# Bombardier Service Bulletin 60-78-7

Copy: Revision 2 ("U.S. DOT/FAA - SBT 60-78-7 R2"), 30 pages: PDF https://openairdocs.org/files/sha256/f6/bd/f6bd3fe5fa62abc8e5b79ae4030aafb23b1b2e47e2e0bbea2a96b554bee74ab6; text https://openairdocs.org/service-documents/bombardier/sb-60-78-7/file/f6bd3fe5fa62.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2013-0214; AD 2013-13-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 60-78-7
- Latest revision known: 60-78-7, Revision 2, dated May 1, 2006 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-60-78-7

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2013-13-09](https://openairdocs.org/ad/2013-13-09.md), effective Aug 6, 2013: Revisions 1 and 2

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-60-78-7/proposed.md).

## Text (30 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2013-0214; AD 2013-13-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

BOMBARDIER
LEARJET 60
RECOMMENDED
SBT 60-78-7
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
This page transmits Revision 2 to Service Bulletin 60-78-7, "Installation of Thrust Reverser Interface Box."
Rework:
No rework is required for aircraft which have complied with previous issues of this Service Bulletin.
Reason:
Revised the planning information as follows:
In paragraph 1.H., moved the wheel speed detect box assembly information from the material required
table to the other materials necessary table.
In paragraph 1.H., moved T/R interface box information from the material required table to the other
Added paragraph 1.H.(1), other material/parts necessary to do this service bulletin table.
In paragraph 1.H.(1), added wheel speed detect box assembly information to the table.
In paragraph 1.H.(1), added T/R interface box information to the table.
In paragraph 1.H.(1), revised the note to add the phone number for customers outside of North Amer-
ica.
In paragraph 1.H.(1), added a note for the alternate part number for the wheel speed detect box
assembly.
Revised the accomplishment information as follows:
In Figure 1, sheet 1 of 3, added the alternate part number for the wheel speed detect box.
In Figure 1, sheet 1 of 3, changed the ground plug callout from 148C to 148E.
In Figure 2, sheet 1 of 2, changed the ground plug callout from 148C to 148E in wire diagram.
In Figure 2, sheet 1 of 2, changed the electrical code from 148C to 148E in flagnote 5.
In Figure 2, sheet 2 of 2, changed the ground plug callout from 148C to 148E in wire diagram.
Revised material information as follows:
In paragraph 3.A.(1), changed wire specification for C98B22 wire from M27500-22SD-3T23 to
M27500-22SD-2T23.
In paragraph 3.B., added alternate part number for the wheel speed detect box assembly to the parts
removed list table.
THIS SERVICE BULLETIN IS AVAILABLE AT:  SBT 60-78-7
www.cic.bombardier.com  Page 1 of 2
May 1/06

### Page 2 (OCR)

LEARJET 60
SERVICE BULLETIN
Filing Instructions:
This is a COMPLETE revision. Remove and discard all pages of the prior issue and replace with pages of
Revision 2.
Record of Revisions:
ISSUE  DISTRIBUTION DATE
Basic  Feb 21/05
Revision 2  May 1/06
THIS SERVICE BULLETIN IS AVAILABLE AT:  SBT 60-78-7
www.cic.bombardier.com  Page 2 of 2
May 1/06

### Page 3 (OCR)

BOMBARDIER
LEARJET 60
RECOMMENDED
SB 60-78-7
SERVICE BULLETIN
To ensure proper compliance with this Service Bulletin, owners and operators of affected aircraft modified by
STC should contact the STC holder or their regional FAA office for additional information and disposition.
CONTACT INFORMATION  DISTRIBUTION  REV.
DATE  NO.
Business Aircraft  May 1, 2006  2
Learjet Inc.
MS 53
P.O. Box 7707
Wichita, Kansas 67277-7707
(316) 946-2421
EXHAUST - INSTALLATION OF THRUST REVERSER INTERFACE BOX
1. Planning Information
A. Effectivity
(1) Learjet 60-002 thru 60-276.
NOTE:  On applicable aircraft, Learjet Service Bulletin 60-27-6, "Installation of Autospoiler-
Wheel Speed Detection System" must be performed prior to or in conjunction with this
Service Bulletin. Owners and operators should check the Service Bulletin effectivity
against their aircraft serial number to determine if their aircraft is impacted.
B. Reason
(1) To install a wheel speed input to the thrust reverser system to reduce the possibility of inadvertent
stowing during thrust reverser operation.
C. Description
(1) This bulletin modifies the aircraft as follows.
(a) Installs brackets to secure thrust reverser interface box.
(b) Installs thrust reverser interface box.
(c) Modifies wiring for the new thrust reverser interface box.
D. Compliance
(1) Recommended - It is recommended that this Service Bulletin be complied with no later than the
next 600 flight hours or within 12 months from the original distribution date of this Service Bulletin,
February 21, 2005.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 1 of 23

### Page 4 (OCR)

LEARJET 60
SERVICE BULLETIN
E. Approval
(1) FAA approval has been obtained on technical data in this publication that affects airplane type
design.
(2) EASA approval has been obtained on technical data in this publication that affects airplane type
design.
F. Labor Hours - Estimated Accomplishment Time
-801
TASK
KIT
5.0  Labor hours to gain access to affected area.
25.0  Labor hours to modify aircraft.
20.0  Labor hours to functional test/operational check.
15.0  Labor hours to restore aircraft to airworthy status.
65.0  Total Labor Hours
NOTE:  The above labor hour estimate is for planning purposes only. Facility and/or personnel
capabilities may cause actual accomplishment time to vary significantly.
G. Expense Coverage
(1) Labor Coverage
(a) Aircraft in service 0-5 years - 100% coverage.
(b) Aircraft in service years 6 thru 8 - 50% coverage.
(c) Aircraft in service years 9 thru 12 - 25% coverage.
(2) Material Coverage
(a) Aircraft in service 0-5 years - 100% coverage.
(b) Aircraft in service years 6 thru 8 - 50% coverage.
(c) Aircraft in service years 9 thru 12 - 25% coverage.
(3) Smart Parts - Smart Parts Plus does not pay for the materials during or after the free period for
those aircraft in service 0-5 years at the time of service bulletin distribution. For those aircraft in
service greater than 5 years at the time of service bulletin distribution Smart Parts Plus pays for
the chargeable portion of the materials in accordance with the above prorated table applicable to
the aircraft at the time of service bulletin distribution.
H. Material Required to Accomplish Service Bulletin.
PART NUM-  QTY  NOMENCLATURE  PRICING
BER
6081046-801  1  Service Bulletin Kit  $ 1,154.00
NOTE:  The above selling price is subject to change without notice.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 2 of 23

