# Boeing Service Bulletin 777-32-0085: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0424; AD 2012-19-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 777-32-0085](https://openairdocs.org/service-documents/boeing/sb-777-32-0085.md)
- Title as filed: U.S. DOT/FAA - SB-777-32-0085-00
- Pages: 38
- PDF: https://openairdocs.org/files/sha256/38/ec/38ec37697b0f8982f101ce1774f8c032602540a0a1196837ba4f270e170bbd32
- Page: https://openairdocs.org/service-documents/boeing/sb-777-32-0085/file/38ec37697b0f

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
Number: 777-32-0085
Original Issue: April 14, 2011
ATA System: 3200
SUBJECT: LANDING GEAR - Main Landing Gear - Center Axle and Pivot Joint Configuration
Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
1 of 38
4.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
2 of 38
BOEING SERVICE BULLETIN 777-32-0085
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 3
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 3
D. Description .............................................. 1 4
E. Compliance .............................................. 1 5
F. Approval ............................................... 1 5
G. Manpower .............................................. 1 5
H. Weight and Balance Changes .................................... 1 6
I. Electrical Load Data ......................................... 1 6
J. References .............................................. 1 6
1. Existing Data .......................................... 1 6
2. Data supplied with this Service Bulletin ............................ 1 6
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 6
K. Publications Affected ........................................ 1 7
L. Interchangeability and Intermixability of Parts ........................... 1 7
2. MATERIAL INFORMATION ........................................ 1 9
A. Material - Price and Availability ................................... 1 9
B. Industry Support Information .................................... 2 0
C. Parts Necessary For Each Airplane ................................. 2 0
1. Kits/Parts ............................................ 2 0
2. Parts and Materials Supplied by the Operator ........................ 2 0
3. Parts Modified and Reidentified ................................ 2 1
4. Parts Removed and Not Replaced .............................. 2 1
D. Parts Necessary to Change Spares ................................. 2 1
E. Special Tooling - Price and Availability ............................... 2 1
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 2
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 3
A. GENERAL INFORMATION ..................................... 2 3
B. WORK INSTRUCTIONS ....................................... 2 3
FIGURE 1: CENTER AXLE CHANGE ................................... 2 5
FIGURE 2: INNER CYLINDER CHANGE ................................. 2 7
APPENDIX A: PART MARKING REIDENTIFICATION TABLE ........................ 3 0
APPENDIX B: CENTER AXLE ASSEMBLY AND INNER CYLINDER ASSEMBLY INTERCHANGEABILITY
BASED ON AIRPLANE MINOR MODEL ........................... 3 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
3 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
4 of 38
BOEING SERVICE BULLETIN 777-32-0085
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
SummaryNumber: 777-32-0085Original Issue: April 14, 2011
ATA System: 3200
SUBJECT: LANDING GEAR - Main Landing Gear - Center Axle and Pivot Joint Configuration
Change
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
Accomplishment of this service bulletin will change the configuration of the main landing gear (MLG) pivot joint
to reduce the amount of heat generated in the center axle and the shock strut inner cylinder lugs during takeoff
and landing. High levels of heat in the pivot joint can result in damage to the center axle and inner cylinder lugs
which could result in significant manpower and airplane downtime to repair.
During MLG overhaul, 39 center axles have been found with cracks or heat damage at the inner cylinder/truck
beam pivot joint location. There have been no reports of a center axle fracture. There have been no reports of
heat damage in the inner cylinder pivot bores. Heat damage and cracks were found at the pivot joint location
which is caused by the truck pitching motion during normal airplane operations. Cracks were found in areas
common to the inner cylinder pivot bushings where heat damage had occurred.
This service bulletin provides the instructions to change the configuration of the center axle assemblies and
shock strut inner cylinder assemblies of the MLGs to reduce friction in the pivot joint. Reduced friction in the
pivot joint will lead to a lower amount of heat in the pivot joint which will extend the service life of the parts.
Incorporation of the changes in accordance with this service bulletin and a final, one-time inspection of the pivot
joint in accordance with Boeing Service Bulletin (SB) 777-32A0082, Part 2 is terminating action to the repeat
inspections of SB 777-32A0082, Part 2.
Incorporation of the changes in accordance with this service bulletin and incorporation of the lubrication
requirements in accordance with 777 MPD Section 9, 32-CMR-01 is terminating action to the repeat lubrications
of SB 777-32A0082, Part 1.
Boeing Service Related Problem (SRP) 777-SRP-32-0159 is related to this service bulletin.
Boeing Service Letter (SL) 777-SL-32-059 is related to this service bulletin.
ACTION (PRR 62777-70S)
Get access to the left and right MLG wheel wells. Remove the landing gear center axles of both MLGs. Replace
the center axles or change the center axles by polishing to the new configuration. Remove the inner cylinder
bushings and install new inner cylinder bushings. Part mark the MLG components and assemblies. Lubricate
the pivot joint with new grease.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
5 of 38

