# Bombardier Service Bulletin 700-24-090

Copy: No revision named ("700-24-090 Basic"), 14 pages: PDF https://openairdocs.org/files/sha256/9d/c6/9dc613ad71bb7a6afc14f6af28c9ad0c8c48a022eae9080fc13d27870d590bdb; text https://openairdocs.org/service-documents/bombardier/sb-700-24-090/file/9dc613ad71bb.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0104; AD 2020-12-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-24-090
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-24-090

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2020-12-14](https://openairdocs.org/ad/2020-12-14.md), effective Sep 8, 2020: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-700-24-090/proposed.md).

## Text (14 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0104; AD 2020-12-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SPECIAL CHECK/MODIFICATION - EMERGENCY AC-POWER SUPPLY -
REPLACEMENT OF THE RAM AIR TURBINE (RAT) DEPLOYMENT ACTUATOR PART
NO. BZ02001-01 (GL456-1301-1)
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Refer to Paragraph 1.D.
EFFECTIVITY: See Paragraph 1.A
MANPOWER: Refer to Paragraph 1.F.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin will be subject to an Airworthiness Directive, which will make
it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 24−23
ELECTRICAL POWER
Basic Issue: Feb 22/2019 700−24−090
Page 1 of 1
This Service Bulletin is available at:

### Page 2

SPECIAL CHECK/MODIFICATION - EMERGENCY AC-POWER SUPPLY -
REPLACEMENT OF THE RAM AIR TURBINE (RAT) DEPLOYMENT ACTUATOR PART
NO. BZ02001-01 (GL456-1301-1)
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. This Service Bulletin is also applicable for RAT Deployment Actuator, Part
No. BZ02001−01 (GL456−1301−1) in the operator’s stock room.
3. Do Part A within 36 months from Service Bulletin Release Date (Basic
Issue). If necessary, do Part B within 36 months from Service Bulletin
Release Date (Basic Issue).
4. Part B (Modification) of this Service Bulletin is covered by a dedicated
schedule. Dedicated schedules are used to reserve and manage inventory
due to limited availability of rotable stock, parts and/or kits. Parts are
limited, therefore, advance part scheduling with our In−Service
Implementation Team (ISIT) is recommended prior to a maintenance visit.
Please contact your Regional Manager (RM), Field Service
Representative (FSR) or Customer Service Representative (CSR) to
schedule your aircraft as there is a limited availability. The parts will be
allocated on a first come first serve basis.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 24−23
ELECTRICAL POWER
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2019 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Feb 22/2019 700−24−090
Page 1 of 11
This Service Bulletin is available at:

### Page 3

A. Effectivity
BD−700−1A10 aircraft, Serial No.9002 to 9312, 9314 to 9380 and 9384 to 9429
with RAT Deployment Actuator, Part No. BZ02001−01 (GL456−1301−1) with the
serial numbers listed in Table 1 of Paragraph 1.A. (b) of the attached VSB No.
24−03.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
B. Reason
1. Condition:
During an in−flight deployment test, the RAT did not fully extend. After it was
stowed successfully, a second deployment was attempted but it still did not fully
extend. Apart from this single occurrence, there have been no other in−service
events reported to date to Bombardier.
2. Evidence:
After investigation by the supplier it was discovered that galling of the piston rod
created mechanical interference that caused the piston rod to not move freely
within the bore of the gland housing. This is what prevented the RAT to fully
extend.
3. Objective/Benefit:
This Service Bulletin gives instructions to install an upgraded RAT Deployment
Actuator that will prevent galling between the piston rod and the gland housing
since it now contains a non−metallic sleeve assembled into the bore of the
gland housing. This improves the reliability of the component.
C. Description
This Service Bulletin gives instructions in PART A to:
− Inspect the RAT Deployment Actuator to get the serial number.
This Service Bulletin gives instructions in PART B to:
− Remove the RAT Deployment Actuator,
− Return the removed RAT Deployment Actuator for an upgraded unit,
− Install the upgraded RAT Deployment Actuator, and
− Do the necessary tests as required to make sure that the system operate(s)
correctly.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 2 of 11