### Page 5 (OCR)

LEARJET 60
SERVICE BULLETIN
(1) Other material/parts necessary to do this service bulletin.
PART NUM-
BER  QTY  NOMENCLATURE  NOTES
6018366-005 *  1  Box Assembly, Wheel Speed Detect (E410)  (** See Note Below)
6018003-001  T/R Interface Box (E465)  (** See Note Below)
NOTE:  * 6081044-805 is a spare for 6018366-005.
** The wheel speed detect box assembly and T/R interface box are rotatable components.
Contact Bombardier Aerospace Parts Logistics Business Aircraft Customer Service at 1-
888-222-1428 in North America or 1-316-946-2377 outside North America for information
for availability and pricing.
To place an order for these parts, please call Bombardier Aerospace Parts Logistics Busi-
ness Aircraft Customer Service at 1-888-222-1428 in North America or 1-316-946-2377
outside North America for information.
I. Tooling
(1) Acquire the necessary tools and equipment.
PART  MANUFAC-
NAME  QTY  USAGE
NUMBER  TURER
External Hydraulic Power  1  Obtain Locally  Drive T/Rs and Spoilers
Source (1500 PSI)
Squat Switch  2  Fabricate  Close squat switch.
Simulator Sticks
Ground Power Unit  GPU  1
Spoiler Cage  TN61341  2  Learjet Inc.  Protect personnel from
Wichita, KS  spoilers.
Stopwatch  1  Commercially  General
Available
Spin Adapter  2571004-1  1  Learjet Inc.  To adapt the drill to the
Wichita, KS  transducer.
Drill Motor (two [2]  2  Commercially  To simulate aircraft
Reqd.) (Speeds of 1700 to  Available  ground speed.
2000 гpm.)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 3 of 23

### Page 6 (OCR)

LEARJET 60
SERVICE BULLETIN
J. Weight and Balance
(1) Change in basic weight and moment.
CHANGE IN BASIC WEIGHT  CHANGE IN BASIC MOMENT
Plus (+) 1.35 pounds  Plus (+) 488.2 inch-pounds
K. References
(1) Learjet Maintenance Manual, Chapters 7, 12, 24, 25, 27, and 29.
(2) Learjet Wiring Manual, Chapter 20.
L. Other Publications Affected
(1) Learjet Illustrated Parts Catalog, Chapter 27.
(2) Learjet Wiring Manual, Chapters 27, 32, and 78.
2. Accomplishment Instructions
A. Gain Access
(1) Jack the aircraft so that the landing gear clears the ground. (Refer to Learjet Maintenance Manual,
Chapter 7.)
(2) Set battery switches) off and disconnect aircraft batteries.
(3) Open aft cabin baggage compartment closet door.
NOTE:  If removal of closet door is preferred, refer to Learjet Maintenance Manual, Chapter
25.
(4) The aft cabin baggage compartment floor liner panel is secured by hook and loop fasteners on all
edges.
(5) Pull to release hook and loop fasteners and remove floor liner panel from aircraft.
(6) Remove all attaching hardware from left side liner panel assembly.
(7) Remove left side liner panel assembly from aircraft.
B. Modification of Aircraft
(1) Remove the wheel speed detect box assembly (E410) from the aircraft. Retain attaching hard-
ware. (Refer to Learjet Maintenance Manual, Chapter 27.)
(2) Return wheel speed detect box assembly (E410) to Learjet. (Refer to paragraph 3.B for return
shipping information.)
(3) Install new wheel speed detect box assembly (E410) to aircraft with retained hardware.
(4) Determine location of 6018004-803 bracket to stringer 10L as follows:
(a) Position and clamp bracket to stringer 10L. (See Figure 1.)
(b) Using a 0.1250 inch [ 3.18 mm ] drill bit, drill six (6) fastener holes through bracket and stringer
10L.
(5) Determine location of 6018004-804 bracket to stringer 11L as follows:
(a) Position and clamp bracket to stringer 11L. (See Figure 1.)
(b) Using a 0.1250-inch [3.18 mm] drill bit, drill six (6) fastener holes through bracket and stringer
11L.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 4 of 23

### Page 7 (OCR)

LEARJET 60
SERVICE BULLETIN
(6) Position the T/R Interface box on 6018004-803 and 6018004-804 brackets and clamp in place.
(See Figure 1.)
(7) Mark T/R Interface box mounting hole pattern on the 6018004-803 and 6018004-804 brackets.
(8) Ensure proper edge distances and that locations are not in bend radius of brackets.
(9) Remove T/R Interface box from brackets.
(10) Remove 6018004-803 and 6018004-804 brackets from stringers.
(11) Drill No. 12 (.189 diameter) hole at marked location on 6018004-803 and 6018004-804 brackets.
(12) Deburr holes on both sides of the brackets.
(13) Deburr holes drilled in stringers 10L and 11L.
(14) Install nutplates to new 6018004-803 and 6018004-804 brackets as follows.
(a) Position nutplate to bracket and mark nutplate fastener hole locations.
(b) Drill fastener holes in brackets.
(c) Electrically bond nutplate to brackets, (Refer to Learjet Wiring Manual, Chapter 20.)
(d) Install nutplate to bracket using MS20426AD3-2 rivets.
(15) Install 6018004-803 bracket to stringer 10L as follows.
(a) Electrically bond all holes drilled. (Refer to Learjet Wiring Manual, Chapter 20.)
(b) Clean stringer 10L and the 6018004-803 bracket using MPK or equivalent and cheesecloth.
(c) Wipe remaining MPK from stringer 10L and bracket using lint-free cloth.
(d) Secure the 6018004-803 bracket to stringer 10L using MS20470AD4-3 rivets. (See Figure 1.)
(16) Install 6018004-804 bracket to stringer 11L as follows.
(a) Electrically bond all holes drilled. (Refer to Learjet Wiring Manual, Chapter 20.)
(b) Clean stringer 11L and the 6018004-804 bracket using MPK or equivalent and cheesecloth.
(c) Wipe remaining MPK from stringer 11L and bracket using lint-free cloth.
(d) Secure the 6018004-804 bracket to stringer 11L using MS20470AD4-3 rivets. (See Figure 1.)
(17) Install T/R Interface box to bracket with MS27039-0806 screws. (See Figure 1.)
(18) Modify aircraft wiring. (See Figure 2.
NOTE:  Route the new wiring with the existing wire bundle.
Permissible to secure new wiring to existing wiring using tie wraps at each clamp loca-
tion. (See Figure 2.)
C. Perform Functional Test/Operational Check
(1) Functional Test - Model 60 Thrust Reverser with Wheel Speed Detect Interface - Ground Test
(a) PRE-TEST PROCEDURE FOR T/R GROUND TESTS ENGINES NOT RUNNING
1) Place the aircraft on jacks. (Refer to Learjet Maintenance Manual, Chapter 7)
2) Release the parking brake.
3) Connect the electrical ground power cart. (Refer to Learjet Maintenance Manual, Chapter
24.)
4) Connect the hydraulic ground power cart. (Refer to Learjet Maintenance Manual, Chapter
NOTE:  The following thrust reverser operating checks are performed with the
engines not running and system hydraulic power supplied by a hydraulic
mule. A suitable AC outlet must be available to power the Hydraulic Mule.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 5 of 23

