# Bombardier Service Bulletin 100-29-14

Copy: No revision named ("U.S. DOT/FAA - SB 1001-29-14-Basic"), 14 pages: PDF https://openairdocs.org/files/sha256/d9/98/d9980bf6fdaffd36322518f46afeca231494afd3cfc6d5811682e9ded5315f4d; text https://openairdocs.org/service-documents/bombardier/sb-100-29-14/file/d9980bf6fdaf.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2012-0930; AD 2013-11-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-29-14
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-29-14

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-20-16](https://openairdocs.org/ad/2018-20-16.md), effective Nov 23, 2018: No revision named
- [AD 2013-11-12](https://openairdocs.org/ad/2013-11-12.md), effective Jul 9, 2013: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/bombardier/sb-100-29-14/proposed.md).

## Text (14 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2012-0930; AD 2013-11-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Basic Issue: Dec 16/2010 100-29-14 
  Page 1 of 1 
SERVICE BULLETIN SUMMARY This Service Bulletin is available at: 
www.cic.bombardier.com 
BD-100-1A10 (CL-300) 
ATA 29-21 
HYDRAULIC POWER 
SPECIAL CHECK/MODIFICATION – AUXILIARY HYDRAULIC SYSTEM – 
REPLACEMENT OF ACCUMULATOR, PART NO. 900095-1 
The information below is provided for your reference.  For full details, please 
see corresponding paragraph contained within this bulletin. 
RECOMMENDED SPECIFIED TIME COMPLIANCE COMPLIANCE TIME Refer to Paragraph 1.D. 
EFFECTIVITY: A/C Serial No. 20003 to 20335 
MANPOWER: 5 man-hours 
TLMC, CH 5, PART 4 REQUIREMENT YES  NO  
KITS and/or PARTS YES  NO  
TOOLING/GSE YES  NO  
PLANNING INFORMATION: See important 
information at the start of Paragraph 1. YES  NO  
DEDICATED SCHEDULE YES  NO  
PREREQUISITE SERVICE BULLETINS: N/A 
NOTES: This Service Bulletin is expected to be the subject of an Airworthiness Directive  
 which will make it necessary to implement this Service Bulletin. 
 Due to a limited quantity of spare accumulators, we strongly suggest that the 
 Service Bulletin be accomplished only at the due cycle.  
To place an order for parts or kits, please call Bombardier Parts Logistics at: 
514-855-2999 or 1-866-538-1247

### Page 2

Refer to applicable governmental agency regulations and requirements and make sure that the work described in this 
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry 
standards. 
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or 
by any means without the prior written consent of Bombardier Inc. and/or its affiliates. 
© 2010 Bombardier Inc.  All rights reserved 
Challenger*, Global Express*, Global Express XRS*, Global 5000*, Learjet* are Trademarks of Bombardier Inc. 
Basic Issue: Dec 16/2010 100-29-14 
  Page 1 of 9 
SERVICE BULLETIN This Service Bulletin is available at: 
www.cic.bombardier.com 
BD-100-1A10 (CL-300) 
ATA 29-21 
HYDRAULIC POWER 
SPECIAL CHECK/MODIFICATION – AUXILIARY HYDRAULIC SYSTEM – 
REPLACEMENT OF ACCUMULATOR, PART NO. 900095-1 
1. PLANNING INFORMATION 
NOTES: 1. This Service Bulletin is applicable to all auxiliary hydraulic system 
accumulators (herein referred to as accumulator), Part No. 900095-1 
which does not have the letter “E” as part of the suffix stamped on the 
serial number plate. 
 2. This Service Bulletin is also applicable for the auxiliary hydraulic system 
accumulators in the operator’s stock room with Part No. 900095-1 which 
do not have the letter “E” as part of the suffix stamped on the serial 
number plate. 
A. Effectivity 
BD-100-1A10 aircraft, Serial No. 20003 to 20335. 
NOTE: The instructions given in this Service Bulletin are only applicable to the  
systems and parts installed at the time of delivery of the aircraft or as  
changed by Bombardier Aerospace Service Bulletin(s). 
Before you do this bulletin, examine all STC, STA or equivalent action  
changes to make sure that this bulletin can be completed.

