# Bombardier Service Bulletin 605-27-005

Copy: Revision 01 ("SB 605-27-005 rev 1"), 22 pages: PDF https://openairdocs.org/files/sha256/4e/56/4e56296ac68007c16d8906b7adaad347c9e2bb0bcc30dac5ba8b171af1597905; text https://openairdocs.org/service-documents/bombardier/sb-605-27-005/file/4e56296ac680.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0028; AD 2018-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 605-27-005
- Latest revision known: 605-27-005, Revision 01, dated April 21, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-605-27-005

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-17-02](https://openairdocs.org/ad/2018-17-02.md), effective Sep 19, 2018: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-605-27-005/proposed.md).

## Text (22 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0028; AD 2018-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

605-27-005
Page 1 of 2
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
MODEL CL-600-2B16
Discard the Basic Issue of this Service Bulletin dated Feb 25/2013, and replace in its
entirety with this Revision 01.
Service Bulletin No. 605-27-005
Date of Basic Issue Feb 25/2013
Revision No. 01 Dated Apr 21/2017
This revision has no effect for aircraft on which the Basic Issue of this
Service Bulletin was done thus no other action is necessary.  Do not sign the
log book if you have not done this revision.  Keep the previous log book entry.
You may make an entry as “Not Applicable” for this revision.
This revision is issued to revise and update the Service Bulletin to incorporate the
changes applicable to the new Modification Summary 600-6596. The changes are as
follows:
1. Revise the Service Bulletin Summary Sheet to add the TLMC reference as per the
latest template.
2. Change Paragraph 1.G. to update the kit ordering details and add a new statement
for Price and Catalogue General Terms and Conditions.
3. Change, in Paragraph 1.K., the revision of Modification Summary 600-6320 to
Rev. D and the Kit Drawing K604-92310 to Rev B.
4. Change, Paragraph 1.K., to add the Modification Summary 600-6596 Rev. A, the
Kit Drawing K604-92311 Rev --, the GREO 604-27-42-011 Rev. – and the GREO
604-27-42-012 Rev. --.
5. Revise, in Paragraph 1.L., the TLMC references.
6. Revise Paragraphs 2.A. and Paragraph 2.D., to add NOTES for the Aircraft Set-Up
and Close-out.
7. Revise, throughout Paragraph 2, to rename the Aircraft Maintenance Manual (AMM)
references, from TASK to AMM.

### Page 2

MODEL CL-600-2B16
605-27-005
Page 2 of 2
8. Revise Paragraph 2.B, to add notes applicable to the allowable repair and oversize
hardware for the trunnion and pins.
9. Revise, Paragraph 3.D., to add a reference to the TLMC.
10. Revise Kit Drawing K604-92310 to Rev. B.
11. Add new Kit Drawing K604-92311 to Rev. --.
12. Make miscellaneous minor changes, as necessary, with no change of context.

### Page 3

Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 1 of 1
SERVICE BULLETIN SUMMARY
This Service Bulletin is available at:
www.cic.bombardier.com
MODEL CL-600-2B16
ATA 27-42
FLIGHT CONTROLS
MODIFICATION – HORIZONTAL STABILIZER TRIM-ACTUATING SYSTEM (HSTA) –
SERIALIZATION OF THE ACTUATOR PINS AND TRUNNIONS
The information below is provided for your reference.  For full details, please
see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 2500 flight hours or 48 months or
at the next HSTA scheduled maintenance
whichever comes first
EFFECTIVITY: A/C Serial No. 5701 to 5926
MANPOWER: 1 man-hour, If done in Conjunction with SB 605-27-002 or at the next
scheduled HSTA removal.
20 man-hours, If not done in Conjunction with SB 605-27-002 or the
next scheduled HSTA removal.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN
YES NO
TLMC, CH 5 AFFECTED YES NO
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION:  See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: For convenience and cost avoidance, it is recommended to do SB 605-27-002
at the same time as this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514-855-2999 or 1-866-538-1247

