# Bombardier Service Bulletin 100-27-21

Copy: No revision named ("100-27-21 Basic"), 12 pages: PDF https://openairdocs.org/files/sha256/09/af/09af88e4058879dc827197ad4a92bae0cf79699217ac90aeac65ee412331fbf6; text https://openairdocs.org/service-documents/bombardier/sb-100-27-21/file/09af88e40588.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-1251; AD 2023-02-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-27-21
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-27-21

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-02-01](https://openairdocs.org/ad/2023-02-01.md), effective Mar 14, 2023: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-100-27-21/proposed.md), [1 difficulty report](https://openairdocs.org/service-documents/bombardier/sb-100-27-21/reports.md).

## Text (12 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-1251; AD 2023-02-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SPECIAL CHECK/MODIFICATION – PITCH TRIM SYSTEM – REPLACEMENT OF
PITCH TRIM SWITCHES ON PILOT AND CO-PILOT CONTROL WHEELS
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Refer to Paragraph 1.D.
EFFECTIVITY: 20003 to 20500
MANPOWER: Refer to Paragraph 1.F.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN YES NO
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make
it necessary to implement this Service Bulletin.
To place an order for parts, please call Bombardier Aviation Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 27−41
FLIGHT CONTROLS
Basic Issue: Mar 21/2022 100−27−21
Page 1 of 1
This Service Bulletin is available at:

### Page 2

SPECIAL CHECK/MODIFICATION – PITCH TRIM SYSTEM – REPLACEMENT OF
PITCH TRIM SWITCHES ON PILOT AND CO-PILOT CONTROL WHEELS
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent  action changes to make sure that this Service Bulletin
can be completed.
2. This Service Bulletin is not applicable to the aircraft if maintenance
documentation confirms that no pilot or co−pilot trim switch or control
wheels has been replaced post Jan 01/2019.
3. This Service Bulletin is not applicable to the aircraft if maintenance
documentation confirms that pilot or co−pilot trim switch or control wheels
replaced post Jan 01/2019, have a trim switch serial number 02000 and
subs.
4. Affected trim switches, and control wheels fitted with impacted trim
switches, as defined in this Service Bulletin, shall not be installed on the
BD−100−1A10 aircraft as of the release of the Service Bulletin.
5. This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. They can be reached at
bacs_isit@aero.bombardier.com.
Should you require additional information, please contact your Regional
Sales Manager (RM) or Field Service Representative (FSR).
For more information on dedicated schedules, refer to SB 100−00−002.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 27−41
FLIGHT CONTROLS
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2022 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Mar 21/2022 100−27−21
Page 1 of 9
This Service Bulletin is available at:

### Page 3

6. This Service Bulletin is also applicable for the parts that follow, in the
operator’s stock room:
PART NO. ITEM
83912070
(BA Part No. 1002710011−001) Pilot control wheel
83912071
(BA Part No. 1002710011−002) Co−pilot control wheel
83452541
(With Serial Nos. listed in Table 1) Trim switch
A. Effectivity
BD−100−1A10 aircraft, Serial No. 20003 to 20500.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aviation Service Bulletin(s).
TABLE 1 – SERIAL NUMBERS OF AFFECTED PITCH TRIM SWITCH
PART NO. SERIAL NO.
83452541
01583 to 01604
01610 to 01622
01628 to 01635
B. Reason
1. Condition:
There have been an increase in trim switch failure rates due to failure of springs
manufactured post 2019. Switch, Part No. 83452541, is affected with post 2019
springs which if failed, may result in the aircraft pitching Nose Down (ND) when
actually commanded Nose Up (NU).
2. Objective/Benefit:
This Service Bulletin introduces an inspection of the serial numbers of pitch trim
switches and to replace the affected switches with a new one in the pilot and
co−pilot control wheel. The new redesigned trim switches reduces the risk of
unintended stabilizer motion.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 2 of 9