### Page 8 (OCR)

LEARJET 60
SERVICE BULLETIN
5) Insert squat switch simulator sticks into the right and left squat switches (S1 thru S4) to
simulate ground mode (weight on wheels).
6) Set the T/R Cont, Auto Stow, Warn. Lts., EEC and Squat Switch Circuit Breakers.
(b) RT SQUAT SWITCH FIRST OFF GROUND
1) Deploy one thrust reverser at a time, waiting for the hydraulic power cart to re-stabilize at
full pressure between T/R deployments.
2) With both thrust reversers deployed, set the right squat switch to the flight mode and verify
the following.
a) Assure that a major engine fault (amber lamp) for each engine is set.
b) The amber engine fault lamps will remain ON through step 2.C.1.(e).5).
c) Assure that both thrust reversers stow and that the armed lamps flash until both thrust
reversers are stowed, and extinguish when the thrust reversers are stowed.
3) Set the left squat switch to the flight mode.
4) Assure that a minor engine fault (white lamp) for each engine is set.
5) The white engine fault lamps will also remain ON through step 2.C.1. (e)5).
(c) RT SQUAT SWITCH FIRST LANDING
1) Set the left thrust reverser lever to STOW.
2) Set the right squat switch to ground mode.
3) Assure that both thrust reversers remain stowed.
4) Set the left squat switch to ground mode.
5) Verify that the right thrust reverser deploys.
(d) LT SQUAT SWITCH FIRST OFF GROUND
1) With the right thrust reversers deployed, set the left squat switch to the flight mode.
2) Assure that the right thrust reverser stows and that the armed lamp flashes until the thrust
reverser is stowed, and extinguish when thrust reverser is stowed.
3) Set the right squat switch to the flight mode.
(e) LT SQUAT SWITCH FIRST LANDING
1) Set the left squat switch to ground mode.
2) Verify that both thrust reversers remain stowed.
3) Set the right thrust reverser lever to STOW.
4) Set the left thrust reverser lever to DEPLOY.
5) Set the right squat switch to ground mode.
6) Verify that the left thrust reverser deploys.
7) Set the left thrust reverser lever to STOW.
8) Verify that the left thrust reverser begins to stow.
9) Verify the left TR DEPLOY annunciator extinguishes and the left engine T/R UNLOCK
annunciator illuminates during transition.
10) Verify after the left thrust reverser is fully stowed, that the left engine T/R UNLOCK annun-
ciator extinguishes and both T/R ARM annunciators remain illuminated.
(f) THRUST REVERSER WHEEL SPEED INTERFACE GROUND TEST ENGINES NOT RUN-
NING.
1) Verify the aircraft is on jacks with the nose and main gear clearing the ground in the
DOWN position.
2) Verify the parking brake is in the released position.
3) Set BATTERY 1 and BATTERY 2 switches OFF.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 6 of 23

### Page 9 (OCR)

LEARJET 60
SERVICE BULLETIN
4) If not previously accomplished remove the hubcap from each wheel, exposing each wheel
speed transducer.
5) Verify the left and right squat switches are set to the ground mode.
WARNING:  KEEP CLEAR OF THE THRUST REVERSERS AT ALL TIMES. THE
THRUST REVERSERS MAY OPEN OR CLOSE AT ANY TIME WITHOUT
WARNING, WHEN HYDRAULIC POWER IS AVAILABLE.
6) Apply electrical ground power to the aircraft. (Refer to Learjet Maintenance Manual, Chap-
ter 24.)
7) Apply hydraulic ground power to the aircraft. (Refer to Learjet Maintenance Manual, Chap-
ter 29.)
8) Verify hydraulic pressure is normal (1500 - 1550 PSI).
9) Set both throttles to the idle position.
10) Verify both green T/R ARM annunciators are illuminated and the SPOILER MON annunci-
ator is extinguished.
11) Set the spoiler lever to the ARM position.
12) Verify the green SPOILER ARMED annunciator is illuminated.
13) Set both squat switches to the flight mode.
14) Verify both green T/R ARM annunciators extinguish.
15) Rotate the SYSTEM TEST switch to the SPOILER RESET position and press the TEST
button. Upon release verify the left and right T/R ARM annunciators do not illuminate.
16) Allow the left and right squat switches to remain in flight mode for 3 minutes minimum.
17)  Set the Left and Right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
18) Move the left thrust reverser lever to DEPLOY.
19) Verify that when the left thrust reverser is fully deployed, the left T/R DEPLOY annunciator
illuminate and the left T/R UNLOCK annunciator extinguishes.
20) Spin the left outboard and right outboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
21) Within 40 seconds after setting the squat switches to ground mode, set the right squat
switch to flight mode and stop the stopwatch while continuing to spin the left outboard and
right outboard wheel speed transducers.
22) Verify the left thrust reverser remains deployed.
23) Stop spinning the left outboard wheel speed transducer.
24) Verify the left thrust reverser remains deployed.
25) Stop spinning the right outboard wheel speed transducer.
26) Verify after a 2 ‡ 1 second delay, the left thrust reverser begins to stow.
27) Verify the left thrust reverser is fully stowed.
28)  Set the left thrust reverser lever to STOW.
29) Allow the left and right squat switches to remain in flight mode for 3 minutes minimum.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 7 of 23