### Page 3

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 2 of 9 
B. Reason 
Field evidence has shown from the Regional Jet family that the screw caps of  
the accumulator are susceptible to cracking after 3500 flight cycles.  This could 
possibly lead to a screw cap release, which in turn may cause damage to the 
aircraft structure and/or systems. 
This Service Bulletin gives instructions to inspect and if required, replace the 
accumulator in accordance with the compliance given in Paragraph 1.D. with a 
new or repaired unit with the same part number that has the letter “E” as part of 
the suffix stamped on the serial number plate. 
C. Description 
This Service Bulletin gives instructions to: 
– Get access to the auxiliary hydraulic system, 
– Inspect the accumulator to determine: 
– If the accumulator must be replaced, or 
– If the accumulator requires identification. 
– If the unit must be replaced, remove the accumulator, 
– Return the removed accumulator for a new or repaired unit, 
– Install the new or repaired accumulator, and 
– Do the necessary tests to make sure the system operates correctly. 
D. Compliance 
For accumulators that have less than 3150 flight cycles at the release date of this 
Service Bulletin, replace the accumulator before 3500 flight cycles. 
For accumulators that have more than 3150 flight cycles at the release date of 
this Service Bulletin, replace the accumulator within the next 350 flight cycles. 
For accumulators where the flight cycles are unknown and accumulators that 
have been replaced and history of replaced hydraulic accumulators is unknown at 
the release date of this Service Bulletin, replace the accumulator within the next 
350 flight cycles. 
NOTE:   Due to a limited quantity of spare accumulators, we strongly suggest that 
the Service Bulletin be accomplished only at the due cycle.  
E. Approval 
The technical content of this Service Bulletin has been approved under  
the authority of Transport Canada Civil Aviation (TCCA) Design Approval 
Organization (DAO) No. DAO #93-Q-02. 
NOTES: 1. The technical content of this Service Bulletin is accepted by the  
FAA under the Canada/USA bilateral Aviation Safety Agreement. 
2. The technical content of this Service Bulletin is accepted by the  
JAA and by EASA in accordance with established procedures.

### Page 4

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 3 of 9 
F. Manpower 
NOTES: 1. The man-hours given are estimates to help you schedule the tasks  
given in this bulletin.  The estimates are for direct labor performed by  
an experienced crew and do not include the time for familiarization, 
planning, aircraft preparation in hangar such as towing and 
positioning of scaffolds, removal of interior furnishings, repainting, 
supervision and inspection. 
For more information related to the manpower estimates, refer to  
SB 100-00-02. 
2. This Service Bulletin may require consumable materials that have 
specific curing times (refer to Paragraph 3).  The accumulated curing 
time is not included in the labor estimates and should be considered 
for planning purposes before you schedule this Service Bulletin. 
1 man-hour is necessary to do the special check. 
4 man-hours are necessary to do the modification. 
The labor required to do the special check and modification of this Service 
Bulletin is at no cost if: 
(i) the work is done during new aircraft warranty period, and 
(ii) the work is done at Bombardier Business Aviation Services (BBAS) 
or Authorized Service Facilities (ASF), and 
(iii) accumulator flight cycles are unknown or greater than 3150. 
G. Material - Cost and Availability 
No kit is necessary to do this modification.  For material data, refer to 
Paragraph 3. 
Accumulator, Part No. 900095-1 with the suffix “E” stamped on the serial number 
plate is required to do this Service Bulletin, and is available at no cost if a no-
charge purchase order is sent to Bombardier Aerospace within the time 
compliance given in Paragraph 1.D. 
Return Accumulator, Part No. 900095-1 and which does not have the letter “E” as 
part of the suffix stamped on the serial number plate (except the serial numbers 
listed in Table 1 and Serial Nos. 60199-1413 to 60199-1553 of Parker, Service 
Bulletin, 900095-1-29-394), to the address shown below: 
Learjet Core Returns 
8219 West Irving, Bldg 9, Dock 9, 
Wichita, KS 67209 
USA

