# Bombardier Service Bulletin 100-32-20

Copy: Revision 02 ("SB 100-32-20 rev 2"), 32 pages: PDF https://openairdocs.org/files/sha256/f5/be/f5be3dbd8fd5005bf4a0f038fc0b5968c9e63bdb750b33ba1fe369a6f44db507; text https://openairdocs.org/service-documents/bombardier/sb-100-32-20/file/f5be3dbd8fd5.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0161; AD 2018-20-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-32-20
- Latest revision known: 100-32-20, Revision 02, dated April 14, 2015 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-32-20

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-20-16](https://openairdocs.org/ad/2018-20-16.md), effective Nov 23, 2018: Revisions 01 and 02

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-100-32-20/proposed.md).

## Text (32 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0161; AD 2018-20-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

100-32-20Page 1 of 1
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
MODEL BD-100-1A10 (CL-300)
Discard the Revision 01 of this Service Bulletin dated Feb 25/2013, and the
Information Sheet dated Jun 13/2013 and replace in its entirety with this Revision 02.
Service Bulletin No. 100-32-20
Date of Basic Issue Feb 25/2013
Revision No. 01 Dated Mar 05/2013
Revision No. 02 Dated Apr 14/2015
This revision has no effect for aircraft on which the Basic Issue or Revision 01 of
this Service Bulletin was done thus no other action is necessary.  Do not sign
the log book if you have not done this revision.  Keep the previous log book
entry.  You may make an entry as “Not Applicable” for this revision.
This revision is issued to:
1. Change, in Paragraph 1.K., the revision of Modification Summary BB100T010577
to Rev. F.
2. Change, in Paragraph 1.K., the revision of Kit Drawing K1002910001 to Rev. E.
3. Add, in Paragraph 2.B.(9) (e), NOTE 2.
4. Add, in Paragraph 2.B.(10) (e), NOTE 2.
5. Add, in Paragraph 2.B.(14), a reference to AMM TASK 32-43-37-400-801.
6. Add, in Paragraph 2.B.(15), a reference to AMM TASK 32-44-05-400-801.
7. Revise Kit Drawing K1002910001 to Rev. E.
8. Make miscellaneous minor changes, as necessary, with no change of context.

### Page 2

Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 1 of 1
SERVICE BULLETIN SUMMARYThis Service Bulletin is available at:
www.cic.bombardier.com
MODEL BD-100-1A10 (CL-300)
ATA 32-43
LANDING GEAR
MODIFICATION – BRAKE CONTROL SYSTEM – MODIFICATION OF THE BRAKE
ACCUMULATORS INSTALLATION
The information below is provided for your reference.  For full details, please
see corresponding paragraph contained within this bulletin.
RECOMMENDEDSPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 1600 flight hours or by October 2017
whichever comes first from this
Service Bulletin release date (Basic Issue)
EFFECTIVITY: A/C Serial No. 20003 to 20395
MANPOWER: 50 man-hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN
YES NO
TLMC, CH 5 AFFECTED YES NO
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION:  See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin is expected to be the subject of an Airworthiness Directive
which will make it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514-855-2999 or 1-866-538-1247

### Page 3

Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry
standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
© 2013 - 2015 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 1 of 27
SERVICE BULLETINThis Service Bulletin is available at:
www.cic.bombardier.com
MODEL BD-100-1A10 (CL-300)
ATA 32-43
LANDING GEAR
MODIFICATION – BRAKE CONTROL SYSTEM – MODIFICATION OF THE BRAKE
ACCUMULATORS INSTALLATION
1. PLANNING INFORMATION
A. Effectivity
BD-100-1A10 aircraft, Serial No. 20003 to 20395.
All other subsequent BD-100-1A10 aircraft are scheduled for the modification
in production (Ref.: Modification Summary 100T010577).
NOTE: The instructions given in this Service Bulletin are only applicable to
the systems and parts installed at the time of delivery of the aircraft
or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent
action changes to make sure that this bulletin can be completed.
B. Reason
The Brake Accumulator or Emergency/Parking Brake Accumulator’s screw cap
and/or end cap may rupture, in very rare occasions, due to fatigue.  The end
cap and/or screw cap failure can result in a high energy rupture (compressed
nitrogen) and cause system and/or structural damage to the components installed
in the rupture trajectory.
In the current installation, in case of screw cap and/or end cap failure, it is
possible for one system to cause damage to the opposite system which could
make both inoperable.  Although no screw cap and/or end cap failure was
reported on the BD-100-1A10 (CL-300), it is recommended to relocate the
accumulators to prevent such failure.
This Service Bulletin gives instructions to relocate the brake accumulators in an
orientation where the rupture trajectory of any possible end cap and/or screw cap
failure does not affect the opposite hydraulic system.