### Page 10 (OCR)

LEARJET 60
SERVICE BULLETIN
30) Set the left and right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
31) Set the right thrust reverser lever to DEPLOY.
32) Verify that when the right thrust reverser is fully deployed, the right T/R DEPLOY annunci-
ator illuminates and the right T/R UNLOCK annunciator extinguishes.
33) Spin the left outboard and right outboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
34) Within 40 seconds of setting the squat switches to ground mode set the right squat switch
to flight mode and stop the stopwatch while continuing to spin the left outboard and right
outboard wheel speed transducers.
35) Verify the right thrust reverser remains deployed.
36) Stop spinning the left outboard wheel speed transducer.
37) Verify the right thrust reverser remains deployed.
38) Stop spinning the right outboard wheel speed transducer.
39) Verify after a 2 ‡ 1 second delay, the right thrust reverser begins to stow.
40) Verify the right thrust reverser fully stows.
41) Set the right thrust reverser lever to STOW position.
42) Set the left squat switch to flight mode. Maintain flight mode with both squat switches for 3
minutes minimum.
43) Set the left and right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
44) Move the left thrust reverser lever to DEPLOY.
45) Verify that when the left thrust reverser is fully deployed, the left T/R DEPLOY annunciator
illuminates and the left T/R UNLOCK annunciator extinguishes.
46) Spin the left outboard and right outboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
47) Within 40 seconds of setting the squat switches to ground mode, set the right squat switch
to flight mode and stop the stopwatch while continuing to spin the left outboard and right
outboard wheel speed transducers.
48) Verify the left thrust reverser remains deployed.
49) Stop spinning the right outboard wheel speed transducer.
50) Verify the left thrust reverser remains deployed.
51) Stop spinning the left outboard wheel speed transducer.
52) Verify after a 2 ‡ 1 second delay, the left thrust reverser begins to stow.
53) Verify the left thrust reverser fully stows.
54) Set the left thrust reverser lever to STOW.
55) Set the left squat switch to flight mode. Maintain flight mode with both squat switches for 3
minutes minimum.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 8 of 23

### Page 11 (OCR)

LEARJET 60
SERVICE BULLETIN
56) Set the Left and Right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
57) Move the right thrust reverser lever to DEPLOY.
58) Verify that when the right thrust reverser is fully deployed that the right T/R DEPLOY
annunciator illuminates and the right T/R UNLOCK annunciator extinguishes.
59) Spin the left outboard and right outboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
60) Within 40 seconds of setting the squat switches to ground mode set the right squat switch
to flight mode and stop the stopwatch while continuing to spin the left outboard and right
outboard wheel speed transducers.
61) Verify the right thrust reverser remains deployed.
62) Stop spinning the right outboard wheel speed transducer.
63) Verify the right thrust reverser remains deployed.
64) Stop spinning the left outboard wheel speed transducer.
65) Verify after a 2 ‡ 1 second delay, the right thrust reverser begins to stow.
66) Verify the right thrust reverser is fully stowed.
67) Set the right thrust reverser lever to STOW.
68) Set the right squat switch to flight mode. Maintain flight mode with both squat switches for
3 minutes minimum.
69) Set the left and right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
70) Set the right thrust reverser lever to DEPLOY.
71) Verify that when the right thrust reverser is fully deployed that the right T/R DEPLOY
annunciator illuminates and the right T/R UNLOCK annunciator extinguishes.
72) Spin the left inboard and right inboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
73) Within 40 seconds of setting the squat switches to ground mode, set the left squat switch
to flight mode and stop the stopwatch while continuing to spin the left inboard and right
inboard wheel speed transducers.
74) Verify the right thrust reverser remains deployed.
75) Stop spinning the left inboard wheel speed transducer.
76) Verify the right thrust reverser remains deployed.
77) Stop spinning the right inboard wheel speed transducer.
78) Verify after a 2 + 1 second delay, the right thrust reverser begins to stow.
79) Verify the right thrust reverser is fully stowed.
80) Set the right thrust reverser lever to STOW.
81) Set the right squat switch to flight mode. Maintain flight mode with both squat switches for
3 minutes minimum.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 9 of 23

### Page 12 (OCR)

LEARJET 60
SERVICE BULLETIN
82) Set the left and right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
83) Set the left thrust reverser lever to DEPLOY.
84) Verify that when the left thrust reverser is fully deployed, that the left T/R DEPLOY annun-
ciator illuminates and the left T/R UNLOCK annunciator extinguishes.
85) Spin the left inboard and right inboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
86) Within 40 seconds of setting the squat switches to ground mode, set the left squat switch
to flight mode and stop the stopwatch while continuing to spin the left inboard and right
inboard wheel speed transducers.
87) Verify the left thrust reverser remains deployed.
88) Stop spinning the left inboard wheel speed transducer.
89) Verify the left thrust reverser remains deployed.
90) Stop spinning the right inboard wheel speed transducer.
91) Verify after a 2 + 1 second delay, the left thrust reverser begins to stow.
92) Verify the left thrust reverser is fully stowed.
93) Set the left thrust reverser lever to STOW.
94) Set the left squat switch to flight mode. Maintain flight mode with both squat switches for 3
95) Set the left and right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
96) Set the right thrust reverser lever to DEPLOY.
97) Verify that when the right thrust reverser is fully deployed that the right T/R DEPLOY
annunciator illuminates and the right T/R UNLOCK annunciator extinguishes.
98) Spin the left inboard and right inboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
99) Within 40 seconds of setting the squat switches to ground mode set the left squat switch
to flight mode and stop the stopwatch while continuing to spin the left inboard and right
inboard wheel speed transducers.
100) Verify the right thrust reverser remains deployed.
101) Stop spinning the right inboard wheel speed transducer.
102) Verify the right thrust reverser remains deployed.
103) Stop spinning the left inboard wheel speed transducer.
104) Verify after a 2 + 1 second delay, the right thrust reverser begins to stow.
105) Verify the right thrust reverser is fully stowed.
106) Set the right thrust reverser lever to STOW.
107) Set the left squat switch to flight mode. Maintain flight mode with both squat switches for 3
minutes minimum.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 10 of 23

### Page 13 (OCR)

LEARJET 60
SERVICE BULLETIN
108) Set the left and right squat switches to ground mode.
a) Start the stopwatch when the switches are set.
b) Set both squat switches to ground mode as close to the same time as possible.
109) Set the left thrust reverser lever to DEPLOY.
110) Verify that when the left thrust reverser is fully deployed that the left T/R DEPLOY annun-
ciator illuminates and the left T/R UNLOCK annunciator extinguishes.
111) Spin the left inboard and right inboard wheel speed transducers to fast drill speed.
NOTE:  Fast drill speed range is from 1100 RPM to 2000 RPM.
112) Within 40 seconds of setting the squat switches to ground mode set the left squat switch
to flight mode and stop the stopwatch while continuing to spin the left inboard and right
inboard wheel speed transducers.
113) Verify the left thrust reverser remains deployed.
114) Stop spinning the right inboard wheel speed transducer.
115) Verify the left thrust reverser remains deployed.
116) Stop spinning the left inboard wheel speed transducer.
117) Verify after a 2 ‡ 1 second delay, the left thrust reverser begins to stow.
118) Verify the left thrust reverser is fully stowed.
119) Set the left thrust reverser lever to STOW.
(2) Functional Test of the Spoiler System
(a) Perform the following test to check thrust reverser interface box operations with the spoiler
system.
1) Verify the aircraft is on jacks with the nose and main gear clearing the ground in the
DOWN position. (Refer to Learjet Maintenance Manual, Chapter 7.)
2) Install the spoiler cages over the spoilers.
3) Connect an external electrical power source to the aircraft. (Refer to Learjet Maintenance
Manual, Chapter 24.
4) Connect external hydraulic power source to aircraft. (Refer to Learjet Maintenance Man-
ual, Chapter 24.)
5) Set the battery switches on.
6) Set the inverter switches on.
7) Pressurize hydraulic system to 1,500 (‡ 50) psi [10,342 (+345) kPa].
8) Ensure both squat switches are in flight mode.
9) Extend flaps to 20 degrees and set both throttles above IDLE.
10) Set squat switches to ground mode and start stopwatch when squat switches are set. Set
both squat switches to ground mode as close to the same time as possible.
11) Within 45 seconds after performing step 2.C.(2)(a)10), set both throttles to IDLE and set
spoiler lever to ARM.
12) Verify that Spoilers extend, SPOILER ARM and SPOILER EXT annunciators shall illumi-
13) Wait for 20 seconds after the completion of step 2.C. (2)(a)10).
14) Set both throttles above IDLE for 5 seconds and return throttles to IDLE.
Spoilers shall retract, SPOILER ARM annunciator shall remain illuminated, and SPOILER
EXT annunciator shall extinguish.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 11 of 23