### Page 5

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 4 of 9 
This Service Bulletin is covered by a dedicated schedule.  To ensure a timely  
and effective return/upgrade program, advance scheduling is required through 
our In-Service Implementation Team (ISIT).  Please contact your Regional 
Manager (RM), Field Service Representative (FSR) or Customer Service 
Representative (CSR) as soon as is practical to schedule your aircraft. 
During or after the above free period, Smart Parts Plus does not pay for the part. 
H. Tooling 
GSE REFERENCE NO. PART NO. DESCRIPTION 
24-00-24 S4933959-501 Tag, Circuit Breaker 
Commercially Available - Container, Hydraulic Fluid, 
1 U.S. gal (3.79 L) 
Commercially Available - Wrench, Torque 
NOTES: 1. Refer to the BD-100 Illustrated Tool and Equipment Manual to make 
sure that you use the correct equipment configuration. 
2. Refer to the Liability Statement for acceptable GSE equivalents.  
I. Weight and Balance 
No change. 
J. Electrical Load Data 
No change. 
K. References 
– Bombardier Aerospace, Restriction and/or Special Instruction (RSI), 
C-100-000-29-0055, Rev. B. 
– BD-100 Aircraft Maintenance Manual (AMM), Chapters 6, 12, 24, 29, and 52. 
– BD-100 Standard Practices Manual (SPM), Chapter 51. 
– Parker, Service Bulletin, 900095-1-29-394. 
L. Other Publications Affected 
– BD-100 Aircraft Illustrated Parts Catalog (AIPC), Chapter 29. 
M. Equivalent Service Bulletin 
None.

### Page 6

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 5 of 9 
2. ACCOMPLISHMENT INSTRUCTIONS 
NOTES: 1. All TASKs referenced in the procedures that follow are from the  
BD-100 Aircraft Maintenance Manual, unless otherwise specified. 
2. All references made to zones, access panels and/or doors, are 
from the BD-100 Aircraft Maintenance Manual, Chapter 6. 
A. Aircraft Setup 
(1) Obey all the electrical/electronic safety precautions.  Refer to 
TASK 24-00-00-910-801. 
(2) Obey all the hydraulic safety precautions.  Refer to TASK 29-00-00-910-801. 
(3) Obey all the hydraulic technical precautions.  Refer to TASK 29-00-00-910-802. 
(4) Open and tag the circuit breaker that follows: 
LOCATION CB NO. NAME ZONE 
LCBP D10 AUX HYDRAULIC DC PUMP 211 
(5) Release the hydraulic pressure from the auxiliary hydraulic system.  Refer to 
TASK 29-20-00-862-802. 
(6) Open the aft equipment-compartment door 182GL.  Refer to  
TASK 52-41-00-010-801. 
B. Special Check 
(1) Examine the Accumulator, Part No. 900095-1, to make sure that the letter “E” 
is not part of the suffix stamped on the serial number plate, and if: 
(a) The suffix “E” is not part of the suffix stamped on the serial number plate, 
go to Paragraph 2.B.(2). 
(b) If the suffix “E” is part of the suffix stamped on the serial number plate, 
go to Paragraph 2.E.