### Page 4

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 2 of 27
C. Description
This Service Bulletin gives instructions to:
– Remove the aft wing to fuselage fairing,
– Remove the main landing gear (MLG) wheel bin assembly,
– Remove the brake accumulator,
– Remove the emergency/parking brake accumulator,
– Remove the hydraulic brake fuses,
– Remove some hydraulic lines and nitrogen lines as instructed on the
Kit Drawing,
– Remove the support brackets as instructed on the Kit Drawing,
– Install new support brackets,
– Install new hydraulic lines and nitrogen lines,
– Install the emergency/parking brake accumulator,
– Install the brake accumulator,
– Install the hydraulic brake fuses,
– Install the main landing gear (MLG) wheel bin assembly,
– Install the aft wing to fuselage fairing, and
– Do the necessary tests to make sure that the system operates correctly.
D. Compliance
Recommended within 1600 flight hours or by October 2017, whichever comes
first from this Service Bulletin release date (Basic Issue).
E. Approval
The technical content of this Service Bulletin has been approved under
the authority of Transport Canada Civil Aviation (TCCA) Design Approval
Organization (DAO) No. DAO #93-Q-02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the
FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by the
JAA and by EASA in accordance with established procedures.

### Page 5

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 3 of 27
F. Manpower
NOTES: 1. The man-hours given are estimates to help you schedule the tasks
given in this bulletin.  The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to
SB 100-00-02.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3).  The accumulated curing
time is not included in the labor estimates and should be considered
for planning purposes before you schedule this Service Bulletin.
50 man-hours are necessary to do this modification.
The labor required to do this Service Bulletin is at no cost if:
(i) the work is done during new aircraft warranty period, and
(ii) the work is done at Bombardier Business Aviation Services (BBAS)
or Authorized Service Facilities (ASF), and
(iii) this Service Bulletin is scheduled within 1600 flight hours or by
October 2017, whichever comes first from this Service Bulletin
release date (Basic Issue).
G. Material - Cost and Availability
Kit 100K32-20 is necessary to do this modification.
KIT NO. PRICE
100K32-20
Please contact Bombardier
Aerospace Parts Services, in
Montreal, for delivery lead times and
confirmation of prices.
This kit is available at no cost for aircraft in and out of warranty if, a no-charge
purchase order is sent to Bombardier Aerospace within 1600 flight hours or by
October 2017, whichever comes first from this Service Bulletin release date
(Basic Issue)
During or after the above free period, Smart Parts Plus does not pay for the kit.

### Page 6

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 4 of 27
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
20X-00-04 M1-G-KIT Bonding Tester,
Portable
24-00-24 S4933959-501 Tag, Circuit Breaker
29-10-02 DLTFRPSKT3001
see Note
Kit, Deutsch
Permaswage Tool
32C-43-01 G1003240016-025 Brake Bleed, Hose Kit
Commercially Available - Container, Hydraulic
Fluid
Commercially Available - Wrench, Torque
Note: Equivalent Deutsch Permaswage tool kit that contains a -4 and a -6
          swage head may be used .
NOTES: 1. Refer to the BD-100 Illustrated Tool and Equipment Manual (ITEM)
to make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for acceptable GSE
equivalents.
I. Weight and Balance
WEIGHT MOMENT
+0.3 lb. (0.136 kg) +198.19 pound-inches (22.83 kgm)
J. Electrical Load Data
No change.
K. References
– Bombardier Aerospace, Modification Summary, 100T010577, Rev. B
– Bombardier Aerospace, Modification Summary, BB100T010577, Rev. F.
– Bombardier Aerospace, Restriction and/or Special Instruction (RSI),
C-100-000-32-0160, Rev. --.
– Bombardier Aerospace, Kit Drawing K1002910001, Rev. E.
– Bombardier Aerospace, SB 100-00-02, “Service Bulletin Description and Policy”.
– BD-100 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 29, 32, 52 and 53.
– BD-100 Structural Repair Manual (SRM), Chapter 51.
– BD-100 Structural Practices Manual (SPM), Chapter 20

