# Bombardier Service Bulletin 40-71-02

Copy: No revision named ("SB40-71-02"), 32 pages: PDF https://openairdocs.org/files/sha256/d1/b2/d1b2b8cc01ab03fa2f8183199960fc2f814addecc8f16aa5394319973078b4c9; text https://openairdocs.org/service-documents/bombardier/sb-40-71-02/file/d1b2b8cc01ab.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2010-0802; AD 2011-13-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 40-71-02
- Page: https://openairdocs.org/service-documents/bombardier/sb-40-71-02

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-13-10](https://openairdocs.org/ad/2011-13-10.md), effective Aug 1, 2011: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-40-71-02/proposed.md).

## Text (32 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2010-0802; AD 2011-13-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SB 40-71-02
Page 1 of 28
b 2
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
Refer to applicable government agency regulations and requirements and make sure that the work described 
in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards. 
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by 
any means without the prior written consent of Bombardier Inc. and/or its affiliates. 
© 2007, Bombardier Inc. All rights reserved. 
Challenger*, Global Express*, Learjet*, are Trademarks of Bombardier Inc.
LEARJET 40
RECOMMENDED
SB 40-71-02
SERVICE BULLETIN
If you cannot do all steps in this service bulletin because of an STC change to the aircraft, speak to the STC
holder or the regional Federal Aviation Administration (FAA) office for information and disposition.
POWER PLANT - MODIFICATION OF THE LEFT AND RIGHT ENGINE WIRE ROUTING AND
CLAMPING
1. Planning Information
A. Effectivity
(1) Learjet 45-2001 thru 45-2069.
B. Reason
(1) The purpose of this modification is to improv e the routing and clamping of the left and right engine
alternator wire harnesses and the starter/generator wire bundles to prevent chafing. An inspection
to reveal possible chafing between the left engine hydraulic and fuel tubes is also necessary.
NOTE: Aircraft that have previously installed the left engine hydraulic pump case drain tube
part number 4529101090-005 tube per Learjet Service Bulletin A40-29-03 are not
required to replace the tube as instructed in this service bulletin. 
CONTACT INFORMATION DISTRIBUTION DATE
Business Aircraft
Learjet Inc.
MS 53
P.O. Box 7707
Wichita, Kansas 67277-7707
(316) 946-2421
February 13, 2007

### Page 2

SB 40-71-02
Page 2 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
C. Description
(1) This service bulletin provides instructions to c hange the routing and clamping configuration of the
engine and alternator wire harnesses, and the starter/generator wire bundles. Instructions are also
provided to inspect specific hydr aulic tubes located within the left engine nacelle for chafing
between the adjacent fuel tubes, to replace tubes damaged beyond acceptable limits, and to
secure the hydraulic tubes with additional clamps.
D. Compliance
(1) Recommended - Bombardier Learjet Inc. recommend s that you do this service bulletin in less than
300 flight hours from the initial distribution date of this service bulletin.
E. Approval
(1) The Federal Aviation Administration (FAA) has ap proved the technical content in this publication
that has an effect on the airplane type design.
(2) The European Aviation Safety Agency (EASA) has  accepted the technical content in this publica-
tion that has an effect on the airplane type design.
F. Labor Hours - Estimated Accomplishment Time
NOTE: These labor hours are an estimate and ar e for planning purposes only. Facility and per-
sonnel capabilities may cause the labor hours to change.
G. Expense Coverage
(1) Labor Coverage
(a) Aircraft in the new aircraft warranty period, labor coverage is provided.
NOTE: For labor coverage to apply, you must do this service bulletin at a Bombardier
Business Aviation Service Fa cility or at a Bombardier Learjet Authorized Service
Facility. You must do this service bulleti n within 24 months from the release date
of this service bulletin, basic issue, February 13, 2007.
(b) Aircraft out of the new aircraft warranty period, no labor coverage is provided.
-801 
KIT
-802 
KIT TASK
1.0 1.0 Labor hours to gain access.
3.5 4.0 Labor hours to do th e aircraft modification.
1.5 1.5 Labor hours to do a func tional test/operational check.
1.0 1.0 Labor hours to return the aircraft to airworthy status.
7.0 7.5 Total Labor Hours

### Page 3

SB 40-71-02
Page 3 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
(2) Material Coverage
(a) Aircraft in the new aircraft warranty period, material coverage is provided.
NOTE: For material coverage to apply, this service bulletin kit must be placed on order
from Bombardier within  12 months from the basic issu e distribution date of this
service bulletin, February 13, 2007.
(b) Aircraft out of the new aircraft warranty period, no material coverage is provided.
(3) Smart Parts 
(a) For those aircraft in the new aircraft warranty peri od at the time of service bulletin distribution,
Smart Parts Plus does not pay for the kits at any time.
(b) For those aircraft out of the new aircraft warranty period at the time of service bulletin distribu-
tion, Smart Parts Plus pays for the kits for up to 12 months from the service bulletin distribution
date.
H. Material Required to do this Service Bulletin
NOTE: The above price can change. 
To place an order for these kits, please call Bombardier Aerospace Parts Logistics Busi-
ness Aircraft Customer Service at 1-888- 222-1428 in North America or 1-316-946-2377
outside North America for information.
Refer to paragraph 3.A. to know which kit is necessary.
(1) Other materials/parts necessary to do this service bulletin.
NOTE: To place an order for these materials, please call Bombardier Aerospace Parts Logis-
tics Business Aircraft Customer Service at 1-888-222-1428 in North America or 1-316-
946-2377 outside North America for information.
PART NUMBER QTY NOMENCLATURE PRICING
4571530001-801 1 Service Bulletin Kit $108.00
4571530001-802 1 Service Bulletin Kit $80.45
PART NUMBER NAME QTY MANUFACTURER
361 Tape-Fiberglass 1 Roll 3-M Company, St. Paul, MN
MIL-T-43435E 
or equivalent
String Tie As Required Commercially Available
Red GLPT Insulating Varnish As Required Commercially Available

