# Bombardier Service Bulletin 605-35-006

Copy: Revision 01 ("605-35-006 Revision 1"), 19 pages: PDF https://openairdocs.org/files/sha256/66/c2/66c28dece8103c0f7b8d7205ac072ee55354eecef0d03049fbe0667af25bf41d; text https://openairdocs.org/service-documents/bombardier/sb-605-35-006/file/66c28dece810.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-0025; AD 2023-12-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 605-35-006
- Latest revision known: 605-35-006, Revision 01, dated January 28, 2022 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-605-35-006

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-16-01](https://openairdocs.org/ad/2023-16-01.md), effective Aug 23, 2023: Revision 01
- [AD 2023-12-20](https://openairdocs.org/ad/2023-12-20.md), effective Aug 23, 2023: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-605-35-006/proposed.md).

## Text (19 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-0025; AD 2023-12-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Basic Issue of this Service Bulletin dated Aug 23/2021, and the Information
Sheet dated Sep 21/2021 and replace in its entirety with this Revision 01.
Service Bulletin No. 605−35−006
Date of Basic Issue Aug 23/2021
Revision No. 01 Dated Jan 28/2022
This revision has no effect for aircraft on which the Basic Issue of this Service
Bulletin was done thus no other action is necessary. Do not sign the log book if you
have not done this revision. Keep the previous log book entry. You may make an
entry as "Not Applicable" for this revision.
This revision is issued to:
1. Change, in the Service Bulletin Summary Sheet, to revise planning Information as YES.
2. Incorporated Info Sheet dated Sep 21/2021, in Paragraph 1, to add Note 2.
3. Change, in Paragraph 1.C., to delete an instruction statement.
4. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL CL−600−2B16
605−35−006
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

MODIFICATION – OXYGEN SUPPLY SYSTEM –
FLEXIBLE OXYGEN HOSE REPLACEMENT
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Refer to Paragraph 1.D. for details.
EFFECTIVITY: Refer to Paragraph 1.A.
MANPOWER: Refer to Paragraph 1.F.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN YES NO
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE NOYES
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make
it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aviation Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL CL−600−2B16
ATA 35−11
OXYGEN
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 1 of 1
This Service Bulletin is available at:

### Page 3

MODIFICATION – OXYGEN SUPPLY SYSTEM –
FLEXIBLE OXYGEN HOSE REPLACEMENT
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. The quantity of oxygen hose assemblies required to do this Service
Bulletin depends on the aircraft specific floor plan configurations that
follow:
FLOOR PLAN
CONFIG
O2 CORP PART
NO.
HYDRAFLOW
PART NO.
QTY
PER A/C
1 O2C20T1−5−0700 38911−05−0070 8
2 O2C20T1−5−0700 38911−05−0070 9
3
O2C20T1−5−0700 38911−05−0070 8
O2C20T14−5−8900 38913−05−0890 1
4
O2C20T1−5−0700 38911−05−0070 9
O2C20T14−5−8900 38913−05−0890 1
SPECIAL 1
(For A/C Serial
No. 5896 and
5898)
O2C20T1−5−0700 38911−05−0070 9
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL CL−600−2B16
ATA 35−11
OXYGEN
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2021−2022 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 1 of 15
This Service Bulletin is available at:

### Page 4

FLOOR PLAN
CONFIG
O2 CORP PART
NO.
HYDRAFLOW
PART NO.
QTY
PER A/C
SPECIAL 2
(For A/C Serial
No. 5909, 5911
and 5913)
O2C20T1−5−0700 38911−05−0070 10
A. Effectivity
CL−600−2B16 aircraft Serial No. 5702 to 5705, 5707, 5709, 5710, 5712, 5714,
5715, 5718, 5719, 5722, 5723, 5725, 5727, 5728, 5731 to 5733, 5735, 5736, 5740,
5742, 5743, 5745, 5746, 5748 to 5750, 5752 to 5754, 5756 to 5758, 5760 to 5762,
5764 to 5766, 5768 to 5770, 5772 to 5774, 5776 to 5780, 5782 to 5787, 5790,
5791, 5793, 5794, 5796, 5797, 5799, 5800, 5802, 5803, 5805 to 5814, 5816, 5818
to 5820, 5823 to 5829, 5831 to 5853, 5856, 5857, 5859 to 5863, 5865 to 5874,
5876 to 5881, 5883 to 5888, 5890 to 5894, 5896 to 5898, 5900 to 5906, 5908 to
5911, 5913 to 5938, 5940 to 5947, 5949 to 5980, 5982 to 5985, 5987 and 5988.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aviation Service Bulletin(s).
B. Reason
1. Condition:
There have been reports that oxygen masks failed to deploy during a scheduled
maintenance due to oxygen leakage from the flexible hoses.
2. Evidence:
After investigation, it was found that over time, the O2C20T1 series hoses may
have leak points in them through structural cracks or breaks, and may become
rigid or brittle at some areas.
3. Objective/Benefit:
This Service Bulletin instructs to remove and replace all installed O2C20T1
series flexible hoses with equivalent 3891X series hoses. Engineering
evaluation has concluded that 3891X series flexible oxygen hoses, which are
manufactured from different materials, have shown no sign of deterioration due
to age or other environmental factors.
C. Description
This Service Bulletin gives instructions to:
− Examine the part numbers of lavatory oxygen hose assembly,
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 2 of 15