### Page 7

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 5 of 27
L. Other Publications Affected
None.
M. Equivalent Service Bulletin
None.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the BD-100
Aircraft Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from
the BD-100 Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
(1)   Obey all electrical/electronic safety precautions.  Refer to
AMM 24-00-00-910-801.
(2)   Obey all the hydraulic safety precautions.  Refer to AMM 29-00-00-910-801.
(3)   Obey all the hydraulic technical precautions.  Refer to
AMM 29-00-00-910-802.
(4)   Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
LCBP C11 R HYDRAULIC DC PUMP 211
LCBP C15 INBD BRAKES 211
RCBP C11 L HYDRAULIC DC PUMP 212
RCBP C15 OUTBD BRAKES 212
(5)   Open the Aft Equipment-Compartment Door 182 GL.  Refer to
AMM 52-41-00-010-801.
(6)   Remove the Aft Maintenance Access-Panel 182BL.  Refer to
AMM 53-63-17-000-802.
(7)   Remove the Aft Wing-to-Fuselage Fairing panels 182CL and 182CR.
Refer to AMM 53-63-09-000-801.
(8)   Remove the Main Landing Gear (MLG) Wheel-Bin Assembly.  Refer to
AMM 53-32-01-000-801.

### Page 8

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 6 of 27
B. Modification
(1)   Remove the Brake Accumulator, keep the clamps and the washers for later
installation and discard the bolts.  Refer to AMM 32-43-37-000-801.
(2)   Remove the Emergency/Parking Brake Accumulator, keep the clamps and
the washers for later installation and discard the bolts.  Refer to
AMM 32-44-05-000-801.
(3)   Remove all four Brake Hydraulic Fuses.  Refer to AMM 32-43-33-000-801.
(4)   Remove the clamps, the fairleads and the attaching hardware related to the
tube assemblies listed in the next step (Para 2.B.(5)), and keep for later
installation unless otherwise instructed on Sheet 1 of Kit Drawing
K1002910001.
(5)   Remove and discard the tube assemblies identified in the list that follows, as
shown on Sheet 1 of Kit Drawing K1002910001.
– 1005345254-001 tube assembly (qty 3),
– 1005345268-001 tube assembly,
– 1005345272-001 tube assembly,
– 1005345310-001 tube assembly,
– 1005345311-001 tube assembly,
– 1005345312-001 tube assembly,
– 1005345319-001 tube assembly,
– 1005345325-001 tube assembly,
– 1005345332-001 tube assembly,
– 1005345336-001 tube assembly,
– 1005345338-001 tube assembly,
– 1005354131 tube assembly, and
– 1005354133 tube assembly.
NOTE: Some hydraulic fittings may have lockwire that needs to be removed.
Refer to SPM MM 20-50-00-000-801.
(6)   Remove the tube assemblies identified in the list that follows and keep for
later installation:
– 1005345321-003,
– 1005345320-001 or 003 and 1005345318-001,
– 1005345326-001, and
– 1005345327-003 and 1005345331-001.
NOTE:  The tube assemblies are removed for access and can remain on the
aircraft as they are attached to harnesses.