### Page 4

Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry
standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
© 2013 – 2017 Bombardier Inc.  All rights reserved
Challenger*, Global Express*, Global Express XRS*, Global 5000*, Learjet* are Trademarks of Bombardier Inc.
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 1 of 16
SERVICE BULLETIN
This Service Bulletin is available at:
www.cic.bombardier.com
MODEL CL-600-2B16
ATA 27-42
FLIGHT CONTROLS
MODIFICATION – HORIZONTAL STABILIZER TRIM-ACTUATING SYSTEM (HSTA) –
SERIALIZATION OF THE ACTUATOR PINS AND TRUNNIONS
1. PLANNING INFORMATION
NOTE: For convenience and cost avoidance, it is recommended to do SB 605-27-002
at the same time as this Service Bulletin.
A. Effectivity
CL-600-2B16 aircraft, Serial No. 5701 to 5926.
The intent of this Service Bulletin was met on the aircraft that follow with the
Service Non-Incorporated Engineering Orders (SNIEO) listed in the table that
follows:
SNIEO Number Aircraft Number
S03 5753
S04 5737
S09 5702, 5736, 5744, 5755, 5772, 5796, 5803,
5816, 5829, 5859, 5909 to 5926
All other subsequent CL-600-2B16 aircraft are scheduled for the modification
in production (Ref.:  Modification Summaries 600-11944).
NOTE: The instructions given in this Service Bulletin are only applicable to
the systems and parts installed at the time of delivery of the aircraft
or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent
action changes to make sure that this bulletin can be completed.

### Page 5

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 2 of 16
B. Reason
The Horizontal Stabilizer Trim Actuator (HSTA) structural interfaces (pins and
trunnions) of all Challenger models are now life limited.  Due to the
interchangeability between aircrafts of these components, they must be serialized
per FAR 45.15 in order to facilitate tracking when these components are removed
and their histories.
This Service Bulletin gives instructions to serialize the HSTA structural interfaces
to conform to the FAR 45.15 requirements.
C. Description
This Service Bulletin gives instructions to:
– Get access to the HSTA attachment parts,
– Perform the HSTA pin serialization procedure as per the kit drawing, and
– Do the necessary tests to make sure that the system operates correctly.
D. Compliance
Recommended within 2500 flight hours or 48 months or at the next HSTA
scheduled maintenance, whichever comes first from this Service Bulletin
release date (Basic Issue).
E. Approval
The technical content of this Service Bulletin has been approved under
the authority of Transport Canada Civil Aviation (TCCA) Design Approval
Organization (DAO) No. DAO #93-Q-02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the
FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by the
JAA and by EASA in accordance with established procedures.
F. Manpower
NOTES: 1. The man-hours given are estimates to help you schedule the tasks
given in this bulletin.  The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to
SB 605-00-002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3).  The accumulated curing
time is not included in the labor estimates and should be considered
for planning purposes before you schedule this Service Bulletin.
1 man-hour is necessary to do this modification, if the modification is done in
conjunction with Service Bulletin 605-27-002 or at the next scheduled HSTA
removal.

### Page 6

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 3 of 16
Bombardier Aerospace pay the 1 man hour required to do this Service Bulletin if:
(i) the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
(ii) this modification is done in conjunction with Service Bulletin 605-27-002.
Bombardier Aerospace does not pay the 20 man-hours necessary to do this
modification, when it is not done in conjunction with Service Bulletin 605-27-002.
G. Material - Cost and Availability
Kit 605K27-005 is necessary to do this modification.
KIT NO. PRICE
605K27-005 Please contact Bombardier
Aerospace Parts Services, in
Montreal, for delivery lead times and
confirmation of prices.
Sufficient kits will be kept for the estimated amount of orders.
This kit is available at no cost if a no-charge purchase order is sent to
Bombardier Aerospace within 2500 flight hours or 48 months, from this Service
Bulletin release date (Basic Issue).
For all parts transactions, Bombardier Aerospace’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply.  These
terms and conditions are found on the CIC website.
During or after the above free period, Smart Parts Plus does not pay for the kit.
H. Tooling
GSE REFERENCE NO. PART NO. DESCRIPTION
GSE 24−00−24 - Tag, Circuit Breaker
Commercially Available - Wrench, Torque
NOTES: 1. Refer to the Illustrated Tool and Equipment Manual to make sure
that you use the correct equipment configuration.
2. Refer to the Liability Statement for acceptable GSE equivalents.
I. Weight and Balance
No change.
J. Electrical Load Data
No change.