### Page 4

SB 40-71-02
Page 4 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
(2) Other materials/parts that may be necessary to do this service bulletin based on inspection results.
NOTE: *  Required on aircraft that have not installed the 4529101090-005 left engine 
hydraulic pump case drain tube per Learjet Service Bulletin A40-29-03. 
To place an order for these parts, please  call Bombardier Aerospace Parts Logistics
Business Aircraft Customer Service at 1-888-222-1428 in North America or 1-316-
946-2377 outside North America for information.
I. Tooling
(1) None.
J. Weight and Balance
(1) Change in basic weight and moment.
K. References
(1) Learjet Maintenance Manual, Chapters 12, 20, 24, 28, 29, 71 and 80.
2. Accomplishment Instructions
A. Gain Access
(1) Disconnect the external electrical power and the main and emergency batteries from aircraft.
(Refer to Learjet Maintenance Manual, Chapter 24.)
(2) On aircraft 45-2001 thru 45-2026,  remove the left and right engine upper and lower engine cowl-
ing. (Refer to Learjet Maintenance Manual, Chapter 71.)
(3) On aircraft 45-2027 thru 45-2069, remove the left engine lower cowling.
PART NUMBER QTY NOMENCLATURE EFFECTIVITY
4529101067-001    1 Tube-Hydraulic
(Pressure)
45-2001 thru 45-2026
4529101071-001    1 Tube-Hydraulic
(Pump Supply)
45-2001 thru 45-2026
4529101075-005    1 Tube-Hydraulic
(Pump Case Drain)
45-2001 thru 45-2026
4529101090-005    1 Tube-Hydraulic
(Pump Case Drain
All
* See Note Below
4573100000V13-001    1 Tube-Fuel
(Motive Flow)
45-2001 thru 45-2026
4573100000V12-001    1 Tube-Fuel (Supply) 45-2001 thru 45-2026
CHANGE IN BASIC WEIGHT CHANGE IN BASIC MOMENT
Plus (+) 1.21 pounds Plus (+) 629.2 inch-pounds

### Page 5

SB 40-71-02
Page 5 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
B. Modification of Aircraft
(1) On aircraft 45-2001 thru 45-2026,  disconnect the left engine starter/generator wire bundles and
remove the clamping as follows; 
(a) Disconnect the starter/generator  wire bundles (G1-B "+" and G1-E "-") from the starter/genera-
tor. 
(b) Disconnect the engine wire harness (G 1 and G1P1) from the starter/generator. 
(c) Disconnect alternator wire harness (G3P2) from the alternator.
(d) Remove the existing clamping configuration of the starter/ge nerator wire bundles at nacelle
station 180.00. (See Figure 1, View C-C.)
(2) On aircraft that have not installed the 4529101090-005 left engine hydraulic pump case drain tube
per Learjet Service Bu lletin No. A40-29-03,  replace the 4529101090-001 left engine hydraulic
pump case drain tube with a new 4529101090-005 tube. (See Figure 1, View L-L.) 
(3) On aircraft 45-2001 thru 45-2026,  inspect the remaining hydraulic tubing on the left engine for
clearance as follows;
(a) Inspect the hydraulic tubing for clearance and chafing in the area shown. (See Figure 1, View
K-K and Detail M.) (Refer to Learjet Maintenance Manual, Chapter 20 for damage tolerance
on tubing.) 
CAUTION: REVIEW THE SAFETY PRACTIC ES WHEN YOU WORK WITH OR AROUND
THE AIRCRAFT HYDRAULIC  SYSTEM. (REFER TO LEARJET MAINTE-
NANCE MANUAL, CHAPTER 29.)
(b) On aircraft where chafing on the hydraulic tubes is beyond acceptable limits, do as follows;
1) Depressurize the hydraulic system. (Refer to Learjet Maintenance Manual, Chapter 12.)
2) Replace the chafed tubing.
(c) Install additional clamping to the hydraulic tubing. (See Figure 1, Detail M.)
(d) Inspect the adjacent fuel tubing for interference with the hydraulic tubing.
CAUTION: REVIEW THE SAFETY PRACTIC ES WHEN YOU WORK WITH OR AROUND
THE AIRCRAFT FUEL SYSTEM. (REFER TO LEARJET MAINTENANCE MAN-
UAL, CHAPTER 28.)
(e) On aircraft where interference between the fu el tubing and hydraulic tubing is found,  replace
the fuel tubing as noted and shown. (See Figure 1, View K-K.)
(4) On aircraft 45-2027 thru 45-2069,  inspect the remaining left engine hydraulic tubing for clearance
with adjacent tubing, structure, and other components.
(5) On aircraft 45-2001 thru 45-2026, change the routing and clamping of the left engine starter/gener-
ator wire bundles as follows; 
(a) Route the starter/generator wire bundles and the engine wire harness (G1 and G1P1)
between the engine and the hydraulic pump. (See Figure 1, Detail B.)
NOTE: The starter/generator wire bundles should be next to the engine and inboard of
the thrust reverser hydraulic plumbing coming through nacelle station 180.00.

