# Bombardier Service Bulletin 100-32-31

Copy: Revision 03 ("100-32-31_R03"), 27 pages: PDF https://openairdocs.org/files/sha256/ed/f1/edf1ae28fb25a030d11afb87586235823b079af3905ea7bc1444022b19c9a570; text https://openairdocs.org/service-documents/bombardier/sb-100-32-31/file/edf1ae28fb25.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0792; AD 2019-03-29 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-32-31
- Latest revision known: 100-32-31, Revision 03, dated March 27, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-32-31

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-03-29](https://openairdocs.org/ad/2019-03-29.md), effective Jun 6, 2019: Revisions 01, 02 and 03

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-100-32-31/proposed.md).

## Text (27 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0792; AD 2019-03-29 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Apr 10/2018 100-32-31 
 Page 1 of 1 
SERVICE BULLETIN INFORMATION SHEET 
MODEL BD-100-1A10 (CH-300) 
ATA 32-51 
LANDING GEAR 
MODIFICATION – NOSE WHEEL STEERING CONTROL SYSTEM –  
ADDITION OF A FILTER IN THE NOSE WHEEL STEERING HYDRAULIC SYSTEM 
 
Service Bulletin No.: 100-32-31 Issue: Rev. 03 Dated: Mar 27 /2018
The following data is supplied for information only.  No revision to the Service Bulletin 
is necessary. 
Keep this Information Sheet with subject Service Bulletin. 
This Information Sheet is issued to inform the operators that Transport Canada 
Airworthiness Directive CF-2018-11 is now released and effective as of April 19, 2018. 
For aircraft that have incorporated this Service Bulletin at Revision Basic, Revision 01 
or Revision 02, make sure you comply with the Retroactive Action as per the AD Time 
Compliance.

### Page 2

Discard the Revision 02 of this Service Bulletin dated Mar 14/2018 and the Information
Sheet dated Mar 15/2018 and replace in its entirety with this Revision 03.
Service Bulletin No. 100−32−31
Date of Basic Issue Jan 04/2018
Revision No. 01 Dated Jan 23/2018
Revision No. 02 Dated Mar 14/2018
Revision No. 03 Dated Mar 27/2018
For action applicable to aircraft on which the Basic Issue, Revision 01 or Revision 02
of this Service Bulletin was done, refer to the retroactive action box on Page 1 of this
Service Bulletin.
This revision is issued to:
1. Revise, in Page 1, the retroactive action.
2. Revise, in Paragraph 2.B.(5)(w), the instructions and the torque values.
3. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL BD−100−1A10 (CH−300)
100−32−31
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 3

MODIFICATION - NOSEWHEEL-STEERING CONTROL SYSTEM -
ADDITION OF A FILTER IN THE NOSEWHEEL STEERING HYDRAULIC SYSTEM
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 60 months or 2000 flight
cycles, whichever comes first
from Service Bulletin release
date (Basic Issue)
EFFECTIVITY: A/C Serial No. 20003 to 20500
MANPOWER: 25 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make
it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 32−51
LANDING GEAR
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 1 of 1
This Service Bulletin is available at:

### Page 4

MODIFICATION - NOSEWHEEL-STEERING CONTROL SYSTEM -
ADDITION OF A FILTER IN THE NOSEWHEEL STEERING HYDRAULIC SYSTEM
RETROACTIVE ACTION
THE ACTION THAT FOLLOWS IS RECOMMENDED FOR AIRCRAFT ON WHICH
THE BASIC ISSUE, REVISION 01 OR REVISION 02 OF THIS SERVICE BULLETIN
WAS DONE:
Torque the fittings on tube assembly, Part No. K1000070395−401, as follows:
− for the fitting on the pressure filter manifold, 17.92 to 23.33 lb ft (24.30 to
31.63 Nm), and
− for the fitting on the priority valve, 39.17 to 45.83 lb ft (53.11 to 62.13 Nm).
Refer to SPM−MM 20−22−00−910−801.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−100−1A10 (CH−300)
ATA 32−51
LANDING GEAR
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2018 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 1 of 22
This Service Bulletin is available at:

