# MHI RJ Service Bulletin 670BA-57-029

Copy: No revision named ("SB 670BA-57-029"), 12 pages: PDF https://openairdocs.org/files/sha256/04/00/040085608eabad61be5e9ed0c9ead4b941153c1c05ec42dbfa0534eb4fe42dd0; text https://openairdocs.org/service-documents/bombardier/670ba-57-029/file/040085608eab.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-0592; AD 2022-18-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md) (issued as MHI RJ)
- Type: Service bulletin (Service Bulletin)
- Number: 670BA-57-029
- Page: https://openairdocs.org/service-documents/bombardier/670ba-57-029

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-18-17](https://openairdocs.org/ad/2022-18-17.md), effective Oct 11, 2022: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/670ba-57-029/proposed.md).

## Text (12 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-0592; AD 2022-18-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SB 670BA−57−029
Page 1 of 11
Feb 02/2021
SERVICE BULLETIN
Technical
Publications
THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED AIRCRAFT ,
TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND THIS SERVICE BULLETIN TO THE NEW
OWNER, UNLESS CONFIRMATION WAS RECEIVED THAT MHIRJ HAS INCLUDED THE NEW
OPERATOR ON THE DISTRIBUTION LIST .
SEND THIS SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR HAS SOLD AIRCRAFT OR
ATA SYSTEM: 57−00 NUMBER: 670BA−57−029
SUBJECT:  Wings − General − Inspection of the Wing Lower Skin in the Flaps Fitting
Area
1. PLANNING INFORMATION
A. Effectivity
(1) Aircraft Affected:
AIRCRAFT
MODEL
SERVICE AIRCRAFT
SERIAL NUMBERS
PRODUCTION
AIRCRAFT
SERIAL NUMBERS
CL−600−2D24 15462 thru 15475. [1]
[1] There is no production effectivity.
NOTE: The instructions in this service bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by MHIRJ service bulletins. Before you do this service
bulletin, examine all Supplemental Type Certificates (STCs) and
Supplemental Type Approvals (STAs) or equivalent action changes
to make sure you can complete this service bulletin.

### Page 2

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 2 of 11
Feb 02/2021
B. Reason
(1) Condition
Some aft wing lower planks were damaged during the production of the
aircraft.
(2) Evidence
As a result of a production manufacture process error, there may be some
dents on wing lower planks.
(3) Objective/Benefit
This service bulletin gives the procedure to do a one time inspection of the
five flap arm areas on the left and right side wing stations (WS) 54, 129, 179,
220 and 264 for dents, cracks, discoloration and/or other surface damage.
Report all results to MHIRJ, and get an approved disposition if damage was
found.
C. Description
The LHS and the RHS wing flap attachment fairings are removed. The area is
cleaned and the inspection is done. A result report is sent to MHIRJ. The LHS and
the RHS wing flap attachment fairings are installed.
D. Compliance
Recommended service bulletin.
MHIRJ recommends that this service bulletin be done at no more than 8800 flight
hours from the release date of this service bulletin or, before 16,800 flight hours
since Entry Into Service (EIS) of the aircraft, unless otherwise directed by the
airworthiness authority of the operator.
NOTE: If it is not possible to complete all the instructions in this service bulletin
because of the configuration of the aircraft, speak with a representative
of MHIRJ in the CRC at 1−844−272−2720 (1−844−CRC−CRC0) or
e-mail at thd.crj@MHIRJ.com for analysis and to get an approved
disposition to complete this service bulletin.
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
Tolerance Inspections (DTIs).
E. Approval
The technical content of this service bulletin has been approved under the authority
of the TCCA Design Approval Organization No: DAO #20−Q−01.

### Page 3

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 3 of 11
Feb 02/2021
F . Manpower
The man-hours given below are estimates for direct labor done by an experienced
crew on an aircraft prepared for maintenance.
These estimates do not include the time necessary for:
−Administrative functions such as planning, liaising, familiarization, and report writing.
−Non-productive elapsed time such as rest time, having meals, and crew shift
changes.
−Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.
−Preparation for modification (unless specified in the Accomplishment
Instructions) such as cleaning and getting parts, tools, consumables, and
ground equipment.
−Quality assurance inspections, troubleshooting and/or correction of
discrepancies found when a task is done.
−All other activities that are not considered by MHIRJ as directly related to the
accomplishment of this procedure.
NOTE: For on-site labor assistance, please speak with a Fleet Services
representative for an estimate. Call the Fleet Services Team through the
CRC at 1−844−272−2720 (1−844−CRC−CRC0) or e-mail at
thd.crj@MHIRJ.com.
It will take an estimated 4.5 man-hours to complete this service bulletin. The
man-hours are divided in the table that follows (elapsed cure time is not included in
the man-hour summary given above):
TASK MAN-HOURS
(1)  Job Set-Up 1.00
(2)  Procedure 2.00
(3)  Test N/A
(4)  Job Close-Out 1.50