### Page 6

Update maintenance program in accordance with 777 MPD Section 9, 32-CMR-01 to do periodic lubrications
of the MLG pivot joint.
EFFECTIVITY
777-200, -300, -200LR, -300ER and 777F Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks given in this service bulletin mandatory.
No compliance time is given.
Boeing recommends this service bulletin be done to introduce improvements.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
6 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-32-0085
REMOVE THE CENTER AXLES OF BOTH MLGS. REPLACE
THE CENTER AXLES OR CHANGE THE CENTER AXLES BY
POLISHING TO THE NEW CONFIGURATION. REMOVE THE
INNER CYLINDER BUSHINGS AND INSTALL NEW INNER
CYLINDER BUSHINGS. PART MARK THE MLG COMPONENTS
AND ASSEMBLIES. LUBRICATE THE PIVOT JOINT WITH NEW
GREASE  1999985
Original Issue: April 14, 2011
777-32-0085
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  7 of 38

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
8 of 38
BOEING SERVICE BULLETIN 777-32-0085
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
Number: 777-32-0085
Original Issue: April 14, 2011
ATA System: 3200
SUBJECT: LANDING GEAR - Main Landing Gear - Center Axle and Pivot Joint Configuration
Change
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 62777-70S for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
777-200LR, -300ER and 777F Airplanes with line number 423- 914.-1
777-200 and -300 Airplanes with line number 1- 868.-2
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
2WA001 - WA017
2WA076 - WA080
2WA086 - WA093
2WA101 - WA104
2WA116 - WA119
2WA131 - WA137
2WA171 - WA175
2WA196 - WA198
2WA206 - WA212
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
9 of 38

### Page 10

GroupVariable Number
2WA221 - WA223
2WA231 - WA232
2WA241 - WA250
2WA261 - WA266
2WA281 - WA283
2WA301 - WA304
2WB001 - WB021
2WB031 - WB046
2WB051 - WB088
2WB101 - WB106
2WB121 - WB125
2WB131 - WB148
2WB151 - WB155
2WB161 - WB177
2WB181 - WB194
2WB201 - WB215
2WB231 - WB247
2WB271 - WB273
2WB276 - WB286
2WB291 - WB302
2WB306 - WB307
2WB311 - WB337
2WB341 - WB342
2WB366 - WB368
2WB371 - WB388
2WB406
2WB411 - WB413
2WB416 - WB439
2WB446 - WB453
2WB476
2WB481 - WB484
2WB501 - WB512
2WB531 - WB537
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
10 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 11

GroupVariable Number
2WB551 - WB554
2WB591 - WB597
2WB601 - WB606
2WB611 - WB622
2WB631 - WB638
2WB646 - WB649
2WC051 - WC073
2WC101 - WC104
2WC111 - WC120
2WC221 - WC224
2WC241 - WC243
2WC281 - WC290
2WC301 - WC308
2WC361 - WC364
2WC371 - WC374
2WC381 - WC395
2WC441
2WC446 - WC449
2WC456 - WC459
2WC486 - WC493
2WC506 - WC508
2WC521 - WC522
2WC531 - WC536
2WC546 - WC548
2WC556
2WC566 - WC567
2WC571 - WC574
2WC581
1WD001 - WD002
1WD011 - WD018
1WD031 - WD036
1WD046 - WD055
1WD066 - WD075
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
11 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 12

GroupVariable Number
1WD081 - WD088
1WD091
1WD096
1WD101 - WD103
1WD501 - WD513
1WD521 - WD541
1WD546 - WD554
1WD561 - WD573
1WD581 - WD599
1WD606 - WD609
1WD621 - WD632
1WD651 - WD665
1WD671 - WD676
1WD691 - WD709
1WD741 - WD752
1WD761 - WD771
1WD786 - WD788
1WD796 - WD813
1WD826 - WD837
1WD846 - WD861
1WD871 - WD883
1WD911 - WD914
1WD921 - WD922
1WD936 - WD939
1WD946 - WD951
1WD966 - WD970
1WD981 - WD982
1WD986 - WD987
1WD996
1WE001 - WE004
1WE011 - WE012
1WE021 - WE024
1WE031
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
12 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 13