### Page 5

1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. Please contact your
Regional Manager (RM), Field Service Representative (FSR) or Customer
Service Representative (CSR) to schedule your aircraft as there is a
limited availability. The parts will be allocated on a first come first serve
basis.
For more information on dedicated schedules, refer to SB 100−00−02.
A. Effectivity
BD−100−1A10 aircraft, Serial No. 20003 to 20500.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action
changes to make sure that this bulletin can be completed.
B. Reason
In the LH hydraulic system, a direct line that runs between the LH DCMP and the
Steering Selector Valve (SSV), supplies unfiltered hydraulic fluid to the NoseWheel
Steering (NWS) system. Contaminated hydraulic fluid may cause the SSV to be
blocked in the open position, which will leave the NWS system unprotected should
the SCU require the SSV to shut−down in case of detection of NWS failure.
This Service Bulletin introduces a modification that installs a hydraulic filter into the
hydraulic line between the DCMP and the SSV, on the LH hydraulic system. This
will eliminate the risk of contaminated fluid reaching the SSV. The benefits to the
operator are improved reliability and reduced maintenance costs.
C. Description
This Service Bulletin gives instructions to:
− Open the aft equipment−compartment door,
− Get access to the left hydraulic system,
− Remove some hydraulic tube assembly,
− Install new support structure for a new hydraulic filter,
− Install a new hydraulic filter,
− Install new hydraulic tube assembly, and
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 2 of 22

### Page 6

− Do the necessary tests to make sure that the system operates correctly.
D. Compliance
Recommended within 60 months or 2000 flight cycles, whichever comes first from
this Service Bulletin release date (Basic Issue).
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the aircraft configuration, submit an SRPSA for analysis and to
get an approved disposition to complete this Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTES: 1. The man−hours given are to help you schedule the tasks given in this
bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to SB
100−00−02.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the man−hours and should be considered for
planning purposes before you schedule this Service Bulletin.
25 man−hours are necessary to do this modification.
The labor required to do this Service Bulletin is at no cost if:
− the work is done during new aircraft warranty period, and
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled in less than 60 months from its release date
(Basic Issue).
G. Material − Cost and Availability
Kit 100K32−31 is necessary to do this modification.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 3 of 22

### Page 7

KIT NO. PRICE
100K32−31
Please contact Bombardier Aerospace
Parts Services, in Montreal, for delivery
lead times and confirmation of prices.
This kit is available at no cost if:
− ordered during new aircraft warranty period, and
− a no−charge purchase order is sent to Bombardier Aerospace in less than 60
months, from this Service Bulletin release date (Basic Issue).
This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are
used to reserve and manage inventory due to limited availability of rotable stock,
parts and/or kits. Parts are limited, therefore, advance part scheduling with our
In−Service Implementation Team (ISIT) is recommended prior to a maintenance
visit. Please contact your Regional Manager (RM), Field Service Representative
(FSR) or Customer Service Representative (CSR) to schedule your aircraft as there
is a limited availability. The parts will be allocated on a first come first serve basis.
For more information on dedicated schedules, refer to SB 100−00−02.
For all parts transactions, Bombardier Aerospace’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply. These
terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com
For those aircraft in new aircraft warranty at the time of Service Bulletin distribution,
Smart Parts Plus does not pay for the kit at any time.
For those aircraft out of new aircraft warranty at the time of Service Bulletin
distribution, Smart Parts Plus pays for the kit for up to one year from the Service
Bulletin distribution date (Basic Issue).
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
20X−00−04 M1−G−KIT Bonding Tester, Portable
24−00−24 S4933959−501 Tag, Circuit Breaker
29−10−02 DLTFRPSKT3001 Kit, DeutschPermaswage Tool
Commercially Available − Container, HydraulicFluid
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 4 of 22