### Page 6

SB 40-71-02
Page 6 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
(b) Route and clamp the starter/generator wire bund les as shown. (See Figure 1, View A-A, Detail
D, Detail E, View F-F and View G-G.)
(c) Route and clamp the starter/generator wire bund les at nacelle station 186.00 as shown. (See
Figure 1, View H-H and View J-J.)
(d) Apply MIL-I-22129 spiral wrap or equivalent around the starter/generator wire bundles as nec-
essary. (See Figure 1, Detail B and View C-C.)
NOTE: Make sure that the minimum clearance requirements are maintained between the
spiral wrapped starter/generator wire bundles and adjacent tubing and compo-
nents. (Refer to Learjet Maintenance Manual, Chapter 20 for clearance require-
ments.)
(e) Connect the starter/gen erator wire bundles (G1-B "+" and G1-E "-") to the starter/generator.
(f) Starting immediately forward of nacelle statio n 186.00, apply MIL-I-22129 or equivalent spiral
wrap to engine wire harnesses (G1 and G1P1), and alternator wire harness (G3P2) as shown.
(See Figure 1, View H-H and View J-J.)
NOTE: At the location where alternator wire harness (G3P2) begins to route toward the
alternator, discontinue spiral wrapping the engine wire harnesses (G1 and G1P1).
Continue the spiral wrap on alternator wire harness (G3P2) up to the alternator.
(g) Connect the engine wire harness (G1 and G1P1) to the starter/generator.
(h) Use MIL-T-43435E or equivalent string tie to secure the spiral wrap to the harnesses.
(6) On aircraft 45-2001 thru 45-2026,  change the routing and clamping of the left engine alternator
wire harnesses (G3P1 and G3P2) as follows;
(a) Route alternator wire harness (G3P2) along the starter/generator wire bundles and secure to
starter/generator wire bundles as shown. (See Figure 1, View C-C, View H-H and View J-J.)
(b) Connect alternator wire harness (G3P2) to the alternator.
(c) Disconnect alternator wire harnesses (G3P1) from the alternator. 
(d) Route the alternator wire harness (G3P1)  as shown. (See Figure 1, View K-K.)
(e) Wrap alternator wire harness (G3P1) with fiberglass tape at bracket assemblies as shown.
(See Figure 1, View K-K.)
(f) Install new clamping configuration on alternator  wire harness (G3P1) as shown. (See Figure 1,
View K-K.)
(g) Connect alternator wire harness (G3P1) to the alternator.
(h) Apply MIL-I-22129 spiral wrap or equivalent  around alternator wire harnesses (G3P1) as nec-
essary. (See Figure 1, Detail B, View C-C and View K-K.)
NOTE: Make sure that the minimum clearance requirements are maintained between the
spiral wrapped alternator wire harnesses and adjacent tubing and components.
(Refer to Learjet Maintenance Manual, Chapter 20 for clearance requirements.)
(i) Use MIL-T-43435E or equivalent string tie to secure the spiral wrap to the harnesses.

### Page 7

SB 40-71-02
Page 7 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
(7) On aircraft 45-2001 thru 45-2026,  change the routing and clamping  configuration of the right
engine starter/generator wire bundles and alternator wire harnesses as follows;
(a) Disconnect alternator wire harnesses (G3P1 and G3P2) from the alternator.
(b) Remove the clamps and attaching hardware th at support alternator wire harnesses (G3P1 and
G3P2) to nacelle station 180.00. (See Figure 2, View C-C.)
(c) Disconnect the engine wire harness (G 1 and G1P1) from the starter/generator. 
(d) Install the new clamping configuration as shown,  (See Figure 2, View D-D, View E-E, View F-
F, View G-G, View H-H and View J-J.)
(e) Route alternator wire harnesses (G3P1 and G3P2) and engine wire harnesses (G1 and G1P1)
as shown. (See Figure 2, Detail B and View C-C.)
NOTE: Wire harnesses routed between nacelle  station 180.00 and 186.50 must be
routed between the engine and the hydraulic pump.
(f) Apply MIL-I-22129 spiral wrap or equivalent to the alternator wire harnesses (G3P1 and
G3P2) and engine wire harnesses (G1 and G1P1) as shown. (See Figure 2, View B-B and
View C-C.)
NOTE: Make sure that the minimum clearance requirements are maintained between the
spiral wrapped alternator and engine wire harnesses and adjacent tubing and
components. (Refer to Learjet Maint enance Manual, Chapter 20 for clearance
requirements.)
(g) Use MIL-T-43435E or equivalent string tie to secure the spiral wrap to the harnesses.
(h) Install new clamping configuration on alternator  wire harness (G3P1) as shown. (See Figure 2,
View C-C.)
(i) Route alternator wire harness (G3P2) along alternator wire harness (G3P1) and tie together
with MIL-T-43435E string tie or equivalent. Apply insulating varnish to secure string ties. (See
Figure 2, View C-C.)
(j) Connect alternator wire harnesses (G3P1 and G3P2) to the alternator.
(k) Connect engine wire harnesses (G1 and G1P1) to the starter/generator. 
NOTE: It is permissible to fold and tie engine wire harness (G1P1) as necessary to take
up excessive length.
(8) On aircraft 45-2001 thru 45-2026, do an inspection of the clearances between the wire harnesses
and the hydraulic and fuel tubing on the left and right engines. (Refer to Learjet Maintenance Man-
ual, Chapter 20.)
(9) On aircraft 45-2027 thru 45-2069, do an inspection of the clearances between the wire harnesses
and the hydraulic and fuel tubing on the left engine. (Refer to Learjet Maintenance Manual, Chap-
ter 20.)
(10) On aircraft that replaced hy draulic tubes due to chafing,  service the hydraulic system reservoir.
(Refer to Learjet Maintenance Manual, Chapter 12.)

