# Bombardier Service Bulletin 215-4414

Copy: Revision 1 ("U.S. DOT/FAA - Service Information"), 16 pages: PDF https://openairdocs.org/files/sha256/b4/97/b4979564f91719088c6a7a7c8d22a8af6372752ae14c3ba7a0e9a92d8234b312; text https://openairdocs.org/service-documents/bombardier/sb-215-4414/file/b4979564f917.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2010-1108; AD 2011-03-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 215-4414
- Latest revision known: 215-4414, Revision 1, dated March 12, 2010 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-215-4414

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-17-17](https://openairdocs.org/ad/2017-17-17.md), effective Oct 11, 2017: Revision 1
- [AD 2011-03-08](https://openairdocs.org/ad/2011-03-08.md), effective Mar 14, 2011: Revision 1

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-215-4414/proposed.md).

## Text (16 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2010-1108; AD 2011-03-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin 215-4414March 12/10
ATA Ref: 27-10
32-40Page 1 of 1
MODEL CL-215-6B11 (415)
REVISION TRANSMITTAL SHEET
FLIGHT CONTROLS / LANDING GEAR
SPECIAL INSPECTION OF THE ACCUMULATOR SCREW CAPS P/N 08−8425−014
ON TACTAIR OR YORK ACCUMULATOR P/N 08−8423−010 (MS28700−3)
Service Bulletin No.: 215−4414 Date of Original Issue: July 9/09
Revision No.: 1 Date of Issue: March 12/10
NOTES: 1. NO RETROACTIVE ACTION IS REQUIRED ON AIRCRAFT
MODIFIED TO THE PREVIOUS ISSUE OF THIS SERVICE
BULLETIN.
2. This revision supersedes the previous issue of this Service Bulletin.
3. Black bars in the left margin of this Service Bulletin and the details on
this Revision Transmittal Sheet refer to changes made since the
previous issue.
This Revision is issued to:
1. Add “York” after the name Tactair to make the accumulators “Tactair or York” in the title and
throughout the Service Bulletin.
2. Change the revision of Bombardier Aerospace Restriction and/or Special Instruction (RSI)
C-3817, from Revision B to B-1.

### Page 2

Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 1 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
MODEL CL-215-6B11 (415)
SERVICE BULLETIN
FLIGHT CONTROLS / LANDING GEAR
SPECIAL INSPECTION OF THE ACCUMULATOR SCREW CAPS P/N 08−8425−014
ON TACTAIR OR YORK ACCUMULATOR P/N 08−8423−010 (MS28700−3)
1. Planning Information
A. Compliance
The inspections described in this Service Bulletin is mandatory.
Time limitation for the visual inspection, PART A of this service Bulletin.
For hydraulic accumulator assemblies that have less or equal to 750 flight cycles, the
visual inspection as described in this Service Bulletin must be performed before the
accumulator reaches 1000 flight cycles, unless otherwise directed by the airworthiness
authority of the operator.
For hydraulic accumulator assemblies that have more than 750 flight cycles, the visual
inspection must be performed within 250 flight cycles upon receiving this Service Bulletin.
The visual inspection must be repeated every 250 flight cycles until the first ultrasonic
inspection (PART B of this service Bulletin) has been completed at which point the visual
inspection may be discontinued.
Time limitation for the first ultrasonic inspection, PART B of this service Bulletin.
For hydraulic accumulator assemblies that have less or equal to 750 flight cycles,
Bombardier Aerospace recommends to perform the ultrasonic inspection as described in
this Service Bulletin before the accumulator reaches 1000 flight cycles, unless otherwise
directed by the airworthiness authority of the operator.
For hydraulic accumulator assemblies that have more than 750 flight cycles, the
ultrasonic inspection must be performed within 250 flight cycles upon receiving this
Service Bulletin.
The ultrasonic inspection must be repeated every 750 flight cycles.
NOTE: This Service Bulletin is applicable only to aircraft in the condition as originally
delivered by Canadair and/or Bombardier Aerospace or as subsequently modified by
Canadair and/or Bombardier Aerospace Service Bulletin(s).  Prior to incorporation of
this Service Bulletin, the status of any related systems or structural modification(s)
introduced by Supplementary Type Approval (STA) or equivalent action must be
examined for compatibility with the modifications and test procedures (if applicable)
detailed in this Service Bulletin.

