# Bombardier Service Bulletin 604-28-022

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 3 ("604_28_022R3"), 15 pages: PDF https://openairdocs.org/files/sha256/73/c8/73c84b4f100c48788f59e8798aa098f850ec8adc3a66f2e8126f990707b4635c; text https://openairdocs.org/service-documents/bombardier/sb-604-28-022/file/73c84b4f100c.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2021-0725; AD 2021-26-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- SB 604-28-022 ("SB 604-28-022"), 11 pages: PDF https://openairdocs.org/files/sha256/96/66/96667ed2883b93b44ab51ff9ee112389d00290380b332f764b1682978385c178; text https://openairdocs.org/service-documents/bombardier/sb-604-28-022/file/96667ed2883b.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0521; AD 2017-22-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 604-28-022
- Latest revision known: 604-28-022, Revision 3, dated August 31, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-604-28-022

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-26-23](https://openairdocs.org/ad/2021-26-23.md), effective Feb 25, 2022: Revision 3
- [AD 2017-22-06](https://openairdocs.org/ad/2017-22-06.md), effective Nov 30, 2017: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/bombardier/sb-604-28-022/proposed.md).

## Text (15 pages)

Revision 3, the newest copy. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2021-0725; AD 2021-26-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Revision 02 of this Service Bulletin dated May 14, 2018 and replace in its
entirety with this Revision 03.
Service Bulletin No. 604−28−022
Date of Basic Issue Oct 19/2015
Revision No. 01 Dated Nov 03/2017
Revision No. 02 Dated May 14/2018
Revision No. 03 Dated Aug 31/2018
This Service Bulletin contain special check instructions and must be repeated every
600 flight hours or 12 months, whichever comes first.
This revision is issued to update the instructions applicable for this Service Bulletin. The
changes are as follows:
1. Add Retroactive action.
2. Change in Paragraph 1.K., to update the new revision of the Restriction and/or Special
Instruction (RSI), C−4127, Rev. F.
3. Change in Paragraph 2.A.(4), to clarify the refuel step.
4. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL CL−600−2B16
604−28−022
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

SPECIAL CHECK - STANDBY FUEL FEED SYSTEM AND AUXILIARY POWER UNIT
(APU) FUEL FEED SYSTEM - ENGINE AND APU ELECTRICAL FUEL PUMP
CARTRIDGE/CANISTER FUEL LEAKAGE
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Refer to Paragraph 1.D.
EFFECTIVITY: A/C Serial No. 5301 to 5665
MANPOWER: 5 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE NOYES
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE NOYES
PREREQUISITE SERVICE BULLETINS: N/A
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL CL−600−2B16
ATA 28−23, 28−24
FUEL
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 1 of 1
This Service Bulletin is available at:

### Page 3

SPECIAL CHECK - STANDBY FUEL FEED SYSTEM AND AUXILIARY POWER UNIT
(APU) FUEL FEED SYSTEM - ENGINE AND APU ELECTRICAL FUEL PUMP
CARTRIDGE/CANISTER FUEL LEAKAGE
RETROACTIVE ACTION
THE ACTION THAT FOLLOWS IS RECOMMENDED FOR AIRCRAFT ON WHICH
THE BASIC ISSUE OF THIS SERVICE BULLETIN WAS DONE:
Perform the Revision 03 of this Service Bulletin within 4 months or 150 Flight Hours
from Service Bulletin release date Revision 03 or 12 months from the last inspection of
the Basic Issue. Whichever comes first.
And continue the repetitive inspections of this Service Bulletin (Revision 03) per the
Compliance in PARA 1.D.
NO RETROACTIVE ACTION IS REQUIRED FOR AIRCRAFT ON WHICH THE
REVISION 01 OR REVISION 02 OF THIS SERVICE BULLETIN WAS DONE.
1. PLANNING INFORMATION
NOTES:1 . Before you do this bulletin, examine all STC, STA or equivalent
action changes to make sure that this bulletin can be completed.
2. In order to incorporate this Service Bulletin, you must order the following
O−rings: Part No’s MS29513−034, MS29513−118 and MS29513−142 (for
cartridge Part No. 226114−3). And Part No’s M25988/3−034,
M25988/3−118 and M25988/3−142 (for cartridge Part No. P99C25−603).
Refer to Paragraph 3.B.
3. Make sure to complete and submit Appendix 1.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL CL−600−2B16
ATA 28−23, 28−24
FUEL
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2015−2018 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 1 of 11
This Service Bulletin is available at:

### Page 4

A. Effectivity
CL−600−2B16 aircraft, Serial No. 5301 to 5665.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
B. Reason
There have been reported fuel leaks in engine and APU electrical fuel pump
cartridge/canister electrical connectors and conduits.
This Service Bulletin gives instructions to verify if there is any fuel leakage at the
RHS landing lights compartment from the APU electrical fuel pump conduit outlet,
and at FS 412.00, BL 0.0 from the RHS and LHS engine electrical fuel pump.
C. Description
This Service Bulletin gives instructions to:
− Do an inspection for any possible fuel leak from LHS or RHS electrical engine
pumps at the location of the one belly fairing screw, FS 412, BL 0.0 (approx.).
− Do an inspection for any possible fuel leak in the right landing lights
compartment from the APU electrical fuel pump conduit outlet,
− Remove the applicable boost pump cartridge to inspect and replace the three
o−rings,
− Do the necessary testing to make sure that there are no fuel leaks and that the
system operates correctly, and
− If there are any fuel leaks, contact Bombardier Aerospace Service Engineering
for further instructions by submitting a Service Request for Product Support
Action (SRPSA) by e−mail at: SRPSA@aero.bombardier.com.
D. Compliance
Recommended within 600 flight hours or 12 months, whichever comes first from the
Service Bulletin release date (Revision 01).
The inspection, must be repeated every 600 flight hours or 12 months, whichever
comes first.
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 2 of 11

### Page 5

E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTES: 1. The man−hours given are estimates to help you schedule the tasks
given in this bulletin. The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to
SB604−00−002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the man−hours and should be considered for
planning purposes before you schedule this Service Bulletin.
5 man−hours is necessary to do this special check.
Bombardier Aerospace does not pay for the labor to do this special check and the
repetitive special check.
G. Material − Cost and Availability
No kit is necessary to do this Special Check.
The parts listed in Paragraph 3.B are necessary to replace the O−rings for the
special check.
The parts required to do the Special Check and the repetitive Special Check are not
covered by Bombardier.
For those aircraft out of new aircraft warranty at the time of Service Bulletin
distribution, Smart Parts Plus pays for the parts for up to one year from the Service
Bulletin distribution date (Revision 01).
H. Tooling
No equipment or special tools are necessary.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 3 of 11

### Page 6

I. Weight and Balance
No change.
J. Electrical Load Data
No change.
K. References
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C−4127,
Rev. F.
− CL−604 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 28, 51 and 53.
− CL−604 Aircraft Illustrated Parts Catalog (AIPC), Chapters 20 and 51.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
− Appendix 1 − Information Feedback Sheet. (attached)
L. Other Publications Affected
None.
M. Equivalent Service Bulletins
For the Challenger 605 aircraft, use SB 605−28−010.
For the Challenger 650 aircraft, use SB 650−28−001.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the CL−604 Aircraft
Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
CL−604 AMM, Chapter 6.
A. Aircraft Setup
NOTE: The steps in the Aircraft Set−Up section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator discretion.
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey the fuel system safety precautions. Refer to AMM 28−00−00−910−801.
(3) Remove one belly fairing screw located at FS412.00, BL0.0 (approximately).
Keep the screw to re−install later. Refer to Figure 1.
(4) Refuel the LH, RH and Auxiliary tank to a minimum of 3,200 lbs in each tank.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 4 of 11

