# Boeing Special Attention Service Bulletin 777-35-0041: BOEING SB-777-35-0041-00

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9047; AD 2016-18-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 777-35-0041](https://openairdocs.org/service-documents/boeing/sb-777-35-0041.md)
- Title as filed: BOEING SB-777-35-0041-00
- Pages: 127
- PDF: https://openairdocs.org/files/sha256/ce/07/ce0748c60d8a49158fe82040cf73cc9db7e1ac23a61037359cb966b67935a8ac
- Page: https://openairdocs.org/service-documents/boeing/sb-777-35-0041/file/ce0748c60d8a

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-35-0041
Original Issue: April 08, 2016
ATA System: 3522
SUBJECT: OXYGEN - Passenger Oxygen System - Gaseous - Low-Pressure Oxygen Flex Hoses
Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: April 08, 2016
777-35-0041
1 of 127
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
2 of 127
BOEING SERVICE BULLETIN 777-35-0041
BLANK PAGE

### Page 3

Table of Contents
S u m m a r y  ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A . E f f e c t i v i t y  ................................................ 9
1. Airplanes ............................................. 9
2 . S p a r e s  A f f e c t e d  ........................................ 1 0
B. Concurrent Requirements ...................................... 1 0
C. Reason ................................................ 1 0
D. Description .............................................. 1 0
E. Compliance .............................................. 1 1
F . A p p r o v a l  ............................................... 1 1
G. Manpower .............................................. 1 1
H. Weight and Balance Changes .................................... 1 5
I. Electrical Load Data ......................................... 1 5
J . R e f e r e n c e s  .............................................. 1 5
1. Existing Data: ......................................... 1 5
2. Data Supplied with this Service Bulletin: ........................... 1 6
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 6
K. Publications Affected ........................................ 1 6
L. Interchangeability and Intermixability of Parts ........................... 1 6
M. Software Accomplishment Summary ................................ 1 6
2. MATERIAL INFORMATION ........................................ 1 7
A. Material - Price and Availability ................................... 1 7
B. Industry Support Information .................................... 1 8
C. Parts Necessary for Each Airplane ................................. 1 8
1 . K i t s / P a r t s  ............................................ 1 8
2. Parts and Materials Supplied by the Operator ........................ 2 6
3. Parts Modified and Reidentified ................................ 2 6
4. Parts Removed and Not Replaced .............................. 2 7
D. Parts Necessary to Change Spares ................................. 2 7
E. Special Tooling - Price and Availability ............................... 2 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 9
A. GENERAL INFORMATION ..................................... 2 9
B. WORK INSTRUCTIONS ....................................... 3 1
FIGURE 1: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
1 - 2 ]  ............................................... 3 7
FIGURE 2: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
3 - 4 ]  ............................................... 4 0
FIGURE 3: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
3 ]  ................................................ 4 4
FIGURE 4: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
4 ]  ................................................ 4 8
FIGURE 5: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 1-2]
.................................................. 5 3
FIGURE 6: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4]
.................................................. 5 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
3 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 4

FIGURE 7: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3]
.................................................. 6 1
FIGURE 8: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 4]
.................................................. 6 3
FIGURE 9: FORWARD RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
1 - 2 ]  ............................................... 6 7
FIGURE 10: FORWARD RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
3 - 4 ]  ............................................... 6 9
FIGURE 11: FORWARD RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
3 ]  ................................................ 7 3
FIGURE 12: FORWARD RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group
4 ]  ................................................ 7 7
FIGURE 13: AFT LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 1-2] . 82
FIGURE 14: AFT LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4] . 85
FIGURE 15: AFT LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4] . 88
FIGURE 16: AFT LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4] . 92
FIGURE 17: AFT CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 1] . . 95
FIGURE 18: AFT CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 2] . . 98
FIGURE 19: AFT CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3] . 102
FIGURE 20: AFT CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4] . 105
FIGURE 21: AFT CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 4] . 108
FIGURE 22: AFT RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 1] . 111
FIGURE 23: AFT RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 2] . 114
FIGURE 24: AFT RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4]
................................................. 1 1 7
FIGURE 25: AFT RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4]
................................................. 1 2 0
FIGURE 26: AFT RIGHT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT [Group 3-4]
................................................. 1 2 4
APPENDIX A: PART DEMAND INTENT ................................... 1 2 7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
4 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 5

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 777-35-0041Original Issue: April 08, 2016
ATA System: 3522
SUBJECT: OXYGEN - Passenger Oxygen System - Gaseous - Low-Pressure Oxygen Flex Hoses
Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin will make sure that the low-pressure oxygen flex hoses in the therapeutic gaseous oxygen
system for the passenger cabin are non conductive. If this service bulletin is not done the low-pressure oxygen
flex hoses can potentially be conductive, become heated from electrical faults and cause or contribute to an
oxygen-fed fire event that could jeopardize continued safe flight and landing.
A Boeing investigation discovered that the low-pressure oxygen flex hoses in the therapeutic gaseous oxygen
system can potentially be conductive. The therapeutic gaseous oxygen system is not continuously pressurized
and must be activated by the flight crew. Exposure to electrical faults, such as unintended short circuits, can
result in localized electrical heating of the low-pressure oxygen flex hoses.
This service bulletin installs low-pressure oxygen flex hoses that are non conductive to make sure no localized
electrical heating occurs if exposed to an unintended electrical fault.
Boeing Service Related Problem (SRP) 777-SRP-35-0063 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 777 FTD 35-14003 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
5 of 127

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 62777-105S)
Remove main ceiling panels and outboard stowage bin modules to access low-pressure oxygen flex hoses.
Remove existing low-pressure oxygen flex hoses. Install non-conductive low-pressure oxygen flex hoses. Perform
Leak Check. Install main ceiling panels and outboard stowage bin modules removed to gain access to low-pressure
oxygen flex hoses.
EFFECTIVITY
777-200/300ER Airplane(s) with therapeutic gaseous oxygen system. Refer to Paragraph 1.A.1., Airplanes, for
the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 2250 days after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of September 30, 2011. Please refer to
Paragraph 2.B., Industry Support Information. The warranty remedies will expire eight years from the original
issue date of this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Operators are encouraged to complete the survey provided in APPENDIX A of this service bulletin to help Boeing
predict the quantity and timing of the Boeing Supplied Kits/Parts.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
6 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
REMOVE MAIN CEILING PANELS AND OUTBOARD STOWAGE BIN MODULES
TO ACCESS LOW PRESSURE OXYGEN FLEX HOSES.
REMOVE EXISTING LOW PRESSURE OXYGEN FLEX HOSES
INSTALL NON-CONDUCTIVE LOW PRESSURE OXYGEN FLEX HOSES.
PERFORM LEAK CHECK.
INSTALL MAIN CEILING PANELS AND OUTBOARD STOWAGE BIN MODULES
REMOVED TO GAIN ACCESS TO LOW PRESSURE OXYGEN FLEX HOSES.
2452073
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  7 of 127