### Page 3

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 2 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
B. Approval
The technical content of this Service Bulletin has been approved under the authority of the
Design Approval Organization No: DAO #93-Q-02.
C. Effectivity
CL-215-6B11 (415) turboprop aircraft Serial Nos. 2001 to 2990.
D. Reason
Several accumulator screw cap failures have been reported since 2000 on the Bombardier
CRJ-200.  Although the Bombardier 415 aircraft uses similar hydraulic accumulators from the
same vendor, there have been no reports of accumulator failure from any Bombardier 415
operator.  The specific cause of the failure was linked to fatigue in the filet radius of the screw
cap shoulder with other failures originating at the thread runout.
E. Description
This Service Bulletin gives instructions to:
− Clean the inspection area on the accumulator screw caps in preparation to perform the
visual or ultrasonic inspection
− Perform a visual inspection of the screw caps on the four accumulator for indications
of cracks
− Calibrate the ultrasonic test equipment
− Perform the ultrasonic inspection of the suspect accumulator screw caps.
NOTE: The inspection requirement is split into two parts; PART A and PART B.
− PART A is for the visual inspection of the accumulator screw caps
− PART B is for the ultrasonic inspection of the accumulator screw caps.

### Page 4

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 3 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
F. Manpower
For PART A
We estimate that it will take 1 technician approximately 3 hours to complete this Service
Bulletin.
For PART B
We estimate that it will take 1 technician approximately 4 hours to complete this Service
Bulletin.
NOTE: Only qualified ultrasonic inspectors certified with a level I, II, or III category per the
following specifications are authorized to perform the special inspections described in
this Service Bulletin:
− MIL−STD−410
− CDN/CGSB-48.9712-95
− COFREND (COnfederation FRançaise pour les Essais Non Destructifs)
− CoSAC (Computational Structural Analysis Committee)
− ISO 9712
− or equivalent.
G. Material Availability
This Service Bulletin contains no kit.  Tactair or York Calibration Reference Standard (CRS)
T11651 is available upon request from Bombardier Aerospace, contact your Amphibious
Aircraft Technical Representative for details.
H. Tool Availability
For PART B
− Ultrasonic Flaw Detector, Sonatest Model: UFSD
− Potted angle beam contact transducer
− For accumulator screw caps P/N 08-8425-104
45 degrees refractive angle in aluminum, 5.0 MHz frequency, contact surface 0.33-inch
(8.38 millimeters) by 0.70-inch (17.78 millimeters), 0.57-inch (14.48 millimeters) high
Harisonic Model: PAB-0504,45AL
− Microdot to BNC coaxial cable
− Tactair or York CRS T11651
− Gorptech, Industrial ultrasonic couplant gel (available from Inspectech Ltd.) or equivalent.

### Page 5

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 4 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
I. Weight and Balance
Not affected.
J. Electrical Load Data
Not affected.
K. References
Bombardier Aerospace Restriction and/or Special Instruction (RSI) C-3817, Revision B-1.
L. Publications Affected
None.
M. Related Service Bulletin
None.

### Page 6

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 5 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
2. Accomplishment Instructions
NOTE: For this modification, it is assumed that standard maintenance and repair practices will be
applied in accordance with applicable Product Support Publications (PSP).
A. Preparation
WARNING: MAKE SURE THAT PERSONNEL AND EQUIPMENT ARE A SAFE DISTANCE
AWAY FROM ALL HYDRAULICALLY OPERATED SYSTEMS BEFORE YOU
REMOVE THE ELECTRICAL POWER.  IF YOU DO NOT DO THIS, INJURIES
TO PERSONNEL AND DAMAGE TO EQUIPMENT CAN OCCUR.
(1) Remove the electrical power.  Refer to PSP 492, Maintenance Manual, Chapter 24-00-00,
ELECTRICAL POWER − MAINTENANCE PRACTICES.
(2) Release the hydraulic pressure.  Refer to PSP 492, Maintenance Manual, Chapter
29-00-00, HYDRAULIC POWER − MAINTENANCE PRACTICES.
(3) Release the nitrogen pressure from the accumulators.  Refer to PSP 492, Maintenance
Manual.
(4) Gain access to the brake, rudder, elevator, and aileron accumulators.  Refer to FIGURE 1
for accumulator locations.
(5) Clean the entire (360 degrees around) tapered section of the accumulator screw cap with
isopropyl alcohol and a clean cloth/rag free of dirt and grease.
3. PART A: Visual Inspection Procedures
Refer to the shaded area in FIGURE 2 for the location to be inspected.
A. Inspection Procedure
(1) With the aid of a light source and an inspection mirror, visually inspect the full
circumference of the two accumulator screw caps for evidence of cracks.
(2) Acceptance/Rejection Criteria
(a) If no crack is found, the accumulator can be returned to service.  Refer to Chapters
27 and 32 of PSP 492.
1 Go to Section 6. RECORDING and record the incorporation of PART A of this
Service Bulletin.
(b) If a crack is found or suspected after the visual inspection, the effected accumulator
must be replaced before the next flight.
1 Return the complete accumulator to bombardier Aerospace for further
investigation OR:
2 Perform an ultrasonic inspection in accordance with PART B of this Service
Bulletin.