GroupVariable Number
1WE051 - WE052
1WE071
1WE081 - WE082
1WE126 - WE131
1WF001 - WF004
1WF016 - WF020
1WF031 - WF032
1WF046 - WF053
1WF076 - WF077
1WF081 - WF088
1WF096 - WF099
1WF106 - WF107
1WF111 - WF112
1WF121
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for
the recommended use.
B. Concurrent Requirements
The service bulletin listed below must be done at the same time as this service bulletin:
DescriptionService BulletinCompany
A final one-time inspection of the pivot joint
in accordance with Part 2 - MLG Pivot Joint
Inspection is required for terminating action
of the repeat inspections.
777-32A0082 Original IssueThe Boeing Company
C. Reason
Accomplishment of this service bulletin will change the configuration of the main landing gear (MLG)
pivot joint to reduce the amount of heat generated in the center axle and the shock strut inner cylinder
lugs during takeoff and landing. High levels of heat in the pivot joint can result in damage to the center
axle and inner cylinder lugs which could result in significant manpower and airplane downtime to repair.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
13 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 14

During MLG overhaul, 39 center axles have been found with cracks or heat damage at the inner
cylinder/truck beam pivot joint location. There have been no reports of a center axle fracture. There
have been no reports of heat damage in the inner cylinder pivot bores. Heat damage and cracks were
found at the pivot joint location which is caused by the truck pitching motion during normal airplane
operations. Cracks were found in areas common to the inner cylinder pivot bushings where heat damage
had occurred.
This service bulletin provides the instructions to change the configuration of the center axle assemblies
and shock strut inner cylinder assemblies of the MLGs to reduce friction in the pivot joint. Reduced
friction in the pivot joint will lead to a lower amount of heat in the pivot joint which will extend the service
life of the parts.
Incorporation of the changes in accordance with this service bulletin and a final, one-time inspection
of the pivot joint in accordance with Boeing Service Bulletin (SB) 777-32A0082, Part 2 is terminating
action to the repeat inspections of SB 777-32A0082, Part 2.
Incorporation of the changes in accordance with this service bulletin and incorporation of the lubrication
requirements in accordance with 777 MPD Section 9, 32-CMR-01 is terminating action to the repeat
lubrications of SB 777-32A0082, Part 1.
Boeing Service Related Problem (SRP) 777-SRP-32-0159 is related to this service bulletin.
Boeing Service Letter (SL) 777-SL-32-059 is related to this service bulletin.
D. Description
Get access to the left and right MLG wheel wells. Remove the landing gear center axles of both MLGs.
Replace the center axles or change the center axles by polishing to the new configuration. Remove
the inner cylinder bushings and install new inner cylinder bushings. Part mark the MLG components
and assemblies. Lubricate the pivot joint with new grease.
Update maintenance program in accordance with 777 MPD Section 9, 32-CMR-01 to do periodic
lubrications of the MLG pivot joint.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
731, 741777-200LR, 777-300ER, 777F
Group 2:
Affected Maintenance Zones
ZoneModel
731, 741777-200, 777-300
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
14 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 15

E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks given in this service
bulletin mandatory.
No compliance time is given.
Boeing recommends this service bulletin be done to introduce improvements.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
2.6013.005Open Access
9.0036.004Part 1: Figure 1 (a)
4.0016.004Part 2: Figure 2
2.6013.005Close Access
18.2078.00TOTAL FOR EACH AIRPLANE
(a) Polish task is variable in nature and is not included in estimate.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
15 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 16