### Page 4

D. Compliance
Part A and Part B (if required) recommended within 36 months from Service
Bulletin release date (Basic Issue).
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTES: 1. The man−hours given are to help you schedule the tasks given in this
Service Bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to SB
700−00−002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the man−hours and should be considered for
planning purposes before you schedule this Service Bulletin.
3. Labor hours are based on the fact that the modification will be done at
the next scheduled maintenance task or inspection. Therefore no
man−hours are allotted to prepare the aircraft for maintenance or to
prepare for this Service Bulletin.
0.5 man−hours are necessary to do PART A of this Service Bulletin.
Bombardier Aerospace does not pay for the labor to do PART A of this Service
Bulletin.
5.0 man−hours are necessary to do PART B of this Service Bulletin.
The labor required to do this Service Bulletin is at no cost if:
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 3 of 11

### Page 5

− this Service Bulletin is scheduled before 36 months from Service Bulletin
released date (Basic Issue).
G. Material − Cost and Availability
No kit is necessary to do this modification. For material data, refer to
Paragraph 3.C.
The RAT Deployment Actuator, Part No. BZ02001−01 (GL456−1301−1) in
Paragraph 3.B. is necessary to do PART B of this modification.
The RAT Deployment Actuator, Part No. BZ02001−01 (GL456−1301−1) is available
at no cost if:
− a no−charge purchase order is sent to Bombardier Aerospace Parts Services,
Montreal in less than 36 months from this Service Bulletin release date
(Basic Issue).
Send RAT Deployment Actuator, Part No. BZ02001−01 (GL456−1301−1) for
upgrade to Bombardier Aerospace at one of the two addresses given below:
Learjet Inc − Core Returns
251−A Wille Road
Des Plaines, Illinois
60018−1861
U.S.A
or
Distribution Centre Frankfurt − Core Returns
Bombardier Aerospace Germany GmbH
Hans−Boeckler−Strasse 9
GROSS−GERAU Hesse 64521
Germany
Refer to your Material Return Authorization (MRA) form to find the applicable return
address.
NOTE: Bombardier Aerospace is maintaining a rotable pool of replacement RAT
Deployment Actuator, to be supplied to the operators under the terms and
conditions given below:
The removed RAT Deployment Actuator BZ02001−01 (GL456−1301−1)
must be returned to Bombardier Aerospace Parts Services in less than 10
days of receipt of replacement unit, with documentation showing the serial
number of the aircraft.
If the removed RAT Deployment Actuator BZ02001−01 (GL456−1301−1)
is not returned in less than 10 days, the operator will be charged for the
replacement unit.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 4 of 11

### Page 6

For all parts transactions, Bombardier Aerospace’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply. These
terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com
During or after the above free period, Smart Parts Plus does not pay for the part.
Part B of this Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited availability of
rotable stock, parts and/or kits. Parts are limited, therefore, advance part
scheduling with our In−Service Implementation Team (ISIT) is recommended prior
to a maintenance visit. Please contact your Regional Manager (RM), Field Service
Representative (FSR) or Customer Service Representative (CSR) to schedule your
aircraft as there is a limited availability. The parts will be allocated on a first come
first serve basis.
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
GSE 10X−12−18 763485 Cover − RAT Blades
GSE 24X−23−02 83740162 Tool, RAT Actuator
Travel Measuring
− Commercially Available Container, Hydraulic
Fluid
− Commercially Available Torque Wrench 10.84 to
14.60 lbf ft (14.7 to 19.8
Nm)
− Commercially Available Torque Wrench 19.58 to
21.25 lbf ft (26.55 to
28.81 Nm)
− Commercially Available Torque Wrench 20.00 to
24.16 lbf ft (27.12 to
32.76 Nm)
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 5 of 11

