# Bombardier Service Bulletin 100-34-38

Copy: No revision named ("SB 100-34-38"), 11 pages: PDF https://openairdocs.org/files/sha256/d5/ff/d5ffa2e85ed5f18ed295fa66fccbdfa97f39b13e33e74f729a47d6df0810cf3f; text https://openairdocs.org/service-documents/bombardier/sb-100-34-38/file/d5ffa2e85ed5.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-3140; AD 2016-02-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 100-34-38
- Page: https://openairdocs.org/service-documents/bombardier/sb-100-34-38

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-02-05](https://openairdocs.org/ad/2016-02-05.md), effective Mar 8, 2016: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-100-34-38/proposed.md).

## Text (11 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-3140; AD 2016-02-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

MODIFICATION - PITOT-STATIC AND TEMPERATURE SYSTEM - PITOT-STATIC
PROBE HEATER REDESIGN
The information below is provided for your reference. For full details, please see
corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Before January 30, 2019
EFFECTIVITY: A/C Serial No. 20003 to 20500
MANPOWER: 12 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION NOYES
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
To place an order for parts or kits, please call Bombardier Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
www.cic.bombardier.com
MODEL BD−100−1A10 (CL−300)
ATA 34−11
NAVIGATION
Basic Issue: Jan 09/2014 100−34−38
Page 1 of 1
This Service Bulletin is available at:

### Page 2

MODIFICATION - PITOT-STATIC AND TEMPERATURE SYSTEM - PITOT-STATIC
PROBE HEATER REDESIGN
1. PLANNING INFORMATION
A. Effectivity
BD−100−1A10 aircraft, Serial No. 20003 to 20500.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action
changes to make sure that this bulletin can be completed.
B. Reason
The current Pitot−Static probe heater design may exhibit a failure which results in
the heating function to remain ON when not selected and the heating performance
may also be degraded. The new Pitot−Static Probe heater provides a more robust
design that will prevent these failure cases to occur.
SERVICE BULLETIN
www.cic.bombardier.com
MODEL BD−100−1A10 (CL−300)
ATA 34−11
NAVIGATION
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2014 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Jan 09/2014 100−34−38
Page 1 of 8
This Service Bulletin is available at:

### Page 3

This Service Bulletin gives instructions to remove the Pitot−Static probes and
replace them with new probes that have a more robust design to the heater
assembly component.
C. Description
This Service Bulletin gives instructions to:
− Remove the pitot−static probes,
− Return the pitot−static probes for disposal,
− Install new pitot−static probes, and
− Do the necessary tests to make sure that the system operates correctly.
D. Compliance
Recommended before January 30, 2019.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA in
accordance with established procedures.
F. Manpower
NOTES: 1. The man−hours given are estimates to help you schedule the tasks
given in this bulletin. The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to SB
100−00−02.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the labor estimates and should be considered
for planning purposes before you schedule this Service Bulletin.
12 man−hours are necessary to do this modification.
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 2 of 8

### Page 4

The labor required to do this Service Bulletin is at no cost for aircraft in new aircraft
warranty at time of Service Bulletin release (Basic Issue) if:
1. the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
2. this Service Bulletin is scheduled within the compliance time
G. Material − Cost and Availability
No kit is necessary to do this modification.
For the parts necessary to do this modification, refer to Paragraph 3.B.
The parts are available at no cost for aircraft in new aircraft warranty at time of
Service Bulletin release (Basic Issue) if a no−charge purchase order is sent to
Bombardier Aerospace within the compliance time.
This Service Bulletin is covered by a dedicated schedule. To ensure a timely and
effective return programm, advance scheduling is required through our In−Service
Implementation Team (ISIT). Please contact your Regional Manager (RM), Field
Service Representative (FSR) or Customer Service Representative (CSR) as soon
as is practical to schedule your aircraft.
Send removed units for disposal to Bombardier Aerospace at one of the two
addresses given below:
NOTE: Applicable only to aircraft in new aircraft warranty at time of Service
Bulletin release (Basic Issue).
Learjet − Core Returns
8219 West Irving, Bldg 9, Dock 9,
Wichita, KS 67209
USA
Or
Distribution Centre Frankfurt − Core Returns
Bombardier Aerospace Germany Gmb H
Hans−Boeckler−Strasse 9
GROSS−GERAU Hesse 64521
Germany
Refer to your Material Return Authorization (MRA) form to find the applicable return
address.
For those aircraft out of new aircraft warranty at the time of Service Bulletin
distribution, Smart Parts Plus pays for the parts within the compliance time from
Service Bulletin distribution date (Basic Issue).
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 3 of 8