### Page 8

SB 40-71-02
Page 8 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
C. Functional Test/Operational Check
(1) Connect the main and emergency batteries to the aircraft. (Refer to Learjet Maintenance Manual,
Chapter 24.)
(2) Connect external electrical power.
(3) Do the Automatic Engine Start for the left and ri ght engines. (Refer to Learjet Maintenance Man-
ual, Chapter 80.)
(4) Do the Generator Voltage Adjustment and Current Test. (Refer to Learjet Maintenance Manual,
Chapter 24.)
(5) On aircraft that replaced hydraulic or fuel tubes, check new tubes for leaks around fittings.
D. Return Aircraft to Airworthy Status
(1) Install the left and right engine upper and lowe r engine cowling. (Refer to Learjet Maintenance
Manual, Chapter 71.)
E. Compliance Response Form
(1) Complete the compliance response form.
(2) Send the compliance response form to Learjet Inc. as soon as possible.
F. Aircraft Maintenance Records
(1) Complete the Aircraft Maintenance Records.
NOTE: To complete the aircraft maintenance records, refer to FAR/CFR 43.9.

### Page 9

SB 40-71-02
Page 9 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
3. Material Information
A. Parts Required
(1) The 4571530001-801 Kit is for the left engine and contains the parts that follow.
NOTE: Some hardware comes in pre-packaged quantities. When that occurs, the quantity in the
kit will be more than the quantity in the parts list.
(2) The 4571530001-802 Kit is for the right engine and contains the parts that follow.
PART NUMBER QTY NOMENCLATURE
MS9592-014   1 Bracket
MS9592-387   1 Bracket
MS21919WCH4   2 Clamp
MS21919WCH5   2 Clamp
MS21919WCH10   1 Clamp
MS21919WCH11   5 Clamp
M85052/3-6   1 Clamp
M85052/3-8   1 Clamp
NAS1802-3-7   1 Screw
NAS1802-3-8   4 Screw
MS21042-3   4 Nut
NAS1149C0316R   1 Washer
SWT1/2Natural 15 ft. Spiral Wrap (MIL-I-22129)
PART NUMBER QTY NOMENCLATURE
MS9592-010   3 Bracket
MS9592-022   1 Bracket
AN743-C12   1 Bracket
MS21919WCH5   1 Clamp
MS21919WCH9   3 Clamp
MS21919WCH11   4 Clamp
NAS1802-3-8   3 Screw
MS21042-3   3 Nut
SWT1/2Natural 15 ft. Spiral Wrap (MIL-I-22129)

### Page 10

SB 40-71-02
Page 10 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
NOTE: Some hardware comes in pre-packaged quantities. When that occurs, the quantity in the
kit will be more than the quantity in the parts list.
B. Parts Removed List
PART NUMBER QTY NOMENCLATURE DISPOSITION EFFECTIVITY
MS9592-010   2 Bracket Destroy 45-2001 thru 45-2026
(Both Engines)
MS21919WH4   2 Clamp Destroy 45-2001 thru 45-2026
(RH Engine)
MS21919WH5   2 Clamp Destroy 45-2001 thru 45-2026
(RH Engine)
MS21919WH7   2 Clamp Destroy 45-2001 thru 45-2026
(RH Engine)
MS21919WH8   2 Clamp Destroy 45-2001 thru 45-2026
(RH Engine)
MS21919WH10   1 Clamp Destroy 45-2001 thru 45-2026
(LH Engine)
MS21919WH12   4 Clamp Destroy 45-2001 thru 45-2026
(RH Engine)
MS21919WH12   5 Clamp Destroy 45-2001 thru 45-2026
(LH Engine)
NAS1802-3-8   2 Screw Destroy 45-2001 thru 45-2026
(RH Engine)
NAS1802-3-9   2 Screw Destroy 45-2001 thru 45-2026
(LH Engine)
NAS43DD3-64FC   1 Spacer Destroy 45-2001 thru 45-2026
(LH Engine)
MS21042-3   1 Nut Destroy 45-2001 thru 45-2026
(LH Engine)
4529101067-001   1 Tube-Hydraulic
(Pressure)
Destroy 45-2001 thru 45-2026
* See Note Below
(LH Engine)
4529101071-001   1 Tube-Hydraulic
(Pump Supply)
Destroy 45-2001 thru 45-2026
* See Note Below
(LH Engine)