### Page 4

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 4 of 11
Feb 02/2021
G. Material − Price and Availability
There are no kits for this service bulletin.
(1) Refer to paragraph 3.B. for a list of consumables for this service bulletin.
H. Tooling − Price and Availability
There are no tool kits for this service bulletin. Refer to paragraph 3.C. for a list of
special tools and equipment for this service bulletin.
I. Weight and Balance
Not changed.
J. Electrical Load Data
Not changed.
K. References
Refer to the SB Introduction document for definition or explanation of service
bulletin content.
For MHIRJ reference only: Restriction and/or Special Instruction (RSI)
C−57−1920−00, Revision A.
For MHIRJ reference only: PCA 77504.
L. Other Publications Affected
Aircraft Maintenance Manual (AMM)
Aircraft Illustrated Parts Catalogue (AIPC)
M. Relationship Chart
Not applicable.

### Page 5

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 5 of 11
Feb 02/2021
2. ACCOMPLISHMENT INSTRUCTIONS
Reference Information
REFERENCE DESIGNATION
AMM 12−00−00−867−801 Standard Aircraft Configuration for Maintenance
AMM 57−51−84−000−801 Removal of the Flap Fairing at WS 54.55
AMM 57−51−84−400−801 Installation of the Flap Fairing at WS 54.55
AMM 57−51−84−000−802 Removal of the Flap Fairing at WS 128.00
AMM 57−51−84−400−802 Installation of the Flap Fairing at WS 128.00
AMM 57−51−84−000−803 Removal of the Flap Fairing at WS 178.00
AMM 57−51−84−400−803 Installation of the Flap Fairing at WS 178.00
AMM 57−51−84−000−804 Removal of the Flap Fairing at WS 220.00
AMM 57−51−84−400−804 Installation of the Flap Fairing at WS 220.00
AMM 57−51−84−000−805 Removal of the Flap Fairing at WS 264.00
AMM 57−51−84−400−805 Installation of the Flap Fairing at WS 264.00
SRM 51−13−01−001−001 Defect and Damage Repair Requests − Report
Procedure
SRM 51−26−00−001−001 Cleaning

### Page 6

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 6 of 11
Feb 02/2021
A. Job Set-Up
NOTE: The steps in the Job Set-Up section of this service bulletin are
recommended steps. The steps give a recommendation to get access
to the work area. This recommendation is to give a safe work area and
to minimize possible damage to surrounding aircraft parts. Alternative
steps can be used at the operator discretion.
(1) Make sure that the aircraft is in standard configuration for maintenance
(refer to AMM 12−00−00−867−801).
WARNING: OBEY ALL THE SAFETY PRECAUTIONS WHEN YOU DO
MAINTENANCE ON OR NEAR ELECTRICAL/ELECTRONIC
EQUIPMENT. IF YOU DO NOT OBEY THE SAFETY PRECAUTIONS,
INJURIES TO PERSONS AND/OR DAMAGE TO THE EQUIPMENT CAN
OCCUR.
Refer to Figure 1.
NOTE: This procedure is applicable to the left and the right sides. The procedure
that follows is written for the left side. The differences are given.
(2) Remove the forward flap fairing (1) and the aft flap fairing (2) at FS 54.55 (refer
to AMM 57−51−84−000−801).
(3) Remove the forward flap fairing (1) and the aft flap fairing (2) at FS 128.00
(refer to AMM 57−51−84−000−802).
(4) Remove the forward flap fairing (1) and the aft flap fairing (2) at FS 178.00
(refer to AMM 57−51−84−000−803).
(5) Remove the forward flap fairing (1) and the aft flap fairing (2) at FS 220.00
(refer to AMM 57−51−84−000−804).
(6) Remove the forward flap fairing (1) and the aft flap fairing (2) at FS 264.00
(refer to AMM 57−51−84−000−805).