### Page 9

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 7 of 27
(7)   Put protective caps on all the open hydraulic fittings to prevent contamination.
(8)   Remove and discard the following brackets as instructed on sheet 1 view “A”
of Kit Drawing K1002910001 and be very careful not to damage the rivet
holes when you remove them.  Refer to SRM 51-42-08-00:
– Brackets 1005349666 and 1005349667, and bracket s/assy 1005345451,
– Bracket 1005349668 and bracket s/assy 1005349669,
– Bracket 1005349659 and bracket s/assy 1005349658, and
– Brackets 1005349664, 1005349665 and bracket s/assy 1005349703.
NOTE: Take extra care not to damage the holes when you remove the rivets.
(9)   Install the new brackets and brackets sub/assembly for the installation of the
accumulator Part No. 33-155500 as shown on sheet 2 of Kit Drawing
K1002910001 and as follows:
(a) Attach bracket sub/assembly Part No. 1005349658-009 on bracket
Part No. 1005349659-003 with rivets MS20470AD5-6A as shown in
Detail C on Sheet 2 of Kit Drawing K1002910001.
NOTE: Apply faying surface sealant on the mating side of the brackets.
Refer to SRM 51-23-04-00.
(b) Use the existing holes to install the created assembly on the aircraft with
rivets NAS9301E-5-03 as shown in Detail C on Sheet 2 of Kit Drawing
K1002910001.
NOTE: Apply faying surface sealant on the mating side of the brackets.
Refer to SRM 51-23-04-00.
(c) Install a nutplate Part No. MS21059L3 on bracket Part No.
1005349664-009 with rivets Part No. MS20605S3W2 as shown in
Section H – H, Sheet 3 of Kit Drawing K1002910001.  Refer to
SRM 51-42-16-00.
(d) Attach bracket sub/assembly Part No. 1005349703-003 and bracket
Part No. K1002910001-015 on bracket Part No. 1005349664-009
with rivets MS20470AD5-8A as shown in Detail C on Sheet 2 of
Kit Drawing K1002910001.
NOTE: Apply faying surface sealant on the mating side of the brackets.
Refer to SRM 51-23-04-00.

### Page 10

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 8 of 27
(e) Use the existing holes to install the created assembly on the aircraft with
rivets NAS9301E-5-03 and rivets NAS9301E-5-04 as shown in Detail C
and view G on Sheet 2 of Kit Drawing K1002910001.
NOTES: 1 Apply faying surface sealant on the mating side of the
brackets.  Refer to SRM 51-23-04-00.
2 When you install the new assembly, if you have difficulty to
install some of the blind rivets installed through the
bulkhead due to limited access, submit an SRPSA to get
alternate access instructions to install those rivets.
(f) Touch up reworked area per finish code A028.  Refer to
SRM 51-01-04-00.
(10)   Install the new brackets and brackets sub/assembly for the installation of the
accumulator Part No. 33-147500 as shown on Sheet 2 of Kit Drawing
K1002910001 and as follows:
(a) Attach bracket sub/assembly Part No. 1005349669-007 on bracket
Part No. 1005349668-003 with rivets MS20470AD5-6A as shown in
Detail D on Sheet 2 of Kit Drawing K1002910001.
NOTE: Apply faying surface sealant on the mating side of the brackets.
Refer to SRM 51-23-04-00.
(b) Use the existing holes to install the created assembly on the aircraft with
rivets NAS9301E-5-03 and NAS9301E-5-04 as shown in Detail D on
Sheet 2 of Kit Drawing K1002910001.
NOTE: Apply faying surface sealant on the mating side of the brackets.
Refer to SRM 51-23-04-00.
(c) Install a nutplate Part No. MS21059L3 on bracket Part No. 1005349666-
003 with rivets Part No. MS20605S3W2 as shown in Section J – J,
Sheet 3 of Kit Drawing K1002910001.  Refer to SRM 51-42-16-00.
(d) Attach bracket sub/assembly Part No. 1005345451-007 and bracket
Part No. 1005349667-009 on bracket Part No. 1005349666-003 with
rivets MS20470AD5-8A as shown in Detail D on Sheet 2 of Kit Drawing
K1002910001.
NOTE: Apply faying surface sealant on the mating side of the brackets.
Refer to SRM 51-23-04-00.