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
8 of 127
BOEING SERVICE BULLETIN 777-35-0041
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
SPECIAL ATTENTION
Number: 777-35-0041
Original Issue: April 08, 2016
ATA System: 3522
SUBJECT: OXYGEN - Passenger Oxygen System - Gaseous - Low-Pressure Oxygen Flex Hoses
Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 777-200/300ER Airplanes, line numbers 6 to 1221 in 4 Group(s).
The Variable Numbers and Group Information for the applicable airplanes is given below. An
equivalent change is on subsequent production airplanes. Refer to PRR 62777-105S for data
about this change.
DESCRIPTIONCONFIGURATIONGROUP
777-200 Non-Overhead Space Utilization (OSU) Airplanes with
non-OSU loop.
-1
777-200 Non-Overhead Space Utilization (OSU) Airplanes with OSU
loop.
-2
777-300ER Airplanes with unique low-pressure oxygen hoses
configuration.
-3
777-300ER Airplanes with unique low-pressure oxygen hoses
configuration.
-4
Airplane Models:
777-200, 777-300ER
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
9 of 127

### Page 10

GroupVariable Number
1WA076 - WA079
1WB001 - WB021
1WB031 - WB042
1WB044 - WB046
1WB411 - WB413
2WC571 - WC574
4WD966 - WD970
3WE071 - WE078
3WE081 - WE084
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin will make sure that the low-pressure oxygen flex hoses in the therapeutic gaseous
oxygen system for the passenger cabin are non conductive. If this service bulletin is not done the
low-pressure oxygen flex hoses can potentially be conductive, become heated from electrical faults
and cause or contribute to an oxygen-fed fire event that could jeopardize continued safe flight and
landing.
A Boeing investigation discovered that the low-pressure oxygen flex hoses in the therapeutic gaseous
oxygen system can potentially be conductive. The therapeutic gaseous oxygen system is not continuously
pressurized and must be activated by the flight crew. Exposure to electrical faults, such as unintended
short circuits, can result in localized electrical heating of the low-pressure oxygen flex hoses.
This service bulletin installs low-pressure oxygen flex hoses that are non conductive to make sure no
localized electrical heating occurs if exposed to an unintended electrical fault.
Boeing Service Related Problem (SRP) 777-SRP-35-0063 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 777 FTD 35-14003 is related to this service bulletin.
D. Description
Remove main ceiling panels and outboard stowage bin modules to access low-pressure oxygen flex
hoses. Remove existing low-pressure oxygen flex hoses. Install non-conductive low-pressure oxygen
flex hoses. Perform Leak Check. Install main ceiling panels and outboard stowage bin modules removed
to gain access to low-pressure oxygen flex hoses.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
10 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 11

The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-2:
Affected Maintenance Zones
ZoneModel
223, 224, 233, 234, 253, 254, 263, 264777-200
Group 3-4:
Affected Maintenance Zones
ZoneModel
223, 224, 233, 234, 243, 244, 253, 254, 263, 264777-300ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 2250 days after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
11 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 12

Group 1-2:
Work Package 1 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT BETWEEN STA 325
- STA 1105
Elapsed HoursTask HoursNumber of PersonsTask
0.750.751Open Access
1.701.701FIGURE 1
1.101.101FIGURE 5
1.101.101FIGURE 9
0.350.351Do Leak Detection
0.750.751Close Access
5.755.75TOTAL FOR WORK PACKAGE 1
Group 1-2:
Work Package Number 1 can be done at the same time as Work Package Number 2.
Group 3:
Work Package 1 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT BETWEEN STA 325
- STA 1105
Elapsed HoursTask HoursNumber of PersonsTask
1.751.751Open Access
1.601.601FIGURE 2
1.501.501FIGURE 3
2.002.001FIGURE 6
1.501.501FIGURE 7
1.601.601FIGURE 10
1.501.501FIGURE 11
0.950.951Do Leak Detection
1.751.751Close Access
14.1514.15TOTAL FOR WORK PACKAGE 1
Group 3:
Work Package Number 1 can be done at the same time as Work Package Number 2.
Group 4:
Work Package 1 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT BETWEEN STA 325
- STA 1105
Elapsed HoursTask HoursNumber of PersonsTask
2.402.401Open Access
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
12 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 13

Group 4:
Work Package 1 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT BETWEEN STA 325
- STA 1105
Elapsed HoursTask HoursNumber of PersonsTask
1.601.601FIGURE 2
1.901.901FIGURE 4
2.002.001FIGURE 6
1.901.901FIGURE 8
1.601.601FIGURE 10
1.901.901FIGURE 12
1.101.101Do Leak Detection
2.402.401Close Access
16.8016.80TOTAL FOR WORK PACKAGE 1
Group 4:
Work Package Number 1 can be done at the same time as Work Package Number 2.
Group 1:
Work Package 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
Elapsed HoursTask HoursNumber of PersonsTask
0.750.751Open Access
1.701.701FIGURE 13
1.701.701FIGURE 17
1.701.701FIGURE 22
0.450.451Do Leak Detection
0.750.751Close Access
7.057.05TOTAL FOR WORK PACKAGE 2
Group 1:
Work Package Number 2 can be done at the same time as Work Package Number 1.
Group 2:
Work Package 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
Elapsed HoursTask HoursNumber of PersonsTask
0.750.751Open Access
1.701.701FIGURE 13
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
13 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 14

Group 2:
Work Package 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
Elapsed HoursTask HoursNumber of PersonsTask
1.701.701FIGURE 18
1.701.701FIGURE 23
0.450.451Do Leak Detection
0.750.751Close Access
7.057.05TOTAL FOR WORK PACKAGE 2
Group 2:
Work Package Number 2 can be done at the same time as Work Package Number 1.
Group 3:
Work Package 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
Elapsed HoursTask HoursNumber of PersonsTask
1.251.251Open Access
1.501.501FIGURE 14
1.601.601FIGURE 15
1.601.601FIGURE 16
1.501.501FIGURE 19
1.101.101FIGURE 20
1.501.501FIGURE 24
1.601.601FIGURE 25
1.601.601FIGURE 26
1.151.151Do Leak Detection
1.251.251Close Access
15.6515.65TOTAL FOR WORK PACKAGE 2
Group 3:
Work Package Number 2 can be done at the same time as Work Package Number 1.
Group 4:
Work Package 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
Elapsed HoursTask HoursNumber of PersonsTask
1.251.251Open Access
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
14 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 15