### Page 14 (OCR)

LEARJET 60
SERVICE BULLETIN
16) Using drill motors, spin LH inboard and RH outboard wheels to fast drill speed.
NOTE:  Fast drill speed is between 1100 to 2000 rpm. If identical drill motors are not
available, regulate the fast motor to match the slower motor using a strobe
light.
17) Spoilers shall extend, SPOILER ARM annunciator shall remain illuminated, SPOILER
EXT annunciator shall illuminate, and SPOILER MON annunciator shall be extinguished.
18) Reduce wheel speed to zero (0).
19) Advance both throttles above IDLE.
20) Spoilers shall retract.
21) Return both throttles to IDLE.
22) SPOILER ARM annunciator shall remain illuminated, SPOILER EXT annunciator shall
extinguish, and SPOILER MON annunciator shall be extinguished.
23) Repeat steps 2.C.(2)(a)16) thru 22), except spin the LH outboard and RH inboard wheels
to fast drill speed
24) Set squat switches to flight mode.
NOTE:  Perform steps 2.C.(2)(a)24) thru 30) within 1.5 minutes of setting squat
switches to flight mode.
25) Spin left outboard and right inboard wheels to fast drill speed.
26) Verify that spoilers are retracted, SPOILER ARM annunciator is illuminated, and SPOILER
EXT and SPOILER MON annunciators are extinguished.
27) Push the spoileron Reset/Test Switch.
28) Verify that spoilers do not extend upon release of switch.
29) Verify SPOILER ARM annunciator is illuminated, and SPOILER EXT and SPOILER MON
annunciators are extinguished.
30) Reduce wheel speed to zero (0).
31) Wait 2 minutes, 15 seconds after starting step 2.C.(2)(a)24).
32) Spin the outboard wheels to fast drill speed.
NOTE:  Fast drill speed is between 1100 to 2000 rpm. If identical drill motors are not
available, regulate the fast motor to match the slower motor using a strobe
33) Verify that spoilers are not extended, SPOILER ARM annunciator is illuminated, and
SPOILER EXT and SPOILER MON annunciators are extinguished.
34) Reduce wheel speed to zero (0).
35) Advance both throttles above IDLE and return to IDLE.
36) Spin inboard wheels to fast drill speed.
37) Verify that spoilers are not extended, SPOILER ARM annunciator is illuminated, and
SPOILER EXT and SPOILER MON annunciators are extinguished.
38) Reduce wheel speed to zero (0).
39) Advance both throttles above IDLE and return to IDLE.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 12 of 23

### Page 15 (OCR)

LEARJET 60
SERVICE BULLETIN
40) Spin the left inboard and outboard wheels to fast drill speed.
41) Verify that spoilers extend, SPOILER ARM and SPOILER EXT annunciators illuminate,
and SPOILER MON annunciator is extinguished.
42) Reduce wheel speed to zero (0).
43) Advance both throttles above IDLE and verify that spoilers retract.
44) Return throttles to IDLE.
45) Verify SPOILER ARM annunciator is illuminated, and SPOILER EXT and SPOILER MON
annunciators are extinguished.
46) Spin right inboard and outboard wheels to fast drill speed.
47) Verify that spoilers extend, SPOILER ARM and SPOILER EXT annunciators are illumi-
nated, and SPOILER MON annunciator is extinguished.
48) Reduce wheel speed to zero (0).
49) Advance both throttles above IDLE and verify that spoilers retract.
50) Return throttles to IDLE.
51) Verify that SPOILER ARM annunciator is illuminated, and SPOILER EXT and SPOILER
MON annunciators are extinguished.
52) Spin the right inboard and left outboard wheels to fast drill speed.
53) Verify that spoilers extend, SPOILER ARM and SPOILER EXT annunciators are illumi-
nated, and SPOILER MON annunciator is extinguished.
54) Reduce wheel speed to zero (0).
55) Advance both throttles above IDLE and verify that spoilers retract.
56) Return throttles to IDLE.
57) Verify that SPOILER ARM annunciator is illuminated and the SPOILER EXT and
SPOILER MON annunciators are extinguished.
58) Set right squat switch to ground mode.
59) Within 45 seconds, spin left inboard wheel to fast drill speed.
60) Verify that spoilers extend, SPOILER ARM and SPOILER EXT annunciators are illumi-
nated, and SPOILER MON annunciator is extinguished.
61) Reduce wheel speed to zero (0).
62) Standby for 56 seconds after performing step 2.C.(2)(a)58), advance both throttles above
IDLE and verify that spoilers retract.
63) Return throttles to IDLE.
64) Verify SPOILER ARM annunciator is illuminated, and SPOILER EXT and SPOILER MON
annunciators are extinguished.
65) Standby for one minute after step 2.C.(2)(a)58), spin the left outboard wheel to fast drill
66) Verify spoilers do not extend, SPOILER ARM annunciator is illuminated, and SPOILER
EXT and SPOILER MON annunciators are extinguished.
67) Reduce wheel speed to zero (0).
68) Advance both throttles above IDLE and return throttles to IDLE.
69) Spin left inboard wheel to fast drill speed.
70) Verify spoilers do not extend, SPOILER ARM annunciator is illuminated, and SPOILER
EXT and SPOILER MON annunciators are extinguished.
71) Reduce wheel speed to zero (0).
72) Advance both throttles above IDLE and return throttles to IDLE.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 13 of 23

