# Bombardier All Operator Message 236A: No revision named

- Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2011-0151; AD 2011-17-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Bombardier All Operator Message 236A](https://openairdocs.org/service-documents/bombardier/aot-236a.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
2011-0151 - AOM 236A
- Pages: 3
- PDF: https://openairdocs.org/files/sha256/1c/d3/1cd341b86b78e0136a068cad01ed74971bc0ee7be645559ecf11f5efbc5b6e04
- Page: https://openairdocs.org/service-documents/bombardier/aot-236a/file/1cd341b86b78

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

BOMBARDIER  AEROSPACE  Bombardier Inc.
123 Garratt Blvd
Tow aero Bombarder CoS
TEL: +1-416-375-4000
Bombardier Q400
All Operator Message No. 236A
ATTN:  Director/Manager of:  Maintenance
Engineering
Quality Control
Flight Operations
Procurement/Spares
DATE: 11 September 2007
ATA:  3210  MODEL: Q400
SUBJECT:  Update - In-service Incident - Right Main Landing Gear Collapse After Landing
REFERENCE: /A/ AOM 235, In-service Incident - Right Main Landing Gear Collapse After
Landing
The following message is being sent to all Bombardier Q400 Operators and Bombardier
Aerospace Field Service Representatives.
This message contains information requiring attention and/or action. Please ensure timely and
appropriate distribution within maintenance and flight operations departments.
DISCUSSION:
This AOM is being re-issued to clarify compliance time and actions requested.
All Operator Message 235 was previously issued to advise Operators of an incident in which the
right hand main landing gear collapsed following landing. A Bombardier / Goodrich team has
been dispatched to the site to support the ongoing investigation, along with the Transportation
Safety Board of Canada.
Although there have been no findings to-date, we have conducted a preliminary engineering
review of the limited information available at this time. Based on this review, Operators may
wish to consider performing the following interim actions on a one time basis:
Safety Reminder: Insert the MLG Lock Pin and ensure it fits freely (Refer to Ramp Service
Manual Chapter 2 page 45) prior to doing any work in the landing gear
area including the recommended tasks below.
D-7534-8-400-AOM-236A  Page 1 of 3
(BW/ME)
TS001 MW2000 2004-002

### Page 2 (OCR)

Within the next 100 flight hours it is recommended to complete the following tasks on a one time
basis:
• Clean and perform a General Visual Inspection (GVI) of the MLG stabilizer stay hinge
points for general condition and security
Clean and inspect (GVI) the MLG stabilizer stay - brace for general condition and
security
At the next 'A'-Check it is recommended to pay special attention to the following task:
• Lubricate all MLG Stabilizer Stay hinge points and ensure joints freely accept grease
(Refer to AMM TASK 12-20-01-640-803) as per the 'A' check. Special attention should
be directed to the joints marked on the illustration below, on both sides of the stay brace.
Operators will be advised as the investigation progresses and further information becomes
available.
Figure 1: Inspection Areas
Inspect Indicated Areas
D-7534-8-400-AOM-236A  Page 2 of 3
(BW/ME)
TS001 MW2000 2004-002

### Page 3 (OCR)

Figure 2: Inspection Area Pictures
Forward
Please direct responses and inquiries to the Technical Help Desk in Toronto at telephone
(416) 375-4000 or facsimile (416) 375-4539 or e-mail: thd.qseries@aero.bombardier.com.
Barry Wilkins, Principal Engineer, In-Service Engineering & Technical Support, and Martin
Elliott, Director, In-Service Engineering & Technical Support, Bombardier Aerospace.
D-7534-8-400-AOM-236A  Page 3 of 3
(BW/ME)
TS001 MW2000 2004-002

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