Group 4:
Work Package 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
Elapsed HoursTask HoursNumber of PersonsTask
1.501.501FIGURE 14
1.601.601FIGURE 15
1.601.601FIGURE 16
1.101.101FIGURE 20
1.501.501FIGURE 21
1.501.501FIGURE 24
1.601.601FIGURE 25
1.601.601FIGURE 26
1.151.151Do Leak Detection
1.251.251Close Access
15.6515.65TOTAL FOR WORK PACKAGE 2
Group 4:
Work Package Number 2 can be done at the same time as Work Package Number 1.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 62777-105S
b. Boeing Service Related Problem (SRP) 777-SRP-35-0063
c. Service Bulletin Index D624W001
d. Standard Overhaul Practices Manual (SOPM) 20-50-01, 20-70-01
e. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19
f. 777 Aircraft Maintenance Manual (AMM) 25-21-06, 25-28-01, 35-00-00
g. 777 Fleet Team Digest (FTD) 35-14003
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
15 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 16

2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
FLEX HOSE INSTL - GASEOUS OXYGEN474W2010
FLEX HOSE INSTL - GASEOUS OXYGEN, PASSENGER474W2020
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-29, 35-11, 35-22, 35-23777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
16 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 17

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$5,159.002981December 08,
2015
KIT-RETROFIT - 777
NON-CONDUCTIVE
FLEX HOSE
RETROFIT KIT.
005W0037-1
41April 06, 2016
Group 2:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$5,849.002984April 06, 2016KIT-RETROFIT - 777
NON-CONDUCTIVE
FLEX HOSE
RETROFIT KIT.
005W0037-2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
17 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 18

Group 3:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$14,035.0029812April 06, 2016KIT-RETROFIT - 777
NON-CONDUCTIVE
FLEX HOSE
RETROFIT KIT.
005W0037-3
Group 4:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$15,173.002985April 06, 2016KIT-RETROFIT - 777
NON-CONDUCTIVE
FLEX HOSE
RETROFIT KIT.
005W0037-4
Operators are encouraged to complete the survey provided in APPENDIX A of this service bulletin to
help Boeing predict the quantity and timing of the Boeing Supplied Kits/Parts.
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of September 30, 2011. For
task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Fleet Support Contracts - Warranty. The kits for airplanes in warranty as of that date will be supplied
at no charge. Send a purchase order for the kits to Boeing Material Management. Please refer to this
service bulletin number and reference the airplane variable numbers in your purchase order. The
warranty remedies will expire eight years from the original issue date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
18 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 19

Figure Kit
654321Top Kit
-1---1005W0037-1
-1---1005W0037-2
1--11-005W0037-3
1-1-1-005W0037-4
Figure Kit
121110987Top Kit
---1--005W0037-1
---1--005W0037-2
-11--1005W0037-3
1-1-1-005W0037-4
Figure Kit
181716151413Top Kit
-1---1005W0037-1
1----1005W0037-2
--111-005W0037-3
--111-005W0037-4
Figure Kit
242322212019Top Kit
--1---005W0037-1
-1----005W0037-2
1---11005W0037-3
1--11-005W0037-4
Figure Kit
2625Top Kit
11005W0037-3
11005W0037-4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
19 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 20

Group 1:
KIT 005W0037-1
Notes
Existing Part
NumberName
Figure
New Part Number
221713951
Qty
(c) (d)O-RING ASSY.3...2474W2090-30
(c) (e)O-RING ASSY7.76.6474W2090-31
(c) (f)O-RING ASSY.9..7.474W2090-32
(c) (g)O-RING ASSY..2...474W2090-33
(a) (b)57034-10A040240HOSE ASSY.....157034-21N040240
(a) (b)57034-10A040380HOSE ASSY.1....57034-21N040380
(a) (b)57034-10A100066HOSE ASSY1.1...57034-21N100066
(a) (b)57034-10A100150HOSE ASSY1.....57034-21N100150
(a) (b)57034-10A100180HOSE ASSY...2.257034-21N100180
(a) (b)57034-10A100220HOSE ASSY1.1...57034-21N100220
(a) (b)57034-10A120180HOSE ASSY.1..1.57034-21N120180
(a) (b)57034-10A120375HOSE ASSY....1.57034-21N120375
(a) (b)57034-10A120480HOSE ASSY.1....57034-21N120480
(a) (b)57034-10A100110HOSE ASSY..1...57034-22N100110
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-017 lubricated with MIL-G-27617 is equivalent to 474W2090-31.
(f) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(g) M83248/1-214 lubricated with MIL-G-27617 is equivalent to 474W2090-33.
Group 2:
KIT 005W0037-2
Notes
Existing Part
NumberName
Figure
New Part Number
231813951
Qty
(c) (d)O-RING ASSY.3...2474W2090-30
(c) (e)O-RING ASSY7.76.6474W2090-31
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
20 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 21

Group 2:
KIT 005W0037-2
Notes
Existing Part
NumberName
Figure
New Part Number
231813951
Qty
(c) (f)O-RING ASSY36..7.474W2090-32
(c) (g)O-RING ASSY..2...474W2090-33
(a) (b)57034-10A040240HOSE ASSY.....157034-21N040240
(a) (b)57034-10A040380HOSE ASSY.1....57034-21N040380
(a) (b)57034-10A100066HOSE ASSY1.1...57034-21N100066
(a) (b)57034-10A100180HOSE ASSY...2.257034-21N100180
(a) (b)57034-10A100220HOSE ASSY1.1...57034-21N100220
(a) (b)57034-10A120180HOSE ASSY.1..1.57034-21N120180
(a) (b)57034-10A120375HOSE ASSY....1.57034-21N120375
(a) (b)57034-10A120735HOSE ASSY.1....57034-21N120735
(a) (b)57034-10A100110HOSE ASSY..1...57034-22N100110
(a) (b)57034-10A100151HOSE ASSY1.....57034-22N100151
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-017 lubricated with MIL-G-27617 is equivalent to 474W2090-31.
(f) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(g) M83248/1-214 lubricated with MIL-G-27617 is equivalent to 474W2090-33.
Group 3:
KIT 005W0037-3
Notes
Existing Part
NumberName
Figure
New Part Number
11107632
Qty
(c) (d)O-RING ASSY.2.2.2474W2090-30
(c) (e)O-RING ASSY444744474W2090-32
(a) (b)57034-10A040130HOSE ASSY.1.1.157034-21N040130
(a) (b)57034-10A120160HOSE ASSY.1...157034-21N120160
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
21 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 22

Group 3:
KIT 005W0037-3
Notes
Existing Part
NumberName
Figure
New Part Number
11107632
Qty
(a) (b)57034-10A120180HOSE ASSY...1..57034-21N120180
(a) (b)57034-10A120192HOSE ASSY1.1.1.57034-21N120192
(a) (b)57034-28A100260HOSE ASSY..11..57034-41N100260
(a) (b)57034-28A100275HOSE ASSY...1..57034-41N100275
(a) (b)57034-28A100300HOSE ASSY..1...57034-41N100300
(a) (b)57034-28A100490HOSE ASSY11..1157034-41N100490
(a) (b)57034-28A100570HOSE ASSY1...1.57034-41N100570
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
Group 3:
KIT 005W0037-3
Notes
Existing Part
NumberName
Figure
New Part Number
242019161514
Qty
(c) (d)O-RING ASSY...3.1474W2090-30
(c) (e)O-RING ASSY744347474W2090-32
(c) (f)O-RING ASSY....1.474W2090-33
(a) (b)57034-10A040115HOSE ASSY...1..57034-21N040115
(a) (b)57034-10A120150HOSE ASSY.1....57034-21N120150
(a) (b)57034-10A120180HOSE ASSY....1.57034-21N120180
(a) (b)57034-10A120190HOSE ASSY1....157034-21N120190
(a) (b)57034-10A120192HOSE ASSY..1...57034-21N120192
(a) (b)57034-10A120205HOSE ASSY...1..57034-21N120205
(a) (b)57034-10A120340HOSE ASSY.1....57034-21N120340
(a) (b)57034-10A120110HOSE ASSY....1.57034-22N120110
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
22 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 23