H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 3254.5+ 2.4All Airplanes
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 62777-70S
b. Boeing Service Bulletin 777-32A0082
c. Boeing Service Letter 777-SL-32-001, 777-SL-32-059
d. Boeing Service Related Problem (SRP) 777-SRP-32-0159
e. Component Maintenance Manual (CMM) 32-11-03, 32-11-07, 32-11-64, 32-11-65
f. Standard Overhaul Practices Manual (SOPM) 20-30-03, 20-42-03, 20-42-10, 20-50-10,
20-60-02
g. 777 Aircraft Maintenance Manual (AMM) 12-21-14, 32-00-15, 32-00-30, 32-11-26
h. 777 Maintenance Planning Data (MPD) Section 9, 32-CMR-01
2. Data supplied with this Service Bulletin
a. Drawings:
ADCNDCN/REVSheetTitleDrawing No
-B1Misc Tool Replacement and Honing Kit In-
ner Cyl Ctr Axle
MIT161W1122
--2
--3
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
Installation - Main Landing Gear161W0000
This drawing was used to prepare this service bulletin. This drawing is not necessary to make the
specified changes, and is not supplied with this service bulletin. This drawing may not be applicable
to all airplane configurations or operators.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
16 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 17

K. Publications Affected
1. Publications:
Chapter-SectionPublication
12-21, 32-11777 Aircraft Maintenance Manual
32-11777 Illustrated Parts Catalog
32-11Component Maintenance Manual
Section 9, ATA 32777 Maintenance Planning Data Document
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
17 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 18

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
18 of 38
BOEING SERVICE BULLETIN 777-32-0085
BLANK PAGE

### Page 19

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the parts shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The parts are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
NamePart Number
$5,166.00160Bushing - Inner Cylinder, Main Landing Gear161W1122-4 (a)
$4,685.00160Bushing - Inner Cylinder, Main Landing Gear161W1122-5 (b)
$59,569.00608Axle Assembly - Center, Main Landing Gear161W1163-21
(a) This part can be fabricated. Refer to CMM 32-11-65 as an accepted procedure.
(b) This is an oversized part.
Group 2:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
NamePart Number
$5,166.00160Bushing - Inner Cylinder, Main Landing Gear161W1122-4 (a)
$4,685.00160Bushing - Inner Cylinder, Main Landing Gear161W1122-5 (b)
$56,569.00608Axle Assembly - Center, Main Landing Gear161W1163-19
(a) This part can be fabricated. Refer to CMM 32-11-03 as an accepted procedure.
(b) This is an oversized part.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
19 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 20

B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Group 1:
NotesNameQTYPart Number
(a)Bushing - Inner Cylinder, Main
Landing Gear
4161W1122-4
(b)Bushing - Inner Cylinder, Main
Landing Gear
4161W1122-5
Axle Assembly - Center, Main
Landing Gear
2161W1163-21
(a) This part can be fabricated. Refer to CMM 32-11-65 as an accepted procedure.
(b) This is an oversized part.
Group 2:
NotesNameQTYPart Number
(a)Bushing - Inner Cylinder, Main
Landing Gear
4161W1122-4
(b)Bushing - Inner Cylinder, Main
Landing Gear
4161W1122-5
Axle Assembly - Center, Main
Landing Gear
2161W1163-19
(a) This part can be fabricated. Refer to CMM 32-11-03 as an accepted procedure.
(b) This is an oversized part.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
Grease-MIL-PRF-32014
(a)Sealant-BMS 5-95
(a)Enamel-BMS 10-60, Type
II
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
20 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 21

NotesNameQTYPart Number /
Specification
(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
3. Parts Modified and Reidentified
Refer to APPENDIX A for Part Marking and Reidentification.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
Boeing can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this Service
Bulletin. Send a Purchase Order to the Director of Spares. Give this service bulletin number and the
date the tools will be used.
Purchase Data:
Unit PriceNameTool Kit Number
Contact Boeing
Spares for Current
Pricing Information
Misc Tool - Bushing Replace-
ment and Honing Kit - Inner Cyl
Ctr Axle
MIT161W1122
The kits are subject to the terms and conditions of the Boeing standard purchase order
acknowledgement. After the Price date, new price data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
Reference this service bulletin number and submit purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Mail to:
Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
(Service Bulletin 777-32-0085)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
21 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 22

F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be
necessary. Examine operator tool supply to make sure all necessary tools are available.
NameTool Kit Number
Misc Tool - Bushing Replace-
ment and Honing Kit - Inner Cyl
Ctr Axle
MIT161W1122
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
22 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 23