### Page 4

C. Description
This Service Bulletin gives instructions to:
− Examine the serial number of existing pitch trim switches per Paragraph 1.A.,
TABLE 1,
− If the serial number of pitch trim switch is not in the affected list from Table 1, go
to Paragraph 2.D., Close−out,
− If the serial number of pitch trim switch is in the affected list from Table 1,
discard the switch and replace it with a new trim switch, Part No. 83452541, with
serial numbers 02000 and subs, per Paragraph 2.B.,
− Do the necessary test to make sure that the system operates correctly, and
− Discard the trim switches in the stock purge, having serial numbers listed in
Paragraph 1.A., TABLE 1.
D. Compliance
Specified Time Compliance.
Recommended in less than 200 flight hours or before Oct 30/2022, whichever
comes first from this Service Bulletin release date (Basic Issue).
NOTES: 1. This Service Bulletin is in reference to Advisory Wire
AW300−27−0388.
2. If it is not possible to complete all the instructions in this Service
Bulletin because of the aircraft configuration, submit an SRPSA for
analysis and to get an approved disposition to complete this Service
Bulletin.
Standard SRPSA fees may apply. Refer to the Services section of the
Bombardier customer portal for the latest prices, rates and fees.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTE: The man−hours given are to help you schedule the tasks given in this
Service Bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization, planning,
aircraft preparation in hangar such as towing and positioning of scaffolds,
removal of interior furnishings, repainting, supervision and inspection.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 3 of 9

### Page 5

For more information related to the manpower, refer to SB 100−00−02.
1 man−hour is necessary to do the special check.
3 man−hours are necessary to replace one trim switch, for this modification.
4 man−hours are necessary to replace two trim switches, for this modification.
Bombardier Aviation does not pay for the labor required to incorporate this Service
Bulletin, at any time.
G. Material − Cost and Availability
No kit is necessary to do this modification.
The part listed in Paragraph 3.B. may be necessary to do this modification.
The parts can be purchased by sending a purchase order to Bombardier Aviation
Parts Services, Montreal.
This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are
used to reserve and manage inventory due to limited availability of rotable stock,
parts and/or kits. Parts are limited, therefore, advance part scheduling with our
In−Service Implementation Team (ISIT) is recommended prior to a maintenance
visit. They can be reached at bacs_isit@aero.bombardier.com.
Should you require additional information, please contact your Regional Sales
Manager (RM) or Field Service Representative (FSR).
For more information on dedicated schedules, refer to SB 100−00−002.
For all parts transactions, Bombardier Aviation’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply. These
terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com
Bombardier Aviation does not pay for the parts required for this Service Bulletin, at
any time.
For those aircraft with Smart Parts coverage, these programs will pay for the
required parts up to October 30/2022.
H. Tooling
The equipment listed below is necessary to do this modification.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 4 of 9

### Page 6

GSE REFERENCE NO. PART NO. DESCRIPTION
24−00−24 S4933959−501 Circuit Breaker Tag
NOTES: 1. Refer to the BD−100 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for the, BD−100 for
acceptable GSE equivalents.
3. This list is provided for quick reference.  In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail.  Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
No change.
J. Electrical Load Data
No change.
K. References
− TCCA Airworthiness Directive, (pending).
− Bombardier Aviation, Restriction and/or Special Instruction (RSI),
C−100−000−27−0321, Rev. A.
− Bombardier Aviation, Modification Summary, 100T010336 Rev A2.
− Bombardier Aviation, Modification Summary, 100T010964 Rev C4.
− Advisory Wire AW300−27−0388.
− CH 300 Aircraft Maintenance Manual (AMM), Chapters 6, 20, 24 and 27.
− CH 300 Aircraft Illustrated Parts Catalog (AIPC), Chapter 27.
L. Other Publications Affected
None.
M. Equivalent Service Bulletin
For the Challenger 350 aircraft, use SB 350−27−011.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 5 of 9

### Page 7

2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the BD−100,
Aircraft Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
BD−100, Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all the flight−control safety precautions. Refer to
AMM 27−00−00−910−801.
(3) Open the aft equipment−compartment door (182GL). Refer to
AMM 52−41−00−010−801.
(4) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
LCBP B15 PRI STAB TRIM/RUD LIM 211
RCBP B13 SEC STAB TRIM/RUD LIM 212
RCBP B15 AIL TRIM 212
LDCPC A4 PRI STAB MOTOR 311
RDCPC A5 SEC STAB MOTOR 312
B. Special Check/Modification — Inspection and Replacement of the Pitch Trim
Switches in Pilot and Co−Pilot Control Wheels
(1) Loosen the set screw, Part No. NAS1081C04A3L, and carefully pull the pitch
trim switch, Part No. 83452541, from the control wheels, Part No. 83912070
(pilot side) and 83912071 (co−pilot side). Refer to Figure 1, Detail A.
(2) Examine the serial number of the pitch trim switch, Part No. 83452541, per the
affected list in Paragraph 1.A., TABLE 1.
(a) If the serial number of the pitch trim switch is not in the affected list, do as
follows:
(i) Install the existing pitch trim switch, Part No. 83452541, on the pilot
and co−pilot control wheel. Refer to AMM 27−41−01−400−801 and
Figure 1, Detail A.
(ii) Tighten the set screw, Part No. NAS1081C04A3L. Refer to Figure 1,
Detail A.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 6 of 9