### Page 5

− Replace all the O2C20T1 series hoses with the equivalent 3891X series hoses,
if leaks are found or prior to particular time intervals based on age of aircraft,
and
− Do the ground test procedure for the oxygen system flex line replacement.
D. Compliance
For aircraft with six years or more from Aircraft Completion STC issuance (Specific
aircraft MDS release date), this modification is recommended within 12 months of
Service Bulletin release date (Basic Issue).
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) STC SA06–90, FAA STC
number ST02355NY, EASA STC number 10016019.
F. Manpower
NOTES: 1. The man−hours given are to help you schedule the tasks given in this
Service Bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to
SB 650−00−002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the man−hours and should be considered for
planning purposes before you schedule this Service Bulletin.
3. Labor hours are based on the fact that the modification will be done at
the next scheduled maintenance task or inspection. Therefore no
man−hours are allotted to prepare the aircraft for maintenance or to
prepare for this Service Bulletin.
3 man−hours are necessary per oxygen hose to do this modification.
The labor required to do this Service Bulletin is at no cost if:
− The work is done during new aircraft warranty period,
− The work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− This Service Bulletin is scheduled in less than 24 months from its release date
(Basic Issue).
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 3 of 15

### Page 6

G. Material − Cost and Availability
No kit is necessary to do this modification.
The parts listed in Paragraph 3.B. may be necessary to do this modification. For
material data, refer to Paragraph 3.C.
The parts are available at no cost if:
− Ordered during new aircraft warranty period, and
− A no−charge purchase order is sent to Bombardier Aviation in less than
48 months, from this Service Bulletin release date (Basic Issue).
The parts can be purchased by sending a purchase order to Bombardier Aviation
Parts Services, Montreal.
For all parts transactions, Bombardier Aviation’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply. These
terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com
Smart Parts does not pay for this recommended Service Bulletin at any time.
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
24−00−24 S4933959−501 Tag, Circuit Breaker
Commercially Available −
Oxygen Pressure Test Gauge
0 to 100 psi (0 to 689.48 kPa)
with 1/2−20 UNF
end fittings/adapters (per GTP)
Commercially Available − Torque, Wrench 100 to 125 lbf in(11.3 to 14.12 Nm)
NOTES: 1. Refer to the CL−605 Illustrated Tool and Equipment Manual (ITEM) to
make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for the, CL−605 for
acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail. Other approved
alternative tools are acceptable and can also be used.
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 4 of 15

### Page 7

I. Weight and Balance
No change.
J. Electrical Load Data
No change.
K. References
− TCCA Airworthiness Directive, (pending).
− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−4272,
Rev. A.
− Bombardier Aviation, Kit Drawing BAS63038524, Rev. NC.
− Bombardier Aviation Ground Test Procedure, BAS63128044, Rev. NC.
− CL−605 Aircraft Maintenance Manual (AMM), Chapters 6, 24 and 35.
− CL−605 Supplemental Maintenance Manual (SMM), Chapters 25 and 35.
− CL−605 Standard Practices Manual (SPM), Chapters 20 and 51.
L. Other Publications Affected
− Bombardier Aviation, Supplemental Illustrated Parts Catalog
Addendum (SIPCA), A04−2003−SIPCA.
− Bombardier Aviation, Supplemental Maintenance Manual Addendum (SMMA),
A04−2002−SMMA.
M. Equivalent Service Bulletin
− For the Challenger 650 aircraft, use SB 650−35−002.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the CL−605 Aircraft
Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
CL−605 Aircraft Maintenance Manual (AMM), Chapter 6.
A. Aircraft Setup
WARNING: OBEY ALL THE OXYGEN SAFETY PRECAUTIONS WHEN YOU DO
MAINTENANCE ON THE OXYGEN SYSTEM AND OXYGEN
SYSTEM COMPONENTS. IF YOU DO NOT OBEY THE SAFETY
PRECAUTIONS, YOU CAN CAUSE A FIRE OR AN EXPLOSION.
THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO
EQUIPMENT.
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 5 of 15