### Page 7

B. Special Check− Inspection of the Engines and APU Electric Fuel Pump
Cartridges/Canisters conduit area without removing the fairing
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
(1) Inspect the canister connector cavities and wiring conduits for fuel leakage as
per the steps that follow:
NOTE: The applicable fuel tank (Auxiliary tank for the RH and LH engine
electric fuel pumps and RH wing tank for APU electric fuel pump)
must contain a minimum of 3200 lbs. of fuel for the steps that follow.
(a) Please use Appendix 1 of this Service Bulletin to record your data from
this Special Inspection and send it via email:
BAG_BBAD_CL600_Program@aero.bombardier.com
(b) Install the wheel chocks at the nose and main landing gear wheels.
(c) Remove the RHS, LHS and APU fuel pump cartridges. Disregard any fuel
found in connector during cartridge removal. It is normal that the fuel will
splash into the connector during removal when aircraft is fueled. Clean
canister connector with approved contact cleaner. Refer to the table below
for applicable AMM references.
AMM REFERENCES
Cartridge Removal Cartridge Installation
LH Engine Pump AMM 28−23−02−000−801 AMM 28−23−02−400−801
RH Engine Pump AMM 28−23−02−000−801 AMM 28−23−02−400−801
APU Pump AMM 28−24−02−000−801 AMM 28−24−02−400−801
Wait a minimum of four hours, then visually inspect the canister connector
cavities and wiring conduits for fuel leakage.
(d) During the four hour wait time, continuously check the canister connectors
for leaks. This will provide data for the Information Feedback Sheet
(Appendix 1).
NOTE: It is sometimes difficult to detect a small leak. For a quick check,
place a colored paper shop towel inside the canister to help
identify a leak (color of paper towel will become darker when it
is wet).
(e) If there is evidence of a leak at the connector, the conduit must be purged
of fuel by blowing shop air into the outlet of the conduit in the locations that
follow:
(i) For APU boost pump, gain access to the conduit MPE1KD at the front
spar by removing the RH landing light lens.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 5 of 11

### Page 8

(ii) For LH engine boost pump, gain access to the conduit MPE1QA at
the front spar by removing the LH wing−to−fuselage, fwd fairing
(191BB).
(iii) For RH engine boost pump, gain access to the conduit MPE2QA at
the front spar by removing the RH wing−to−fuselage, fwd fairing
(192BB).
(f) Once you feel that the fuel is purged, clean the connector and repeat the
four hour leak check (Steps (e) and (f)).
(g) Visually inspect for any traces of fuel.
(h) If any fuel leakage reoccurs in the inspected areas, submit a Service
Request for Product Support Action (SRPSA) by e−mail at:
SRPSA@aero.bombardier.com for further instructions.
(i) If no fuel leakage is detected in the inspected areas do the steps that
follow:
(i) Remove the existing O−rings from the cartridges and install the new
O−rings.
(ii) The aircraft can continue to operate for up to 600 flight hours or 12
months, whichever comes first from the Service Bulletin release date
(Basic Issue). This inspection must be repeated every 600 flight hours
or 12 months, whichever comes first.
(j) Re−install the cartridges. Refer to the table in step 1.(c) for AMM
references.
(2) Inspect the wiring conduits for fuel leakage after operating the boost pumps as
per the steps that follow:
(a) Operate the RHS engine electric fuel pump for 15 minutes before
inspecting.
NOTE: Make sure the minimum fuel quantity in the applicable tank for
boost pump operation is 500 lbs.
(b) Visually inspect for traces of fuel coming from the RHS engine boost pump
at location of belly fairing screw (FS412, BL0.0). Refer to Figure 1.
NOTE: If there’s any fuel leakage from the RHS engine boost pump,
clean it before you operate the LHS engine boost pump.
(c) Operate the LHS engine electric fuel pump for 15 minutes before
inspecting.
(d) Visually inspect for traces of fuel coming from the LHS engine boost pump
at location of belly fairing screw (FS412, BL0.0). Refer to Figure 1.
(e) Visually inspect for traces of fuel coming from the transparent wiring
conduit at the APU Boost Pump conduit outlet by looking through the RHS
landing light compartment glass window. Refer to Figure 2.
(i) If fuel leakage is found make sure you record this data and submit the
data in an Service Request for Product Support Action (SRPSA) by
e−mail at: SRPSA@aero.bombardier.com.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 6 of 11

### Page 9

(f) Operate the APU electric fuel pump for 15 minutes minimum before
inspecting.
(g) Visually inspect for traces of fuel coming from the transparent wiring
conduit at the APU Boost Pump conduit outlet by looking through the RHS
landing light compartment glass window. Refer to Figure 2.
(h) If no fuel leakage is detected in the inspected areas proceed to the
Close−Out.
(i) If any fuel leakage reoccurs in the inspected areas, submit a Service
Request for Product Support Action (SRPSA) by e−mail at:
SRPSA@aero.bombardier.com for further instructions.
(3) Make sure you use the Appendix 1 to record the data found from the fuel leak
inspections, and send it via email:
BAG_BBAD_CL600_Program@aero.bombardier.com
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 7 of 11