### Page 11

SB 40-71-02
Page 11 of 28
LEARJET 40
SERVICE BULLETIN
THIS SERVICE BULLETIN IS AVAILABLE AT:
www.cic.bombardier.com
Basic Issue: Feb 13/07
NOTE: *      On aircraft 45-2001 thru 45-2026, replace hydraulic tubes as necessary that have
       chafing beyond acceptable limits.
* *    On aircraft 45-2001 thru 45-2026, replace fuel tubes as necessary to correct or 
        prevent an interference condition with the adjacent hydraulic tubes.
* * *  Aircraft that have not installed the 4529101090-005 left engine hydraulic pump case
       drain tube per Learjet Service Bulletin No. A40-29-03.
4529101075-005   1 Tube-Hydraulic
(Pump Case Drain)
Destroy 45-2001 thru 45-2026
* See Note Below
(LH Engine)
4529101090-001   1 Tube-Hydraulic
(Pump Case Drain)
Destroy  45-2001 thru 45-2069
* * * See Note Below
(LH Engine)
4528200044-001   1 Tube-Fuel
(Motive Flow) 
Destroy 45-2001 thru 45-2026
* * See Note Below
(LH Engine)
4573100005-013   1 Tube-Fuel (Supply) Destroy 45-2001 thru 45-2026
* * See Note Below
(LH Engine)
PART NUMBER QTY NOMENCLATURE DISPOSITION EFFECTIVITY

### Page 12 (OCR)

LEARJET 40
SERVICE BULLETIN
• F  • G
NAC  NAC  NAC
FS  3  I FS  FS
180.00  200.00  209.15
NAC
WL
100.00
— F  G
NOTE  View A-A
Notes information is found
on the last sheet of this figure.
K40-407102-001-01
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 1 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 12 of 28

### Page 13 (OCR)

LEARJET 40
SERVICE BULLETIN
• ALTERNATOR WIRE HARNESS (G3P2)
ENGINE WIRE HARNESS (G1, G1P1)
(REF)
• C
NAC
FS
180.00
G1-E
• C G1-B  G1P1
(REF)
> STARTER/GENERATOR
WIRE BUNDLES
(REF)
(VIEW LOOKING INBOARD, LH ENGINE)
Detail B
K40-407102-001-02
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 2 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 13 of 28

### Page 14 (OCR)

LEARJET 40
SERVICE BULLETIN
CLAMP
MS21912WH12
CLAMP
MS21919WH10
BRACKET
MS9592-010
SCREW
NAS1802-3-9
NUT
MS21042-3
SPACER
NAS43DD3-64FC
(REMOVE)
K
(BEFORE MODIFICATION)
> SPIRAL
WRAP
(REF)
K
(AFTER MODIFICATION)
(VIEW LOOKING AFT, LH ENGINE, NAC FS 180.00)
View C-C  K40-407102-001-03
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 3 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 14 of 28

### Page 15 (OCR)

LEARJET 40
SERVICE BULLETIN
G1-B
BUNDLE (+)
(REF)  CLAMP
MS21919WH12
(REMOVE)
CLAMP
MS21919WCH11
(1 REQUIRED)
BRACKET
SCREW  MS9592-387
NAS1802-3-9  (REF)
WASHER  CLAMP
NAS1149C0316R  MS21919WH10
NUT  OR
MS21042-3  MS21919WCH10
(REF)  (REF)
(VIEW LOOKING INBOARD, LH ENGINE)
Detail D
G1-B  SCREW
BUNDLE (+)  NAS1802-3-9
(REF)  WASHER
NAS1149C0316R
NUT
MS21042-3
(REF)
CLAMP  CLAMP
MS21919WH12  MS21919WH10
(REMOVE)  OR
CLAMP  MS21919WCH10
MS21919WCH11  (REF)
(1 REQUIRED)
CLAMP
MS21919WH16
OR
MS21919WCH16
(REF)
(VIEW LOOKING INBOARD, LH ENGINE)
Detail E
K40-407102-001-04
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 4 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 15 of 28

### Page 16 (OCR)

LEARJET 40
SERVICE BULLETIN
G1-B
BUNDLE (+)
(REF)  CLAMP
MS21919WH12
SCREW
NAS1802-3-9
(REMOVE)
CLAMP
NUT  MS21919WCH11
MS21042-3  SCREW
WASHER  NAS1802-3-8
NAS1149C0316R  (1 EACH REQUIRED)
(REF)
CLAMP
MS21919WH10
OR
MS21919WCH10
(REF)
(VIEW LOOKING AFT, LH ENGINE)
(NAC FS 198.27)
View F-F
K40-407102-001-05
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 5 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 16 of 28