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions, and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
6. Refer to APPENDIX A for Part Marking Reidentification.
B. WORK INSTRUCTIONS
Airplane Work
1. Install the main landing gear (MLG) and nose landing gear (NLG) downlock pins. Refer to 777
AMM 32-00-30 as an accepted procedure.
2. Install the MLG and NLG door safety pins. Refer to 777 AMM 32-00-15 as an accepted procedure.
3. Remove the left and right MLG center axles. Refer to 777 AMM 32-11-26 as an accepted procedure.
4. Change both the left and right MLG center axles in accordance with Part 1 - Center Axle Change.
5. Change both the left and right MLG inner cylinder assemblies in accordance with Part 2 - Inner
Cylinder Change.
6. Install the left and right MLG changed center axles. Refer to 777 AMM 32-11-26 as an accepted
procedure.
7. Lubricate the MLG pivot joint using MIL-PRF-32014 grease. Refer 777 AMM 12-21-14 as an
accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
23 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 24

8. Apply new part mark to the left and right MLG component and buildup assemblies. Refer to SOPM
20-50-10 as an accepted procedure. Refer to APPENDIX A for new part numbers.
9. Remove the MLG and NLG door safety pins. Refer to 777 AMM 32-00-15 as an accepted procedure.
10. Remove the MLG and NLG downlock pins. Refer to 777 AMM 32-00-30 as an accepted procedure.
11. Put the airplane back into serviceable condition.
12. Update maintenance program in accordance with 777 MPD Section 9, 32-CMR-01 to do periodic
lubrications of the MLG pivot joint. Use MIL-PRF-32014 grease only. Refer to 777 AMM 12-21-14
as an accepted procedure.
PART 1 - CENTER AXLE CHANGE
1. Option 1: Replace existing center axle assembly with new, overhauled or serviceable center axle
assembly, as applicable. Refer to APPENDIX B for part number applicability.
2. Option 2: Change the existing center axle assembly in accordance with FIGURE 1.
PART 2 - INNER CYLINDER CHANGE
1. Option 1: Replace existing inner cylinder assembly with new, overhauled or serviceable inner
cylinder assembly, as applicable. Refer to APPENDIX B for part number applicability.
2. Option 2: Change existing inner cylinder assembly in accordance with FIGURE 2.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
24 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 25

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Polish, lap or re-
dress the chrome
plate on the center
journal outside diam-
eter to a surface
roughness of 8 Ra
or better. Refer to
SOPM 20-42-03 as
an accepted proce-
dure. Grinding of the
chrome plate is not
allowed. Operations
which produce
sparks are not al-
lowed. (a)
1-Center AxlePolish1
to center axle and
center axle assem-
bly. Refer to CMM
32-11-07, Repair 7-
2 or CMM 32-11-64,
Repair 5-2 as an ac-
cepted procedure,
as applicable. Refer
to APPENDIX A for
new part numbers
and part marking
methods.
--Part MarkApply2
FIGURE 1: CENTER AXLE CHANGE
(SHEET 1 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
25 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 26

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Restore any dam-
aged finishes. Refer
to CMM 32-11-07,
Repair 7-2 or CMM
32-11-64, Repair 5-
2 as an accepted
procedure, as appli-
cable.
--FinishesApply3
(a) If using cooling fluid during polishing, remove wheel sleeves prior to polishing. Reinstall wheel sleeves
after polishing. Refer to CMM 32-11-07, Repair 7-1 or CMM 32-11-64, Repair 5-1 as an accepted procedure,
as applicable.
FIGURE 1: CENTER AXLE CHANGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
26 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 27

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to tool
MIT161W1122 in-
structions.
2161W1122-2
(161W1122-1 or
161W1122-3 optional)
Bushing, Inner CylinderRemove1
Refer to SOPM 20-
30-03 as an accept-
ed procedure.
--Inner Cylinder Bore and
Faces
Clean2
FIGURE 2: INNER CYLINDER CHANGE
(SHEET 1 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
27 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 28

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Restore any cadmi-
um plating and any
primer that is miss-
ing. Refer to CMM
32-11-03, Repair 4-
2 or CMM 32-11-65,
Repair 5-2, as appli-
cable, and SOPM
20-42-10 as accept-
ed procedures.
--FinishesApply3
Refer to CMM 32-
11-03, Repair 4-1 or
CMM 32-11-65, Re-
pair 5-1 as an ac-
cepted procedure,
as applicable. Refer
to tool
MIT161W1122 in-
structions.
2161W1122-4
(161W1122-5 optional)
Bushing, Inner CylinderInstall (New)4
at the lubrication fit-
tings until grease
appears in bushing
inner diameter at all
through-wall hole lo-
cations. Temporary
plugging of individu-
al bushing holes is
allowed to make
sure grease gets to
all through-wall hole
locations. Refer to
CMM 32-11-03, Re-
pair 4-1 or CMM 32-
11-65, Repair 5-1 as
an accepted proce-
dure, as applicable.
-MIL-PRF-32014GreaseApply5
FIGURE 2: INNER CYLINDER CHANGE
(SHEET 2 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
28 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 29

