# Bombardier Service Bulletin 605-32-008

Copy: Revision 01 ("Bombardier SB 605-32-008 Rev 1"), 13 pages: PDF https://openairdocs.org/files/sha256/f9/6d/f96d85531e704eb56dd1caf1647a334e7c991773057573456d70ca08773b7349; text https://openairdocs.org/service-documents/bombardier/sb-605-32-008/file/f96d85531e70.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-2001; AD 2024-03-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 605-32-008
- Latest revision known: 605-32-008, Revision 01, dated March 17, 2023 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-605-32-008

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-03-06](https://openairdocs.org/ad/2024-03-06.md), effective Apr 16, 2024: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-605-32-008/proposed.md).

## Text (13 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-2001; AD 2024-03-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Basic Issue of this Service Bulletin dated Dec 29/2022 and replace in its
entirety with this Revision 01.
Service Bulletin No. 605−32−008
Date of Basic Issue Dec 29/2022
Revision No. 01 Dated Mar 17/2023
This revision has no effect for aircraft on which the Basic Issue of this Service
Bulletin was done thus no other action is necessary. Do not sign the log book if you
have not done this revision. Keep the previous log book entry. You may make an
entry as "Not Applicable" for this revision.
This revision is issued to:
1. Change, in the Service Bulletin Summary Sheet, to update Planning Information and
Dedicated Schedule as “YES”.
2. Change, in Paragraph 1 and 1.G., to add dedicated schedule statements.
3. Change, in Paragraph 1.B., to add the FAA Airworthiness Directive number.
4. Change, in Paragraph 1.K., to revise the Modification Summaries, 600−6666 to Rev. C,
600−6667 to Rev. B−1 and Kit Drawing K604−85005 to Rev. A.
5. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL CL−600−2B16
605−32−008
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

MODIFICATION – MAIN LANDING GEAR (MLG) SYSTEM – INTRODUCTION OF
IMPROVED DYNAMIC JOINT AT LH/RH MAIN LANDING GEAR (MLG) SHOCK STRUT
TO TRAILING ARM
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 5 years from this Service Bulletin
release date (Basic Issue)
EFFECTIVITY: A/C Serial No. 5701 to 5988
MANPOWER: 9 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make
it necessary to implement this Service Bulletin.
To place an order for kit, please call Bombardier Aviation Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL CL−600−2B16
ATA 32−11
LANDING GEAR
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 1 of 1
This Service Bulletin is available at:

### Page 3

MODIFICATION – MAIN LANDING GEAR (MLG) SYSTEM – INTRODUCTION OF
IMPROVED DYNAMIC JOINT AT LH/RH MAIN LANDING GEAR (MLG) SHOCK STRUT
TO TRAILING ARM
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. They can be reached at
bacs_isit@aero.bombardier.com. The parts will be allocated on a first
come first serve basis.
Should you require additional information, please contact your Regional
Sales Manager (RM) or Field Service Representative (FSR).
For more information on dedicated schedules, refer to SB 605−00−002.
A. Effectivity
CL−600−2B16 aircraft, Serial No. 5701 to 5988.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aviation Service Bulletin(s).
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL CL−600−2B16
ATA 32−11
LANDING GEAR
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2022−2023 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 1 of 9
This Service Bulletin is available at:

### Page 4

B. Reason
1. Condition:
Repeated inspections are required for the MLG shock strut lower pin potential
cracks.
2. Evidence:
Repeat inspection reports found that the Main Landing Gear (MLG) trailing arm
to shock strut lower pin may crack at the anti−rotation tangs.
3. Objective/Benefit:
The Service Bulletin gives instructions to disassemble the LH/RH MLG shock
strut and trailing arm joint, and replace the trailing arm bushings with improved
design and re−assemble the joint with new dynamic joint components.
Implementation of this new design will eliminate the requirement of repeat
inspection of the shock strut to trailing arm pin, Part No. 19146−3 per Service
Bulletin 605−32−007, TCCA Airworthiness Directive CF−2020−54R1 and
FAA Airworthiness Directive 2021−20−13.
C. Description
This Service Bulletin gives instructions to:
− Get access to LH/RH Main Landing Gear (MLG) shock strut assembly.
− Do the modification of shock strut to trailing arm with improved dynamic joint per
Safran Landing Systems, Service Bulletin SB19090−32−11.
− Do the required identification inscriptions per Safran Landing Systems, Service
Bulletin SB19090−32−11, Section 3.B.
− Do the necessary tests to make sure that the system operates correctly.
D. Compliance
Recommended within 5 years from this Service Bulletin release date (Basic Issue).
NOTES: 1. If it is not possible to complete all the instructions in this Service
Bulletin because of the aircraft configuration, submit an SRPSA for
analysis and to get an approved disposition to complete this Service
Bulletin. Standard SRPSA fees may apply. Refer to the Services
section of the Bombardier customer portal for the latest prices, rates
and fees.
2. It is suggested to align the accomplishment of this Service Bulletin
with one of the following TLMC inspections; 48 month, 96 month or
192 month.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 2 of 9