### Page 17 (OCR)

LEARJET 40
SERVICE BULLETIN
G1-B
BUNDLE (+)
(REF)  CLAMP
MS21919WH12
(REMOVE)
CLAMP
BRACKET  MS21919WCH11
MS9592-014  (1 REQUIRED)
(REF)
SCREW
NAS1802-3-8
WASHER
NAS1149C0316R  CLAMP
NUT  MS21919WH10
MS21042-3  OR
(REF)  MS21919WCH10
(REF)
(VIEW LOOKING AFT, LH ENGINE, NAC FS 209.15)
View G-G
G1-B
BUNDLE (+)
SCREW
(REF)
AN3-4A
NUT
BRACKET  4526200032-001  2651029-1  (REF)  (1 REQUIRED)  BRACKET  MS9592-387
(REF)
(G1)
(G1P1)  CLAMP (G1-B)
(G3P2)  MS21919WCH11
CLAMP (G1-E)
MS21919WCH10
SCREW
NAS1802-3-8
G1-E  WASHER
BUNDLE (-)  NAS1149C0316R
(REF)  NUT
MS21042-3
(1 REQUIRED)
VIEW LOOKING FOWARD,
LH ENGINE, NAC FS 186.00)  View J-J
View H-H  K40-407102-001-06
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 6 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 17 of 28

### Page 18 (OCR)

LEARJET 40
SERVICE BULLETIN
FUEL TUBE ASSEMBLY  (SUPPLY)  4573100005-013  (REMOVE)  4573100000V12-001  (1 REQUIRED)  / FUEL TUBE ASSEMBLY  (MOTIVE FLOW)  4528200044-001  (REMOVE)  4573100000V13-001  (1 REQUIRED)  CLAMP (HARNESS)  MS21919WCH6  CLAMP (HYDRAULIC LINE)  MS21919WCH4  SCREW  NAS1802-3-8  NUT  MS21042-3  (REF)
NAC  FS 180.00  SPIRAL  WRAP  (REF)
CLAMP (HARNESS)  MS21919WCH5  CLAMP (OIL LINE)  MS21919WCH4  SCREW  NAS1802-3-8  NUT  MS21042-3  (1 EACH REQUIRED)  HYDRAULIC  WIRE  LINE  HARNESS  (REF)  G3P1  (REF)  (VIEW LOOKING OUTBOARD, LH ENGINE)  View K-K
PYLON  (REF)  NAC  FS 200.00  CLAMP (HARNESS)  MS21919WCH5  CLAMP (OIL LINE)  MS21919WCH4  SCREW  NAS1802-3-8  MS21042-3  (1 EACH REQUIRED)
OIL LINE  (REF)
(REF)
NAC  FS 220.00
K40-407102-001-07
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 7 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 18 of 28

### Page 19 (OCR)

LEARJET 40
SERVICE BULLETIN
TUBE ASSEMBLY  цз0→
LH HYDRAULIC PUMP
CASE DRAIN
4529101090-001
(REMOVED)
4529101090-005
(1 REQUIRED)
View L-L
K40-407102-001-08
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 8 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 19 of 28

### Page 20 (OCR)

LEARJET 40
SERVICE BULLETIN
CLAMP
M85052/3-6  HYDRAULIC
CLAMP  TUBE
M85052/3-8
4529101067-001
SCREW  (REF)
NAS1802-3-7
NUT
MS21042-3  HYDRAULIC
(1 REQUIRED)  TUBE
4529101075-005
(REF)
2.00 IN
[5.08 CM]
HYDRAULIC
TUBE
4529101071-001
(REF)
> Detail L
NOTES
Wrap alternator wire harness (G3P1) with fiberglass tape at the bracket locations.
Spiral wrap using MIL-I-22129 or equivalent.
Excess length of the starter/generator wire bundle may be taken up in this area.
Tie wire harness together as required with MIL-T-43435E string tie and
secure tie string with insulation varnish.
Inspect hydraulic tubes in this area for chafing, if tubing is chafed
beyond acceptable limits, replace tubing. (Refer to Learjet Maintenance Manual, Chapter 20)
It required, replace fuel tubes that create an interference
condition with the adjacent hydraulic tubes.
• Aircraft 45-2001 thru 45-2026.
Required on aircraft that have not installed the 4529101090-005 left engine hydraulic pump case
drain tube per Learjet Service Bulletin No. A40-29-03.
K40-407102-001-09
Left Engine Wire Harness Routing and Clamping
Figure 1 (Sheet 9 of 9)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 20 of 28

### Page 21 (OCR)

LEARJET 40
SERVICE BULLETIN
NAC  NAC
FS  FS
200.00  209.15
NAC
WL
100.00
PYLON
(REF)
HYDRAULIC PUMP  MOTIVE FLOW  FUEL
(REF)  PUMP  PUMP
(REF)  (REF)
View A-A
NOTE
Notes information is found
on the last sheet of this figure.
K40-407102-002-01
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 1 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 21 of 28

### Page 22 (OCR)

LEARJET 40
SERVICE BULLETIN
NAC
NAC  FS
NAC  IFS  NAC  NAC 195.70
FS  186.50  FS  FS
180.00  C D 189.40  195.70
F I→G  H
(G3P1)
(G3P2)
(G1)  - G
(G1P1)
(REF)
Detail B
K40-407102-002-02
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 2 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 22 of 28