### Page 7

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 7 of 11
Feb 02/2021
B. Procedure
NOTE: This procedure is applicable to the left and the right sides. The procedure
that follows is written for the left side. The differences are given.
(1) If it is not possible to complete all the instructions in this service bulletin
because of the configuration of the aircraft, speak with a representative of
MHIRJ in the CRC at 1−844−272−2720 (1−844−CRC−CRC0) or e-mail at
thd.crj@MHIRJ.com for analysis and to get an approved disposition to
complete this service bulletin.
Refer to Figures 1 and 2.
(2) Do a Detailed Visual Inspection (DVI) of the outer aft lower skin wing stations
(WS) 54.55, 128.00, 179.00, 220.00 and 264.00 as follows:
(a) Inspect the area for signs of discoloration.
NOTE: Cracks in the wing skin could cause a minor fuel leak which may
result in a local discoloration of the wing surface.
(b) Clean an area of 18 in. (46 cm) around each of the forward flap fittings
(3) and aft flap fittings (4) locations (SRM 51−26−00−001−001).
(c) Use a bright flashlight and a 12 in. (30 cm) straight edge to inspect that
area as follows:
1 Place the straight edge on the skin surface in an upright position.
2 Use the bright light to visually inspect the area for dents, cracks,
gouges, scratches and/or other surface damage.
(d) After the inspection, make a defect and damage report of all findings
and e−mail it to MHIRJ at thd.crj@MHIRJ.com (refer to SRM
51−13−01−001−001).
NOTE: The defect and damage report must be sent to MHIRJ if dents,
cracks, discoloration, and/or other surface damage was found or
not.
1 If no damage is found, then no further action is required and the
aircraft can be returned to service.
2 If damage is found, get an approved disposition from MHIRJ
before the aircraft can be returned to service.

### Page 8

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 8 of 11
Feb 02/2021
C. Job Close-Out
NOTE: The steps in the Job Close-Out section of this service bulletin, except for
the return-to-service tests, are recommended steps. The steps give a
recommendation to install components removed during the Job Set-Up.
This recommendation is to make sure that the aircraft is safe and ready
to return to service. Alternative steps can be used at the operator
discretion.
(1) Remove all tools, equipment, and unwanted materials from the work area.
Refer to Figure 1.
NOTE: This procedure is applicable to the left and the right sides. The procedure
that follows is written for the left side. The differences are given.
(2) Install the forward flap fairing (1) and the aft flap fairing (2) at FS 54.55 (refer
to AMM 57−51−84−400−801).
(3) Install the forward flap fairing (1) and the aft flap fairing (2) at FS 128.00 (refer
to AMM 57−51−84−400−802).
(4) Install the forward flap fairing (1) and the aft flap fairing (2) at FS 178.00 (refer
to AMM 57−51−84−400−803).
(5) Install the forward flap fairing (1) and the aft flap fairing (2) at FS 220.00 (refer
to AMM 57−51−84−400−804).
(6) Install the forward flap fairing (1) and the aft flap fairing (2) at FS 264.00 (refer
to AMM 57−51−84−400−805).
(7) When this service bulletin is completed, make this entry in the applicable
logbooks: /quoteblleftService Bulletin 670BA−57−029, Inspection of the Wing Box
Structure on the AFT Lower Wing Plank, incorporated."

### Page 9

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 9 of 11
Feb 02/2021
Removal and Installation of the Forward and AFT Flap Fitting Fairings
Figure 1 
WS54.55
WS128.00
WS178.00
WS220.00
WS264.00
A
2
1
TYPICAL
A
bc11023a02.cgm, gd, gb, jan07/2021
LEGEND
1. Forward fairing.
2. Aft fairing.
3. Flap − Wing Forward Fitting.
4. Flap − Wing Aft Fitting.
3
4

### Page 10

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 10 of 11
Feb 02/2021
Outer Aft lower skin Inspection Area
Figure 2
bc11023a01.cgm, gd, dec08/2020
WS54.55
WS128.00
WS178.00 WS220.00 WS264.00
1
NOTE
Inspect area 18 in. (46 cm) around the forward and
aft flap fitting (shown in gray shade).
1

### Page 11

SERVICE BULLETIN  670BA−57−029
SB 670BA−57−029
Page 11 of 11
Feb 02/2021
3. MATERIAL INFORMATION
A. Kit Information
None.
B. Consumable Information
For a list of consumables, refer to the different tasks that are given as references in
this service bulletin.
C. Special Tools and Equipment
There are no special tools and equipment for this service bulletin.
D. Disposition of Parts
Not applicable.
1

### Page 12

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