### Page 5

H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
20−00−04 KS5549 Inclinometer
20X−00−04 M1−G−Kit Portable Bonding Tester
24−00−24 S4933959−501 Tag, Circuit Breaker
34X−11−01 G700−341101−7 Leveling Fixture Pitot Tube
Commercially Available −
Wrench, Torque
(range, 0 to 50 lbf in (0 to
5.65 Nm))
NOTES: 1. Refer to the BD−100 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for acceptable GSE
equivalents.
I. Weight and Balance
No change.
J. Electrical Load Data
No change.
K. References
− Bombardier Aerospace, Modification Summary, BB100T010709, Rev. B.
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI),
C−100−000−34−0060, Rev. − −.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
− Bombardier Aerospace, Kit Drawing K1000070293, Rev .− −.
− Bombardier Aerospace, SB 100−00−02, Service Bulletin Description and Policy.
− BD−100 Aircraft Maintenance Manual (AMM), Chapters 6, 7, 24 and 34.
− BD−100 Aircraft Illustrated Parts Catalog (AIPC), Chapter 34.
L. Other Publications Affected
− BD−100 Aircraft Illustrated Parts Catalog (AIPC), Chapter 34.
M. Equivalent Service Bulletin
None.
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 4 of 8

### Page 6

2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the BD−100 Aircraft
Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
BD−100 AMM, Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
LCBP E2 L PITOT 211
RCBP E2 R PITOT 212
B. Modification
(1) Remove the LEFT and RIGHT pitot−static probes. Refer to
AMM 34−11−01−000−801.
(2) Dispose of the removed pitot−static probes as follow:
− For aircraft in new aircraft warranty at time of Service Bulletin release
(Basic Issue), return the pitot−static probes for disposal. Refer to Paragraph
1.G. for instructions.
− For aircraft out of warranty at time of Service Bulletin release (Basic Issue),
discard the removed pitot−static probes.
(3) Install the new LEFT pitot−static probe, Part No. 0856WC3, and the new
RIGHT pitot−static probe, Part No.0856WC4. Refer to
AMM 34−11−01−400−801.
C. Close−out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Lower the complete aircraft. Refer to AMM 07−10−01−586−801
D. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 5 of 8

### Page 7

In an effort to improve the quality of our technical communications, we are
requesting your feedback. Please take a moment to fill out our easy on−line Service
Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
No kit required.
B. Parts
The parts that follow are necessary to do this Service Bulletin and are available
from Bombardier Aerospace Parts Services, Montreal:
NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
0856WC3 1
Probe,
Pitot−Static
LH
0856WC1 Refer toParagraph 1.G.
0856WC4 1
Probe,
Pitot−Static
RH
0856WC2 Refer toParagraph 1.G.
MS24694S98 9 Screw MS24694S98 Discard
NOTE: The part numbers for the items listed above are subject to change without
revision to this Service Bulletin. In case of discrepancy between this list
and any other list, the Illustrated Parts Catalog prevails and shall be used
to determine the latest part number.
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 6 of 8

### Page 8

C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aerospace does not pay
for these consumables.
DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY
SUPPLIER
(SEE
NOTE)
Compound,
Sealing
CT:
B1/2= 30
hours
B 2 = 48
hours
B 4 = 72
hiours
Pro Seal 870
Class B
MIL−PRF−81733
Type II, Class I,
Grade A
As Necessary Code: A
Compound,
Sealing
CT:
C48 = 56
days
Pro Seal 870
Class C
MIL−PRF−81733
Type IV, Class I,
Grade A
As Necessary Code: A
Alcohol,
Isopropyl − TT−I−735 As Necessary Code: B
NOTES: 1. Refer to the table that follows for each suppliers address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
PRC−Desoto International
5676 Timberlea Blvd.
Mississauga, Ontario
Canada, L4W 4M6
Tel.: (905) 629−7999
Code: B
Commercially Available
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 7 of 8

### Page 9

D. Publications
No publications required.
MODEL BD−100−1A10 (CL−300)
Basic Issue: Jan 09/2014 100−34−38
Page 8 of 8

### Page 10

100−34−38 Basic Jan 09/2014
MODIFICATION − PITOT−STATIC AND TEMPERATURE SYSTEM −
PITOT−STATIC PROBE HEATER REDESIGN
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 11

SERVICE BULLETIN INCORPORATION SHEET − "100−34−38"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier. If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
100−34−38 basic
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