### Page 5

E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by the EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTES: 1. The man−hours given are to help you schedule the tasks given in this
Service Bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to
SB 605−00−002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3.C). The accumulated
curing time is not included in the man−hours and should be
considered for planning purposes before you schedule this Service
Bulletin.
3. Labor hours are based on the fact that the modification will be done at
the next scheduled maintenance task or inspection. Therefore no
man−hours are allotted to prepare the aircraft for maintenance or to
prepare for this Service Bulletin.
9 man−hours are necessary to do of this modification.
Bombardier Aviation does not pay for the labor to do this modification.
G. Material − Cost and Availability
Kit 650K32−005 is necessary to do this modification. For material data, refer to
Paragraph 3.C.
KIT NO. PRICE
650K32−005
Please contact Bombardier Aviation
Parts Services, in Montreal, for delivery
lead times and confirmation of prices.
Bombardier Aviation does not pay for the kit to do this modification.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 3 of 9

### Page 6

This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are
used to reserve and manage inventory due to limited availability of rotable stock,
parts and/or kits. Parts are limited, therefore, advance part scheduling with our
In−Service Implementation Team (ISIT) is recommended prior to a maintenance
visit. They can be reached at bacs_isit@aero.bombardier.com. The parts will be
allocated on a first come first serve basis.
Should you require additional information, please contact your Regional Sales
Manager (RM) or Field Service Representative (FSR).
For more information on dedicated schedules, refer to SB 605−00−002.
For those aircraft in new aircraft warranty at the time of Service Bulletin distribution,
Smart Parts does not pay for the kit at any time.
For those aircraft out of new aircraft warranty at the time of Service Bulletin
distribution, Smart Parts pays for the kit for up to 60 months from the Service
Bulletin distribution date (Basic Issue).
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
24−00−24 S4933959−501 Tag, Circuit Breaker − Red
Commercially Available CAT6037−1−01 Removal Support Outer
Commercially Available CAT6037−1−02 Bung Inner
Commercially Available CAT6037−1−03 Support Washer Install
Commercially Available − Fluid Container
Commercially Available − Grease Gun (Non−pneumatic)
Commercially Available − Hose, Transparent Plastic(Flexible)
Commercially Available − Reaming Mandrel 1.375 to1.376 in (34.93 to 34.95 mm)
Commercially Available − Torque Wrench 50 to 60 lbf in(5.56 to 6.77 Nm)
NOTES: 1. Refer to the CL−605 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for the CL−605, for
acceptable GSE equivalents.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 4 of 9

### Page 7

3. This list is provided for quick reference. In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM−WM prevail. Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
WEIGHT MOMENT
−0.16 pounds (−0.07 kg) −86.064 pound−inches (−0.99 kgm)
J. Electrical Load Data
No change.
K. References
− TCCA Airworthiness Directive, (pending).
− Advisory Wire, AW600−32−2612.
− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−4293,
Rev. −−1.
− Bombardier Aviation, Modification Summary, 600−6666, Rev. C.
− Bombardier Aviation, Modification Summary, 600−6667, Rev. B−1.
− Bombardier Aviation, Kit Drawing K604−85005, Rev. A.
− Bombardier Aviation, Service Bulletin 605−32−007 “Special Check − Main
Landing Gear − Lubrication and Inspection of LH/RH Main Landing Gear (MLG)
Shock Strut Lower Pin 19146−3”.
− Safran Landing Systems, Service Bulletin SB19090−32−11, Rev. 01,
dated 23 November 2022 (attached).
− CL−605 Aircraft Maintenance Manual (AMM), Chapters 6, 7, 12, 24, 29 and 32.
− CL−605 Aircraft Illustrated Parts Catalog (AIPC), Chapter 32.
− CL−605 Standard Practice Manual (SPM), Chapters 20 and 51.
L. Other Publications Affected
None.
M. Equivalent Service Bulletins
− For the Challenger 604 aircraft, use the Service Bulletin 604−32−031.
− For the Challenger 650 aircraft, use the Service Bulletin 650−32−005.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 5 of 9