### Page 7

GSE REFERENCE NO. PART NO. DESCRIPTION
− Commercially Available Grease Gun
(Non−Pneumatic)
NOTES: 1. Refer to the Global Express or Global Express XRS, Illustrated Tool
and Equipment Manual (ITEM) to make sure that you use the correct
equipment configuration.
2. Refer to the Liability Statement in the ITEM for the BD700 or BD700
XRS, for acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail. Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
No change.
J. Electrical Load Data
No change.
K. References
− SAFRAN, Service Bulletin 24−03 (Attached).
− TCCA Airworthiness Directive (pending).
− UTC Aerospace Systems Service Bulletin No. ERPS11A−24−1 (Attached).
− Global Express BD−700 Aircraft Maintenance Manual (AMM), Chapters 6, 12,
24 and 29.
− Global Express XRS BD−700 Aircraft Maintenance Manual (AMM), Chapters 6,
12, 24 and 29.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 51.
L. Other Publications Affected
None.
M. Equivalent Service Bulletin
− For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−24−029.
− For the Global 6000 BD−700−1A10 aircraft, use SB 700−24−6015.
− For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft,
use SB 700−24−5015.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 6 of 11

### Page 8

2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Global Express
or Global Express XRS BD−700, Aircraft Maintenance Manual (AMM)
unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
Global Express or Global Express XRS BD−700, Aircraft Maintenance
Manual (AMM), Chapter 6.
A. Aircraft Setup
NOTE: The steps in the Aircraft Setup section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator’s discretion.
(1) Obey all the hydraulic safety precautions. Refer to AMM 29−00−00−910−801.
(2) Obey all the hydraulic technical precautions. Refer to
AMM 29−00−00−910−802.
(3) Obey all the electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(4) Set the circuit breakers that follow to out (on aircraft pre Service Bulletin
700−24−045) or LOCKED (on aircraft, Serial No. 9123 and subsequent or post
Service Bulletin 700−24−045) Refer to AMM 24−00−00−863−801.
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
ELEC RAT DEPLOY BATT
ELEC RAT GEN HEAT DC 1
(5) Install a warning placard on the RAT manual release lever to make sure the
lever is not used.
(6) Open the forward equipment compartment door (212AR).
B. Part A − Special Check
(1) Do the manual extension of the RAT. Refer to AMM 24−23−01−840−801.
(2) Examine the RAT Deployment Actuator, Part Number BZ02001−01
(GL456−1301−1) nameplate to get the serial number. Record the serial
number.
NOTE: Make sure to examine the UTAS, Part No. 762830. If the part number
is followed by the suffix “A”, go to Paragraph 2.E.
(3) If the RAT Deployment Actuator, Part Number BZ02001−01 (GL456−1301−1)
serial number is shown in Table 1 of the attached VSB No. ERPS11A−24−1,
go to Paragraph 2.C.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 7 of 11

### Page 9

(4) If the RAT Deployment Actuator, Part Number BZ02001−01 (GL456−1301−1)
serial number is shown in Table 2 of the attached VSB No ERPS11A−24−1 or
the serial number is 0275 or subsequent, retract the RAT Deployment
Actuator. Refer to AMM 24−23−01−840−803. Go to Paragraph 2.E.
C. Part B − Modification
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
and to get an approved disposition to complete this Service Bulletin.
(1) Remove the RAT Deployment Actuator, Part Number BZ02001−01
(GL456−1301−1). Refer to AMM 24−23−09−000−801.
(2) Return the RAT Deployment Actuator, Part Number BZ02001−01
(GL456−1301−1) to the address shown in Paragraph 1.G. and install the
upgraded RAT Deployment Actuator, Part Number BZ02001−01
(GL456−1301−1). Refer to AMM 24−23−09−400−801.
(3) Go to Paragraph 2.D.
D. Testing
(1) Do an electrical bonding test of the RAT Deployment Actuator. Refer to
SPM−MM 51−80−00−760−801.
(2) Retract the RAT Deployment Actuator. Refer to AMM 24−23−01−840−803.
(3) Do a quantity check of the hydraulic fluid in the retraction pump. Refer to
AMM 12−12−05−210−801.
(4) Do an operational test of the RAT Deployment Actuator as follows;
(a) Do the manual extension of the RAT Deployment Actuator. Refer to
AMM 24−23−01−840−801.
(b) Do the retraction of the RAT Deployment Actuator. Refer to
AMM 24−23−01−840−803.
E. Close−Out
NOTE: The steps in the Close−out section of this Service Bulletin, except for the
return−to−service tests, are recommended steps. The steps give a
recommendation to install components removed during the Aircraft Setup.
This recommendation is to make sure that the aircraft is safe and ready to
return to service. Alternative steps can be used at the operator’s
discretion.
(1) Remove the warning placard from the manual release lever.
(2) In the flight compartment, on the ELECTRICAL control panel, set the BATT
MASTER switch to ON.
(3) In the flight compartment, on the EMS CDU, set the circuit breakers that follow
to IN.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 8 of 11

