# Boeing Special Attention Service Bulletin 777-30-0012: Revision 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0274, the docket of AD 2010-15-01. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 777-30-0012](https://openairdocs.org/service-documents/boeing/sb-777-30-0012.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin (477)
- Pages: 47
- PDF: https://openairdocs.org/files/sha256/d1/17/d117ec85afdf81b32ba227877ea882ee561941c01191901e04c340bdb48f0ed2
- Page: https://openairdocs.org/service-documents/boeing/sb-777-30-0012/file/d117ec85afdf

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 47
 
 
 
Commercial
Airplane
Group 777
SPECIAL ATTENTION
Service Bulletin
Number: 777-30-0012
Date: April 07, 2004
Revision 2: December 19, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Ice - Number 1 Left 
and Right Window Replacement and Wire Changes
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2004 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10, 
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or 
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document 
or otherwise.

### Page 2

BLANK PAGE
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
BLANK PAGE

### Page 3

Table of Contents
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
Table of Contents
Revision Transmittal Sheet .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  15
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  18
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  19
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  20
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  20
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  21
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  23
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  26
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   27
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  27
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  29
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  29
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
FIGURE  1: CUT THE BULB SEAL FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW  34
FIGURE  2: WIRING CHANGE FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW   .  .  36
FIGURE  3: CUT THE BULB SEAL FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW39
FIGURE  4: WIRING CHANGE FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW.  .  41
FIGURE  5: INSPECTION OF AN ELECTRICAL CONNECTION ON THE LEFT NUMBER 1 WINDOW 44
FIGURE  6: INSPECTION OF AN ELECTRICAL CONNECTION ON THE RIGHT NUMBER 1 WINDOW  .
46

### Page 4

Table of Contents
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
BLANK PAGE

### Page 5

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 47
 
 
 
Commercial
Airplane
Group 777
SPECIAL ATTENTION
Service Bulletin
Number: 777-30-0012 Revision Transmittal Sheet
Date: April 07, 2004
Revision 2: December 19, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Ice - Number 1 Left 
and Right Window Replacement and Wire Changes
This Revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed as shown in the original issue or Revision 1 of this service 
bulletin. This revision is sent to change the No.1 Windshield Assembly part numbers supplied in the Top Kits.
REASON FOR REVISION
These sections were changed:
1. In Planning Information 1.J., Standard Overhaul Practices Manual (SOPM) reference 20-50-10 and Boeing 
Service Bulletin reference 777-56-0002 have been added to existing data.
2. In Material Information 2.A., Material Price and Availability, the Price and Rolt information has been 
updated.
3. In Material Information 2.C., Parts Necessary For Each Airplane, the No.1 Windshield Assembly part 
numbers been have changed.
4. In Material Information 2.E., Special Tooling - Pricing and Availability, the Tool Kit price has been updated.
5. In Accomplishment Instructions 3.B., Work Instructions, Work Package 1, the circuit breaker tables have 
been changes to open and close the circuit breakers for the left number 1 window.
6. In Accomplishment Instructions 3.B., Work Instructions, Work Package 2, the circuit breaker tables have 
been changes to open and close the circuit breakers for the right number 1 window.
7. In Accomplishment Instructions 3.B., Work Instructions, step 5 of Work Package 3 and Work Package 4, 
the No.1 Windshield Assembly part numbers have changed.  
8. In Figure 1, a new step has been added to the step table to part mark the glareshield.
9. In Figure 3, a new step has been added to the step table to part mark the glareshield.

### Page 6

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
Paragraph 1.A., Effectivity, shows changes of airplane operators.  Each operator should examine the Effectivity 
paragraph for changes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location 
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
Original Issue: April 07, 2004
Revision 1: June 02, 2006
Revision 2: December 19, 
2007

### Page 7

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 47
 
 
 
Commercial
Airplane
Group 777
SPECIAL ATTENTION
Service Bulletin
Number: 777-30-0012 Summary
Date: April 07, 2004
Revision 2: December 19, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Ice - Number 1 Left 
and Right Window Replacement and Wire Changes
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None
BACKGROUND
This service bulletin gives instructions to do an inspection in the flight compartment of an electrical connection 
on the left and the right number 1 windows.  Instructions are also given to replace the windows and make 
changes to their related wire bundles.  A new design window is available that uses a different electrical 
connection.
Boeing received nine reports from eight operators of electrical arcs at the terminal blocks of the flight 
compartment windows.  More than one of these reports included data to show that the results of the arcs were 
open flame incidents.  One operator found an indication of damage at a terminal and tightened a loose 
connection.  The terminal had internal damage that could not be seen.  Less than six months after it was 
tightened there was a report from the operator of an open flame incident on the same windshield.
The electrical connections on the windows are made with lugs that are attached with screws.  All of the windows 
in the flight compartment are electrically heated.  The number 1 windows get a much larger electrical load.   
An investigation found that the cause of the electrical arcs is loose terminal connections.  A loose connection 
increases the heat at the terminal which can cause damage to the internal solder joint.  Damaged solder joints 
are the primary cause for the electrical arcs.  The primary causes of loose connections are the incorrect torque 
of the screw or an incorrectly installed screw.
The inspection given in this service bulletin is to look for damage or a loose electrical connection on the 
windshield.  If there are indications of electrical arcs or damage to the electrical connection, the windshield is 
replaced.  If there is a loose electrical connection, the correct torque is applied to tighten it.  If a connection 
cannot be tightened to the correct torque, the windshield is replaced.  When a windshield with an electrical 
connection that uses pins and sockets is installed, the related wire bundle on the airplane is changed.