### Page 16 (OCR)

LEARJET 60
SERVICE BULLETIN
73) Spin both left inboard and left outboard wheels to fast drill speed.
74) Verify that spoilers extend, SPOILER ARM and SPOILER EXT annunciators are illumi-
nated, and SPOILER MON annunciator is extinguished.
75) Reduce wheel speed to zero.
76) Complete the following steps within 45 seconds.
a) Set left squat switch to ground mode.
b) Set right squat switch to flight mode.
Advance both throttles above IDLE.
d) Verify spoilers retract.
e) Return both throttles to IDLE.
f) Verify the SPOILER ARM is illuminated.
g)  Verify the SPOILER EXT is extinguished.
n)  Verify the SPOILER MON is extinguished.
i) Spin both right inboard and right outboard wheels to fast drill speed.
j) Verify spoilers remain retracted.
k) Verify the SPOILER ARM is illuminated.
I) Verify the SPOILER EXT is extinguished.
m) Verify the SPOILER MON is extinguished.
77) Reduce wheel speed to zero.
78) Standby 2 minutes, fifteen seconds after step 2.C.(2)(a)76).
79) Advance both throttles above IDLE and then back to IDLE.
80) Spin both the left inboard and left outboard wheels to fast drill speed.
81) Verify that spoilers extend.
82) Verify that the SPOILER ARM and SPOILER EXT annunciators are illuminated.
83) Verify that the SPOILER MON annunciator is extinguished.
84) Reduce wheel speed to zero (0).
85) Set right squat switch to ground mode.
86) Within 45 seconds of setting the right squat switch to ground mode, advance throttles
above IDLE.
87) Verify spoilers retract.
88) Set both throttles to IDLE.
89) Verify that the SPOILER ARM annunciator is illuminated, and SPOILER EXT and
SPOILER MON annunciators are extinguished.
90) Set spoiler lever to RET.
91) Verify that the SPOILER ARM, SPOILER EXT and SPOILER MON annunciators are
extinguished.
(3) Functional Test of the Asymmetric Squat Switch Monitor
(a) Perform the following test to check the asymmetric squat switch monitor system operation.
1) Set the right squat switch to flight mode.
2) Advance both throttles above IDLE and return to IDLE.
3) Wait 3 minutes and set spoiler lever to ARM.
4) Verify the SPOILER ARM annunciator is extinguished.
5) Set the right squat switch to ground mode.
6) Verify that spoilers extend, and the SPOILER ARM annunciator is illuminated.
7) Wait 18 seconds, set both throttles above IDLE, and verify spoilers retract.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 14 of 23

### Page 17 (OCR)

LEARJET 60
SERVICE BULLETIN
8) Return both throttles to IDLE.
9) Set the spoiler lever to RETRACT, and verify the SPOILER ARM annunciator is extin-
guished.
10) Set the left squat switch to flight mode.
11) Advance both throttles above IDLE and return to IDLE.
12) Wait 3 minutes and set spoiler lever to ARM.
13) Verify the SPOILER ARM annunciator is extinguished.
14) Set the left squat switch to ground mode.
15) Verify that spoilers extend, and the SPOILER ARM annunciator is illuminated.
16) Wait 18 seconds, set both throttles above IDLE, and verify spoilers retract.
17) Return both throttles to IDLE.
18) Set the spoiler lever to RETRACT.
(4) Functional Test of the Wheel Speed Mode Engagement
(a) Perform the following test to check the wheel speed mode engagement.
1) Set the spoiler lever to ARM.
2) Verify that spoilers extend, and the SPOILER ARM annunciator is illuminated.
3) Advance both throttles above IDLE and verify spoilers retract.
4) Return both throttles to IDLE.
5) Set spoiler lever to RETRACT, and verify the SPOILER ARM annunciator is extinguished.
6) Set the spoiler lever to ARM.
7) Verify that spoilers extend, and the SPOILER ARM annunciator is illuminated.
8) Set the spoiler lever to RETRACT.
9) Verify spoilers retract and SPOILER ARM annunciator is extinguished.
(5) Functional Test of the Spoiler Reset System
(a) Perform the following test to check the spoiler system in the SPOILER RESET position.
1) Set both throttles to IDLE.
2) Set spoiler lever to ARM and verify the spoilers extend within 2 seconds.
3) Verify the SPOILER ARM and SPOILER EXT annunciators are illuminated.
4) Rotate the SYSTEM TEST switch to SPOILER RESET, and depress and hold the TEST
5) Verify the spoilers retract within 1 second.
6) Verify the SPOILER MON annunciator is illuminated, and the SPOILER ARM and
SPOILER EXT annunciators are extinguished.
7) Release the TEST switch.
8) Verify that spoilers extend, SPOILER ARM and SPOILER EXT annunciators are illumi-
nated, and SPOILER MON annunciator is extinguished.
9) Depress and release the TEST switch.
NOTE:  Upon depressing the TEST switch, the spoilers will retract.
10) Verify the spoilers are extended and the SPOILER EXT annunciator is illuminated.
11) Set the left throttle above IDLE.
12) Verify the spoilers retract, the SPOILER ARM annunciator is illuminated, and the
SPOILER EXT annunciator is extinguished.
13) Return the left throttle to IDLE and verify the spoilers remain retracted.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 15 of 23

### Page 18 (OCR)

LEARJET 60
SERVICE BULLETIN
14) Repeat steps 2.C.(5)(a) 9) thru 13) for the right throttle.
15) Set the right throttle to the MCR detent.
16) Extend the spoilers, and verify the takeoff aural warning horn sounds.
17) Retract the spoilers.
18) Depressurize the hydraulic system. (Refer to Learjet Maintenance Manual, Chapter 29.)
19) Remove the aircraft from jacks (Refer to Learjet Maintenance Manual, Chapter 7.)
20) Disconnect external hydraulic power source from aircraft. (Refer to Learjet Maintenance
Manual, Chapter 29.)
21) Check hydraulic reservoir fluid levels. (Refer to Learjet Maintenance Manual, Chapter 12.)
22) Set inverter switches off.
23) Set battery switches off.
24) Disconnect external electrical power.
25) Remove spoiler cages.
D. Restore Aircraft to Airworthy Status
(1) Install left side liner panel assembly to aircraft.
(2) Install floor liner panel to aircraft.
(3) Close aft cabin baggage compartment closet door.
E. Complete the attached Compliance Response Form and return as soon as possible.
F. Complete aircraft maintenance records in accordance with FAR 43.9.
3. Material Information
A. Parts Required
NOTE:  The 6081046-801 Kit contains the following parts.
PART NUMBER  QTY  NOMENCLATURE  NOTES
D-436-36  2  Splice
D-142-51  Solder Sleeve
MS27039-0806  4  Screw
MS21075L08N  4  Nutplate
M85049/38-S13N  1  Backshell (P1131)
MS20470AD4-3  12  Rivet
MS20426AD3-2  Rivet
M39029/58-363  4  Pin  Used on J5.
M39029/56-351  14  Socket  Used on P5 and P1131.
M39029/32-259  4  Socket  Used on P718 and P719.
D38999/26KC98SN  1  Plug (P1131)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 16 of 23