### Page 10

SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
ELEC RAT DEPLOY BATT
ELEC RAT GEN HEAT DC 1
(4) In the flight compartment, on the ELECTRICAL control panel, set the BATT
MASTER switch to OFF.
(5) Remove all tools, equipment and unwanted materials from the aircraft.
(6) Close the forward equipment compartment door (212AR).
F. Recording
When any PART of this Service Bulletin is completed, make an entry in the aircraft
log and send the attached Incorporation Notice to Bombardier Business Aircraft
Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback. Please take a moment to fill out our easy on−line Service
Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
No kits required.
B. Parts
The part that follows is necessary to do PART B of this Service Bulletin and is
available from Bombardier Aerospace Parts Services, Montreal:
NEW PART NO. QTY ITEM USED PART
NO.
INSTRUCTIONS
- DISPOSITION
BZ02001−01
(GL456−1301−1)
1 Actuator,
RAT
Deployment
BZ02001−01
(GL456−1301−1)
Refer to
Paragraph 1.G.
MS14144L7
(See Note 2)
1 Nut,
Self−Lkg,
Cstl
MS14144L7 −
MS14145−8
(See Note 2)
1 Nut,
Self−Lkg,
Cstl
MS14145−8 −
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 9 of 11

### Page 11

NEW PART NO. QTY ITEM USED PART
NO.
INSTRUCTIONS
- DISPOSITION
MS24665−302 2 Pin, Cotter MS24665−302 −
NOTES: 1. The part number for the item listed above is subject to change without
revision to this Service Bulletin. In case of discrepancy between this
list and any other list, the Illustrated Parts Catalog prevails and shall
be used to determine the latest part number.
2. The nut is only to be replaced if the self−locking feature is no longer
effective.
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aerospace does not pay
for these consumables.
DESCRIPTION PART
NO./NAME
SPECIFICATION QUANTITY SUPPLIER
(SEE
NOTE)
Compound,
Corrosion
Inhibitor
Mastinox
6856K or CA
1000
BAMS 552−010 As Necessary Code: A
Fluid,
Hydraulic,
Phosphate
Ester
Fire−Resistant
HYJET IV−A
Plus
or
Skydrol LD−4
BAMS 564−003 As Necessary Code: A
Grease,
Molybdenum
Disulfide
Syn−Tech
NS−5806−G
− As Necessary Code: A
NOTES: 1. Refer to the table that follows for each suppliers address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 10 of 11

### Page 12

SUPPLIERS ADDRESSES BY CODES
Code: A
Commercially Available
D. Publications
No publications required.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 22/2019 700−24−090
Page 11 of 11

### Page 13

700−24−090 Basic Feb 22/2019
SPECIAL CHECK/MODIFICATION − EMERGENCY AC−POWER SUPPLY
− REPLACEMENT OF THE RAM AIR TURBINE (RAT) DEPLOYMENT
ACTUATOR PART NO. BZ02001−01 (GL456−1301−1)
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 14

SERVICE BULLETIN INCORPORATION SHEET − "700−24−090"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
700−24−090 Basic
COMPLIED WITH
YES    NO    N/A
PART A
PART B
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