### Page 8

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 47
 
 
When the changes given in this bulletin are done, the number 1 windows will have better electrical connections.  
The new connections are made with pins and sockets.  The pin and socket connections will prevent the risk of 
electrical arcs as a result of loose connections.
Boeing Service Related Problem (SRP) 777-SRP-56-0015 is related to this service bulletin.
ACTION (PRR 62777-28S)
In the flight compartment, do an inspection of the J5 terminal on the left and the right number 1 windows.  
Replace number 1 windows that use screws and lugs for the electrical connections with a window that uses pins 
and sockets for the electrical connections.  Cut the bulb seal to give clearance for terminals on the new 
windshield.  Change the related wire bundle.
EFFECTIVITY
Refer to service bulletin Paragraph 1.A.1 for effectivity.
COMPLIANCE
See Service Bulletin Paragraph 1.E. for compliance information.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Work Package Total Task Hours Elapsed Hours
Work Package 1 0.25 0.25
Work Package 2 0.25 0.25
Work Package 3 8.5 4.75
Work Package 4 8.5 4.75

### Page 9

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
WORK PACKAGE 4:
CUT THE BULB SEAL.
REPLACE THE RIGHT NUMBER 1 WINDOW.
CHANGE THE RELATED WIRING.
NUMBER 1 WINDOW.
INSPECT THE RIGHT
WORK PACKAGE 2:
INSPECT THE LEFT NUMBER 1 WINDOW.
WORK PACKAGE 1:
WORK PACKAGE 3:
CUT THE BULB SEAL.
REPLACE THE LEFT NUMBER 1 WINDOW.
CHANGE THE RELATED WIRING.
363654

### Page 10

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
BLANK PAGE

### Page 11

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 47
 
 
 
Commercial
Airplane
Group 777
SPECIAL ATTENTION
Service Bulletin
Number: 777-30-0012
Date: April 07, 2004
Revision 2: December 19, 2007
ATA System: 3041 5611
SUBJECT: ICE AND RAIN PROTECTION - Flight Compartment Window Anti-Ice - Number 1 Left 
and Right Window Replacement and Wire Changes
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.  An equivalent change is on subsequent 
production airplanes.  Refer to PRR 62777-28 for data about this change.
Airplane models:
777-200 777-300
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AEROMEXICO  (AMX)
1W B 3 4 1
AIR AUSTRAL  (AUX)
1 WB366–WB367
AIR CHINA  (BEJ)
1 WA241–WA250
AIR FRANCE  (AFA)
1 WB311–WB335
GROUP CONFIGURATION DESCRIPTION
1 - Airplanes  that have number 1 windows with 
lugs and screws for the electrical connections.

### Page 12

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
AIR INDIA  (AIN)
1 WA007 WB058–WB059 WB070
AIRCRAFT MARKETING LTD.  (CFK)
1 WA079–WA080
ALITALIA  (ALI)
1 WC281–WC289
ALL NIPPON AIRWAYS  (ANA)
1 WA131–WA137 WA221–WA223 WA231–WA232 WB481–WB484
WB531–WB537
AMERICAN AIRLINES  (AAL)
1 WB416–WB437 WC051–WC073
ASIANA AIRLINES  (AAR)
1 WC111–WC114
AUSTRIAN  (AUL)
1 WB271–WB273
BRITISH AIRWAYS  (BAB)
1 WA076–WA078 WB001–WB021 WB031–WB046 WB411–WB413
CATHAY PACIFIC AIRWAYS  (CAT)
1 WA001 WA101–WA104 WB501–WB510
CHINA SOUTHERN AIRLINES  (GUN)
1 WA116–WA119 WB121–WB125
CONTINENTAL AIRLINES  (CAL)
1 WB371–WB388
DELTA AIR LINES  (DAL)
1 WB446–WB453
EGYPTAIR  (EGP)
1 WB151–WB155
EL AL ISRAEL AIRLINES  (ELA)
1 WC101–WC104
EMIRATES  (EAD)
1 WA196–WA198 WB101–WB106 WB631–WB638 WB646–WB649
ILFC  (ILF)
1W B 3 4 2
JAL INTERNATIONAL  (JAL)
1 WA171–WA175 WA206–WA212 WA281 WB591–WB597
WC241–WC243 WC301–WC303

### Page 13

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
KLM - ROYAL DUTCH AIRLINES  (KLM)
1 WC381–WC385
KOREAN AIR  (KAL)
1 WB131–WB139 WB551–WB554
KUWAIT AIRWAYS  (KUW)
1 WB306–WB307
MALAYSIA AIRLINES  (MAS)
1 WB161–WB175
MID EAST JET  (SKL)
1W B 4 0 6
PAKISTAN INT'L AIRLINES  (PIA)
1 WC446–WC447
ROYAL BRUNEI AIRLINES  (RBA)
1 WB072–WB073
SAUDI ARABIAN AIRLINES  (SVA)
1 WB276–WB286 WB291–WB302
SAUDI OGER  (SAO)
1W B 4 7 6
SINGAPORE AIRLINES  (SIA)
1 WB181–WB192 WB201–WB214 WB231–WB247 WB611–WB618
THAI AIRWAYS INTERNATIONAL  (TII)
1 WA086–WA093 WB601–WB606
UNITED AIRLINES  (UAL)
1 WA002–WA006 WA009–WA010 WA012–WA017 WA261–WA266
WB051–WB057 WB060–WB069 WB071 WB074–WB088
VARIG AIRLINES  (VAR)
1W A 0 0 8 W A 0 1 1
VIETNAM AIRLINES  (VIE)
1 WB336–WB337 WC361–WC362 WC371–WC372
IDENTIFICATION BY VARIABLE NUMBER
Variable  Group
WA001–WA017 1
WA076–WA080 1
WA086–WA093 1
WA101–WA104 1
WA116–WA119 1

### Page 14

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
WA131–WA137 1
WA171–WA175 1
WA196–WA198 1
WA206–WA212 1
WA221–WA223 1
WA231–WA232 1
WA241–WA250 1
WA261–WA266 1
WA281 1
WB001–WB021 1
WB031–WB046 1
WB051–WB088 1
WB101–WB106 1
WB121–WB125 1
WB131–WB139 1
WB151–WB155 1
WB161–WB175 1
WB181–WB192 1
WB201–WB214 1
WB231–WB247 1
WB271–WB273 1
WB276–WB286 1
WB291–WB302 1
WB306–WB307 1
WB311–WB337 1
WB341–WB342 1
WB366–WB367 1
WB371–WB388 1
WB406 1
WB411–WB413 1
WB416–WB437 1
WB446–WB453 1
WB476 1
WB481–WB484 1
WB501–WB510 1
WB531–WB537 1
WB551–WB554 1
WB591–WB597 1
WB601–WB606 1
Variable  Group