### Page 11

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 9 of 27
(e) Use the existing holes to install the created assembly on the aircraft with
rivets NAS9301E-5-03 and rivets NAS9301E-5-04 as shown in Detail D
and view H on Sheet 2 of Kit Drawing K1002910001.
NOTES: 1 Apply faying surface sealant on the mating side of the
brackets.  Refer to SRM 51-23-04-00.
2 When you install the new assembly, if you have difficulty to
install some of the blind rivets installed through the
bulkhead due to limited access, submit an SRPSA to get
alternate access instructions to install those rivets.
(f) Touch up reworked area on aluminum parts per finish code A028.
Refer to SRM 51-01-04-00.
(11)   Remove the protective caps from the hydraulic fittings as necessary.
(12)   Install the tube assemblies identified in the list that follows that were
previously removed for access:
– 1005345321-003,
– 1005345320-001 or 003 and 1005345318-001,
– 1005345326-001, and
– 1005345327-003 and 1005345331-001.
(13)   Torque the fittings from 135 to 190 lbf in (15.26 to 21.46 Nm) for -4 lines
and from 17.92 to 23.33 lbf ft (24.30 to 31.63 Nm) for -6 lines.  Refer to
SPM MM 20-22-00-910-801.
(14)   Install the Brake Accumulator with the clamps and the hardware previously
removed.  Refer to AMM 32-43-37-400-801.
(15)   Install the Emergency/Parking Brake Accumulator with the clamps and the
hardware previously removed.  Refer to AMM 32-44-05-400-801.
(16)   Locate and install the tube assemblies and all the related fittings identified
in the list that follows as shown in zone 4-C on Sheet 2 of Kit Drawing
K1002910001.  Refer to SPM MM 20-30-00-910-807 and
SPM MM 20-22-00-910-801.
– 1005345311-005 tube assembly,
– B0301012-06 tee fitting,
– 1005345310-001 tube assembly,
– 1005345312-001 tube assembly,
– B0301014-060604 tee fitting (qty 2),
– 1005345254-001 tube assembly (qty 2),
– 1005345338-001 tube assembly,
– 1005345319-001 tube assembly, and
– B0302126-06 elbow fitting.

### Page 12

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 10 of 27
NOTE: It is not permissible to put stress on the tube assemblies in the
installation process.
(17)   Locate and install the tube assemblies and all the related fittings identified in
the list that follows as shown in zone 2-C on Sheet 2 of Kit Drawing
K1002910001.  Refer to SPM MM 20-30-00-910-807 and
SPM MM 20-22-00-910-801.
– 1005345332-005S tube assembly,
– 1005345336-005 tube assembly,
– B0301014-060604 tee fitting,
– 1005345254-001 tube assembly,
– 1005345325-001 tube assembly,
– B0302126-06 elbow fitting.
NOTE: It is not permissible to put stress on the tube assemblies in the
installation process.
(18)   Locate and install the tube assemblies and all the related fittings identified in the
list that follows as shown in View B on Sheet 2 of Kit Drawing K1002910001:
Refer to SPM MM 20-30-00-910-807 and SPM MM 20-22-00-910-801.
– K1002910001-011 tube assembly and B0302142-04 elbow fitting,
– K1002910001-005 tube assembly and B0302126-04 elbow fitting,
– B0302157-060406 tee fitting assembly,
– 1005345268-001 tube assembly,
– 1005345272-001 tube assembly,
– B0302126-04 elbow fitting, and
– B0302126-06 elbow fitting.
NOTE: It is not permissible to put stress on the tube assemblies in the
installation process.
(19)   Install lockwire, if removed, on hydraulic fittings as necessary.  Refer to
SPM MM 20-50-00-400-801.
(20)   Install the removed clamps and fairleads with the removed hardware as
shown on Sheet 2 of Kit Drawing K1002910001.
(21)   Position connector MPE23P1 so that the harness is parallel (±5 degrees) to
tube assembly Part No. 1005345322, and attach it to the tube assembly with
the new clamps, Part No. M85052/2-6 and M85052/2-8, the new bolt Part No.
NAS6203-3, the new washer Part No. MS21299-3 and the new nut Part No.
MS21043-3 as shown in zone 3-B on Sheet 2 of Kit Drawing K1002910001
and torque the nut from 20 to 25 lbf in (2.26 to 2.82 Nm).  Refer to
SPM MM 20-21-00-910-801.

