OPTION 1: Do PART 6: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM
ON AIRPLANE CHECKS AND CORRECTIVE ACTION.
(a) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(b) Do the repeat actions in accordance with Work Package 4. Refer to Paragraph 1.E.,
Compliance.
(2) OPTION 2: Install a serviceable First Officer's seat:
(a) Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
(b) Make sure the seat tracks are clear of FOD in accordance with FIGURE 2.
(c) Install a serviceable seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A.,
General Information, is a terminating action to the repeat inspections for
the First Officer's seat in accordance with this service bulletin.
(d) RC Exempt - Do the Flight Compartment Seats Operational Test. Refer to 777 AMM
25-11-00 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
PART 1: CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION
1. Find the Artus part number and amendment of the horizontal actuator that is installed on the seat.
a. Captain's seat part numbers 3A258-0041-01-2, 3A258-0041-01-1Z and 3A201-0007-01-1Z
have a horizontal actuator with Artus part number AD8650503 at 'Amendment C' or later. For
Captain's seats with other part numbers, maintenance records can be used if the part number
and amendment of the horizontal actuator can be identified. If maintenance records are not
available or the part number and 'amendment' of the horizonal actuator cannot be identified
from maintenance records, inspect the horizontal actuator installed on the seat to find its part
number and amendment. Refer to APPENDIX E.
NOTE: Installation of a serviceable Captain's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the Captain's seat
in accordance with this service bulletin.
PART 2: FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION
1. Find the Artus part number and amendment of the horizontal actuator that is installed on the seat.
a. First Officer's seat part numbers 3A258-0042-01-2, 3A258-0042-01-1Z and 3A201-0008-01-1Z
have a horizontal actuator with Artus part number AD8650503 at 'Amendment C' or later. For
First Officer's seats with other part numbers, maintenance records can be used if the part
number and Amendment can be identified. If maintenance records are not available or the
part number and Amendment cannot be identified from maintenance records, inspect to find
the part number and Amendment of the horizontal actuator installed on the seat. Refer to
APPENDIX E.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
36 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 37

NOTE: Installation of a serviceable First Officer's seat as defined in Paragraph 3.A., General
Information, is a terminating action to the repeat inspections for the First Officer's
seat in accordance with this service bulletin.
PART 3: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 201-25-08(a)S232W311-13A201-0007-01-1
Ipeco SB 258-25-14(a)S232T311-1033A258-0041-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 4: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED INSPECTION
1. RC Exempt - Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
NOTE: Some of the inspections detailed in the Ipeco service bulletins do not require the seat to
be removed.
2. Do the detailed inspections from the 'Ipeco service bulletin Part A - Inspection' for findings specified
in, and in accordance with the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 201-25-08(a)S232W311-23A201-0008-01-1
Ipeco SB 258-25-14(a)S232T311-1043A258-0042-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 5: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS AND
CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 201-25-07(a)S232W311-13A201-0007-01-1
Ipeco SB 258-25-13(a)S232T311-1033A258-0041-01-1
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
37 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 38

IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 6: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE CHECKS
AND CORRECTIVE ACTION
1. Do the checks and applicable corrective actions in accordance with the applicable Ipeco service
bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 201-25-07(a)S232W311-23A201-0008-01-1
Ipeco SB 258-25-13(a)S232T311-1043A258-0042-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 7: CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE OVERHAUL
1. Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 201-25-08(a)S232W311-13A201-0007-01-1
Ipeco SB 258-25-14(a)S232T311-1033A258-0041-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
PART 8: FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM OFF AIRPLANE
OVERHAUL
1. Remove seat. Refer to 777 AMM 25-11-01 as an accepted procedure.
2. Do the applicable Ipeco service bulletin in the table below, for the seat:
IPECO SERVICE BULLETINBOEING PART NUMBERIPECO PART NUMBER
Ipeco SB 201-25-08(a)S232W311-23A201-0008-01-1
Ipeco SB 258-25-14(a)S232T311-1043A258-0042-01-1
(a) In accordance with the applicable Ipeco service bulletin version listed in Paragraph 1.B., Concurrent Re-
quirements.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2: January 27, 2023
38 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 39 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
FWD
CAPTAIN'S SEAT  2538934
(TYPICAL)
(LEFT SIDE VIEW)
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 1 OF 2)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  Export Controlled ECCN: 9E991  777-25-0619
Copyright © Unpublished Work - See page 1 for details.  39 of 53