### Page 15

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts 
Necessary for Each Airplane.  If any parts or components are found, refer to Paragraph 2.C. for 
the recommended use.
B. Concurrent Requirements
None
C. Reason
This service bulletin gives instructions to do an inspection in the flight compartment of an electrical 
connection on the left and the right number 1 windows.  Instructions are also given to replace the 
windows and make changes to their related wire bundles.  A new design window is available that uses 
a different electrical connection.
Boeing received nine reports from eight operators of electrical arcs at the terminal blocks of the flight 
compartment windows.  More than one of these reports included data to show that the results of the 
arcs were open flame incidents.  One operator found an indication of damage at a terminal and 
tightened a loose connection.    The terminal had internal damage that could not be seen.  Less than 
six months after it was tightened there was a report from the operator of an open flame incident on the 
same windshield.
The electrical connections on the windows are made with lugs that are attached with screws.  All of 
the windows in the flight compartment are electrically heated.  The number 1 windows get a much 
larger electrical load.   
An investigation found that the cause of the electrical arcs is loose terminal connections.  A loose 
connection increases the heat at the terminal which can cause damage to the internal solder joint.  
Damaged solder joints are the primary cause for the electrical arcs.  The primary causes of loose 
connections are the incorrect torque of the screw or an incorrectly installed screw.
WB611–WB618 1
WB631–WB638 1
WB646–WB649 1
WC051–WC073 1
WC101–WC104 1
WC111–WC114 1
WC241–WC243 1
WC281–WC289 1
WC301–WC303 1
WC361–WC362 1
WC371–WC372 1
WC381–WC385 1
WC446–WC447 1
Variable  Group

### Page 16

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The inspection given in this service bulletin is to look for damage or a loose electrical connection on 
the windshield.  If there are indications of electrical arcs or damage to the electrical connection, the 
windshield is replaced.  If there is a loose electrical connection, the correct torque is applied to tighten 
it.  If a connection cannot be tightened to the correct torque, the windshield is replaced.  When a 
windshield with an electrical connection that uses pins and sockets is installed, the related wire bundle 
on the airplane is changed.
When the changes given in this bulletin are done, the number 1 windows will have better electrical 
connections.  The new connections are made with pins and sockets.  The pin and socket connections 
will prevent the risk of electrical arcs as a result of loose connections.
Boeing Service Related Problem (SRP) 777-SRP-56-0015 is related to this service bulletin.
Revision 1 is sent to add an inspection and new top kits.
The new inspection is in the flight compartment on an electrical connection of the left and the right 
number 1 windows.  The number 1 window can be used if it passes the inspection.  A window that 
does not pass the inspection can be replaced with the same type window.  There is a time limit on how 
long the old number 1 windows can be used.
The top kit in the initial release of this bulletin only had the kits for the wiring changes.  When the wiring 
changes are done, it is necessary to install a window that includes the correct electrical connections.  
New top kits are offered for the left and the right side.  Each kit includes a wire kit and a number 1 
window. This makes it easy for operators to get only the top kit for the side that is changed.  There can 
be a span of eight years from the replacement of one window until the replacement of the other 
window 
The Background and Reason sections have been changed.  More data is given.  
The Compliance sections are revised to include tables for compliance time.  The inspection 
compliance time is new in this revision to the bulletin.
A tool for the removal and installation of the number 1 window is added to the applicable sections.  It 
is shown in the Special Tooling section and in the Accomplishment Instructions 
Work Packages 1 and 2 are changed to Work Packages 3 and 4.  New Work Packages 1 and 2 are 
added for the inspections.  Figure 5 is added for the new Work Package 1.  Figure 6 is added for the 
new Work Package 2.
The Figures 2 and 4 did not include equipment identification in the wire routing illustration.  The wire 
schematics were not correct. The instructions were not clear.  The Figures in this revision show the 
necessary information more clearly.
The tests in the original issue of this bulletin contained errors.  There were more tests in the 
instructions than were necessary.  The tests referred to test equipment that was not necessary.   
Instructions were also given to do the tests given in the maintenance manual.  The tests and the 
special test equipment that are not necessary are removed in Revision 1.

### Page 17

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 47
 
 
 Revision 2 is sent to change the No.1 Windshield Assembly part numbers supplied in the Top Kits.
These sections were changed:
1. In Planning Information 1.J., Standard Overhaul Practices Manual (SOPM) reference 20-50-10 
and Boeing Service Bulletin reference 777-56-0002 have been added to existing data.
2. In Material Information 2.A., Material Price and Availability, the Price and Rolt information has 
been updated.
3. In Material Information 2.C., Parts Necessary For Each Airplane, the No.1 Windshield Assembly 
part numbers have changed.
4. In Material Information 2.E., Special Tooling - Pricing and Availability, the Tool Kit price has been 
updated.
5. In Accomplishment Instructions 3.B., Work Instructions, Work Package 1, the circuit breaker 
tables have been changes to open and close the circuit breakers for the left number 1 window.
6. In Accomplishment Instructions 3.B., Work Instructions, Work Package 2, the circuit breaker 
tables have been changes to open and close the circuit breakers for the right number 1 window.
7. In Accomplishment Instructions 3.B., Work Instructions, step 5 of Work Package 3 and Work 
Package 4, the No.1 Windshield Assembly part numbers have been changed.  
8. In Figure 1, a new step has been added to the step table to part mark the glareshield.
9. In Figure 3, a new step has been added to the step table to part mark the glareshield.
D. Description
In the flight compartment, an inspection is done of the left and the right number 1 windows.  A 
windshield that uses pin and socket electrical connections is installed.  The bulb seal is cut to give 
clearance for terminals that are on the new windshield.  When a windshield that uses the pin and 
socket electrical connections is installed, the related wire bundle is also changed.
Revision 1 - No more work is necessary on airplanes changed as shown in the original issue of this 
service bulletin.
Revision 2 - No more work is necessary on airplanes changed as shown in Revision 1 of this service 
bulletin.