### Page 8

WARNING: DO NOT LET OIL, GREASE OR SOLVENTS GET ON YOUR
HANDS, CLOTHING OR THE EQUIPMENT USED TO DO WORK
ON THE OXYGEN SYSTEM. IF OXYGEN TOUCHES GREASE, OIL
OR SOLVENTS, THEY CAN START TO BURN.
(1) Obey all the electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all the oxygen system safety precautions. Refer to
AMM 35−00−00−910−801.
(3) In the flight compartment, on the PASSENGER OXYGEN control panel, set the
CLOSED/NORMAL/OVERRIDE switch to CLOSED.
(4) Attach a DO NOT ACTIVATE sign to the PASSENGER OXYGEN control
panel.
(5) Open the Passenger Service Unit (PSU). Refer to SMM 25−26−53−010−801.
(6) Remove the lavatory headliner. Refer to SMM 25−40−55−000−801.
B. Modification — Replacement of Defective Flexible Oxygen Hose
NOTE: If it is not possible to complete all the instructions of this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
(1) Examine the part numbers of existing oxygen hose assembly in the lavatory
oxygen system.
(a) If the oxygen hose assembly, Part No. O2C20T14−5−8900, is installed,
replace all the O2C20T1 series hoses in the lavatory as per step (3) and
go to step (2).
(b) If the oxygen hose assembly, Part No. 38302F0650C, is installed, no
further action is necessary. Go to step (2).
(2) For all cabin locations other than lavatory, replace all the O2C20T1 series
hoses as per step (3).
(3) Remove and replace the O2C20T1 series oxygen hoses as follows. Refer to
Kit Drawing BAS63038524.
CAUTION: USE TWO WRENCHES WHEN YOU REMOVE THE FITTING.
USE ONE WRENCH TO HOLD THE FITTING, AND THE
OTHER WRENCH TO LOOSEN THE COUPLING NUT. YOU
CAN CAUSE DAMAGE TO THE COMPONENTS.
CAUTION: USE TWO WRENCHES WHEN YOU TORQUE THE FITTING.
USE ONE WRENCH TO HOLD THE FITTING, AND THE
OTHER WRENCH TO TORQUE THE NUT. YOU CAN CAUSE
DAMAGE TO THE COMPONENTS.
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 6 of 15

### Page 9

CAUTION: MAKE SURE THAT YOU PUT A PROTECTIVE COVER OR
CAP IN ALL THE OPEN OXYGEN LINES AND COMPONENT
FITTINGS. IF YOU DO NOT DO THIS IMMEDIATELY AFTER
THEY ARE DISCONNECTED, UNWANTED MATERIALS CAN
GO INTO THE OXYGEN SYSTEM. THIS CAN CAUSE
CONTAMINATION OF THE OXYGEN SYSTEM.
(a) Disconnect and discard the O2C20T1 series hoses from the oxygen
deployment box fitting and the oxygen rigid line.
(b) Replace all the O2C20T1 series hoses with equivalent 3891X series
hoses as given in the table below:
NOTES: 1. Reuse the 4−way tie mount. If it is damaged during removal,
it is permissible to use mounting base, Part No. ABMM−D.
Bond the mounting base with Araldite 2011 adhesive as per
manufacturer specifications. It is permissible to use alternate
adhesive and process as per SPM 51−21−67.
2. Make sure that there is a clearance of 0.25 in (6.35 mm)
between the hose assembly and the surrounding structure or
components that can cause damages. Securely install the
hoses with the tie down strap, Part No. B0816019−002 or
equivalent, to prevent fouling with other existing parts.
3. Make sure that a minimum bend radius of
0.75 in (19.05 mm) is maintained in the hose assembly, Part
No. 38911−05−0070.
4. Do not crush oxygen hoses during installation.
5. If the existing line tap elbow assembly is damaged during
hose replacement, replace it with a new elbow assembly,
Part No. O2C10T05−5−5.
6. Do not use teflon tape on any flared male or female tube
fittings and coupling sleeve threads.
7. For the connection of oxygen lines on male pipe threads,
apply anti−seize tape conforming to MIL−T−27730, Type I.
On male flared threads, apply only anti−seize compound that
conforms to MIL−G−27617, which is suitable for gaseous
oxygen.
O2C20T1 SERIES HOSE
PART NO.
EQUIVALENT 3891X SERIES HOSE
PART NO.
O2C20T1−5−0700 38911−05−0070
O2C20T14−5−8900 38913−05−0890
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 7 of 15