Group 3:
KIT 005W0037-3
Notes
Existing Part
NumberName
Figure
New Part Number
242019161514
Qty
(a) (b)57034-28A100275HOSE ASSY..2...57034-41N100275
(a) (b)57034-28A100490HOSE ASSY2..1.257034-41N100490
(a) (b)57034-28A100590HOSE ASSY....1.57034-41N100590
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(f) M83248/1-214 lubricated with MIL-G-27617 is equivalent to 474W2090-33.
Group 3:
KIT 005W0037-3
Notes
Existing Part
NumberName
Figure
New Part Number
2625
Qty
(c) (d)O-RING ASSY2.474W2090-30
(c) (e)O-RING ASSY34474W2090-32
(c) (f)O-RING ASSY.1474W2090-33
(a) (b)57034-10A040115HOSE ASSY1.57034-21N040115
(a) (b)57034-10A120170HOSE ASSY.157034-21N120170
(a) (b)57034-10A120180HOSE ASSY.157034-21N120180
(a) (b)57034-10A120205HOSE ASSY1.57034-21N120205
(a) (b)57034-28A100490HOSE ASSY1.57034-41N100490
(a) (b)57034-28A100590HOSE ASSY.157034-41N100590
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
23 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 24

Group 3:
KIT 005W0037-3
Notes
Existing Part
NumberName
Figure
New Part Number
2625
Qty
(f) M83248/1-214 lubricated with MIL-G-27617 is equivalent to 474W2090-33.
Group 4:
KIT 005W0037-4
Notes
Existing Part
NumberName
Figure
New Part Number
12108642
Qty
(c) (d)O-RING ASSY121212474W2090-30
(c) (e)O-RING ASSY444744474W2090-32
(a) (b)57034-10A040130HOSE ASSY.1.1.157034-21N040130
(a) (b)57034-10A120160HOSE ASSY.1...157034-21N120160
(a) (b)57034-10A120180HOSE ASSY...1..57034-21N120180
(a) (b)57034-10A120192HOSE ASSY1.1.1.57034-21N120192
(a) (b)57034-28A100260HOSE ASSY..11..57034-41N100260
(a) (b)57034-28A100275HOSE ASSY...1..57034-41N100275
(a) (b)57034-28A100300HOSE ASSY..1...57034-41N100300
(a) (b)57034-28A100490HOSE ASSY11..1157034-41N100490
(a) (b)57034-28A100570HOSE ASSY1...1.57034-41N100570
(a) (b)57034-11A040260HOSE ASSY..1...57034-42N040260
(a) (b)57034-11A040590HOSE ASSY1...1.57034-42N040590
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
24 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 25

Group 4:
KIT 005W0037-4
Notes
Existing Part
NumberName
Figure
New Part Number
242120161514
Qty
(c) (d)O-RING ASSY...3.1474W2090-30
(c) (e)O-RING ASSY744347474W2090-32
(c) (f)O-RING ASSY....1.474W2090-33
(a) (b)57034-10A040115HOSE ASSY...1..57034-21N040115
(a) (b)57034-10A120150HOSE ASSY..1...57034-21N120150
(a) (b)57034-10A120180HOSE ASSY....1.57034-21N120180
(a) (b)57034-10A120190HOSE ASSY1....157034-21N120190
(a) (b)57034-10A120192HOSE ASSY.1....57034-21N120192
(a) (b)57034-10A120205HOSE ASSY...1..57034-21N120205
(a) (b)57034-10A120340HOSE ASSY..1...57034-21N120340
(a) (b)57034-10A120110HOSE ASSY....1.57034-22N120110
(a) (b)57034-28A100205HOSE ASSY.1....57034-41N100205
(a) (b)57034-28A100245HOSE ASSY.1....57034-41N100245
(a) (b)57034-28A100490HOSE ASSY2..1.257034-41N100490
(a) (b)57034-28A100590HOSE ASSY....1.57034-41N100590
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(f) M83248/1-214 lubricated with MIL-G-27617 is equivalent to 474W2090-33.
Group 4:
KIT 005W0037-4
Notes
Existing Part
NumberName
Figure
New Part Number
2625
Qty
(c) (d)O-RING ASSY2.474W2090-30
(c) (e)O-RING ASSY34474W2090-32
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
25 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 26

Group 4:
KIT 005W0037-4
Notes
Existing Part
NumberName
Figure
New Part Number
2625
Qty
(c) (f)O-RING ASSY.1474W2090-33
(a) (b)57034-10A040115HOSE ASSY1.57034-21N040115
(a) (b)57034-10A120170HOSE ASSY.157034-21N120170
(a) (b)57034-10A120180HOSE ASSY.157034-21N120180
(a) (b)57034-10A120205HOSE ASSY1.57034-21N120205
(a) (b)57034-28A100490HOSE ASSY1.57034-41N100490
(a) (b)57034-28A100590HOSE ASSY.157034-41N100590
(a) This part is used in production.
(b) You cannot use the existing part to replace the new or changed part.
(c) There are more parts than are necessary.
(d) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(e) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(f) M83248/1-214 lubricated with MIL-G-27617 is equivalent to 474W2090-33.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesNameQTYPart Number /
Specification
(a) (b)TAPE1
ROLL
BMS 5-179, TYPE
I, CLASS I,
GRADE A
(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(b) Quantity required depends on taping method used.
3. Parts Modified and Reidentified
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
26 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 27

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
27 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 28

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
28 of 127
BOEING SERVICE BULLETIN 777-35-0041
BLANK PAGE

### Page 29

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 777
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
5. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
6. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
7. The necessary conditions for selection of clamp type and size are included in SWPM
20-10-12. If any wire bundle support clamp specified in this service bulletin does not
make a correct fit on the wire bundle, refer to SWPM 20-10-12 as an accepted
procedure to select a clamp that fits correctly.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
29 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 30

8. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
10. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
14. If shading is used, shaded areas in Figures are to separate the non-critical and
non-authoritative information from the critical and authoritative information.
15. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
16. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
17. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
30 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 31