### Page 18

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 47
 
 
E. Compliance
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity.  This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
Compliance Sequence
Condition Action Compliance Time Repeat Interval 
Number 1 windows that 
use screws and lugs for 
the electrical connections
Do the Inspections given in 
Work Packages 1 and 2.
Within 500 flight 
hours after the date 
of revision 1 to this 
service bulletin.
Every 6000 flight 
hours until Work 
Packages 3 and 4 
are done.
Number 1 window 
replaced with the same 
screw and lug type 
window
Do the Inspections given in 
Work Packages 1 and 2.
Within 500 flight 
hours of the number 
1 window 
replacement.
Every 6000 flight 
hours until Work 
Packages 3 and 4 
are done.
Number 1 window that 
uses screws and lugs for 
the electrical connections
Replace with a window that 
uses pins and sockets for 
the electrical connections 
as given in Work Packages 
3 and 4.
No time limit. Terminating action 
for this bulletin

### Page 19

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 47
 
 
G. Manpower
The tables below shows an estimate of the task-hours necessary to do this change for each airplane.  
This estimate is for direct labor only, done by an experienced crew.  Adjust the estimate with operator 
task-hour data if necessary.  The estimate does not include lost time.  These are some examples of 
lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Work Package  1 - Inspection of the Left Number 1 Window
Task
Number of 
Persons Task-Hours Elapsed Hours
Figure 5 1 0.25 0.25
Total per Window 0.25 0.25
Work Package  2 - Inspection of the Right Number 1 Window
Task
Number of 
Persons Task-Hours Elapsed Hours
Figure 6 1 0.25 0.25
Total per Window 0.25 0.25
Work Package  3 - Replacement of the Left Number 1 Window and Changes to the Related
Wiring
Task
Number of 
Persons Task-Hours Elapsed Hours
Open Access 2 1.0 0.50
Remove the Left 
Number 1 Window
2 2.5 1.25
Figure 1 - Cut the 
Bulb Seal
1 0.25 0.25
Figure 2 - Change 
the Wiring
10 . 5 0 . 5
Install the Left 
Number 1 Window
23 . 0 1 . 5
Test 1 0.25 0.25
Close Access 2 1.0 0.50
Total per Window 8.5 4.75

### Page 20

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 47
 
 
H. Weight and Balance Changes
None
I. Electrical Load Data
Not changed
J. References
1. Existing Data:
a. Engineering Change Memo PRR 62777-28S
b. Service Related Problem (SRP) 777-SRP-56-0015
c. 777 Aircraft Maintenance Manual (AMM)  30-41-00, 56-11-01
d. 777 Wiring Diagram  30-41-11, 30-41-12
e. Standard Wiring Practices Manual (SWPM)  20-10-11, 20-10-12, 20-10-13, 20-10-19, 
20-30-12, 20-63-19
f. Standard Overhaul Practices Manual (SOPM)  20-41-02, 20-43-02, 20-43-03, 20-50-10
g. Boeing Service Bulletin  777-56-0002
2. Data supplied with this Service Bulletin:
None
Work Package  4 - Replacement of the Right Number 1 Window and Changes to the Related
Wiring
Task
Number of 
Persons Task-Hours Elapsed Hours
Open Access 2 1.0 0.50
Remove the Right 
Number 1 Window
2 2.5 1.25
Figure 3 - Cut the 
Bulb Seal
1 0.25 0.25
Figure 4 - Change 
the Wiring
10 . 5 0 . 5
Install the Right 
Number 1 Window
23 . 0 1 . 5
Test 1 0.25 0.25
Close Access 2 1.0 0.50
Total per Window 8.5 4.75

### Page 21

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
3. Installation Drawings Used in the Preparation of this Service Bulletin:
These drawings were used to prepare this service bulletin.  These drawings are not necessary 
to make the specified changes, and are not supplied with this service bulletin.  These drawings 
may not be applicable to all airplane configurations or operators.
K. Publications Affected
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability 
information.
Drawing Number Title
288W4100 Wire Bundle Instl - R.S. Cab (STA. 126.5 - 246.0)
288W4101 Wire Bundle Instl - L.S. Cab (STA. 126.5 - 246.0)
Publication Chapter-Section
777 Maintenance Manual 56-11
777 Wiring Diagram Manual 30-41
777 Illustrated Parts Catalog 56-11

### Page 22

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
BLANK PAGE

### Page 23

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary For Each Airplane as shown 
below.  Kit availability is shown in the Reorder Lead Time (ROLT).  ROLT is calculated from the date 
Boeing gets the purchase order.
The kits/parts are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgment.  After the Unit Price date, new price and ROLT data is applicable.  Prices are in 
United States dollars.  Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:  
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington   98124-2207  USA
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
Kit Number Name
ROLT 
(Weeks)
Unit Price thru   
Dec 31/2007
005W3254-1 Top Kit, Flight Deck Window Heat 
Terminal Replacement
     13      $728.00
005W3254-4 Top Kit - Left Number 1 Window 
with New Window Heat Terminal 
Connections 
     16    $16,600.00
005W3254-5 Top Kit - Right Number 1 Window 
with New Window Heat Terminal 
Connections
     18    $16,600.00

### Page 24

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE:
1. One left top kit and one right top kit and the items shown in Paragraph 2.C.2., Parts 
and Materials Supplied by the Operator, are necessary for each airplane
2. Top Kit 005W3254-1 includes the subkits to do the wiring changes for both the left 
and the right side of an airplane but it includes no windows.  A subkit 005W3254-2 
and a Window 141W7400-44 are equivalent to a top kit 005W3254-5.  A  subkit 
005W3254-3 and a Window 141W7400-43 are equivalent to a top kit 005W3254-4.
Kit 005W3254                        
New Part 
Number
QTY
Name Notes-5 -4 -3 -2 -1
005W3254-1 . . . . - Top Kit - Flight Deck Window 
Heat Terminal Replacement
(a)
005W3254-2 1 . . - 1 Sub Kit - Flight Deck Window 
Heat Terminal Right Side
(b)
005W3254-3 . 1 - . 1 Sub Kit - Flight Deck Window 
Heat Terminal Left Side
(c)
005W3254-4 . - . . . Top Kit - Left Number 1 
Window with New Window 
Heat Terminal Connections
005W3254-5 - . . . . Top Kit - Right Number 1 
Window with New Window 
Heat Terminal Connections
005W3254-101 . . 1 . . Wire Identified 
W4123-0111-20
(d)
005W3254-102 . . 1 . . Wire Identified 
W4123-0112-20
(d)
005W3254-103 . . 1 . . Wire Identified W4123-0113-12 (e)
005W3254-104 . . 1 . . Wire Identified W4123-0114-12 (e)
005W3254-106 . . . 1 . Wire Identified W4269-0111-20 (d)
005W3254-107 . . . 1 . Wire Identified W4269-012-20 (d)
005W3254-108 . . . 1 . Wire Identified W4269-0113-12 (e)
005W3254-109 . . . 1 . Wire Identified W4269-0114-12 (e)
141W7400-43 . 1 . . . Left No.1 Window Assembly (f)(g) 
(h)(i)(k)(m)
141W7400-44 1 . . . . Right No.1 Window Assembly (f)(g) 
(h)(j)(l)(m)
D-436-37 . . 2 2 . Splice