### Page 8

GSE REFERENCE NO. PART NO. DESCRIPTION
Commercially Available − Wrench, Torque
Commercially Available G470B Gun, Cherry Max
Commercially Available H753A−456 Pulling Head, RightAngle
NOTES: 1. Refer to the CH 300 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for acceptable GSE
equivalents.
I. Weight and Balance
WEIGHT MOMENT
+2.6 pounds (+1.18 kg) +1808.40 pound−inches (+20.670kg−m)
J. Electrical Load Data
No change.
K. References
− Bombardier Aerospace, Modification Summary, BB100T010888, Rev. E.
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI),
C−100−000−32−0169, Rev. B.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
− Bombardier Aerospace, Kit Drawing K1000070394, Rev. A.
− Bombardier Aerospace, SB 100−00−02, Service Bulletin Description and Policy.
− CH 300 Aircraft Maintenance Manual (AMM), Chapters 6, 12, 24, 29, 32 and 52.
− CH 300 Illustrated Tool and Equipment Manual (ITEM) Chapters 20, 24 and 29.
− CH 300 Structural Repair Manual (SRM), Chapter 51.
L. Other Publications Affected
CH 300 Aircraft Illustrated Parts Catalog (AIPC), Chapter 29.
M. Equivalent Service Bulletin
For the Challenger 350 aircraft, use SB 350−32−007.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 5 of 22

### Page 9

2. ACCOMPLISHMENT INSTRUCTIONS
NOTE: All references made to zones, access panels and/or doors, are from the
CH 300 AMM, Chapter 6.
A. Aircraft Setup
NOTE: The steps in the Aircraft Set−Up section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator discretion.
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all the hydraulic safety precautions. Refer to AMM 29−00−00−910−801.
(3) Obey all the hydraulic technical precautions. Refer to
AMM 29−00−00−910−802.
(4) Open and tag the circuit breaker that follows:
CB PANEL CB NO. NAME ZONE
RCBP C11 L HYDRAULIC DC PUMP 212
(5) Release the hydraulic pressure from the LEFT hydraulic system. Refer to
AMM 29−10−00−862−802.
(6) Open the Aft Equipment−Compartment door 182GL. Refer to
AMM 52−41−00−010−801.
(7) Remove the Pack Discharge Duct. Refer to AMM  21−52−41−000−801.
B. Modification
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
(1) Locate the new support structure for the new filter as follows:
NOTE: For all the steps that follows, refer to Kit Drawing K1000070394.
(a) Make sure that the DCMP bracket assembly, Part No. 100534422, is
properly supported to prevent any movement, per best shop practices.
(b) For aircrafts Serial No. 20003 to 20406 locate intercostal, Part No.
K1000070396−801, as shown in the "Bracket Installation" view and
section E−E. for aircrafts 20003 to 20406 (PRE & POST SB 100−29−18).
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 6 of 22

### Page 10

(c) For aircrafts Serial No. 20407 to 20500, locate intercostal, Part No.
K1000070396−401, as shown in the "Bracket Installation" view and
section E−E for aircrafts 20407 and subs.
NOTE: Intercostal, Part No. K1000070396−401 is made from Intercostal,
Part No. K1000070396−801. Refer to Figure 1 for trim detail.
Trim intercostal K1000070396−801 as shown in Figure 1.
Finish bare metal per Finish Code A032. Refer to
SRM 51−01−04.
Identify trimmed intercostal as K1000070396−401 with
permanent ink per best shop practices.
(d) Drill the holes through stringer 14 L and intercostal, Part No.
K1000070396−401 or K1000070396−801, and temporarily attach in place
per best shop practices. Make sure to maintain a minimum 2 D edge
distance and 4 D pitch in the intercostal. Refer to SRM 51−40−04.
(e) Locate clip, Part No. K1000070396−501, on stringer 15L. Refer to the
"Bracket Installation" view, and section C−C.
(f) Drill two pilot holes through stringer 15L. SRM 51−40−04.
(g) Temporarily attach in place per best shop practices.
(h) Remove the two rivets MS20470AD4, common to the intercostal, Part No.
1005354425, and the clip, Part No. 1005354429 as shown in zone 2B.
(i) Locate the filter mount lower bracket, Part No. K1000070396−301, as
shown in the "Bracket Installation" view and in section D−D.
(j) Transfer drill the two existing holes from the clip, Part No. 1005354429
and intercostal, Part No. 1005354425, through the lower bracket, Part No.
K1000070396−301. Refer to SRM 51−40−04.
(k) Transfer drill the two pilot holes from the clip, Part No. K1000070396−501,
through the intercostal, Part No. K1000070396−401, and lower bracket,
Part No. K1000070396−301. Make sure you maintain a minimum 2 D
edge distance in the intercostal, and in the lower bracket. Refer to Section
C−C and SRM 51−40−04.
(l) Temporarily attach in place per best shop practices.
(m) Locate the filter mounting plate assembly, Part No. K1000070396−101, on
the lower bracket, Part No. K1000070396−301. Refer to the "Bracket
Installation" view, section D−D and Detail F for location references.
(n) Drill the four pilot holes from the filter mounting plate assembly, Part No.
K1000070396−101, through the lower bracket, Part No.
K1000070396−301. Refer to section D−D and SRM 51−40−04.
(o) Temporarily attach in place per best shop practices.
(p) Locate the upper bracket, Part No. K1000070396−201, on the intercostals,
Part No. K1000070396−401 and 1005354425, and under the filter
mounting plate assembly, Part No. K1000070396−101, as shown in the
"Bracket Installation" view and section E−E.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 7 of 22