B. WORK INSTRUCTIONS
WORK PACKAGE 1 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT BETWEEN STA
325 - STA 1105
WARNING: DO NOT PERMIT OIL, GREASE, DIRT OR OTHER FLAMMABLE MATERIALS TO GET
NEAR THE PRESSURE OXYGEN SYSTEM. THESE MATERIALS CAN CAUSE A FIRE
OR AN EXPLOSION WHEN THEY ARE NEAR PRESSURIZED OXYGEN.
WARNING: USE ONLY OXYGEN CLEAN COMPONENTS IN THE OXYGEN SYSTEM. IF YOU DO
NOT USE OXYGEN CLEAN COMPONENTS, A FIRE OR EXPLOSION CAN OCCUR.
THIS CAN CAUSE DAMAGE TO EQUIPMENT OR INJURIES TO PERSONS.
WARNING: USE ONLY LUBRICANT MIL-G-27617 TO LUBRICATE THE O-RINGS. OTHER
LUBRICANTS CAN CAUSE A FIRE TO OCCUR.
CAUTION: LUBRICATE THE O-RINGS WITH LUBRICANT MIL-G-27617 ONLY. IF YOU DO NOT
DO THIS, IT CAN CAUSE DAMAGE TO THE O-RINGS.
CAUTION: SPECIAL CARE MUST BE USED WHEN OXYGEN COMPONENTS ARE HANDLED
AND WORKED WITH. BEFORE WORK IS DONE OF THE OXYGEN SYSTEM, READ
THE SAFETY AND MAINTENANCE PROCEDURES. REFER TO 777 AMM 35-00-00
AND SOPM 20-70-01 AS ACCEPTED PROCEDURES.
CAUTION: OBEY THE PRECAUTIONS IN THE OXYGEN MAINTENANCE PRACTICES
PROCEDURE AMM TASK 777 AMM 35-00-00. A FIRE OR EXPLOSION CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT IF YOU DO NOT OBEY THE
PRECAUTIONS.
CAUTION: MAXIMUM PERMITTED OPEN TIME FOR OXYGEN TUBES, HOSES AND
COMPONENTS IS 5 MINUTES.
CAUTION: DO NOT TIGHTEN THE SHUTOFF VALVE ON THE OXYGEN CYLINDER TO A TORQUE
OF MORE THAN 25 POUND-INCHES. THIS CAN CAUSE DAMAGE TO THE SHUTOFF
VALVE.
CAUTION: DURING REPLACEMENT OF THE LOW-PRESSURE OXYGEN FLEX HOSES, THE
EXISTING CLAMP LOCATIONS MUST BE USED. THE EXISTING ROUTING OF THE
LOW-PRESSURE OXYGEN FLEX HOSES MUST BE MAINTAINED. ROTATE CLAMPS
TO MAKE SURE THE LOW-PRESSURE OXYGEN FLEX HOSES WILL NOT BE IN
CONTACT WITH ADJACENT STRUCTURE WHICH COULD CUT, FRAY, KINK,
FLATTEN, OR PERMANENTLY DEFORM THE LOW-PRESSURE OXYGEN FLEX
HOSES. MINIMUM WIRE SEPARATION DISTANCE TO THE LOW-PRESSURE OXYGEN
FLEX HOSES MUST BE MAINTAINED. REFER TO THE SWPM 20-10-11 FOR WIRE
SEPARATION REQUIREMENTS.
1. Close oxygen cylinder shutoff valve. Refer to 777 AMM 35-00-00 as an accepted procedure.
2. Group 1-2:
Remove left and right side main ceiling panels to gain access to the low-pressure oxygen flex
hoses at the approximate location as identified in the table below. Refer to 777 AMM 25-21-06 as
an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
31 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 32

Sta. 395 - Sta. 400
Sta. 525 - Sta. 570
Sta. 960 - Sta. 990
3. Group 3:
Remove left and right side main ceiling panels to gain access to the low-pressure oxygen flex
hoses at the approximate location as identified in the table below. Refer to 777 AMM 25-21-06 as
an accepted procedure.
Sta. 325 - Sta. 335
Sta. 385 - Sta. 395
Sta. 540 - Sta. 560
Sta. 840 - Sta. 890
4. Group 4:
Remove left and right side main ceiling panels to gain access to the low-pressure oxygen flex
hoses at the approximate location as identified in the table below. Refer to 777 AMM 25-21-06 as
an accepted procedure.
Sta. 325 - Sta. 335
Sta. 385 - Sta. 395
Sta. 540 - Sta. 560
Sta. 825 +35 - Sta. 825 +50
Sta. 840 - Sta. 890
5. Group 3-4:
Remove left and right side outboard stowage bin modules to gain access to the low-pressure
oxygen flex hoses at the approximate location as identified in the table below. Refer to 777 AMM
25-28-01 as an accepted procedure.
Sta. 540 - Sta. 560
Sta. 840 - Sta. 890
6. Group 4:
Remove left and right side outboard stowage bin modules to gain access to the low-pressure
oxygen flex hoses at the approximate location as identified in the table below. Refer to 777 AMM
25-28-01 as an accepted procedure.
Sta. 825 +35 - Sta. 825 +50
7. Group 1-2:
RC - Replace forward left side low-pressure oxygen flex hoses in accordance with FIGURE 1.
8. Group 3-4:
RC - Replace forward left side low-pressure oxygen flex hoses in accordance with FIGURE 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
32 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 33

9. Group 3:
RC - Replace forward left side low-pressure oxygen flex hoses in accordance with FIGURE 3.
10. Group 4:
RC - Replace forward left side low-pressure oxygen flex hoses in accordance with FIGURE 4.
11. Group 1-2:
RC - Replace forward center low-pressure oxygen flex hoses in accordance with FIGURE 5.
12. Group 3:
RC - Replace forward center low-pressure oxygen flex hoses in accordance with FIGURE 6 and
FIGURE 7.
13. Group 4:
RC - Replace forward center low-pressure oxygen flex hoses in accordance with FIGURE 8.
14. Group 1-2:
RC - Replace forward right side low-pressure oxygen flex hoses in accordance with FIGURE 9.
15. Group 3:
RC - Replace forward right side low-pressure oxygen flex hoses in accordance with FIGURE 10
and FIGURE 11.
16. Group 4:
RC - Replace forward right side low-pressure oxygen flex hoses in accordance with FIGURE 12.
17. Open oxygen cylinder shutoff valve. Refer to 777 AMM 35-00-00 as an accepted procedure.
18. RC - Do a low pressure leak test. Refer to 777 AMM 35-22-00 as an accepted procedure.
The following requirements must be met:
a. Maintain 90 psi (621 kPa) system pressure for 20 seconds.
b. At 20 psi (138 kPa) to 24 psi (165 kPa) make sure that the pressure drop is no more than 1.0
psi over a 15 minute period at the pressure gauge.
19. Install the removed main ceiling panels. Refer to 777 AMM 25-21-06 as an accepted procedure.
20. Install the removed outboard stowage bin modules. Refer to 777 AMM 25-28-01 as an accepted
procedure.
21. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
33 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 34