### Page 25

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
D-436-38 . . 2 2 . Splice
M39029/57-358 . . 2 2 . Socket Contact
M39029/57-359 . . 2 2 . Socket Contact
(a) Top Kit 005W3254-1 includes the subkits to do the wiring changes for both the left 
and the right side of an airplane but it includes no windows.
(b) A subkit 005W3254-2 and a Window 141W7400-44 are equivalent to a top kit 
005W3254-5.
(c) A subkit 005W3254-3 and a Window 141W7400-43 are equivalent to a top kit 
005W3254-4.
(d) Wire, BMS 13-48, Type 10, Class 1, AWG 20
(e) Wire, BMS 13-48, Type 8, Class 1, AWG 12
(f) Discard the existing part.
(g) This part is used in production.
(h) You cannot use the existing part to replace the new or changed part.
(i) As an option operators can install Left Windshield part number 141W7400-31 or 
141W7400-33 with serial numbers 04xxxH or 05xxxH.
(j) As an option operators can install Right Windshield part number 141W7400-32 or 
141W7400-34 with serial numbers 04xxxH or 05xxxH.
(k) As an option operators can install Left Windshield part number 141W7400-35 or 
141W7400-41.  Windshield  part numbers 141W7400-35 and 141W7400-41 can be 
made from Windshield part numbers 141W7400-31 and 141W7400-33 with serial 
numbers 06339H or higher by the incorporation of Boeing Service Bulletin 777-56-0002.
(l) As an option operators can install Right Windshield part number 141W7400-36 or 
141W7400-42.  Windshield  part numbers 141W7400-36 and 141W7400-42 can be 
made from Windshield part numbers 141W7400-32 and 141W7400-34 with serial 
numbers 06339H or higher by the incorporation of Boeing Service Bulletin 777-56-0002.
(m) PPG Aerospace - Transparencies Div Glass  (V53117)
      P.O. Box 2200
      1719 U.S. Highway 72 East    
      Huntsville, AL 35811-9660
Kit 005W3254                        
New Part 
Number
QTY
Name Notes-5 -4 -3 -2 -1

### Page 26

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
2. Parts and Materials Supplied by the Operator:
3. Parts Modified and Reidentified:
The parts shown below are changed as shown in this service bulletin.  The quantity (QTY) is the 
number of parts changed on each airplane.
4. Parts Removed and Not Replaced:
None
D. Parts Necessary to Change Spares
None
Part Number / 
Specification QTY Name Notes
BMS 13-54 10 feet Lacing Tape, Red (a) (b) (c) 
BMS 13-54 10 feet Lacing Tape, Green (a) (b) (d)
(a)  Type 3, Class 1
(b)  Gudebrod Incorporated (V82110)
       Griffith Towers 
       PO Box 357
       Pottstown, PA 19464
(c)  BACS38K5C, red Tie Strap is optional.  See the Qualified Products List at 
the end of the Boeing Material Specification (BMS) for the supplier data.
(d)  BACS38K5F, green Tie Strap is optional.  See the Qualified Products List 
at the end of the Boeing Material Specification (BMS) for the supplier data.
Existing Part 
Number QTY Name New Part Number Notes
233W8300-7A 1 Glareshield 233W8300-21A (a)(b)(c)
233W8300-20A 1 Glareshield 233W8300-22A (a)(b)(c)
(a)  Make the change given in this service bulletin.
(b) This is the part number after the change given in this service bulletin.
(c) This part is used in production.

### Page 27

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
E. Special Tooling - Price and Availability
Boeing can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this Service 
Bulletin.  Send a Purchase Order to the Director of Spares.  Give this service bulletin number and the 
date the tools will be used.
The kits are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgement.  After the Price date, new price data is applicable.  Prices are in United States 
dollars.  Terms:  Net 30 days.
Reference this service bulletin number and submit purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Transmit a Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207  USA
(Service Bulletin 777-30-0012 R1)
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.  
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be 
necessary.  Examine operator tool supply to make sure all necessary tools are available.
.
Purchase Data:
Tool Kit Number Name
Unit Price
  thru                
Dec 31/2007   
A56001-2 (part of Sling 
Set A56001-15)
Windshield Handling Sling $625.00
Tool Kit Number Name
A56001-2 (part of 
Sling Set A56001-15)
Windshield Handling Sling

### Page 28

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
BLANK PAGE

### Page 29

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS.  UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES.  DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. Manual titles are referred to by acronyms.  Refer to Paragraph 1.J., References, for 
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages.  Task-Hours and Elapsed-Hours 
for each package are given in Paragraph 1.G., Manpower.  You can do each work 
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Torque limits to tighten nuts and bolts are given in 757 Structural Repair Manual, 
Chapter 51.
5. Refer to the Standard Wiring Practices Manual SWPM 20-10-11 and SWPM 20-10-12 
for the wire installation procedures.
6. A Detailed Inspection is defined as:  An intensive examination of a specific item, 
installation, or assembly to detect damage, failure, or irregularity.  Available lighting is 
normally supplemented with a direct source of good lighting at an intensity deemed 
appropriate.  Inspection aids such as mirrors magnifying lenses, etc. may be necessary.  
Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included on other Boeing documents.  
When the words "refer to" are used and the operator has an accepted alternative 
procedure, the accepted alternative procedure can be used.  When the words "as given 
in" are included in the instruction, the procedure in the Boeing document must be used.

