# Bombardier Service Bulletin 100-26-01

Copy: Revision 01 ("100_26_01_Rev01"), 11 pages: PDF https://openairdocs.org/files/sha256/d5/02/d5028caaa06f921d6762075f8eb4b11682069bd11879909d9b91f148b2137662; text https://openairdocs.org/service-documents/bombardier/sb-100-26-01/file/d5028caaa06f.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0859; AD 2021-03-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-26-01
- Latest revision known: 100-26-01, Revision 01, dated December 5, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-26-01

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-03-10](https://openairdocs.org/ad/2021-03-10.md), effective Mar 31, 2021: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-100-26-01/proposed.md).

## Text (11 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0859; AD 2021-03-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Basic issue of this Service Bulletin dated Dec 20/2016 and replace in its
entirety with this Revision 01.
Service Bulletin No. 100−26−01
Date of Basic Issue Dec 20/2016
Revision No. 01 Dated Dec 05/2019
This revision has no effect for aircraft on which the Basic Issue of this Service
Bulletin was done thus no other action is necessary. Do not sign the log book if you
have not done this revision. Keep the previous log book entry. You may make an
entry as "Not Applicable" for this revision.
This revision is issued to:
1. Revise the Service Bulletin to reflect the latest template.
2. Change, in the Service Bulletin Summary Sheet, to revise compliance time to 24 months.
3. Change, in Paragraph 1.D., to revise compliance time to 24 months.
4. Change, in Paragraph 1.F., and 1.G., to revise time to 24 months.
5. Add, in Paragraph 1.K., a TCCA Airworthiness Directive (Pending) reference.
6. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL BD−100−1A10 (CH−300)
100−26−01
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

MODIFICATION – FIRE PROTECTION – REPLACEMENT OF THE FIRE DETECTION
AND EXTINGUISHING (FIREX) CONTROL UNIT
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 24 months from Service
Bulletin Release Date (Revision
01)
EFFECTIVITY: A/C Serial No. 20003 to 20500
MANPOWER: 1 man−hour
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN YES NO
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make
it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 26−11
FIRE PROTECTION
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 1 of 1
This Service Bulletin is available at:

### Page 3

MODIFICATION – FIRE PROTECTION – REPLACEMENT OF THE FIRE DETECTION
AND EXTINGUISHING (FIREX) CONTROL UNIT
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. Please contact your
Regional Manager (RM), Field Service Representative (FSR) or Customer
Service Representative (CSR) to schedule your aircraft as there is a
limited availability. The parts will be allocated on a first come first served
basis.
For more information on dedicated schedules, refer to SB 100−00−02.
A. Effectivity
BD−100−1A10 aircraft, Serial No. 20003 to 20500.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 26−11
FIRE PROTECTION
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2016−2019 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 1 of 7
This Service Bulletin is available at:

### Page 4

B. Reason
Operators have reported the loss of FIREX Control Unit, Part No. 474112−2,
FPGA−B functionality annunciated by "GEAR BAY DET FAIL" (caution) and "FIRE
SYS FAULT" (advisory) messages. The investigation determined that the potential
cause of these messages is the 404451 FIREX FPGA Rev. B’s susceptibility to
internal noise.
This Service Bulletin gives instructions to remove the FIREX Control Unit, Part No.
474112−2, and replace it with a FIREX Control Unit, Part No. 474112−3. The
benefits to the operator are improved reliability and reduced maintenance costs.
C. Description
This Service Bulletin gives instructions to:
− Open the aft equipment−compartment door 182GL,
− Get access to the FIREX Control−Unit,
− Remove the FIREX Control−Unit Part No. 474112−2,
− Return it to Bombardier for exchange,
− Install a FIREX Control−Unit, Part No. 474112−3, and
− Do the necessary tests to make sure that the FIREX system operates correctly.
D. Compliance
Recommended within 24 months from this Service Bulletin release date
(Revision 01).
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the aircraft configuration, submit an SRPSA for analysis and to
get an approved disposition to complete this Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 2 of 7

### Page 5

F. Manpower
NOTE: The man−hours given are to help you schedule the tasks given in this
bulletin. The man−hours are for direct labor performed by an experienced
crew and do not include the time for familiarization, planning, aircraft
preparation in hangar such as towing and positioning of scaffolds, removal
of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower, refer to SB 100−00−02.
1 man−hour is necessary to do this modification.
The labor required to do this Service Bulletin is at no cost if:
− the work is done during new aircraft warranty period, and
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− this Service Bulletin is done in less than 24 months from its release date
(Revision 01).
G. Material − Cost and Availability
No kit is necessary to do this modification. For material data, refer to Paragraph 3.
NOTE: This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. Please contact your
Regional Manager (RM), Field Service Representative (FSR) or Customer
Service Representative (CSR) to schedule your aircraft as there is a
limited availability. The parts will be allocated on a first come first serve
basis.
For more information on dedicated schedules, refer to SB 100−00−02.
One Fire−Detection−and−Extinguishing (FIREX) Control−Unit, Part No. 474112−3,
is necessary to do this modification and is available at no cost if a no−charge
purchase order is sent to Bombardier Aerospace in less than 24 months from this
Service Bulletin release date (Revision 01).
Send the old FIREX Control Unit, Part No. 474112−2, for upgrade to Bombardier
Aerospace at one of the two addresses given below:
Learjet Inc.
Core Returns
251 − A, Wille Road
Des Plaines, Illinois
60018−1861
USA
MODEL BD−100−1A10 (CH−300)
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 3 of 7