WORK PACKAGE 2 - LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT STA 1180 - STA
2070
WARNING: DO NOT PERMIT OIL, GREASE, DIRT OR OTHER FLAMMABLE MATERIALS TO GET
NEAR THE PRESSURE OXYGEN SYSTEM. THESE MATERIALS CAN CAUSE A FIRE
OR AN EXPLOSION WHEN THEY ARE NEAR PRESSURIZED OXYGEN.
WARNING: USE ONLY OXYGEN CLEAN COMPONENTS IN THE OXYGEN SYSTEM. IF YOU DO
NOT USE OXYGEN CLEAN COMPONENTS, A FIRE OR EXPLOSION CAN OCCUR.
THIS CAN CAUSE DAMAGE TO EQUIPMENT OR INJURIES TO PERSONS.
WARNING: USE ONLY LUBRICANT MIL-G-27617 TO LUBRICATE THE O-RINGS. OTHER
LUBRICANTS CAN CAUSE A FIRE TO OCCUR.
CAUTION: LUBRICATE THE O-RINGS WITH LUBRICANT MIL-G-27617 ONLY. IF YOU DO NOT
DO THIS, IT CAN CAUSE DAMAGE TO THE O-RINGS.
CAUTION: SPECIAL CARE MUST BE USED WHEN OXYGEN COMPONENTS ARE HANDLED
AND WORKED WITH. BEFORE WORK IS DONE OF THE OXYGEN SYSTEM, READ
THE SAFETY AND MAINTENANCE PROCEDURES. REFER TO 777 AMM 35-00-00
AND SOPM 20-70-01 AS ACCEPTED PROCEDURES.
CAUTION: OBEY THE PRECAUTIONS IN THE OXYGEN MAINTENANCE PRACTICES
PROCEDURE AMM TASK 777 AMM 35-00-00. A FIRE OR EXPLOSION CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT IF YOU DO NOT OBEY THE
PRECAUTIONS.
CAUTION: MAXIMUM PERMITTED OPEN TIME FOR OXYGEN TUBES, HOSES AND
COMPONENTS IS 5 MINUTES.
CAUTION: DO NOT TIGHTEN THE SHUTOFF VALVE ON THE OXYGEN CYLINDER TO A TORQUE
OF MORE THAN 25 POUND-INCHES. THIS CAN CAUSE DAMAGE TO THE SHUTOFF
VALVE.
CAUTION: DURING REPLACEMENT OF THE LOW-PRESSURE OXYGEN FLEX HOSES, THE
EXISTING CLAMP LOCATIONS MUST BE USED. THE EXISTING ROUTING OF THE
LOW-PRESSURE OXYGEN FLEX HOSES MUST BE MAINTAINED. ROTATE CLAMPS
TO MAKE SURE THE LOW-PRESSURE OXYGEN FLEX HOSES WILL NOT BE IN
CONTACT WITH ADJACENT STRUCTURE WHICH COULD CUT, FRAY, KINK,
FLATTEN, OR PERMANENTLY DEFORM THE LOW-PRESSURE OXYGEN FLEX
HOSES. MINIMUM WIRE SEPARATION DISTANCE TO THE LOW-PRESSURE OXYGEN
FLEX HOSES MUST BE MAINTAINED. REFER TO THE SWPM 20-10-11 FOR WIRE
SEPARATION REQUIREMENTS.
1. Close oxygen cylinder shutoff valve. Refer to 777 AMM 35-00-00 as an accepted procedure.
2. Group 1:
Remove left and right side main ceiling panels to gain access at the approximate location as
identified in the table below. Refer to 777 AMM 25-21-06 as an accepted procedure.
Sta. 1550 - Sta. 1570
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
34 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 35

Sta. 1600 - Sta. 1630
Sta. 1870 - Sta. 1890
Sta. 2040 - Sta. 2070
3. Group 2:
Remove left and right side main ceiling panels to gain access at the approximate location as
identified in the table below. Refer to 777 AMM 25-21-06 as an accepted procedure.
Sta. 1550 - Sta. 1570
Sta. 1600 - Sta. 1630
Sta. 1870 - Sta. 1890
Sta. 2040 - Sta. 2070
4. Group 3:
Remove left and right side main ceiling panels to gain access at the approximate location as
identified in the table below. Refer to 777 AMM 25-21-06 as an accepted procedure.
Sta. 1250 - Sta. 1280
Sta. 1370 - Sta. 1390
Sta. 1420 - Sta. 1434 +5
Sta. 1600 - Sta. 1625
Sta. 1690 - Sta. 1725
Sta. 1860 - Sta. 1895
Sta. 2000 - Sta. 2017
5. Group 4:
Remove left and right side main ceiling panels to gain access at the approximate location as
identified in the table below. Refer to 777 AMM 25-21-06 as an accepted procedure.
Sta. 1250 - Sta. 1280
Sta. 1370 - Sta. 1390
Sta. 1420 - Sta. 1434 +5
Sta. 1600 - Sta. 1625
Sta. 1690 - Sta. 1725
Sta. 1860 - Sta. 1895
Sta. 2000 - Sta. 2017
6. Group 1-2:
RC - Replace aft left side low-pressure oxygen flex hoses in accordance with FIGURE 13.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
35 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 36

7. Group 3-4:
RC - Replace aft left side low-pressure oxygen flex hoses in accordance with FIGURE 14, FIGURE
15, and FIGURE 16.
8. Group 1:
RC - Replace aft center low-pressure oxygen flex hoses in accordance with FIGURE 17.
9. Group 2:
RC - Replace aft center low-pressure oxygen flex hoses in accordance with FIGURE 18.
10. Group 3:
RC - Replace aft center low-pressure oxygen flex hoses in accordance with FIGURE 19 and
FIGURE 20.
11. Group 4:
RC - Replace aft center low-pressure oxygen flex hoses in accordance with FIGURE 20 and
FIGURE 21.
12. Group 1:
RC - Replace aft right side low-pressure oxygen flex hoses in accordance with FIGURE 22.
13. Group 2:
RC - Replace aft right side low-pressure oxygen flex hoses in accordance with FIGURE 23.
14. Group 3-4:
RC - Replace aft right side low-pressure oxygen flex hoses in accordance with FIGURE 24, FIGURE
25, and FIGURE 26.
15. RC - Do a low pressure leak test. Refer to 777 AMM 35-22-00 as an accepted procedure.
The following requirements must be met:
a. Maintain 90 psi (621 kPa) system pressure for 20 seconds.
b. At 20 psi (138 kPa) to 24 psi (165 kPa) make sure that the pressure drop is no more than 1.0
psi over a 15 minute period at the pressure gauge.
16. Install the removed main ceiling panels. Refer to 777 AMM 25-21-06 as an accepted procedure.
17. Install the removed outboard stowage bin modules. Refer to 777 AMM 25-28-01 as an accepted
procedure.
18. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
36 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 37 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
This Figure applies only to: Group 1-2.
STA
972
STA
550
STA
398
00/0000 000000 0
STA
398
LBL
71
2444659
FIGURE 1: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 1 OF 3)
Original Issue: April 08, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-35-0041
Work - See page 1 for details.  37 of 127