### Page 30

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
B. WORK INSTRUCTIONS
WORK PACKAGE 1 - INSPECTION OF THE LEFT NUMBER 1 WINDOW 
WARNING: BEFORE YOU DO MAINTENANCE ON THE WINDOW HEAT SYSTEM, OPEN THE
WINDOW HEAT CIRCUIT BREAKERS.  IF THESE CIRCUIT BREAKERS ARE NOT
OPEN, YOU CAN GET AN ELECTRICAL SHOCK WHEN YOU TOUCH THE
TERMINAL.
1. Open the circuit breakers shown below and attach DO-NOT-CLOSE tags to them:
2. Do an inspection of the left number 1 window as given in Figure 5.   
3. If the left number 1 window is not in a serviceable condition, replace it before the subsequent 
revenue flight.  Refer to 777 AMM 56-11-01 as an accepted procedure.  If the existing window is 
replaced with one of the same type, it will be necessary to do this inspection within 500 flight 
hours.  Windshields in serviceable condition can continue to be used with inspections every 6000 
flight hours, or until the work given in Work Package 3 is done.
4. Remove the DO-NOT-CLOSE tags and close the circuit breakers shown below:
Panel Position Name Circuit Breaker
P110 M26 WHCU BITE 1L C30613
P100 E01 or E02 WDO HTR 1L C30301
P110 F03 WDO HT BACKUP 1L C30415
Panel Position Name Circuit Breaker
P110 M26 WHCU BITE 1L C30613
P100 E01 or E02 WDO HTR 1L C30301
P110 F03 WDO HT BACKUP 1L C30415

### Page 31

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
WORK PACKAGE 2 - INSPECTION OF THE RIGHT NUMBER 1 WINDOW 
WARNING: BEFORE YOU DO MAINTENANCE ON THE WINDOW HEAT SYSTEM, OPEN THE
WINDOW HEAT CIRCUIT BREAKERS.  IF THESE CIRCUIT BREAKERS ARE NOT
OPEN, YOU CAN GET AN ELECTRICAL SHOCK WHEN YOU TOUCH THE
TERMINAL.
1. Open the circuit breakers shown below and attach DO-NOT-CLOSE tags to them:
2. Do an inspection of the right number 1 window as given in Figure 6.   
3. If the right number 1 window is not in a serviceable condition, replace it before the subsequent 
revenue flight.  Refer to 777 AMM 56-11-01 as an accepted procedure.  If the existing within 500 
flight hours.  Windshields in serviceable condition can continue to be used with inspections every 
6000 flight hours, or until the work given in Work Package 4 is done.
4. Remove the DO-NOT-CLOSE tags and close the circuit breakers shown below:
Panel Position Name Circuit Breaker
P210 L08 WHCU BITE 1R C30616
P200 B04 or D11 WDO HTR 1R C30300
P210 C12 WDO HT BACKUP 1R C30414
Panel Position Name Circuit Breaker
P210 L08 WHCU BITE 1R C30616
P200 B04 or D11 WDO HTR 1R C30300
P210 C12 WDO HT BACKUP 1R C30414

### Page 32

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
WORK PACKAGE 3 - REPLACEMENT OF THE LEFT NUMBER 1 WINDOW AND CHANGES TO 
THE RELATED WIRE BUNDLE
WARNING: REMOVE ELECTRICAL POWER FROM THE WINDOW HEAT SYSTEM BEFORE
YOU REMOVE THE WINDOWS.  IF POWER TO THE WINDOW HEAT SYSTEM IS ON,
YOU CAN GET AN ELECTRICAL SHOCK IF YOU TOUCH ELECTRICAL CONTACTS
ATTACHED TO THE WINDOW.  AN ELECTRICAL SHOCK CAN CAUSE INJURY TO
PERSONS.
1. Remove electrical power from the flight compartment window heat systems.  Refer to 777 AMM 
56-11-01 as an accepted procedure.
2. Remove the left number 1 window.  Use the windshield handling sling, A56001-2.  Refer to 777 
AMM 56-11-01 as an accepted procedure. 
3. Cut the bulb seal for the left number 1 window as given in Figure 1.
4. Change the window heat wiring for the left number 1 window as given in Figure 2.  
5. Install the left number 1 window 141W7400-43.  Use the windshield handling sling, A56001-2.  
Refer to 777 AMM 56-11-01 as an accepted procedure.
6. Restore electrical power to the flight compartment window heat systems.  Refer to 777 AMM 
56-11-01 as an accepted procedure.
7. Do the Window Heat Control System - Operational Test as given in 777 AMM 30-41-00.
8. Put the airplane in a serviceable condition.

### Page 33

April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
WORK PACKAGE 4 - REPLACEMENT OF THE RIGHT NUMBER 1 WINDOW AND CHANGES TO 
THE RELATED WIRE BUNDLE
WARNING: REMOVE ELECTRICAL POWER FROM THE WINDOW HEAT SYSTEM BEFORE
YOU REMOVE THE WINDOWS.  IF POWER TO THE WINDOW HEAT SYSTEM IS ON,
YOU CAN GET AN ELECTRICAL SHOCK IF YOU TOUCH ELECTRICAL CONTACTS
ATTACHED TO THE WINDOW.  AN ELECTRICAL SHOCK CAN CAUSE INJURY TO
PERSONS.
1. Remove electrical power from the flight compartment window heat systems.  Refer to 777 AMM 
56-11-01 as an accepted procedure.
2. Remove the right number 1 window.  Use the windshield handling sling, A56001-2.   Refer to 777 
AMM 56-11-01 as an accepted procedure. 
3. Cut the bulb seal for the right number 1 window as given in Figure 3.
4. Change the window heat wiring for the right number 1 window as given in Figure 4.
5. Install the right number 1 window 141W7400-44.  Use the windshield handling sling, A56001-2.  
Refer to 777 AMM 56-11-01 as an accepted procedure.
6. Restore electrical power to the window heat systems for the flight compartment.  Refer to 777 
AMM 56-11-01 as an accepted procedure.
7. Do the Window Heat Control System - Operational Test as given in  777 AMM 30-41-00.
8. Put the airplane in a serviceable condition.