### Page 13

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 11 of 27
(22)   Position connector MPE24P1 so that the harness is parallel (±5 degrees) to
tube assembly Part No. 1005345328, and attach it to the tube assembly with
the new clamps Part No. M85052/2-6 and M85052/2-8, the new bolt Part No.
NAS6203-3, the new washer Part No. MS21299-3 and the new nut Part No.
MS21043-3, as shown in zone 2-B and 7-A on Sheet 2 of Kit Drawing
K1002910001 and torque the nut from 20 to 25 lbf in (2.26 to 2.82 Nm).
Refer to SPM MM 20-21-00-910-801.
(23)   Install the removed Brake Hydraulic Fuses.  Refer to AMM 32-43-33-400-801.
(24)   Complete the installation of the Brake Accumulator.  Refer to
AMM 32-43-37-400-801.
NOTE: When you pressurize the system for the first time after the
modification, visually inspect all the new swages and fittings for
leaks.  No leaks are permitted.
(25)   Complete the installation of the Emergency/Parking Brake Accumulator.
Refer to AMM 32-44-05-400-801.
NOTE: When you pressurize the system for the first time after the
modification, visually inspect all the new swages and fittings for
leaks.  No leaks are permitted.
(26)   Apply corrosion-inhibiting compound, finish X180 on the new tube assemblies
and fittings.  Refer to SRM 51-01-04-00 and SRM 51-27-08-00.
C. Close-out
(1)   Remove all tools, equipment and unwanted materials from the aircraft.
(2)   Install the Aft Wing-to-Fuselage Fairing panels 182CL and 182CR.  Refer to
AMM 53-63-09-400-801.
(3)   Install the Aft Maintenance Access-Panel 182BL.  Refer to
AMM 53-63-17-400-802.
(4)   Install the Main Landing Gear (MLG) Wheel-Bin Assembly.  Refer to
AMM 53-32-01-400-801.
(5)   Close the Aft Equipment-Compartment Door182 GL.  Refer to
AMM 52-41-00-410-801.
D. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and
send the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback.  Please take a moment to fill out our easy on-line
Service Bulletin survey:
http://csefeedback.aero.bombardier.com

### Page 14

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 12 of 27
3. MATERIAL INFORMATION
A. Kit
Kit 100K32-20 is necessary to do this Service Bulletin and contains the parts that
follow:
NEW
PART NO.
QTY ITEM USED
PART
NO.
INSTRUCTIONS -
DISPOSITION
1005345254-001 3 Tube assembly - -
1005345268-001 1 Tube assembly - -
1005345272-001 1 Tube assembly - -
1005345310-001 1 Tube assembly - -
1005345311-005 1 Tube assembly - -
1005345312-001 1 Tube assembly - -
1005345319-001 1 Tube assembly - -
1005345325-001 1 Tube assembly - -
1005345332-005S 1 Tube assembly - -
1005345336-005 1 Tube assembly - -
1005345338-001 1 Tube assembly - -
1005345451-007 1 Bracket Sub-
Assembly
- -
1005349658-009 1 Bracket Sub-
Assembly
- -
1005349659-003 1 Bracket - -
1005349664-009 1 Bracket - -
1005349666-003 1 Bracket - -
1005349667-009 1 Bracket Sub-
Assembly
- -
1005349668-003 1 Bracket - -
1005349669-007 1 Bracket Sub-
Assembly
- -
1005349703-003 1 Bracket Sub-
Assembly
- -
B0301012-06 1 Tee Fitting - -
B0301014-060604 3 Tee Fitting - -
B0302126-04 2 Elbow Fitting - -
B0302126-06 3 Elbow Fitting - -
B0302142-04 1 Elbow Fitting - -