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to SOPM 20-
30-03 as an accept-
ed procedure.
4-Inner Cylinder Lug
Faces
Clean6
Fillet seal bushing
flange and shank
end. Refer to CMM
32-11-03, Repair 4-
1 or CMM 32-11-65,
Repair 5-1 as an ac-
cepted procedure,
as applicable.
-BMS 5-95SealantApply
Refer to SOPM 20-
60-02 as an accept-
ed procedure. Use
color 707 Gray.
-BMS 10-60 TYPE IIEnamelApply
as necessary to
meet the dimension-
al requirements. Re-
fer to CMM 32-11-
03, Repair 4-1 or
CMM 32-11-65, Re-
pair 5-1 as an ac-
cepted procedure,
as applicable. Refer
to tool
MIT161W1122 in-
structions. (a) (b)
2161W1122-4
(161W1122-5 optional)
Bushing, Inner CylinderHone7
to inner cylinder as-
sembly. Refer to
SOPM 20-50-10,
code RH as an ac-
cepted procedure.
Refer to APPENDIX
A for new part num-
bers and part mark-
ing methods. Re-
move existing part
markings.
--Part MarkApply8
(a) Bushing bores must be concentric within 0.0005 inches.
(b) Final bushing bore diameters must be within 0.0015 inches of each other.
FIGURE 2: INNER CYLINDER CHANGE
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
29 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 30

Group 1:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
Center Axle Component and Assembly
(a) (b)Rubber Stamp, Code
RH (e)
161W1163-9Center Axle Assembly161W1163-9
(a) (b)Electrochemical Etch or
Vibro-engrave (e)
161W1163-10. Center Axle161W1163-10
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1163-21Center Axle Assembly161W1163-15
(a) (c)
(d)
Electrochemical Etch or
Vibro-engrave (e)
161W1163-22. Center Axle161W1163-16
Inner Cylinder Assembly
(a) (b)Rubber Stamp, Code
RH (e)
161W2120-1Inner Cylinder Assem-
bly
161W2120-1
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W2120-5Inner Cylinder Assem-
bly
161W2120-3
MLG Component Assembly
(a) (b)Name Plate Vibro-en-
grave (e)
161W2100-1MLG Component As-
sembly
161W2100-1
(a) (b)Name Plate Vibro-en-
grave (e)
161W2100-2MLG Component As-
sembly
161W2100-2
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W2100-7MLG Component As-
sembly
161W2100-3
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W2100-8MLG Component As-
sembly
161W2100-4
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W2100-9MLG Component As-
sembly
161W2100-5
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W2100-10MLG Component As-
sembly
161W2100-6
MLG Buildup Assembly
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-43MLG Buildup Assembly161W1000-43
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-44MLG Buildup Assembly161W1000-44
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-45MLG Buildup Assembly161W1000-45
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-46MLG Buildup Assembly161W1000-46
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 1 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
30 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 31

Group 1:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-55MLG Buildup Assembly161W1000-55
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-56MLG Buildup Assembly161W1000-56
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-57MLG Buildup Assembly161W1000-57
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-58MLG Buildup Assembly161W1000-58
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-83MLG Buildup Assembly161W1000-59
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-84MLG Buildup Assembly161W1000-60
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-67MLG Buildup Assembly161W1000-67
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-68MLG Buildup Assembly161W1000-68
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-69MLG Buildup Assembly161W1000-69
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-70MLG Buildup Assembly161W1000-70
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-81MLG Buildup Assembly161W1000-71
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-82MLG Buildup Assembly161W1000-72
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-73MLG Buildup Assembly161W1000-73
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-74MLG Buildup Assembly161W1000-74
(a) Make the change in accordance with this service bulletin.
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that the change
done in accordance with this service bulletin was made.
(c) This is the part number after the change is done in accordance with this service bulletin.
(d) This part is used in production.
(e) Refer to SOPM 20-50-10 as an accepted procedure.
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 2 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
31 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 32