### Page 8

(iii) Go to Paragraph 2.D., Close−out.
(b) If the serial number of the pitch trim switch is in the affected list, do as
follows:
(i) Remove and discard the existing pitch trim switch, Part
No. 83452541. Refer to AMM 27−41−01−000−801.
(ii) Install the new pitch trim switch, Part No. 83452541. Refer to
AMM 27−41−01−400−801.
NOTE: Make sure that the serial number of the new pitch trim
switch, Part No. 83452541, is 02000 and subs.
(iii) Go to Paragraph 2.C., Testing.
C. Testing
(1) Remove the tags and close the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
LCBP B15 PRI STAB TRIM/RUD LIM 211
RCBP B13 SEC STAB TRIM/RUD LIM 212
RCBP B15 AIL TRIM 212
LDCPC A4 PRI STAB MOTOR 311
RDCPC A5 SEC STAB MOTOR 312
(2) Do an operational test of the applicable pitch trim switch. Refer to
AMM 27−41−01−710−801.
D. Close−out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Close the aft equipment−compartment door (182GL). Refer to
AMM 52−41−00−410−801.
E. Stock Purge
NOTE: The instructions below are applicable to Bombardier Business Aviation
Services (BBAS), Completion Centers, Authorized Service Facilities,
Spare Parts Center, Montreal, and operator’s stock rooms.
(1) All spare pilot and co−pilot control wheels, vendor Part No. 83912070 (BA Part
No. 1002710011−001) and 83912071 (BA Part No. 1002710011−002), shall be
return to supplier to inspect, and to replace and discard the affected trim switch
with new one having serial numbers 02000 and subs.
(2) All spare trim switch, Part No. 83452541, with serial numbers listed in
Paragraph 1.A., Table 1, shall be discarded.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 7 of 9

### Page 9

F. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Aviation Customer Services
(BACS).
For information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin
Group at the following email address:
bbad_SBgroup@aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
No kits required.
B. Parts
The part that follows may be necessary to do this Service Bulletin and is available
from Bombardier Aviation Parts Services, Montreal:
NEW PART NO. QTY ITEM USEDPART NO. INSTRUCTIONS –DISPOSITION
83452541
(See Note 2) 2 Switch,Trim − −
NOTES: 1. The part numbers for the items listed above are subject to change
without revision to this Service Bulletin. In case of discrepancy
between this list and any other list, the Illustrated Parts Catalog
prevails and shall be used to determine the latest part number.
2. Make sure that the serial number of the part is 02000 and subs .
C. Material
No materials required.
D. Publications
No publications required.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Mar 21/2022 100−27−21
Page 8 of 9

### Page 10

SB100−27−21_001
A
A
PITCH TRIM SWITCH
NAS1081C04A3L
(SETSCREW)
A
CONTROL WHEEL
(REF)
MODEL BD−100−1A10 (CH−300)
Pilot and Co−Pilot Control Wheel Trim Switches
Figure 1
Basic Issue: Mar 21/2022 100−27−21
Page 9 of 9

### Page 11

100−27−21 Basic Mar 21/2022
SPECIAL CHECK/MODIFICATION – PITCH TRIM SYSTEM –
REPLACEMENT OF PITCH TRIM SWITCHES ON PILOT AND CO−PILOT
CONTROL WHEELS
bbad_SBgroup@aero.bombardier.com
NOTE: Please use Salesforce only for troubleshooting issues or when Engineering
deviation is necessary to accomplish the Service Bulletin modification.
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:
For any information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin Group
at the following email address:

### Page 12

SERVICE BULLETIN INCORPORATION SHEET − "100−27−21"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
100−27−21 Basic
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
