# Bombardier Service Bulletin 700-26-6003

Copy: Revision 03 ("700-26-6003 Rev03"), 17 pages: PDF https://openairdocs.org/files/sha256/60/76/6076a8a59881087bf934581d010e015e8d98a7fa91220ad2597c0b3c40858f16; text https://openairdocs.org/service-documents/bombardier/sb-700-26-6003/file/6076a8a59881.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0585; AD 2018-22-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-26-6003
- Latest revision known: 700-26-6003, Revision 03, dated August 24, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-26-6003

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-22-08](https://openairdocs.org/ad/2018-22-08.md), effective Dec 10, 2018: Revisions 01, 02 and 03

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-700-26-6003/proposed.md).

## Text (17 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0585; AD 2018-22-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Revision 02 of this Service Bulletin dated Jul 27/2018, and replace in its
entirety with Revision 03.
Service Bulletin No. 700−26−6003
Date of Basic Issue Dec 28/2017
Revision No. 01 Dated Feb 15/2018
Revision No. 02 Dated Jul 27/2018
Revision No. 03 Dated Aug 24/2018
This revision has no effect for aircraft on which the Basic Issue or Revision 01 or
Revision 02 of this Service Bulletin was done thus no other action is necessary. Do
not sign the log book if you have not done this revision. Keep the previous log book
entry. You may make an entry as “Not Applicable” for this revision.
This revision is issued to:
1. Revise, in Paragraph 1.I, W&B is No Change.
2. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL BD−700−1A10 (BD−700)
700−26−6003
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

SPECIAL CHECK/MODIFICATION - FIRE EXTINGUISHING SYSTEM -
SQUIB CONNECTORS A111P2, A112P1 AND A111P3 WIRE LENGTHS
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 1000 flight hours or 15 months,
whichever comes first
EFFECTIVITY: A/C Serial No. 9313, 9381 and 9432 to 9839
MANPOWER: 1.5 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE NOYES
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin is subject to an Airworthiness Directive CF−2018−08R1,
which will make it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 26−21
FIRE PROTECTION
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 1 of 1
This Service Bulletin is available at:

### Page 3

SPECIAL CHECK/MODIFICATION - FIRE EXTINGUISHING SYSTEM -
SQUIB CONNECTORS A111P2, A112P1 AND A111P3 WIRE LENGTHS
1. PLANNING INFORMATION
NOTE: Before you do this bulletin, examine all STC, STA or equivalent action
changes to make sure that this bulletin can be completed.
A. Effectivity
BD−700−1A10 aircraft, Serial No. 9313, 9381 and 9432 to 9839
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
B. Reason
1. Condition:
It was discovered that the wire lengths of connectors A111P2 and A111P3 of
FIREX bottle No. 1 and A112P1 of FIREX bottle No. 2 allowed for
interconnection of connectors between bottles.
2. Evidence:
The connectors from the FIREX bottles all have the same connector keyway,
thus the potential for the aircraft harness connectors to be connected to the
wrong mating connector on the FIREX bottles.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 26−21
FIRE PROTECTION
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2017−2018 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 1 of 13
This Service Bulletin is available at:

### Page 4

3. Objective/Benefit:
The incorporation of this Service Bulletin will eliminate the possibility of the
aircraft harness connectors to connect to the wrong mating connectors on the
FIREX bottles.
C. Description
This Service Bulletin gives instructions to:
− Get access to the FIREX system discharge cartridges,
− Verify that the aircraft harness connectors are connected to the appropriate
mating connector on the discharge cartridges,
− Install lanyards on affected connectors, and
− Do the necessary tests to make sure that the system operate(s) correctly as
required.
D. Compliance
Recommended within 1000 flight hours or 15 months, whichever comes first
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, send an SRPSA for analysis to
get an approved disposition to complete this Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 2 of 13

### Page 5

F. Manpower
NOTES: 1. The man−hours given are to help you schedule the tasks given in this
Service Bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to SB
700−00−6002.
2. Labor hours are based on the fact that the modification will be done at
the next scheduled maintenance task or inspection. Therefore no
man−hours are allotted to prepare the aircraft for maintenance or to
prepare for this Service Bulletin.
1.5 man−hours are necessary to do this special check/modification.
NOTE: It is assumed that the equipment has been put in a
maintenance status. The man−hour estimates do not
include time for preparation, jacking of the aircraft,
close−out or administrative functions.
The labor required to do this Service Bulletin is at no cost if:
− the work is done at Bombardier Business Aviation Services
(BBAS) or Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled within 1000 flight hours or 15
months, whichever comes first, from its release date (Basic
Issue).
G. Material − Cost and Availability
Kit 700K26−6003 is necessary to do this special check/modification.
KIT NO. PRICE
700K26−6003 Please contact Bombardier Aerospace
Parts Services, in Montreal, for delivery
lead times and confirmation of prices.
Sufficient kits will be kept for the estimated amount of orders.
The kit can be purchased by sending a purchase order to Bombardier Aerospace
Parts Services, Montreal.
This kit is available at no cost if:
a no−charge purchase order is sent to Bombardier Aerospace in less than 1000
flight hours or 15 months, whichever comes first, from this Service Bulletin release
date Basic Issue.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 3 of 13