### Page 10

(c) Install convolex tube, Part No. HCTE−0500−0 over the new oxygen hose
assembly with two turns of fiberglass tape, Part No. MIL−1−19166.
(d) Torque the oxygen hose fitting to the deployment box and the oxygen rigid
line to 100 to 125 lbf in (11.3 to 14.12 Nm). Refer to
SPM−MM 20−22−00−910−802.
(e) Secure the oxygen hose fitting with a lockwire. Refer to
SPM−MM 20−50−00−400−801.
C. Testing
(1) In the flight compartment, on the PASSENGER OXYGEN control panel, set the
CLOSED/NORMAL/OVERRIDE switch to OPEN.
(2) Do the ground test procedure for the oxygen system flex line replacement.
Refer to Bombardier Document Number BAS63128044.
D. Close−out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Install the lavatory headliner. Refer to SMM 25−40−55−400−801.
(3) Close the PSU. Refer to SMM 25−26−53−410−801.
(4) Remove the DO NOT ACTIVATE sign from the PASSENGER OXYGEN
control panel.
E. Recording
You can do each PART of this Service Bulletin independently. When any PART of
this Service Bulletin is completed, make an entry in the aircraft log and send the
attached Incorporation Notice to Bombardier Business Aircraft Customer Services
(BBACS).
For information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin
Group at the following email address:
bbad_SBgroup@aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
No kits required.
B. Parts
The parts that follow may be necessary to do this Service Bulletin and are available
from Bombardier Aviation Parts Services, Montreal:
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 8 of 15

### Page 11

NEW PART NO. QTY ITEM USED PART NO. INSTRUCTIONS- DISPOSITION
38911−05−0070 AR
Hose
Assembly −
Oxygen
O2C20T1−5−0700 Discard
38913−05−0890 AR
Hose
Assembly −
Oxygen
O2C20T14−5−8900 Discard
ABMM−D AR 4−way TieMount − −
B0816019−002 AR Strap, TieDown − −
HCTE−0500−0 AR ConvolexTube − −
O2C10T05−5−5 AR
Elbow Line
Type
Assembly
− −
NOTE: The part numbers for the items listed above are subject to change without
revision to this Service Bulletin. In case of discrepancy between this list
and any other list, the Illustrated Parts Catalog prevails and shall be used
to determine the latest part number.
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aviation does not pay
for these consumables.
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 9 of 15

### Page 12

DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY
SUPPLIER
(SEE
NOTE)
Araldite 2011 − − AsNecessary
Code: A
Cloth, No−Lint − − AsNecessary
Compound,
Anti−Seize − MIL−G−27617 AsNecessary
Compound,
Leak
Detection
− MIL−L−25567 AsNecessary
Fiberglass
Tape − MIL−I−19166 AsNecessary
Lockwire NASM20996NC32 − AsNecessary
Tape,
Anti−Seize − MIL−T−27730,Type I AsNecessary
NOTES: 1. Refer to the table that follows for each supplier’s address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Commercially Available
D. Publications
The publications that follow are required after this Service Bulletin has been
incorporated.
− Bombardier Aviation, Supplemental Illustrated Parts Catalog
Addendum (SIPCA), A04−2003−SIPCA.
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 10 of 15

### Page 13

− Bombardier Aviation, Supplemental Maintenance Manual Addendum (SMMA),
A04−2002−SMMA.
MODEL CL−600−2B16
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 11 of 15

### Page 14

SB650−35−002−38524−NC−S1 
BAS63038524 − Flexible Oxygen Line Replacement
(Sheet 1 of 4, Rev. NC)
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 12 of 15

### Page 15

SB650−35−002−38524−NC−S2 
BAS63038524 − Flexible Oxygen Line Replacement
(Sheet 2 of 4, Rev. NC)
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 13 of 15

### Page 16

SB650−35−002−38524−NC−S3 
BAS63038524 − Flexible Oxygen LIne Replacement
(Sheet 3 of 4, Rev. NC)
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 14 of 15

### Page 17

SB650−35−002−38524−NC−S4 
BAS63038524 − Flexible Oxygen Line Replacement
(Sheet 4 of 4, Rev. NC)
Basic Issue: Aug 23/2021
Revision 01: Jan 28/2022
605−35−006
Page 15 of 15

### Page 18

605−35−006 Rev. 01 Jan 28/2022
MODIFICATION – OXYGEN SUPPLY SYSTEM –
FLEXIBLE OXYGEN HOSE REPLACEMENT
bbad_SBgroup@aero.bombardier.com
NOTE: Please use Salesforce only for troubleshooting issues or when Engineering
deviation is necessary to accomplish the Service Bulletin modification.
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:
For any information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin Group
at the following email address:

### Page 19

SERVICE BULLETIN INCORPORATION SHEET − "605−35−006"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
605−35−006 01
COMPLIED WITH
YES    NO    N/A
PART A
PART B
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