### Page 15

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 13 of 27
NEW
PART NO.
QTY ITEM USED
PART
NO.
INSTRUCTIONS -
DISPOSITION
B0302157-060406 1 Tee, Fitting - -
K1002910001-005 1 Tube assembly - -
K1002910001-011 1 Tube assembly - -
K1002910001-015 1 Bracket - M/F
1005349665-015
MS20470AD5-6A 20 Rivet - -
MS20470AD5-8A 20 Rivet - -
MS20605S3W2 5 Rivet, Blind - -
MS21043-3 2 Nut - -
MS21059L3 2 Nut Plate - -
MS21299-3 6 Washer - -
M85052/2-6 2 Clamp - -
M85052/2-8 2 Clamp - -
NAS6203-3 2 Bolt - -
NAS6203-8 4 Bolt - -
NAS6203-10 4 Bolt - -
NAS9301E-5-03 20 Rivet, Blind - -
NAS9301E-5-04 20 Rivet, Blind - -
NOTES: 1. In case of discrepancy between this list and the “Service Bulletin Kit
Parts List” contained in the respective kit, then the latter list prevails.
2. The actual quantity for some of the hardware contained in the kit
can be greater than the amount shown in the table as these items
are supplied in prepackaged quantities.
B. Parts
No parts required.

### Page 16

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 14 of 27
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier.  Bombardier Aerospace does not
pay for these consumables.
DESCRIPTION PART
No./NAME
SPECIFICATION QUANTITY SUPPLIER
(See Note)
Compound,
Sealing
ct:
B1/2 = 30 hours
B2 = 48 hours
B4 = 84 hours
Pro Seal 870
Class B
MIL-PRF-81733
Type II Class 1,
Grade A
As
Necessary Code: A
Compound,
Sealing
ct:
C48 = 56 days
Pro Seal 870
Class C
MIL-PRF-81733
Type IV, C-48
As
Necessary Code: A
Fluid
Resistant,
Epoxy Primer
- CMS565-01 As
Necessary
Code: B
RTV Silicone
Noncorrosive
Dow Corning
RTV 3145
MIL-A-46146
Gr II
As
Necessary
Code: C
Tape, PTFE
Sealant
- AMS 3255
Class 2, 1.00 in
(2.54 mm)
As
Necessary
Code: D
Organic
Corrosion
Inhibiting
Compound
Corban 35 BAMS565-006 As
Necessary
Code: E
Alcohol,
Isopropyl - - AsNecessary Code: F
Cloth,
Lint Free - - - Code: F
Lockwire MS20995C20 CRES 0.020 in(0.51 mm) AsNecessary Code: F
Scraper,
Nonmetalic
- - - Code: F
NOTES: 1. Refer to the table that follows for each supplier’s address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.

### Page 17

MODEL BD-100-1A10 (CL-300)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 15 of 27
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate.  In the event that this information
has changed, the operator is encouraged to use the World Wide
Web to find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
PRC-Desoto International
P.O. Box 1800
5454 San Fernando Road
Glendale, CA 91209
U.S.A.
Tel.:  (905) 629-7999
Web site: www.prc-desoto.com
Code: B
Akzo Nobel Aerospace Coatings
1 E. Water Street
Waukegan, IL, 60085-5635
U.S.A.
Tel.: (847) 625-3200
web site: www.akzonobel.com
Code: C
Dow Corning Corporation
Corporate Center
P.O. Box 994
Midland, MI, 48686-0994
U.S.A.
Tel.:  (989) 496-7875
Web  site: www.dowcorning.com
Code: D
W.L. Gore & Associates Inc.
555 Papermill Rd
Newark, DE, 19711
U.S.A.
Tel.: (410) 506-7787
Web site: www.gore.com
Code: E
Zip-Chem Products Inc.
400 Jarvis Dr.,
Morgan Hill, CA 95037-8106
U.S.A.
Tel.: (408) 782-2335
Web site: www.zipchem.com
Code: F
Commercially Available
D. Publications
No publications required.