### Page 34

FIGURE 1: CUT THE BULB SEAL FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
FIGURE  1: CUT THE BULB SEAL FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
FWD
GLARESHIELD
ASEE
2
365443
(SHEET 1 OF 2)

### Page 35

FIGURE 1: CUT THE BULB SEAL FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 35 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.  The QTY 
numbers shown below are the number of parts necessary for this figure.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
CAUTION: DO NOT CUT THE STRUCTURE BELOW THE BULB SEAL.  THE WINDOW
SILL IS A HIGH MOISTURE AREA AND MOISTURE CAN CAUSE CORROSION
IF THE FINISH IS DAMAGED.  DAMAGE TO THE FINISH MUST BE REPARED.
1
Cut Bulb Seal 233W8300-11 - to clear the new 
terminal.
NOTE: If the finish below the bulb seal is damaged, it must be sealed with chemical
treatment and primer.  Refer to Standard Overhaul Practices Manual SOPM
20-41-02 and SOPM 20-43-02 as accepted procedures.
2 Identify Glareshield 233W8300-21A - (a)
(a) Part mark with new part number. Rubber-Stamp or Hand Write. 12 characters per inch. Use 
abrasive resistance ink. Refer to SOPM 20-50-10 as an accepted procedure.
BULB SEAL
A
1
1.20
1.40
FWD
384851
(SHEET 2 OF 2)

### Page 36

FIGURE 2: WIRING CHANGE FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 36 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
FIGURE  2: WIRING CHANGE FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
FLIGHT COMPARTMENT
FWD
INBDJ13
J5
J1
J15W4123
AREA
SPLICE
359711
(SHEET 1 OF 3)

### Page 37

FIGURE 2: WIRING CHANGE FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 37 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
2005B-12
2005R-12
0002-20
1001-20
SM9
SM4
SM3
SM10
0111-20
0112-20
0113-12
0114-12
J15
J13
J5
J1
STA 160, WL 250, LBL 15
B30101 WINDOW 1-LEFT
STA 160, WL 250, LBL 15
B30101 WINDOW 1-LEFT
D30108
B-A
B-B
D30106
J15
J13
=1
=1
D30105
D30104
D30101
E-A
=1
=1
=1
E-B
E-C
J5
J4
J1
1
1
2
2
W4123
3
4
5
6
8
8
7
7
DELETED WIRE OR FORMER ROUTING
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
REFERENCE: WIRING DIAGRAM 30-41-11
W88286
(SHEET 2 OF 3)

### Page 38

FIGURE 2: WIRING CHANGE FOR THE LEFT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
NOTE:Use the parts supplied in kit 005W3254-3 or equivalent.
FLAG 
NOTE NAME IDENTIFICATION QTY MORE DATA
1 Splice D-436-37 2 Refer to Standard Wiring Practices 
Manual SWPM 20-30-12 as an accepted 
procedure.
2 Splice D-436-38 2 Refer to SWPM 20-30-12 as an 
accepted procedure.
3W i r e  
Lacing Tape
005W3254-101
BMS 13-54, Type 3, 
Class 1, Red
1( a )
or optional BACS38K5C Tie Strap (c)
4W i r e  
Lacing Tape
005W3254-102
BMS 13-54, Type 3, 
Class 1, Red
1( a )
or optional BACS38K5C Tie Strap (c)
5W i r e  
Lacing Tape
005W3254-103
BMS 13-54, Type 3, 
Class 1, Red
1( b )
or optional BACS38K5C Tie Strap (c)
6W i r e  
Lacing Tape
005W3254-104 
BMS 13-54, Type 3, 
Class 1, Red
1( b )
or optional BACS38K5C Tie Strap (c)
7 Socket Contact M39029/57-358 2 Refer to SWPM 20-63-19 as an 
accepted procedure.
NOTE: Isopropyl alcohol is applied to the installation tool and on the contact before
installation of the contact. Isopropyl alcohol is a lubricant that helps with
installation of the contact in the connector.
8 Socket Contact M39029/57-359 2 Refer to SWPM 20-63-19 as an 
accepted procedure.
NOTE: Isopropyl alcohol is applied to the installation tool and on the contact before
installation of the contact. Isopropyl alcohol is a lubricant that helps with
installation of the contact in the connector.
(a) BMS 13-48, Type 10, Class 1, AWG 20
(b) BMS 13-48, Type 8, Class 1, AWG 12
(c) Red is for left channel separation. Refer to SWPM 20-10-19 as an accepted procedure.
(SHEET 3 OF 3)

### Page 39

FIGURE 3: CUT THE BULB SEAL FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 39 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
FIGURE  3: CUT THE BULB SEAL FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
FWD
GLARESHIELD
ASEE
2
365437
(SHEET 1 OF 2)

### Page 40

FIGURE 3: CUT THE BULB SEAL FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 40 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.  The QTY 
numbers shown below are the number of parts necessary for this figure.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
CAUTION: DO NOT CUT THE STRUCTURE BELOW THE BULB SEAL.  THE WINDOW
SILL IS A HIGH MOISTURE AREA AND MOISTURE CAN CAUSE CORROSION
IF THE FINISH IS DAMAGED.  DAMAGE TO THE FINISH MUST BE REPARED.
1
Cut Bulb Seal 233W8300-12 - to clear the new 
terminal.
NOTE: If the finish below the bulb seal is damaged, it must be sealed with chemical
treatment and primer.  Refer to Standard Overhaul Practices Manual SOPM
20-41-02 and SOPM 20-43-03 as accepted procedures.
2 Identify Glareshield 233W8300-22A - (a)
(a) Part mark with new part number. Rubber-Stamp or Hand Write. 12 characters per inch. Use 
abrasive resistance ink. Refer to SOPM 20-50-10 as an accepted procedure.
A
1 BULB SEAL
1.20
1.40 FWD
384883
(SHEET 2 OF 2)

### Page 41

FIGURE 4: WIRING CHANGE FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 41 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
FIGURE  4: WIRING CHANGE FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
FLIGHT COMPARTMENT
INBD
FWD
J13
SPLICE
AREA
W4269
J1
J15
J5
W86527
(SHEET 1 OF 3)

### Page 42

FIGURE 4: WIRING CHANGE FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 42 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
D30206
D30208
D30205
D30204
D30201
STA 160, WL 250, RBL 15
B30201 WINDOW 1-RIGHT
STA 160, WL 250, RBL 15
B30201 WINDOW 1-RIGHT
J1
J4
J5
E-C
E-B
=1
=1
=1
E-A
=1
=1
J13
J15
B-B
B-A
J1
J5
J13
J15
0114-12
0113-12
0112-20
0111-20
SM10
SM3
SM4
SM9
1001-20
0002-20
2005R-12
2005B-12
W4269
7
7
8
8
6
5
4
3
2
2
1
1
REFERENCE: WIRING DIAGRAM 30-41-12
DELETED WIRE OR FORMER ROUTING
ADDED WIRE OR NEW ROUTING
EXISTING WIRE
W86528
(SHEET 2 OF 3)