### Page 11

(q) Drill the five pilot holes from the filter mounting plate assembly, Part No.
K1000070396−101, through the upper bracket, Part No.
K1000070396−201. Refer to section E−E, and SRM 51−40−04.
(r) Temporarily attach in place per best shop practices.
(s) Open all the fastener holes to the appropriate size as necessary. Refer to
the "Bracket Installation" view and section D−D and E−E, for fasteners call
out. Refer to SRM 51−40−04.
(t) Dismantle and deburr all the parts.
NOTE: Make sure that the DCMP bracket assembly, Part No.
1005354422, remains properly supported.
(2) Install the support structure for the new filter as follows:
(a) Install the filter mounting plate assembly, Part No. K1000070396−101, on
the filter mount lower bracket, Part No. K1000070396−301, and upper
bracket, Part No. K1000070396−201. Refer to Section D−D and E−E, for
fastener call out and to SRM 51−42−08.
(b) Install the the clip, Part No. K1000070396−501, on stringer 15L. Refer to
section D−D for fastener call out and SRM 51−42−08.
(c) Install the filter mounting plate, Part No. K1000070396−101, with the lower
bracket, Part No. K1000070396−301, and upper bracket, Part No.
K1000070396−201, attached to it, on the intercostal, Part No.
K1000070396−401. Refer to the "Bracket Installation" view, for fastener
call out and SRM 51−42−08.
(d) Install the fasteners common to the intercostal, Part No.
K1000070394−401 or −801, and stringer 14L. Refer to section E−E, and
SRM 51−42−20.
(e) Install the fasteners common to the upper bracket, Part No.
K1000070396−201, and the intercostal 1005354425. Refer to the "Bracket
Installation" view, for fasteners call out and SRM 51−42−20.
(f) Install the fasteners common to the lower bracket, Part No.
K1000070396−301, the intercostals and the clips. Refer to the "Bracket
Installation" view, for fastener call out and SRM 51−42−20.
(g) Locate and install the pipe support bracket assembly, Part No.
K1000070396−601, on case drain filter bracket assembly, Part No.
1005354444 at FS 688.45. Refer to section A−A, and SRM 51−42−20.
(h) Touch up reworked areas, if required, per finish code A032. Refer to
SRM 51−01−04.
NOTE: Topcoat color, White Gloss #17875. Refer to SRM 51−01−08.
(i) Touch up all fasteners topcoat color White Gloss # 17875. Refer to
SRM 51−01−08.
(3) Put the hydraulic fluid container below the work area.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 8 of 22

