# Bombardier Service Bulletin 100-27-23

Copy: No revision named ("BombardierSB_100-27-23_Basic"), 14 pages: PDF https://openairdocs.org/files/sha256/73/f0/73f0650b03747c96975dd3f921772ff83c857f27bd5fb24a5077e706bc61cfcd; text https://openairdocs.org/service-documents/bombardier/sb-100-27-23/file/73f0650b0374.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-1351; AD 2026-02-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-27-23
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-27-23

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-02-06](https://openairdocs.org/ad/2026-02-06.md), effective Feb 25, 2026: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-100-27-23/proposed.md).

## Text (14 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-1351; AD 2026-02-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SPECIAL CHECK/MODIFICATION – HORIZONTAL STABILIZER –
REPLACEMENT OF HORIZONTAL STABILIZER TRIM ACTUATOR (HSTA)
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Refer to Paragraph 1.D.
EFFECTIVITY: BD−100−1A10 aircraft, Serial No. 20003 to 20457
MANPOWER: Refer to Paragraph 1.F.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin may be subject to an Airworthiness Directive.
To place an order for part, please call Bombardier Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 27−40
FLIGHT CONTROLS
Basic Issue: Oct 28/2024 100−27−23
Page 1 of 1
This Service Bulletin is available at:

### Page 2

SPECIAL CHECK/MODIFICATION – HORIZONTAL STABILIZER –
REPLACEMENT OF HORIZONTAL STABILIZER TRIM ACTUATOR (HSTA)
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. They can be reached at
bacs_isit@aero.bombardier.com. The parts will be allocated on a first
come first serve basis.
Should you require additional information, please contact your Regional
Sales Manager (RM) or Field Service Representative (FSR).
For more information on dedicated schedules, refer to SB 100−00−002.
3. If the Horizontal Stabilizer Trim Actuator (HSTA) is removed, then the
personnel necessary is as follows:
− two persons for the removal and installation of the HSTA;
− two persons for the rigging check of the pitch trim system; and
− two persons for the operational test of the pitch trim system.
4. This Service Bulletin is also applicable for the HSTA’s in the operator’s
stock room.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 27−40
FLIGHT CONTROLS
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2024 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Oct 28/2024 100−27−23
Page 1 of 11
This Service Bulletin is available at:

### Page 3

5. For any technical issues, contact Bombardier at
SRPSA@aero.bombardier.com.
A. Effectivity
BD−100−1A10 aircraft, Serial No. 20003 to 20457 with the Horizontal Stabilizer
Trim Actuator (HSTA) Serial Numbers listed in the table that follows:
TABLE 1 - HSTA SERIAL NUMBERS
PART NO. NOMENCLATURE SERIAL NUMBERS
C47100−004
C47100−005
HORIZONTAL
STABILIZER
TRIM ACTUATOR
012, 014, 019, 044K, 064K, 073, 094,
099, 112, 131, 139, 141, 152, 162, 186,
249, 281, 319, 325K, 328, 350A, 352K,
357, 375, 403, 469, 591.
(See NOTE 2)
NOTES: 1. The instructions given in this Service Bulletin are only applicable to
the systems and parts installed at the time of delivery of the aircraft or
as changed by Bombardier Service Bulletin(s).
2. Serial Numbers indicated in the Table are those known at the time of
Service Bulletin release. This Service Bulletin applies whether or not
suffix letters ’A’ or ’K’ appears following the Serial Number numerical
digits.
B. Reason
1. Condition:
Bombardier (BA) has been advised that the overhaul required by Certification
Maintenance Requirement (CMR) task 27−40−00−104* was not fully completed
on some units. On the affected HSTAs, some of the parts that were required to
be replaced as part of the overhauled task were re−installed in error. This
condition has been isolated to 27 HSTAs that are installed on in service
aeroplanes.
2. Objective/Benefit:
This Service Bulletin instructs to inspect the Horizontal Stabilizer Trim Actuator
(HSTA) Serial Numbers and if applicable replace the HSTA and return the
affected HSTA for rework.
C. Description
This Service Bulletin gives instructions in PART A, to:
− Verify the HSTA Serial Number (S/N) in the airplane maintenance tracking
records, or get access to the HSTA to do a visual check of the identification
plate to make sure this Service Bulletin is applicable to your aircraft,
− If applicable, do PART B of this Service Bulletin, and
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 2 of 11