### Page 43

FIGURE 4: WIRING CHANGE FOR THE RIGHT NUMBER 1 FLIGHT COMPARTMENT WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 43 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
NOTE: Use the parts supplied in kit 005W3254-2 or equivalent.
FLAG 
NOTE NAME IDENTIFICATION QTY MORE DATA
1 Splice D-436-37 2 Refer to Standard Wiring Practices 
Manual SWPM 20-30-12 as an accepted 
procedure.
2 Splice D-436-38 2 Refer to SWPM 20-30-12 as an accepted 
procedure.
3W i r e  
Lacing Tape
005W3254-106   
BMS 13-54, Type 3, 
Class 1, Green
1 (a) or optional BACS38K5F Tie Strap (c)
4W i r e  
Lacing Tape
005W3254-107   
BMS 13-54, Type 3, 
Class 1, Green
1 (a) or optional BACS38K5F Tie Strap (c)
5W i r e  
Lacing Tape
005W3254-108  
BMS 13-54, Type 3, 
Class 1, Green
1 (b) or optional BACS38K5F Tie Strap (c)
6W i r e  
Lacing Tape
005W3254-109
BMS 13-54, Type 3, 
Class 1, Green
1 (b) or optional BACS38K5F Tie Strap (c)
7 Socket Contact M39029/57-358 2 Refer to SWPM 20-63-19 as an accepted 
procedure.
NOTE: Isopropyl alcohol is applied to the installation tool and on the contact before
installation of the contact. Isopropyl alcohol is a lubricant that helps with
installation of the contact in the connector.
8 Socket Contact M39029/57-359 2 Refer to SWPM 20-63-19 as an accepted 
procedure.
NOTE: Isopropyl alcohol is applied to the installation tool and on the contact before
installation of the contact. Isopropyl alcohol is a lubricant that helps with
installation of the contact in the connector.
(a) BMS 13-48, Type 10, Class 1, AWG 20
(b) BMS 13-48, Type 8, Class 1, AWG 12
(c) Green is for right channel separation.  Refer to SWPM 20-10-19 as an accepted 
procedure.
(SHEET 3 OF 3)

### Page 44

FIGURE 5: INSPECTION OF AN ELECTRICAL CONNECTION ON THE LEFT NUMBER 1 WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 44 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
FIGURE  5: INSPECTION OF AN ELECTRICAL CONNECTION ON THE LEFT NUMBER 1 WINDOW
FLIGHT COMPARTMENT
INBD
FWD
3
1
2 3
SCREW
J13
J5
CONNECTOR
BLOCK,
TERMINAL
LUG
J4J15
J1W4123
498760
(SHEET 1 OF 2)

### Page 45

FIGURE 5: INSPECTION OF AN ELECTRICAL CONNECTION ON THE LEFT NUMBER 1 WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 45 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1
Inspect Terminal Block - 1 at the J5 connection
Connector - 1
Wiring Wire bundle W4123 1
NOTE: If there is a melted terminal, black marks, or discoloration, the window must be
replaced.
NOTE: If there is damage to the wiring it must be repaired.  Refer to Standard Wiring
Practices Manual SWPM 20-10-13 as an accepted procedure.
2
Inspect Lug - 1 to make sure it is a 
tight connection.
NOTE: If the lug at the terminal moves with light manual pressure, then the screw that
attaches it must be tightened.  There are three causes for a loose terminal.
1-The screw is not tightened to the correct torque
2-The terminal is damaged
3-The incorrect screw is installed. The part number of the correct screw is
NAS1802-3-11.
CAUTION: DO NOT OVER TIGHTEN.  THE TERMINAL CAN BE DAMAGED BY TOO MUCH
FORCE.  A DAMAGED TERMINAL WILL REQUIRE THE REPLACEMENT OF THE
WINDOW.
3
Turn Screw - 1 to 25 to 30 inch pounds of torque.  
Refer to Standard Overhaul 
Practices Manual SOPM 20-43-03 
as an accepted procedure. 
Inspect Lug 1 to make sure the connection is 
tight. 
NOTE: The screw is only tightened if the lug is loose.  If it is the correct screw and it cannot
be tightened to 25 to 30 inch pounds, the window must be replaced.
(SHEET 2 OF 2)

### Page 46

FIGURE 6: INSPECTION OF AN ELECTRICAL CONNECTION ON THE RIGHT NUMBER 1 WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
FIGURE  6: INSPECTION OF AN ELECTRICAL CONNECTION ON THE RIGHT NUMBER 1 WINDOW
FLIGHT COMPARTMENT
1
FWD
INBD
3
32
W4269
TERMINAL
CONNECTOR
BLOCK,
J1
SCREW
LUG
J5
J13
J15J4
499019
(SHEET 1 OF 2)

### Page 47

FIGURE 6: INSPECTION OF AN ELECTRICAL CONNECTION ON THE RIGHT NUMBER 1 WINDOW
April 07, 2004
Revision 2:  December 19, 2007 777-30-0012
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 47
BOEING SERVICE BULLETIN 777-30-0012
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. 
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1
Inspect Terminal Block - 1 at the J5 connection
Connector - 1
Wiring Wire bundle W4269 1
NOTE: If there is a melted terminal, black marks, or discoloration, the window must be
replaced.
NOTE: If there is damage to the wiring it must be repaired. Refer to Standard Wiring
Practices Manual SWPM 20-10-13 as an accepted procedure.
2
Inspect Lug - 1 to make sure it is a 
tight connection.
NOTE: If the lug at the terminal moves with light manual pressure, then the screw that
attaches it must be tightened.  There are three causes for a loose terminal.
1-The screw is not tightened to the correct torque
2-The terminal is damaged
3-The incorrect screw is installed. The part number of the correct screw is
NAS1802-3-11.
CAUTION: DO NOT OVER TIGHTEN.  THE TERMINAL CAN BE DAMAGED BY TOO MUCH
FORCE.  A DAMAGED TERMINAL WILL REQUIRE THE REPLACEMENT OF THE
WINDOW.
3
Turn Screw - 1 to 25 to 30 inch pounds of torque. 
Refer to Standard Overhaul 
Practices Manual SOPM 20-43-03 
as an accepted procedure. 
Inspect Lug 1 to make sure the connection is 
tight. 
NOTE: The screw is only tightened if the lug is loose.  If it is the correct screw and it cannot
be tightened to 25 to 30 inch pounds, the window must be replaced.
(SHEET 2 OF 2)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