### Page 40

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD. Refer to 777
AMM 25-11-01 as
an accepted proce-
dure.
--FODRemove1
FIGURE 1: FLIGHT COMPARTMENT - CAPTAIN'S SEAT TRACKS - FOREIGN OBJECT DEBRIS - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
40 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 41 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
FWD
FIRST OFFICER'S SEAT  (TYPICAL)  2538936
(LEFT SIDE VIEW)
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 1 OF 2)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  777-25-0619
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  41 01 53

### Page 42

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
Make sure the seat
tracks are clear of
FOD. Refer to 777
AMM 25-11-01 as
an accepted proce-
dure.
--FODRemove1
FIGURE 2: FLIGHT COMPARTMENT - FIRST OFFICER'S SEAT TRACKS - FOREIGN OBJECT DEBRIS -
REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
42 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 43

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATIONPART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED IN-
SPECTION
PART 3
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 1
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 2
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
CONDITION 3
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
CONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagrams.
DescriptionFlag Note Letter
Terminating Action: Installation of a serviceable Captain's seat as defined in
Paragraph 3.A., General Information, is a terminating action to the repeat in-
spections for the Captain's seat in accordance with this service bulletin.
(a)
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
43 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 44 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER  WITHIN 36 MONTHS AFTER THE
FLIGHT  ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACK
IS CLEAR OF FOD  OPTION 1:  OPTION 2:
DO PART 3  INSTALL A
SERVICEABLE
CONDITION 1 (ACTION 2):  CAPTAIN'S SEAT
NO FURTHER ACTION
a)  REQUIRED
CONDITION 3  CONDITION 4
BEFORE FURTHER
FLIGHT
CONDITION 3 (ACTION 1):
MAKE SURE THE SEAT TRACK
IS CLEAR OF FOD
CONDITION 3 (ACTION 2):
INSTALL THE CAPTAIN'S SEAT
CONDITION 3 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK
PACKAGE 3  2539142
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 3)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  Export Controlled ECCN: 9E991  777-25-0619
Copyright © Unpublished Work - See page 1 for details.  44 of 53

### Page 45 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  INSTALL SEAT  OPTION 2 (ACTION 1):  INSTALL A SERVICEABLE  OPTION 3:
WITHOUT POWER  DO PART 7  CAPTAIN'S SEAT
(a)
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 3  DO THE REPEAT ACTIONS
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 3
OPTION 1 (ACTION 2):
DO PART 7
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 3  2539146
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: WORK PACKAGE 1
- CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND OVERHAUL
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 3 OF 3)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  777-25-0619
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  45 of 53

### Page 46

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATIONPART 2
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM DETAILED
INSPECTION
PART 4
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 1
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 2
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS PASSED (NO
FINDINGS)
CONDITION 3
THE 'IPECO SERVICE BULLETIN, PART A - INSPECTION' IS NOT PASSED
(ANY FINDINGS)
CONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagrams.
DescriptionFlag Note Letter
Terminating Action: Installation of a serviceable First Officer's seat as defined
in Paragraph 3.A., General Information, is a terminating action to the repeat
inspections for the First Officer's seat in accordance with this service bulletin.
(a)
APPENDIX B:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2
- FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND
OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
46 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 47 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 2
CONDITION 1  CONDITION 2
BEFORE FURTHER  WITHIN 36 MONTHS AFTER THE
FLIGHT  ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACK
IS CLEAR OF FOD  OPTION 1:  OPTION 2:
DO PART 4  INSTALL A
SERVICEABLE FIRST
CONDITION 1 (ACTION 2):  OFFICER'S SEAT
NO FURTHER ACTION
(a)  REQUIRED
CONDITION 3  CONDITION 4
BEFORE FURTHER
FLIGHT
CONDITION 3 (ACTION 1):
MAKE SURE THE SEAT TRACK
IS CLEAR OF FOD
CONDITION 3 (ACTION 2):
INSTALL THE FIRST
OFFICER'S SEAT
CONDITION 3 (ACTION 3):
DO THE REPEAT ACTIONS IN
ACCORDANCE WITH WORK  2539143
PACKAGE 4
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2
- FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND
OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 3)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  Export Controlled ECCN: 9E991  777-25-0619
Copyright © Unpublished Work - See page 1 for details.  47 of 53

### Page 48 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
BEFORE FURTHER
FLIGHT
OPTION 1 (ACTION 1):  OPTION 3:
INSTALL SEAT  OPTION 2 (ACTION 1):  INSTALL A SERVICEABLE
WITHOUT POWER  DO PART 8  FIRST OFFICER'S SEAT
(a) →
WITHIN 120 DAYS  OPTION 2 (ACTION 2):
AFTER PART 4  DO THE REPEAT ACTIONS
WAS DONE  IN ACCORDANCE WITH
WORK PACKAGE 4
OPTION 1 (ACTION 2):
DO PART 8
OPTION 1 (ACTION 3):
DO THE REPEAT ACTIONS
IN ACCORDANCE WITH
WORK PACKAGE 4  2539144
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: WORK PACKAGE 2
- FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATION, DETAILED INSPECTION AND
OVERHAUL OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 3 OF 3)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  Export Controlled ECCN: 9E991  777-25-0619
Copyright © Unpublished Work - See page 1 for details.  48 of 53