### Page 4

− If the HSTA Serial Number is not applicable, no further action is required.
This Service Bulletin gives instructions in PART B, to:
− Remove the affected HSTA,
− Send the HSTA for rework, and
− Install the HSTA.
After PART B:
− Do the necessary tests to make sure that the system operates correctly.
D. Compliance
For affected HSTA serial numbers with Component Time Since New greater
than or equal to 10,000FHs
Recommended before the affected HSTAs Serial numbers have accumulated
14,500FHs (Component Time Since New) OR 7,500FCs (Component Cycles Since
New) OR within 24 months from release of this Service Bulletin (Basic Issue), which
ever comes first.
For affected HSTA serial numbers with Component Time Since New greater
than or equal to 9,700FHs AND Component Time Since New less than
10,000FHs
Recommended before the affected HSTAs Serial numbers have accumulated
14,500FHs (Component Time Since New) OR 7,500FCs (Component Cycles Since
New) OR within 36 months from release of this Service Bulletin (Basic Issue), which
ever comes first.
For affected HSTA serial numbers with Component Time Since New less than
9,700FHs
Recommended before the affected HSTAs Serial numbers have accumulated
14,500FHs (Component Time Since New) OR 7,500FCs (Component Cycles Since
New) OR within 48 months from release of this Service Bulletin (Basic Issue), which
ever comes first.
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the aircraft configuration, submit an SRPSA for analysis and
get an approved disposition to complete this Service Bulletin. Standard
SRPSA fees may apply. Refer to services section of myBombardier for the
latest prices, rates and fees.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 3 of 11

### Page 5

E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTES: 1. The hours given are to help you schedule the tasks given in this
Service Bulletin. The hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to
SB 100−00−002.
2. Labor hours are based on the fact that the modification will be done at
the next scheduled maintenance task or inspection. Therefore no
hours are allotted to prepare the aircraft for maintenance or to prepare
for this Service Bulletin.
2 hours are necessary to do PART A of this Service Bulletin.
NOTE: 0.5 hour is necessary to do PART A of this Service Bulletin if the HSTA is
not installed in an aircraft (example: HSTA in the stock room).
Bombardier does not pay for the labor to do PART A of this Service Bulletin.
20 hours are necessary to do PART B of this Service Bulletin.
The labor required to do PART B of this Service Bulletin is at no cost if:
− the work is done at Bombardier or Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled in less than 14,500 flight hours (COMPONENT
Time Since New) or 7500 flight cycles (COMPONENT Cycles Since New),
whichever comes first.
G. Material − Cost and Availability
No kit or material is necessary to do this Service Bulletin.
The part in Paragraph 3.B. is necessary to do PART B of this Service Bulletin.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 4 of 11

### Page 6

The part required to do PART B is available at no cost if:
− a no−charge purchase order is sent to Bombardier in less than 14,500 flight
hours (COMPONENT Time Since New) or 7500 flight cycles (COMPONENT
Cycles Since New), whichever comes first.
This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are
used to reserve and manage inventory due to limited availability of rotable stock,
parts and/or kits. Parts are limited, therefore, advance part scheduling with our
In−Service Implementation Team (ISIT) is recommended prior to a maintenance
visit. They can be reached at bacs_isit@aero.bombardier.com. The parts will be
allocated on a first come first serve basis.
Should you require additional information, please contact your Regional Sales
Manager (RM) or Field Service Representative (FSR).
For more information on dedicated schedules, refer to SB 100−00−002.
Bombardier is maintaining a rotable pool of replacement HSTA, to be supplied to
the operators under the terms and conditions given below:
NOTES: 1. The removed HSTA must be returned to Bombardier Parts Services in
less than 10 days of receipt of replacement unit, with documentation
showing the serial number of the aircraft.
2. If the removed HSTA is not returned in less than 10 days, the
operator will be charged for the replacement unit.
Send removed HSTA, Part No. C47100−004 or C47100−005 for rework to
Bombardier at the address given below:
Learjet Inc. − Core Returns
251−A Wille Road
Des Plaines, Illinois
60018−1861
USA
or
Distribution Centre Frankfurt − Core Returns
Bombardier Company GmbH
Hans−Boeckler−Strasse 9
GROSS−GERAU Hesse 64521
Germany
Refer to your Material Return Authorization (MRA) form to find the applicable return
address.
For all parts transactions, Bombardier’s current Spare Parts and Component Repair
Price Catalogue General Terms and Conditions apply. These terms and conditions
are found on myBombardier at:
my.bombardier.com
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 5 of 11