### Page 8

2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the CL−605 Aircraft
Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
CL−605 Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
(1) Obey all the electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all the hydraulic safety precautions. Refer to AMM 29−00−00−910−801.
(3) Obey all the hydraulic technical precautions. Refer to
AMM 29−00−00−910−802.
(4) Release the hydraulic pressure from the No. 2 system. Refer to
AMM 12−00−04−862−802.
(5) Release the hydraulic pressure from the No. 3 system. Refer to
AMM 12−00−04−862−804.
(6) Remove the electrical power from the aircraft. Refer to
AMM 24−00−00−861−802.
(7) Install a DO NOT OPERATE THE HYDRAULIC SYSTEM warning tag on the
No. 2 and No. 3 hydraulic systems, on the HYDRAULIC control panel in the
flight compartment.
(8) Lift the aircraft on jacks. Refer to AMM 07−10−01−581−801.
(9) Remove the MLG wheel(s) as necessary. Refer to AMM 32−41−01−000−801.
(10) Remove the brake unit(s) as necessary. Refer to AMM 32−43−19−000−801.
B. Modification
NOTES: 1. If it is not possible to complete all the instructions in this Service
Bulletin because of the configuration of the aircraft, submit an SRPSA
for analysis and get an approved disposition to complete this Service
Bulletin.
2. Bushing material is copper beryllium. The use of appropriate tooling,
protective measures and applicable safety precautions need apply.
3. If bushing rework cannot be accomplished on wing in accordance with
Safran Landing Systems, Service Bulletin SB19090−32−11, do the
trailing arm removal. Refer to AMM 32−11−10−000−801.
CAUTION: HOLD THE WEIGHT OF THE MAIN LANDING GEAR
(MLG) TRAILING ARM WITH AN AXLE JACK WHEN
YOU REMOVE THE SHOCK STRUT LOWER PIN.
(1) Do the modification on LH and RH MLG assembly for shock strut to trailing arm
with improved dynamic joint per Safran Landing Systems, Service
Bulletin SB19090−32−11.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 6 of 9

### Page 9

(2) Do the required identification inscriptions per Safran Landing Systems, Service
Bulletin SB19090−32−11, Section 3.B.
(3) If trailing arm was removed before to incorporate Safran Landing Systems,
Service Bulletin SB19090−32−11, reinstall the trailing arm. Refer to
AMM 32−11−10−400−801.
(4) Install the brake unit(s). Refer to AMM 32−43−19−400−801.
(5) Install the MLG wheel(s). Refer to AMM 32−41−01−400−801.
(6) Do the functional test of MLG shock strut assembly. Refer to
AMM 32−11−07−720−801.
C. Testing
(1) Remove the DO NOT OPERATE THE HYDRAULIC SYSTEM warning tag
from the No. 2 and No. 3 hydraulic systems, on the HYDRAULIC control panel
in the flight compartment.
(2) Connect and energize the electrical power to the aircraft. Refer to
AMM 24−00−00−861−801.
(3) Do the landing gear extension and retraction. Refer to
AMM 32−30−00−910−801.
(4) Lower the aircraft to the ground and remove the jacks. Refer to
AMM 07−10−01−586−801.
(5) Bleed the MLG brakes. Refer to AMM 32−43−00−870−801.
(6) Do the operational test of the MLG brake system. Refer to
AMM 32−43−00−710−801.
(7) Do the operational test of the antiskid system. Refer to
AMM 32−44−00−710−801.
D. Close−out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
E. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
For information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin
Group at the following email address:
bbad_SBgroup@aero.bombardier.com
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 7 of 9

### Page 10

3. MATERIAL INFORMATION
A. Kit
Kit 650K32−005 is necessary to do this Service Bulletin and contains the parts that
follow:
NEW PART
NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION
81−19090−00 1 SLS Modification Kit − −
NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit
Parts List contained in the respective kit, then the later list prevails.
2. The actual quantity for some of the hardware contained in the kit can
be greater than the amount shown in the table as these items are
supplied in prepackaged quantities.
3. Bushing material is copper beryllium. The use of appropriate tooling,
protective measures and applicable safety precautions need apply.
B. Part
No parts required.
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aviation does not pay
for these consumables.
DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY SUPPLIER(SEENOTE)
Corrosion
Preventive
Compound
− MIL−PRF−16173 AsNecessary Code: A
Grease
Aircraft
and
Instrument
Aeroshell
Grease 7
MIL−PRF−23827
(Type II)
As
Necessary Code: B
Coating,
Polyurethane,
Fluid
Resistant
− − AsNecessary Code: B
NOTES: 1. Refer to the table that follows for each suppliers address listed by
codes.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 8 of 9

### Page 11

2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Chemsol, Inc.
8423 Boettner Road,
Bridgewater, MI 48115
U.S.A.
Tel.: 1−800−663−4057
Fax: 1−734−944−3781
www.chemsol.com
Code: B
Commercially Available
D. Publications
No publications required.
MODEL CL−600−2B16
Basic Issue: Dec 29/2022
Revision 01: Mar 17/2023
605−32−008
Page 9 of 9

### Page 12

605−32−008 Rev. 01 Mar 17/2023
MODIFICATION – MAIN LANDING GEAR (MLG) SYSTEM –
INTRODUCTION OF IMPROVED DYNAMIC JOINT AT LH/RH MAIN
LANDING GEAR (MLG) SHOCK STRUT TO TRAILING ARM
bbad_SBgroup@aero.bombardier.com
NOTE: Please use Salesforce only for troubleshooting issues or when Engineering
deviation is necessary to accomplish the Service Bulletin modification.
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:
For any information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin Group
at the following email address:

### Page 13

SERVICE BULLETIN INCORPORATION SHEET − "605−32−008"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
605−32−008 01
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