### Page 7

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 6 of 9 
(2) For accumulator serial number “ 60199-1413 to 60199-1553”, or the serial 
numbers listed in Table 1 below, permanently stamp the suffix “E” on the 
serial number plate, and go to Paragraph 2.E. 
Table 1: Units Repaired and Require “E” Marking 
60199-0030 60199-1084 60199-1168 
60199-0034 60199-1123 60199-1258 
60199-0090 60199-1140 60199-1275 
60199-0097 60199-1145 60199-1282 
60199-0119 60199-1158 60199-1308 
60199-0230 60199-1159 60199-1310 
60199-1060 60199-1166 60199-1329 
60199-1061 60199-1167 60199-1381 
NOTE: For the serial numbers listed above, the new screw caps were 
installed and end caps were replaced or verified, but is necessary  
to incorporate Parker Service Bulletin, 900095-1-29-394 to add the 
letter “E” to the serial number. 
(3) If the accumulator serial number is not listed in Paragraph 2.B.(2), go to 
Paragraph 2.C. 
C. Modification 
(1) Remove the accumulator.  Refer to TASK 29-21-13-000-801. 
(2) Return the accumulator to the address shown in Paragraph 1.G. 
NOTES: 1. Make sure that the flight cycles of the accumulator are recorded 
and that the information is returned with the unit. 
2. If the flight cycles are not known, enter “flight cycles unknown”. 
(3) Install a new or repaired accumulator, Part No. 900095-1 with the letter “E”  
as part of the suffix stamped on the serial number plate.  Refer to TASK  
29-21-13-400-801.

### Page 8

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 7 of 9 
D. Testing 
(1) Remove the tag and close the circuit breaker that follows: 
LOCATION CB NO. NAME ZONE 
LCBP D10 AUX HYDRAULIC DC PUMP 211 
(2) Do a servicing of the accumulator.  Refer to TASK 12-12-00-614-801. 
(3) Pressurize the auxiliary hydraulic system.  Refer to TASK 29-20-00-862-801. 
NOTE: Make sure that there is no hydraulic fluid leakage around the  
accumulator. 
(4) Bleed the auxiliary hydraulic system.  Refer to TASK 29-20-00-870-801. 
(5) Do a servicing of the auxiliary hydraulic system.  Refer to  
TASK 12-12-00-611-801. 
(6) Clean all the hydraulic fluid leakage from the work area.  Refer to  
SPM-MM TASK 51-25-00-110-801. 
E. Close-out 
(1) Remove all tools, equipment, and unwanted materials from the work area. 
(2) Close the aft equipment-compartment door 182GL.  Refer to  
TASK 52-41-00-410-801. 
F. Recording 
When this Service Bulletin is completed, make an entry in the aircraft log and 
send the attached Incorporation Notice to Bombardier Business Aircraft Customer 
Services (BBACS).

### Page 9

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 8 of 9 
3. MATERIAL INFORMATION 
A. Kit 
No kits required. 
B. Parts 
The part that follows is necessary to do this Service Bulletin and is available from 
Bombardier Aerospace Parts Logistics, Montreal: 
NEW  
PART NO. 
QTY ITEM USED 
PART NO. 
INSTRUCTIONS - 
DISPOSITION 
900095-1 with 
the letter “E” as 
part of the suffix 
stamped on the 
serial number 
plate. 
1 Accumulator, 
Auxiliary 
Hydraulic 
900095-1 Refer to 
Paragraph 1.G. 
NOTE: The part number for the item listed above is subject to change without 
revision to this Service Bulletin.  In case of discrepancy between this list 
and any other list, the Illustrated Parts Catalog prevails and shall be used 
to determine the latest part number.

### Page 10

MODEL BD-100-1A10 (CL-300) 
Basic Issue: Dec 16/2010 100-29-14 
  Page 9 of 9 
C. Material 
The materials that follow, or equivalent, are necessary to do this Service Bulletin.   
These can be purchased from a local supplier.  .Bombardier Aerospace does not  
pay for these consumables. 
DESCRIPTION PART 
No./NAME 
SPECIFICATION QUANTITY SUPPLIER  
(See Note) 
Fluid, 
Hydraulic, 
Phosphate 
Ester 
Fire-Resistant 
HYJET IV-A BAMS 564-003 As 
Necessary  
Code: A 
Nitrogen - BB-N-411, 
Type 1, Class 1 
As 
Necessary  
Code: B 
NOTES: 1. Refer to the table that follows for each supplier’s address listed by 
codes. 
2. The Curing Time (CT), if applicable, for each consumable material is 
indicated with the description of each product. 
3. At time of release of this Service Bulletin, the information on the 
supplier was valid and accurate.  In the event that this information 
has changed, the operator is encouraged to use the World Wide 
Web to find a local supplier. 
SUPPLIERS ADDRESSES BY CODES 
Code: A 
Exxon Mobil 
3225 Gallows Road 
Fairfax, VA 22037 
U.S.A. 
Tel.: 1-800-662-4525 
Fax: 1-703-846-6693 
www.exxonmobile.com 
Code: B 
Commercially Available 
D. Publications 
No publications required.