### Page 7

During or after the above free period, Smart Parts does not pay for the part.
H. Tooling
The equipment and tools listed below are necessary to this modification.
GSE REFERENCE NO. PART NO. DESCRIPTION
20−00−04 − Inclinometer(See Note 4)
24−00−24 S4933959−501 Circuit Breaker Tag
27C−40−01 G1002740054−001 HSTA go−no go Gauge(See Note 4)
27C−40−05 CA14064−001 HSTA SpannerWrench/Torque Adapter
27C−40−06 CA14065−001 HSTA SpannerWrench/Torque Adapter
27C−41−01 C84215−001 HSTA Rigging Bar
27C−43−02 C47961−001 HSTA Scissor Jack
Commercially Available − 5/32 in (4 mm) DiameterPin Punch
Commercially Available − Standard 12 oz Ball PeenHammer (or equivalent)
Commercially Available − Wrench Torque
NOTES: 1. Refer to the BD−100 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM BD−100, for acceptable
GSE equivalents.
3. This list is provided for a quick reference. In case of discrepancy
between this list and the tool called out in the SPM, WM, Chapter 20,
then the tool called in the SPM, WM will prevail. Other approved
alternative tools are acceptable and can also be used.
4. These tools are only required for testing section.
I. Weight and Balance
No change.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 6 of 11

### Page 8

J. Electrical Load Data
No change.
K. References
− Bombardier, Restriction and/or Special Instruction (RSI), C−100−000−27−0327,
Rev. −−.
− MOOG, Service Bulletin C47100−27−07 (attached).
− Bombardier, Standard Practices Manual (SPM), Chapters 20 and 51.
− CH 300 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 27, 52 and 55.
− CH 300 Aircraft Illustrated Parts Catalog (AIPC), Chapter 27.
L. Other Publications Affected
None.
M. Equivalent Service Bulletin
− For the Challenger 350 aircraft, use Service Bulletin 350−27−014.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the BD−100,
Aircraft Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
BD−100 Aircraft Maintenance Manual (AMM), Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all flight−control safety precautions. Refer to AMM 27−00−00−910−801.
(3) Install the applicable warning placards on the control wheels, control columns,
TRIM/STALL control panel, and from the area near the elevator control
surfaces and the horizontal stabilizer surface.
(4) Connect electrical power to the aircraft. Refer to AMM 24−00−00−861−801.
(5) On the TRIM/STALL control panel, set the STAB trim switch to PRI.
(6) On the pilots control wheel, do the procedure that follows:
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 7 of 11

### Page 9

PROCEDURE APPLICABLE RESULT
Push in the pitch/roll trim switch, set
the switch to NOSE UP or NOSE
DOWN, and trim the horizontal
stabilizer surface to the neutral
position.
On the Engine Indication and Crew
Alerting System (EICAS) primary
page, make sure that the STAB trim
position indicator moves to the
neutral position and shows 1.9 to 2.1
units.
(7) Remove the electrical power from the aircraft. Refer to
AMM 24−00−00−861−802.
(8) Open the aft equipment−compartment door (182GL). Refer to
AMM 52−41−00−010−801.
(9) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
LCBP B15 PRI STAB TRIM / RUD LIM 211
RCBP B13 SEC STAB TRIM / RUD LIM 212
LDCPC A4 PRI STAB MOTOR 311
RDCPC A5 SEC STAB MOTOR 312
B. PART A – Check of the HSTA Serial Numbers
(1) Verify the HSTA Serial Numbers in the airplane maintenance tracking records,
(or)
(2) Remove the forward access panel (346BR). Refer to
AMM 55−30−21−000−802.
(3) Examine the HSTA identification plate and make a record of the part number
and HSTA Serial Numbers.
(4) Cross check the HSTA Serial Number against the affected Serial Numbers
listed in the Moog SB C47100−27−07 effectivity list referenced in Table 2.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 8 of 11

### Page 10

TABLE 2 - MOOG SB C47100-27-07 EFFECTIVITY
PART NO. NOMENCLATURE SERIAL NUMBERS
C47100−004
C47100−005
HORIZONTAL
STABILIZER
TRIM
ACTUATOR
012, 014, 019, 044K, 064K, 073, 094,
099, 112, 131, 139, 141, 152, 162, 186,
249, 281, 319, 325K, 328, 350A, 352K,
357, 375, 403, 469, 591.
(See NOTE)
NOTE: Serial Numbers indicated in the Table are those known at the time of
Service Bulletin release. This Service Bulletin applies whether or not
suffix letters ’A’ or ’K’ appears following the Serial Number numerical
digits.
(a) If the HSTA Serial Number is listed in Moog SB C47100−27−07 effectivity
list, examine the HSTA for modification plate installation as shown in
Figure 3−1 of the Moog SB C47100−27−07. If the modification plate is not
installed or if SB C47100−27−07 is not shown, do PART B of this Service
Bulletin to replace the HSTA and return the defective HSTA for rework.
(b) If the HSTA Serial Number is not listed in Moog SB C47100−27−07
effectivity list or if Moog SB C47100−27−07 is shown on the modification
plate, no further action is required. Go to Paragraph 2.E. (Close−out).
C. PART B – Replacement of HSTA
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
Standard SRPSA fees may apply. Refer to the Services section of
myBombardier for the latest prices, rates and fees.
(1) Remove the HSTA, Part No. C47100−004 or C47100−005. Refer to
AMM 27−41−05−000−801.
(2) Send the removed HSTA, Part No. C47100−004 or C47100−005 for rework to
the address shown in Paragraph 1.G.
(3) Install the replacement unit HSTA. Refer to AMM 27−41−05−400−801.
NOTE: The replacement HSTA shall have a modification plate marked with
Moog SB C47100−27−07 or a Serial Number out of the range of
Moog SB C47100−27−07.
D. Testing
(1) Do the rigging check of the pitch trim system. Refer to
AMM 27−41−00−220−801.
(2) Do the operational test of the pitch trim system. Refer to
AMM 27−41−00−710−801.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 9 of 11