### Page 12

(4) Remove and discard existing tube assemblies as follows:
(a) Remove and discard tube assembly, Part No. 1005354140. Refer to the
"Pre−Mod" view, zone 2B.
(b) Put protection caps on the fittings to prevent contamination.
(c) Remove and discard tube assemblies, Part No. 1005354124 and
1005354123. Refer to the "Pre−Mod Looking Aft" view, zone 3C.
NOTES: 1. Remove and discard the lower clamp, Part No. M85052/2−4
and install again the attaching hardware. Refer to Detail G.
2. Remove the upper clamp, Part No. M85052/2−4 and keep
with the attaching hardware for installation of the new tube.
Refer to the "Pre−Mod Looking Aft" view, zone 3.C.
CAUTION: DO NOT CUT TUBING WITH A SAW. THIS CAN CAUSE
LOOSE CHIPS TO GO INTO THE TUBING AND CAUSE
CONTAMINATION OF THE SYSTEM.
(d) Cut tube assembly, Part No. 1005354125 at the location shown in
Detail G, and discard the upper section attached to the tee connector.
Refer to SPM−MM 20−22−00−910−805.
NOTE: Identify the section of the tube assembly that is kept as
K1000070394−101, per best shop practices.
(e) Put protection caps on the fittings and the cut portion of tube assembly,
Part No. 1005354125 to prevent contamination.
(5) Install the new hydraulic filter and tube assemblies as follows:
(a) Install the new hydraulic filter, Part No. 945170−3, with the bolts, Part No.
NAS6204−32, and washers, Part No. NAS1149D0432J on the filter
mounting plate assembly. Refer to section B−B.
NOTE: Apply a small bead of sealant on the mating surface of the filter.
Refer to section B−B and SPM−MM 51−23−00−02
(b) Torque the bolts, 50 to 70 lbf in (5.65 to 7.90 Nm). Refer to
SPM−MM 20−21−00−910−801.
(c) Do the electrical bonding test of the filter. Refer to
SPM−MM 51−80−00−760−801.
(d) Apply sealant on the head of bolts. Refer to
SPM−MM 51−23−00−390−810.
(e) Apply humiseal on the nut plates and the threaded part of the bolts. Refer
to section B−B, and SPM−MM 51−80−00−390−801.
(f) Install elbow assembly, Part No. B0302126−04, hand tight, on the "IN"
fitting of the new filter. Refer to the "Filter Inst" view, zone 8B.
(g) Install elbow assembly, Part No. B0302161−0604, hand tight, on tee
connector at FS 688.45. Refer to zone 6A.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 9 of 22

### Page 13

(h) Install tube assembly, Part No. K1000070395−101, between the two
elbow assemblies.
NOTE: It is permissible to cut the tube assembly to suit installation. Refer
to SPM−MM 20−30−00−910−807.
(i) Swage both elbow assembly to finalize installation. Refer to
SPM−MM 20−30−00−910−807.
(j) Torque the fittings on tube assembly, Part No. K1000070395−101, 135 to
190 lb in (15.26 to 21.46 Nm). Refer to SPM−MM 20−22−00−910−801.
(k) Attach tube assembly, Part No. K1000070395−101, with clamp, Part No.
M85052/2−4, bolt Part No. NA6203−1 and washer Part No.
NAS1149D0316J on pipe support bracket assembly, Part No.
K1000070396−601, at FS688.45. Refer to zone 6A.
(l) Torque the bolt, Part No. NAS6203−1, 20 to 25 lb in (2.26 to 2.82 Nm).
Refer to SPM−MM 20−21−00−910−801.
(m) Install tube assembly, Part No. K1000070395−201, on the "OUT" fitting of
the new filter, tube assembly, Part No. 1005354123−001, and tube
assembly, Part No. K1000070395−301. Refer to the "Filter Inst" view,
zone 7B, 8B, and Detail F.
(n) Install union fitting, Part No. B0301010−04 between tube assembly, Part
No. K1000070395−301, and tube assembly, Part No. K1000070394−101.
(o) Install tee connector, Part No. B0301012−04, between tube assemblies,
Part No. K1000070395−201, K1000070395−301, and 1005354123−001.
NOTE: It is permissible to cut the tube assemblies to suit installation.
Refer to SPM−MM 20−30−00−910−807.
(p) Swage all the fittings to finalize the installation. Refer to
SPM−MM 20−30−00−910−807.
(q) Torque the fittings on tube assemblies, 135 to 190 lb in (15.26 to
21.46 Nm). Refer to SPM−MM 20−22−00−910−801.
(r) Install on tube assembly, Part No. 1005354123−001, the previously
removed clamp, Part No. M85052/2−4, bolt, Part No. NAS6203−22 and
washer, Part No. NAS1149D0332J. Refer to zone 6B.
(s) Torque the bolt, Part No. NAS6203−22, 20 to 25 lb in (2.26 to 2.82 Nm).
Refer to SPM−MM 20−21−00−910−801.
(t) Install tube assembly, Part No. K1000070395−401, between the pressure
filter manifold and the priority valve.
(u) Install elbow assembly, Part No. B0302161−0806 on priority valve and
tube assembly, Part No. K1000070395−401.
NOTE: It is permissible to cut the tube assembly to suit installation. Refer
to SPM−MM 20−30−00−910−807.
(v) Swage the elbow assembly to finalize the installation. Refer to
SPM−MM 20−30−00−910−807.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 10 of 22