### Page 19 (OCR)

LEARJET 60
SERVICE BULLETIN
PART NUMBER  QTY  NOMENCLATURE  NOTES
6018004-804  Bracket
6018004-803  Bracket
6081046-803  Wire Kit
NOTE:  The actual quantity for hardware contained in the kit may be greater than the quantity
shown in the parts list as hardware may be supplied in pre-packaged quantities.
(1) The 6081046-803 wire kit contains the following parts.
PART NUMBER OR  NOMENCLATURE OR
WIRE CODE  QTY  WIRE SPECIFICATION  NOTES
C249A22N  5 FT.  M22759/34-22-9
C250A22N  5 FT.  M22759/34-22-9
K304A22  10 FT.  M22759/34-22-9
K305A22  10 PT.  M22759/34-22-9
K306A22  10 FT.  M22759/34-22-9
K307A22  10 FT.  M22759/34-22-9
K304B22  25 FT.  M22759/34-22-9
K305B22  25 FT.  M22759/34-22-9
K306B22  25 FT.  M22759/34-22-9
K307B22  25 FT.  M22759/34-22-9
C98B22  10 FT.  M27500-22SD-2T23
NOTE:  The actual quantity for hardware contained in the kit may be greater than the quantity
shown in the parts list as hardware may be supplied in pre-packaged quantities.
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 17 of 23

### Page 20 (OCR)

LEARJET 60
SERVICE BULLETIN
B. Parts Removed List
PART NUMBER  QT  Y  NOMENCLA-  TURE  DISPOSI-  TION  EFFECTIVITY  REPLACED  BY
6018367V1-001 or  1  Wheel Speed  Return to  60-002 thru  6018366-005 or
6018367V2-001 or  Detect Box (E410)  Learjet  60-276  6081044-805
6018366-004 or
6081044-801
(1) Parts Identified in the "Parts Removed List" with a return to Learjet disposition must be returned
within 20 days to avoid late penalty fees. Contact Bombardier Aerospace Parts Logistics Business
Aircraft Customer Service at 1-888-222-1428 to obtain a Material Return Authorization.
(2) Parts identified in the "Parts Removed List" with a return to Learjet disposition, may be shipped to
the following address:
RETURN SHIPPING ADDRESS
Bombardier Aerospace
251-A Wille Road
Des Plaines, IL 60018
USA
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 18 of 23

### Page 21 (OCR)

LEARJET 60
SERVICE BULLETIN
0006E
FS
(REP)  PS  (REF)  CLAMP  (REF)  356.61
WHEEL SPEED
DETECTION BOX (E410)
6018366-005 OR 6081044-805
(1 REQUIRED)
++ 70+7
T/R INTERFACE BOX (E465)
6018003-001
(1 REQUIRED)
AFT PRESSURE  148E
BULKHEAD  (REF)
(REF)
BAGGAGE
COMPARTMENT
FLOOR
(REF)
(VIEW LOOKING OUTBOARD)  FWD I→
NOTES  Detail A
Electrically bond per Learjet Model 60 wiring manual.
If correct part number wheel speed detect box (E410) is installed, it is not required
to remove and replace unit.
K60-607807-001-01
Wiring Modification of Circuit Breaker Panel Connectors
Figure 1 (Sheet 1 of 3)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 19 of 23

### Page 22 (OCR)

LEARJET 60
SERVICE BULLETIN
C
BRACKET
6018004-803
(1 REQUIRED)
000  C
SCREW  STRINGER 11L
MS27039-0806  D  (REF)
(4 REQUIRED)  NUTPLATE  MS21075L08N
(4 PLACES)
D
BRACKET
6018004-804
RIVET  (1 REQUIRED)
MS20426AD3-2
(8 PLACES)
FWDI  T/R INTERFACE BOX
(REF)
Detail B
K60-607807-001-02
Wiring Modification of Circuit Breaker Panel Connectors
Figure 1 (Sheet 2 of 3)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 20 of 23

### Page 23 (OCR)

LEARJET 60
SERVICE BULLETIN
RIVET  BRACKET  FS
(6 REQUIRED)  MS20470AD4-3  6018004-803  (REF)  (REF)  STRINGER 10L  356.61  (REF)
0.35 in
[0.89 mm]
0.31 in
2.63 in  - [0.79 mm]
[6.68 cm]
3.45 in
0.31 in  [8.76 cm]
[0.79 mm]
View C-C  FWDI
RIVET  BRACKET  FS
MS20470AD4-3  6018004-804  STRINGER 11L  356.61
(6 REQUIRED)  (REF)  (REF)  (REF)
0.35 in
[0.89 mm]
0.31 in
2.63 in  - [0.79 mm]
[6.68 cm]
3.72 in
0.31 in  [9.44 cm]
[0.79 mm]
• View D-D  FWD I
NOTE
Drill holes through bracket and stringer together.
K60-607807-001-03
Wiring Modification of Circuit Breaker Panel Connectors
Figure 1 (Sheet 3 of 3)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 21 of 23

### Page 24 (OCR)

LEARJET 60
SERVICE BULLETIN
E289  LH THRUST  REV RELAY  BÔY  E290  REV RELAY  1 SO SW GND BOX  M39029/32-259  Represents existing components and/or wires  Represents deleted components and/or wires  K60-607807-002-01
SOCKET  M39029/32-259  2 PLACES  I L SQ SW GND  IR SQ SW GND  O SW GND  SOCKET  2 PLACES  Represents new or rerouted wires  Represents continued wires  Represents a splice location
SQUAT SW  RELAY PANEL  M39029/58-363  4 PLACES
BLKHD  PIN  LEGEND
E465  BOX  R WHEEL SPD IN  G76A22  L T/R SQUAT SW IN  R T/R SQUAT SW IN  GND  L T/R SOUAT SW OUT  L T/R SQUAT SW OUT  WHEEL SPEED  DETECTOR  L. SQ. OUT  R. SQ. OUT  SOCKET  M39029/56-351  4 PLACES  (Aircraft 60-002 thru 60-040)  Unshielded portion of wire and shield termination not to exceed 3 inches.  Route installed wiring with existing bundle from P719 and P718 to J5.  Ensure that new wiring is routed through all clamps and sleeving.  Permissable to disconnect wiring from P5, reidentify and reroute to P1131,  E465 T/R Interface box instead of routing new wiring.  Permissable to reterminate and reidentify existing wiring in lieu of running new  wires as long as sufficient wire lengths exist to eliminate splice.  On plug 148E, it is permissable to use different pin locations if specified
PLUG  D38999/  26KC98SN  BACKSHELL  M85049/  38-S13N  80822] W-  1M 0250A220  SPLICE  D-436-36  2 PLACES  pin locations are already filled.
SOCKET  M39029/56-351  10 PLACES  TO E156  SPOILERON-  COMPUTER  SOLDER SLEEVE  D-142-51  3 PLACES  NOTES
Wiring Diagram
Figure 2 (Sheet 1 of 2)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 22 of 23