### Page 7

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 4 of 16
K. References
– Bombardier Aerospace, Modification Summary, 600-6320, Rev. D.
– Bombardier Aerospace, Modification Summary, 600-6596, Rev. A.
– Bombardier Aerospace, Restriction and/or Special Instruction (RSI),
C-4090, Rev. B.
– Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
– Bombardier Aerospace, Kit Drawing K604-92310, Rev. B.
– Bombardier Aerospace, Kit Drawing K604-92311, Rev. --.
– Bombardier Aerospace, General Repair Engineering Order (GREO)
604-27-42-011 Rev. --.
– Bombardier Aerospace, General Repair Engineering Order (GREO)
604-27-42-012 Rev. --.
– CL-605 Aircraft Maintenance Manual (AMM), Chapters 6, 12, 27 and 55.
L. Other Publications Affected
– CL-605 Aircraft Illustrated Parts Catalog (AIPC), Chapter 27.
– CL 605 Time Limits/Maintenance Checks (TLMC), Chapter 5-10-10:
1. HSTA Upper and Lower Pins Task 27-42-01-112* Rev 16, dated
Feb 23/2017.
2. HSTA Trunnion Support Task 27-42-01-108* Rev 16, dated Feb 23/2017.
M. Equivalent Service Bulletins
For the Challenger 600 aircraft, use SB 600-0760.
For the Challenger 601 aircraft, use SB 601-0626.
For the Challenger 604 aircraft, use SB 604-27-034.

### Page 8

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 5 of 16
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Aircraft
Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from
the CL-605 Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
NOTE: The Steps in the aircraft Set-up section of this service bulletin are
recommended steps.  The steps give a recommendation to get access to
the work area.  This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts.  Alternative steps
can be used at the operator discretion.
(1) Connect and energize the external ac power.  Refer to AMM 12-00-07-861-801.
(2) On the Cursor Control Panel (CCP) at the center pedestal, do the procedure
that follows:
NO. STEP EXPECTED RESULT
1 Push in F/CTL switch/light. FLIGHT CONTROL comes onEICAS display.
(3) On the pilot’s control wheel, do as follows:
NO. STEP EXPECTED RESULT
1 Set pilot’s pitch−trim switch to NOSEDN and hold it in this position. Horizontal stabilizer moves toits upper electrical stop.
2 Check horizontal stabilizer positionon EICAS display (ED−2). Horizontal−stabilizer verticalline shows value of 0.
NOTE:  The aural warning (clacker) will come on if the pilot’s pitch −trim
switch is held for more then 3 ±1 seconds. The aural warning
(clacker) will stop when the pilot’s pitch −trim switch is released.
(4) Remove external ac power.  Refer to AMM 12-00-07-861-802.

### Page 9

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 6 of 16
WARNING: PUT THE SAFETY DEVICES, WARNING SIGNS AND WARNING
PLACARDS IN POSITION BEFORE YOU START A PROCEDURE
ON OR NEAR:
-   FLIGHT CONTROLS
-   FLIGHT CONTROL SURFACES
-  COMPONENTS THAT MOVE.
MAKE SURE THAT PERSONS AND EQUIPMENT ARE NOT
NEAR THE FLIGHT CONTROL SURFACES. FLIGHT CONTROL
MOVEMENT CAN CAUSE INJURIES TO PERSONS AND DAMAGE
TO THE EQUIPMENT.
(5) Install the applicable warning placards on the pilot’s and copilot’s control
wheels.
(6) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
CBP−2 C5 STAB CH 1 HSTA 222
CBP−2 F8 STAB CH 1 HSTCU 222
CBP−3 A5 STAB CH 2 HSTA 221
CBP−4 B8 STAB CH 2 HSTCU 222
(7) Remove the middle upper fairing (326BT).  Refer to AMM 55-30-40-000-805.
(8) Remove the middle lower fairing (326CL/326CR).  Refer to
AMM 55-30-40-000-806.
B. Modification
(1) Do the serialization modification of the pin and trunnion” as per the attached
Kit Drawing, K604-92310.
NOTES: 1. Refer to the kit drawing for identification locations, Detail C, D
and E.
2. For allowable damage and repair on HSTA Trunnions, refer to
K604-92310, NOTE 3 and GREO 604-27-42-011.
3.  For allowable damage and repair on HSTA Pins, refer to
K604-92310, NOTE 3 and GREO 604-27-42-012.
4. In the manufacturing process, some trunnions and/or pins were
installed with oversize hardware.  For allowance criteria, refer to
K604-92310, NOTE 14 and to K604-92311.
(a) Serialize the lower pin, Part No. 601R92309-1 or 600-92383-5 or -7
(2 places).
(b) Serialize the upper pin, Part No. 601R92310-1 or 600-92384-5 or -7
(2 places).
(c) Serialize the trunnion, Part No. 601R92386-1 (4 places).