### Page 6

Smart Parts Program will not pay for the kit(s).
H. Tooling
The equipment and tools listed below are necessary to do this special
check/modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
GSE 20X−10−01 S4933959−501 Tag, Circuit Breaker (Red
Ring)
NOTES: 1. Refer to the Global 6000 Illustrated Tool and Equipment Manual
(ITEM) to make sure that you use the correct equipment
configuration.
2. Refer to the Liability Statement in the ITEM, for the G6000 for
acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail. Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
No Change
J. Electrical Load Data
No change.
K. References
− Bombardier Aerospace, Modification Summary, R700T400673, Rev. B−1.
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C−01694,
Rev. A−1.
− Bombardier Aerospace, Kit Drawing KGC991−1551, Rev. A.
− TCCA Airworthiness Directive, CF−2018−08R1.
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 26,
52 and 53.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 26.
L. Other Publications Affected
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 26.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 26.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 4 of 13

### Page 7

M. Equivalent Service Bulletins
For the Global Express and Global Express XRS BD−700−1A10 aircraft, use SB
700−26−011.
For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−26−004.
For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft,
use SB 700−26−5003.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Global 6000
BD−700−1A10, Aircraft Maintenance Manual (AMM) unless otherwise
specified.
2. All references made to zones, access panels and/or doors, are from the
Global 6000 BD−700−1A10, Aircraft Maintenance Manual (AMM),
Chapter 6.
A. Aircraft Setup
NOTE: The steps in the Aircraft Setup section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator’s discretion.
(1) Obey all the electrical/electronic safety precaution. Refer to
AMM 24−00−00−910−802.
(2) Obey all the electrostatic discharge safety precautions. Refer to
AMM 24−00−00−910−802.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 5 of 13

### Page 8

(3) In the flight compartment, on the EMS CDU, set the circuit breakers that follow,
in the specified sequence, to LOCKED. Refer to AMM  24−00−00−863−801:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
FIRE FIRE DETECT CH A BATT
FIRE FIRE DETECT CH B BATT
NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIDEEX
system.
(4) Open and tag, in the specified sequence, the circuit breakers that follow:
LOCATION CB NO. NAME ZONE
DCPC A1 FIREX CH A 130
DCPC A2 FIREX CH B 130
NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIDEEX
system.
(5) In the flight compartment, on the EMS CDU, set the circuit breakers that follow
to LOCKED. Refer to AMM  24−00−00−863−801:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
FIRE APU FIRE HANDLE BATT
FIRE L FIRE HANDLE BATT
FIRE R FIRE HANDLE BATT
(6) Open the APU access doors. Refer to AMM 52−43−00−010−801.
(7) Remove the tailcone access panel (310BZ) Refer to
AMM 53−50−01−000−801.
B. Inspection/Modification
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the configuration of the aircraft, submit an SRPSA for analysis
to get an approved disposition to complete this Service Bulletin.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 6 of 13

### Page 9

WARNING: MAKE SURE THAT THE ELECTRICAL CIRCUITS ARE NOT
ENERGIZED WHEN YOU CONNECT THE ELECTRICAL
CONNECTOR TO THE DISCHARGE CARTRIDGE. IF THE
ELECTRICAL CIRCUITS ARE ENERGIZED, THE DISCHARGE
CARTRIDGE CAN FIRE ACCIDENTALLY. THIS CAN CAUSE
INJURY TO PERSONS OR DAMAGE TO THE EQUIPMENT.
(1) Inspect connectors A111P2, A112P1 and A111P3 as follows:
(a) Verify that aircraft connectors A111P2, A112P1 and A111P3 are
connected to the correct mating connector on the FIREX bottle No 1. and
FIREX bottle No. 2.
The connectors A111P2 and A111P3 must be connected to the FIREX
bottle No. 1 and connector A112P1 must be connected to the FIREX bottle
No. 2. Refer to Kit Drawing KGC991−1551.
NOTE: Refer to the connectors Identification labels, which are located on
the aircraft structure and on the connectors harness side, to
make sure that they are correctly connected.
The mentioned connectors all have the same keyway thus the
possibility of misconnection.
(b) If any connectors in Paragraph 2.B.(1) are not correctly connected to their
mating connectors, disconnect and connect them to the appropriate
mating connectors on the FIREX bottles. Use the new lanyards as per
instructions given in Kit Drawing KGC991−1551 and continue with
Paragraph 2. B.(2) below.
NOTE: If connectors are all connected correctly, continue with Paragraph
2.B.(2) below.
(2) Install split ring lanyards Part No. 670−001H07−54−5.5, to connectors A111P2,
A112P1 and A111P3 as follows:
(a) Loosen backshell to install the lanyard between the backshell and
connector.
(b) Attach one end of the split ring lanyard to the fastener of the last clipping
point for connectors A111P2, A112P1 and A111P3. Use lanyard Part No.
670−001H07−54−5.5. Refer to Kit Drawing KGC991−1551.
NOTE: It is also permissible to rotate the clamps of the last clipping point
for all connectors to minimize fouling condition between the
lanyard and the adjacent parts.
(c) Attach the split ring side of the lanyard to the connectors. Refer to Kit
Drawing KGC991−1551.
NOTE: You should be able to install the split ring side of the lanyards
without disconnecting the connectors from the FIREX bottles.
After the installation of the lanyards, the connectors length after
the last clipping point will be restricted thus eliminating the
possibility of misconnection.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 7 of 13