### Page 23 (OCR)

LEARJET 40
SERVICE BULLETIN
CLAMP
CLAMP  MS21919WH4
MS21919WH12  CLAMP
BRACKET  MS21919WH5
MS9592-010  SCREW
(REMOVE)  NAS1802-3-8
(REMOVE, 2 PLACES)
CLAMP
MS21919WH12
(REMOVE)
(BEFORE MODIFICATION)
CLAMP
MS21919WCH11
BRACKET
AN743-C12  ALTERNATOR
(1 REQUIRED)  G3P1
(REF)
ALTERNATOR
G3P2
(REF)
CLAMP  CLAMP
MS21919WCH11  MS21919WCH5
(1 REQUIRED)  BRACKET
MS9592-010
NUT
MS21042-3
(1 REQUIRED)
SCREW
NAS1802-3-8
(AFTER MODIFICATION)  (2 REQUIRED)
(VIEW LOOKING FORWARD, RH ENGINE, NAC FS 180.00)
View C-C
K40-407102-002-03
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 3 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 23 of 28

### Page 24 (OCR)

LEARJET 40
SERVICE BULLETIN
RAIL
ASSEMBLY
(REF)
SCREW
AN3-4A
WASHER  RAIL
2651029-1  ASSEMBLY
WASHER  (REF)
NAS1149C0316R
NUT
MS21042-3
(BEFORE MODIFICATION)  (REF)
E  BRACKET
MS9592-010
CLAMP  (1 REQUIRED)
MS21919WCH9
SCREW
NAS1802-3-8
NUT
MS21042-3  E
(1 REQUIRED)
(AFTER MODIFICATION)
(NAC FS 186.50)
View D-D
RETAINED HARDWARE
(REF)
WASHER
ENGINE  (GREEN)
FLANGES  (REF)
(REF)
G1P1 AND G1
(REF)
G3P1, G3P2
ALTERNATOR
(REF)
(NAC FS 186.50, HARDWARE STACKUP)
View E-E
K40-407102-002-04
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 4 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 24 of 28

### Page 25 (OCR)

LEARJET 40
SERVICE BULLETIN
RAIL
ASSEMBLY
— (REF)
BRACKET
MS9592-010
(REF)
G1P1 AND G1
(REF)
CLAMP
MS21919WH8
G3P1, G3P2 /  (REMOVE)
ALTERNATOR
(REF)  CLAMP
MS21919WH7
(REMOVE)
(BEFORE MODIFICATION)
RAIL
ASSEMBLY
- (REF)
RETAINED HARDWARE
(REF)
G3P1, G3P2
ALTERNATOR,
AND G1P1 AND G1
(REF)
BRACKET  ~ CLAMP
MS9592-010  MS21919WCH9
(REF)  (1 REQUIRED)
(AFTER MODIFICATION)
(NAC FS 186.50, VIEW LOOKING AFT AT RH ENGINE)
View F-F
K40-407102-002-05
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 5 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 25 of 28

### Page 26 (OCR)

LEARJET 40
SERVICE BULLETIN
RAIL  BRACKET
ASSEMBLY  MS9592-010
(REF)  (REF)
CLAMP
_ MS21919WH12
(REMOVE
CLAMP
MS21919WH10
(REF)
(BEFORE MODIFICATION)
BRACKET
MS9592-010
RAIL  (1 REQUIRED)
ASSEMBLY
(REF)  CLAMP
MS21919WH11
• (1 REQUIRED)
G1-B (+)
(REF)
• G1-E (-)
RETAINED
(REF)
HARDWARE
(REF)  CLAMP
MS21919WH10
(REF)
(AFTER MODIFICATION)
(NAC FS 189.50, STARTER/GENERATOR CLAMP)
View G-G
K40-407102-002-06
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 6 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 26 of 28

### Page 27 (OCR)

LEARJET 40
SERVICE BULLETIN
CLAMP
RAIL  MS21919WH12
ASSEMBLY  (REMOVE)
(REF)
CLAMP
MS21919WH10
(REF)
(BEFORE MODIFICATION)
RETAINED
HARDWARE
(REF)
CLAMP
RAIL  MS21919WCH11
ASSEMBLY  (1 REQUIRED)
(REF)
CLAMP
MS21919WH10
(REF)
(AFTER MODIFICATION)
(NAC FS 195.70, STARTER/GENERATOR CLAMP)
View H-H
K40-407102-002-07
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 7 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 27 of 28