### Page 38 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
STA 550
STA 972
LBL
80.9
2444869
FIGURE 1: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 2 OF 3)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  38 of 127

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)2474W2090-( )COUPLER ASSYRemove / Keep1
(a)157034-10A040240HOSE ASSYRemove2
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N040240HOSE ASSYInstall (New)3
(b) (c)2474W2090-30O-RING ASSYInstall (New)
(a)2474W2090-( )COUPLER ASSYInstall (Kept)4
(a)4474W2090-( )COUPLER ASSYRemove / Keep5
(a)257034-10A100180HOSE ASSYRemove6
(a)4474W2090-( )O-RING ASSYRemove
(a)257034-21N100180HOSE ASSYInstall (New)7
(b) (d)4474W2090-31O-RING ASSYInstall (New)
(a)4474W2090-( )COUPLER ASSYInstall (Kept)8
(a) Refer to 777 AMM 35-00-00 as an accepted procedure.
(b) Refer to SOPM 20-70-01 as an accepted procedure.
(c) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(d) M83248/1-017 lubricated with MIL-G-27617 is equivalent to 474W2090-31.
The parts shown in the table below are provided as extra parts for this figure.
More DataQtyIdentificationName
2474W2090-31O-RING ASSY
FIGURE 1: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
39 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 40 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
This Figure applies only to: Group 3-4.
STA
825
STA
246
STA
394.66
IB
2445003
FIGURE 2: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 1 OF 4)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  LOO-SE-LLL
PROPRIETARY - Copyright @ Unpublished
Work - See page 1 for details.  LZ11O O+

### Page 41 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
STA
394.66
9  12
STA
558.99
TAPE
- TAPE
STA
544.45
S-15l
S-16L
_TAPE
S- 17L
2445279
FIGURE 2: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 2 OF 4)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  41 of 127

### Page 42

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)2474W2090-( )COUPLER ASSYRemove / Keep1
(a)157034-10A040130HOSE ASSYRemove2
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N040130HOSE ASSYInstall (New)3
(b) (c)2474W2090-30O-RING ASSYInstall (New)
(a)2474W2090-( )COUPLER ASSYInstall (Kept)4
(a)2474W2090-( )COUPLER ASSYRemove / Keep5
(a)157034-10A120160HOSE ASSYRemove6
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N120160HOSE ASSYInstall (New)7
(b) (d)2474W2090-32O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)2474W2090-( )COUPLER ASSYInstall (Kept)8
(a)1474W2090-( )COUPLER ASSYRemove / Keep9
(a)157034-28A100490HOSE ASSYRemove10
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100490HOSE ASSYInstall (New)11
(b) (d)1474W2090-32O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEInstall (New)
(a)1474W2090-( )COUPLER ASSYInstall (Kept)12
(a) Refer to 777 AMM 35-00-00 as an accepted procedure.
(b) Refer to SOPM 20-70-01 as an accepted procedure.
(c) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(d) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(e) Apply a maximum of two layers of tape with a minimum of 3 inches on each side of clamps, or where the
low-pressure oxygen flex hoses may come in contact with the stowbin cutout or adjacent structure.
(f) It is optional to apply a maximum of two layers of tape on the entire flexible portion of the low-pressure
oxygen flex hoses.
FIGURE 2: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 3 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
42 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 43

More DataQtyIdentificationNameTaskStep
(g) Tape should only be applied to the flexible portion of the low-pressure oxygen flex hoses and not on end
fittings.
The parts shown in the table below are provided as extra parts for this figure.
More DataQtyIdentificationName
1474W2090-32O-RING ASSY
FIGURE 2: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
43 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 44 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
This Figure applies only to: Group 3.
STA
825
STA
825
+210
STA
1035
900m.
y00d00
STA  0000
860.48  STA
872.42
TAPE
TAPE
2450103
FIGURE 3: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 1 OF 4)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright @ Unpublished
Work - See page 1 for details.  44 of 127

### Page 45 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
TAPE
2450323
FIGURE 3: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 2 OF 4)
Original Issue: April 08, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-35-0041
Work - See page 1 for details.  45 of 127

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)2474W2090-( )COUPLER ASSYRemove / Keep1
(a)157034-10A120192HOSE ASSYRemove2
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N120192HOSE ASSYInstall (New)3
(b) (c)2474W2090-32O-RING ASSYInstall (New)
(d) (e) (f)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)2474W2090-( )COUPLER ASSYInstall (Kept)4
(a)1474W2090-( )COUPLER ASSYRemove / Keep5
(a)157034-28A100570HOSE ASSYRemove6
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100570HOSE ASSYInstall (New)7
(b) (c)1474W2090-32O-RING ASSYInstall (New)
(d) (e) (f)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)1474W2090-( )COUPLER ASSYInstall (Kept)8
(a)1474W2090-( )COUPLER ASSYRemove / Keep9
(a)157034-28A100490HOSE ASSYRemove10
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100490HOSE ASSYInstall (New)11
(b) (c)1474W2090-32O-RING ASSYInstall (New)
(d) (e) (f)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)2474W2090-( )COUPLER ASSYInstall (Kept)12
(a) Refer to 777 AMM 35-00-00 as an accepted procedure.
(b) Refer to SOPM 20-70-01 as an accepted procedure.
(c) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(d) Apply a maximum of two layers of tape with a minimum of 3 inches on each side of clamps, or where the
low-pressure oxygen flex hoses may come in contact with the stowbin cutout or adjacent structure.
(e) It is optional to apply a maximum of two layers of tape on the entire flexible portion of the low-pressure
oxygen flex hoses.
FIGURE 3: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 3 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
46 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 47

More DataQtyIdentificationNameTaskStep
(f) Tape should only be applied to the flexible portion of the low-pressure oxygen flex hoses and not on end
fittings.
FIGURE 3: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
47 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 48 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
This Figure applies only to: Group 4.
STA
825
STA
825
+210
STA
1035
00000000
•S-14L
80.36
STA
S-15L
S-16L
• TAPE  *S-17L  2450382
FIGURE 4: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 1 OF 5)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  48 of 127

### Page 49 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
STA
B60.41  STA
872.42
\ LBL
80.36
TAPE
TAPE
2450515
FIGURE 4: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 2 OF 5)
Original Issue: April 08, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-35-0041
Work - See page 1 for details.  49 of 127

### Page 50 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
TAPE
2450512
FIGURE 4: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 3 OF 5)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  50 of 127