### Page 7

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 6 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
0
FIGURE 1
BRAKE
ACCUMULATOR
AILERON
ACCUMULATOR

### Page 8

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 7 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
HIGH PRESSURE
GAUGE
0
FIGURE 1
ELEVATOR
ACCUMULATOR
RUDDER
ACCUMULATOR
AIR (HIGH 
PRESSURE 
CHARGING) 
VALVE 
ACCUMULATOR
SCREW CAP
ACCUMULATOR
SCREW CAP

### Page 9

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 8 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
POTENTIAL CRACK LOCATION
FIGURE 2
CLEAN ENTIRE TAPERED SECTION (SHADED) ON SCREW 
CAPS WHERE TRANSDUCER WILL BE PLACED FOR
SCANNING, APPLY SOLVENT TO THIS AREA1
NOTE
Clean entire tapered section 
(shaded) on screw
caps where transducer will 
be placed for scanning,
apply solvent to this area.
EXTERNAL
SHOULDER
POTENTIAL CRACK AT
INTERNAL SHOULDER
1
ACCUMULATOR
SCREW CAP

### Page 10

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 9 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
4. PART B: Ultrasonic Inspection Procedure
NOTE: Tactair or York CRS T11651 is available upon request from Bombardier Aerospace,
contact your Amphibious Aircraft Technical Representative for details.
Refer to the shaded area in FIGURE 2 for the location to be inspected.
A. Equipment Calibration
(1) If not already accomplished do the two steps that follow:
WARNING: MAKE SURE THAT PERSONNEL AND EQUIPMENT ARE A SAFE DISTANCE
AWAY FROM ALL HYDRAULICALLY OPERATED SYSTEMS BEFORE YOU
REMOVE THE ELECTRICAL POWER.  IF YOU DO NOT DO THIS, INJURIES
TO PERSONNEL AND DAMAGE TO EQUIPMENT CAN OCCUR.
(a) Remove the electrical power.  Refer to PSP 492, Maintenance Manual, Chapter
24-00-00, ELECTRICAL POWER − MAINTENANCE PRACTICES.
(b) Release the hydraulic pressure.  Refer to PSP 492, Maintenance Manual, Chapter
29-00-00, HYDRAULIC POWER − MAINTENANCE PRACTICES.
(c) Release the nitrogen pressure from the accumulators.  Refer to PSP 492,
Maintenance Manual.
Refer to FIGUREs 3, 4, and 5.
(2) Remove the suspected accumulator from the aircraft.  Refer to PSP 492, Maintenance
Manual, Chapter 27 and/or Chapter 32 for accumulator removal procedures.
(3) Attach the angle beam transducer (45 ° angle) to coaxial cable and connect the cable to
the ultrasonic instrument.
(4) Set the ultrasonic instrument to PULSE-ECHO test mode and 5 MHz test frequency.
(5) Apply an even coat of couplant gel on the tapered surface of the CRS.
(6) Place the transducer firmly to the tapered section on the CRS such that the sound beam
is directed towards the internal shoulder of the screw cap.
(7) Manipulate the transducer to obtain a maximized amplitude signal from the EDM notch A
(NA) and adjust the instrument GAIN control to set the signal to 80% Full Screen Height
(FSH).
(8) Adjust and position the leading edge of the notch signal at 50% of the horizontal baseline
and the signal from the external shoulder at approximately 90% for the CRS T11651.
Refer to Figures 4.