### Page 10

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 7 of 16
C. Testing
(1) Remove the tags and close the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE
CBP−2 C5 STAB CH 1 HSTA 222
CBP−2 F8 STAB CH 1 HSTCU 222
CBP−3 A5 STAB CH 2 HSTA 221
CBP−4 B8 STAB CH 2 HSTCU 222
(2) Do the operational test of the horizontal stabilizer trim system.  Refer to
AMM 27-40-00-710-801.
D. Close-out
NOTE: The Steps in the Close-out section of this service bulletin are
recommended steps.  The steps give a recommendation to install
components removed during the Aircraft Set-Up.  This recommendation is
to make sure that the aircraft is safe and ready to return to service.
Alternative steps can be used at the operator discretion.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Install the middle upper fairing (326BT).  Refer to AMM 55-30-40-400-805.
(3) Install the middle lower fairing (326CL/326CR).  Refer to
AMM 55-30-40-000-806.
(4) Remove the warning placards.
E. Stock Purge
NOTE: The instructions that follow are applicable to Bombardier Business
Aviation Services, Completion Centers, Authorized Service Facilities,
Service Parts Center, Montréal and operator’s stock rooms.
Verify if the lower pin, Part No. 601R92309-1 or 600-92383-5 or -7, the upper
pin, Part No. 601R92310-1 or 600-92384-5 or -7 and the trunnion, Part No.
601R92386-1, are serialized.  If the parts are not serialized, obtain disposition
with an SRPSA from:
Bombardier Aerospace
Customer Support Maintenance Engineering
Tel.: (514) 855-7464 – Monday to Friday – 8 a.m. to 5 p.m.
Fax.: (514) 855-8798

### Page 11

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 8 of 16
F. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and
send the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback.  Please take a moment to fill out our easy on-line
Service Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
Kit 605K27-005 is necessary to do this Service Bulletin and contains the parts
that follow:
NEW
PART NO.
QTY ITEM USED
PART NO.
INSTRUCTIONS -
DISPOSITION
601R92303-17 2 Laminated Shim - -
MS17826-6 8 Nut - -
MS24665-134 or
MS24665-153 8 Cotter Pin --
MS24665-238 or
MS24665-300 8 Cotter Pin --
NAS1149F0632P 8 Washer - -
S8225-06-14D 2 Bolt - -
S8225-06-20D 2 Bolt - -
S8225-06-8D 4 Bolt - -
NOTES: 1. In case of discrepancy between this list and the “Service Bulletin Kit
Parts List” contained in the respective kit, then the latter list prevails.
2. The actual quantity for some of the hardware contained in the kit
can be greater than the amount shown in the table as these items
are supplied in prepackaged quantities.
B. Parts
No parts required.

### Page 12

MODEL CL-600-2B16
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 9 of 16
C. Material
The material that follows, or equivalent, is necessary to do this Service Bulletin.
It can be purchased from a local supplier.  Bombardier Aerospace does not pay
for this consumable.
DESCRIPTION PART
No./NAME
SPECIFICATION QUANTITY SUPPLIER
(See Note)
Cloth Tape - - As
Necessary
Code: A
NOTES: 1. Refer to the table that follows for each supplier’s address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate.  In the event that this information
has changed, the operator is encouraged to use the World Wide
Web to find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Commercially Available
D. Publications
When this Service Bulletin is done, the manual issues that follow or later MUST be
used:
– CL 605 Time Limits/Maintenance Checks (TLMC), Chapter 5-10-10:
1. HSTA Upper and Lower Pins Task 27-42-01-112* Rev 16, dated Feb
23/2017.
2. HSTA Trunnion Support Task 27-42-01-108* Rev 16, dated Feb 23/2017.