### Page 25 (OCR)

LEARJET 60
SERVICE BULLETIN
E289  LH THRUST  REV RELAY  BOX  E290  AH THRUST  REV RELAY  BOX  K60-607807-002-02
GND  SW  GND  SW GND
sQ  M39029/32-259
SOCKET  M39029/32-259  2 PLACES  SOCKET  2 PLACES
COЛ4B22  K305B22  PIN  M39029/58-363  4 PLACES  Represents existing components and/or wires  Represents deleted components and/or wires
K95A22  <307A22  K305A22  SOCKET  M39029/56-351  4 PLACES  (Aircraft 60-041 thru 60-276)  Represents new or rerouted wires  Represents continued wires  Represents a splice location
E465  R WHEEL SPD IN  L WHEEL SPD IN  L T/R SQUAT SW IN  R T/R SQUAT SW IN  - GND  L T/R SQUAT SW OUT  R T/R SQUAT SW OUT  R T/R SQUAT SW OUT  L T/R SQUAT SW OUT  É41õ  WHEEL SPEED  DETECTOR  IL SQ. OUT  R. SO. OUT  LEGEND  174+644
P1131  P1005
C98B22  C249A22N  C250A221  SPLICE  D-436-36  2 PLACES
PLUG  D38999/  26KC98SN  BACKSHEL  M85049/  38-S13N  SOCKET  M39029/56-351  10 PLACES  TO E156  OILERON- "  COMPUTER  SOLDER SLEEVE  D-142-51  3 PLACES
Wiring Diagram
Figure 2 (Sheet 2 of 2)
Basic Issue: Feb 21/05  THIS SERVICE BULLETIN IS AVAILABLE AT:  SB 60-78-7
Revision 2: May 1/06  www.cic.bombardier.com  Page 23 of 23

### Page 26 (OCR)

SERVICE BULLETIN COMPLIANCE RESPONSE  BOMBARDIER
It is necessary that Bombardier Learjet record aircraft having complied with this
Service Bulletin. Please fill in the Service Bulletin and aircraft information below,
sign and date the form in the space provided, fold on dotted lines, seal with tape,
and mail completed form to Bombardier Learjet Maintenance Engineering. If
mailed within the United States, this form may be mailed to Bombardier Learjet  Mailing Information:
Maintenance Engineering using business reply mail (see reverse). This form may
be faxed or e-mailed if preferred. (See mailing information provided.)  Bombardier Learjet
WARRANTY - Completion of this response form is required in order to process  Maintenance Engineering
the warranty claim. Therefore, if a warranty allowance is provided in the Service  (MS #78) (FAX 316 946-2305)
Bulletin, return a copy of this form with the warranty claim.  fracas_usa@aero.bombardier.com
SMART PARTS - Completion of this response form is required in order to  Customer Suppor
remain, enroll, or re-enroll in the Smart Parts Program.  Learjet, Inc.
Service Bulletin Information  Aircraft Information
Service Bulletin No. 60-78-7  Model
Rev No. 2  Date May 1, 2006  Serial No.
Service Facility Information  Flight Hours
Facility Incorporating Bulletin  Landings
Compliance Information
The above referenced Service Bulletin was complied with on the referenced serial number aircraft at the listed aircraft flight
hours/landings:
Actual hours to accomplish Service Bulletin: Access  SB _  _ Test(s)  Restore
Signature  Title  Date
Comments

### Page 27 (OCR)

Y FOLD HERE FIRST
NO POSTAGE
BOMBARDIER  NECESSARY
IF MAILED
IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 2928  WICHITA KS
POSTAGE WILL BE PAID BY ADDRESSEE
ATTN: MAINTENANCE ENGINEERING (MS #78)
LEARJET INC
PO BOX 7707
WICHITA KS 67277-9801
A FOLD HERE LAST, SEA  APE. DO NOT STAPLE

### Page 28 (OCR)

SERVICE BULLETIN EVALUATION SHEET  BOMBARDIER
YOUR COMMENTS WILL HELP US IMPROVE OUR
SERVICE BULLETINS
SERVICE BULLETIN  60-78-7  REVISION:  2  DATED:  May 1, 2006
TITLE: Installation of Thrust Reverser Interface Box
LEARJET CONTACT INFORMATION  TELEPHONE: (316) 946-2421  FACSIMILE: (316) 946-2002
HOW EASY IS THE BULLETIN TO UNDERSTAND?  POOR  FAIR GOOD  VERY  EXCELLENT
GOOD
COMMENTS
DOES THE BULLETIN TELL YOU ALL YOU NEED TO
KNOW ABOUT THE JOB?
COMMENTS
DO YOU THINK THE BULLETIN CONVEYS THE BEST
WAY TO DO THE JOB?
COMMENTS
HOW REALISTIC ARE THE LABOR-HOUR ESTIMATES?
COMMENTS
WHAT IS YOUR APPRECIATION OF THE ILLUSTRATION
(S), FIGURE (S) AND/OR KIT DRAWING (S)?
COMMENTS
Actual hours to accomplish Service Bulletin: Access _  Modify  Test(s) .  Restore
PLEASE SUPPLY THE FOLLOWING  NAME:
DATA:
OPERATOR:  TELEPHONE:
AIRCRAFT:  FACSIMILE:
UPON COMPLETION OF THE EVALUATION FORM, PLEASE FAX TO (316) 946-2002 OR FOLD AND RETURN TO
ADDRESS ON THE REVERSE SIDE.

### Page 29 (OCR)

FOLD HERE FIRST
NO POSTAGE
BOMBARDIER  NECESSARY
IF MAILED
IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 2928  WICHITA KS
POSTAGE WILL BE PAID BY ADDRESSEE
ATTN: TECHINCAL PUBLICATIONS (MS #53)
LEARJET INC
PO BOX 7707
WICHITA KS 67277-9801
• FOLD HERE LAST,  SEAL WITH TAPE. DO NOT STAPLE

### Page 30

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