### Page 11

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 10 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
B. Inspection Procedure
Refer to FIGURE 2 and 5.
(1) Apply an even coat of couplant gel on the tapered surface on the accumulator screw cap
to be inspected.
(2) Place the transducer firmly to the tapered section on the screw cap such that the sound
beam is directed towards the internal shoulder of the screw cap.
(3) Manipulate the transducer towards and away from the shoulder with a slight swiveling
motion.
(4) Inspect the entire 360 degrees around the screw cap for cracks.
C. Evaluation of Indications
(1) Any indication with an amplitude signal of 60% FSH or greater at approximately 50 % of
the horizontal baseline limit is considered a suspect indication and is cause for further
evaluation.
(2) Verify and make sure that the indication is not from the external shoulder i.e. the
transducer moved too much forward on to the edge or the baseline has shifted
accidentally.
(3) If the indication is a crack, determine the approximate length of the crack by scanning it in
both directions from the peak signal until the signal has dropped to 40 % FSH and mark
the centre point of the transducer.  The circumferential crack length is the distance
between the two points.
D. Acceptance or Rejection Criteria
(1) All distinct indications with an amplitude signal of 60% FSH or greater appearing at
approximately 50% of the horizontal baseline is classified as a crack indication and is
cause for rejection.
(2) Record and report the results of the ultrasonic inspection to your Amphibious Aircraft
Technical Representative.

### Page 12

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 11 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
5. Installation
If an accumulator was remove for an ultrasonic inspection and determined to be serviceable or a
new accumulator is required, refer to PSP 492, Maintenance Manual, Chapter 32 for installation
and test procedures for the break accumulators and Chapter 27 for installation and test procedures
for the rudder, elevator, or aileron accumulators.
6. Recording
When this Service Bulletin is completed, make the entry in the aircraft log book and send back the
attached Incorporation Notice to Amphibious Aircraft Technical Publications.
7. Material Information
This Service Bulletin contains no kit.  Tactair or York CRS T11651 is available upon request from
Bombardier Aerospace, contact your Amphibious Aircraft Technical Representative for details.

### Page 13

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 12 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
TACTAIR OR YORK CALIBRATION REFERENCE STANDARD DETAILS (T11651)
FIGURE 3
NOTCH B
R 0.080
45
o
45
o
NOTCH A
R 0.050
NOTCH C
R 0.121
3/16 MAX
1.127
1.093
1.524
1.127
1.098
3X 0.0055 MAX

### Page 14

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 13 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
100%
50%
0 50 100
IP
EES
100%
50%
0 50 100
IP
EES
IP = INITIAL PULSE
EES = ECHO FROM EXTERNAL SHOULDER
ENA = ECHO FROM NOTCH A
TRANSDUCER
PLACEMENTEXTERNAL
SHOULDER
CRT DISPLAY CALIBRATION AND FAMILIARIZATION (T11651)
FIGURE 4
INTERNAL
SHOULDER
0.25 INCH REF
TRANSDUCER
SOUND EXIT POINT
EDM NOTCH A
CRS T11651
END OF TAPERED
ENA

### Page 15

MODEL CL-215-6B11 (415)
SERVICE BULLETIN
Bombardier 415
Service Bulletin 215-4414
July 9/09 ATA Ref: 32-40
Page 14 of  14 ATA Ref: 27-10
Rev. 1 March 12/10
TRANSDUCER PLACEMENT AND SCANNING MOVEMENT
FIGURE 5
EXTERNAL
SHOULDER
TRANSDUCER
PLACEMENT AND
SCANNING MOVEMENT
POTENTIAL CRACK AT
INTERNAL SHOULDER

### Page 16

Upon completion of Service Bulletin(s), please fill in and return by fax to:
Service Bulletin Number(s) Rev.
Aircraft Serial No.
Date of Incorporation
Aircraft Reg. No.
Technical Publication,
Dept. 649-DBF−(9)
Bombardier Aerospace
Amphibious Aircraft
St. Laurent, Quebec
Fax No.: (514) 855−7602
Airframe Hours
Remarks
Name
SERVICE BULLETIN
INCORPORATION NOTICE
REPLY FAX
Customer/Operation
(Please Print)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