### Page 14

(w) Torque the fittings on tube assembly, Part No. K1000070395−401, as
follows:
− for the fitting on the pressure filter manifold, 17.92 to 23.33 lb ft (24.30
to 31.63 Nm), and
− for the fitting on the priority valve, 39.17 to 45.83 lb ft (53.11 to
62.13 Nm).
Refer to SPM−MM 20−22−00−910−801.
C. Testing
(1) Remove the tags and close the circuit breaker that follows:
CB PANEL CB NO. NAME ZONE
RCBP C11 L HYDRAULIC DC PUMP 212
(2) Use the L DCMP to pressurize the LEFT hydraulic system. Refer to
AMM 29−10−00−862−801.
NOTE: The LEFT DCMP must be used to make sure that the new filter and
hydraulic lines are bled and pressurized.
(3) Make sure there is no hydraulic fluid leakage from the new filter, tube
assemblies and fittings that were installed by this Service Bulletin.
(4) Operate the nosewheel steering through 10 full cycles. Refer to
AMM 32−51−00−710−801.
(5) Release the hydraulic pressure from the LEFT hydraulic system. Refer to
AMM 29−10−00−862−802.
(6) Clean any hydraulic fluid leakage from the work area if necessary. Refer to
SPM−MM 51−25−00−110−801.
(7) Do the servicing of the left hydraulic system reservoir. Refer to
AMM 12−12−00−611−801.
D. Close−out
NOTE: The steps in the Close−out section of this Service Bulletin, except for the
return−to−service tests, are recommended steps. The steps give a
recommendation to install components removed during the Aircraft
Set−Up. This recommendation is to make sure that the aircraft is safe and
ready to return to service. Alternative steps can be used at the operator
discretion.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Install the Pack Discharge Duct. Refer to AMM  21−52−41−400−801.
(3) Close the Aft Equipment−Compartment door 182GL. Refer to
AMM 52−41−00−410−801.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 11 of 22

### Page 15

E. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback. Please take a moment to fill out our easy on−line Service
Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
Kit 100K32−31 is necessary to do this Service Bulletin and contains the parts that
follow:
NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
1005354123−001 1 TubeAssembly − −
945170−3 1 HydraulicFilter − −
B0301010−04 1 Union Fitting − −
B0301012−04 1 Tee Fitting − −
B0302126−04 1 ElbowAssembly − −
B0302161−0604 1 ElbowAssembly − −
B0302161−0806 1 ElbowAssembly − −
K1000070395−101 1 TubeAssembly − −
K1000070395−201 1 TubeAssembly − −
K1000070395−301 1 TubeAssembly − −
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 12 of 22

### Page 16

NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
K1000070395−401 1 TubeAssembly − −
K1000070396−101 1
Mounting
Plate
Assembly
− −
K1000070396−201 1 UpperBracket − −
K1000070396−301 1 LowerBracket − −
K1000070396−401
or
K1000070396−801
See Note 3
1 Intercostal − −
K1000070396−501 1 Clip − −
K1000070396−601 1 Pipe SupportBracket − −
M85052/2−4 1 Clamp − −
MS20470AD4−5 10 Rivet Solid − −
MS20470AD5−6 5 Rivet Solid − −
MS9068−345
or
AS3582−345
4 O−Ring − −
NAS1149D0316J 2 Washer − −
NAS1149D0432J 7 Washer − −
NAS6203−1 1 Bolt − −
NAS6204−32 3 Bolt − −
NAS9301E−4−02 4 Rivet Blind − −
NAS9301E−4−03 5 Rivet Blind − −
NAS9301E−5−02 5 Rivet Blind − −
NAS9301E−5−03 5 Rivet Blind − −
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 13 of 22