### Page 11

THANK YOU FOR YOUR RESPONSE! 
PLEASE RETURN THIS COMPLETED EVALUATION FORM BY MAIL, E-MAIL OR FAX 
SERVICE BULLETIN EVALUATION FORM 
(Your ideas will help us provide better bulletins) 
SERVICE BULLETIN: 100-29-14 ISSUE: Basic DATED: Dec 16/2010 
      
TITLE: Special Check/Modification – Auxiliary Hydraulic System – Replacement of 
Accumulator, Part No. 900095-1 
 STRONGLY 
DISAGREE 
DISAGREE AGREE STRONGLY 
AGREE 
N/A 
x Instructions to do the Service Bulletin  
were accurate. 
 Comments: 
     
x Illustration(s), figure(s), and/or kit drawing(s) 
were helpful to carry out instructions. 
 Comments: 
     
x If a kit and/or parts were required, did the 
contents of the kit and/or parts received agree 
with the contents listed in the bulletin? 
 Comments: 
     
x The consumable materials listed under 
Paragraph 3 were easily procured. 
 Comments:  
     
x Work was accomplished in the prescribed time. 
Comments:      
x Overall, I was satisfied with this Service Bulletin. 
 Comments:       
For 
administrative 
use only 
PLEASE SUPPLY US WITH THE FOLLOWING DATA AND FAX TO: (514) 855-7634  
or  
E-MAIL TO: MTL_BBAD_SB_Evaluation@aero.bombardier.com 
 OPERATOR:  
052NI AIRCRAFT SERIAL NO.:  
 TELEPHONE:  
 FACSIMILE:  
 NAME: (Please print)

### Page 12

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
 
 
 
 
 
Bombardier Business Aircraft Customer Services (BBACS) 
P.O. Box 6087, Station Centre-ville 
Montréal, Québec, Canada H3C 3G9 
 
Attention: Customer Support Department 
 
 
 
 
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

### Page 13

SERVICE BULLETIN INCORPORATION SHEET – “100-29-14” 
 
BOMBARDIER 
SUBMISSION Upon completion of the Service Bulletin, please fill-in, fax to 
(514) 855-8798 or e-mail to Fracas at fracas.montreal@aero.bombardier.com 
 
If your aircraft is registered on CAMP and you are reporting to them, 
please do not send the incorporation sheet to Bombardier. If your aircraft 
is on another tracking system, please contact Bombardier to make 
arrangements for automated data submission. 
 
 
           COMPLIED WITH  
 Service Bulletin 
Number 
 Rev.  * Parts 
Completed 
 YES NO N/A Remarks/Reason 
 100-29-14  Basic  -       
 -  -  -       
 -  -  -       
 
 Actual hours to accomplish Service Bulletin:    
 
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A, 
B, C, D, etc.) which can be carried out separately, indicate only those parts 
completed at this time. 
2. For repetitive checks (usually PART A) only the initial check should be 
reported unless otherwise stated in the Service Bulletin. 
* NOTES:  
 
 
  
  3. When more than one part is carried out at the same time, each part should be 
reported. 
 
 Aircraft Serial No.   Aircraft Reg. No.   
 Airframe Hours:   Airframe Landings   
 S.B. Incorporation date   Service Order No.   
  (dd/mm/yy)    
 Facility Incorporating S.B.  
 Name  Signature  Date  
                               (dd/mm/yy) 
 
Signature not required if sent by E-Mail

### Page 14

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --  
 
 
 
 
 
Bombardier Business Aircraft Customer Services (BBACS) 
P.O. Box 6087, Station Centre-ville 
Montréal, Québec, Canada H3C 3G9 
 
Attention: Customer Support Department, Maintenance Engineering 
 
 
 
 
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