### Page 49

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CAPTAIN'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATIONPART 1
CAPTAIN'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIRPLANE
CHECKS AND CORRECTIVE ACTION
PART 5
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 1
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 2
2. The table below gives the description for the flag notes called out in the logic diagrams.
DescriptionFlag Note Letter
Terminating Action: Installation of a serviceable Captain's seat as defined in
Paragraph 3.A., General Information, is a terminating action to the repeat in-
spections for the Captain's seat in accordance with this service bulletin.
(a)
APPENDIX C:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3
- CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND CHECK OF
THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
49 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 50 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
WITHIN 36 MONTHS AFTER
WORK PACKAGE 1 WAS
ACCOMPLISHED
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER  BEFORE FURTHER
FLIGHT  FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACK  OPTION 1:  OPTION 2:
IS CLEAR OF FOD  DO PART 5  INSTALL A
SERVICEABLE
CAPTAIN'S SEAT
CONDITION 1 (ACTION 2):
NO FURTHER ACTION
REQUIRED  NOT TO EXCEED
36 MONTHS  2556128
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: WORK PACKAGE 3
- CAPTAIN'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND CHECK OF
THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 2)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  Export Controlled ECCN: 9E991  777-25-0619
Copyright © Unpublished Work - See page 1 for details.  50 of 53

### Page 51

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FIRST OFFICER'S SEAT - HORIZONTAL ACTUATOR IDENTIFICATIONPART 2
FIRST OFFICER'S SEAT - HORIZONTAL MOVEMENT SYSTEM ON AIR-
PLANE CHECKS AND CORRECTIVE ACTION
PART 6
THE HORIZONTAL ACTUATOR IS PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER
CONDITION 1
THE HORIZONTAL ACTUATOR IS NOT PART NUMBER AD8650503 AT
'AMENDMENT C' OR LATER, OR THE HORIZONTAL ACTUATOR PART
NUMBER AND AMENDMENT CANNOT BE FOUND
CONDITION 2
2. The table below gives the description for the flag notes called out in the logic diagrams.
DescriptionFlag Note Letter
Terminating Action: Installation of a serviceable First Officer's seat as defined
in Paragraph 3.A., General Information, is a terminating action to the repeat
inspections for the First Officer's seat in accordance with this service bulletin.
(a)
APPENDIX D:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4
- FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND CHECK
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
51 of 53
BOEING SERVICE BULLETIN 777-25-0619

### Page 52 (OCR)

BOEING SERVICE BULLETIN 777-25-0619
WITHIN 36 MONTHS AFTER
WORK PACKAGE 2 WAS
ACCOMPLISHED
DO PART 2
CONDITION 1  CONDITION 2
BEFORE FURTHER  BEFORE FURTHER
FLIGHT  FLIGHT
CONDITION 1 (ACTION 1):
MAKE SURE THE SEAT TRACK  OPTION 1:  OPTION 2:
IS CLEAR OF FOD  DO PART 6  INSTALL A
SERVICEABLE FIRST
OFFICER'S SEAT
CONDITION 1 (ACTION 2):
NO FURTHER ACTION
REQUIRED  NOT TO EXCEED
36 MONTHS
2556129
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: WORK PACKAGE 4
- FIRST OFFICER'S SEAT - REPEAT ACTIONS - HORIZONTAL ACTUATOR IDENTIFICATION AND CHECK
OF THE HORIZONTAL MOVEMENT SYSTEM
(SHEET 2 OF 2)
Original Issue: February 23, 2017
Revision 2 January 27, 2023  Export Controlled ECCN: 9E991  777-25-0619
Copyright © Unpublished Work - See page 1 for details.  52 of 53

### Page 53

Refer to Ipeco Component Maintenance Manual (CMM) 25-10-87 and 25-11-38.
Refer to Ipeco SB 201-25-08 and Ipeco SB 258-25-14.
APPENDIX E:  CAPTAIN'S AND FIRST OFFICER'S SEATS HORIZONTAL MOVEMENT SYSTEM -
HORIZONTAL ACTUATOR - LOCATION
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 23, 2017
777-25-0619Revision 2 January 27, 2023
53 of 53
BOEING SERVICE BULLETIN 777-25-0619

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