### Page 28 (OCR)

LEARJET 40
SERVICE BULLETIN
RAIL
ASSEMBLY
(REF)
BRACKET
CLAMP  MS9552-022
MS21919WH8  (REF)
(REMOVE)
RAIL
CLAMP  ASSEMBLY
MS21919WH7  (REF)
(REMOVE)  RETAINED
HARDWARE_
(REF)
G3P1, G3P2
G1P1 AND G1  ALTERNATOR  BRACKET
(REF)  (REF)  MS9552-022
(REF)
(BEFORE MODIFICATION)
CLAMP
MS21919WCH9
(1 REQUIRED)
G3P1, G3P2 ALTERNATOR
AND G1P1 AND G1
(REF)
(AFTER MODIFICATION)
(NAC FS 195.50, ALTERNATOR CLAMP)
View J-J
NOTES
> Spiral wrap using MIL-I-22129 or equivalent.
> Tie wire harness together as required with MIL-T-43435E string tie
and secure tie string with insulation varnish.
K40-407102-002-08
Right Engine Wire Harness Routing and Clamping
Figure 2 (Sheet 8 of 8)
Basic Issue: Feb 13/07  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 40-71-02
www.cic.bombardier.com  Page 28 of 28

### Page 29

SERVICE BULLETIN COMPLIANCE RESPONSE 
 
It is necessary that Bombardier Learjet re cord aircraft having complied with this 
Service Bulletin.  Please fill in the Se rvice Bulletin and aircraft information below, 
sign and date the form in the space provided,  fold on dotted lines, seal with tape, 
and mail completed form to Bombardier  Learjet Maintenance Engineering.  If 
mailed within the United States, this form may be mailed to Bombardier Learjet 
Maintenance Engineering using business reply mail (see reverse). This form may 
be faxed or e-mailed if preferred. (See mailing information provided.) 
WARRANTY - Completion of this response form is required in order to process 
the warranty claim.  Therefor e, if a warranty allowance is provided in the Service 
Bulletin, return a copy of this form with the warranty claim. 
SMART PARTS  - Completion of this response form is required in order to 
remain, enroll, or re-enroll in the Smart Parts Program. 
 
b
 
 
 
 
 
Mailing Information: 
 
 
Bombardier Learjet  
Maintenance Engineering  
(MS #78) (FAX 316 946-2305) 
fracas_usa@aero.bombardier.com 
Customer Support 
Learjet, Inc. 
 
Service Bulletin Information  Aircraft Information 
Service Bulletin No. 40-71-02  Model  
Rev No. Basic Date February 13, 2007  Serial No.  
Service Facility Information  Flight Hours  
Facility Incorporating Bulletin   Landings  
 
 
Compliance Information 
The above referenced Service Bulletin was complied with on the referenced serial number aircraft at the listed aircraft flight 
hours/landings: 
 
Actual hours to accomplish Service Bulletin:  Access _______  SB _______  Test(s) _______  Restore _______ 
 
Signature  Title  Date  
 
Comments

### Page 30 (OCR)

-Y FOLD HERE FIRST
NO POSTAGE
BOMBARDIER  NECESSARY
IF MAILED
IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 2928  WICHITA KS
POSTAGE WILL BE PAID BY ADDRESSEE
ATTN: MAINTENANCE ENGINEERING (MS #78)
LEARJET INC
PO BOX 7707
WICHITA KS 67277-9801
....  • FOLD HERE LAST, SEAL WITH TAPE. DO NOT STAPLE

### Page 31

SERVICE BULLETIN EVALUATION SHEET 
 
 
YOUR COMMENTS WILL HELP US IMPROVE OUR 
SERVICE BULLETINS 
 
b
 
 
 
 
 
 
 
SERVICE BULLETIN 40-71-02 REVISION: Basic DATED: February 13, 2007 
TITLE: Modification of the Left and Right Engine Wire Routing and Clamping 
  
LEARJET CONTACT INFORMATION TELEPHONE:  (316) 946-2421  FACSIMILE:  (316) 946-2002 
HOW EASY IS THE BULLETIN TO UNDERSTAND?  POOR FAIR  GOOD VERY 
GOOD 
EXCELLENT 
COMMENTS       
      
 
DOES THE BULLETIN TELL YOU ALL YOU NEED TO 
KNOW ABOUT THE JOB? 
      
COMMENTS       
      
 
DO YOU THINK THE BULLETIN CONVEYS THE BEST 
WAY TO DO THE JOB? 
      
COMMENTS       
      
 
HOW REALISTIC ARE THE LABOR-HOUR ESTIMATES?       
COMMENTS       
      
 
WHAT IS YOUR APPRECIATION OF THE ILLUSTRATION 
(S), FIGURE (S) AND/OR KIT DRAWING (S)? 
      
COMMENTS       
      
 
Actual hours to accomplish Service Bulletin:  Access _______  Modify _______  Test(s) _______  Restore _______ 
 
PLEASE SUPPLY THE FOLLOWING 
DATA: 
 NAME:  
OPERATOR:   TELEPHONE:  
AIRCRAFT:   FACSIMILE:  
UPON COMPLETION OF THE EVALUATION FORM, PLEASE FAX TO (316) 946-2002 OR FOLD AND RETURN TO 
ADDRESS ON THE REVERSE SIDE.

### Page 32 (OCR)

Y FOLD HERE FIRST
NO POSTAGE
BOMBARDIER  NECESSARY
IF MAILED
IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 2928  WICHITA KS
POSTAGE WILL BE PAID BY ADDRESSEE
ATTN: TECHINCAL PUBLICATIONS (MS #53)
LEARJET INC
PO BOX 7707
WICHITA KS 67277-9801
• FOLD HERE LAST, SEAL WITH TAPE. DO NOT STAPLE

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