Group 2:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
Center Axle Component and Assembly
(a) (b)Rubber Stamp, Code
RH (e)
161W1163-1Center Axle Assembly161W1163-1
(a) (b)Electrochemical Etch or
Vibro-engrave (e)
161W1163-2. Center Axle161W1163-2
(a) (b)Rubber Stamp, Code
RH (e)
161W1163-3Center Axle Assembly161W1163-3
(a) (b)Electrochemical Etch or
Vibro-engrave (e)
161W1163-4. Center Axle161W1163-4
(a) (b)Rubber Stamp, Code
RH (e)
161W1163-5Center Axle Assembly161W1163-5
(a) (b)Electrochemical Etch or
Vibro-engrave (e)
161W1163-6. Center Axle161W1163-6
(a) (b)Rubber Stamp, Code
RH (e)
161W1163-7Center Axle Assembly161W1163-7
(a) (b)Electrochemical Etch or
Vibro-engrave (e)
161W1163-8. Center Axle161W1163-8
(a) (b)Rubber Stamp, Code
RH (e)
161W1163-9Center Axle Assembly161W1163-9
(a) (b)Electrochemical Etch or
Vibro-engrave (e)
161W1163-10. Center Axle161W1163-10
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1163-17Center Axle Assembly161W1163-11
(a) (c)
(d)
Electrochemical Etch or
Vibro-engrave (e)
161W1163-18. Center Axle161W1163-12
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1163-19Center Axle Assembly161W1163-13
(a) (c)
(d)
Electrochemical Etch or
Vibro-engrave (e)
161W1163-20. Center Axle161W1163-14
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1163-21Center Axle Assembly161W1163-15
(a) (c)
(d)
Electrochemical Etch or
Vibro-engrave (e)
161W1163-22. Center Axle161W1163-16
Inner Cylinder Assembly
(a) (b)Rubber Stamp, Code
RH (e)
161W1120-3Inner Cylinder Assem-
bly
161W1120-3
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 3 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
32 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 33

Group 2:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1120-7Inner Cylinder Assem-
bly
161W1120-5
(a) (b)Rubber Stamp, Code
RH (e)
161W1255-1Inner Cylinder Assem-
bly
161W1255-1
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1255-9Inner Cylinder Assem-
bly
161W1255-5
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1255-10Inner Cylinder Assem-
bly
161W1255-7
MLG Component Assembly
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-1MLG Component As-
sembly
161W1100-1
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-2MLG Component As-
sembly
161W1100-2
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-3MLG Component As-
sembly
161W1100-3
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-4MLG Component As-
sembly
161W1100-4
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-5MLG Component As-
sembly
161W1100-5
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-6MLG Component As-
sembly
161W1100-6
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-7MLG Component As-
sembly
161W1100-7
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-8MLG Component As-
sembly
161W1100-8
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-9MLG Component As-
sembly
161W1100-9
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-10MLG Component As-
sembly
161W1100-10
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-11MLG Component As-
sembly
161W1100-11
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-12MLG Component As-
sembly
161W1100-12
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-15MLG Component As-
sembly
161W1100-15
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 4 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
33 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 34

Group 2:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-16MLG Component As-
sembly
161W1100-16
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-17MLG Component As-
sembly
161W1100-17
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-18MLG Component As-
sembly
161W1100-18
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-19MLG Component As-
sembly
161W1100-19
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-20MLG Component As-
sembly
161W1100-20
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-21MLG Component As-
sembly
161W1100-21
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-22MLG Component As-
sembly
161W1100-22
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-23MLG Component As-
sembly
161W1100-23
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-24MLG Component As-
sembly
161W1100-24
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W1100-33MLG Component As-
sembly
161W1100-25
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W1100-34MLG Component As-
sembly
161W1100-26
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W1100-35MLG Component As-
sembly
161W1100-27
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W1100-36MLG Component As-
sembly
161W1100-28
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W1100-37MLG Component As-
sembly
161W1100-29
(a) (c)
(d)
Name Plate Vibro-en-
grave (e)
161W1100-38MLG Component As-
sembly
161W1100-30
(a) (b)Name Plate Vibro-en-
grave (e)
161W1100-31MLG Component As-
sembly
161W1100-31
MLG Buildup Assembly
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-3MLG Buildup Assembly161W1000-3
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 5 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
34 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 35