### Page 10

(d) Torque clamp screws from 20 to 25 lbf in (2.26 to 2.82). Refer to SPM
Chapter 20 "Torquing of Threaded Fasteners".
(3) In the flight compartment, on the EMS CDU, set the circuit breakers that follow
to IN. Refer to AMM 24−00−00−863−802:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
FIRE APU FIRE HANDLE BATT
FIRE L FIRE HANDLE BATT
FIRE R FIRE HANDLE BATT
(4) Remove the tags and close, in the specified sequence, the circuit breakers that
follow:
LOCATION CB NO. NAME ZONE
DCPC A1 FIREX CH A 130
DCPC A2 FIREX CH B 130
NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIREX
system.
(5) In the flight compartment, on the EMS CDU, set the circuit breakers that follow,
in the specified sequence to IN. Refer to AMM 24−00−00−863−802.
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
FIRE FIRE DETECT CH B BATT
FIRE FIRE DETECT CH A BATT
NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIDEEX
system.
C. Testing
(1) If any of the connectors were disconnected from the FIREX bottles, do the
operational test of the fire extinguishing system. Refer to
AMM 26−21−00−710−801.
(2) On the engine indication and crew alerting system (EICAS), on the primary
page, make sure you do not get FIDEEX fault messages.
(3) Remove the electrical power from the aircraft as required. Refer to
AMM 24−00−00−861−802.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 8 of 13

### Page 11

D. Close−out
NOTE: The steps in the Close−Out section of this Service Bulletin, except for the
return−to−service tests, are recommended steps. The steps give a
recommendation to install components removed during the Aircraft
Set−Up. This recommendation is to make sure that the aircraft is safe and
ready to return to service. Alternative steps can be used at the operator
discretion.
(1) Install the tailcone access panel (310BZ). Refer to AMM 53−50−01−400−801.
(2) Remove all tools, equipment, and unwanted materials from the work area.
(3) Close the APU access doors. Refer to AMM 52−43−00−410−801.
E. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback. Please take a moment to fill out our easy on−line Service
Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
Kit 700K26−6003 is necessary to do this Service Bulletin and contains the parts
that follow:
NEW PART NO. QTY ITEM USED
PART NO.
INSTRUCTIONS
-
DISPOSITION
670−001H07−54−5.5 3 Lanyard
Assembly
N/A N/A
NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit
Parts List contained in the respective kit, then the latter list prevails.
2. The actual quantity for some of the hardware contained in the kit can
be greater than the amount shown in the table as these items are
supplied in prepackaged quantities.
B. Parts
No parts required.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 9 of 13

### Page 12

C. Material
No consumables are required.
D. Publications
The publications that follow are required after this Service Bulletin has been
incorporated.
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 26.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 26.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 10 of 13

### Page 13

MODEL BD−700−1A10 (BD−700)
PL KGC991−1551 − Fireex Squibb Connectors Lanyard Installation
(Sheet 1 of 1, Rev. A)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 11 of 13

### Page 14

KGC991−1551 − Fireex Squibb Connectors Lanyard Installation
(Sheet 1 of 1, Rev. A)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 12 of 13

### Page 15

KGC991−1551 − Fireex Squibb Connectors Lanyard Installation
(Sheet 1 of 1 − continued, Rev. A)
Basic Issue: Dec 28/2017
Revision 03: Aug 24/2018
700−26−6003
Page 13 of 13

### Page 16

700−26−6003 Rev. 03 Aug 24/2018
SPECIAL CHECK/MODIFICATION − FIRE EXTINGUISHING SYSTEM −
SQUIB CONNECTORS A111P2, A112P1 AND A111P3 WIRE LENGTHS
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 17

SERVICE BULLETIN INCORPORATION SHEET − "700−26−6003"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
700−26−6003 03
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