### Page 6

or
Distribution Centre Frankfurt − Core Returns
Bombardier Aerospace Germany Gmb H
Hans−Boeckler−Strasse 9
GROSS−GERAU Hesse 64521
Germany
Refer to your Material Return Authorization (MRA) form to find the applicable return
address.
NOTE: Bombardier Aerospace is maintaining a rotable pool of replacement
FIREX Control Unit, to be supplied to the operators under the terms and
conditions given below:
− The removed FIREX Control Unit, Part No. 474112−2, must be
returned to Bombardier Aerospace, Parts Services in less than 10 days
of receipt of replacement unit, with documentation showing the serial
number of the aircraft.
− If the removed FIREX Control Unit, Part No. 474112−2, is not returned
in less than 10 days, the operator will be charged for the replacement
unit.
For all parts transactions, Bombardier Aerospace’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply. These
terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com
During or after the above free period, Smart Parts Plus does not pay for the parts.
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
24−00−24 S4933959−501 Tag, Circuit Breaker
NOTES: 1. Refer to the BD−100 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for the BD−100 for
acceptable GSE equivalents.
I. Weight and Balance
No change.
J. Electrical Load Data
No change.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 4 of 7

### Page 7

K. References
− TCCA Airworthiness Directive, (Pending).
− Bombardier Aerospace, Modification Summary, 100T010851, Rev. A−1.
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI),
C−100−000−26−0034, Rev.−− 1.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
− Bombardier Aerospace, SB 100−00−02, Service Bulletin Description and Policy.
− CH 300 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 26 and 52.
L. Other Publications Affected
− CH 300 Aircraft Illustrated Parts Catalog (AIPC).
M. Equivalent Service Bulletin
− For the Challenger 350 aircraft, use Service Bulletin 350−26−001.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the BD−100,
Aircraft Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
BD−100, Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
NOTE: The steps in the aircraft setup section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator’s discretion.
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all the electrostatic−discharge safety precautions. Refer to
AMM 24−00−00−910−802.
(3) Open the aft equipment−compartment door 182GL. Refer to
AMM 52−41−00−010−801.
B. Modification
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
(1) Remove the FIREX Control−Unit, Part No. 474112−2. Refer to
AMM 26−11−01−000−801.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 5 of 7

### Page 8

(2) Return the FIREX Control−Unit, Part No. 474112−2 for upgrade. Refer to
Paragraph 1.G.
(3) Install an upgraded FIREX Control−Unit, Part No. 474112−3. Refer to
AMM 26−11−01−400−801.
C. Close−out
NOTE: The steps in the Close−out section of this Service Bulletin, except for the
return−to−service tests, are recommended steps. The Steps give a
recommendation to install components removed during the Aircraft Setup.
This recommendation is to make sure that the aircraft is safe and ready to
return to service. Alternative steps can be used at the operator’s
discretion.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Close the aft equipment−compartment door 182GL. Refer to
AMM 52−41−00−410−801.
D. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
For information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin
Group at the following email address:
bbad_SBgroup@aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
No kits required.
B. Parts
The part that follows is necessary to do this Service Bulletin and is available from
Bombardier Aerospace Parts Services, Montreal:
MODEL BD−100−1A10 (CH−300)
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 6 of 7

### Page 9

NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
474112−3 1 FIREXControl Unit 474112−2
Return for
upgrade.
Refer to
Paragraph 1.G.
NOTE: The part number for the item listed above is subject to change without
revision to this Service Bulletin. In case of discrepancy between this list
and any other list, the Illustrated Parts Catalog prevails and shall be used
to determine the latest part number.
C. Material
No materials required.
D. Publications
No publications required.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Dec 20/2016
Revision 01: Dec 05/2019
100−26−01
Page 7 of 7

### Page 10

100−26−01 Rev. 01 Dec 05/2019
MODIFICATION – FIRE PROTECTION – REPLACEMENT OF THE FIRE
DETECTION AND EXTINGUISHING (FIREX) CONTROL UNIT
bbad_SBgroup@aero.bombardier.com
NOTE: Please use Salesforce only for troubleshooting issues or when Engineering
deviation is necessary to accomplish the Service Bulletin modification.
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:
For any information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin Group
at the following email address:

### Page 11

SERVICE BULLETIN INCORPORATION SHEET − "100−26−01"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
100−26−01 01
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