Group 2:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-4MLG Buildup Assembly161W1000-4
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-5MLG Buildup Assembly161W1000-5
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-6MLG Buildup Assembly161W1000-6
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-7MLG Buildup Assembly161W1000-7
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-8MLG Buildup Assembly161W1000-8
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-9MLG Buildup Assembly161W1000-9
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-10MLG Buildup Assembly161W1000-10
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-11MLG Buildup Assembly161W1000-11
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-12MLG Buildup Assembly161W1000-12
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-13MLG Buildup Assembly161W1000-13
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-14MLG Buildup Assembly161W1000-14
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-15MLG Buildup Assembly161W1000-15
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-16MLG Buildup Assembly161W1000-16
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-17MLG Buildup Assembly161W1000-17
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-18MLG Buildup Assembly161W1000-18
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-19MLG Buildup Assembly161W1000-19
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-20MLG Buildup Assembly161W1000-20
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-21MLG Buildup Assembly161W1000-21
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 6 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
35 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 36

Group 2:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-22MLG Buildup Assembly161W1000-22
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-23MLG Buildup Assembly161W1000-23
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-24MLG Buildup Assembly161W1000-24
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-25MLG Buildup Assembly161W1000-25
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-26MLG Buildup Assembly161W1000-26
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-27MLG Buildup Assembly161W1000-27
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-28MLG Buildup Assembly161W1000-28
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-35MLG Buildup Assembly161W1000-35
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-36MLG Buildup Assembly161W1000-36
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-37MLG Buildup Assembly161W1000-37
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-38MLG Buildup Assembly161W1000-38
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-39MLG Buildup Assembly161W1000-39
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-40MLG Buildup Assembly161W1000-40
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-41MLG Buildup Assembly161W1000-41
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-42MLG Buildup Assembly161W1000-42
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-47MLG Buildup Assembly161W1000-47
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-48MLG Buildup Assembly161W1000-48
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-49MLG Buildup Assembly161W1000-49
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 7 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
36 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 37

Group 2:
NotesPart Marking MethodNew Part NumberComponent NameExisting Part Number
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-50MLG Buildup Assembly161W1000-50
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-51MLG Buildup Assembly161W1000-51
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-52MLG Buildup Assembly161W1000-52
(a) (b)Rubber Stamp, Code
RH (e)
161W1000-53MLG Buildup Assembly161W1000-53
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-75MLG Buildup Assembly161W1000-61
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-76MLG Buildup Assembly161W1000-62
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-77MLG Buildup Assembly161W1000-63
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-78MLG Buildup Assembly161W1000-64
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-79MLG Buildup Assembly161W1000-65
(a) (c)
(d)
Rubber Stamp, Code
RH (e)
161W1000-80MLG Buildup Assembly161W1000-66
(a) Make the change in accordance with this service bulletin.
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that the change
done in accordance with this service bulletin was made.
(c) This is the part number after the change is done in accordance with this service bulletin.
(d) This part is used in production.
(e) Refer to SOPM 20-50-10 as an accepted procedure.
APPENDIX A:  PART MARKING REIDENTIFICATION TABLE
(SHEET 8 OF 8)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
37 of 38
BOEING SERVICE BULLETIN 777-32-0085

### Page 38

Applicable Inner Cylinder
Assemblies (a)
Applicable Center Axle
Assemblies (a)
Maximum Taxi Gross
Weight
Airplane Model
161W1120-3, -7 (b)161W1163-1, -3, -5, -7, -9,
-17, -19, -21 (b)
547,000 lbs777-200
161W1255-1, -9, -10 (b)
161W1255-1, -9, -10 (b)161W1163-1, -3, -5, -7, -9,
-17, -19, -21 (b)
652,000 lbs777-200ER
161W1255-10 (b)161W1163-3, -7, -9, -19, -
21 (b)
658,000 lbs777-200ER/IGW
161W1255-10 (b)161W1163-3, -7, -9, -19, -
21 (b)
662,000 lbs777-300
161W2120-1, -5 (b)161W1163-9, -21 (b)768,800 lbs777-200LR
161W2120-1, -5 (b)161W1163-9, -21 (b)777,000 lbs777-300ER
161W2120-1, -5 (b)161W1163-9, -21 (b)768,800 lbs777F
(a) Refer to 777-SL-32-001 for additional interchangeability information.
(b) Make sure every part used has been changed in accordance with this service bulletin.
APPENDIX B: CENTER AXLE ASSEMBLY AND INNER CYLINDER ASSEMBLY INTERCHANGEABILITY
BASED ON AIRPLANE MINOR MODEL
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 14, 2011
777-32-0085
38 of 38
BOEING SERVICE BULLETIN 777-32-0085

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