### Page 13

MODEL CL-600-2B16
PL K604-92310 – Kit – HSTA Pin & Trunnion Serialization
(Sheet 1 of 3, Rev. B)
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 10 of 16
SB604-27-005-92310-B-S1-PL

### Page 14

MODEL CL-600-2B16
PL K604-92310 – Kit – HSTA Pin & Trunnion Serialization
(Sheet 2 of 3, Rev. B)
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 11 of 16
SB604-27-005-92310-B-S2-PL

### Page 15

MODEL CL-600-2B16
PL K604-92310 – Kit – HSTA Pin & Trunnion Serialization
(Sheet 3 of 3, Rev. B)
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 12 of 16
SB604-27-005-92310-B-S3-PL

### Page 16

K604-92310 – Kit – HSTA Pin & Trunnion Serialization
(Sheet 1 of 1, Rev. B)
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 13 of 16
SB604-27-005-92310-B-S1-1

### Page 17

K604-92310 – Kit – HSTA Pin & Trunnion Serialization
(Sheet 1 of 1, Rev. B - continued)
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 14 of 16
SB604-27-005-92310-B-S1-2

### Page 18

K604-92311 – Kit – HSTA Pin & Trunnion Replacement
(Sheet 1 of 1, Rev. --)
Basic Issue: Feb 25/2013 605-27-005
Revision 01: Apr 21/2017 Page 15 of 16
SB604-27-005-92311-NC-S1-1