### Page 17

NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
NSA8206−243
or
NAS1611−243A
or
A0250101−16
1 Seal − −
NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit
Parts List contained in the respective kit, then the later list prevails.
2. The actual quantity for some of the hardware contained in the kit can
be greater than the amount shown in the table as these items are
supplied in prepackaged quantities.
3. Intercostal K1000070396−401, made from K1000070396−801.
B. Parts
No parts required.
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aerospace does not pay
for these consumables.
DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY
SUPPLIER
(SEE
NOTE)
Alodine 1000 L − − As Necessary Code: A
Compound
Sealing
CT:
B1/2=30 hours
B2=48 hours
B4=72 hours
Pro Seal 870
Class B
MIL−S−81733
Type I or Type II As Necessary Code: B
Humiseal
1B15 − − As Necessary Code: C
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 14 of 22

### Page 18

DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY
SUPPLIER
(SEE
NOTE)
Polyurethane
Topcoat
White Gloss
#17875 (Ref
Fed Std 595)
BAMS 565−002 As Necessary Code: D
NOTES: 1. Refer to the table that follows for each suppliers address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Henkel Corp.
One Henkel Way
Rocky Hill, CT 06067
U.S.A.
Tel.: 1−860−571−5100
www.henkel−northamerica.com
Code: B
PRC−Desoto International
5676 Timberlea Blvd.
Mississauga, Ontario
Canada, L4W 4M6
Tel.: (905) 629−7999
www.ppgaerospace.com
Code: C
Chase Corporation
Chase Global Operations
295 University Avenue,
Westwood, MA 02090
U.S.A.
Tel.: +1 781−332−0772
Toll Free (US only): 800−323−4182
www.humiseal.com
Code: D
Tempo Paint and Varnish Co.
205 Fenmar Dr.
Weston, Ontario
Canada, M9L 2X4
Tel.: (416) 746−2233
www.tempo−aerospace.com
D. Publications
No publications required.
MODEL BD−100−1A10 (CH−300)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 15 of 22

### Page 19

CSB3231_001
K1000070396−401
INTERCOSTAL, FILTER MOUNT
M/F K1000070396−801
TRIM FLANGE
MODEL BD−100−1A10 (CH−300)
Intercostal Trim Detail
FIGURE 1
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 16 of 22

### Page 20

K1000070394−A−S1−PL
MODEL BD−100−1A10 (CH−300)
PL K1000070394 − Kit−Filter Inst. NWS Hydraulic System
(Sheet 1 of 3, Rev. A)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 17 of 22

### Page 21

K1000070394−A−S2−PL
MODEL BD−100−1A10 (CH−300)
PL K1000070394 − Kit−Filter Inst. NWS Hydraulic System
(Sheet 2 of 3, Rev. A)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 18 of 22

### Page 22

K1000070394−A−S3−PL 
MODEL BD−100−1A10 (CH−300)
PL K1000070394 − Kit−Filter Inst. NWS Hydraulic System
(Sheet 3 of 3, Rev. A)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 19 of 22

### Page 23

K1000070394−A−1 
K1000070394 − Kit−Filter Inst. NWS Hydraulic System
(Sheet 1 of 1, Rev. A)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 20 of 22

### Page 24

K1000070394−A−2 
K1000070394 − Kit−Filter Inst. NWS Hydraulic System
(Sheet 1 of 1, Continued, Rev. A)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 21 of 22

### Page 25

K1000070394−A−3 
K1000070394 − Kit−Filter Inst. NWS Hydraulic System
(Sheet 1 of 1, Continued, Rev. A)
Basic Issue: Jan 04/2018
Revision 03: Mar 27/2018
100−32−31
Page 22 of 22

### Page 26

100−32−31 Rev. 03 Mar 27/2018
MODIFICATION − NOSEWHEEL−STEERING CONTROL SYSTEM −
ADDITION OF A FILTER IN THE NOSEWHEEL STEERING HYDRAULIC
SYSTEM
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 27

SERVICE BULLETIN INCORPORATION SHEET − "100−32−31"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier. If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
100−32−31 03
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