### Page 18

MODEL BD-100-1A10 (CL-300)
PL K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 1 of 6, Rev. E)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 16 of 27
SB100-32-043-10001-E-S -S1-PL

### Page 19

MODEL BD-100-1A10 (CL-300)
PL K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 2 of 6, Rev. E)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 17 of 27
SB100-32-043-10001-E-S -S2-PL

### Page 20

MODEL BD-100-1A10 (CL-300)
PL K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 3 of 6, Rev. E)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 18 of 27
SB100-32-043-10001-E-S -S3-PL

### Page 21

MODEL BD-100-1A10 (CL-300)
PL K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 4 of 6, Rev. E)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 19 of 27
SB100-32-043-10001-E-S -S4-PL

### Page 22

MODEL BD-100-1A10 (CL-300)
PL K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 5 of 6, Rev. E)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 20 of 27
SB100-32-043-10001-E-S -S5-PL

### Page 23

MODEL BD-100-1A10 (CL-300)
PL K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 6 of 6, Rev. E)
Basic Issue: Feb 25/2013 100-32-20Revision 02: Apr 14/2015 Page 21 of 27
SB100-32-043-10001-E-S -S6-PL

### Page 24

K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 1 of 3, Rev. E)
Basic Issue: Feb 25/2013
Revision 02: Apr 14/2015
100-32-20Page 22 of 27
SB100-32-043-10001-E-S1-1

### Page 25

K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 1 of 3, Rev. E - continued)
Basic Issue: Feb 25/2013
Revision 02: Apr 14/2015
100-32-20Page 23 of 27
SB100-32-043-10001-E-S1-2

### Page 26

K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 2 of 3, Rev. E)
Basic Issue: Feb 25/2013
Revision 02: Apr 14/2015
100-32-20Page 24 of 27
SB100-32-043-10001-E-S2-1

### Page 27

K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 2 of 3, Rev. E - continued)
Basic Issue: Feb 25/2013
Revision 02: Apr 14/2015
100-32-20Page 25 of 27
SB100-32-043-10001-E-S2-2

### Page 28

K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 3 of 3, Rev. E)
Basic Issue: Feb 25/2013
Revision 02: Apr 14/2015
100-32-20Page 26 of 27
SB100-32-043-10001-E-S3-1

### Page 29

K1002910001 – Kit – Brake accumulator Relocation, No. 1 & 2 Systems
(Sheet 3 of 3, Rev. E - continued)
Basic Issue: Feb 25/2013
Revision 02: Apr 14/2015
100-32-20Page 27 of 27
SB100-32-043-10001-E-S3-2

### Page 30

SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: 100-32-20 ISSUE: Rev. 02 DATED: Apr 14/2015
TITLE: Modification – Brake Control System – Modification of the Brake Accumulators
Installation
In an effort to improve the quality of our technical communications, we are replacing
the standard Service Bulletin Evaluation Form with an on-line Service Bulletin
Survey and we are requesting your feedback.  Please take a moment to fill out our
easy on-line Service Bulletin survey:
http://csefeedback.aero.bombardier.com

### Page 31

SERVICE BULLETIN INCORPORATION SHEET – “100-32-20”BOMBARDIER
SUBMISSION Upon completion of the Service Bulletin, please fill-in, fax to
(514) 855-8798 or e-mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier.  If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
     COMPLIED WITH
Service Bulletin
Number
Rev. * Parts
Completed
YES NO N/A Remarks/Reason
100-32-20 02 -
- - -
- - -
Actual hours to accomplish Service Bulletin:
* NOTES: 1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should be
reported.
Aircraft Serial No.  Aircraft Reg. No.
Airframe Hours:  Airframe Landings
S.B. Incorporation date  Service Order No.
(dd/mm/yy)
Facility Incorporating S.B.
Name Signature Date
                          (dd/mm/yy)Signature not required if sent by E-Mail

### Page 32

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Bombardier Business Aircraft Customer Services (BBACS)
P.O. Box 6087, Station Centre-ville
Montreal, Québec, Canada H3C 3G9
Attention: Customer Support Department, Maintenance Engineering
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