### Page 51

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1474W2090-( )COUPLER ASSYRemove / Keep1
(a)157034-11A040590HOSE ASSYRemove2
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-42N040590HOSE ASSYInstall (New)3
(b) (c)1474W2090-30O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)1474W2090-( )COUPLER ASSYInstall (Kept)4
(a)2474W2090-( )COUPLER ASSYRemove / Keep5
(a)157034-10A120192HOSE ASSYRemove6
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N120192HOSE ASSYInstall (New)7
(b) (d)2474W2090-32O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)2474W2090-( )COUPLER ASSYInstall (Kept)8
(a)1474W2090-( )COUPLER ASSYRemove / Keep9
(a)157034-28A100570HOSE ASSYRemove10
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100570HOSE ASSYInstall (New)11
(b) (d)1474W2090-32O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)1474W2090-( )COUPLER ASSYInstall (Kept)12
(a)1474W2090-( )COUPLER ASSYRemove / Keep13
(a)157034-28A100490HOSE ASSYRemove14
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100490HOSE ASSYInstall (New)15
(b) (d)1474W2090-32O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
FIGURE 4: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 4 OF 5)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
51 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 52

More DataQtyIdentificationNameTaskStep
(a)2474W2090-( )COUPLER ASSYInstall (Kept)16
(a) Refer to 777 AMM 35-00-00 as an accepted procedure.
(b) Refer to SOPM 20-70-01 as an accepted procedure.
(c) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(d) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
(e) Apply a maximum of two layers of tape with a minimum of 3 inches on each side of clamps, or where the
low-pressure oxygen flex hoses may come in contact with the stowbin cutout or adjacent structure.
(f) It is optional to apply a maximum of two layers of tape on the entire flexible portion of the low-pressure
oxygen flex hoses.
(g) Tape should only be applied to the flexible portion of the low-pressure oxygen flex hoses and not on end
fittings.
FIGURE 4: FORWARD LEFT SIDE LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
52 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 53 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
This Figure applies only to: Group 1-2.
STA
980.5
STA
570.7
STA
527.6  0 0000000
11000000000 0
STA
527.6
2444876
FIGURE 5: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 1 OF 3)
Original Issue: April 08, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-35-0041
Work - See page 1 for details.  53 of 127

### Page 54 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
STA
980.5
2444942
FIGURE 5: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 2 OF 3)
Original Issue: April 08, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-35-0041
Work - See page 1 for details.  54 of 127

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)2474W2090-( )COUPLER ASSYRemove / Keep1
(a)157034-10A120375HOSE ASSYRemove2
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N120375HOSE ASSYInstall (New)3
(b) (c)2474W2090-32O-RING ASSYInstall (New)
(a)2474W2090-( )COUPLER ASSYInstall (Kept)4
(a)2474W2090-( )COUPLER ASSYRemove / Keep5
(a)157034-10A120180HOSE ASSYRemove6
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N120180HOSE ASSYInstall (New)7
(b) (c)2474W2090-32O-RING ASSYInstall (New)
(a)1474W2090-( )COUPLER ASSYInstall (Kept)8
(a) Refer to 777 AMM 35-00-00 as an accepted procedure.
(b) Refer to SOPM 20-70-01 as an accepted procedure.
(c) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
The parts shown in the table below are provided as extra parts for this figure.
More DataQtyIdentificationName
3474W2090-32O-RING ASSY
FIGURE 5: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
55 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 56 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
This Figure applies only to: Group 3-4.
STA
655
STA
246
STA
329.12
2445306
FIGURE 6: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 1 OF 5)
Original Issue: April 08, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  777-35-0041  56 of 127

### Page 57 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
LBL
50.04
STA
558.93
TAPE
5 8
LBL
47.97  STA
542.43
2450067
FIGURE 6: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 2 OF 5)
Original Issue: April 08, 2016
PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-35-0041
Work - See page 1 for details.  57 of 127

### Page 58 (OCR)

BOEING SERVICE BULLETIN 777-35-0041
OU
2450068
FIGURE 6: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 3 OF 5)
Original Issue: April 08, 2016
Export Controlled ECCN: 9E991 - BOEING  777-35-0041
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  58 of 127

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)2474W2090-( )COUPLER ASSYRemove / Keep1
(a)157034-10A040130HOSE ASSYRemove2
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N040130HOSE ASSYInstall (New)3
(b) (c)2474W2090-30O-RING ASSYInstall (New)
(a)2474W2090-( )COUPLER ASSYInstall (Kept)4
(a)2474W2090-( )COUPLER ASSYRemove / Keep5
(a)157034-10A120180HOSE ASSYRemove6
(a)2474W2090-( )O-RING ASSYRemove
(a)157034-21N120180HOSE ASSYInstall (New)7
(b) (d)2474W2090-32O-RING ASSYInstall (New)
(e) (f) (g)-BMS 5-179, TYPE I,
CLASS I, GRADE A
TAPEApply
(a)2474W2090-( )COUPLER ASSYInstall (Kept)8
(a)1474W2090-( )COUPLER ASSYRemove / Keep9
(a)157034-28A100260HOSE ASSYRemove10
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100260HOSE ASSYInstall (New)11
(b) (d)1474W2090-32O-RING ASSYInstall (New)
(a)1474W2090-( )COUPLER ASSYInstall (Kept)12
(a)1474W2090-( )COUPLER ASSYRemove / Keep13
(a)157034-28A100275HOSE ASSYRemove14
(a)1474W2090-( )O-RING ASSYRemove
(a)157034-41N100275HOSE ASSYInstall (New)15
(b) (d)1474W2090-32O-RING ASSYInstall (New)
(a)1474W2090-( )COUPLER ASSYInstall (Kept)16
(a) Refer to 777 AMM 35-00-00 as an accepted procedure.
(b) Refer to SOPM 20-70-01 as an accepted procedure.
(c) M83248/1-012 lubricated with MIL-G-27617 is equivalent to 474W2090-30.
(d) M83248/1-117 lubricated with MIL-G-27617 is equivalent to 474W2090-32.
FIGURE 6: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 4 OF 5)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
59 of 127
BOEING SERVICE BULLETIN 777-35-0041

### Page 60

More DataQtyIdentificationNameTaskStep
(e) Apply a maximum of two layers of tape with a minimum of 3 inches on each side of clamps, or where the
low-pressure oxygen flex hoses may come in contact with the stowbin cutout or adjacent structure.
(f) It is optional to apply a maximum of two layers of tape on the entire flexible portion of the low-pressure
oxygen flex hoses.
(g) Tape should only be applied to the flexible portion of the low-pressure oxygen flex hoses and not on end
fittings.
The parts shown in the table below are provided as extra parts for this figure.
More DataQtyIdentificationName
3474W2090-32O-RING ASSY
FIGURE 6: FORWARD CENTER LOW-PRESSURE OXYGEN FLEX HOSES REPLACEMENT
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 08, 2016
777-35-0041
60 of 127
BOEING SERVICE BULLETIN 777-35-0041

The text continues at https://openairdocs.org/service-documents/boeing/sb-777-35-0041/file/ce0748c60d8a.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