### Page 11

E. Close−out
(1) If applicable, install the LH−lower bullet−fairing panel (346CL). Refer to
AMM 55−30−21−400−804.
(2) If applicable, install the RH−lower bullet−fairing panel (346CR). Refer to
AMM 55−30−21−400−805.
(3) If applicable, install the forward access panel (346BL). Refer to
AMM 55−30−21−400−802.
(4) If applicable, install the lower visor fairing (346ALZ/346ARZ). Refer to
AMM 55−10−15−400−802.
(5) If applicable, install the upper visor fairing (346BLZ/346BRZ). Refer to
AMM 55−10−15−400−801.
(6) Install the forward access panel (346BR). Refer to AMM 55−30−21−400−802.
(7) Remove the tag and close the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
LCBP B15 PRI STAB TRIM / RUD LIM 211
RCBP B13 SEC STAB TRIM / RUD LIM 212
LDCPC A4 PRI STAB MOTOR 311
RDCPC A5 SEC STAB MOTOR 312
(8) Close the aft equipment − compartment door (182GL). Refer to
AMM 52−41−00−410−801.
(9) Connect electrical power to the aircraft. Refer to AMM 24−00−00−861−801.
(10) On the TRIM/STALL control panel, set the STAB trim switch to PRI.
(11) Use the pilots control wheel to set the horizontal stabilizer to the neutral
position, refer to the procedure that follows:
PROCEDURE APPLICABLE RESULT
Push in the pitch/roll trim switch, set
the switch to NOSE UP or NOSE
DOWN, and trim the horizontal
stabilizer surface to the neutral
position.
On the engine indication and crew
alerting system (EICAS) primary
page, make sure that the STAB trim
position indicator moves to the
neutral position and shows 1.9 to 2.1
units.
(12) Remove the electrical power from the aircraft. Refer to
AMM 24−00−00−861−802.
(13) Remove the warning placards from the control wheels, control columns,
TRIM/STALL control panel, elevator control surfaces, and the horizontal
stabilizer surface.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 10 of 11

### Page 12

(14) Remove all tools, equipment and unwanted materials from the aircraft.
F. Recording
You can do each PART of this Service Bulletin independently. When any PART of
this Service Bulletin is completed, make an entry in the aircraft log and send the
attached Incorporation Sheet to Bombardier.
For information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on myBombardier, please contact the Service Bulletin Group at
the following email address:
bbad_SBgroup@aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
No kits required.
B. Parts
The part that follows is necessary to do PART B of this Service Bulletin and is
available from Bombardier Parts Services, Montreal:
NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
C47100−004
or
C47100−005
1 Horizontal StabTrim Actuator C47100−004orC47100−005 Refer toParagraph 1.G.
NOTE: The part number for the item listed above is subject to change without
revision to this Service Bulletin. In case of discrepancy between this list
and any other list, the Illustrated Parts Catalog prevails and shall be used
to determine the latest part number.
C. Material
No materials required.
D. Publications
No publications required.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Oct 28/2024 100−27−23
Page 11 of 11

### Page 13

100−27−23 Basic Oct 28/2024
SPECIAL CHECK/MODIFICATION – HORIZONTAL STABILIZER –
REPLACEMENT OF HORIZONTAL STABILIZER TRIM ACTUATOR (HSTA)
bbad_SBgroup@aero.bombardier.com
NOTE: Please use Salesforce only for troubleshooting issues or when Engineering
deviation is necessary to accomplish the Service Bulletin modification.
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:
For any information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin Group
at the following email address:

### Page 14

SERVICE BULLETIN INCORPORATION SHEET − "100−27−23"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
100−27−23 Basic
COMPLIED WITH
YES    NO    N/A
PART A
PART B
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