### Page 10 (OCR)

OMBARDIL
CHALLENGER 604
MODEL CL-600-2B16
SCREW TO
BE REMOVED
VIEW A  SB604_2822_001
Location of Belly Fairing gurn Hole, FS 412.00, BL 0.0
Basic Issue: Oct 19/2015  604-28-022
I Revision 03: Aug 31/2018  Page 8 of 11

### Page 11 (OCR)

CHALLENGER 604  MBARDIE
MODEL CL-600-2B16
RIGHT LANDING
LIGHTS COMPARTMENT
FUEL LEAKAGE
LOCATION
MPE 1KD
APU BOOST PUMP
CONDUIT OUTLET
DSB2808_001
RHS Landing Lights Compartment - APU Electrical Pump Conduit
Figure 2
Basic Issue: Oct 19/2015  604-28-022
I Revision 03: Aug 31/2018  Page 9 of 11

### Page 12

C. Testing − Engines and/or APU Electric Fuel Pumps
(1) Test the re−installed LH and RH engine electric fuel pumps. Refer to
AMM 28−23−01−710−801.
(2) Test the re−installed APU electric fuel pump. Refer to
AMM 28−24−00−710−801.
D. Close−out
NOTE: The steps in the Close−Out section of this Service Bulletin, except for the
return−to−service tests, are recommended steps. The steps give a
recommendation to install components removed during the Aircraft
Set−up. This recommendation is to make sure that the aircraft is safe and
ready to return to service. Alternative steps can be used at the operator
discretion.
WARNING: FUEL IMBALANCE BETWEEN MAIN WING TANKS MUST BE
CORRECTED AT THE END OF THIS CHECK.  MOVING, TAXIING
OR TOWING THE AIRCRAFT WITH FUEL IMBALANCE
EXCEEDING 400 LBS IS PROHIBITED. IF YOU DO NOT DO THIS,
YOU CAN CAUSE INJURIES TO PERSONS AND/OR DAMAGE TO
EQUIPMENT.
WARNING: FUEL DISTRIBUTION MUST BE RESTORED PER AFM FUEL
LIMITATIONS (CHAPTER, 02-05). IF YOU DO NOT DO THIS, YOU
CAN CAUSE INJURIES TO PERSONS AND/OR DAMAGE TO
EQUIPMENT.
(1) Redistribute the fuel or refuel tanks to correct any fuel imbalance in the tanks,
per AFM fuel limitations.
(2) Install the belly fairing screw at FS412.00, BL0.0 location.
(3) Remove all tools, equipment and unwanted materials from the aircraft.
E. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback. Please take a moment to fill out our easy on−line Service
Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
No kit required.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 10 of 11

### Page 13

B. Parts
For cartridge Part No. 226114−3, the parts that follow are necessary to do this
Service Bulletin and are available from Bombardier Aerospace Parts Services,
Montreal:
NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
MS29513−034 1 Packing,O−Ring − −
MS29513−118 1 Packing,O−Ring − −
MS29513−142 1 Packing,O−Ring − −
For cartridge Part No. P99C25−603, the parts that follow are necessary to do this
Service Bulletin and are available from Bombardier Aerospace Parts Services,
Montreal:
NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
M25988/3−034 1 Packing,O−Ring − −
M25988/3−118 1 Packing,O−Ring − −
M25988/3−142 1 Packing,O−Ring − −
NOTE: The part numbers for the items listed above are subject to change without
revision to this Service Bulletin. In case of discrepancy between this list
and any other list, the Illustrated Parts Catalog prevails and shall be used
to determine the latest part number.
C. Material
No materials required.
D. Publications
No publications required.
MODEL CL−600−2B16
Basic Issue: Oct 19/2015
Revision 03: Aug 31/2018
604−28−022
Page 11 of 11

### Page 14

604−28−022 Rev. 03 Aug 31/2018
SPECIAL CHECK − STANDBY FUEL FEED SYSTEM AND AUXILIARY
POWER UNIT (APU) FUEL FEED SYSTEM − ENGINE AND APU
ELECTRICAL FUEL PUMP CARTRIDGE/CANISTER FUEL LEAKAGE
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 15

SERVICE BULLETIN INCORPORATION SHEET − "604−28−022"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
604−28−022 03
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