### Page 19 (OCR)

B604-27-005-92311-NC-81-2
NOTE THAT BOLT LENGTH IS NOT PROVIDED. REFER 78 1ÁC 2, NETOY ATON FOR BOLT LENG  NAS 114858572F  18020201353520-15  B020201352620-12  NAS 11 48F8732P  18020201352924-15  18020281353824-15  MS17826-8 NAS1119F0818P  TABLE 2: UPPER PIN P/N 601R92310-17-3 / 600-92384-5/-7 INSTALLATICK  SPACER P/N SPACER ID NUT BON  |. 1885-. 1895] NAS1203-130 NAS42006-25N|. 190-. 196 MS17826-3|  . 205-. 210MS17826-3  . 2197-. 2207 NA51580A3R I 3DY NAS42006-25N. 221-. 226 M51 7826-3 1  NAS1204-13D NAS42008-25N. 256-. 263 M517826-4  1. 2641-, 2651 NA51580A41 3DX NA542008-25N. 265-, 270 MS|7826-4 1  |. 2797-. 2807 NAS1580A41 3DY NAS42008-25N. 281-. 286 MS| 7826-4 1  TABLE 3: LOWER PIN P/N 601R92309-1/-3 / 600-92383-5/-7 INSTALLATION  WAS SON  NAS1149F0332P  NAS1149F0432P  NAS1149F0432P  M517825-4 095014950169 N52  NAS1149F0432P  MS17826-4 B0202013S1816-32 MS2
MS17826-6  MS17826-6  MS17826-6  MS17826-7  MS17826-7  MS17826-7  2041-. 2051 NAS 1580A 3R | 3DX NAS42006-25N  * OPEN SPACER ID TO THIS DIMENSION. PROTECT REWORKED SURFACE FINISH CODE 045.  MS17826-3  . 2041-. 2051 NAS1580A3R8DX MS17826-3  .2197-.2207 NAS1580A3R8DY MS17826-3  MS17826-4
BOLT DIA  . 3735-. 3745  NAS6206- ( )DX  . 3891-. 3901  NAS6206-( )DY  . 4047-. 4057  NAS6207-( )D  . 4360-.4370  . 4516-.4526  NAS6207-( )DX  NAS6207-( )DY  . 4672-.4682  NAS6208-( )D  . 4985-.4995  BOLT PIA  1. 2485-. 2495|  BOLT PIA  NAS1203-8D  NAS8604D8  | .2485-. 2495|  1.2641-.2651 NAS9604D8X  .2797-.2807 NAS8604D8Y  PESTO)-:008 (**)  . 391  .406  . 453  . 234  0 OEEN ALTERNATIVE WASHER ID TO THIS DIMENSION AND PROTECT
HOLE CONDITION  . 375-. 380  NOMINAL  . 391-. 396  .406-.411  2 OVS  .438-.443  NEXT SIZE  ,453-. 458  NS 1 OVS  .469-.474  NS 2 OVS  500-. 505  2 NEXT SIZE  CONDI FION  189-. 195  . 218-.222  NOMINAL  . 205-.210  . 225-.235  1 OVS  . 239-. 249  . 221-.226  2 OVS  250-.255  NEXT SIZE  .265-.270  NE 1 OVC  NS 2 OVS  900. 200  CONST FION  . 202-. 206  . 193-. 197  NOMINAL  . 215-.225  1 OVS  . 231-.241  221-.231  2 OVS  . 250-.260  . 260-.270  NEXT SIZE  . 275-.285  . 265-.275  NS 1 OVS  . 291-.301  NS 2 OVS  ABLE 4: ALTERNATIVE WASHER  NAS 149506168  5020201353520-15  NAS 1 19F66328  0820281752620-15  NAST 14850715P  0828281333334-15  NAS 1149F8735P  5020201753024-15  NAS1149F0332P  3020201351516-32  NAS 1149F0432P  NAS1149F0432P  8020201351816-32  604-92311
500-23056 (REF)  0-8130 REF.  - 206 (2 PLCS)  - Ø: 813g PEF.  CLE 1: 8: 39g (2 PLCS)  600-21035 REF
34 (2 PLCS)  VIEN C (9B  VIEW D BE
A 75)  39 (2 PLCS) REF  600-21035 REF  89E23R2ALCS1  80389-93  (2 PLCS)  900 × 0.080 DEEP  34 (2 PLCS) REF  VIEW G  29 (2 PLCS) REF  VIEN F ep  K604-92311 - Kit - HSTA Pin & Trunnion Replacement  (Sheet 1 of 1, Rev. -- - continued)  605-27-005  Page 16 of 16
• 5p  70  DETAIL A T  390 12 PLCS  50 (2 PLCS) REF.
30 20  SA1R9732F17  VIEN E 8C  Basic Issue: Feb 25/2013  Revision 01: Apr 21/2017

### Page 20

SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: 605-27-005 ISSUE: Rev. 01 DATED: Apr 21/2017
TITLE: Modification – Horizontal Stabilizer Trim-Actuating System (HSTA) –Serialization of the
Actuator Pins and Trunnions
In an effort to improve the quality of our technical communications, we are replacing
the standard Service Bulletin Evaluation Form with an on-line Service Bulletin
Survey and we are requesting your feedback.  Please take a moment to fill out our
easy on-line Service Bulletin survey:
http://csefeedback.aero.bombardier.com

### Page 21

SERVICE BULLETIN INCORPORATION SHEET – “605-27-005”
BOMBARDIER
SUBMISSION
Upon completion of the Service Bulletin, please fill-in, fax to
(514) 855-8798 or e-mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier.  If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
     COMPLIED WITH
Service Bulletin
Number
Rev. * Parts
Completed
YES NO N/A Remarks/Reason
605-27-005 01 -
-- -
-- -
Actual hours to accomplish Service Bulletin:
* NOTES: 1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should be
reported.
Aircraft Serial No.  Aircraft Reg. No.
Airframe Hours:  Airframe Landings
S.B. Incorporation date  Service Order No.
(dd/mm/yy)
Facility Incorporating S.B.
Name Signature Date
                          (dd/mm/yy)Signature not required if sent by E-Mail

### Page 22

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Bombardier Business Aircraft Customer Services (BBACS)
P.O. Box 6087, Station Centre-ville
Montreal, Québec, Canada H3C 3G9
Attention: Customer Support Department, Maintenance Engineering
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
